Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > EMT METAL CONDUIT FITTINGS
Choose a sub category:
EMT FITTINGS - COMPRESSION HIGH PRESSURE SODIUM BULBS EMT FITTINGS - SET SCREW
MERCURY VAPOR BULBS METAL HALIDE BULBS
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Halex 97521 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E940E-CTN/CAR Standard Conduit Coupling Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter Halex 97522 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E943FR-CTN Terminal Adapter Halex 97525 Insulated Conduit Bushing Carlon E996DR-CTN Conduit Box Adapter
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For PVC enclosures. cULus Listed.
Carlon E940GR-CTN Standard Conduit Coupling Halex 96191 Rigid IMC Conduit Locknut Carlon E942FR-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter Halex 96071 Knock Out Seals
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96072 Knock Out Seals Carlon UA9ADR-CTN Standard Radius Conduit Elbow Halex 97523 Insulated Conduit Bushing
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter Carlon UA7ADB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 91211 Concrete Tight Set Screw Connector Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 96192 Rigid IMC Conduit Locknut
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26190 Conduit Locknut Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 91221 Concrete Tight Set Screw Coupling Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon UA7AER-CAR Standard Radius Conduit Elbow Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA7AEB-CTN Standard Radius Conduit Elbow Halex 91212 Concrete Tight Set Screw Connector Halex 96194 Rigid IMC Conduit Locknut
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 90211 Compression Connector Halex 91222 Concrete Tight Set Screw Coupling Carlon UA9AFR-CTN Standard Radius Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E943JRR Terminal Adapter Carlon E942JR Conduit Adapter Carlon UA7AFR-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon UA9AFB-CTN Standard Radius Conduit Elbow Halex 12110 Concrete Tight Set Screw Connector Halex 96195 Rigid Conduit Locknut
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26071 Knock Out Seals Halex 90221 Concrete Tight Compression Coupling Carlon UA7AFB-CTN Standard Radius Conduit Elbow
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 90212 Concrete Tight Rain Tight Compression Connector Thomas & Betts E994DR-CTN Conduit Offset Halex 12210B Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Non-conductive. Will not rust or corrode. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 97526 Insulated Conduit Bushing Carlon E950FD-CAR Reducing Conduit Bushing Carlon UA9AGR-CTN Standard Radius Conduit Elbow
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling Halex 90222 Concrete Tight Compression Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Thomas & Betts E950FE-CTN Reducing Bushing Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Carlon E943K-CTN Terminal Adapter Carlon UA7AGB-CAR Standard Radius Conduit Elbow Halex 96196 Rigid IMC Conduit Locknut
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Thomas & Betts E994ER-CTN Conduit Offset Halex 02110 Compression Connector Carlon UA9AH-CAR Standard Radius Conduit Elbow
Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 21210 Concrete Tight Set Screw Connector Halex 75225 Insulated Conduit Bushing Carlon UA7AHR-CTN Standard Radius Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body Halex 90401 Offset Nipple
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 01925B IMC Conduit Locknut Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex 02210 Concrete Tight Compression Coupling Carlon E940LR/CTN Conduit Coupling Halex 90661 Standard Water-Tight Connector
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Halex 12112 Concrete Tight Set Screw Connector Carlon E950GE-CAR Reducing Conduit Bushing Thomas & Betts E950GF-CTN Reducing Bushing
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 03707B Concrete Tight Set Screw Conduit Offset Carlon UA9AGB-CTN Standard Radius Conduit Elbow Halex 12212 Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon E987D-CTN Rigid Conduit Body Halex 26073 Knock Out Seals Halex 75230 Insulated Conduit Bushing
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 90662 Standard Water-Tight Connector Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E950HGR Reducing Bushing Halex 90372 Concrete Tight Set Screw Conduit Offset Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter Carlon UB9AE-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E950JHR Reducing Conduit Bushing Halex 64405 Conduit Elbow Halex 02905B Compression Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 26074 Knock Out Seals Halex 90402 Offset Nipple Carlon E983E-CTN Rigid IMC Conduit Body
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body Halex 12215 Concrete Tight Set Screw Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon E985E-CTN Rigid Conduit Body Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex 14405 Pull Conduit Elbow LOCK NUT SEALER 1/2IN         Carlon UA7AJ-CAR Standard Radius Conduit Elbow
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 12115 Concrete Tight Set Screw Connector Halex 21212 Concrete Tight Set Screw Connector Halex 26075 Knock Out Seals
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 02112 Compression Connector Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Carlon UA7AJB-CAR Standard Radius Conduit Elbow Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 07310 Compression Standard Water-Tight Connector Halex 64505 Conduit Elbow Halex 64507 Conduit Elbow
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. To connect EMT conduit together to allow for 45 degree bends. To connect EMT conduit together to allow for 45 degree bends.
Carlon E942L-CAR Conduit Adapter Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Carlon UA9AJ-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA9AJB-CAR Standard Radius Conduit Elbow Halex 02212 Concrete Tight Compression Coupling Carlon E987F-CAR Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Halex 12120 Concrete Tight Set Screw Connector Halex 14407 Pull Conduit Elbow Halex 58005 Standard Weatherhead Service Entrance Cap
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed.
Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow Halex 61820B IMC Sealer Locknut Halex 12220 Concrete Tight Set Screw Coupling
Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon UB9AG-CAR Standard Radius Conduit Elbow Halex 64407 Conduit Elbow Halex 20210 Concrete Tight Compression Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon E995GR Meter Offset Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body Halex 21222 Concrete Tight Set Screw Coupling
For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 60416 Light Duty Wire Holder Halex 58007 Clamp On Weatherhead Service Entrance Cap Carlon E998E-CAR Service Entrance Cap
Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed. Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E995J-CTN Meter Offset Carlon E990DER-CAR Pull Elbow With Reducer Bushing Halex 02115 Compression Connector
For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 26076 Knock Out Seals Halex 21211 Concrete Tight Set Screw Connector Halex 14605 Inside Corner Pull Conduit Elbow
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed.
Carlon E998F-CAR Standard Weatherhead Service Entrance Cap Halex 08212B Compression Standard Water-Tight Connector Halex 21221 Concrete Tight Set Screw Coupling
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon UAFAD Flexible Conduit Elbow Carlon E983GR-CAR Rigid IMC Conduit Body Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body
Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Carlon E998G-CAR Service Entrance Cap Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug Halex 20221 Concrete Tight Compression Coupling Halex 64410 Conduit Elbow
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 20212 Concrete Tight Compression Connector Carlon UB9AH-CAR Standard Radius Conduit Elbow Halex 58010 Clamp On Weatherhead Service Entrance Cap
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed.
Carlon UAFAE Flexible Conduit Elbow Carlon UA9AK-CAR Standard Radius Conduit Elbow Siemens EC38599 Type RX Conduit Hub
Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use on all Siemans and Murry single position meter sockets.
Siemens EC38598 Type RX Conduit Hub GE TC100P Rainproof Conduit Hub GE TC125P Rainproof Conduit Hub
For use on all Siemans and Murry single position meter sockets. For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps.
GE TC150P Rainproof Conduit Hub GE TC200P Rainproof Conduit Hub BUSHING GRND MTL INSUL 1-1/4IN
For outdoor enclosures with removable closing caps. For outdoor enclosures with removable closing caps. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Carlon E987G-CAR Rigid Conduit Body Halex 02220 Concrete Tight Compression Coupling Halex 14607 Inside Corner Pull Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed.
Carlon E998H-CAR Standard Weatherhead Service Entrance Cap Carlon E970CD-CTN Rigid Round Conduit Body with Cover Carlon E987H-CAR Rigid Conduit Body
Safe, non-conductive. To bring overhead wiring from outside into conduit run. Will not rust or corrode. For use with Schedule 40/80 non-metallic solvent weld fittings. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed.
Halex 20222 Concrete Tight Compression Coupling Carlon E970CE-CTN Rigid Round Conduit Body with Cover Halex 58012 Clamp On Weatherhead Service Entrance Cap
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Aluminum die cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL Listed meets CSA requirements. Tray boxed.
Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug Halex 57499 Oval Standard Service Cable Cap IMC Carlon E983H-CAR Rigid IMC Conduit Body
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Copper-free aluminum die cast. Indoor or outdoor applications. Use in overhead services that utilize SEU cable. Tray boxed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Halex 60222 Wire Holder Halex 64412 Conduit Elbow Siemens EC38597 Type RX Conduit Hub
Used indoors or outdoors to secure incoming service entrance wires. Reinforced. Porcelain and steel. Tray box. To connect EMT conduit together to allow for 90 degree bends. UL Approved. For use on all Siemans and Murry single position meter sockets.
Carlon UB9AJ-CAR Standard Radius Conduit Elbow Siemens ECHS125 Type HS Conduit Hub Siemens ECHS150 Type HS Conduit Hub
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225. For use on all Siemens loadcenters, main lug, main breaker and meter socket; plus enclosed circuit breakers Nos. WB2225, WB3225.
Thomas & Betts E970CDE-CTN Rigid/Non-Metallic Junction Box Carlon UA7AKB-CAR Standard Radius Conduit Elbow Halex 58705 EMT Set Screw Conduit Body with Cover and Gasket
Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug HUB METER SKT TYPE RX 2-1/2IN Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For use on all Siemans and Murry single position meter sockets. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
LOCK NUT SEALER 2IN           Thomas & Betts E986J-CTN Type LB Rigid/IMC Conduit Body Carlon E950LJ-CAR Reducing Conduit Bushing
LOCK NUT SEALER 2IN
Our Price: $8.40
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon E950KJ-CAR Reducing Conduit Bushing Eaton DS125H1P Rainproof Conduit Hub Eaton DS150H1P Rainproof Conduit Hub
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with MLO and MCB loadcenters and circuit breaker enclosures. For use with MLO and MCB loadcenters and circuit breaker enclosures.
Carlon UAFAF Conduit Elbow Feit LEDR4/827 Dimmable Retrofit Light Kit LED RTF KIT 4IN DIM 9.5W 5000K
Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. Feit Electric Retrofit Light Kit, Dimmable, LED Lamp, 9.3 W Lamp, Suitable For Use With: 4 in Recessed Cans, 3.45 in Overall Height, 3.8 in Overall Depth, Includes: Standard Base E26 Adapter and a Pre-Mounted Trim, Energy Star Approved, RoHS Compliant, UL Listed, 120 V Input Line Voltage, For Wet Locations and Recessed Lighting Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed.
Carlon UA9AKB-CAR Standard Radius Conduit Elbow Eaton ARP00004CH12 Type A Hub Closure Plate Eaton ARP00005CH15 Type A Hub Closure Plate