Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > BX / FLEX CONDUIT FITTINGS
Choose a sub category:
RECESSED RETROFIT LED CEILING LIGHT RETROFIT
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Halex 97521 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E940E-CTN/CAR Standard Conduit Coupling Carlon E942DR-CTN Conduit Adapter Carlon E942ER-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter Halex 97522 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E943FR-CTN Terminal Adapter Halex 97525 Insulated Conduit Bushing Carlon E996DR-CTN Conduit Box Adapter
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For PVC enclosures. cULus Listed.
Carlon E940GR-CTN Standard Conduit Coupling Halex 96191 Rigid IMC Conduit Locknut Carlon E942FR-CTN Conduit Adapter
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter Halex 90440 Screw-In Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Halex 96071 Knock Out Seals Halex 96072 Knock Out Seals Carlon UA9ADR-CTN Standard Radius Conduit Elbow
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 97523 Insulated Conduit Bushing Carlon E940HR-CTN Standard Conduit Coupling Carlon E943GR-CTN Terminal Adapter
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UA7ADB-CTN Standard Radius Conduit Elbow Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 96192 Rigid IMC Conduit Locknut
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26190 Conduit Locknut Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 90441 Screw-In Connector Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 90451 Screw-In Coupling Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter
Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Thomas & Betts E950ED-CTN Reducing Bushing Carlon UA7AER-CAR Standard Radius Conduit Elbow Carlon E940JR-CTN Standard Conduit Coupling
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Carlon E942HR Conduit Adapter Halex 90580 Cable Connector Carlon UA7AEB-CTN Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 96194 Rigid IMC Conduit Locknut Halex 90481 Concrete Tight Set Screw Connector Carlon UA9AFR-CTN Standard Radius Conduit Elbow
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon E943JRR Terminal Adapter Halex 90570 Combination Clamp Connector Carlon E942JR Conduit Adapter
Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Carlon UA7AFR-CAR Standard Radius Conduit Elbow Carlon UA9AFB-CTN Standard Radius Conduit Elbow Halex 90442 Screw-In Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Halex 91100 Conduit Elbow Halex 96195 Rigid Conduit Locknut Halex 26071 Knock Out Seals
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 90420 Squeeze Connector Halex 65705B Snap-In Cable Connector Carlon UA7AFB-CTN Standard Radius Conduit Elbow
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Thomas & Betts E994DR-CTN Conduit Offset Halex 90421 Squeeze Connector Halex 97526 Insulated Conduit Bushing
Non-conductive. Will not rust or corrode. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E950FD-CAR Reducing Conduit Bushing Halex 75403 Anti-Short Conduit Bushing Carlon UA9AGR-CTN Standard Radius Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling CONNECTOR DPLX FLX N-MTL 3/8IN
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved.
Halex 91531 Combination Coupling Halex 90422 Squeeze Connector Halex 91101 Conduit Elbow
Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Thomas & Betts E950FE-CTN Reducing Bushing Carlon E943K-CTN Terminal Adapter Carlon UA7AGB-CAR Standard Radius Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector Halex 96196 Rigid IMC Conduit Locknut Thomas & Betts E994ER-CTN Conduit Offset
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Non-conductive. Will not rust or corrode.
Halex 75400 Anti-Short Conduit Bushing Carlon UA9AH-CAR Standard Radius Conduit Elbow Halex 75225 Insulated Conduit Bushing
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon UA7AHR-CTN Standard Radius Conduit Elbow Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Halex 01925B IMC Conduit Locknut Carlon UB9AD-CAR Standard Radius Conduit Elbow Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Halex 90452 Screw-In Coupling Carlon E940LR/CTN Conduit Coupling Halex 11005B Conduit Elbow
Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Carlon E950GE-CAR Reducing Conduit Bushing Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Thomas & Betts E950GF-CTN Reducing Bushing
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon UA9AGB-CTN Standard Radius Conduit Elbow Carlon E987D-CTN Rigid Conduit Body Halex 20581 Cable Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable.
Halex 26073 Knock Out Seals Halex 75230 Insulated Conduit Bushing Carlon UA7AHB-CAR Standard Radius Conduit Elbow
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E983D-CTN Rigid IMC Conduit Body Thomas & Betts E950HGR Reducing Bushing Halex 75401 Anti-Short Conduit Bushing
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Halex 91102 Pull Conduit Elbow Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex Straight Liquid Tight Connector Carlon E942K-CAR Conduit Adapter Carlon E943L-CAR Terminal Adapter
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Carlon UB9AE-CAR Standard Radius Conduit Elbow Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector Carlon E950JHR Reducing Conduit Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 91625 Multi-Piece Liquid Tight Compression Connector Halex 64405 Conduit Elbow Halex 75402 Anti-Short Conduit Bushing
Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Halex 16205B Multi-Piece Liquid Tight Conduit Connector Halex 26074 Knock Out Seals Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Carlon E983E-CTN Rigid IMC Conduit Body Carlon UB9AF-CAR Standard Radius Conduit Elbow Thomas & Betts E986E-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
Carlon E985E-CTN Rigid Conduit Body Carlon E984E-CTN Rigid Conduit Body Thomas & Betts E986F-CTN Type LB Rigid/IMC Conduit Body
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance.
LOCK NUT SEALER 1/2IN         Carlon UA7AJ-CAR Standard Radius Conduit Elbow Halex 26075 Knock Out Seals
LOCK NUT SEALER 1/2IN
Our Price: $3.36
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Carlon E983FR-CTN Rigid IMC Conduit Body Carlon E987E-CTN Rigid Conduit Body Carlon UA7AJB-CAR Standard Radius Conduit Elbow
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 64505 Conduit Elbow Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Halex 64507 Conduit Elbow
To connect EMT conduit together to allow for 45 degree bends. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. To connect EMT conduit together to allow for 45 degree bends.
Carlon E942L-CAR Conduit Adapter Carlon E990DR-CAR Access Pull Standard Radius Conduit Elbow Carlon UA9AJ-CAR Standard Radius Conduit Elbow
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA9AJB-CAR Standard Radius Conduit Elbow Carlon E987F-CAR Rigid Conduit Body Carlon E990ER-CAR Access Pull Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included.
Halex 61820B IMC Sealer Locknut Carlon UB9AG-CAR Standard Radius Conduit Elbow Halex 64407 Conduit Elbow
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Carlon E995GR Meter Offset Thomas & Betts E986GR Type LB Rigid/IMC Conduit Body Halex Liquid Tight Connector
For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 27691 Liquid Tight Conduit Elbow Halex 20491 Combination Coupling Halex 16207B Multi-Piece Liquid Tight Conduit Connector
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Carlon E995J-CTN Meter Offset Carlon E990DER-CAR Pull Elbow With Reducer Bushing Halex 91627 Multi-Piece Liquid Tight Conduit Connector
For installation from Schedule 40/80 non-metallic conduit runs into meter box. Will not rust or corrode. Access pull point for cable in tight radius. Allows conduit changes in direction. Won't rust or corrode. Gasket included. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved.
Halex 26076 Knock Out Seals Halex 26571 Flexible MC Snap-In Connector Carlon UAFAD Flexible Conduit Elbow
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector Halex 16905B Multi-Piece Liquid Tight Conduit Elbow Carlon E983GR-CAR Rigid IMC Conduit Body
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E986HR Type LB Rigid/IMC Conduit Body Halex 04212 Squeeze Connector Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug
Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Halex 64410 Conduit Elbow Carlon UB9AH-CAR Standard Radius Conduit Elbow Halex 91695 Multi-Piece Liquid Tight Conduit Elbow
To connect EMT conduit together to allow for 90 degree bends. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Halex 27692 Liquid Tight Conduit Elbow Carlon UAFAE Flexible Conduit Elbow Carlon UA9AK-CAR Standard Radius Conduit Elbow
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
BUSHING GRND MTL INSUL 1-1/4IN Carlon E987G-CAR Rigid Conduit Body Carlon E970CD-CTN Rigid Round Conduit Body with Cover
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode.
Carlon E987H-CAR Rigid Conduit Body Carlon E970CE-CTN Rigid Round Conduit Body with Cover Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Carlon E983H-CAR Rigid IMC Conduit Body Halex 64412 Conduit Elbow Halex 20492 Combination Coupling
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified.
Carlon UB9AJ-CAR Standard Radius Conduit Elbow Thomas & Betts E970CDE-CTN Rigid/Non-Metallic Junction Box Carlon UA7AKB-CAR Standard Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Four knock-out type socket openings, 90 degree spacing. Includes separate mounting feet, cover and gasket. Non-conductive. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 16210B Multi-Piece Liquid Tight Conduit Connector Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
LOCK NUT SEALER 2IN           Thomas & Betts E986J-CTN Type LB Rigid/IMC Conduit Body Carlon E950LJ-CAR Reducing Conduit Bushing
LOCK NUT SEALER 2IN
Our Price: $8.40
Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Carlon E950KJ-CAR Reducing Conduit Bushing Halex 16907B Multi-Piece Liquid Tight Conduit Elbow Carlon UAFAF Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Made of a highly durable plastic (PVC) compound making the product nonmetallic and safe to install. Elbow is non-corrosive, rustproof, and easily pliable. Good for those applications that requires change of direction. UL listed.
Halex 91697 Multi-Piece Liquid Tight Conduit Elbow Carlon UA9AKB-CAR Standard Radius Conduit Elbow Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug
Indoors or outdoors. Multi-piece, use to connect flexible metallic or type B non-metallic liquid-tight conduit to a steel outlet box, metal enclosure or hub. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Carlon UA7AK-CAR Standard Radius Conduit Elbow Halex 64415 Conduit Elbow Carlon Carflex LT43G Liquid Tight Straight Conduit Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. To connect EMT conduit together to allow for 90 degree bends. UL Approved. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Carlon LN20FA-CAR 1-Piece Liquid Tight Conduit Elbow Halex 16210 Multi-Piece Liquid Tight Compression Connector Carlon UA9AL-CAR Standard Radius Conduit Elbow
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA9DJ Large Radius Conduit Elbow Carlon E983J-CAR Rigid IMC Conduit Body Carlon UA9DJB-UPC Large Radius Conduit Elbow
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Carlon E987J-CAR Rigid Conduit Body Carlon UA7AL-CAR Standard Radius Conduit Elbow Carlon E945D-CAR Expansion Joint
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum.
Carlon E945E-CAR Expansion Joint Carlon UA9DK Large Radius Conduit Elbow Halex 16910 Multi-Piece Liquid Tight Conduit Elbow
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Halex 16212B Multi-Piece Liquid Tight Conduit Connector Halex 29525 Insulated Metallic Grounding Conduit Bushing with Lug Carlon UA9DKB-UPC Large Radius Conduit Elbow
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex 75212B Insulated Conduit Bushing Carlon UA9ALB-CAR Standard Radius Conduit Elbow Halex 64420 Conduit Elbow
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Carlon UB9AL-CAR Standard Radius Conduit Elbow Carlon E945F-CAR Expansion Joint LED GROW LT A19 9WRED ENRICHED
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. Non-dimmable A19 LED grow light lasts up to 25,000 hours, Red spectrum enriched for budding and flowering. Emits more light in the useful 450nm blue and 655nm red spectrum than regular white LED bulbs. Rated for high humidity use. Instant full brightness. 9 watts, 120 volts, UL/CUL Listed, FCC Compliant. 4.5" length x 2.25" diameter.
Carlon E945G Expansion Joint Carlon UA9DL Large Radius Conduit Elbow Carlon UA9FJ-UPC Large Radius Conduit Elbow
Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6'' maximum. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL Listed.
Halex 16215B Multi-Piece Liquid Tight Conduit Connector