Home > ELECTRICAL > HOUSEHOLD ELECTRICAL > HOUSEHOLD WIRING DEVICES > CORD ENDS-FEMALE 220V
Sort By:
1
Cooper 1301-7B Framed Grounding Toggle Switch Cooper 1301-7V Framed Grounding Toggle Switch Cooper 1301-7W Framed Grounding Toggle Switch
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Arrow Hart STE8V Mid Size Wall Plate Arrow Hart STE7V Mid Size Wall Plate Arrow Hart STC7W Mid Size Wall Plate
End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE7W Mid Size Wall Plate Arrow Hart STC8W Mid Size Wall Plate Arrow Hart STC8V Mid Size Wall Plate
End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C.
Arrow Hart STE8W Mid Size Wall Plate Arrow Hart STC7V Mid Size Wall Plate Cooper 7500-Box Decorative Standard Rocker Switch
End plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted. Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Center Plate. Thermoplastic construction for durability and flexibility. Easy to snap together and lock. Mid-size design to fit over most existing wall openings. Screw-Catch feature holds already attached mounting screws captive for easy installation. Screws are slotted steel, baked enamel and painted.  Meets current Federal specifications as tested to UL 514. Meets all CSA requirements C22.2, No. 42.1., CSA file #9294 (4413-02), UL and cUL Listed, UL File #E33216. NEMA WD-1, WD-6. Temperature rating -40 degrees C to 65 degrees C. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Cooper 7500-Box Decorative Standard Rocker Switch SWITCH/ROCKER 1P LA           Arrow Hart CSB GRD Pro Toggle Switch
SWITCH/ROCKER 1P LA
Our Price: $2.69
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified.
Arrow Hart CSB GRD Pro Toggle Switch SWITCH AC QUIET LT ALMOND     Arrow Hart CS Compact Toggle Switch
Small toggle switch blends with standard grade toggles. Larger contacts, backwire clamps on the side terminals. Side wire terminals accept up to number 10 solid wire. Back wire terminal accepts 12 or 14 gauge wire. Heavy duty cam action mechanism. Long, broad steel mounting strap, zinc-plated for corrosion resistance. Built-in wire stripper for number 12 and number 14 wire. Ground screw terminal, stippled line and ground contacts standard. Tri-Combo head mounting and terminal screws. 15 amp, 120/277 volt. cULus Listed, NOM certified. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896.
Arrow Hart CS Compact Toggle Switch Arrow Hart Eagle CS Lighted Toggle Switch Cooper 1301-7 Framed Grounded Toggle Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. Meets all UL 20 requirements, Federal specifications WS896. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1301-7 Framed Grounded Toggle Switch Arrow Hart PJS8 Mid Size Screwless Wall Plate Arrow Hart PJS8 Mid Size Screwless Wall Plate
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size duplex receptacle plate, clearly marked top edges, clip easily into place with gentle pressure. Mid-sized to cover wall imperfections and large wallboard openings. Mid-size - 4.875" x 3.125". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screwless mid-size duplex receptacle plate, clearly marked top edges, clip easily into place with gentle pressure. Mid-sized to cover wall imperfections and large wallboard openings. Mid-size - 4.875" x 3.125".
Cooper 5221-7 Grounded Standard Toggle Switch Eagle 5221-7 Grounded Standard Toggle Switch Powerzone OR501608 SJTW Round Extension Cord
Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed. Meets all UL 20 requirements. For direct connection to aluminum or copper wire. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Side wire terminals accept up to #10 solid or stranded wire. Terminal screws are backed out-ready for wiring. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. UL Listed. Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved.
Gardner Bender GSW-32 Pull Chain Switch Arrow Hart PJ8EMRD Mid Size Wall Plate Legrand Despard ADC1I Toggle Switch
Mounts in 13/32" diameter hole. Two position, 2 wire. (GSW-35 mounts in 1/2" diameter hole). number 18 AWG, 6" stripped wire leads. Molded from non-flammable Polycarbonate, pre-marked "EMERGENCY" with indelible printing guaranteed not to fade, bleed or rub off. High letters for easy identification. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Older style device with a rounded shape that is slightly flattened top and bottom. Flexible, smaller than a standard device, fits in a smaller opening. Used in locations with limited space or restricted options. UL Listed, conforms to NEMA specifications.
GB-Gardner Bender GSW-39 Canopy Switches Core Aspire 9501DS Rocker Switch Core Aspire 9501WS Rocker Switch
Momentary action. Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Recommended mounting hole .406 diameter. 4 position 3 wire. Wire lead terminal type. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt.
Core Aspire 9501SG Rocker Switch SWITCH DEC SP 15A 120/277V ORB SWITCH DECO SP 15A 120/277V SG
Curved profile rocker, accented by the color and texture of its surrounding frame, with two-tone elegance. Virtually unbreakable, ultrasonically welded top and backbody; extra-long, extra-wide mounting straps; #14 push-in terminals; backwire clamps on side terminals; easy-access ground screws and built-in wire strippers. 15 amp, 120/277 volt. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Jandorf 61202 Canopy Switch Cooper LZR000212P Mini Track Light Connector Arrow Hart Eagle CS Lighted Toggle Switch
Jandorf Pull Chain Switch, 2-Speed, 125 V, 3 A, 1 Poles, 2 Circuits, Off/On/On, 3-Push Terminal, Brass, Standards: UL Listed For joining two sections end-to-end. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Powerzone ORFL10506 Floodlight Kit Arrow Hart CS Lighted Toggle Switch Arrow Hart CS Lighted Toggle Switch
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Toggle Switch Arrow Hart Eagle CS Toggle Switch SWITCH TOGGLE LT ALMOND 20A
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Jandorf 61200 Canopy Switch Jandorf 61208 Canopy Switch Gardner Bender GSW-34 3-Speed Pull Chain Switch
Jandorf Pull Chain Switch, 125 V, 3 A, 2 Poles, 4 Positions, 2 Circuits, Off/L1/L2/L1-2, 3-Wire Terminal, Brass, Standards: UL Listed Jandorf Pull Chain Switch, 125 V, 3 A, 1 Poles, 1 Circuits, On-Off, 2-Wire Terminal, Nickel, Standards: UL Listed Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Mounts in 13/32" diameter hole.
Cooper C1301-7LTW Lighted Grounding Toggle Switch Cooper C1301-7LTV Lighted Grounding Toggle Switch Cooper 1301-7V10 Framed Grounding Toggle Switch
Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Push-in terminals accept number 12 or 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Carded. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Push-in terminals accept number 12 or 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Carded. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed.
Cooper 1301-7W10 Framed Grounding Toggle Switch Powerzone OR501615 SJTW Round Extension Cord Woods 0260 SJTW Extension Cord
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Manufactured with stranded and cabled copper conductors and solid molded plugs for longer life. Outer jacket wont mark floors or walls. SJTW cords resist deterioration from moisture and abrasion. 300 volt wire rating. Sleeved.
Area Lighting CPGI-ALR-LC-120 Photocontrol SWITCH TOGGLE SP GROUNDED LA  Arrow Hart Eagle CS Toggle Switch
Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Unbreakable top and bottom housing. Industrial design cam action mechanism insures quiet switch action. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper for pre-looping. Double riveted switch. Three way switches feature additional push-in common termination for feed-through tapping. Push-in terminals accept number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips and Robertson-head terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. UL Listed. Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896.
Arrow Hart Eagle CS Lighted Toggle Switch Arrow Hart 5132 Standard Wall Plate Cooper 7500 7511V-BOX Decorative Lighted Standard Rocker Switch
Side wire terminals accept up to number 10 solid or stranded wire. Rated for fluorescent lighting fixtures typical in commercial applications. .050" thick steel mounting strap zinc-plated for corrosion resistance. Ground screw terminal standard. 20 amp, 120/277 volt. Meets all UL 20 requirements, Federal Specifications WS 896. Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 2.75" x 4.50". Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Cooper 7500 7511W-BOX Decorative Lighted Standard Rocker Switch Coleman Cable 0430 Yard Master Floodlights GB-Gardner Bender GSW-33 Canopy Switches
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included.  Polybagged. UL Listed. Variable speed and two-circuit brass plated pull chain switches for multifunction applications. Push-in connections for #18 AWG wire. Mounts in 13/32" diameter hole.
Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol Woods 0720 SJTW Outdoor Extension Cord AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control
Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Made of stranded and cabled copper conductors and solid molded plugs for longer life. Orange outer jacket won't mark floors or walls. Resists deterioration from moisture and abrasion and has a 300 volt rating. UL Listed. Sleeved. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7".
Cooper 1301W Framed Non-Grounded Toggle Switch Cooper 1301V Framed Non-Grounded Toggle Switch Cooper 1301B Framed Non-Grounded Toggle Switch
Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Industrial design cam action mechanism. Built-in wire stripper for number 14 and number 12 wire. Built-in wire looper. Double riveted switch. Push-in terminals accept number 12 or number 14 solid wire only. Side wire terminals accept up to number 10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. 15 amp, 120 volt. Meets all UL 20 requirements.
Cooper 7500 C7501V-SP Decorative Grounded Standard Rocker Switch Cooper 7500 C7501W-SP-L Grounded Standard Rocker Switch Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol
Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed.
GB-Gardner Bender GSW-35 Canopy Switches Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol Cooper 4227 Straight Electrical Connector
Mounts in 13/32" diameter hole. Two position, all angle, 2 wire, mounts in 1/2" diameter hole. #18 AWG, 6" stripped wire leads. Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant. Terminals in individual chambers to positively insulate conductors. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out, ready for wiring. Nylon Kwiklok features patented twist-actuated internal cord clamp, reduces installation time. Meets all UL 498 requirements. Yellow color.
AmerTac 758M Post Eye Light Control Cooper 7500 C7511W-SP-L Lighted Standard Rocker Switch Cooper Wiring 277W-BOX Combination Devices
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Redesigned paddle. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements, file # E18704. Carded. Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws.
Cooper Wiring 277V-BOX Combination Devices Arrow Hart 271 Duplex Grounded Toggle Switch Arrow Hart 271V Duplex Grounding Toggle Switch
Single pole side wire switch. Grounding terminal screw standard. 15 amp, 120/277 volt rating. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light rating of 1/25 watt - 120 volt, may be wired to indicate power "on" or power "off". Combination slot/Phillips head mounting and terminal screws. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Arrow Hart 271W Duplex Grounding Toggle Switch AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control Cooper LZR000200P Track Live-End Feed
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65". With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only.
AmerTac 758FPCTCC-4 Dawn Light Control Cooper LZR000202P Laser Track Floating Canopy Feed Cooper 4229-BOX Grounded  Electrical Connector
AmerTac Dawn Light Control, 1800 W, 15 A, Dusk On - Dawn OFF Timing Range, 1100 VA Ballast, Lighting Control Control, Wire-In Connection, 5.4 in Overall Height, 3.6 in Overall Width, 2.1 in Overall Depth, Plastic, Includes: Bi-Metal Switch, 3-Wire, Infrared Technology, For Outdoor, Incandescent, Fluorescent, mercury vapor and Sodium Bulbs Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware. Terminals in individual chambers to positively insulate conductors. Terminal screw clamps are designed to contain wire and prevent binding. Terminal screws backed out, ready for wiring. Nylon Kwiklok features patented twist-actuated internal cord clamp, reduces installation time. Meets all UL 498 requirements. Yellow color.
Powerzone OR501625 SJTW Round Extension Cord Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35". Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed.
Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol Lutron FS-5FH-DK Rotary Control Switch Cooper LZR000203P Track Light L-Connector
Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed. Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off. To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers.
Glacier ORCW511615 Round Extension Cord Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control
Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved. For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed.
Bell 5792-0 Portable Spike Light Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol Arrow Hart Hart-Lock Safety Grip L620C
Locking swivel knuckle for positive lamp positioning and pin-point directional aiming. Die cast construction, powder coat finish. For 75-150 watt maximum, Par-38 type lamps, (not included). 15 amp/125 volt, 3 wire cord set included. Does not include mounting plate. Gray color. cULus Listed. Shrink wrapped. Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed. Abuse resistant thermoplastic construction. External cable clamp provides firm strain relief. Back wire terminal clamps for easy secure wiring. Triple combination head screws standard - slot/Phillips/Robertson for use in the US and Canada. .25" - .69" cord diameter.
Arrow Hart 7700 Decorator Duplex Combination Switch Arrow Hart 7700 Decorator Duplex Combination Switch SWITCH DPLX DECO LT ALMOND
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring both devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
Woods 0261 SJTW Extension Cord Halo LZR102P Miniature Linear Laser Track Light System React RFS5-W-K Fully Variable Non-Preset Rotary Control Switch
Manufactured with stranded and cabled copper conductors and solid molded plugs for longer life. Outer jacket wont mark floors or walls. SJTW cords resist deterioration from moisture and abrasion. 300 volt wire rating. Sleeved. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed.
React RFS5-V-K Fully Variable Non-Preset Rotary Control Switch Cooper Wiring 275V-BOX Combination Devices Cooper Wiring 275W-BOX Combination Devices
Use to moderate air flow and room temperature anywhere. Replaces any standard wall switch. Rated at 5 amp to allow several fans to operate simultaneously. Designed to operate ceiling fans using shaded pole or split capacitor motors only. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Lutron FSQ-2FH-DK Rotary Control Switch Powerzone OR501630 SJTW Round Extension Cord Glacier ORCW511625 Round Extension Cord
Includes 2 changeable control knobs, one ivory and one white to match either color wall plate, (wall plate sold separately). 3-speed control is for use with one ceiling paddle fan. Rotate to select one of three fan speeds: low, medium, or high, or rotary on/off. Variable speed control can be used with 1 or more ceiling paddle fans or exhaust fans (do not mix fan types on control). Rotate to select fan speed, rotary on/off. Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved.
CONTROL LIGHT MOTION          Patrol 7737V-BOX Night Light NIGHTLIGHT LED LA
CONTROL LIGHT MOTION
Our Price: $13.81
NIGHTLIGHT LED LA
Our Price: $13.82
Updated compact design fits more PAR fixtures. Automatically turns light on when motion is detected and off 10 minutes after last motion is detected. Senses activity at distances up to 20 feet away. 150 watt maximum bulb. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC.
Woods 591 Flat SPT-2 Extension Cord Powerzone OR883628 SJTW Extension Cord Woods 0722 SJTW Outdoor Extension Cord
Solid molded plugs and stranded all-copper conductors. Made with tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. 13 amp/125 volt. Sleeved. Water resistant and flame retardant. Ultra flexible in temperatures down to -40 degrees F and stands up to +140 degrees F. Oversized plugs. Strain relief prevents wire from separating from the plugs. cULus Listed. Sleeved. Made of stranded and cabled copper conductors and solid molded plugs for longer life. Orange outer jacket won't mark floors or walls. Resists deterioration from moisture and abrasion and has a 300 volt rating. UL Listed. Sleeved.
Arrow Hart Hart-Lock Safety Grip L630C Patrol 7737W-K-L Night Light Cooper Wiring 276V-BOX Combination Devices
Abuse resistant thermoplastic construction. External cable clamp provides firm strain relief. Back wire terminal clamps for easy secure wiring. Triple combination head screws standard - slot/Phillips/Robertson for use in the US and Canada. .25" - .69" cord diameter. Dimmable 3 LED nightlight for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 1 watt, 120 volt AC. Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed.
Cooper Wiring 276W-BOX Combination Devices Arrow Hart Hart-Lock Safety Grip L1420C Grounded Polarized Twist Lock Powerzone OR884628 SJTW Extension Cord
Grounding terminal screw standard. Combination switch with additional switch has 120/277 volt rating, ideal for fluorescent lighting fixtures typical in commercial applications. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. Break-off provision for wiring both devices on same circuit or on separate circuits. Terminal screws backed out and ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Combination slot/Phillips head mounting and terminal screws. Switches meet all UL 20 requirements. UL Listed. Abuse resistant thermoplastic construction. Back wire terminal clamps for easy secure wiring. External cable clamp provides firm strain relief. Individual wiring compartments with tapered channel for easy insertion of wires. Clear cover over wiring compartments allow easy inspection of wiring terminations. Triple combination head screws standard - slot/Phillips/Robertson for use in the US and Canada. Clearly marked rating, NEMA configuration and standard compliances on face. 20 amp - 125/250 volt. NEMA L14-20. Boxed. Meets OSHA specifications. UL, cULus Listed for outdoor use. Beige, sleeved.
Cooper LZR000208P Laser Track Light Cord/Plug Arrow Hart 3032 Lighted Toggle Switch Powerzone OR880628 SJTW Extension Cord
Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. Industrial design cam action mechanism insures quiet switch action. Color-coded faces identify amperage: blue-15 amp, red-20 amp, green-30 amp. Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure. Back and side wire terminals accept up to number 10 solid or stranded wire. Ground screw terminal standard. 0.050" thick steel mounting strap zinc-plated for corrosion resistance. 30 amp, 120/277 volt rating for fluorescent lighting fixtures. Combination slot/Phillips head mounting and terminal screws. Meets all UL 20 requirements, Federal specifications WS 896. Meets OSHA specifications. UL, cULus Listed for outdoor use. 125 volts.
Heathco HZ-5690-AL Light Fixture Arm Extension Zenith SL-5408-GR-A Motion Sensor Floodlight Zenith SL-5408-BZ Motion Sensor Floodlight
Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations.
Zenith SL-5408-WH-A Motion Sensor Floodlight Cooper EA24 Mounting Arm and Hardware Woods 0831 Flat SPT-2 Extension Cord
Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations. Extends light fixtures 24". Works with Cooper Lighting's NH Series mercury vapor lights, G Series and No.E70H high pressure sodium light fixtures. Includes mounting arm and hardware. Designed for general purpose indoor use. Features solid molded plugs and stranded all-copper conductors. Made of tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. Yellow, sleeved. Rental.
Cooper Lighting LZR000104P Lazer Lighting Tracks Cooper Lighting LZR000301P Halo Track Lights Cooper Wiring 7738V-BOX Arrow Hart Switch/Nightlights
Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704.
Cooper Wiring 7738W-K-L Arrow Hart Switch/Nightlights SWITCH/NIGHTLIGHT LED LA      Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock
SWITCH/NIGHTLIGHT LED LA
Our Price: $17.45
Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. Dimmable 3 LED nightlight combination with switch for bathrooms, hallways, stairs and landings. Flush-mounted, features low wattage LED lamps that consume a maximum of 1 watt of energy, rated for 50,000 hours lamp life. Full dimming as well as 3 preset levels. Sensor turns the nightlight on when ambient light is low, and off when ambient light is high. Built-in wire stripper speeds installation. 15 amp, 120 volt AC switch, 1watt, 120 volt AC nightlight. Temperature rating: 0 to 40 degreesC (32 to 104 degreesF). cULus Listed to UL20, file no. E18704. For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height.
Bell Weatherproof 5829-5 Floodlight Kits Bell Weatherproof 5818-6 Floodlight Kits Bell Weatherproof 5818-5 Floodlight Kits
Includes two die-cast zinc lampholders, with round zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For wet locations. Use Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed.
Cooper Wiring RDC15-V-K Fan/Light Controls Cooper RDC15-W-K Combination Switch Yellow Jacket 2886 SJTW Extension Cord With Powerlite Indicator Plug
Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed. Adjust lights and fans together. For overhead light/fan combination fixtures. Rated for 300 watt light. Designed to operate ceiling fans using shaded pole or split capacitor motors only. 4 speed with wire leads. UL Listed. Extra heavy, clear molded plugs are rugged, durable and oversized. Super flexible and abrasion resistant at any temperature. Made to meet OSHA specifications and UL Listed. 'PowerLite' indicator plug glows when the cord has power. 125 volts. Yellow. Sleeved.
Glacier ORCW511725 Tungsten Quartz Single Ended Extension Cord Cooper 7500 Decorative Standard Rocker Switch Cooper 7501V Decorative Standard Rocker Switch
Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements. Ultrasonic welding and integrated construction of the strap and body. Backwire clamps on the side terminals for installation of #12 and #14 wire. Thermoplastic rocker, top and backbody are virtually unbreakable. Screws accept slotted, Phillips and Robertson head tools for installation in both the U.S. and Canada. Longer, wider strap provides 40 percent more contact area to wall board. Virtually eliminates floating installations. Built-in wire stripper for #12 and #14 wire. Stippled ground screw standard. 15 amp, 120/277 volt AC rating for fluorescent lighting fixtures typical in commercial applications. Push in terminals accept #14 solid wire only. Temperature rating of -20 to 60 degrees C. Meets flammability requirements per UL 94, 6504, V2 rated, VO rated. UL and cUL Listed, Meets all UL20 requirements.
Bell 5638-5 Swivel Mount Photocontrol Maestro MS-OPS2H-IV Occupancy Sensor Switch Maestro MS-OPS2H-WH Occupancy Sensor Switch
Used for sunset activated automatic control of night lighting. Swivel switch, 1/2" NPT, 120 volt 50-60 HZ. Durable weatherproof construction. Built-in time delay to ignore auto headlamps or other temporary light flashes. Swivel switch, locknut. Fits with single lamp. 2000 watts. UL Listed. Automatically turn lights on and off with this wall-mounted switch. Turns lights on when anyone enters the room and turns them off when room is vacant. Uses Advanced XCT sensing technology. Up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire. Maximum capacity 150 watts CFL/LED. UL listed. Automatically turn lights on and off with this wall-mounted switch. Turns lights on when anyone enters the room and turns them off when room is vacant. Uses Advanced XCT sensing technology. Up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire. Maximum capacity 150 watts CFL/LED. UL listed.
Maestro MS-VPS2H-WH Vacancy Sensor Switch Arrow Hart Hart-Lock Safety Grip L1430C Lutron Electronics SFSQ-LFH-WH Fan/Light Controls
Requires lights to be manually turned on and will automatically turn lights off when the room is vacant. Works with all bulb types and meets California Title 24 and other sensor code requirements. Requires ground wire. UL Listed. Arrow Hart Hart-Lock Safety Grip Electrical Connector, Grounded, Locking, Polarized, 3 Poles, 4 Wires, 16 - 12 AWG Wire, 30 A, 125/250 V, Nema L14-30, 3-3/4 in Overall Length, 2.31 in Overall Width, 1.22 in Overall Depth, Nylon, Black/White, UL Listed, 0.63 - 1.16 in Cord Diameter, For Industrial Applications Rocker switch turns light on/off. Single pole, 1.5 amp 3 speed fan control with light switch. Wallplate not included.
Powerzone ORK506725 SJTW Extension Cord Woods Cold Flex SJTW Outdoor Extension Cord With Powerlite Lightened End Cooper Lighting LZR000301P/W Halo Track Lights
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Designed for use in extreme cold weather environments. Cord will stay flexible down to -58 degrees Fahrenheit. Manufactured with Powerlite plug, female end lights when power is on. UL Listed, meets OSHA specifications. Blue. Sleeved. White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust.
Cooper Lighting LZR000304P/W Halo Track Lights Cooper Lighting LZR000330P Halo Track Lights Powerzone OR501635 Tungsten Quartz Double Ended Extension Cord
For use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types. 4" width x 5-3/8 depth, maximum extension 8-1/4". Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16". Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved.
Bell 5883-5 Weatherproof Floodlight Kit Bell Weatherproof 5883-6 Dusk To Dawn Floodlight Kits Arrow Hart 7700 Decorator Single Combination Switch
Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated.
Arrow Hart 7700 Decorator Single Combination Switch SWITCH DECO COMBO 3SP 15A LA  LAMP LED SILVER WIRELESS
High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. High-impact resistant thermoplastic rocker, top and backbody. Injection molded housings and PVC resin, comply with UL94 V0 flammability ratings. Tri-combo screw heads, built-in wire stripper. Backwire clamps on side terminals for installation of #12 and #14 wire. Terminal screws are backed out for easier and faster wiring. Thick (0.045"/1.14mm) steel mounting strap is zinc-plated. Automatic grounding system eliminates the need for bonding jumper in grounded metal enclosure and provides redundant measure of ground continuity where a jumper is used. 120/277 volt AC, 15 amp rocker switches with break-off provision for wiring devices on the same circuit or on separate circuits. UL, cUL Listed and NOM 426 rated. Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included).
LAMP LED BRONZE WIRELESS      LAMP LED WHITE WIRELESS       Glacier ORCW511630 Round Extension Cord
Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Indicator light in the female end connector shows when the power is on. Cord stays flexible down to -58 degrees, stands up to 140 degrees Fahrenheit. Water, flame and abrasion resistant. Molded-on plug and connector with heavy-duty strain relief. cULus listed. Blue. Sleeved.
Prime Wire and Cable CB614725 No Overload Extension Cords American Tack OMLC5BC Westek Photo Control Lutron Electronics SFSQ-FH-WH Skylark Fan Controls
Features circuit breaker in the plug, with a reset button. Water resistant, flame retardent, ultra flexible to -40 degrees Fahrenheit. 14/3 SJTW. Red. Sleeved. UL listed, meets OSHA requirements. Outdoor motion activated light control with selectable off times. Turns on when motion is detected, off at user programmed time, 1 / 2 / 5 / 10 or 20 minutes. Fixed position switch retains setting in the event of a power outage. 180 degree sensing window, 30' detection zone. Ball joint for full adjustability, up/down/left/right. Spring loaded contact for full 360 degree rotation. Compatible with compact fluorescent, LED, halogen and incandescent floodlights. Controls one ceiling paddle fan. Fan capacity 1.5 amp maximum. Quiet, will not cause fan motor hum. High/Medium/Low/Off. Wallplate not included. 120 volt, 60 Hz. UL Listed.
Heathco HZ-5411-GR Security Floodlight Heathco HZ-5411-WH Security Floodlight LAMP LED LUX WIRELESS
Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. LED compatible. UL Listed. Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. LED compatible. UL Listed. Touch top operation. 100 lumens, 3 AA batteries (not included). Operates on a touch-activated, three-stage dimmer for varying levels of brightness.
Heathco HZ-5407-BZ Motion Detector Heathco HZ-5407-WH Motion Detector Yellow Jacket 2883 SJTW Extension Cord With Powerlite Indicator Plug
Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent. Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent. Extra heavy, clear molded plugs are rugged, durable and oversized. Super flexible and abrasion resistant at any temperature. Made to meet OSHA specifications and UL Listed. 'PowerLite' indicator plug glows when the cord has power. 125 volts. Yellow. Sleeved.
Woods 0723 SJTW Outdoor Extension Cord Westek OMLC7BC Dual Function Programmable Motion Activated Light Control Powerzone ORK506730 SJTW Extension Cord
Made of stranded and cabled copper conductors and solid molded plugs for longer life. Orange outer jacket won't mark floors or walls. Resists deterioration from moisture and abrasion and has a 300 volt rating. UL Listed. Sleeved. Westek Motion Activated Light Control, Dual Function, Programmable, Suitable For Use With: CFL, Halogen and Incandescent Floodlights, 150 W, 180 deg Detection Zone, White, For Outdoor Security - Driveways, Yards and Alleyways Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved.
LIGHT ACCENT LANDSCAPE LED400L FLUSH MOUNT LED 800LM 7IN     Woods 0592 Flat SPT-2 Extension Cord
FLUSH MOUNT LED 800LM 7IN
Our Price: $25.05
Accent landscape lighting Flush mounted LED 800 lumen 7-Inch surface light. Selectable 3000, 4000 or 5000K. Matte white flange. Low profile luminaire. 11.2W, 120V 60 Hz. 50,000 hours. Dimmable to 5 percent. UL Certified. Damp Location Listed for walls. Wet Location Listed for showers and outdoor protected ceilings. Energy Star. Solid molded plugs and stranded all-copper conductors. Made with tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. 13 amp/125 volt. Sleeved.
Powerzone OR500825 SJTW Extension Cord Signal Spot-Gro SJTW-A Single Outlet Extension Cord With Indicator Light Woods 0834 Flat SPT-3 Extension Cord
Rated for 300 volt, grounded. Manufactured with copper conductors and solid molded plugs and two layers of insulation, one around each conductor and a second outer jacket that won't mark floors or walls and resists deterioration from moisture and abrasion. UL, cULus  Listed, meets OSHA specifications. Sleeved. Designed for hard usage. Large cap and connector, thick flexible vinyl jacket, three conductor, lighted end to show when power is on. Store indoors when not in use. 15 amp/125 volt/1875 watts. Yellow. Sleeved. UL Listed, meets OSHA specifications. Designed for general purpose indoor use. Features solid molded plugs and stranded all-copper conductors. Made of tough vinyl insulation that won't mark walls or floors and resists deterioration from moisture and abrasion. Yellow, sleeved. Rental.
LIGHT CEILING LED 750 LUMEN   SENSOR OCCUPANCY              Cooper OS306U-V-K Standard Occupancy/Vacancy Sensor Switch
SENSOR OCCUPANCY
Our Price: $26.89
Ceiling light fixture, dimmable, LED, white, installs through use of direct wire. Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP. Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP.
Cooper OS306U-W-K Standard Occupancy/Vacancy Sensor Switch CCI 2627 SJTW Extension Cord FIXT FLUSH MOUNT LED INT GLOBE
Replaces a standard light or fan switch. Works with Incandescent, Halogen, Fluorescent, LED, CFL, MLV and ELV lights. Status LED indicator. Sensors provide up to 180 degree field of view and 450 square feet of major motion coverage. Selectable time delay of 5 seconds to 30 minutes for lights to remain on after room is vacated. No neutral required for installation. Can be wired as a single-pole or 3-way. Electrostatic discharge protection. Suitable for multi-gang installations. Compatible with decorator-style wallplates and designer screwless wallplates. 120 volts AC, 60Hz, 1/6 HP. Designed for use in extreme cold weather environments. Cord will stay flexible down to -58 degrees Fahrenheit. Manufactured with Powerlite plug, female end lights when power is on. UL Listed, meets OSHA specifications. Blue. Sleeved. Indoor flush mount ceiling fixture, white finish, white opal hand blown glass globe. 7-1/4" x 5-13/16". Traditional design. Dimmable when used with a compatible dimming switch. 620 lumens. 8 watts, equivalent to one 60-watt incandescent bulb. 50,000 average rated hours. ETL/CETL listed, ENERGY STAR qualified.
Lutron Electronics S2-LFSQH-WH Skylark Fan/Light Controls Carlon MCL150C Ceiling Fixture Heathco HZ-5316-WH Heath/Zenith / Dualbrite Motion Detector
Dual dimmer and fan controls. For use with one ceiling paddle fan with full range light dimmer. Rated for 1.5 amp fan and up to 300 watt incandescent/halogen light. 120 volt, 60 Hz. UL Listed. Fixture is manufactured from heavy duty die-cast aluminum, which is suitable for wet locations. Fixture can be surface mounted or mounted to a junction box and is listed for through branch wiring. Use a maximum lamp size of 150 watts, 120 volt AC, incandescent bulb only.