Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > RIGID CONDUIT FITTINGS
Choose a sub category:
RECESSED RETROFIT LED CEILING LIGHT RETROFIT
Sort By:
1
Halex 71205B 2-Hole Conduit Strap Halex 61612B 2-Hole Snap-On Conduit Strap Halex 71210B 2-Hole Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 71212B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Halex 71215B 2-Hole Conduit Strap Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Carlon A240D-CAR 1-Piece Conduit Coupling
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Halex 96111 1-Hole Conduit Strap Halex 61220B 2-Hole Conduit Strap Halex 90701 Conduit Chase Nipple
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Carlon A243D-CAR 1-Piece Snap-In Conduit Adapter Halex 71220B 2-Hole Conduit Strap Carlon A253E-CAR 1-Piece Snap-In Terminal Adapter
Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Halex 96121 2-Hole Conduit Strap Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 96151 1-Hole Snap-On Conduit Strap Halex 91321 Reducing Conduit Bushing Carlon A253D-CAR 1-Piece Snap-In Terminal Adapter
Indoor or outdoor applications. To support EMT conduit. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Halex 96780 Conduit Hanger Halex 96161 2-Hole Snap-On Conduit Strap Halex 96112 1-Hole Conduit Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 96213 1-Hole Cable Strap Halex 96781 Conduit Hanger Carlon A240E-CAR 1-Piece Conduit Coupling
Steel, use to secure BX cable to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Halex 96122 2-Hole Conduit Strap Halex 91641 Box Spacer
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
Carlon A243E-CAR 1-Piece Snap-In Conduit Adapter Halex 96162 2-Hole Snap-On Conduit Strap Halex 91331 Reducing Conduit Bushing
Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 16405B Box Spacer STRAP CBL 1HOLE SRVC ENT      Halex 91332 Reducing Conduit Bushing
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 96152 1-Hole Snap-On Conduit Strap Halex 26155 1-Hole Snap-On Conduit Strap Halex 64005 Conduit Coupling
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 26211 1-Hole Conduit Strap Halex 61225 2-Hole Conduit Strap Halex 26210 1-Hole Service Entrance Strap
Steel, use to secure BX cable to wood, masonry or similar surface. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Halex 90702 Conduit Chase Nipple Halex 16010B Ground Clamp Halex 26165 2-Hole Snap-On Conduit Strap
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26153 1-Hole Snap-On Conduit Strap Halex 26125 2-Hole Conduit Strap Halex 96401 Conduit Coupling
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 16407B Box Spacer Gardner Bender GGS-1512R Ground Screw Carlon E977LC-CAR Conduit Clamp
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Green round washer head screw for switch and outlet boxes. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 26163 2-Hole Snap-On Conduit Strap Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26126 2-Hole Conduit Strap
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
STRAP CBL 1HOLE OVAL SRVC ENT Eritech CP58 Acorn Standard Duty Ground Clamp Halex 96402 Conduit Coupling
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Gardner Bender GCC-310 2-Hole Conduit Strap Halex 26154 1-Hole Snap-On Conduit Strap Halex 93591 Ground Clamp
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Indoor or outdoor applications. To support EMT conduit. Connects grounding wire to the grounding rod.
Halex 67860 Conduit Hanger Halex 26156 1-Hole Snap-On Conduit Strap Gardner Bender GGC-1508 Ground Clip
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor applications. To support EMT conduit. For aluminum or copper grounding wire zinc plated.
Halex 26166 2-Hole Snap-On Conduit Strap Eritech ZWP1J Grounding Pipe Clamp Halex 90703 Conduit Chase Nipple
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Halex 61230 2-Hole Conduit Strap Gardner Bender GGP-1502 Grounding Pigtail
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal.
Halex 64010 Conduit Coupling Halex 26164 2-Hole Snap-On Conduit Strap Gardner Bender GCC-410 2-Hole Conduit Strap
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Gardner Bender 14-GRC Ground Clamp Thomas & Betts E977HC-CTN 2-Hole Conduit Clamp Fishock GRC-FS Ground Clamp
Connects grounding wire to the grounding rod. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage.
Gardner Bender GCC-120 2-Hole Conduit Strap Gardner Bender GCC-510 2-Hole Conduit Strap Gardner Bender GCC-220 2-Hole Conduit Strap
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 07012 Conduit Chase Nipple Halex 36010 Ground Clamp Thomas & Betts E977JCR-CTN 2-Hole Conduit Clamp
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 64012 Conduit Coupling Halex 94105 Pull Conduit Elbow with Neoprene Gasket Eritech CWP1J Grounding Pipe Clamp
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
Gardner Bender GCC-610 2-Hole Conduit Strap Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket
Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket Halex 07015 Conduit Chase Nipple
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 93592 Ground Clamp Halex 26141 Flat Drive Strap Halex 26151 1-Hole Snap-On Conduit Strap
Connects grounding wire to the grounding rod. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Indoor or outdoor applications. To support EMT conduit.
Halex 61130 1-Hole Conduit Strap Halex 59505 Service Entrance Elbow Halex 26152 1-Hole Snap-On Conduit Strap
Steel, indoor or outdoor. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. Tray boxed. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Indoor or outdoor applications. To support EMT conduit.
Halex 04010 Offset Nipple Halex 26161 2-Hole Snap-On Conduit Strap Halex 64015 Conduit Coupling
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket Halex 94107 Pull Conduit Elbow Halex 21642 Box Spacer
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
Halex 64105 Conduit Elbow Halex 26162 2-Hole Snap-On Conduit Strap Halex 36019 Ground Clamp
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Halex 64320 Conduit Nipple Halex 26142 Flat Drive Strap Eritech CWP1JU Grounding Pipe Clamp
Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Carlon E977DC25-UPC Conduit Clamp Thomas & Betts E977NDC-CTN 1-Piece Conduit Clamp Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Drill  5/16'' hole with masonry bit and tap in with hammer. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 04012 Offset Nipple Thomas & Betts E977NEC-CTN 1-Piece Conduit Clamp Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Drill  5/16'' hole with masonry bit and tap in with hammer. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket Halex 07020 Conduit Chase Nipple
Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 64107 Conduit Elbow Halex 59507 Service Entrance Elbow Carlon E977EC20-UPC Conduit Clamp
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket Halex 63299 Ground Screw Halex 61212B 2-Hole Conduit Strap
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Eritech 811260UPC Grounding Rod Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed.
Halex 64020 Conduit Coupling Halex 61205B 2-Hole Conduit Strap Halex 36020 Ground Clamp
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed.
Halex 04015 Offset Nipple Halex 58610 Rigid Threaded Conduit Body with Cover and Gasket Halex 61615B 2-Hole Snap-On Conduit Strap
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Erico 815860UPC Grounding Rods Halex 59510 Service Entrance Elbow Eritech 615840UPC Grounding Rod
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Halex 61505B 1-Hole Snap-On Cable Strap Halex 64110 Conduit Elbow Halex 61215B 2-Hole Conduit Strap
Indoor or outdoor applications. To support EMT conduit. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 61605B 2-Hole Snap-On Conduit Strap Halex 94110 Pull Conduit Elbow with Neoprene Gasket Eritech CWP2J Grounding Pipe Clamp
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Halex 61210B 2-Hole Conduit Strap Halex 58810 Rigid Threaded Conduit Body with Cover and Gasket Halex 62191B 1-Hole Service Entrance Strap
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface.
Eritech 815880UPC Grounding Rod Halex 62192B 1-Hole Service Entrance Strap Halex 59512 Service Entrance Elbow
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Eritech 611380UPC Grounding Rod Halex 61607B 2-Hole Conduit Strap Halex 61207B 2-Hole Conduit Strap
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 04020 Offset Nipple Halex 64025 Conduit Coupling Halex 96113 One-Hole Strap
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Halex One-Hole Strap, 1 in Nominal, Steel, Zinc Electro Plated, 7/8 in Width, CSA Certified, UL Listed, For Indoor/Outdoor Applications
Halex 61507B 1-Hole Snap-On Cable Strap Halex 61510B 1-Hole Snap-On Cable Strap Halex 67840 Conduit Hanger
Indoor or outdoor applications. To support EMT conduit. Indoor or outdoor applications. To support EMT conduit. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 64112 Conduit Elbow Halex 58612 Rigid Threaded Conduit Body with Cover and Gasket Gardner Bender GGP-1261 Grounding Pigtail
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. AWG number 12 solid wire. 6-1/2" long with captured screw, other end stripped.
Halex 61610B 2-Hole Snap-On Conduit Strap Eritech 615880UPC Grounding Rod Erico IBTB Intersystem Bonding Termination
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Intersystem bonding termination for residential and small commercial facilities. Meets the requirements of 2008 NEC Article 250.94.  Accommodates (5) 14 - 2 AWG bonding conductors and (1) 6 - 2 AWG grounding electrode conductor. Integral mounting base for easy installation. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL requirements for weatherability performance. Includes corrosion-resistant, stainless steel mounting hardware. Connects to grounding electrode conductor - does not rely on meter base enclosure bonding connection. 1.41" depth x 2.01" width x 4.5" length. cULus Listed.
Halex 67825 Conduit Hanger Halex 67830 Conduit Hanger Halex 61515B 1-Hole Snap-On Cable Strap
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor applications. To support EMT conduit.
Eritech EDS58 Drive Sleeve Halex 61105B 1-Hole Conduit Strap Halex 61520B 1-Hole Snap-On Cable Strap
The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor applications. To support EMT conduit.
Halex 62194B 1-Hole Service Entrance Strap Halex 67820 Conduit Hanger Halex 26122 2-Hole Conduit Strap
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 64115 Conduit Elbow Halex 58615 Rigid Threaded Conduit Body with Cover and Gasket Halex 16320 Conduit Hubs
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat.
Feit LU70 High Intensity Discharge Metal Halide Lamp Feit LU400 High Intensity Discharge Metal Halide Lamp Halex 61120 1-Hole Conduit Strap
Provides a soft yellow light. Use only in fixtures designed for this type and wattage bulb. 24,000 average life hours. Sleeved. Provides a soft yellow light. Use only in fixtures designed for this type and wattage bulb. 24,000 average life hours. Sleeved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Feit LU70/MED High Intensity Discharge Metal Halide Lamp Halex 61512B 1-Hole Snap-On Cable Strap BULB MTL HALIDE CLR 175W
BULB MTL HALIDE CLR 175W
Our Price: $17.61
Provides a soft yellow light. Use only in fixtures designed for this type and wattage bulb. 24,000 average life hours. 5-7/16" overall length. Boxed. Indoor or outdoor applications. To support EMT conduit. Clear Metal Halide lamp, 175 watts, ED28, with mogul (E39) base. 10,000 average life hours, 4000K, 9.25"H.
DRIVE STRAP 1/2IN 200/CANISTER LED T24 G13 2FT 10W ACRY 4100K LED T24 850 2FT LNR 10W 5000K
Indoors or outdoors. To secure EMT conduit to a wood or masonry surface. Shatter proof acrylic lens. Indoor only. Converts existing fluorescent fixture to LED technology. No replacing or rewiring of lamp holders required. No replacement of the ballast. Instant full brightness (including sub-zero temperature). Energy saving, mercury free. 50,000 average life hours. UL/CUL Listed, FCC and RoHS Compliant. Shatter proof acrylic lens. Indoor only. Converts existing fluorescent fixture to LED technology. No replacing or rewiring of lamp holders required. No replacement of the ballast. Instant full brightness (including sub-zero temperature). Energy saving, mercury free. 50,000 average life hours. UL/CUL Listed, FCC and RoHS Compliant.
Feit MH100/U/MED Metal Halide Lamp Halex 26121 2-Hole Conduit Strap Halex 61115B 1-Hole Conduit Strap
Feit Electric Metal Halide Lamp, MH100/U/MED Designation, 100 W, Ellipsoidal Dimple Bulb, Medium Screw (E26) Base, ED17 Shape, 10000 hr Average Life, 4000 K Color Temperature, Clear Lamp, Pulse Start, M90 Ballast, 5.43 in Length Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61110B 1-Hole Conduit Strap Halex 26123 2-Hole Conduit Strap DRIVE STRAP 3/4IN 150/CANISTER
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.
Erico 615800UPC Grounding Rods Halex 59515 Service Entrance Elbow BULB LED T8 IPS 4100K 17W 2FT
LED 17W 2FT T8 IPS 4100K
Our Price: $20.42
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. LED G13 base. Designed to replace traditional fluorescent T8 lamps. Contains no mercury, provides instant light.
Halex 61107B 1-Hole Conduit Strap Sylvania 67435 High Intensity Discharge Lamp Sylvania Lumalux High Intensity Discharge Bulb
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. High pressure sodium in retail pack. Universal operating positions. 5.43" MOL, 2.13" diameter 21 CRI, 1900K. High pressure sodium in retail pack. Universal operating positions. 5.43" MOL, 2.13" diameter 21 CRI, 1900K.
BULB 175W MTL HALIDE 4200K 1PK Halex 04005B Offset Nipple Halex 61112B 1-Hole Conduit Strap
Quartz metal halide lamp, E39 mogul base, ED28 bulb, enclosed fixture rated, universal burn, clear, 4200K, 12,800 lumens, 7500 hours horizontal, 10,000 hours vertical, 132 volts, 175 watts. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces.
Halex 61620B 2-Hole Snap-On Conduit Strap Halex 64120 Conduit Elbow BULB 100W HPS HID 2100K 1PK
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. High pressure sodium HID lamp, E26 medium base, E17 bulb, universal burn, clear, 2100K, 9500 lumens, 24000 hours, 22 CRI. 1.12? arc length (28.4mm), 2.126 diameter. 5.43 MOL. 100 watt, 55 volts. Universal operating position, warm-up time 3-4 minutes.
Halex 26124 2-Hole Conduit Strap Halex 96123 2-Hole Conduit Strap Halex 58620 Rigid Threaded Conduit Body with Cover and Gasket
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 59520 Service Entrance Elbow Heathco HZ-5694 Bulb Metalarc 64819 High Intensity Discharge Metal Halide Lamp
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Long life, bulb averages 18,000 life hours. E26 medium base bulb. 5.83" overall length. 120 volt, boxed. Metal halide general lighting clear lamp, universal operating position. 4000K color temperature, 65 CRI. 15,000 horizontal and 20,000 vertical operation average life hours.
Halex 61125 1-Hole Conduit Strap Halex 04007B Offset Nipple Metalarc Pro-Tech 64547 Quartz Single Ended Metal Halide Lamp
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Metal halide medium base 70 watt PULSE START, clear finish E17 bulb, universal operating position. 75 CRI, 3,000K color temperature. 3400 mean lumens, 10,000 horizontal and 15,000 vertical operation average life hours. Boxed.
Halex 64125 Conduit Elbow Raco 975 Ground Clip Carlon E977KC-CAR Conduit Clamp
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. For grounding switch and outlet boxes using non-metallic sheathed cables from No. 14 to No. 10. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Halex 71207B 2-Hole Conduit Strap Halex 67850 Conduit Hanger Halex 67800B Conduit Hanger
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt.
Halex 67810B Conduit Hanger LED T48 830 4FT17W LNR 3000K  LED T48 841 4FT17W LNR 4100K
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Shatter proof acrylic lens. Indoor only. Converts existing fluorescent fixture to LED technology. No replacing or rewiring of lamp holders required. No replacement of the ballast. Instant full brightness (including sub-zero temperature). Energy saving, mercury free. 50,000 average life hours. UL/CUL Listed, FCC and RoHS Compliant. Shatter proof acrylic lens. Indoor only. Converts existing fluorescent fixture to LED technology. No replacing or rewiring of lamp holders required. No replacement of the ballast. Instant full brightness (including sub-zero temperature). Energy saving, mercury free. 50,000 average life hours. UL/CUL Listed, FCC and RoHS Compliant.