Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > NON METALLIC CABLE CONNECTORS
Sort By:
1
Halex 97521 Insulated Conduit Bushing Halex 97522 Insulated Conduit Bushing Halex 97525 Insulated Conduit Bushing
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 96191 Rigid IMC Conduit Locknut Halex 97523 Insulated Conduit Bushing Halex 96071 Knock Out Seals
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96072 Knock Out Seals Halex 96192 Rigid IMC Conduit Locknut Halex 26190 Conduit Locknut
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor
Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut Halex 90701 Conduit Chase Nipple
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 91530 Combination Coupling Halex 90510 Twin Screw Clamp Connector Halex 91321 Reducing Conduit Bushing
Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 96194 Rigid IMC Conduit Locknut Halex 91641 Box Spacer Halex 96510 2-Piece Butterfly Clamp Connector
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required.
Halex 96195 Rigid Conduit Locknut Halex 91331 Reducing Conduit Bushing Halex 16405B Box Spacer
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed.
Halex 90512 Twin Screw Clamp Connector Halex 91332 Reducing Conduit Bushing Halex 64005 Conduit Coupling
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 26071 Knock Out Seals Halex 27511 Hit Lock Cable Connectors Halex 97526 Insulated Conduit Bushing
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 90702 Conduit Chase Nipple Halex 90513 Twin Screw Clamp Connector Halex 20511 Twin Screw Clamp Connector
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
Halex 96401 Conduit Coupling Halex 16407B Box Spacer Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Halex 96196 Rigid IMC Conduit Locknut Halex 90514 Twin Screw Clamp Connector Halex 75225 Insulated Conduit Bushing
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 01925B IMC Conduit Locknut Halex 96402 Conduit Coupling Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Halex 90703 Conduit Chase Nipple Halex 75230 Insulated Conduit Bushing Halex 64010 Conduit Coupling
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Halex 26073 Knock Out Seals Halex Straight Liquid Tight Connector
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved.
Halex 91625 Multi-Piece Liquid Tight Compression Connector Halex 27519 Hit Lock Cable Connectors Halex 16205B Multi-Piece Liquid Tight Conduit Connector
Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 27621 Multi-Piece Liquid Tight Straight Conduit Connector Halex 07012 Conduit Chase Nipple Carlon Carflex LN20EA-CTN Liquidtight Conduit Elbow
Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic.
Halex 64405 Conduit Elbow LOCK NUT SEALER 1/2IN         Halex 26074 Knock Out Seals
LOCK NUT SEALER 1/2IN
Our Price: $3.36
To connect EMT conduit together to allow for 90 degree bends. UL Approved. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 05115 Twin Screw Clamp Connector Halex 64012 Conduit Coupling Halex 94105 Pull Conduit Elbow with Neoprene Gasket
Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed.
Halex 26075 Knock Out Seals Halex 26512 2-Piece Butterfly Clamp Connector Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket
Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 64505 Conduit Elbow Halex 27622 Multi-Piece Liquid Tight Straight Conduit Connector Halex 64507 Conduit Elbow
To connect EMT conduit together to allow for 45 degree bends. Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. To connect EMT conduit together to allow for 45 degree bends.
Halex 07015 Conduit Chase Nipple Halex 61820B IMC Sealer Locknut Halex 59505 Service Entrance Elbow
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Halex Liquid Tight Connector Halex 27691 Liquid Tight Conduit Elbow Halex 16207B Multi-Piece Liquid Tight Conduit Connector
Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 05120 Twin Screw Clamp Connector Halex 04010 Offset Nipple Halex 20510 Twin Screw Clamp Connector
Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
Halex 91627 Multi-Piece Liquid Tight Conduit Connector Halex 64407 Conduit Elbow Halex 64015 Conduit Coupling
Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box, metal enclosure or hub. UL Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket Halex 94107 Pull Conduit Elbow Halex 21642 Box Spacer
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
Halex 20512 Twin Screw Clamp Connector Halex 64105 Conduit Elbow Halex 26076 Knock Out Seals
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 64320 Conduit Nipple Carlon Carflex LN43FA-CAR 1-Piece Straight Conduit Connector Halex 16905B Multi-Piece Liquid Tight Conduit Elbow
Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
Halex 95212B Insulated Metallic Grounding Conduit Bushing with Lug Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket Halex 04012 Offset Nipple
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Halex 91695 Multi-Piece Liquid Tight Conduit Elbow Halex 07020 Conduit Chase Nipple Halex 64107 Conduit Elbow
Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 59507 Service Entrance Elbow Halex 27692 Liquid Tight Conduit Elbow Halex 64410 Conduit Elbow
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Indoors or outdoors, fitting will not rust or corrode. No disassembly required, just hand-tighten nut. Reusable. Use to connect type B non-metallic liquid-tight conduit to a weatherproof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket BUSHING GRND MTL INSUL 1-1/4IN Halex 99526 Insulated Metallic Grounding Conduit Bushing with Lug
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Halex 64020 Conduit Coupling Halex 04015 Offset Nipple Halex 58610 Rigid Threaded Conduit Body with Cover and Gasket
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 95215B Insulated Metallic Grounding Conduit Bushing with Lug Halex 64412 Conduit Elbow Halex 16210B Multi-Piece Liquid Tight Conduit Connector
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 95220B Insulated Metallic Grounding Conduit Bushing with Lug LOCK NUT SEALER 2IN           Halex 59510 Service Entrance Elbow
LOCK NUT SEALER 2IN
Our Price: $8.40
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Secures rigid or IMC conduit, or threaded fittings to steel outlet boxes or other steel boxes where moisture proofing is needed. Steel with zinc plating, pre-molded seal on one side. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Halex 16907B Multi-Piece Liquid Tight Conduit Elbow Halex 91697 Multi-Piece Liquid Tight Conduit Elbow Halex 64110 Conduit Elbow
Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Indoors or outdoors. Multi-piece, use to connect flexible metallic or type B non-metallic liquid-tight conduit to a steel outlet box, metal enclosure or hub. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 29523 Insulated Metallic Grounding Conduit Bushing with Lug Halex 94110 Pull Conduit Elbow with Neoprene Gasket Carlon Carflex LT43G Liquid Tight Straight Conduit Connector
Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic.
Carlon LN20FA-CAR 1-Piece Liquid Tight Conduit Elbow Halex 16210 Multi-Piece Liquid Tight Compression Connector Halex 58810 Rigid Threaded Conduit Body with Cover and Gasket
For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed.
BULB LED R20 45W EQUIV NON-DIM Halex 64415 Conduit Elbow Halex 59512 Service Entrance Elbow
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. To connect EMT conduit together to allow for 90 degree bends. UL Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
LED RTF KIT STD DIM 14W 5000K Halex 04020 Offset Nipple Halex 64025 Conduit Coupling
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
BULB LED GREEN PAR38 REFLECTOR LED PAR38 10.5W/75W MED 3000K LED PAR38 MED BS 7W FLOOD YEL
Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees.
RECESSED RETROFIT BAFFLE 5    LIGHT RTRFT LD DIMM WWHT 5&6IN LIGHT RETRFT LED 4000K 5&6IN
LED Air-Tite retrofit, with Integrated Light Engine and Baffle Trim. Over 600 lumens. 50,000 hours. 3000K, Compatible with 4" standard recessed housings: HALO, ALL-PRO and more. High brightness, diffusing, optical quality lens. Dimmable to 5 percent with select dimmers. Easy installation with universal mounting clips. Wet and damp location listed and IC (Insulated Ceiling) rated. cULus Listed, Energy Star.
Halex 64112 Conduit Elbow Halex 58612 Rigid Threaded Conduit Body with Cover and Gasket AmerTac Westek Strip Extension Kit
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. AmerTac Strip Extension Kit, Series: Westek, 12 V, 1.4 W, LED Lamp, 8000 hr Average Life, Warm White Light, 3000 K Color Temperature, Surface Mounting, Plastic, Includes: Mounting Hardware, UL Listed
BULB LED PAR20 50WATT NON-DIM BULB LED NON-DIMM PAR20 5K 3PK LIGHT RETRFT LD DIMM WWHT 4IN
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
LIGHT RETRFT LED DIMMABLE 4IN LED RTF KIT STD DIM 10W 3000K Halex 16910 Multi-Piece Liquid Tight Conduit Elbow
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Multi-piece, zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed.
RTF KIT STD DIM 9W LED 2700K  Halex 16212B Multi-Piece Liquid Tight Conduit Connector Halex 29525 Insulated Metallic Grounding Conduit Bushing with Lug
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Zinc die cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 degree F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL Listed, CSA Approved.
Halex 75212B Insulated Conduit Bushing Halex 75105B Hit Lock Cable Connectors BULB LED CAN REPLCMT 3000K 5IN
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations.
LIGHT UNDER CABINET 12IN      LIGHT UNDER CABINET 15IN      CONVERSION CAN DIMABL LED 670L
LIGHT UNDER CABINET 12IN
Our Price: $14.98
LIGHT UNDER CABINET 15IN
Our Price: $15.48
Slim line 3/4" profile. Can be used under kitchen cabinets, in display cases, workshops and more. Can be joined together or connected using the included linking cord. 3000K warm white light. Cool to the touch. Small and light-weight in size, but provides a substantial amount of diffused light. Equipped with dimmable LEDs that can be connected to a dimmer switch. In-line on/off switch. 5' power cord, 8" linking cord and mounting hardware included. Provides a warm, diffused light perfect for the home or office. Slim 5/8" profile tucks discreetly underneath cabinets and shelves. For underneath and inside cabinets, display cases, office lighting and work areas. Can be mounted virtually anywhere with a plug in. Simply turn on or off by pressing the attached rocker switch or connect the lights to a dimmer switch to adjust the brightness. Slotted holes allow for easy and seamless mounting directly through the housing. Diffused lens disperses the light to provide maximum coverage. Plug-in design, linkable. 4.7 watts, 420 lumens, 83 CRI, warm (3000K) white light. 5' power cord, 12" linking cord and mounting hardware included. For 5"- 6" existing cans; 7.5" diameter, 5000 K, Dimmable, 50,000 hrs, 670 lumens.
Halex 64115 Conduit Elbow LED RTF KT STD DIM 15W 3000K  Halex 27515 Cable Connectors
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Push-in style with captive locking wedge. Rigid PVC. Superior strain relief and insulation. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 - #10/3. Fits 1/2" knock outs. UL, CSA Listed.
Halex 58615 Rigid Threaded Conduit Body with Cover and Gasket LED12PAR38 FLOOD E26 3K 1100L Halex 64420 Conduit Elbow
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Ultra LED, directional. Dimmable, E26 medium base. 25,000 hours average life. RoHS compliant, contain no mercury, lead or other hazardous materials and emit no UV or IR radiation. To connect EMT conduit together to allow for 90 degree bends. UL Approved.
LIGHT UNDER CABINET 16IN      Halex 16320 Conduit Hubs Halex 16215B Multi-Piece Liquid Tight Conduit Connector
LIGHT UNDER CABINET 16IN
Our Price: $16.66
Slim line 3/4" profile. Can be used under kitchen cabinets, in display cases, workshops and more. Can be joined together or connected using the included linking cord. 3000K warm white light. Cool to the touch. Small and light-weight in size, but provides a substantial amount of diffused light. Equipped with dimmable LEDs that can be connected to a dimmer switch. In-line on/off switch. 5' power cord, 8" linking cord and mounting hardware included. Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat. Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed.
Halex 75215B Insulated Conduit Bushing LIGHT DOWN 4IN 2700K 10W      BULB LED PAR30L 75WATT NON-DIM
LIGHT DOWN 4IN 2700K 10W
Our Price: $18.08
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. LED retrofit kit can be wired or screwed into an E26 existing socket. Dimmable, 2700K, 10 watt, 625 lumens, 90CRI. Rated lifetime of fixture is 50,000 hours, no bulb to replace. IC Rated and Certified Title 24 (T24). UL/cUL-Damp Locations. UV, IR and Mercury-free. E26 with quick disconnect socket. Energy Star. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
MTL BRKT FOR 8FT STRP LT RTOFT LIGHT UNDER CABINET 22IN      LED RETRO MODULE AND TRIM 4IN
LIGHT UNDER CABINET 22IN
Our Price: $18.68
Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures. Slim line 3/4" profile. Can be used under kitchen cabinets, in display cases, workshops and more. Can be joined together or connected using the included linking cord. 3000K warm white light. Cool to the touch. Small and light-weight in size, but provides a substantial amount of diffused light. Equipped with dimmable LEDs that can be connected to a dimmer switch. In-line on/off switch. 5' power cord, 8" linking cord and mounting hardware included. LED Air-Tite retrofit, with Integrated Light Engine and Baffle Trim. Over 600 lumens. 50,000 hours. 3000K, Compatible with 4" standard recessed housings: HALO, ALL-PRO and more. High brightness, diffusing, optical quality lens. Dimmable to 5 percent with select dimmers. Easy installation with universal mounting clips. Wet and damp location listed and IC (Insulated Ceiling) rated. cULus Listed, Energy Star.
Halex 61930 Rigid IMC Conduit Locknut FIXTURE LED 5/6 4000K 650LMS  FIXTURE LED 5/6 2700K 650LMS
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Used in indoor recessed can, high hat in residential, office, retail, restaurant, school, hospital and hotel/motel locations. 40,000 hours average rated life. UV, IR and mercury-free. White. UL/cUL Listed for damp locations. Used in indoor recessed can, high hat in residential, office, retail, restaurant, school, hospital and hotel/motel locations. 40,000 hours average rated life. UV, IR and mercury-free. White. UL/cUL Listed for damp locations.
CONVERSION CAN DIMABL LD 1200L KIT RCSD LED RT4 10YR 3K 50W  Halo RL560WH-R Retrofit Baffle Trim
Retrofit LED downlight. Smooth baffle trim. Designed to fit into 5-6 inch recessed cans. ETL Rated. Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. Comes with a dedicated LED connector for California Title 24 Compliance. For installation into Halo recessed LED housings. Includes an Edison base adapter to accommodate standard screwbase ICAT housings. Can be dimmed with many standard incandescent dimmers, however, an electronic low voltage version of a standard dimmer (with neutral connection) is recommended for many applications. 9.4" W. UL Listed and Classified.
Halex 59515 Service Entrance Elbow BULB LED PAR38 3000K 13W/90W  BULB LED PAR38 5000K 13W/90W
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Medium base, non dimmable, 11000 hours average life. Medium base, non dimmable, 11000 hours average life.
Halex 75205B Insulated Conduit Bushing LIGHT UNDER CABINET 12IN      LIGHT UNDER CABINET 18IN
LIGHT UNDER CABINET 12IN
Our Price: $20.68
LIGHT UNDER CABINET 18IN
Our Price: $21.21
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Provides a warm, diffused light for the home or office. With simple on/off operation and easy plug-in installation. Use underneath and inside cabinets, display cases, office lighting and work areas, can be mounted virtually anywhere there is an outlet. Mounting holes are built into the backside of the housing, no need for mounting brackets. The diffused lens disperses the light to provide maximum coverage and the dimmable LEDs allow these lights to be connected to a dimmer switch to adjust the brightness. Warm (3000K) white light. 5' power cord and mounting hardware included. Provides a warm, diffused light for the home or office. With simple on/off operation and easy plug-in installation. Use underneath and inside cabinets, display cases, office lighting and work areas, can be mounted virtually anywhere there is an outlet. Mounting holes are built into the backside of the housing, no need for mounting brackets. The diffused lens disperses the light to provide maximum coverage and the dimmable LEDs allow these lights to be connected to a dimmer switch to adjust the brightness. Warm (3000K) white light. 5' power cord and mounting hardware included.
Halex 04005B Offset Nipple Halex 61925 Rigid IMC Conduit Locknut Halex 64120 Conduit Elbow
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 16220B Multi-Piece Liquid Tight Conduit Connector Halex 05112B Twin Screw Clamp Connector Halex 05103B Twin Screw Clamp Connector
Multi-piece. Zinc die cast. Use to connect liquid-tight conduit to a steel outlet box or other metal enclosure or hub. UL Listed. Bulk packed. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
AmerTac Westek Strip Light LIGHT UNDERCBNT LED PLUG 18IN Halex 58620 Rigid Threaded Conduit Body with Cover and Gasket
AmerTac Strip Light, Series: Westek, 12 V, 3.9 W, LED Lamp, 47 lumens, 8000 hr Average Life, Warm White Light, 3000 K Color Temperature, Surface Mounting, Plastic, Includes: Mounting Hardware, Metal Brackets and Tape Strips, UL Listed Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 59520 Service Entrance Elbow Halex 75220B Insulated Conduit Bushing Halex 75210B Insulated Conduit Bushing
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
STRIPLIGHT 1L LED 1050L 4K 2FT DOWNLIGHT 4IN LED CCT 10W     DOWNLIGHT 5/6IN LED CCT 11W
DOWNLIGHT 4IN LED CCT 10W
Our Price: $26.66
LED downlight comes with color preference feature that allows manual selection between 3 light colors -2700K(soft white), 3000K(warm white), 4000K(bright white). Replacement for recessed can upgrade to LED technology. Comes with both 2 torsion springs and 2 pressure clamps for use with types of recessed cans. 120 volt, 90 CRI. 50,000 hours rated life. Instant start down to -4 degrees F. Energy Star and cUL certified. LED downlight comes with color preference feature that allows manual selection between 3 light colors -2700K(soft white), 3000K(warm white), 4000K(bright white). Replacement for recessed can upgrade to LED technology. Comes with both 2 torsion springs and 2 pressure clamps for use with types of recessed cans. 120 volt, 90 CRI. 50,000 hours rated life. Instant start down to -4 degrees F. Energy Star and cUL certified.
Halex 75207B Insulated Conduit Bushing Good Earth Lighting UC1011-WHG-16LFOE Slim Line Led Bar LIGHT UNDER CABINET 12IN
LIGHT UNDER CABINET 12IN
Our Price: $27.32
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Plug In under cabinet bar. White fixture and diffuser. Lamps included, plug in, and damp location. Inline switch included. 16" x 1.5" x 0.6". Slim 5/8" profile tucks discreetly underneath cabinets and shelves. Can be mounted virtually anywhere with a plug in. Simply turn on or off by pressing the attached rocker switch or connect the lights to a dimmer switch to adjust the brightness. Cool-to-the-touch operation. Diffused lens disperses the light to provide maximum coverage. Aluminum housing, diffused lens, linkable. Warm (3000K) white light. 5' power cord, 12" linking cord and mounting hardware included.
Halex 05110B Twin Screw Clamp Connector BULB LED RT4G 27K 9W/50W      BULB LED RT4G 3K 9W/50W
BULB LED RT4G 27K 9W/50W
Our Price: $28.78
BULB LED RT4G 3K 9W/50W
Our Price: $28.78
Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life.
TUBE LED U BEND 6IN15W 1800LMS LIGHT DOWN 5/6IN 20W 3000K    LIGHT UNDER CABINET 24IN
LIGHT UNDER CABINET 24IN
Our Price: $28.96
Non-dimmable, 15 watt, 120-277 VAC, 1800 lumens, 4000K, 50,000 hours rated lifetime. UL/cUL-Damp Locations, RoHS complaint, UV, IR and Mercury-free. Not for use on instant start fixtures. Fixture must be rewired. LED retrofit kit can be wired or screwed into an E26 existing socket. Triac dimmable, 3000K, 18W, 1300 lumens, 120V. CRI 90. Rated lifetime of fixture is 50,000 hours, no bulb to replace. Certified Title 24 (T24). IC Rated for direct contact with insulation. UL/cUL- Damp Locations. UV, IR and Mercury-free. Energy Star. Provides a warm, diffused light for the home or office. With simple on/off operation and easy plug-in installation. Use underneath and inside cabinets, display cases, office lighting and work areas, can be mounted virtually anywhere there is an outlet. Mounting holes are built into the backside of the housing, no need for mounting brackets. The diffused lens disperses the light to provide maximum coverage and the dimmable LEDs allow these lights to be connected to a dimmer switch to adjust the brightness. Warm (3000K) white light. 5' power cord and mounting hardware included.
Halex 61912B Rigid IMC Conduit Locknut Halex 61907B Rigid IMC Conduit Locknut Halex 04007B Offset Nipple
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
LIGHT UNDER CABINET 16IN      Feit PAR38/R/LEDG5 Non-Dimmable LED Lamp LED BAR 12IN DIRECT 350L DIMM
LIGHT UNDER CABINET 16IN
Our Price: $30.42
Slim 5/8" profile tucks discreetly underneath cabinets and shelves. Can be mounted virtually anywhere with a plug in. Simply turn on or off by pressing the attached rocker switch or connect the lights to a dimmer switch to adjust the brightness. Cool-to-the-touch operation. Diffused lens disperses the light to provide maximum coverage. Aluminum housing, diffused lens, linkable. Warm (3000K) white light. 5' power cord, 12" linking cord and mounting hardware included. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. LED direct wire under cabinet bar. Damp location. 50,000 average life hours. On/off rocker switch. Clear frosted diffuser. Lamps included. cETLus Listed, Energy Star.
BULB LED LIGHT DISK 3K 13/75W Halex 05107B Twin Screw Clamp Connector BULB LED SMART RETRO 5/6IN KIT
Ultra LED recessed and surface mount downlight kit. 50,000 hour average life. Medium base socket adaptor included. Integrated white trim. Wet rated for indoor/outdoor applications. E26 base, 82 CRI, 13 watt, 120 volt. Replaces up to 120 watt incandescent. LED downlight kit. For new construction and retrofit applications, recessed and surface mount applications, in most standard four-inch, five-inch and six-inch insulated ceiling (IC) housings, airtight (AT) housings and non-IC housings. It can also be surface mounted to a standard 4-inch J-Box or specially designed connector box. Dimmable to 20 percent with standard 120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. 120 degree beam angle with low glare. Complies with cULus wet location, ceiling only (shower rated), and damp location listed ceiling and wall. Energy Star. RoHS compliant, cETLus Listed. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Used for recessed lighting. Energy efficient LED retrofit kit, compatible with most 5 in. and 6 in. recessed cans. They are easy to install, dimmable and last up to 50,000 hours. Each kit comes with a standard base adapter and a pre-mounted trim. Soft white and dimmable via the HomeBrite app. 110 degree beam spread, 880 lumens, 50,000 life hours, 3000K. 7.4"H x 3.3"D. 75 watt equivalent using 14 watts. Controlled using a smart device, no extra hardware needed.
LED RETRO GIMBAL 4IN TILT     STRIP LGT 2LT LED 2100L 4K 2FT LIGHT STRIP 2FT LINK LED 10W
LED RETRO GIMBAL 4IN TILT
Our Price: $33.73
Compatible with most recessed housings. Flexible mounting. Over 600 lumens; 50,000 hours. 3000K. 35 degrees tilt up to 360 degrees rotation. Dimmable to 5 percent with select dimmers. Adjustable Gimbal for accent, task, grazing and downlighting. Easy installation with mounting clips. Damp location listed and IC (insulated ceiling) rated. Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations.
KIT RCSD LED RT4 3K 65W       Halex 64125 Conduit Elbow Halex 05703B Combination Clamp Connector
Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
KIT RCSD LED RT56 10YR 3K 65W KIT RCSD LED RT56 10YR 4K 65W KIT RCSD LED RT56 10YR 5K 65W
Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt.
Halex 61915B Rigid IMC Conduit Locknut LIGHT UNDER CABINET 22IN      KIT RECESSED LED RT56 3K 65W
LIGHT UNDER CABINET 22IN
Our Price: $35.81
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Slim 5/8" profile tucks discreetly underneath cabinets and shelves. Can be mounted virtually anywhere with a plug in. Simply turn on or off by pressing the attached rocker switch or connect the lights to a dimmer switch to adjust the brightness. Cool-to-the-touch operation. Diffused lens disperses the light to provide maximum coverage. Aluminum housing, diffused lens, linkable. Warm (3000K) white light. 5' power cord, 12" linking cord and mounting hardware included. LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations.
KIT RECESSED LED RT56 4K 65W