Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > WIRENUTS / CONNECTORS
Sort By:
1
WireGard 19-AWC Assortment Wire Connector Kit WireGard 19-001 Twist-On Wire Connector WireGard 19-002 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-003 Twist-On Wire Connector WireGard 19-004 Twist-On Wire Connector WireGard 19-006 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WingGard 19-084 Twist-On Wire Connector WingGard 19-086 Twist-On Wire Connector Hex-Lok 19-2H2 Hex Lock Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
WingGard 19-089 Twist-On Wire Connector GreenGard 19-095 Grounding Wire Connector Erico ESB6 Blackburn Split Bolt Connectors
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. Silicon bronze for copper to copper. UL Listed.
Erico ESBP8 Split Bolt Connector Spacer Calterm 61470 Assortment Wire Cap Set WireGard 25-002 Twist-On Wire Connector
With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Suitable for solid or stranded copper wire. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 25-001 Twist-On Wire Connector Erico ESBP6 Split Bolt Connectors Hex-Lok 19-1H1 Hex Lock Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs.
WireGard 25-003 Twist-On Wire Connector Gardner Bender 20-089 Closed End Crimp Pigtail Connector Gardner Bender 20-090 Closed End Crimp Pigtail Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed.
PushGard 19-PC2 2-Port Push-In Connector PushGard 19-PC3 3-Port Push-In Connector WingGard 25-084 Twist-On Wire Connector
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
PushGard 19-PC4 4-Port Push-In Connector WireGard 25-004 Twist-On Wire Connector Gardner Bender TK-32 Assortment Wire Connector Kit
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Slide card kit with 32 assorted wire connectors: 10 GB #1 - minimum 3 #22 maximum 2 #16, 8 GB #2 - minimum 3 #22 maximum 3 #18 w/2 #20 6 GB #3 - minimum 3 #20 maximum 2 #14, 2 GB #4 - minimum 1 #14 maximum 4 #12, 4 crimp connector #1035 - 1 #20 w/1 #12 - 2 #14, 2 crimp connector #1034 - 4 #22 - 2 #16.
Ox-Gard OX-100B Anti-Oxidant Compound Erico ESB4 Blackburn Split Bolt Connectors WingGard 25-086 Twist-On Wire Connector
For applications to all aluminum wire leads to prevent oxidation and shorting. Also prevents corrosion of aluminum conduit joints. Squeeze tube. Silicon bronze for copper to copper. UL Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Gardner Bender 10-100 Tap Splice DryConn 20101 Low Voltage Wire Connector DryConn 62210 Safety Sealed Waterproof Wire Connector
For snap-in splicing of low-voltage AWG wire without prior stripping. 75 degree Celsius temperature rating. Clamshell. Suitable for all low voltage applications. For use in lighting, irrigation, and underground wiring. No junction box required. Filled with petroleum based sealant. 30 volt/10 amps maximum. 13/16" x 19/16". Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed.
DryConn 62110 Safety Sealed Waterproof Wire Connector DryConn 62310 Safety Sealed Waterproof Wire Connector Mintcraft CP-323L Wire Cap Set
Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed. Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed. Thirty two piece, for AWG #24 to AWG #10 solid or standard copper wire. Contains: 10 pc wire joint 22-16  300 volt, 2/#22 - 2/#16. 8 piece wire joint 22-14 300 volt 3/#22 - 3/#16. 6 pc wire joint 22-14 600 volt 2/#18 - 4/#16. 2 piece wire joint 18-12 600 volt 1/#18 + #14 - 1 and 2/#14 + 3/#16. 4 piece closed end pigtail 16-14 2/#22 - 2/#14. 2 piece closed end pigtail 12-10 2/#18 - 2/#10.
DryConn 10600 Twist-On Underground Wire Connector WireGard 25-AWC Assortment Wire Connector Kit WireGard 25-006 Twist-On Wire Connector
Rated for all underground direct bury applications. Use on all lighting, irrigation, and underground wiring. Additional sealant for long term service. No junction box needed. 600 volt maximum with building wire, 1000 volt in fixtures and signs. #8 to #22 wire range. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Erico ESBP2 Split Bolt Connectors PushGard 19-PC8 8-Port Push-In Connector Erico ESBP1/0 Split Bolt Connectors
With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper.
WireGard 10-001 Twist-On Wire Connector Erico ESB2/0 Blackburn Split Bolt Connectors GreenGard 25-095 Grounding Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Silicon bronze for copper to copper. UL Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections.
WireGard 10-002 Twist-On Wire Connector Hex-Lok 25-2H2 Hex Lock Wire Connector Hex-Lok 25-1H1 Hex Lock Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs.
Erico ESB1/0 Split Bolt Connector CONNECTOR WIRE ASSORTMNT 158PC 3M DBO/B-6 Underground Splice Kit
Silicon bronze for copper to copper. UL Listed. Cone shaped springs pull wire into the connectors for a firm & secure grip. Pretwisting wires is not required. Maximum rated voltage: Grey, blue, & orange: 300 Volts; Yellow & red: 600 Volts. Neatly organized PVC storage case. Designed to connect and moisture seal electrical connection for direct bury applications, 18-10 AWG, rated up to 600 volts. Combines the quick, reliable connection of a spring connector O/B with the moisture resistance of a high-impact, UV-resistant tube prefilled with moisture-resistant grease. For use with irrigation systems on golf courses, around business and for outdoor lighting systems. Application temperature range 32 - 120 degrees Fahrenheit. EU RoHS Compliant. Flame retardant. UL listed for direct bury.
WingGard 25-089 Twist-On Wire Connector WingGard 17-084 Twist-On Wire Connector Erico ESB4/0 Blackburn Split Bolt Connectors
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Silicon bronze for copper to copper. UL Listed.
WireGard 10-003 Twist-On Wire Connector WingGard 17-086 Twist-On Wire Connector GB-Gardner Bender GSBC-8 Split Bolt Connectors
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. For use with copper to copper conductors only. 600 volt copper only.
Ox-Gard OX-400N Anti-Oxidant Compound Erico ESBP2/0 Split Bolt Connectors CONNECTOR ELEC ASSORTMNT 308PC
For applications to all aluminum wire leads to prevent oxidation and shorting. Also prevents corrosion of aluminum conduit joints. Squeeze tube. With spacer bar silicon bronze, electro-tin plated. For aluminum to aluminum, copper to aluminum, copper to copper. Range for equal main and tap 1/16 copper. Tin plated copper constructed terminals & connectors provide a secure connection between two wires without soldering. Nylon cable clamps can be used for securing & organizing cables, wires, tubings, & rods. UL Listed 100% polyolefin constructed heat-shrink tubings provide an insulated and flame retardant covering for wrapping wire harnesses.
WireGard 16-003 Twist-On Wire Connector WingGard 10-084 Twist-On Wire Connector Coleman 97172 Low Voltage Replacement Spot Light
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. With adjustable direction. Can be mounted to deck or in ground. Durable plastic construction with plastic lens. Uses number 95503 4 watt wedge base bulb, included.
Coleman 97171 Low Voltage Replacement Tier Light WireGard 10-004 Twist-On Wire Connector GB-Gardner Bender GSBC-6 Split Bolt Connectors
Add on to existing low voltage lighting fixtures for illuminating paths, walkways, driveways, or for general lighting needs. Traditional tier light design. Impact resistant polymer construction. Includes surface mount bracket for deck mounting and 4 watt T3 bulb. 9" fixture height. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. For use with copper to copper conductors only. 600 volt copper only.
Gardner Bender 10-411 Crimp Sleeve Connector WireGard 16-002 Twist-On Wire Connector Osram Sylvania 21656 Fluorescent Lamp
Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Averages 7,500 life hours. 70 CRI, 3000K color temperature 18" length.
GB-Gardner Bender GAK-2 Split Bolt Connectors WingGard 16-084 Twist-On Wire Connector Gardner Bender 10-410 Crimp Sleeve Connector
Constructed of high-strength aluminum with oxide-displacing jaws to prevent galvanic corrosion. UL Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed.
Gardner Bender 10-410C Crimp Sleeve Connector Hex-Lok 10-2H2 Hex Lock Wire Connector WireGard 10-006 Twist-On Wire Connector
Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
PushGard 10-PC3 3-Port Push-In Connector WingGard 10-086 Twist-On Wire Connector Coleman Cable 95732 Moonrays Landscape Low Volt Lights
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included.
GB-Gardner Bender GSBC-1/0 Split Bolt Connectors Gardner Bender GSPA-2 Dual Splicer/Reducer Coleman Cable 95734 Moonrays Landscape Low Volt Lights
For use with copper to copper conductors only. 600 volt copper only. For use with both aluminum and copper conductors. Rated for 600 volt AL or CU. Conductor range: GSPA-2 is 2-14. GSPA-O is 1/0-14. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included.
PushGard 10-PC4 4-Port Push-In Connector Hex-Lok 10-1H1 Hex Lock Wire Connector Gardner Bender 10-310C Crimp Sleeve Connector
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed.
WingGard 10-089 Twist-On Wire Connector SPOT LIGHT QUICK-CONNECT 100L WireGard 16-006 Twist-On Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
CONNECTOR TWST WING 160JAR R/Y GreenGard 10-095 Grounding Wire Connector Coleman Cable 95728 Moonrays Landscape Low Volt Lights
The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 degrees Celsius/221 degrees Fahrenheit. Rated at 600V max in building wire and at 1000V max in lighting, fixtures/luminaries and signs. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force. Copper to copper connections only. 80 each number 86 red and number 84 yellow; 160/jar. cULus Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. Adjustable direction. Diecast aluminum with glass lens. Uses number 95499, 20 watt bi-pin Halogen bulb, included.
GB-Gardner Bender GSBC-2/0 Split Bolt Connectors Gardner Bender GSBC-4 Split Bolt Connector WingGard 16-086 Twist-On Wire Connector
For use with copper to copper conductors only. 600 volt copper only. For use with copper to copper conductors only. 600 volt copper only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
DryConn 10222 Low Voltage Dry Connector GB-Gardner Bender GSBC-3/0 Split Bolt Connectors Erico ESBP350 Split Bolt Connectors
For connections exposed to condensation, water, vapors or dust. "One-step" Installation. Corrosion proof. Reduces risk of fire. UL listed and CSA certified as a pressure type connector. 600 maximum voltage with building wire, 1000 volt in fixtures and signs. Minimum #22/Maximum #12 wire range. 17/32" x 15/16". For use with copper to copper conductors only. 600 volt copper only. For use on copper, aluminum and ACSR conductors, the copper alloy bolt and pressure bar are completely tin plated.  Tin plating with a  spacer allows connection of  copper to copper, copper to aluminum, and aluminum to aluminum.  For 3/0 stranded-350 kcmil stranded.
DryConn 10666 Twist-On Underground Wire Connector WireGard 16-004 Twist-On Wire Connector Performance Plus O/B Twist-On Wire Connector
Rated for all underground direct bury applications. Use on all lighting, irrigation, and underground wiring. Additional sealant for long term service. No junction box needed. 600 volt maximum with building wire, 1000 volt in fixtures and signs. #8 to #22 wire range. UL Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Designed for maintenance and repair. Replaces yellow, orange, blue and grey spring connectors. Very small shell with an increased wire range, fits easily into tight spaces. Flexible skirt helps protect workers from contact with overstripped wires. 600 volt maximum rating. 105 degrees C insulation rating. UL Listed and CSA certified.
Coleman Cable 95836 Moonrays Landscape Low Volt Lights Coleman 95878 Low Voltage 3-Tier Holton Path Light SPOT LIGHT QUICK-CONNECT 200L
Diecast aluminum with clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses a 10 watt Halogen bulb, included. Stamped aluminum with nickel finish and ribbed plastic lens. Uses 11 watt number 95527 clear wedge base bulb, included. 9" above ground height. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord
Gardner Bender HST-1300 Splice Kit Coleman Cable 95804 Moonrays - Galena Landscape Low Volt Lights Westinghouse 7028500 Pendant Light Kit
For UF cables minimum #14/3, 12/2 maximum #8/3. Kit includes set screw splice connector and one 8" x 1.3" diameter heavy wall polyolefin heat shrink tubing. Diecast aluminum fixture with rubbed bronze finish and frosted plastic lens Mix-N-Match with other low voltage lights for a custom landscape design. 16.5" above ground height. Uses 11 watt number 95527 wedge base bulb, included. Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included).
Westinghouse 7028400 Pendant Light Kit Westinghouse 7028700 Pendant Light Kit Westinghouse 7028600 Pendant Light Kit
Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included). Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included). Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included).
PATHWAY LT MUSHRM QK-CONN 35L CONNECTOR WIRE WNG NUM22-8 TAN Howard HL0202-BATT Lead Acid Replacement Rechargeable Battery
Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Multi-range hex-head winged twist-on connector. Minimum 3 num22, maximum 3 num10. Hex-head design strips out at UL torque saving the wires. Zinc-plated square wire spring ensures a secure connection that resists corrosion. Automatic or manual installation without stress distortion. 5/16" or 7/16" hex driver installation option. Rated at 600V max in building wire and at 1000V max in lighting, fixtures/luminaries and signs. Copper to copper connections only. cULus Listed. Replacement battery for exit signs, 6 volt.
Coleman 95828 Low Voltage Rock Spotlight LAMP FLUORESCENT 18IN 15W     Gardner Bender GSBC-2 Split Bolt Connector
Decorative rock blends in with landscaping. Made from durable polysresin with glass lens. Uses 20 watt MR-16 number 95518 bulb, included. 5" tall above ground height. Fluorescent T8 with G13 medium bi-pin base. 4100K. Troffer, track and recessed lighting. For use with copper to copper conductors only. 600 volt copper only.
PATHWAY LT BOLLARD QK-CONN 35L PATHWAY LT MUSHRM QK-CONN 35L Performance Plus T/R+ Twist-On Wire Connector
Bollard Quick-Connect Pathway Light.  Plastic housing. 35 Lumens. 0.5 Watts.18/2 SPT-2W, 8 Ft. Cord. Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Smooth, comfortable feel, with a quick bite active (live) spring. Corrosion resistant coating design, compact size and red miniskirt. Wire range of  2 number 18 and up to 5 number 12. Replaces the yellow, tan or red connectors in the majority of all field applications. Copper conductors only, No. 22 thru No. 8 solid and/or stranded. Wing design for a better grip. Voltage rated 600 volt maximum building wire and 1000 volt maximum signs and lighting fixtures. Maximum operating temperature of 221 degrees F. Can be installed with 3M WCD-P wire connector drivers. UL Listed and CSA Certified as a pressure wire connector. Tan with red skirt.
Coleman Cable 95725 Moonrays Landscape Low Volt Lights Performance Plus R/Y+ Twist-On Wire Connector 3M 312 Twist-On Electrical Spring Connector
PAGODA style diecast aluminum fixture with black finish and clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses replacement 11 watt number 95527 wedge base bulb, included. Replaces both red and yellow wing style connectors. Red with yellow skirt. Maximum operating temperature is 221 degrees Fahrenheit. 600 volt maximum. 22 AWG minimum wire gauge, 8 AWG maximum wire gauge. Agency Approvals: UL, CE, IEC, and CSA. Nylon insulated, color-coded spring connectors. Features a live spring for a tight grip. Has wings on bottom for easy torquing.
PENDANT MINI BLK/BLK GLS 1LT  PENDANT MINI BN W/CLR GLS 1LT PENDANT MINI BN/MTL SHADE 1LT
One-light adjustable mini pendant, black finish with hand blown black glass shade. 60-1/2" X 5". Contemporary design. 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed. One-light indoor mini pendant classic retro design, brushed nickel finish with hand blown clear seeded glass shade. 60" X 7". Installation instructions and mounting hardware included. 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed. One-light adjustable mini pendant, brushed nickel finish with elongated metal shade with perforated pattern. Contemporary design. 60" X 5". 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed.
Howard HL0301 Slimline Exit Sign 3M 512 Twist-On Electrical Spring Connector PENDANT ORB W/MTLLC BZ INT 1LT
Slimline, ultra compact, low profile. Charge rate/power on LED indicator light and push-to test switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge. Long life, maintenance free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90 minute emergency illumination. Fully automatic, solid state, two rate charger initiates battery charging to recharge battery in 24 hours. Universal surface mount, wall or ceiling, with EZ-snap thermoplastic mounting canopy. Ultra-bright, energy efficient, long-lasting red LED. Injection-molded, engineering-grade, V-0 flame retardant, high-impact, thermoplastic. Curved face, rounded corner design. 11-5/8" long x 7-3/16" high. Nylon insulated, color-coded spring connectors. Features a live spring for a tight grip. Has wings on bottom for easy torquing. One-light indoor pendant, oil rubbed bronze finish, metallic bronze interior with highlights and metal shade. Vintage industrial design. 57-1/8" x 12", braided cord is 50" long. Uses one 60-watt medium-base light bulb (not included). Includes installation instructions and mounting hardware, can be installed on sloped ceilings. ETL/CETL listed.
LIGHT PENDENT 1LT AMBER/ORB   LIGHT PENDENT 1LT ALABASTER/BN Osram Sylvania 21619 Fluorescent Lamp
Uses 100W maximum type A19 bulb or 23W CFL bulb, (not included). 15-1/2" W x 9-5/8" H. Uses 100W maximum type A19 bulb or 23W CFL bulb, (not included). 15-1/2" W x 9-5/8" H. Used on Bi-Pin fixtures.
Howard HL0202 Adjustable Optics Emergency Light EMERG LIGHT DUAL HEAD NICAD   Boston Harbor V83NK01-VB Pendant Light Fixture
Fully adjustable, offers quick installation and provides premium options in an economical package. Injection-molded, high-impact, UV-stabilized thermoplastic construction. Universal mounting plate with quick-connect feature. Snap-together construction. Fully-adjustable glare-free lighting heads. Dual-voltage 120/277 VAC operation. Long-life, maintenance-free, rechargeable NiCd battery. Supplied with 1.8W LED lamps. Damp location listed. LED emergency light with 3.6 volt nickel cadmium battery back-up and AccuLED optics. Dual voltage input 120/277 VAC, 60Hz - 240 VAC capable with 48 hour recharge time. Brownout circuit, Low voltage disconnect, overload / short circuit protection. Injection molded, color stable, high impact polycarbonate. White textured finish. EZ hang feature for fast installation. Suitable for ceiling or wall mount applications. Universal J-box mounting pattern, keyhole mounting slots. UL924 Listed, damp location. Life Safety NFPA 101, NEC/OSHA. Use clear medium base bulb, 60 watt maximum (not included). 4-7/8" width x 45-3/4" height.
Howard HL0223 Fixed Optics Emergency Light Boston Harbor F3-1MP Pendant Light Fixture PENDNT MATT BLK W/CAGE SHD 1LT
Compact, low-profile design with adjustable optics. Universal mounting plate with quick-connect feature. Snap-together construction speeds installation. Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant thermoplastic with high performance, chrome plated metalized reflector and plastic lens for optimal light distribution. Long-life, ultra bright white LED lamp heads, 1 watt (8 LEDs x 0.125 watt) per head. Dual-voltage 120/277 VAC operation. 3.6 volt, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours. UL Listed for damp locations. White glass shade. Uses one medium base E26 bulb, 60 watt maximum, (not included). 44-1/2" height x 7-1/2" width. cULus Listed. One-light pendant, matte black finish with double layered matte black mesh-like cage shade. Vintage industrial design. Braided cord. 61-7/16" x 10-1/4", includes installation instructions and mounting hardware. Uses one 60-watt medium-base light bulb (not included). ETL/CETL listed.
Howard HL0201 Exit Sign NIGHTLGHT LED PLUG-IN AUTO WHT Boston Harbor V83NK01 Pendant Light Fixture
Slim profile, long life, energy saving LED lamp. Snap-fit canopy for top or end mounting, faceplate installs without tools. Dual voltage 120/277 VAC operation. Directs light downward. LED bulb lasts for years. Automatic on/off feature, turns on when it is dark, off when light. 120 volt, 60Hz. 2.25" height x 3.375" width x 2" depth. UL listed. Use clear medium base bulb, 60 watt maximum (not included). 4-7/8" width x 45-3/4" height.
Coleman Cable 95534 Moonrays Landscape Low Volt Lights SPOT LT LANDSCAPE LED KT 25FT PENDANT MINI HAMMERED BNKL 1LT
Adds safety and security. Patented "Twist-n-Lock" connectors. Frosted white plastic lens. Photocell technology automatically turns lights on at dusk and off at dawn. Includes 10 plastic tier lights, 50' of low voltage cable, 48 watt photocell operated transformer, and 4 watt T3 bulbs. Landscape Spotlight Kit. LED. Dusk Til Dawn, 25 Ft. Plastic housing. 3-Spotlights. Dusk to Dawn Transformer, 12 Watt . Two (2) End Caps. Link Up to 8 Spotlights. 100 Lumens (Per Spotlight). 1.5 Watts (Per Spotlight). 25 - Ft. Cord. Hammered brushed nickel finish. Industrial design. 41-3/8" x 7-3/4", includes installation instructions and mounting hardware. Uses one 60-watt medium-base light bulb (not included). ETL/CETL listed. Adjust the height of the pendant by assembling with 1, 2 or 3 of the 9-1/2" long rods included.
Sure-Lites LPX Emergency Exit Light Westinghouse 6301300 Pendant Light Fixture Erico ESB8 Split Bolt Connector
Thermoplastic housing. 120 or 277 volt AC. 1.5 volt battery backup, LED light uses only 2 watts of energy. Red lettering. Universal exit light mounts on ceiling, wall or can be flush mounted. Snap in canopy/function box cover for easy and secure installation. Three-light adjustable mini pendant and threaded shade rings. Adjustable length, extends 55 inches, 50-inch maximum cord length. For interior use. Uses three medium-base light bulbs, 60-watt maximum (not included). 64-5/8" x 23-1/2" x 4-1/2". UL listed. Silicon bronze for copper to copper. UL Listed.
PENDANT MINI ORB W/AMB GLS 1LT Boston Harbor A2242-3 Pendant Light Fixture Boston Harbor F3-1PD Pendant Light Fixture
One-light adjustable mini pendant with causal design, oil rubbed bronze finish with oil rubbed bronze and amber glass shade. 58-15/16" x 6-3/4". 50" Maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed. Uses clear medium base bulbs 60 watt maximum (not included). 12" wide x 15-1/2" high. cULus Listed. White glass shade. Uses one medium base E26 bulb, 100 watt maximum, (not included). 13-3/4" height x 16" width. cULus Listed.
Osram Sylvania 23121 Fluorescent Lamp PNDNT MINI W/FRST OPAL GLS 1LT WingGard 13-086 Twist-On Wire Connector
Used on Bi-Pin fixtures. Turn knob, oil rubbed bronze finish and frosted opal schoolhouse glass shade. Industrial design. 60-1/4" x -8-3/4", includes installation instructions and mounting hardware. Uses one 60-watt medium-base light bulb (not included). ETL/CETL listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
PNDT MINI LED WSHD CPPR 1LT   PNDT MINI LED ORB W/HGHLTS 1LT PATHWAY LT MSHRM LED KIT 30FT
Frosted prismatic acrylic lens. Dimmable. Industrial vintage design. Install (1, 2 or 3) 9-1/2 in. rod to customize height, includes installation instructions and mounting hardware. Uses one 9-watt medium-base Omni A19 LED light bulb (included), equivalent to one 60-watt incandescent bulb. ETL/CETL listed. Frosted prismatic acrylic lens. Dimmable. Industrial vintage design. Install (1, 2 or 3) 9-1/2 in. rod to customize height, includes installation instructions and mounting hardware. Uses one 9-watt medium-base Omni A19 LED light bulb (included), equivalent to one 60-watt incandescent bulb. ETL/CETL listed. Mushroom Pathway Light Kit. LED. Light reaches up to a 30ft. in distance. (3) Pathway lights. 12-Watt Dusk to Dawn Transformer. (2) End Caps link up to 24 Pathway lights. 35 Lumens (per spotlight).0.5 Watts (per spotlight). 18/2 spt-2w, 30 Ft. Cord
PENDANT MINI ORB W/CLR GLS 1LT Howard HL02143RW Combination Emergency Exit Light PNDT MINI LED CHM W/BUB GLS
One-light adjustable mini pendant, Oil rubbed bronze finish with handblown clear glass. Industrial design. 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included). UL listed. Long lasting, efficient ultra-bright white LED lamp heads and red LED exit sign illumination. 1 watt (8 LEDs x 0.125 watt) per head. Dual 120V/277 voltage. Charge rate/power ON LED indicator light and push to test switch. 9.6V, long-life, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board and LED lamp heads for minimum 90-minute emergency illumination. High-performance smooth chrome plated metalized reflector and plastic lens for optimal light distribution. Adjustable LED lamp heads. EZ-snap mounting canopy included for top or end mount. Universal K/O on back plate for wall mount. Injection-molded, engineering-grade, 5VA flame retardant housing, high-impact, thermoplastic in white finish. EZ snap-out Chevron directional indicators. UL listed for damp locations. Chrome finish and solid cylinder of bubble glass. Contemporary design. Dimmable when used with a compatible dimming switch. 61-1/16" x 5". Includes installation instructions and mounting hardware. Dimmable integrated 8-watt LED is equivalent to one 40-watt incandescent bulb and lasts 22 years, no bulbs to replace. ETL/CETL listed.
SPOT LT LANDSCAPE LED KIT 25FT PNDT LED CHM 1LT W/PRSM LENS  PENDANT LED BLK W/CHM CAGE
Landscape spotlight kit with timer. LED. Dusk to dawn, 25 ft. Metal housing. 3 Spotlights. 24-Watt Dusk to Dawn Transformer with Time on Options. 2 End caps, Link up to 8 Spotlights. 200 Lumens (per spotlight). 3-Watts (per spotlight) Frosted prismatic acrylic lens. Dimmable. Industrial vintage design. Install (1, 2 or 3) 9-1/2 in. rod to customize height, includes installation instructions and mounting hardware. Uses one 9-watt medium-base Omni A19 LED light bulb (included), equivalent to one 60-watt incandescent bulb. ETL/CETL listed. One-light LED indoor pendant, black finish with removable chrome cage. Adjustable pendant with industrial design. 61-1/2" x 12-1/8", 50" maximum cord length. Dimmable integrated 13-watt LED, 900 lumens, equivalent to one 60W incandescent bulb. ETL/CETL listed.
Boston Harbor 1571-3P Pendant Light Fixture Howard HL02143GW-ESP Combination Emergency Exit Light PATHWAY LT MUSHRM LED KIT 30FT
Frosted glass shade. Uses three medium base E26 bulbs, 60 watt maximum, (not included). 21-1/2" height x 15-3/4" width. cULus Listed. Completely self-contained. Fully automatic operation. Compact, low-profile design in neutral finish. Universal mounting canopy for top installation. Push-to-test switch. 6-volt premium grade, pure lead battery. Solid state charger. Automatic, low-voltage disconnect (LVD). Universal transformer for 120 or 277 VAC operation. Standard with two fully adjustable, glare free lighting heads with 130 volt lamps. Injection-molded, V-O flame retardant, high impact thermoplastic housing. Mushroom Pathway Light Kit. LED. Light reaches up to a 30ft. in distance. (3) Pathway lights. 12-Watt Dusk to Dawn Transformer. (2) End Caps link up to 24 Pathway lights. 35 Lumens (per spotlight).0.5 Watts (per spotlight). 18/2 spt-2w, 30 Ft. Cord
Osram Sylvania 23012 Tamper Resistant Fluorescent Lamp Sure-Lites LPX Emergency Exit Light PATH/SPOT LIGHT KIT D2D 50FT
Used on Bi-Pin fixtures. Injection-molded polycarbonate housing. Lead calcium battery, fully sealed, 8 to 10 year life expectancy. Fully charged in 24 hours. Ceiling, wall or end-mountable. Snap-fit canopy included. Snap-out or snap-in chevron directional indicators. Features line-latching, solid-state voltage limited charger, solid-state switching, brownout circuit, low-voltage disconnect, overload/short-circuit protection, test switch/power indicator light. UL 924 Listed, Life Safety NFPA 101, CSA Certified, NEC/OSHA. Pathway-Spotlight Kit. Light reaches up to a 50ft. in distance. (4) Pathway light. (2) Spotlights.12-Watt Dusk to Dawn Transformer.  Link up to 2 complete kits35 Lumens (per pathway light). 100 Lumens (per spotlight). 0.5 watts (per pathway light). 1.5 watts (per spotlight). 18/2 SPT-2W, 50 ft cord.
PATH/SPOT LT KT D2D W/TMR 50FT PNDT PULLEY ORB W/HGHLGHTS 3LT Osram Sylvania Octron 800 Ecologic 21781 Linear Fluorescent Lamp
Pathway-Spotlight Kit with Timer. LED. (4) Pathway lights. (2) Spotlights. 24-Watt Dusk to Dawn Transformer with Time on Options. (2) End Caps link up 3 complete kits. 35 Lumens(per pathway light). 200 Lumens (per spotlight). 0.5-Watts (per pathway light). 3-Watts (per spotlight). 18/2 SPT-2W, 50 ft cord. Three-light indoor island pulley pendant, oil rubbed bronze finish, metallic bronze interior, with highlights. Vintage industrial design. 31-15/16" x 39-15/16", 12" depth. Includes installation instructions and mounting hardware. Uses three 60-watt medium-base light bulbs (not included). ETL/CETL listed. Averages 30,000 life hours. T8 fluorescent lamp, 85 CRI, 2950 lumens. 48" MOL, 1.098" diameter. Suitable for IS or RS operation.
Osram Sylvania Octron 800 Ecologic 21779 Linear Fluorescent Lamp Osram Sylvania Octron 800 Ecologic Fluorescent Lamp BULB LT 17WT8 24IN 4100K 85CRI
Averages 30,000 life hours. T8 fluorescent lamp, 85 CRI, 2950 lumens. 48" MOL, 1.098" diameter. Suitable for IS or RS operation. Octron fluorescent lamp, 4100K (Cool White) color temperature, rare earth phosphor, 82 CRI, suitable for IS or RS operation. T8 OCTRON, 82 CRI, 30,000 hours average life, medium bi-pin base, instant start, white.
BULB LT 17WT8 24IN 3000K 85CRI BULB LT 17WT8 24IN 6500K 85CRI BULB LT 32WT8 48IN 5000K 90CRI
T8 OCTRON, 82 CRI, 30,000 hours average life, medium bi-pin base, instant start, white. Color rendering index(CRI) 85. Industry standard ANSI C78.81 - 2001. Mean lumens 2850. T8 OCTRON 900, 85 CRI, 5000K, 30,000 hours average life, medium bi-pin base, instant start, white.
Osram Sylvania Octron 800 Ecologic Linear Fluorescent Lamp BULB LIGHT 17W T8 24IN 3K 30PK Octron 800 Xp 22026 Ecologic Extended Performance Fluorescent Lamp
Octron fluorescent lamp, 4100K (Cool White) color temperature, rare earth phosphor, 82 CRI, suitable for IS or RS operation. Suitable for instant start or rapid start operation. 82 CRI. 30,000 average life hours. 24" overall length. Color rendering index(CRI) 85. Industry standard ANSI C78.81 - 2001. Mean lumens 2850.
Osram Sylvania Octron 800 Ecologic Linear Fluorescent Lamp Octron 800 Xp 21720 Ecologic Extended Performance Fluorescent Lamp BULB FLUOR G13 32W 4100K 2600L
Octron fluorescent lamp, 4100K (Cool White) color temperature, rare earth phosphor, 82 CRI, suitable for IS or RS operation. Suitable for IS or RS operation. T8, 6500K daylight color temperature, 85 CRI. Industry standards: ANSI C78.81 - 2001. 48" overall length. Fluorescent T8 with G13 medium bi-pin base. 4100K. Troffer, track and recessed lighting.
BULB LT 25WT8 36IN 4100K 85CRI BULB LT 32WT8 48IN 3000K 85CRI BULB LT 25WT8 36IN 3000K 85CRI
T8 OCTRON, 82 CRI, 30,000 hours average life, medium bi-pin base, instant start, white. T8 OCTRON, 82 CRI, 30,000 hours average life, medium bi-pin base, instant start, white. T8 OCTRON, 82 CRI, 30,000 hours average life, medium bi-pin base, instant start, white.
Osram Sylvania 22136 Fluorescent Lamp Osram Sylvania 23028 Fluorescent Lamp Osram Sylvania 23027  Fluorescent Lamp
Suitable for instant start or rapid start operation. 82 CRI. 30,000 average life hours. 24" overall length. Used on Bi-Pin fixtures. Used on Bi-Pin fixtures.
Erico ESB2 Blackburn Split Bolt Connectors Osram Sylvania Octron 700 Ecologic Linear Fluorescent Lamp Osram Sylvania 22179 Fluorescent Lamp
Silicon bronze for copper to copper. UL Listed. Octron high output fluorescent lamp, 4100K color temperature, rare earth phosphor, 78 CRI, 8000 lumens. Suitable for RS operation. 93.909 MOL.18,000 hours average rated life. Super saver extended performance Ecologic Octron fluorescent light bulb. Averages 36,000 life hours. 2725 initial lumens, T8 fluorescent lamp, 85 CRI, 4100K color temperature.
Octron 800 22173 Ecologic Fluorescent Lamp Octron 800 Xp Xl 22149 Extended Life Ecologic Fluorescent Lamp BULB 86W HO T8 96IN 4100K
Averages 15,000 life hours. 96" MOL,1.10" diameter,  5000K color temperature, rare earth phosphor, 80 CRI, suitable for IS operation. Industry standard ANSI C78.81 - 2001. Single pin base fluorescent lamp, 96" mol, 4100K color temperature, rare earth phosphor, 82 CRI, suitable for IS operation, Ecologic. Octron high output fluorescent lamp, recessed double contact base. 4100K color temperature, rare earth phosphor, 85 CRI, 8200 lumens. 96" nominal length. 18,000 hours average rated life.
   
 
1