Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS
Choose a sub category:
NON METALLIC CABLE CONNECTORS BX / FLEX CONDUIT FITTINGS EMT METAL CONDUIT FITTINGS
RIGID CONDUIT FITTINGS LIQUID TIGHT CONDUIT FITTINGS METAL CONDUIT ACCESSORIES
PVC CONDUIT FITTINGS SERVICE ENTRANCE FITTINGS GROUNDING RODS/CLAMPS
PLASTIC FLEXIBLE FITTINGS CONDUIT STRAPS WASHERS / REDUCERS
METAL CONDUIT SUPPORT
Sort By:
1
Carlon E940D-CTN Standard Conduit Coupling Carlon E943D-CTN Terminal Adapter Halex 97521 Insulated Conduit Bushing
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E940E-CTN/CAR Standard Conduit Coupling Carlon E942DR-CTN Conduit Adapter Halex 71205B 2-Hole Conduit Strap
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Carlon E942ER-CTN Conduit Adapter Carlon E940FR-CTN Standard Conduit Coupling Carlon E943E-CTN Terminal Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 61612B 2-Hole Snap-On Conduit Strap Halex 97522 Insulated Conduit Bushing Carlon E943FR-CTN Terminal Adapter
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 71210B 2-Hole Conduit Strap Halex 96163 2-Hole Snap-On Conduit Strap Halex 97525 Insulated Conduit Bushing
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 71212B 2-Hole Conduit Strap Carlon E996DR-CTN Conduit Box Adapter Carlon Snap Strap E978DC-CAR 1-Hole Single Conduit Strap
Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. For PVC enclosures. cULus Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings.
Carlon E940GR-CTN Standard Conduit Coupling Halex 71215B 2-Hole Conduit Strap Halex 96191 Rigid IMC Conduit Locknut
Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Carlon E942FR-CTN Conduit Adapter Carlon UA9ADB-CTN Standard Radius Rigid Conduit Elbow Carlon E996ER-CTN Conduit Box Adapter
Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. For PVC enclosures. cULus Listed.
Carlon Snap Strap E978EC-CAR 1-Hole Single Conduit Strap Halex 90440 Screw-In Connector Halex 96071 Knock Out Seals
Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures.
Halex 96821 Rigid Reducing Conduit Washer Halex 96072 Knock Out Seals Carlon UA9ADR-CTN Standard Radius Conduit Elbow
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 61220B 2-Hole Conduit Strap Halex 97523 Insulated Conduit Bushing Carlon E940HR-CTN Standard Conduit Coupling
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed.
Halex 96111 1-Hole Conduit Strap Carlon E943GR-CTN Terminal Adapter Halex 96831 Rigid Reducing Conduit Washer
Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96832 Rigid Reducing Conduit Washer Carlon UA7ADB-CTN Standard Radius Conduit Elbow Halex 91211 Concrete Tight Set Screw Connector
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Carlon A240D-CAR 1-Piece Conduit Coupling Carlon UA9AER-CTN Standard Radius Conduit Elbow Halex 96192 Rigid IMC Conduit Locknut
Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 26190 Conduit Locknut Halex 97524 Insulated Conduit Bushing Halex 96193 Rigid Conduit Locknut
Halex Conduit Locknut, 1/2 in Nominal, Steel, Zinc Plated, CSA Certified, UL Listed, For use to secure rigid, imc conduit or various threaded fittings to a steel outlet box or other metal enclosure, indoor/outdoor High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure.
Halex 91221 Concrete Tight Set Screw Coupling Halex 90441 Screw-In Connector Halex 90701 Conduit Chase Nipple
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Carlon UA7ADR-CAR Standard Radius Conduit Elbow Carlon E943HR-CTN Terminal Adapter Halex 90451 Screw-In Coupling
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Carlon UA9AEB-CTN Standard Radius Rigid Conduit Elbow Carlon E942GR-CTN Conduit Adapter Thomas & Betts E950ED-CTN Reducing Bushing
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 96560 Beam Clamp Carlon A243D-CAR 1-Piece Snap-In Conduit Adapter Halex 71220B 2-Hole Conduit Strap
Use to secure conduit to a metal beam. Clamps on beam, girder or similar structure to provide a mounting base for attachment of a conduit hanger, either directly or by means of a threaded rod. Eliminates need to drill hole through beam. Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT. Indoor or outdoor applications. Use to secure PVC conduit to wood, masonry or similar surface. Bulk packed.
Halex 96121 2-Hole Conduit Strap Halex 96151 1-Hole Snap-On Conduit Strap Halex 90510 Twin Screw Clamp Connector
Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
Carlon A253E-CAR 1-Piece Snap-In Terminal Adapter Carlon Snap Strap E978FC-CAR 1-Hole Single Conduit Strap Carlon UA7AER-CAR Standard Radius Conduit Elbow
Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. Safe, non-conductive. To be used in accordance with NEC, Article 347.8 conduit spacing requirements. For use with Schedule 40/80 non-metallic solvent weld fittings. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Halex 96161 2-Hole Snap-On Conduit Strap Carlon E940JR-CTN Standard Conduit Coupling Carlon E942HR Conduit Adapter
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode.
Thomas & Betts E977DC-CTN 2-Hole Conduit Clamp Halex 96112 1-Hole Conduit Strap Halex 91530 Combination Coupling
Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. Use to secure Rigid or I.M.C. conduit to wood, masonry or similar surfaces. Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved.
Halex 90580 Cable Connector Halex 91321 Reducing Conduit Bushing Carlon UA7AEB-CTN Standard Radius Conduit Elbow
Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon A253D-CAR 1-Piece Snap-In Terminal Adapter Halex 96780 Conduit Hanger Halex 96213 1-Hole Cable Strap
Fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Steel, use to secure BX cable to wood, masonry or similar surface.
WASHER RDUCNG RGD 1-1/4X1/2IN WASHER RDUCNG RGD 1-1/4X3/4IN Halex 91212 Concrete Tight Set Screw Connector
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 96194 Rigid IMC Conduit Locknut Halex 90481 Concrete Tight Set Screw Connector Halex 96122 2-Hole Conduit Strap
Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 96781 Conduit Hanger Halex 91222 Concrete Tight Set Screw Coupling Carlon A240E-CAR 1-Piece Conduit Coupling
Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Quick connect, fold and snap together. No cement, set screws or lock nuts. For 600 volt use in ceilings, floors and walls in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. Concrete tight when used with Carlon ENT. UL Listed.
Carlon UA9AFR-CTN Standard Radius Conduit Elbow Thomas & Betts E977EC-CTN 2-Hole Conduit Clamp Carlon E943JRR Terminal Adapter
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance.
Halex 91641 Box Spacer Carlon A243E-CAR 1-Piece Snap-In Conduit Adapter Halex 90570 Combination Clamp Connector
Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Innovative one piece quick connect design for fast and easy installation. Suitable for damp locations. No glue or cement needed. Carlon Standard Blue. Concrete tight when used with appropriate ENT. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Halex 96510 2-Piece Butterfly Clamp Connector WASHER RDUCNG RGD 1-1/2X1/2IN WASHER RDUCING RGD 1-1/2X3/4IN
Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved. Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL Listed, CSA Approved.
Halex 96162 2-Hole Snap-On Conduit Strap Carlon E942JR Conduit Adapter Carlon UA7AFR-CAR Standard Radius Conduit Elbow
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. Safe, non-conductive. For adapting Schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Female threads one end, socket end on the other. Will not rust or corrode. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon UA9AFB-CTN Standard Radius Conduit Elbow STRAP CBL 1HOLE SRVC ENT      Halex 12110 Concrete Tight Set Screw Connector
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90442 Screw-In Connector Halex 90512 Twin Screw Clamp Connector Halex 96152 1-Hole Snap-On Conduit Strap
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Indoor or outdoor applications. To support EMT conduit.
Halex 91100 Conduit Elbow Halex 96195 Rigid Conduit Locknut Halex 26155 1-Hole Snap-On Conduit Strap
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Indoor or outdoor applications. To support EMT conduit.
Halex 91331 Reducing Conduit Bushing Halex 26071 Knock Out Seals Halex 90420 Squeeze Connector
Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 16405B Box Spacer Halex 65705B Snap-In Cable Connector Halex 91332 Reducing Conduit Bushing
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Carlon UA7AFB-CTN Standard Radius Conduit Elbow Halex 26211 1-Hole Conduit Strap Thomas & Betts E994DR-CTN Conduit Offset
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Steel, use to secure BX cable to wood, masonry or similar surface. Non-conductive. Will not rust or corrode.
Halex 12210B Concrete Tight Set Screw Coupling Thomas And Betts Z703 1/2-25 Superstrut Halex 61225 2-Hole Conduit Strap
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 26210 1-Hole Service Entrance Strap Halex 64005 Conduit Coupling Halex 26165 2-Hole Snap-On Conduit Strap
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 27511 Hit Lock Cable Connectors Halex 90421 Squeeze Connector Halex 97526 Insulated Conduit Bushing
Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Carlon E950FD-CAR Reducing Conduit Bushing Halex 75403 Anti-Short Conduit Bushing Carlon UA9AGR-CTN Standard Radius Conduit Elbow
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Carlon UA7AGR-CAR Standard Radius Conduit Elbow Carlon E940K-CTN Conduit Coupling Halex 26153 1-Hole Snap-On Conduit Strap
For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Indoor or outdoor applications. To support EMT conduit.
Halex 90702 Conduit Chase Nipple CONNECTOR DPLX FLX N-MTL 3/8IN Halex 16010B Ground Clamp
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG.
Halex 20511 Twin Screw Clamp Connector Halex 91531 Combination Coupling Halex 90513 Twin Screw Clamp Connector
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Superstrut 200 Series Angle Bracket Fitting Thomas And Betts Z703 3/4-25 Superstrut Halex 26125 2-Hole Conduit Strap
For use in metal framing applications. Manufactured from hot rolled carbon steel. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Halex 90422 Squeeze Connector Halex 91101 Conduit Elbow Halex 96401 Conduit Coupling
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Thomas & Betts E950FE-CTN Reducing Bushing Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Halex 16407B Box Spacer Carlon E943K-CTN Terminal Adapter Thomas And Betts Z703 1 1/4-10 Superstrut
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Safe, non-conductive. For adapting schedule 40 non-metallic conduit to boxes, threaded fittings, metallic systems. Male threads on one end, socket end on the other. Will not rust or corrode. UL Listed, RoHS Compliance. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Superstrut 200 Flat Straight Bracket Splice Plate 7-1/4 in L Halex 26163 2-Hole Snap-On Conduit Strap Carlon UA7AGB-CAR Standard Radius Conduit Elbow
Splices and supports conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Gardner Bender GGS-1512R Ground Screw Halex 26126 2-Hole Conduit Strap Thomas And Betts Z703 1-25
Green round washer head screw for switch and outlet boxes. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Carlon LN43DA-CTN Liquidtight Straight Angle Conduit Connector Halex 96196 Rigid IMC Conduit Locknut Carlon E977LC-CAR Conduit Clamp
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Steel with zinc plating. Indoor or outdoor applications. Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit.
Thomas And Betts Z702 21/2EG-10 Superstrut Pipe Clamp Halex 90514 Twin Screw Clamp Connector Thomas & Betts E994ER-CTN Conduit Offset
Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Non-conductive. Will not rust or corrode.
STRAP CBL 1HOLE OVAL SRVC ENT Thomas & Betts E977FC-CTN 2-Hole Conduit Clamp Halex 26154 1-Hole Snap-On Conduit Strap
Indoors or outdoors. Steel, use to secure service entrance cable (SEU, SER) to wood, masonry or similar surface. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. Indoor or outdoor applications. To support EMT conduit.
Halex 75400 Anti-Short Conduit Bushing Thomas And Betts Z500-25 Superstrut Beam Clamp Carlon UA9AH-CAR Standard Radius Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. For hanging rod, silver electroplated finish. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Superstrut 200 Series Angle Bracket Fitting Halex 21210 Concrete Tight Set Screw Connector Thomas And Betts Z703 1 1/2-10 Superstrut
For use in metal framing applications. Manufactured from hot rolled carbon steel. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Gold-galvanized corrosion free finish.
Halex 75225 Insulated Conduit Bushing Halex 26156 1-Hole Snap-On Conduit Strap Carlon UA7AHR-CTN Standard Radius Conduit Elbow
High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved. Indoor or outdoor applications. To support EMT conduit. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297.
Carlon E985D-CTN Rigid Conduit Body Carlon E984D-CTN Rigid Conduit Body Halex 26166 2-Hole Snap-On Conduit Strap
For easy access and pulling of wires through conduit run. Textured lid, foam-in-place gasket. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 01925B IMC Conduit Locknut Eritech CP58 Acorn Standard Duty Ground Clamp Carlon UB9AD-CAR Standard Radius Conduit Elbow
Use to secure Rigid or IMC conduit or various threaded fittings to a steel outlet box or other metal enclosure. Bulk packed. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant.
Halex 96402 Conduit Coupling Thomas & Betts E986D-CTN Type LB Rigid/IMC Conduit Body Gardner Bender GCC-310 2-Hole Conduit Strap
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Rigid non-metallic Type LB conduit body. For easy access and pulling of wires through conduit run. For use with Schedule 40 non-metallic solvent weld fittings. Will not rust or corrode. With textured lid and foam-in-place gasket. Hubs are not threaded. UL Listed, RoHS Compliance. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 90452 Screw-In Coupling Carlon E940LR/CTN Conduit Coupling Halex 90661 Standard Water-Tight Connector
Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Safe, non-conductive. Schedule 40 non-metallic socket type coupling for joining Schedule 40 non-metallic conduit. Will not rust or corrode. RoHS Compliance, UL Listed. Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub.
Halex 12112 Concrete Tight Set Screw Connector Thomas And Betts Z702 3EG-10 Superstrut Halex 11005B Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Pipe straps hold conduit and pipes in channel. They are inserted along the slot side of the channel and twisted into place. Pre-assembled with locking slot / hex head bolt. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 93591 Ground Clamp Halex 67860 Conduit Hanger Carlon E950GE-CAR Reducing Conduit Bushing
Connects grounding wire to the grounding rod. Use to secure and suspend conduit from overhead supports. Comes with a nut and bolt. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Gardner Bender GGC-1508 Ground Clip Eritech ZWP1J Grounding Pipe Clamp Halex 61230 2-Hole Conduit Strap
For aluminum or copper grounding wire zinc plated. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. Indoor or outdoor use. Use to secure Rigid or IMC conduit to wood, masonry or similar surfaces where greater load bearing is required. UL Listed, CSA Approved.
Carlon LN43EA-CTN Liquidtight Straight Angle Conduit Connector Halex 90703 Conduit Chase Nipple Thomas & Betts E950GF-CTN Reducing Bushing
For flexible conduit. Non-metallic/non-conductive, corrosion resistant plastic. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode.
Halex 03707B Concrete Tight Set Screw Conduit Offset Carlon UA9AGB-CTN Standard Radius Conduit Elbow Halex 12212 Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. Schedule 40. UL 651 Listed to the NEC by the ETL, UL Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Carlon E987D-CTN Rigid Conduit Body Thomas & Betts E977GC-CTN 2-Hole Conduit Clamp Halex 26164 2-Hole Snap-On Conduit Strap
For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode. UL Listed. Offers same chemical resistance as Carlon nonmetallic conduit for a complete, corrosion resistant system. UV resistant for use in direct sunlight. Use in accordance with conduit spacing requirements per NEC. Each clamp requires 2 screws, 2 nuts, and 2 washers. Gray clamps for standard conduit. To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Halex 20581 Cable Connector Halex 26073 Knock Out Seals Halex 75230 Insulated Conduit Bushing
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. High impact thermoplastic. Flame retardant to 105 degrees C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL Listed, CSA Approved.
Halex 90662 Standard Water-Tight Connector Carlon UA7AHB-CAR Standard Radius Conduit Elbow Carlon E983D-CTN Rigid IMC Conduit Body
Die cast of high strength zinc alloy. Use to secure SE/SEU cable to a metal enclosure. Use to connect UF cable to a waterproof box with a threaded hub. For use with nonmetallic solvent weld fittings. Nonconductive, impact, corrosion and sunlight resistant. UL Listed E35297. For easy access and pulling of wires through conduit run. For use with Schedule 40/80 non-metallic solvent weld fittings. Will not rust or corrode.
Thomas & Betts E950HGR Reducing Bushing Gardner Bender GGP-1502 Grounding Pigtail Halex 75401 Anti-Short Conduit Bushing
For connecting different sizes of conduit. Socket both ends, for reducing male Schedule 40/80 conduit runs or fittings to female. Non-conductive. Will not rust or corrode. AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Halex 64010 Conduit Coupling Carlon Carflex LN20DA-CTN Liquidtight Conduit Elbow Gardner Bender GCC-410 2-Hole Conduit Strap
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. For flexible conduit. Non-metallic, Non-conductive, corrosion resistant plastic. Heavy-duty polyethylene, resists deterioration from UV rays and breakage from extreme cold. Enables secure fastening of plastic electrical conduit, schedule 40 PVC, copper tubing.
Halex 90372 Concrete Tight Set Screw Conduit Offset Halex 91102 Pull Conduit Elbow Carlon UA9AHB-CTN Standard Radius Rigid Conduit Elbow