Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > METAL CONDUIT ACCESSORIES
Choose a sub category:
RECESSED RETROFIT LED RECESSED RETROFIT LED CEILING LIGHT RETROFIT
CEILING LIGHT RETROFIT
Sort By:
1
Halex 97521 Insulated Conduit Bushing Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 97522 Insulated Conduit Bushing Halex 71210B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 97525 Insulated Conduit Bushing Halex 71212B 2-Hole Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Halex 96191 Rigid IMC Conduit Locknut Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 96071 Knock Out Seals Halex 96821 Rigid Reducing Conduit Washer Halex 96072 Knock Out Seals
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 61220B 2-Hole Conduit Strap Halex 97523 Insulated Conduit Bushing Halex 96111 1-Hole Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 96831 Rigid Reducing Conduit Washer Halex 96832 Rigid Reducing Conduit Washer Halex 96192 Rigid IMC Conduit Locknut
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26190 Conduit Locknut Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 96560 Beam Clamp Halex 71220B 2-Hole Conduit Strap Halex 96121 2-Hole Conduit Strap
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 96151 1-Hole Snap-On Conduit Strap Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96161 2-Hole Snap-On Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 96112 1-Hole Conduit Strap Halex 96780 Conduit Hanger
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 96213 1-Hole Cable Strap WASHER RDUCNG RGD 1-1/4X1/2IN WASHER RDUCNG RGD 1-1/4X3/4IN
Steel, use to secure BX cable to wood, masonry or similar surface. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96194 Rigid IMC Conduit Locknut Halex 96122 2-Hole Conduit Strap Halex 96781 Conduit Hanger
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp WASHER RDUCNG RGD 1-1/2X1/2IN WASHER RDUCING RGD 1-1/2X3/4IN
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96162 2-Hole Snap-On Conduit Strap STRAP CBL 1HOLE SRVC ENT      Halex 96152 1-Hole Snap-On Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Indoor or outdoor applications. To support EMT conduit.
Halex 96195 Rigid Conduit Locknut Halex 26155 1-Hole Snap-On Conduit Strap Halex 26071 Knock Out Seals
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor applications. To support EMT conduit. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 26211 1-Hole Conduit Strap Thomas And Betts Z703 1/2-25 Superstrut Halex 61225 2-Hole Conduit Strap
Steel, use to secure BX cable to wood, masonry or similar surface. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26210 1-Hole Service Entrance Strap Halex 26165 2-Hole Snap-On Conduit Strap Halex 97526 Insulated Conduit Bushing
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 26153 1-Hole Snap-On Conduit Strap Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 3/4-25 Superstrut
Indoor or outdoor applications. To support EMT conduit. For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 26125 2-Hole Conduit Strap Thomas And Betts Z703 1 1/4-10 Superstrut Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Splices and supports conduit.
Halex 26163 2-Hole Snap-On Conduit Strap Halex 26126 2-Hole Conduit Strap Thomas And Betts Z703 1-25
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 96196 Rigid IMC Conduit Locknut Carlon E977LC-CAR Conduit Clamp Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt.
STRAP CBL 1HOLE OVAL SRVC ENT Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26154 1-Hole Snap-On Conduit Strap
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit.
Thomas And Betts Z500-25 Superstrut Beam Clamp Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 1 1/2-10 Superstrut
For hanging rod, silver electroplated finish. For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 75225 Insulated Conduit Bushing Halex 26156 1-Hole Snap-On Conduit Strap Halex 26166 2-Hole Snap-On Conduit Strap
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 01925B IMC Conduit Locknut Gardner Bender GCC-310 2-Hole Conduit Strap Thomas And Betts Z702 3EG-10 Superstrut
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt.
Halex 67860 Conduit Hanger Halex 61230 2-Hole Conduit Strap Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26164 2-Hole Snap-On Conduit Strap Halex 26073 Knock Out Seals Halex 75230 Insulated Conduit Bushing
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Gardner Bender GCC-410 2-Hole Conduit Strap Superstrut 200 Flat Right Angle Bracket Corner Plate Superstrut 200 Series Flat Straight Bracket
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Splices and supports conduit. Splices and supports conduit.
Halex 64405 Conduit Elbow Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Gardner Bender GCC-120 2-Hole Conduit Strap
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap Halex 26074 Knock Out Seals
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp LOCK NUT SEALER 1/2IN         Superstrut ZCM1001/4-10 Cone Nut
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Superstrut Cone Nut, 1/4 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System
Halex 26075 Knock Out Seals WASHER REDUCING 2X1IN         WASHER REDUCING 2X1-1/4IN
WASHER REDUCING 2X1IN
Our Price: $3.60
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Carlon Z703 2 Pipe Clamp Halex 64505 Conduit Elbow Halex 64507 Conduit Elbow
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. To connect EMT conduit together to allow for 45 degree bends. To connect EMT conduit together to allow for 45 degree bends.
Gardner Bender GCC-610 2-Hole Conduit Strap Halex 26141 Flat Drive Strap Halex 26151 1-Hole Snap-On Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Indoor or outdoor applications. To support EMT conduit.
Halex 61130 1-Hole Conduit Strap Halex 26152 1-Hole Snap-On Conduit Strap Thomas And Betts ZA1001/4EG-10 Superstrut
Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed. Indoor or outdoor applications. To support EMT conduit. For use with 'A' and 'C' series channel and inserts.
Thomas And Betts Z502-10 Superstrut Beam Clamp Halex 61820B IMC Sealer Locknut Halex 26161 2-Hole Snap-On Conduit Strap
For hanging rod, silver electroplated finish. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 64407 Conduit Elbow Thomas And Betts ZA1003/8EG-10 Superstrut Thomas And Betts ZU501-10 Superstrut Beam Clamp
To connect EMT conduit together to allow for 90 degree bends. UL Approved. For use with 'A' and 'C' series channel and inserts. For channel. 3-1/16".
Halex 26162 2-Hole Snap-On Conduit Strap Thomas And Betts ZA1001/2EG-10 Superstrut Halex 26076 Knock Out Seals
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For use with 'A' and 'C' series channel and inserts. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Steel City ZCK535-10 Armored Cable Hanger Clip Superstrut ZH119 Threaded Rod Coupling Steel City R Threaded Rod
Flexible conduit hanger from drop wire, #8-#12 wire, .433-.535 O.D. cable. For use with channel. Joins two rods of the indicated size. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Superstrut 200 Series Square Conduit Washer Halex 26142 Flat Drive Strap Superstrut 200 Series Square Conduit Washer
GoldGalv finish. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. GoldGalv finish.
Carlon E977DC25-UPC Conduit Clamp Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Drill  5/16'' hole with masonry bit and tap in with hammer. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp Superstrut ZCM1003/8-10 Cone Nut Halex 64410 Conduit Elbow
Drill  5/16'' hole with masonry bit and tap in with hammer. Superstrut Cone Nut, 3/8 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Thomas And Betts Z503-5 Superstrut Beam Clamp Superstrut ZCM1001/2-10 Cone Nut Carlon E977EC20-UPC Conduit Clamp
For hanging rod, silver electroplated finish. Superstrut Cone Nut, 1/2 in Nominal, Nylon Cone, Steel Nut, Galvanized, Gold, For Superstrut Metal Framing and Hanger System Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 61212B 2-Hole Conduit Strap BUSHING GRND MTL INSUL 1-1/4IN Steel City R Threaded Rod
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Framing and hanging applications. Free-running, corrosion resistant, burr-free.
Halex 61205B 2-Hole Conduit Strap Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug Halex 61615B 2-Hole Snap-On Conduit Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 64412 Conduit Elbow Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 61505B 1-Hole Snap-On Cable Strap
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit.
Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug LOCK NUT SEALER 2IN           Halex 61215B 2-Hole Conduit Strap
LOCK NUT SEALER 2IN
Our Price: $8.40
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 61605B 2-Hole Snap-On Conduit Strap Halex 61210B 2-Hole Conduit Strap Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Steel City R Threaded Rod Halex 62191B 1-Hole Service Entrance Strap Halex 64415 Conduit Elbow
Framing and hanging applications. Free-running, corrosion resistant, burr-free. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 62192B 1-Hole Service Entrance Strap Halex 61607B 2-Hole Conduit Strap Halex 61207B 2-Hole Conduit Strap
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 96113 One-Hole Strap Halex 61507B 1-Hole Snap-On Cable Strap Halex 61510B 1-Hole Snap-On Cable Strap
Halex One-Hole Strap, 1 in Nominal, Steel, Zinc Electro Plated, 7/8 in Width, CSA Certified, UL Listed, For Indoor/Outdoor Applications Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit.
Halex 67840 Conduit Hanger Halex 61610B 2-Hole Snap-On Conduit Strap Halex 61515B 1-Hole Snap-On Cable Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. To support EMT conduit.
Halex 61105B 1-Hole Conduit Strap Halex 61520B 1-Hole Snap-On Cable Strap Halex 62194B 1-Hole Service Entrance Strap
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor applications. To support EMT conduit. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 67825 Conduit Hanger Halex 67830 Conduit Hanger Halex 26122 2-Hole Conduit Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 29525 Insulated Metallic Grounding Conduit Bushing with Lug Halex 75212B Insulated Conduit Bushing Halex 67820 Conduit Hanger
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 64420 Conduit Elbow Halex 61120 1-Hole Conduit Strap Halex 61512B 1-Hole Snap-On Cable Strap
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor applications. To support EMT conduit.
DRIVE STRAP 1/2IN 200/CANISTER Thomas And Betts ZB1400HS 10 Superstrut Conduit Channel Strut Halex 26121 2-Hole Conduit Strap
Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Steel half slot strut, gold galvanized. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Thomas And Betts ZA1200HS 4 Superstrut Conduit Channel Strut Halex 61115B 1-Hole Conduit Strap Halex 61110B 1-Hole Conduit Strap
Steel half slot strut, gold galvanized. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 26123 2-Hole Conduit Strap BULB MTL HALIDE CLR 175W      Halex 75215B Insulated Conduit Bushing
BULB MTL HALIDE CLR 175W
Our Price: $17.61
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Clear Metal Halide lamp, 175 watts, ED28, with mogul (E39) base. 10,000 average life hours, 4000K, 9.25"H. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Feit MH100/U/MED Metal Halide Lamp DRIVE STRAP 3/4IN 150/CANISTER BULB LED LGHT CEIL 4K 15W/100W
Feit Electric Metal Halide Lamp, MH100/U/MED Designation, 100 W, Ellipsoidal Dimple Bulb, Medium Screw (E26) Base, ED17 Shape, 10000 hr Average Life, 4000 K Color Temperature, Clear Lamp, Pulse Start, M90 Ballast, 5.43 in Length Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Medium base E26 retrofit ceiling light for installation into existing porcelain socket. Replacement for incandescent. Not dimmable. 120 volt. 50000 hours average life. Screws into most existing plastic and porcelain lamp holders without any wiring required. Also installs in junction boxes for new construction applications. Suitable for damp and dry locations.
Halex 61930 Rigid IMC Conduit Locknut Halex 61107B 1-Hole Conduit Strap Halex 75205B Insulated Conduit Bushing
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 61112B 1-Hole Conduit Strap Halex 61620B 2-Hole Snap-On Conduit Strap Thomas And Betts ZA1200HS 10 Superstrut Conduit Channel Strut
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Steel half slot strut, gold galvanized.
Halex 26124 2-Hole Conduit Strap BULB 175W MTL HALIDE 4200K 1PK Halex 61925 Rigid IMC Conduit Locknut
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Quartz metal halide lamp, E39 mogul base, ED28 bulb, enclosed fixture rated, universal burn, clear, 4200K, 12,800 lumens, 7500 hours horizontal, 10,000 hours vertical, 132 volts, 175 watts. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Thomas And Betts ZA1200HS 6 Superstrut Conduit Channel Strut Halex 96123 2-Hole Conduit Strap ETI Lighting 54606242 Spin Light Ceiling Fixture
Steel half slot strut, gold galvanized. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Spin light, used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Mounts to all lamp holders. Round, 4,000K, white. UV, IR and mercury free. UL/cUL Listed for damp locations.
Halex 75220B Insulated Conduit Bushing Halex 75210B Insulated Conduit Bushing Halex 75207B Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
LIGHT SPIN LED 4000K W/PULL7IN Halex 61125 1-Hole Conduit Strap Metalarc 64819 High Intensity Discharge Metal Halide Lamp
Spin light, used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Mounts to all lamp holders. Round, 4,000K, white. UV, IR and mercury free. UL/cUL Listed for damp locations. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Metal halide general lighting clear lamp, universal operating position. 4000K color temperature, 65 CRI. 15,000 horizontal and 20,000 vertical operation average life hours.
Halex 61912B Rigid IMC Conduit Locknut BULB LIGHT UTILITY LED 2500 L Halex 61907B Rigid IMC Conduit Locknut
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. LED Utility Light Bulb W/ Reflector, 2500 Lumens, 80 CRI, 120 degree Beam Angle, -4104 degree F Operating Temp, E26 Edison Base, 4000k, Average Life/Hours: 30,000, Lamp Wattage: 33~ Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Metalarc Pro-Tech 64547 Quartz Single Ended Metal Halide Lamp LIGHT LED 65W 7IN RETROFIT 27K LIGHT LED 65W 7IN RETROFIT 4K
Metal halide medium base 70 watt PULSE START, clear finish E17 bulb, universal operating position. 75 CRI, 3,000K color temperature. 3400 mean lumens, 10,000 horizontal and 15,000 vertical operation average life hours. Boxed. Medium base E26 retrofit ceiling light for installation into existing porcelain socket. Replacement for incandescent. Not dimmable. 120 volt. 50000 hours average life. Screws into most existing plastic and porcelain lamp holders without any wiring required. Also installs in junction boxes for new construction applications. Suitable for damp and dry locations. Medium base E26 retrofit ceiling light for installation into existing porcelain socket. Replacement for incandescent. Not dimmable. 120 volt. 50000 hours average life. Screws into most existing plastic and porcelain lamp holders without any wiring required. Also installs in junction boxes for new construction applications. Suitable for damp and dry locations.
Halex 61915B Rigid IMC Conduit Locknut BULB LED LGT CEIL 27K 15W/100W Halex 61920B Rigid IMC Conduit Locknut
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Medium base E26 retrofit ceiling light for installation into existing porcelain socket. Replacement for incandescent. Not dimmable. 120 volt. 50000 hours average life. Screws into most existing plastic and porcelain lamp holders without any wiring required. Also installs in junction boxes for new construction applications. Suitable for damp and dry locations. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Carlon E977KC-CAR Conduit Clamp Halex 61905B Rigid IMC Conduit Locknut Halex 71207B 2-Hole Conduit Strap
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 61910B Rigid IMC Conduit Locknut Halex 60795B Knock Out Seals Halex 60797B Knockout Seal
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 67850 Conduit Hanger Halex 67800B Conduit Hanger Raco 1370 Reducing Washer
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Used to reduce the size of the conduit hole opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. All steel construction. Zinc electro plated for corrosion protection.
Halex 67810B Conduit Hanger BULB LED LIGHT CEILNG 27K 120W BULB LED LIGHT CEILNG 4K 120W
</