Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL WIRE > LAMP CORD
Sort By:
1
Halex 90440 Screw-In Connector Halex 90441 Screw-In Connector Halex 90451 Screw-In Coupling
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Halex 90580 Cable Connector Halex 90481 Concrete Tight Set Screw Connector Halex 90211 Compression Connector
Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 90570 Combination Clamp Connector Orrco 60170 Hex Nut Halex 90442 Screw-In Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Holds connecting parts in place. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs.
Halex 91100 Conduit Elbow Jandorf 60204 Flat Crossbar Halex 90420 Squeeze Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Crossbar for mounting light fixtures. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 65705B Snap-In Cable Connector Halex 90421 Squeeze Connector Halex 90221 Concrete Tight Compression Coupling
In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Jandorf 60230 Lamp Lock-Up Cap Halex 75403 Anti-Short Conduit Bushing Halex 90212 Concrete Tight Rain Tight Compression Connector
Tapped 1/8" IP. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
CONNECTOR DPLX FLX N-MTL 3/8IN Halex 91531 Combination Coupling Halex 90422 Squeeze Connector
In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 90222 Concrete Tight Compression Coupling Jandorf 60203 Offset Crossbar Kit Halex 91101 Conduit Elbow
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Crossbar for mounting light fixtures. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Jandorf 60144 Lamp Coupling Jandorf 60232 Lamp Lock-Up Cap Jandorf 60162 Lamp Nipple
Decorative piece that connects nipples of different sizes together. Tapped 1/8" IP. For repairing or making lighting fixtures and lamps.
Jandorf 60234 Lamp Lockup Kit Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp.
Jandorf 60163 Lamp Nipple Jandorf 60231 Lamp Lock-Up Cap Jandorf 60145 Reducer
For repairing or making lighting fixtures and lamps. Tapped 1/8" IP. Connects nipples of different sizes.
Jandorf 60141 Assorted Lamp Screw Halex 75400 Anti-Short Conduit Bushing Jandorf 94991 Beaded Chain With NO 6 Connector
Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. With connector.
Jandorf 94992 Beaded Chain With NO 6 Connector Jandorf 94993 Beaded Chain With NO 6 Connector Jandorf 60146 Reducer
With connector. With connector. Connects nipples of different sizes.
Jandorf 60354 Chain Connector Halex 02110 Compression Connector Halex 90401 Offset Nipple
Links together two beaded chains. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved.
Jandorf 60358 Chain Connector Halex 90452 Screw-In Coupling Halex 11005B Conduit Elbow
Links together two beaded chains. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Jandorf 60226 Candelabra Base Socket Cover Jandorf 94995 Beaded Chain With NO 10 Connector Jandorf 60148 Reducer
Covers base socket. For use with a maximum 25W bulb. With connector. Connects nipples of different sizes.
Jandorf 60351 Chain Connector Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60370 Chain Connector Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector
Links together two beaded chains. Links together two beaded chains. Links together two beaded chains.
Jandorf 60375 Pull Chain Bell Jandorf 60376 Chain Connector Jandorf 60233 Lamp Lock-Up Cap
Decorative attachment for end of beaded chain. Links together two beaded chains. Tapped 1/8" IP.
Jandorf 60160 Lamp Nipple Jandorf 60208 Flat Crossbar Jandorf 60227 Standard Base Socket Cover
For repairing or making lighting fixtures and lamps. Crossbar for mounting light fixtures. Covers base socket. For use with a maximum 25W bulb.
Orrco 60142 Socket Key With 1/2 in Extension Jandorf 60243 Lamp Loop Halex 02210 Concrete Tight Compression Coupling
Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M. Decorative piece used for hanging fixtures. 1/8 IP brass finish. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Halex 20581 Cable Connector Jandorf 60149 Lamp Coupling Jandorf 60250 Lamp Canopy Ball
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. Decorative piece that connects nipples of different sizes together. Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass.
Jandorf 60171 Lamp Nipple Jandorf 60173 Lamp Nipple Jandorf 60100 Spindle Finial
For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60147 Reducer Halex 75401 Anti-Short Conduit Bushing Jandorf 60360 Pull Chain Bell
Connects nipples of different sizes. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Decorative attachment for end of beaded chain.
Jandorf 60237 Ceiling Hickey Jandorf 60238 Ceiling Hickey Jandorf 60205 Offset Swivel Crossbar
Used for mounting drop fixtures. Used for mounting drop fixtures. Crossbar for mounting light fixtures.
Orrco 60167 Hex Nut Halex 91102 Pull Conduit Elbow Halex 02905B Compression Conduit Elbow
Holds connecting parts in place. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Jandorf 60150 Lamp Coupling Jandorf 60164 Lamp Nipple Orrco 60143 Socket Knob With 1/2 in Extension
Decorative piece that connects nipples of different sizes together. For repairing or making lighting fixtures and lamps. Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish.
Jandorf 60151 Reducer Jandorf 60161 Lamp Nipple Jandorf 60240 Ceiling Hickey
Connects nipples of different sizes. For repairing or making lighting fixtures and lamps. Used for mounting drop fixtures.
Jandorf 60241 Ceiling Hickey Halex 75402 Anti-Short Conduit Bushing Orrco 60201 Ceiling Crossbar Kit
Used for mounting drop fixtures. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Crossbar for mounting light fixtures.
Halex 90402 Offset Nipple Jandorf 60174 Lamp Nipple Orrco 60169 Hex Nut
Zinc die cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4". UL Approved. For repairing or making lighting fixtures and lamps. Holds connecting parts in place.
Jandorf 60239 Ceiling Hickey Jandorf 60361 Beaded Chain With NO 6 Connector Jandorf 60110 Tapped Top Hat Lamp Finial
Used for mounting drop fixtures. With connector. Secures lamp shade to harp.
Jandorf 60209 Flat Crossbar With Nipple Jandorf 60172 Lamp Nipple Halex 02112 Compression Connector
Crossbar for mounting light fixtures. For repairing or making lighting fixtures and lamps. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Jandorf 60102 Tapped Pyramid Finial Jandorf 60175 Lamp Nipple Jandorf 60101 Spindle Finial
Secures lamp shade to harp. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60357 Pull Chain Coupling Halex 90292 Concrete Tight Compression Short Radius Conduit Elbow Halex 90291 Concrete Tight Compression Short Radius Conduit Elbow
Used to secure beaded chain with a fastener. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed. Zinc die cast. Concrete-tight. Indoor or outdoor applications. Use to connect EMT conduit to a metal outlet box or enclosure where a 90 degree bend is required and a pipe bending tool is not used. UL, CSA Listed.
Jandorf 60359 Pull Chain Coupling Jandorf 60103 Tapped Pyramid Finial Orrco 60168 Locknut Assortment
Used to secure beaded chain with a fastener. Secures lamp shade to harp. Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts.
Jandorf 60356 Pull Chain Coupling Jandorf 60242 Lamp Loop Jandorf 60106 Tapped Bullet Finial
Used to secure beaded chain with a fastener. Decorative piece used for hanging fixtures. 1/8 IP brass finish. Secures lamp shade to harp.
Halex 02212 Concrete Tight Compression Coupling Jandorf 60120 Clip-On Lamp Shade Adapter Jandorf 60202 All Purpose Adjustable Crossbar Kit
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Brass finish. Crossbar for mounting light fixtures.
Jandorf 60121 Detachable Lamp Harp Jandorf 60107 Tapped Bullet Finial Jandorf 60122 Detachable Lamp Harp
Protects bulb from lamp shade and holds lamp shade in place. Secures lamp shade to harp. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer Halex 20491 Combination Coupling Jandorf 60140 Lamp Check Ring
Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples.
BULB LED BR30 8.5W 2700K      Halex 02115 Compression Connector Halex 20210 Concrete Tight Compression Connector
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Jandorf 60123 Detachable Lamp Harp Jandorf 60124 Detachable Lamp Harp Jandorf 60125 Detachable Lamp Harp
Protects bulb from lamp shade and holds lamp shade in place. Protects bulb from lamp shade and holds lamp shade in place. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60236 Screw Collar Loop Halex 26571 Flexible MC Snap-In Connector Jandorf 60112 Tapped Ball Finial
Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only Secures lamp shade to harp.
Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector Jandorf 60206 Loop Crossbar Kit
With connector. With connector. Crossbar for mounting light fixtures.
Jandorf 60220 Ceiling Blank-Up Kit Jandorf 60371 Beaded Chain With NO 6 Connector Jandorf 60373 Beaded Chain With NO 6 Connector
Decorative piece used to cover the outlet box after removal of an existing fixture. With connector. With connector.
Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60136 Lamp Cord Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer
With connector. With polarized plug. 18 gauge. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer.
Jandorf 60211 Ceiling Canopy Kit Jandorf 60118 Lamp Shade Riser Halex 04212 Squeeze Connector
Used to cover the outlet box and hang ceiling fixture. 5". Raises lamp shade. 1/4-27 thread. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 02120 Compression Connector Halex 02215 Concrete Tight Compression Coupling Jandorf 60119 Lamp Shade Riser
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Raises lamp shade. 1/4-27 thread.
Jandorf 60165 Lamp Pipe BULB LED R20 DIM 6W 2700K     Halex 20221 Concrete Tight Compression Coupling
For repairing or making lighting fixtures and lamps. Ultra LED, directional. Dimmable, medium aluminum base. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
Jandorf 60134 Lamp Cord Jandorf 60135 Lamp Cord Jandorf 60127 Detachable Lamp Harp
With polarized plug. 18 gauge. With polarized plug. 18 gauge. Protects bulb from lamp shade and holds lamp shade in place.
Halex 20212 Concrete Tight Compression Connector Halex 02220 Concrete Tight Compression Coupling Jandorf 60138 Lamp Socket/Switch
Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum.
Jandorf 60218 Ceiling Blank-Up Kit Jandorf 60128 Detachable Lamp Harp BULB LED BR30 DIM 9W 5000K
Decorative piece used to cover the outlet box after removal of an existing fixture. Protects bulb from lamp shade and holds lamp shade in place. Medium base, 120 volt, 25,000 hours average life.
Jandorf 60214 Ceiling Canopy Kit Jandorf 60215 Ceiling Canopy Kit Jandorf 60216 Ceiling Canopy Kit
Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60133 Lamp Cord Jandorf 60212 Ceiling Canopy Kit Halex 20492 Combination Coupling
With polarized plug. 18 gauge. Used to cover the outlet box and hang ceiling fixture. 5". Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified.
Halex 20222 Concrete Tight Compression Coupling Jandorf 60219 Ceiling Blank-Up Kit Jandorf 60217 Ceiling Canopy Kit
Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Decorative piece used to cover the outlet box after removal of an existing fixture. Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60213 Ceiling Canopy Kit BULB LED BR30 65W EQ DIMMABLE BULB LED BR30 65W EQ DIMMABLE
Used to cover the outlet box and hang ceiling fixture. 5". Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free. Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free.
LED R20 7.5W/45W MED DIM 2700K R20 7.5W/45W MED DIM  LED5000K LED7.5BR30DIM 7.5/65W EQV 5K
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium base, 120 volt, 25,000 hours average life.
BULB LED 65W BR30 E26 27K 650L BULB LED 10YR 65W BR30 27K 2PK BULB LIGHT LED 10YR BR30 60W
Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
BULB LED BR30 10YR DIM35K 65W Jandorf Make A Lamp Lamp Kit Jandorf 60221 Glass Shade Holder
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum.
Jandorf 60222 Glass Shade Holder BULB LED BR40 DIM 12W 2700K   BULB LED R20 10YR DIM 27K 50W
Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum. Medium base, 120 volt, 25,000 hours average life. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
BULB LED R20 10YR DIM 5K 50W  BULB LED BR40 DIM 12W 5000K   BULB LED BR40 DIM 12W 3500K
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Medium base, 120 volt, 25,000 hours average life. Medium base, 120 volt, 25,000 hours average life.
Jandorf 60132 SPT-1 Lamp Kit With Harp BULB LED GREEN PAR38 REFLECTOR LED PAR38 MED BS 7W FLOOD YEL
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees.
BULB LED INTGRTD 27K 15W/65W  Acuity 1233/147YPY Fluorescent Shoplight Fixture LED BR40 10.5W/65W MED DIM 5K
Dimmable, 11,000 average life hours. E26 medium base. For task lighting, single reflector, Includes 5' cord and plug, uses two 40W T12 48 inch fluorescent lamps, not included. UL Listed. For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free.
Westinghouse 7026800 3-Way Make-A-Lamp Socket Kit BULB LED SMART 60W A19 GLOBE  BULB LED BR40 DIMMABLE 5000K
Brass plated 10" detachable harp, 18 gauge 8' UL Listed cord set, 3 way socket, finial and hardware. 150 watts maximum. Soft white and dimmable via the HomeBrite app. 300 degree beam spread, 800 lumens, 25,000 life hours, 2700K. 4.8"H x 2.35"D. 60 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free.
BULB LED BR40 DIMMABLE 2700K  Jandorf Make A Lamp SPT-1 Lamp Kit With Harp BULB LED BR30 65W DIMMABLE
For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free.
Westinghouse 0101100 Recessed Light Converter BULB LED SMRT BENT TIPCANDLABR BULB LED BR40 DIM 27K 13W/85W
Transform existing recessed lighting into a pendant or light fixture. Hang any pendant or light fixture of 50 pounds or less where you currently have recessed lighting. Adjusts to any fit can size between 4" and 6". No visible screws or hardware and the decorative medallion can be painted. Works with existing recessed cans that use medium base PAR16, R16, A19, R20, PAR20, BR25, BR30, R30, PAR30, BR38, PAR38, BR40 or R40 light bulbs and is suitable for damp locations. Includes adjustable bar, socket adapter, mounting bar, round metal plate, decorative medallion and hardware. Can be used on sloped ceilings up to 45 degrees.1.46" height x 6" diameter. ETL Listed. Flame tip bulb shape. 200 degree beam spread, 300 lumens, 25,000 life hours, 2700K. Dimmable with smart device app. 4.85"H x 1.65"D. 40 watt equivalent using 4.5 watts. Candelabra E12 base. Controlled using a smart device, no extra hardware needed. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
BULB LED BR40 DIM 5K 13W/85W  Feit BR40/DM/2500/3K/L Dimmable LED Lamp BULB LED SMART BR30 65W DIM
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. For track lighting. Instant on to full brightness. Suitable for damp locations. 25,000 average life hours. 120 volt, 110 degree beam spread. FCC Compliant. 100 percent mercury free. For track and recessed lighting usage. Soft white and dimmable via the HomeBrite app. 110 degree beam spread, 650 lumens, 25,000 life hours, 2700K. 5"H x 3.75"D. 65 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Energy Star Approved, RoHS Compliant and mercury free.
CONNECTOR 90DEG 3/8IN 35/CTN  Halex 04210 Squeeze Connector Halex 05803B Snap-In Cable Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Halex 15803B Duplex Connector Acuity 172J2C Fluorescent Shoplight Fixture Halex 02207B Concrete Tight Compression Coupling
In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved. Galvanized treadplate reflector produces more light output than standard shoplights. For residential applications, 12" hanging chain, 5' grounded cord and plug. Operates with 2-32 watt T8 lamps. Low noise, instant-on, start at 0 degrees F. Thermally protected unit for energy efficiency. For use with non-dimmable switches only. UL Listed. ENERGY STAR Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved.
TUBE LED U BEND 6IN15W 1800LMS BULB LED SMART PAR38 90W DIM  BULB LED LIGHTFY BR30 9.5W/65W
Non-dimmable, 15 watt, 120-277 VAC, 1800 lumens, 4000K, 50,000 hours rated lifetime. UL/cUL-Damp Locations, RoHS complaint, UV, IR and Mercury-free. Not for use on instant start fixtures. Fixture must be rewired. For track and recessed lighting or outdoor lights, wherever bright spot lights are needed. Dimmable via the HomeBrite app. 38 degree beam spread, 900 lumens, 25,000 life hours, 3000K. 5.25"H x 4.8"D. 90 watt equivalent using 16 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter.
Feit PAR38/R/LEDG5 Non-Dimmable LED Lamp Halex 02107B Concrete Tight Rain Tight Compression Connector Halex 04205B Squeeze Connector
Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
BULB LED SMART BR30 11W RGBW  COUPLING 1/2IN EMT ZINC 45/CTN Halex 11007B Conduit Elbow
Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter. Use to join two lengths of EMT conduit together. Zinc. UL, CSA Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
BULB LED SMART A19 DIM RGBW   Halex 04207B Squeeze Connector Halex 02105B Compression Connector
Home automation smart lighting controlled by smartphone or tablet. LED bulb tunable between red, green, blue and white. Requires active Wi-Fi network. Each color dimmable. 20,000 hours rated life. 10 watts, replaces 60 watts A19 incandescent. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cULus Listed. 4.33" MOL x 2.36" diameter. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL Approved.
Halex 04203B Squeeze Connector SHOPLIGHT HEAVY DUTY GRID 4LT Coleman 600006621 SPT-1 Lamp Cord
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. For residential and light commercial applications. Steel wireguard helps provide protection for the bulb. Fully assembled, ready-to-install. Includes a 5' power cord, 5A maximum convenience outlet and a pull chain power switch. The residential electronic ballast (120V 60Hz 1.50 Amps) starts reliably down to 0 degrees F. Mount to ceiling using the 12" mounting chains, included. Uses (4) 32W linear T8 fluorescent lamps, (not included). All mounting hardware is included. For use on non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Energy Star certified. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 600006619 SPT-1 Lamp Cord Coleman 600006607 SPT-1 Lamp Cord Coleman 600006608 SPT-1 Lamp Cord
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 600006618 SPT-1 Lamp Cord Coleman 600006601 SPT-1 Lamp Cord Coleman 601266607 SPT-2 Lamp Cord
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool.
Coleman 601266608 SPT-2 Lamp Cord Coleman 601266601 SPT-2 Lamp Cord TUBE LED U BEND 1.625SPACE 15W
Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Thermoplastic PVC jacket, not for hard usage in accordance with NEC. Used for lamps, small appliances and radios. Soft annealed stranded copper per ASTM B3-90 conductor. 300 volt maximum. PVC insulation and UL62, UL1581 Listed. Spool. Non-dimmable, 15 watt, 120-277 VAC, 1800 lumens, 4000K, 50,000 hours rated lifetime. UL/cUL-Damp Locations, RoHS complaint, UV, IR and Mercury-free. Not for use on instant start fixtures. Fixture must be rewired.
   
 
1