Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL WIRE > SJ CORD
Sort By:
1
Halex 91211 Concrete Tight Set Screw Connector Halex 91221 Concrete Tight Set Screw Coupling Halex 91212 Concrete Tight Set Screw Connector
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90211 Compression Connector Halex 91222 Concrete Tight Set Screw Coupling Halex 12110 Concrete Tight Set Screw Connector
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90221 Concrete Tight Compression Coupling WALLPLATE TOGGLE LT ALMOND 2G Arrow Hart PJ2 Mid Size Unbreakable Wall Plate
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Arrow Hart PJ2 Mid Size Unbreakable Wall Plate Halex 90212 Concrete Tight Rain Tight Compression Connector Halex 12210B Concrete Tight Set Screw Coupling
Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938". Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 90222 Concrete Tight Compression Coupling Halex 03705B Concrete Tight Set Screw Conduit Offset Halex 90371 Concrete Tight Set Screw Conduit Offset
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved.
Arrow Hart 732-BOX Weatherproof Lampholder WALLPLATE TOGGLE LT ALMOND 3G Halex 02110 Compression Connector
Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts.  Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90401 Offset Nipple Halex 12112 Concrete Tight Set Screw Connector Halex 21210 Concrete Tight Set Screw Connector
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 03707B Concrete Tight Set Screw Conduit Offset Halex 12212 Concrete Tight Set Screw Coupling Halex 02210 Concrete Tight Compression Coupling
Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Jandorf 60492 Lampholder Fixture Socket Halex 90372 Concrete Tight Set Screw Conduit Offset Arrow Hart 2507W-BOX Slimline Lampholder
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Zinc die cast. Use to connect EMT conduit to a metal outlet box or enclosure where an offset is desired. UL Approved. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Halex 02905B Compression Conduit Elbow Jandorf 60496 Lampholder Fixture Socket Cooper BP942 Push Thru Interior Lampholder
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized.
Halex 90402 Offset Nipple Halex 12215 Concrete Tight Set Screw Coupling Halex 14405 Pull Conduit Elbow
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Jandorf 60470 Lamp Socket With 1-11/16 in Hickey Jandorf 60471 Lamp Socket With 3-13/16 in Double Leg Hickey Jandorf 60472 Lamp Socket With 2-15/16 in Double Leg Hickey
Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts.
Halex 12115 Concrete Tight Set Screw Connector Halex 02112 Compression Connector Cooper 3925-BOX Interior Lampholder
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925.
Arrow Hart 968-BOX Keyless Fixture Socket Arrow Hart PJ4 Mid Size Unbreakable Wall Plate Arrow Hart PJ4 Mid Size Unbreakable Wall Plate
Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 8.563". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 8.563".
Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow Cooper 2982-BOX Interior Lampholder
Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Molded of heat and impact-resistant urea. 250 watts, 250 volts.  Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized.
Eagle 926-BOX 3-Way Turn Knob Lampholder Halex 21212 Concrete Tight Set Screw Connector Jandorf 60490 Lampholder Fixture Socket
Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base
Jandorf 60537 Snap-In Lamp Socket With L Hickey Halex 02212 Concrete Tight Compression Coupling MOUNT PLATE 4IN STRIP LIGHT
With 6", 18 awg wire leads. 660 watts, 250 volts. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Junction box cover plate. 4 inch.
Arrow Hart 145-BOX Weatherproof Pigtail Lampholder Halex 12120 Concrete Tight Set Screw Connector Halex 14407 Pull Conduit Elbow
For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at a 90 degree bend. Tray box.
Arrow Hart S752WSP Keyless Cleat Socket Jandorf 60493 Lampholder Fixture Socket Halex 12220 Concrete Tight Set Screw Coupling
For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements. Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base, Plunger Terminal Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Jandorf 60474 Lamp Socket With Double Leg Hickey Cooper BP940ABD Push Thru Metal Lampholder Jandorf 60540 Snap-In Single Spring Lamp Socket
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60543 Snap-In Single Spring Lamp Socket With 3/4 in Wire Leads Arrow Hart PJ1-CP Unbreakable Wall Plate Arrow Hart PJ1-CP Mid Size Unbreakable Wall Plate
With 6", 18 awg wire leads. 660 watts, 250 volts. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125". Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125".
Halex 02115 Compression Connector Halex 20210 Concrete Tight Compression Connector Jandorf 60538 Snap-In Lamp Socket
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60539 Lamp Socket Halex 21222 Concrete Tight Set Screw Coupling Jandorf 60497 Lampholder Fixture Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
Jandorf 60541 Double Spring Clip Snap-In Lamp Socket Jandorf 60473 Lamp Socket With 1-7/32 in Ring Arrow Hart BP968 Keyless Fixture Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. Molded of thermoset plastic. 75 watts, 125 volts. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements.
Jandorf 60406 Keyless Lamp Socket Jandorf 60407 On/Off Push Through Lamp Socket Halex 14605 Inside Corner Pull Conduit Elbow
Fit standard lamp stems. Fit standard lamp stems. Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed.
Cooper 917ABD-BOX Turn Knob Lampholder Halex 21211 Concrete Tight Set Screw Connector Cooper 925ABD-BOX 3-Way Turn Knob Lampholder
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Cooper 1198-BOX Bottom Turn Knob Lampholder with Removable Knob Cooper 940ABD-BOX 3-Way Push Thru Socket SOCKET NON SHUNTED 4 PACK
Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets.
Jandorf 60475 Lamp Socket With Spring Clip Jandorf 60491 Lampholder Fixture Socket Jandorf 60494 Lampholder Fixture Socket
Molded of thermoset plastic. 75 watts, 125 volts. Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp, Plunger Terminal
Arrow Hart 609-BOX Keyless Lampholder Cooper BP925ABD Lampholder Cooper 980ABD-BOX 3-Way Pull Chain Socket
High-strength insulator porcelain. Thermoset ring. 2 piece with 9" wire leads, medium base, keyless switch. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Halex 21221 Concrete Tight Set Screw Coupling Jandorf 60563 Lamp Socket Jandorf 60535 On/Off Push Through Lamp Socket
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Wire leads, 75 watts, 125 volts. Molded of thermoset plastic.
Jandorf 60530 On/Off Turn Knob Lamp Socket Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling
Molded of thermoset plastic. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Jandorf 60400 Keyless Lamp Socket Jandorf 60401 On/Off Push Through Lamp Socket Jandorf 60408 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Cooper BP145 Lampholder Arrow Hart 969-BOX Keyless Fixture Socket Cooper BP980ABD Push Thru Metal Lampholder
For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 0.44" bracket height, 1.88" overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60402 On/Off Turn Knob Lamp Socket Jandorf 60409 3-Way Turn Knob Lamp Socket WALLPLATE TOGGLE LT ALMOND 5G
Fit standard lamp stems. Fit standard lamp stems. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 10.375".
Cooper BP917ABD Lampholder Arrow Hart PJ5 Mid Size Unbreakable Wall Plate Arrow Hart PJ5 Mid Size Unbreakable Wall Plate
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 10.375". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 10.375".
Jandorf 60410 On/Off Pull Chain Lamp Socket Halex 20221 Concrete Tight Compression Coupling Westinghouse 7040700 Keyless Socket
Fit standard lamp stems. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Medium base. Threaded 1/8 hickey IP. 250 volts, 660 watts maximum. UL Listed.
Jandorf 60545 On/Off Turn Knob Lamp Socket Jandorf 60403 3-Way Turn Knob Lamp Socket Cooper BP1198 Bottom Turn Knob Lampholder
Molded of thermoset plastic. Fit standard lamp stems. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements.
Halex 20212 Concrete Tight Compression Connector Jandorf 60582 3-Way Keyless Lamp Socket Halex 02220 Concrete Tight Compression Coupling
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Jandorf Lamp Socket, Keyless, Series: 60582, 660 W Lamp, 250 V, Medium Base, Porcelain, Ivory, Matte, UL Listed, For Light Commercial and Residential Applications? Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Jandorf 60488 Lampholder Fixture Socket Jandorf 60518 Lampholder Fixture Socket Jandorf 60487 Lampholder Fixture Socket
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Wire leads, 6" long. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
Jandorf 60229 Keyless Replacement Lamp Socket With 1/8 in IPT Hickey Halex 14607 Inside Corner Pull Conduit Elbow Jandorf 60533 3-Way Turn Knob Lamp Socket
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA Approved. Tray boxed. Molded of thermoset plastic.
Jandorf 60565 Lamp Socket With 6 in Wire Leads Jandorf 60576 2-Piece Ring Keyless Fixture Socket Jandorf 60404 On/Off Pull Chain Lamp Socket
Wire leads, 75 watts, 125 volts. Jandorf Fixture Socket, 2-Piece Ring Keyless, Series: 60576, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, White, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting Fit standard lamp stems.
Jandorf 60536 On/Off Bottom Turn Knob Lamp Socket Halex 20222 Concrete Tight Compression Coupling Jandorf 60577 Lamp Socket With 8 in Wire Leads
Molded of thermoset plastic. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Jandorf Lamp Socket, Series: 60577, 660 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
LED PAR20 7W/50W MED DIM 3000K Halex 58705 EMT Set Screw Conduit Body with Cover and Gasket LINK CORD 5FT SHOP/STRIP LIGHT
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC), and maintenance. With cover and gasket. UL Approved. Tray boxed. For use with ETI linkable LED fixtures.
Jandorf 60534 On/Off Pull Chain Lamp Socket Jandorf 60228 Keyless Lamp Socket With 1/8 in IPT Hickey Jandorf 60411 3-Way Pull Chain Lamp Socket
Molded of thermoset plastic. Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Fit standard lamp stems.
Jandorf 60575 2-Piece Ring Fixture Socket Philips Comp-Covered LC1420CI Magnetic Ballast Jandorf 60579 Lamp Socket With Side Outlet
Jandorf Fixture Socket, 2-Piece Ring, Series: 60575, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, Ivory, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. Jandorf Lamp Socket, Series: 60579, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Jandorf 60580 Lamp Socket With Single Bushing Strap Jandorf 60223 Twin Cluster Ceiling Fixture Kit BULB LED BR30 65W EQUIV NONDIM
Jandorf Lamp Socket, Series: 60580, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18AWG pre-wired 8" insulated leads, rated 250 volts for use with 2 light bulbs, 50 watt maximum, 4" offset crossbar, two 8-32 x 1/2" mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish. Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free.
LED BR30 8.5W/65W MED BS 2700K Coleman 97172 Low Voltage Replacement Spot Light Coleman 97171 Low Voltage Replacement Tier Light
Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free. With adjustable direction. Can be mounted to deck or in ground. Durable plastic construction with plastic lens. Uses number 95503 4 watt wedge base bulb, included. Add on to existing low voltage lighting fixtures for illuminating paths, walkways, driveways, or for general lighting needs. Traditional tier light design. Impact resistant polymer construction. Includes surface mount bracket for deck mounting and 4 watt T3 bulb. 9" fixture height.
BULB LED PAR20 DIM 7W 3000K   Arrow Hart 2144 Oversize Wall Plate Arrow Hart 2144V-BOX Oversize Wall Plate
Ultra LED, directional. Dimmable, medium aluminum base. Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25". Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25".
Arrow Hart 2144W-BOX Oversize Wall Plate LED PAR30L 930 13W DIM 3000K  Jandorf 60405 3-Way Pull Chain Lamp Socket
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Oversize - 3.50" x 5.25". Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Fit standard lamp stems.
Jandorf 60520 Lampholder Fixture Socket Jandorf 60517 Lampholder Fixture Socket SOCKETS U-BEND BI-PIN NON SHNT
Wire leads, 6" long. Wire leads, 6" long. Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets.
Jandorf 60578 Bottom Turn Knob Lamp Socket SOCKETS T8 BI-PIN NON SHUNT   LED PAR38 G10 MED 3000K
Jandorf Lamp Socket, Bottom Turn Knob, Series: 60578, 250 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
BULB LED PAR38 75WEQUIV NONDIM Coleman Cable 95732 Moonrays Landscape Low Volt Lights LED5PAR16 DIM GU10 BASE 3000K
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included. No warm up time, instant-on with full light output and stable color. Mercury and lead free. 3,000K, warm white. 120 volts, 60Hz. cETLus Listed.
Coleman Cable 95734 Moonrays Landscape Low Volt Lights LED5.5PAR20 DIM E26 3000K 400L Halex 21220 Concrete Tight Set Screw Coupling
Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included. Ultra LED, directional. Dimmable, medium aluminum base. Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved.
Halex 12207B Concrete Tight Set Screw Coupling PAR20 7W/50W MED DIM LED 5000K Jandorf 60532 3-Way Pull Chain Lamp Socket
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Molded of thermoset plastic.
SPOT LIGHT QUICK-CONNECT 100L LED GROW LT A19 9WRED ENRICHED Arrow Hart 2510W-BOX Short Lampholder
Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord Non-dimmable A19 LED grow light lasts up to 25,000 hours, Red spectrum enriched for budding and flowering. Emits more light in the useful 450nm blue and 655nm red spectrum than regular white LED bulbs. Rated for high humidity use. Instant full brightness. 9 watts, 120 volts, UL/CUL Listed, FCC Compliant. 4.5" length x 2.25" diameter. Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts.
ACCS HIGH BAY V-HANGER W/CHAIN Arrow Hart 2509W-BOX Standard Lampholder PAR38 20W COLD START LED 3000K
High bay v-hanger with chain. V-hook hangers, 36" chain set with S-hooks. Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
Halex 12205B Concrete Tight Set Screw Coupling Coleman Cable 95728 Moonrays Landscape Low Volt Lights SPOT LIGHT QUICK-CONNECT 200L
Zinc die cast. Use to join two lengths of EMT conduit together. UL Approved. Adjustable direction. Diecast aluminum with glass lens. Uses number 95499, 20 watt bi-pin Halogen bulb, included. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord
PAR30L 10.5W 830 DIM LED 3000K PAR30L 10.5W 850 DIM LED 5000K BR30 GROW LT MED BASE 9W LED
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Non-dimmable BR30 LED grow light lasts up to 25,000 hours and is red spectrum enriched for budding and flowering. Rated for high humidity use. Emits more light in the useful 450nm blue and 655nm red spectrum than regular white LED bulbs. Instant on to full brightness. UL/CUL Listed, FCC Compliant, Mercury free. 5"H x 3.75"D.
PATHWAY LT MUSHRM QK-CONN 35L Coleman Cable 95836 Moonrays Landscape Low Volt Lights Coleman 95878 Low Voltage 3-Tier Holton Path Light
Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Diecast aluminum with clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses a 10 watt Halogen bulb, included. Stamped aluminum with nickel finish and ribbed plastic lens. Uses 11 watt number 95527 clear wedge base bulb, included. 9" above ground height.
Philips Centium ICN2P32N35I Electronic Ballast Coleman Cable 95804 Moonrays - Galena Landscape Low Volt Lights Philips Centium ICN2S40N Electronic Ballast
For use with 1 or 2 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except F32T8/ES 60 degrees). UL and CSA Listed. Diecast aluminum fixture with rubbed bronze finish and frosted plastic lens Mix-N-Match with other low voltage lights for a custom landscape design. 16.5" above ground height. Uses 11 watt number 95527 wedge base bulb, included. For use with one or two F30T12, F34T12 or F40T12 bulbs. Minimum start temperature 50 degrees. 120-277 volt. UL and CSA Listed.
PATHWAY LT BOLLARD QK-CONN 35L Coleman 95828 Low Voltage Rock Spotlight Halex 12107B Concrete Tight Set Screw Connector
Bollard Quick-Connect Pathway Light.  Plastic housing. 35 Lumens. 0.5 Watts.18/2 SPT-2W, 8 Ft. Cord. Decorative rock blends in with landscaping. Made from durable polysresin with glass lens. Uses 20 watt MR-16 number 95518 bulb, included. 5" tall above ground height. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
PATHWAY LT MUSHRM QK-CONN 35L Arrow Hart 2149 Oversize Wall Plate Arrow Hart 2149 Oversize Wall Plate
Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Molded from non-flammable thermoset, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Oversize - 5.25" x 5.313". Boxed. Molded from non-flammable thermoset, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Oversize - 5.25" x 5.313". Boxed.
Arrow Hart 2149 Oversize Wall Plate Philips Centium ICN4P32N35I Electronic Ballast Eagle 942-BOX Push Thru Interior Lampholder
Molded from non-flammable thermoset, flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. Oversize - 5.25" x 5.313". Boxed. For use with 3 or 4 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except for F32T8/ES 60 degrees). 120-277 volt. UL and CSA listed. Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized.
Arrow Hart PJ1 Mid Size Unbreakable Wall Plate Arrow Hart PJ1 Mid Size Unbreakable Wall Plate Arrow Hart PJ1 Mid Size Unbreakable Wall Plate
Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125". Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125". Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125".
WALLPLATE SWITCH TOGGLE 1G    Coleman Cable 95725 Moonrays Landscape Low Volt Lights Arrow Hart 2506W-BOX Stationary Slimline Lampholder
Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. 4.875" x 3.125". PAGODA style diecast aluminum fixture with black finish and clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses replacement 11 watt number 95527 wedge base bulb, included. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Halex 12105B Concrete Tight Set Screw Connector Halex 02207B Concrete Tight Compression Coupling Arrow Hart 924W-BOX Standard Lampholder
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts.
Philips NPF RLCS140TPWI Magnetic Ballast Philips STD RS2232TPWI Magnetic Ballast Arrow Hart 2503W-BOX Stationary Slimline Lampholder
For use with one FC12T9 or FC16T9 Circline bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. For use with one FC8T9 and one FC12T9 Circline bulbs.  Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Advance Centium ICN-2P60-N35I Electronic Lamp Ballast Arrow Hart 2504W-BOX Slimline Lampholder Arrow Hart PJ2 Mid Size Unbreakable Wall Plate
For use with one or two F72T12, F96T12 or F96T12/ES bulbs. Minimum start temperature 0 degrees (except F96T12/ES- 60 degrees). 120-277 volt. UL and CSA listed. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. Virtually unbreakable, with high structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 4.938".
Halex 02107B Concrete Tight Rain Tight Compression Connector Advance Optanium IOP-2P59-N35I Electronic Lamp Ballast Arrow Hart PJ3 Mid Size Unbreakable Wall Plate
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. For use with one or two F72T8 or F96T8 bulbs. Minimum start temperature 32 degrees (Except F96T8 E/S 60 degrees). 120-277 volt. UL and CSA listed. Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75".
Arrow Hart PJ3 Mid Size Unbreakable Wall Plate Arrow Hart PJ3 Mid Size Unbreakable Wall Plate UTIL WRAP LED 17L 4K 120V 2FT
Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Molded from non-flammable Polycarbonate. Virtually unbreakable, with high structural rigidity, long-term form retention and superior impact and abrasion resistance. Screw-catch feature holds mounting screws captive and simplifies installation. Matching screws provided. High gloss finish is soil resistant. Mid-size - 4.875" x 6.75". Suitable for ceiling, wall, or suspension mounting.
COUPLING 1/2IN EMT ZINC 45/CTN SPOT LT LANDSCAPE LED KT 25FT Cooper 975ABD-BOX Keyless Lampholder
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Landscape Spotlight Kit. LED. Dusk Til Dawn, 25 Ft. Plastic housing. 3-Spotlights. Dusk to Dawn Transformer, 12 Watt . Two (2) End Caps. Link Up to 8 Spotlights. 100 Lumens (Per Spotlight). 1.5 Watts (Per Spotlight). 25 - Ft. Cord. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Halex 02105B Compression Connector UTIL WRAP LED 32L 4K 120V 4FT Philips Centium ICN2S110SC Electronic Ballast
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Suitable for ceiling, wall, or suspension mounting. For use with one or two high output bulbs - F48T12/HO, F60T12/HO, F72T12/HO or F96T12/HO. Minimum start temperature -20 degrees (except F96T12/HO E/S 60 degrees). 120-277 volt. UL and CSA Listed.
WRAP LP DIM LED 3200L 120V 4FT 56513141 LIGHT WRAP OPP 4FT   Arrow Hart 2500W-BOX Fixed Lampholder
Suitable for ceiling, wall, or suspension mounting. Used in commercial offices, retail, restaurants, schools, hospitals, multifamily residences, and hotel/motel locations in interior hallways, bedrooms, utility/laundry rooms, living rooms, or recreational rooms. Suitable for use in closets, as defined in NEC Section 410.16. UL/cUL- Damp Locations. UV, IR and Mercury-free. Ceiling or wall mounted. Not Dimmable. 40 Watts, 120-277 VAC, 4000K, CRI 80, Rated Lifetime: 50,000 hours. Molded of durable white thermoset plastic. Can be used for flush or surface mounting. Push wire cap, screw switch. Maximum 660 watts, 600 volts. UL Listed.
PATHWAY LT MSHRM LED KIT 30FT Cooper 610-BOX Sign Receptacle LIGHT WRAP LED 4FT 40W 3600LMS
Mushroom Pathway Light Kit. LED. Light reaches up to a 30ft. in distance. (3) Pathway lights. 12-Watt Dusk to Dawn Transformer. (2) End Caps link up to 24 Pathway lights. 35 Lumens (per spotlight).0.5 Watts (per spotlight). 18/2 spt-2w, 30 Ft. Cord Two piece with screw terminals. High strength insulator porcelain. For use in signs, fixtures, decorative lighting and similar applications. 660 watts. 250 volt. Meets all UL 496 requirements. Wrap light, 4000K, 50,000 hours rated lifetime. UL/cUL- Damp Locations. UV, IR and Mercury-free. Energy Star.
SPOT LT LANDSCAPE LED KIT 25FT LIGHT WRAP LED 2FT 25W 1800LMS Arrow Hart 2501W-BOX Lampholder