Home > ELECTRICAL > ROUGH ELECTRICAL > SURFACE WIRING > WALL CHANNEL- WIREMOLD
Choose a sub category:
STANDARD SWITCH PLATES OVERSIZE SWITCH PLATES STANDARD RECEPTACLE PLATES
OVERSIZE RECEPTACLE PLATES STANDARD BLANK PLATES OVERSIZE BLANK PLATES
STANDARD COMBO PLATES OVERSIZE COMBO PLATES STANDARD GFCI/DECOR PLATES
OVERSIZE GFCI/DECOR PLATES SPECIALTY SWITCH PLATES SPECIALTY RECEPTACLE PLATES
SPECIALTY BLANK PLATES SPECIALTY GFCI-ROCKER PLATES COVER PLATE SCREWS
TV / CABLE PLATES SINGLE OUTLET DECORATIVE SWITCH PLATES
DECORATIVE RECEPTACLE PLATES DECORATIVE GFCI/DECOR PLATES DECORATIVE COMBO PLATES
Sort By:
1
WALLPLATE SWITCH 1G LA        WALLPLATE SWITCH NYLON 1G LA  WALLPLATE BLANK 1G LA
WALLPLATE SWITCH 1G LA
Our Price: $0.33
WALLPLATE BLANK 1G LA
Our Price: $0.62
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75". Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75" Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed.
Arrow Hart PJ8 Mid Size Unbreakable Wall Plate WALLPLATE SWITCH 2G LA        Arrow Hart PJ26 Decorative Mid Size Unbreakable Wall Plate
WALLPLATE SWITCH 2G LA
Our Price: $1.14
Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
Arrow Hart PJ26BK Decorator Screwless Unbreakable Wall Plate Arrow Hart 2137 Blank Standard Wall Plate Arrow Hart 2137 Blank Standard Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875". Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
WALLPLATE BLANK 2G LA         WireGard 19-AWC Assortment Wire Connector Kit WireGard 19-001 Twist-On Wire Connector
WALLPLATE BLANK 2G LA
Our Price: $1.27
Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-002 Twist-On Wire Connector WireGard 19-003 Twist-On Wire Connector WireGard 19-004 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 19-006 Twist-On Wire Connector WingGard 19-084 Twist-On Wire Connector WingGard 19-086 Twist-On Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Hex-Lok 19-2H2 Hex Lock Wire Connector WingGard 19-089 Twist-On Wire Connector GreenGard 19-095 Grounding Wire Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections.
WALLPLATE RCPT LT ALMOND 2G   WALLPLATE DPLX/DECO LT ALM 2G Arrow Hart PJ18V Combination Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ82 Mid Size Unbreakable Wall Plate Arrow Hart PJ82 Mid Size Unbreakable Wall Plate Arrow Hart PJ18W Combination Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ126 Combination Decorative Mid Size Wall Plate Arrow Hart PJ126 Combination Decorative Mid Size Wall Plate Arrow Hart Eagle 2141 Standard Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
Arrow Hart 2141V-BOX Standard Wall Plate Arrow Hart 2141W-BOX Standard Wall Plate WALLPLATE SWITCH 3G LA
WALLPLATE SWITCH 3G LA
Our Price: $1.65
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 6.375", boxed.
CordMate Legrand C Wireway Outside Elbow CordMate Legrand C Wireway Inside Elbow CordMate Legrand C Wireway Flat Elbow
Hides and organizes loose cords and wires. Hides and organizes loose cords and wires. Hides and organizes loose cords and wire.
CordMate Legrand C19 Channel Coupling Bell 5019-0 Replacement Rectangular Multipurpose Gasket Arrow Hart PJ262BK Decorator Wall Plate
Joins channels that hide and organize loose cords and wires. UL Listed. Rectangular replacement gaskets for weatherproof covers and lamp holders. Each gasket has cut outs for a toggle switch, duplex receptacle and 1.406" diameter round receptacle. Remove the cut outs for the duplex and round receptacles for a GFCI receptacle opening. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ263 Decorative Mid Size Unbreakable Wall Plate Arrow Hart PJ262 Decorative Mid Size Unbreakable Wall Plate Arrow Hart PJ262 Decorative Mid Size Unbreakable Wall Plate
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ263 Decorative Mid Size Unbreakable Wall Plate CordMate II Legrand C Wireway Flat Elbow CordMate II Legrand C Wireway Inside Elbow
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Hides and organizes loose cords and wire. For making a 90 degree turn around an inside corner from wall-to-wall or wall-to-ceiling.
CordMate II Legrand C Wireway Outside Elbow CordMate II Legrand C59 Joint Cover Channel Coupling CordMate II Legrand C 3-Way Standard T-Fitting
For making a 90 degree turn around an outside corner. Joins channels that hide and organize loose cords and wires. UL Listed. For installation requiring 3-way branching including 90-degree angle.
WALLPLATE TOGGLE LT ALMOND 4G Calterm 61470 Assortment Wire Cap Set WireGard 25-002 Twist-On Wire Connector
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 8.188", boxed. Suitable for solid or stranded copper wire. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WireGard 25-001 Twist-On Wire Connector Arrow Hart 93151-BOX Blank Standard Wall Plate Hex-Lok 19-1H1 Hex Lock Wire Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Made of Type 302/304 stainless steel for superior non-magnetic corrosion-resistant properties. Horizontally satin-brushed surface finish resists fingerprints. Matching stainless steel mounting screws provided. Plates are 0.032" thick. Meets all UL and CSA requirements. Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs.
Arrow Hart 93071-BOX Blank Standard Wall Plate Arrow Hart Eagle 2154 Standard Wall Plate Arrow Hart Eagle 2154 Standard Wall Plate
Wall plate is made of type 304 stainless steel alloy to be non-magnetic and corrosion resistant. Matching screws are provided.  Brushed satin finish to resist fingerprints. Plates are 0.032" thick. Standard size - 2.75" x 4.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 8.188", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 8.188", boxed.
Arrow Hart Eagle 2154 Standard Wall Plate WireGard 25-003 Twist-On Wire Connector Gardner Bender 20-089 Closed End Crimp Pigtail Connector
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 8.188", boxed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed.
Gardner Bender 20-090 Closed End Crimp Pigtail Connector WALLPLATE 2-TOG/DPLX LT ALM 3G Arrow Hart PJ28 Combination Mid Size Wall Plate
Tin-plated seamless copper closed-end crimp connector for use with solid or stranded wire. Vibration resistant, corrosion and chemical resistant. UL listed. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75".
Legrand NM7 Nonmetallic Raceway Inside Elbow Legrand NM8 Nonmetallic Raceway Outside Elbow Wiremold NM910 Connection Cover
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. For making a 90 degree outside turn around a corner. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover.
CordMate Legrand NM Raceway Wireway Inside Elbow Legrand NMW910 Raceway Accessory Pack CordMate Legrand NM Raceway Wireway Outside Elbow
For making a 90 degree inside turn around a corner from wall-to-wall or wall-to-ceiling. Mounting components for NMI wire channel, including screws and anchors, wire clips and joint cover. For making a 90 degree outside turn around a corner.
Arrow Hart 2134 Standard Wall Plate Arrow Hart 2134W Standard Wall Plate PushGard 19-PC2 2-Port Push-In Connector
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75". Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only.
PushGard 19-PC3 3-Port Push-In Connector WingGard 25-084 Twist-On Wire Connector PushGard 19-PC4 4-Port Push-In Connector
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only.
WireGard 25-004 Twist-On Wire Connector Gardner Bender TK-32 Assortment Wire Connector Kit Arrow Hart Eagle 2155 Standard Wall Plate
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Slide card kit with 32 assorted wire connectors: 10 GB #1 - minimum 3 #22 maximum 2 #16, 8 GB #2 - minimum 3 #22 maximum 3 #18 w/2 #20 6 GB #3 - minimum 3 #20 maximum 2 #14, 2 GB #4 - minimum 1 #14 maximum 4 #12, 4 crimp connector #1035 - 1 #20 w/1 #12 - 2 #14, 2 crimp connector #1034 - 4 #22 - 2 #16. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 10", boxed.
WingGard 25-086 Twist-On Wire Connector Gardner Bender 10-100 Tap Splice Legrand NM11 T-Fitting
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. For snap-in splicing of low-voltage AWG wire without prior stripping. 75 degree Celsius temperature rating. Clamshell. For branching wire channel in two directions at 90 degree angles.
CordMate Legrand NMW11 3-Way T-Fitting Legrand NM6 Nonmetallic Raceway Flat Elbow CordMate Legrand NM Raceway Wireway Flat Elbow
For branching wire channel in two directions at 90 degree angles. For making 90 degree right or left turns on a flat surface. For making 90 degree right or left turns on a flat surface.
DryConn 20101 Low Voltage Wire Connector DryConn 62310 Safety Sealed Waterproof Wire Connector Arrow Hart 93072-BOX Standard Wall Plate
Suitable for all low voltage applications. For use in lighting, irrigation, and underground wiring. No junction box required. Filled with petroleum based sealant. 30 volt/10 amps maximum. 13/16" x 19/16". Suitable for all wire splices, especially those exposed to condensation, water vapors or dust. UL Listed. Wall plate is made of type 304 stainless steel alloy to be non-magnetic and corrosion resistant.  Matching screws are provided. Brushed satin finish to resist fingerprints. Plates are 0.032" thick. Standard size - 4.50" x 4.563", boxed.
Legrand B-8 Metal Raceway Outside Elbow Mintcraft CP-323L Wire Cap Set DryConn 10600 Twist-On Underground Wire Connector
Used to make a 90 degree outside turn around a corner. Thirty two piece, for AWG #24 to AWG #10 solid or standard copper wire. Contains: 10 pc wire joint 22-16  300 volt, 2/#22 - 2/#16. 8 piece wire joint 22-14 300 volt 3/#22 - 3/#16. 6 pc wire joint 22-14 600 volt 2/#18 - 4/#16. 2 piece wire joint 18-12 600 volt 1/#18 + #14 - 1 and 2/#14 + 3/#16. 4 piece closed end pigtail 16-14 2/#22 - 2/#14. 2 piece closed end pigtail 12-10 2/#18 - 2/#10. Rated for all underground direct bury applications. Use on all lighting, irrigation, and underground wiring. Additional sealant for long term service. No junction box needed. 600 volt maximum with building wire, 1000 volt in fixtures and signs. #8 to #22 wire range. UL Listed.
Legrand B-6 Metal Raceway Flat Elbow Legrand B-7 Metal Raceway Inside Elbow WireGard 25-AWC Assortment Wire Connector Kit
Used to make a 90 degree right or left turn on a flat surface. Used to make a 90 degree inside turn around a corner, from wall-to-wall or wall-to-ceiling. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
WALLPLATE 2-TOG/DECO LT ALM 3G WireGard 25-006 Twist-On Wire Connector Arrow Hart PJ226 Combination Decorative Mid Size Wall Plate
Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75". Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75".
Arrow Hart PJ226 Combination Decorative Mid Size Wall Plate PushGard 19-PC8 8-Port Push-In Connector Arrow Hart PJ264 Decorative Mid Size Unbreakable Wall Plate
Virtually unbreakable polycarbonate construction, high structural rigidity, long-term form retention. 0.375" longer and wider on all sides than standard to cover large wallboard openings, assures NEC-required gap  coverage for most wallboard-to-box openings. Screw-catch feature holds color-matched plate mounting screws captive for ease of installation. Superior abrasion and impact resistance. Temperature rating of -40 to 65 degrees C. Meets flammability requirements per UL 94, V2 rated. UL 514D and cUL Listed. Meets all CSA requirements. Mid-size - 4.875" x 6.75". Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 8.563".
CordMate Legrand C10 Wire Channel WireGard 10-001 Twist-On Wire Connector Arrow Hart PJ8-CP Unbreakable Wall Plate
Hides and organizes low voltage loose cords and wires. UL Listed. 1/2" height x 3/8" width x 5' length. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 3.125" x 4.875".
GreenGard 25-095 Grounding Wire Connector WireGard 10-002 Twist-On Wire Connector Hex-Lok 25-2H2 Hex Lock Wire Connector
Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Hex-Lok 25-1H1 Hex Lock Wire Connector CONNECTOR WIRE ASSORTMNT 158PC Arrow Hart 5134W Standard Wall Plate
Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. Cone shaped springs pull wire into the connectors for a firm & secure grip. Pretwisting wires is not required. Maximum rated voltage: Grey, blue, & orange: 300 Volts; Yellow & red: 600 Volts. Neatly organized PVC storage case. Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75"
Arrow Hart 5134V Standard Wall Plate Legrand NMW17 Raceway Conduit Connector Wiremold Raceway On-Wall Mount Conduit Connector
Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75" For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires. For transitioning from nonmetallic raceway to conduit. Hides and organizes loose cords and wires.
3M DBO/B-6 Underground Splice Kit Ecobulb BPESL13T/GU24 CFL WingGard 25-089 Twist-On Wire Connector
Designed to connect and moisture seal electrical connection for direct bury applications, 18-10 AWG, rated up to 600 volts. Combines the quick, reliable connection of a spring connector O/B with the moisture resistance of a high-impact, UV-resistant tube prefilled with moisture-resistant grease. For use with irrigation systems on golf courses, around business and for outdoor lighting systems. Application temperature range 32 - 120 degrees Fahrenheit. EU RoHS Compliant. Flame retardant. UL listed for direct bury. Saves energy costs by replacing incandescent bulbs with fluorescent. Standardized GU24 socket eliminates pin confusion when replacing lamps or switching to a lamp/ballast with higher or lower lumens. Ballast and lamp are integral, so the overall length is shorter, allowing better fit in some applications. 10,000 average life hours. RoHS Compliant, non-dimmable. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Osram Sylvania 20415 Fluorescent Lamp WingGard 17-084 Twist-On Wire Connector WireGard 10-003 Twist-On Wire Connector
Used on Bi-Pin fixtures. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Legrand B-1 Wire Channel Feit BPESL13TGU24D Non-Dimmable CFL Legrand NM Outlet Box
Metal surface mount, for wall or ceiling use. 5' length x 3/4" height x 17/32" width. Use to protect cords. Saves energy costs by replacing incandescent bulbs with fluorescent. Standardized GU24 socket eliminates pin confusion when replacing lamps or switching to a lamp/ballast with higher or lower lumens. Ballast and lamp are integral, so the overall length is shorter, allowing better fit in some applications. 10,000 average life hours. RoHS Compliant, non-dimmable. Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep.
Wiremold NMW2 Starter Box Wiremold B81 Metal Raceway Box Connector Arrow Hart 5134 Standard Wall Plate
Fits over existing single gang outlet to feed power as the starting point for your system. 1" deep. For connecting raceway to conduit boxes with 1/2" knockout. Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75"
Arrow Hart BP5134V Standard Wall Plate Legrand B-16 T-Fitting Legrand CordMate II C53 Datacom Box
Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75" Hides and organizes loose cords and wires. For mounting phone, fax, cable and audio connections (not for power). Paintable with a latex base paint. Simple to use, just peel off self-adhesive backing.
Legrand NM Deep Outlet Box Wiremold NMW3 Outlet Box WingGard 17-086 Twist-On Wire Connector
For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth. For installing dimmer switches as well as standard size switches and outlets. 1-7/16" length x 1-3/8" depth. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
Legrand NMW Extra Deep Outlet Box Legrand NM Extra Deep Outlet Box CONNECTOR ELEC ASSORTMNT 308PC
For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1-3/4" deep. Tin plated copper constructed terminals & connectors provide a secure connection between two wires without soldering. Nylon cable clamps can be used for securing & organizing cables, wires, tubings, & rods. UL Listed 100% polyolefin constructed heat-shrink tubings provide an insulated and flame retardant covering for wrapping wire harnesses.
WireGard 16-003 Twist-On Wire Connector Legrand B5 Starter Box Wiremold B-17 Raceway Combination Connector
Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. For installing speed controls for ceiling fans dimmer switches, standard switches and outlets. 1" deep. Metal raceway. For transitioning from metal raceway to 1/2" conduit or from any steel box with 1/2" knockout.
Wiremold B-9-10-11 Wire Channel Accessories WingGard 10-084 Twist-On Wire Connector Legrand NMW2S Switch Kit
Use to provide easy access to connections. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. For most residential wiring.
Wiremold NMW2D Outlet Box Duplex Switch Osram Sylvania 21551 Decorative Tamper Resistant Fluorescent Lamp WireGard 10-004 Twist-On Wire Connector
For most residential wiring. Designer warm white rare earth phosphor. Color temperature 3000K, 70 CRI, 9,000 average life hours. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Legrand B2 Deep Outlet Box Legrand NMW1 Raceway Wire Channel Feit BPESL18TMGU24 Non-Dimmable CFL
For most residential wiring devices. For installing a shallow switch or outlet. 1" deep. Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height. Saves energy costs by replacing incandescent bulbs with fluorescent. Standardized GU24 socket eliminates pin confusion when replacing lamps or switching to a lamp/ballast with higher or lower lumens. Ballast and lamp are integral, so the overall length is shorter, allowing better fit in some applications. 10,000 average life hours. RoHS Compliant, non-dimmable.
Legrand NM1 Nonmetallic Raceway Wire Channel Arrow Hart 2134B-BOX Standard Wall Plate Arrow Hart 2134V-BOX Standard Wall Plate
Carries wire from starter box to downstream outlet boxes, switches and fixtures. 5' length x 1-5/16" width x 7/16" height. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75".
Arrow Hart 2134W-BOX Standard Wall Plate Legrand B3 Deep Outlet Box Gardner Bender 10-411 Crimp Sleeve Connector
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard plate size: 4.50" x 2.75". For installing a deep-dimensioned box for dimmers, speed control switches and other devices. 1-3/8" deep. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed.
Legrand B2S Switch Kit Wiremold B2D Outlet Box Duplex Switch WireGard 16-002 Twist-On Wire Connector
For most residential wiring. For most residential wiring. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only.
Arrow Hart 5134 Standard Wall Plate Legrand B35 Extra Deep Outlet Box Legrand NM Outlet Box
Molded from non-flammable nylon. Flush-fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 2.75" For oversized wiring devices such as fan speed controls, dimmer switches and GFCIs. 1-3/4" deep. Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4" x 4-7/8 x 1-3/8" deep.
Ecobulb BPESL23TM/GU24 CFL Arrow Hart 2142 Oversize Wall Plate Arrow Hart 2142V-BOX Oversize Wall Plate
Saves energy costs by replacing incandescent bulbs with fluorescent. Standardized GU24 socket eliminates pin confusion when replacing lamps or switching to a lamp/ballast with higher or lower lumens. Ballast and lamp are integral, so the overall length is shorter, allowing better fit in some applications. 10,000 average life hours. RoHS Compliant, non-dimmable. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25".
Arrow Hart 2142W-BOX Oversize Wall Plate CornerMate Legrand C40 Wire Channel Legrand B13-14 Metal Raceway Twist Elbow
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25". Hides home audio/home theater cords that typically run in corners. Easy peel and press installation. Reversible cover for concave or convex profile. Paintable to match wall colors. For making a 90 degree turn around an outside corner while changing channel orientation.
WingGard 16-084 Twist-On Wire Connector Gardner Bender 10-410 Crimp Sleeve Connector Gardner Bender 10-410C Crimp Sleeve Connector
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed.
Hex-Lok 10-2H2 Hex Lock Wire Connector WireGard 10-006 Twist-On Wire Connector Wiremold NMW3-2 Outlet Box
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. Expanded capacity for extra outlets or outlet/switch combinations. 4-3/4" x 4-7/8 x 1-3/8" deep.
PushGard 10-PC3 3-Port Push-In Connector WingGard 10-086 Twist-On Wire Connector Legrand B32 Outlet Box
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Expanded capacity for extra outlets or outlet/switch combinations. 1-3/8" deep.
PushGard 10-PC4 4-Port Push-In Connector Arrow Hart Eagle 2139 Standard Wall Plate Arrow Hart 2139V-BOX Standard Wall Plate
Easy and fast, strip and push conductors into connectors to make reliable, secure connections. Simplified insertion and compact size helps in tight locations. Clear polycarbonate housings have color-coded side panels for connection verification and identification. Corrosion-resistant stainless steel springs restrict wire pullout, yet corrections are possible with a simple left-right twist and pull. Continuity test point for easy voltage checks. Rated at 600 volt maximum in building wire and at 1000 volt maximum in lighting fixtures and luminaries. Copper-to-copper connections only. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
Arrow Hart 2139W-BOX Standard Wall Plate Hex-Lok 10-1H1 Hex Lock Wire Connector Legrand NM Fixture Box
Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563". Multi-range copper to copper connections only. Allows automatic or manual installation without stress whitening or distortion. Use 5/16" socket for H1. Square wire spring grabs and holds wires for secure connections. Long skirt covers stripped wires. Rated at 600 volt maximum and at 1000 volt maximum in lighting fixtures, luminaries and signs. For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. (Not a mounting bracket. Ceiling fans and fixtures over 10 pounds must be mounted independently from circular fixture box.)
Wiremold NMW4 Fixture Box Gardner Bender 10-310C Crimp Sleeve Connector Feit BPESL13T/GU24/2 Non-Dimmable CFL
For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. (Not a mounting bracket. Ceiling fans and fixtures over 10 pounds must be mounted independently from circular fixture box.) Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL Listed. Saves energy costs by replacing incandescent bulbs with fluorescent. Standardized GU24 socket eliminates pin confusion when replacing lamps or switching to a lamp/ballast with higher or lower lumens. Ballast and lamp are integral, so the overall length is shorter, allowing better fit in some applications. 10,000 average life hours. RoHS Compliant, non-dimmable.
Ecobulb PLF65/65 CFL CordMate Legrand C110 Cord Channel Kit Arrow Hart 2137 Blank Standard Wall Plate
Mogul base fluorescent, 65 watt, equivalent to 300 watt incandescent. Four tube lamp, 8.75" overall length. Daylight bulb, 6500K, 4, 550 Lumens. Fits Mogul base fluorescent lights such as Cooper model AL65FL 65W Orgill SKU 084.9711. Kit includes: three 3' sections of channel, 2 couplings, 1 inside elbow, 1 outside elbow and 2 flat elbows. Non-flammable, box mounted, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 4.50" x 4.563".
WingGard 10-089 Twist-On Wire Connector WireGard 16-006 Twist-On Wire Connector CONNECTOR TWST WING 160JAR R/Y
Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed. Tight, square-wire spring threads directly onto conductors for fast connections with no slip. Tightens without ratcheting, easily removed for repeat usage on same size combination or larger. Fluted shell surface permits a firm grip for easy finger-tight connections. Thermoplastic shell shields against environmental extremes. Flame-retardant properties resist heat distortion up to 221 degrees Fahrenheit. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. For copper to copper connections only. The swept wings provide added turning torque and reduce the strain of multiple applications. The thermoplastic shell provides strength and resistance to chemicals while a long skirt prevents exposure of bare wire. Flame-retardant properties resist heat distortion up to 105 degrees Celsius/221 degrees Fahrenheit. Rated at 600V max in building wire and at 1000V max in lighting, fixtures/luminaries and signs. The zinc-plated square wire-spring inside instantly adjusts to the shape and size of the splice upon insertion ensuring a long-lasting connection that resists corrosion and exceeds UL standards for dielectric strength and wire pullout force. Copper to copper connections only. 80 each number 86 red and number 84 yellow; 160/jar. cULus Listed.
Legrand B4F Fixture Box GreenGard 10-095 Grounding Wire Connector CordMate II Legrand C50 Hinged Cord Wire Channel
Legrand B4F Fixture Box
Our Price: $13.90
For bringing power to a light fixture, ceiling fan, smoke detector or other round based fixtures. Specifically designed for making positive ground connections. Connectors feature the same live-action as WingGard connectors with the added plating protection for corrosion resistance in grounding applications. Contoured, offset wings enable firm ground connections with the twist of a hand. Flame retardant, themoplastic shell resists punctures, cuts, abrasion and corrosion. Connectors have a hole in the tip for ground wire. Solid copper to copper connections only. Nos. 15-095; 19-095 and 25-095: minimum 2 #14, maximum 4 #12 wire connections. Hinged, for hiding home office and home entertainment cabling. UL Listed. 5' length x 1" width x 1/2" height.
Arrow Hart 5139W Standard Wall Plate Arrow Hart 5139V Standard Wall Plate WingGard 16-086 Twist-On Wire Connector
Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 4.563". Molded from non-flammable nylon. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Plate size: 4.50" x 4.563". Easy-on, easy-off without tools. Wings are knurled for a surer grip and offset from the centerline for greater twisting leverage. Easily removed for repeat usage on same size combination or larger. Expandable square-wire plated spring instantly adjusts to the shape and size of the splice for a vibration-resistant connection. Tough thermoplastic shell shields against environmental extremes. Flame-retardant, non-porous and non-corrosive shell resists surface cracking and chemical action. Temperature rating: 221 degrees F. Superior flash-over protection. High-dielectric shell features deep skirt design to prevent exposure of bare wire. Buttress threads screw into wire insulation. Copper to copper connections only. cULus Listed.
DryConn 10222 Low Voltage Dry Connector Arrow Hart 2129 Blank Standard Wall Plate Arrow Hart 2129V-BOX Blank Standard Wall Plate
For connections exposed to condensation, water, vapors or dust. "One-step" Installation. Corrosion proof. Reduces risk of fire. UL listed and CSA certified as a pressure type connector. 600 maximum voltage with building wire, 1000 volt in fixtures and signs. Minimum #22/Maximum #12 wire range. 17/32" x 15/16". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed.
Arrow Hart 2129W-BOX Standard Wall Plate Arrow Hart 2751 Decorative Oversize Wall Plate Arrow Hart Eagle 2751 Decorative Oversize Wall Plate
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 5.25" x 3.50", boxed. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Standard size - 5.25" x 3.50", boxed.
DryConn 10666 Twist-On Underground Wire Connector WireGard 16-004 Twist-On Wire Connector Performance Plus O/B Twist-On Wire Connector