Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL WIRE > SPECIALTY WIRE
Sort By:
1
Halex 91211 Concrete Tight Set Screw Connector Halex 90701 Conduit Chase Nipple Halex 91221 Concrete Tight Set Screw Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 91321 Reducing Conduit Bushing Halex 91212 Concrete Tight Set Screw Connector Halex 91641 Box Spacer
Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed.
Halex 90211 Compression Connector Halex 91222 Concrete Tight Set Screw Coupling Halex 91331 Reducing Conduit Bushing
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 16405B Box Spacer Halex 12110 Concrete Tight Set Screw Connector Halex 91332 Reducing Conduit Bushing
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL Approved.
Halex 64005 Conduit Coupling Halex 90221 Concrete Tight Compression Coupling Halex 90212 Concrete Tight Rain Tight Compression Connector
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 12210B Concrete Tight Set Screw Coupling Halex 90702 Conduit Chase Nipple Halex 90222 Concrete Tight Compression Coupling
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 96401 Conduit Coupling Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Halex 16407B Box Spacer Halex 02110 Compression Connector Halex 90401 Offset Nipple
Zinc die cast. Use as a raceway between two steel outlet boxes or other metal enclosures. UL Listed. Bulk packed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Halex 96402 Conduit Coupling Halex 12112 Concrete Tight Set Screw Connector Halex 21210 Concrete Tight Set Screw Connector
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90703 Conduit Chase Nipple Halex 03707B Concrete Tight Set Screw Conduit Offset Halex 12212 Concrete Tight Set Screw Coupling
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 02210 Concrete Tight Compression Coupling Halex 64010 Conduit Coupling Halex 90372 Concrete Tight Set Screw Conduit Offset
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Halex 02905B Compression Conduit Elbow Halex 90402 Offset Nipple Halex 07012 Conduit Chase Nipple
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Cooper BP45FS2 All Purpose Fluorescent Starter Halex 12215 Concrete Tight Set Screw Coupling Cooper BP45-FS4 All Purpose Fluorescent Starter
All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs.
Halex 14405 Pull Conduit Elbow Halex 12115 Concrete Tight Set Screw Connector Halex 64012 Conduit Coupling
Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Halex 02112 Compression Connector Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Halex 94105 Pull Conduit Elbow with Neoprene Gasket Halex 21212 Concrete Tight Set Screw Connector Halex 02212 Concrete Tight Compression Coupling
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 58305 Rigid Threaded Conduit Body with Cover and Gasket Halex 58405 Rigid Threaded Conduit Body with Cover and Gasket Halex 58605 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 12120 Concrete Tight Set Screw Connector Halex 58905 Rigid Threaded Conduit Body with Cover and Gasket Halex 14407 Pull Conduit Elbow
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Halex 07015 Conduit Chase Nipple Halex 12220 Concrete Tight Set Screw Coupling Halex 59505 Service Entrance Elbow
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Halex 04010 Offset Nipple Halex 02115 Compression Connector Halex 20210 Concrete Tight Compression Connector
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 64015 Conduit Coupling Halex 58805 Rigid Threaded Conduit Body with Cover and Gasket Halex 94107 Pull Conduit Elbow
Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed.
Halex 21642 Box Spacer Halex 21222 Concrete Tight Set Screw Coupling Halex 64105 Conduit Elbow
Die cast of high strength corrosion resistant zinc alloy. Locknut is reversible. It is designed to cut through protective coatings on boxes and enclosures to assure ground continuity. Use as a raceway between two steel outlet boxes or other metal enclosures. UL and CSA Listed. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 14605 Inside Corner Pull Conduit Elbow Halex 21211 Concrete Tight Set Screw Connector Halex 64320 Conduit Nipple
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Made of steel, fully threaded. Indoor or outdoor. Use to connect two steel outlet boxes or other metal enclosures or to extend a length of threaded Rigid or IMC conduit. Bulk packed.
Halex 21221 Concrete Tight Set Screw Coupling Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 58907 Rigid Threaded Conduit Body with Cover and Gasket Halex 04012 Offset Nipple Halex 58607 Rigid Threaded Conduit Body with Cover and Gasket
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
Halex 58307 Rigid Threaded Conduit Body with Cover and Gasket Halex 58407 Rigid Threaded Conduit Body with Cover and Gasket Halex 07020 Conduit Chase Nipple
Aluminum, indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Halex 64107 Conduit Elbow Halex 20221 Concrete Tight Compression Coupling Halex 59507 Service Entrance Elbow
Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed.
Halex 58807 Rigid Threaded Conduit Body with Cover and Gasket Halex 20212 Concrete Tight Compression Connector Halex 02220 Concrete Tight Compression Coupling
Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 14607 Inside Corner Pull Conduit Elbow Halex 64020 Conduit Coupling Halex 20222 Concrete Tight Compression Coupling
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 04015 Offset Nipple Halex 58610 Rigid Threaded Conduit Body with Cover and Gasket Halex 58705 EMT Set Screw Conduit Body with Cover and Gasket
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed.
Philips Comp-Covered LC1420CI Magnetic Ballast Halex 59510 Service Entrance Elbow Halex 64110 Conduit Elbow
For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 94110 Pull Conduit Elbow with Neoprene Gasket Halex 58810 Rigid Threaded Conduit Body with Cover and Gasket BULB LED R20 45W EQUIV NON-DIM
Zinc die cast. Indoors or outdoors. Use as a wire pulling elbow to facilitate wire pulling through a sharp bend in a run of threaded Rigid or IMC conduit. Removable cover provides easy access to wiring. UL Approved. Bulk packed. Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. UL Approved. Tray boxed. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
Halex 59512 Service Entrance Elbow Zenith AS110024C Speaker Wire LED PAR38 10.5W/75W MED 3000K
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
LED RTF KIT STD DIM 14W 5000K Halex 04020 Offset Nipple Halex 64025 Conduit Coupling
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL Listed.
Zenith AS105018C Speaker Wire RECESSED RETROFIT BAFFLE 5    LIGHT RTRFT LD DIMM WWHT 5&6IN
Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. LED Air-Tite retrofit, with Integrated Light Engine and Baffle Trim. Over 600 lumens. 50,000 hours. 3000K, Compatible with 4" standard recessed housings: HALO, ALL-PRO and more. High brightness, diffusing, optical quality lens. Dimmable to 5 percent with select dimmers. Easy installation with universal mounting clips. Wet and damp location listed and IC (Insulated Ceiling) rated. cULus Listed, Energy Star.
LIGHT RETRFT LED 4000K 5&6IN  Feit FS5/10 Fluorescent Starter with Condenser Feit FS2/10 Fluorescent Starter with Condenser
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser.
Feit FS4/10 Fluorescent Starter with Condenser Feit FS22/10 Fluorescent Starter with Condenser Halex 64112 Conduit Elbow
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
Halex 21220 Concrete Tight Set Screw Coupling Halex 12207B Concrete Tight Set Screw Coupling Halex 58612 Rigid Threaded Conduit Body with Cover and Gasket
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
BULB LED PAR20 50WATT NON-DIM BULB LED NON-DIMM PAR20 5K 3PK Zenith AS105016C Speaker Wire
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier.
LIGHT RETRFT LD DIMM WWHT 4IN LIGHT RETRFT LED DIMMABLE 4IN LED RTF KIT STD DIM 10W 3000K
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed.
RTF KIT STD DIM 9W LED 2700K  BULB LED CAN REPLCMT 3000K 5IN Halex 12205B Concrete Tight Set Screw Coupling
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
BULB LED SMART 60W A19 GLOBE  CONVERSION CAN DIMABL LED 670L Halex 64115 Conduit Elbow
Soft white and dimmable via the HomeBrite app. 300 degree beam spread, 800 lumens, 25,000 life hours, 2700K. 4.8"H x 2.35"D. 60 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. For 5"- 6" existing cans; 7.5" diameter, 5000 K, Dimmable, 50,000 hrs, 670 lumens. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed.
LED RTF KT STD DIM 15W 3000K  Zenith AS110018C Speaker Wire Halex 58615 Rigid Threaded Conduit Body with Cover and Gasket
Performance LED recessed lighting retrofit kit. Comes with a standard base adapter and a pre-mounted trim. Instant on to full brightness. Indoor, suitable for damp locations. For use with air tight, IC or non-IC fixtures. UL/CUL Listed. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
LED12PAR38 FLOOD E26 3K 1100L Halex 16320 Conduit Hubs LIGHT DOWN 4IN 2700K 10W
LIGHT DOWN 4IN 2700K 10W
Our Price: $18.08
Ultra LED, directional. Dimmable, E26 medium base. 25,000 hours average life. RoHS compliant, contain no mercury, lead or other hazardous materials and emit no UV or IR radiation. Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat. LED retrofit kit can be wired or screwed into an E26 existing socket. Dimmable, 2700K, 10 watt, 625 lumens, 90CRI. Rated lifetime of fixture is 50,000 hours, no bulb to replace. IC Rated and Certified Title 24 (T24). UL/cUL-Damp Locations. UV, IR and Mercury-free. E26 with quick disconnect socket. Energy Star.
BULB LED PAR30L 75WATT NON-DIM BULB LED SMRT BENT TIPCANDLABR LED RETRO MODULE AND TRIM 4IN
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Flame tip bulb shape. 200 degree beam spread, 300 lumens, 25,000 life hours, 2700K. Dimmable with smart device app. 4.85"H x 1.65"D. 40 watt equivalent using 4.5 watts. Candelabra E12 base. Controlled using a smart device, no extra hardware needed. LED Air-Tite retrofit, with Integrated Light Engine and Baffle Trim. Over 600 lumens. 50,000 hours. 3000K, Compatible with 4" standard recessed housings: HALO, ALL-PRO and more. High brightness, diffusing, optical quality lens. Dimmable to 5 percent with select dimmers. Easy installation with universal mounting clips. Wet and damp location listed and IC (Insulated Ceiling) rated. cULus Listed, Energy Star.
Philips Centium ICN2P32N35I Electronic Ballast FIXTURE LED 5/6 4000K 650LMS  FIXTURE LED 5/6 2700K 650LMS
For use with 1 or 2 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except F32T8/ES 60 degrees). UL and CSA Listed. Used in indoor recessed can, high hat in residential, office, retail, restaurant, school, hospital and hotel/motel locations. 40,000 hours average rated life. UV, IR and mercury-free. White. UL/cUL Listed for damp locations. Used in indoor recessed can, high hat in residential, office, retail, restaurant, school, hospital and hotel/motel locations. 40,000 hours average rated life. UV, IR and mercury-free. White. UL/cUL Listed for damp locations.
CONVERSION CAN DIMABL LD 1200L Philips Centium ICN2S40N Electronic Ballast Zenith AS105014C Speaker Wire
Retrofit LED downlight. Smooth baffle trim. Designed to fit into 5-6 inch recessed cans. ETL Rated. For use with one or two F30T12, F34T12 or F40T12 bulbs. Minimum start temperature 50 degrees. 120-277 volt. UL and CSA Listed. Used for stereos and hi-fi systems, home theater sound systems. Connects speaker to receiver, tuner/amplifier.
KIT RCSD LED RT4 10YR 3K 50W  Halo RL560WH-R Retrofit Baffle Trim BULB LED SMART BR30 65W DIM
Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. Comes with a dedicated LED connector for California Title 24 Compliance. For installation into Halo recessed LED housings. Includes an Edison base adapter to accommodate standard screwbase ICAT housings. Can be dimmed with many standard incandescent dimmers, however, an electronic low voltage version of a standard dimmer (with neutral connection) is recommended for many applications. 9.4" W. UL Listed and Classified. For track and recessed lighting usage. Soft white and dimmable via the HomeBrite app. 110 degree beam spread, 650 lumens, 25,000 life hours, 2700K. 5"H x 3.75"D. 65 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Energy Star Approved, RoHS Compliant and mercury free.
Halex 59515 Service Entrance Elbow BULB LED PAR38 3000K 13W/90W  BULB LED PAR38 5000K 13W/90W
Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Medium base, non dimmable, 11000 hours average life. Medium base, non dimmable, 11000 hours average life.
Halex 12107B Concrete Tight Set Screw Connector SRFC MNT WH SM LED W/FRST LENS Halex 04005B Offset Nipple
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Indoor/outdoor, surface mount, wet location, with frosted lens. Dimmable energy efficient LED. 3000K, color rendering index of 80. Low profile small size, ETL/CETL listed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Philips Centium ICN4P32N35I Electronic Ballast Halex 64120 Conduit Elbow SRFC MNT WH LG LED W/FRST LENS
For use with 3 or 4 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except for F32T8/ES 60 degrees). 120-277 volt. UL and CSA listed. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Indoor/outdoor, surface mount, wet location, with frosted lens. Dimmable energy efficient LED. 3000K, color rendering index of 80. Low profile small size, ETL/CETL listed.
SRFC MT ORB LG LED W/FRST LENS SRFC MNT BN LG LED W/FRST LENS SRFC MT CHM LG LED W/FRST LENS
Indoor/outdoor, surface mount, wet location, with frosted lens. Dimmable energy efficient LED. 3000K, color rendering index of 80. Low profile small size, ETL/CETL listed. Indoor/outdoor, surface mount, wet location, with frosted lens. Dimmable energy efficient LED. 3000K, color rendering index of 80. Low profile small size, ETL/CETL listed. Indoor/outdoor, surface mount, wet location, with frosted lens. Dimmable energy efficient LED. 3000K, color rendering index of 80. Low profile small size, ETL/CETL listed.
Halex 58620 Rigid Threaded Conduit Body with Cover and Gasket Halex 59520 Service Entrance Elbow Halex 12105B Concrete Tight Set Screw Connector
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Copper-free die cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL Approved. Tray boxed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 02207B Concrete Tight Compression Coupling Philips NPF RLCS140TPWI Magnetic Ballast DOWNLIGHT 4IN LED CCT 10W
DOWNLIGHT 4IN LED CCT 10W
Our Price: $26.66
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. For use with one FC12T9 or FC16T9 Circline bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. LED downlight comes with color preference feature that allows manual selection between 3 light colors -2700K(soft white), 3000K(warm white), 4000K(bright white). Replacement for recessed can upgrade to LED technology. Comes with both 2 torsion springs and 2 pressure clamps for use with types of recessed cans. 120 volt, 90 CRI. 50,000 hours rated life. Instant start down to -4 degrees F. Energy Star and cUL certified.
DOWNLIGHT 5/6IN LED CCT 11W   Philips STD RS2232TPWI Magnetic Ballast Advance Centium ICN-2P60-N35I Electronic Lamp Ballast
LED downlight comes with color preference feature that allows manual selection between 3 light colors -2700K(soft white), 3000K(warm white), 4000K(bright white). Replacement for recessed can upgrade to LED technology. Comes with both 2 torsion springs and 2 pressure clamps for use with types of recessed cans. 120 volt, 90 CRI. 50,000 hours rated life. Instant start down to -4 degrees F. Energy Star and cUL certified. For use with one FC8T9 and one FC12T9 Circline bulbs.  Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. For use with one or two F72T12, F96T12 or F96T12/ES bulbs. Minimum start temperature 0 degrees (except F96T12/ES- 60 degrees). 120-277 volt. UL and CSA listed.
BULB LED RT4G 27K 9W/50W      BULB LED RT4G 3K 9W/50W       TUBE LED U BEND 6IN15W 1800LMS
BULB LED RT4G 27K 9W/50W
Our Price: $28.78
BULB LED RT4G 3K 9W/50W
Our Price: $28.78
Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Non-dimmable, 15 watt, 120-277 VAC, 1800 lumens, 4000K, 50,000 hours rated lifetime. UL/cUL-Damp Locations, RoHS complaint, UV, IR and Mercury-free. Not for use on instant start fixtures. Fixture must be rewired.
LIGHT DOWN 5/6IN 20W 3000K    BULB LED SMART PAR38 90W DIM  Halex 04007B Offset Nipple
LED retrofit kit can be wired or screwed into an E26 existing socket. Triac dimmable, 3000K, 18W, 1300 lumens, 120V. CRI 90. Rated lifetime of fixture is 50,000 hours, no bulb to replace. Certified Title 24 (T24). IC Rated for direct contact with insulation. UL/cUL- Damp Locations. UV, IR and Mercury-free. Energy Star. For track and recessed lighting or outdoor lights, wherever bright spot lights are needed. Dimmable via the HomeBrite app. 38 degree beam spread, 900 lumens, 25,000 life hours, 3000K. 5.25"H x 4.8"D. 90 watt equivalent using 16 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
BULB LED LIGHTFY BR30 9.5W/65W BULB LED LIGHT DISK 3K 13/75W Halex 02107B Concrete Tight Rain Tight Compression Connector
Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter. Ultra LED recessed and surface mount downlight kit. 50,000 hour average life. Medium base socket adaptor included. Integrated white trim. Wet rated for indoor/outdoor applications. E26 base, 82 CRI, 13 watt, 120 volt. Replaces up to 120 watt incandescent. LED downlight kit. For new construction and retrofit applications, recessed and surface mount applications, in most standard four-inch, five-inch and six-inch insulated ceiling (IC) housings, airtight (AT) housings and non-IC housings. It can also be surface mounted to a standard 4-inch J-Box or specially designed connector box. Dimmable to 20 percent with standard 120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. 120 degree beam angle with low glare. Complies with cULus wet location, ceiling only (shower rated), and damp location listed ceiling and wall. Energy Star. RoHS compliant, cETLus Listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
BULB LED SMART RETRO 5/6IN KIT LED RETRO GIMBAL 4IN TILT     Advance Optanium IOP-2P59-N35I Electronic Lamp Ballast
LED RETRO GIMBAL 4IN TILT
Our Price: $33.73
Used for recessed lighting. Energy efficient LED retrofit kit, compatible with most 5 in. and 6 in. recessed cans. They are easy to install, dimmable and last up to 50,000 hours. Each kit comes with a standard base adapter and a pre-mounted trim. Soft white and dimmable via the HomeBrite app. 110 degree beam spread, 880 lumens, 50,000 life hours, 3000K. 7.4"H x 3.3"D. 75 watt equivalent using 14 watts. Controlled using a smart device, no extra hardware needed. Compatible with most recessed housings. Flexible mounting. Over 600 lumens; 50,000 hours. 3000K. 35 degrees tilt up to 360 degrees rotation. Dimmable to 5 percent with select dimmers. Adjustable Gimbal for accent, task, grazing and downlighting. Easy installation with mounting clips. Damp location listed and IC (insulated ceiling) rated. For use with one or two F72T8 or F96T8 bulbs. Minimum start temperature 32 degrees (Except F96T8 E/S 60 degrees). 120-277 volt. UL and CSA listed.
KIT RCSD LED RT4 3K 65W       Halex 64125 Conduit Elbow KIT RCSD LED RT56 10YR 3K 65W
Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Use to allow a 90 degree change of direction in a run of Rigid or IMC conduit. UL Listed. Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt.
KIT RCSD LED RT56 10YR 4K 65W KIT RCSD LED RT56 10YR 5K 65W KIT RECESSED LED RT56 3K 65W
Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. Medium base socket adaptor included. Integrated white trim. 11000 average life hours, 120 volt. LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations.
KIT RECESSED LED RT56 5K 65W  BULB LED SMART BR30 11W RGBW  LED RETRO GIMBAL 5-6IN TILT
LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations. Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter. Compatible with most recessed housings. Flexible mounting. Over 600 lumens; 50,000 hours. 3000K. 35 degrees tilt up to 360 degrees rotation. Dimmable to 5 percent with select dimmers. Adjustable Gimbal for accent, task, grazing and downlighting. Easy installation with mounting clips. Damp location listed and IC (insulated ceiling) rated.
COUPLING 1/2IN EMT ZINC 45/CTN BULB LED SMART A19 DIM RGBW   Halex 02105B Compression Connector
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Home automation smart lighting controlled by smartphone or tablet. LED bulb tunable between red, green, blue and white. Requires active Wi-Fi network. Each color dimmable. 20,000 hours rated life. 10 watts, replaces 60 watts A19 incandescent. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cULus Listed. 4.33" MOL x 2.36" diameter. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
BULB LED RT656G 27K 13W/75W   Philips Centium ICN2S110SC Electronic Ballast BULB LED LT DISK 5000K 13W/85W
Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. For use with one or two high output bulbs - F48T12/HO, F60T12/HO, F72T12/HO or F96T12/HO. Minimum start temperature -20 degrees (except F96T12/HO E/S 60 degrees). 120-277 volt. UL and CSA Listed. Ultra LED recessed and surface mount downlight kit. 50,000 hour average life. Medium base socket adaptor included. Integrated white trim. Wet rated for indoor/outdoor applications. E26 base, 82 CRI, 13 watt, 120 volt. Replaces up to 120 watt incandescent. LED downlight kit. For new construction and retrofit applications, recessed and surface mount applications, in most standard four-inch, five-inch and six-inch insulated ceiling (IC) housings, airtight (AT) housings and non-IC housings. It can also be surface mounted to a standard 4-inch J-Box or specially designed connector box. Dimmable to 20 percent with standard 120V electronic low voltage dimmers (recommended), incandescent or magnetic low voltage dimmers. 120 degree beam angle with low glare. Complies with cULus wet location, ceiling only (shower rated), and damp location listed ceiling and wall. Energy Star. RoHS compliant, cETLus Listed.
RCSD KIT LED RT56 5K 13W/75W  RCSD KIT LED RT56 3K 13W/75W  Halex 58625 Rigid Threaded Conduit Body with Cover and Gasket
LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations. LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
KIT RCSD LED RT56 3K 100W     STRIPLIGHT LED W/SENSOR 4FT   BULB LED SMART RT 5/6IN RGBW
LED recessed downlight kit. Suitable for 5" and 6" recessed cans. Medium base socket adaptor included. Integrated white trim. 50,000 average life hours. Indoor and outdoor dry, damp and wet locations. Fits in standard 5" or 6" recessed downlight fixtures.820 lumens, 13.5W. 120 volt. Replaces 65W Incandescent BR30 lamp. Red, green, blue and tunable white, 1900K-6500K. Full color control. 20,000 hour life. Suitable for dry and damp locations. No warm-up time, instant-on with full light output and stable lamp to lamp color. Integrated white trim and metal conduit adaptor (included) for direct replacement. Requires active Wi-Fi network and ZigBee certified gateway. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. Must be placed in range of wireless router. Suitable for use in indoor dry and damp location environments. Lamp dims via wireless control and will not operate with a dimmer switch. RoHS compliant, cETLus Listed. 3.35" height x 7.3" diameter.
Coleman 946016618 Speaker Wire BULB LED RT656G 3000K 13W/75W Halex 58630B Rigid Threaded Conduit Body with Cover and Gasket
Parallel wire, power limited circuit cable, -20 Celsius to 105 Celsius. Used for stereos and hi-fi systems, home theater sound systems, lamps, and radios. Soft annealed copper per ASTM B3-90 conductor and PVC. UL Type CL2, UL1581 and UL13 approved. Clear jacket, on a spool. Medium base socket adaptor included. Integrated white trim and white reflector. Up to 30 degree tilt Gimbal feature. E26 base. 50,000 hours average life. Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved.
WRAP LED 4FT W/MOTION SENS 40W Coleman 553046607 Type CL-2 Electrical Wire Coleman 94605M418 Type CL-2 Speaker Cable
Wrap light, motion sensor and photo-control. 40 watts, 3600 lumens, 4000K, 50,000 average life hours. Delay timer (on/off). 4' direct wire. UV, IR and Mercury-free. ETL/cETL- damp locations. Energy Star and T24 Certified. 3" x 48" x 6". Conductor 18 AWG soft annealed solid copper per ASTM B3-90. PVC thermostatic insulation, temperature 60 degrees Celsius. Used for thermostat controls, heating and air conditioning installations, burglar alarm systems, intercom systems and doorbells. Type CL2, 150 volts. PVC insulation UL13 for power limited circuit cable for other than plenum, riser, or tray uses and UL1581 approved. Parallel wire, power limited circuit cable, -20 Celsius to 105 Celsius. Used for stereos and hi-fi systems, home theater sound systems, lamps, and radios. Soft annealed copper per ASTM B3-90 conductor and PVC. UL Type CL2, UL1581 and UL13 approved. Clear jacket, on a spool.
Barostat 553026607 Solid Type CL-2 Thermostat Cable Barostat 553056607 Solid Type CL-2 Thermostat Cable Coleman 94607M418 Type CL-2 Speaker Cable
Conductor 18 AWG soft annealed solid copper per ASTM B3-90. PVC thermostatic insulation, temperature 60 degrees Celsius. Used for thermostat controls, heating and air conditioning installations, burglar alarm systems, intercom systems and doorbells. Type CL2, 150 volts. PVC insulation UL13 for power limited circuit cable for other than plenum, riser, or tray uses and UL1581 approved. Conductor 18 AWG soft annealed solid copper per ASTM B3-90. PVC thermostatic insulation, temperature 60 degrees Celsius. Used for thermostat controls, heating and air conditioning installations, burglar alarm systems, intercom systems and doorbells. Type CL2, 150 volts. PVC insulation UL13 for power limited circuit cable for other than plenum, riser, or tray uses and UL1581 approved. Parallel wire, power limited circuit cable, -20 Celsius to 105 Celsius. Used for stereos and hi-fi systems, home theater sound systems, lamps, and radios. Soft annealed copper per ASTM B3-90 conductor and PVC. UL Type CL2, UL1581 and UL13 approved. Clear jacket, on a spool.
Coleman 946036618 Speaker Cable Barostat 553036607 Solid Type CL-2 Thermostat Cable Coleman 5407 Bell Wire
Two bare copper conductors laid flat with integral PVC insulation and jacket. Clear jacket construction has one bare copper and one tinned copper conductor. Temperature rated from -20 to 60 degrees C, operating voltage 300 volts maximum. 18/2 stranded, flat, boxed. UL Standard 13 & 444, CSA C22.2 No. 214, NEC Article 725 & 800.. Conductor 18 AWG soft annealed solid copper per ASTM B3-90. PVC thermostatic insulation, temperature 60 degrees Celsius. Used for thermostat controls, heating and air conditioning installations, burglar alarm systems, intercom systems and doorbells. Type CL2, 150 volts. PVC insulation UL13 for power limited circuit cable for other than plenum, riser, or tray uses and UL1581 approved. Type CL2 low voltage cable using thermoplastic insulated solid conductors. Resistant to the spread of fire in accordance with NEC. Not for riser, plenum, or tray uses and 60 degrees Celsius. Use for thermostat control, burglar alarms, intercoms and doorbells. Soft annealed solid copper per ASTM B3-90 conductor. PVC insulation and UL13 approved for power limited circuit cable for other than plenum, riser, or tray uses. 150 volt.
Coleman 552660408 Low Voltage Cable Southwire 65676902 Electrical Wire Coleman 553076607 Type CL-2 Solid Thermostat Cable
Thermoplastic PVC jacketed parallel constructed service cord. Not for hard usage in accordance with NEC. Used for outdoor low voltage lighting systems. Soft annealed stranded cooper per ASTM B3-90 conductor. UL13 approved. ETL Listed type CL2 power limited circuit cable is a general-purpose 8 conductor low voltage control cable. Construction provides solid uncoated copper conductors insulated with polyvinyl chloride (PVC) insulation twisted together without filler and covered with an ETL listed sunlight resistant PVC jacket. Conductor colors are red, white, green, blue, yellow, brown, orange and black. Used for air conditioning controls, heat pumps, heating controls, thermostats and bell and alarm systems. For use in accordance with the NEC Article 725. Rated 60 degrees Celsius continuous in air. Solid 18/8 type CL2. Meets UL 1581 vertical flame tray test. 15 mil jacket thickness, approximately 202 mil overall cable diameter. Conductor 18 AWG soft annealed solid copper per ASTM B3-90. PVC thermostatic insulation, temperature 60 degrees Celsius. Used for thermostat controls, heating and air conditioning installations, burglar alarm systems, intercom systems and doorbells. Type CL2, 150 volts. PVC insulation UL13 for power limited circuit cable for other than plenum, riser, or tray uses and UL1581 approved.
Coleman 5408 Bell Wire TUBE LED U BEND 1.625SPACE 15W Barogation 547070408 Solid Sprinkler Cable
Type CL2 low voltage cable using thermoplastic insulated solid conductors. Resistant to the spread of fire in accordance with NEC. Not for riser, plenum, or tray uses and 60 degrees Celsius. Use for thermostat control, burglar alarms, intercoms and doorbells. Soft annealed solid copper per ASTM B3-90 conductor. PVC insulation and UL13 approved for power limited circuit cable for other than plenum, riser, or tray uses. 150 volt. Non-dimmable, 15 watt, 120-277 VAC, 1800 lumens, 4000K, 50,000 hours rated lifetime. UL/cUL-Damp Locations, RoHS complaint, UV, IR and Mercury-free. Not for use on instant start fixtures. Fixture must be rewired. Underground sprinkler system wire. 18/7 solid, 30 volts RMS max. Used for sprinkler control systems. Soft annealed solid copper per ASTM B3-90. Polyethylene insulation and jacket. 18 AWG bare copper. Cable consists of 7 bare copper insulated conductors with an overall outer jacket diameter of 0.268; UL listed.
Coleman 552670508 Low Voltage Cable Southwire 12/2X500 W/G Quartz Single Ended Electrical Wire Southwire 12/3X500 W/G Electrical Wire
Thermoplastic PVC jacketed parallel constructed service cord. Not for hard usage in accordance with NEC. Used for outdoor low voltage lighting systems. Soft annealed stranded cooper per ASTM B3-90 conductor. UL13 approved. Pump cable, type THW, thermoplastic (PVC) insulated, 600 volt. All wire insulated. Pump cable, type THW, thermoplastic (PVC) insulated, 600 volt. All wire insulated.
Southwire 10/3X500 W/G Twisted Electrical Wire
Pump cable, type THW, thermoplastic (PVC) insulated, 600 volt. All wire insulated.
   
 
1