Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL WIRE > ARMORED CABLE
Sort By:
1
Halex 90440 Screw-In Connector Halex 90441 Screw-In Connector Halex 90451 Screw-In Coupling
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.
Halex 91530 Combination Coupling Halex 90580 Cable Connector Halex 90510 Twin Screw Clamp Connector
Zinc die cast. Use to join EMT conduit to non-metallic sheathed cable. #14/2, #12/3 or 2 #14/2. Indoor use only. With UPC. UL Approved. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements.
Halex 90481 Concrete Tight Set Screw Connector Halex 90570 Combination Clamp Connector Halex 96510 2-Piece Butterfly Clamp Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL Approved. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required.
Halex 90442 Screw-In Connector Halex 91100 Conduit Elbow Halex 90420 Squeeze Connector
Zinc die cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 65705B Snap-In Cable Connector Halex 90512 Twin Screw Clamp Connector Halex 27511 Hit Lock Cable Connectors
In a dry location, use to connect aluminum or steel AC, aluminum MC, and steel flexible metal conduit. Suitable for: aluminum and steel armored cable with 14/2 - 10/2 wire, steel flexible metal conduit, .45 diameter aluminum interlocked MC cable. Features snap-in installation, no locknut, insulating bushing included. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified.
Halex 90421 Squeeze Connector Halex 75403 Anti-Short Conduit Bushing CONNECTOR DPLX FLX N-MTL 3/8IN
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved.
Halex 91531 Combination Coupling Halex 90513 Twin Screw Clamp Connector Halex 90422 Squeeze Connector
Zinc die cast. Use to join EMT conduit to flexible metal conduit. Indoor use only. With UPC. UL Approved. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Halex 20511 Twin Screw Clamp Connector Halex 91101 Conduit Elbow Halex 90514 Twin Screw Clamp Connector
Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Halex 75400 Anti-Short Conduit Bushing Halex 90452 Screw-In Coupling Halex 11005B Conduit Elbow
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. Use to join two pieces of flexible metallic conduit (Greenfield) together. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 20581 Cable Connector Halex 75401 Anti-Short Conduit Bushing Halex 91102 Pull Conduit Elbow
In a dry location, use to connect AC (BX) cable to a steel outlet box or other metal enclosure. Suitable for #14-2 steel armored cable. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
Halex 27519 Hit Lock Cable Connectors Halex 75402 Anti-Short Conduit Bushing Halex 05115 Twin Screw Clamp Connector
Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL Approved. No. 75400 - Fits cable range: 14/2, 14/3, 12/2 No. 75401 - Fits cable range: 14/4, 12/3, 6/1, 4/1. No. 75402 - Fits cable range: 12/4, 10/2, 10/3, 2/1. No. 75403 - Fits cable range: 10/4, 8/2, 8/3, 1/1. No. 75404 - Fits cable range: 8/4, 6/2, 6/3, 4/2, 4/3, 6/4. Fits non metallic cable, flex cords, multi flex cords; fitting range .834 - 1.520 inches diameter SE cables 2 conductor 4/0. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed.
Halex 27512 Hit Lock Cable Connectors Halex 26512 2-Piece Butterfly Clamp Connector Halex 20491 Combination Coupling
Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Zinc die cast. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. No locknut required. Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified.
Halex 05120 Twin Screw Clamp Connector Halex 20510 Twin Screw Clamp Connector BULB LED BR30 8.5W 2700K
Fits non metallic cable, flex cords, multi flex cords fitting range 1.085 - 1.520 inches diameter. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Tray boxed. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
Halex 20512 Twin Screw Clamp Connector Halex 26571 Flexible MC Snap-In Connector Halex 04212 Squeeze Connector
Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Halex MC Snap-In Connector, Flexible, 3/8 in Nominal, Steel, Includes: Insulating Bushing, CSA Certified, UL Listed, For use to connect aluminum or steel ac, aluminum mc, and steel flexible metal conduit, indoor use only Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
BULB LED R20 DIM 6W 2700K     Westinghouse 8133300 Honey Swirl Light Accessory Shade BULB LED BR30 DIM 9W 5000K
Ultra LED, directional. Dimmable, medium aluminum base. Honey swirl scavo shade with wide bell shape. Fitter - 2-1/4", height - 4-3/ 8", diameter - 6-7/ 8". Medium base, 120 volt, 25,000 hours average life.
Halex 20492 Combination Coupling Westinghouse 8186900 Light Shade BULB LED BR30 65W EQ DIMMABLE
Use to joint EMT conduit to flexible metal conduit. Die cast zinc. UL Approved, CSA Certified. Fitter - 3-1/4", diameter - 6" Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free.
BULB LED BR30 65W EQ DIMMABLE LED R20 7.5W/45W MED DIM 2700K R20 7.5W/45W MED DIM  LED5000K
Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
LED7.5BR30DIM 7.5/65W EQV 5K  BULB LED 65W BR30 E26 27K 650L BULB LED 10YR 65W BR30 27K 2PK
Medium base, 120 volt, 25,000 hours average life. Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
BULB LIGHT LED 10YR BR30 60W  BULB LED BR30 10YR DIM35K 65W Westinghouse 8149400 Clip-On Shade
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. White plastic dome. 4-1/4" height, 7-3/4" diameter.
BULB LED BR40 DIM 12W 2700K   BULB LED R20 45W EQUIV NON-DIM BULB LED R20 10YR DIM 27K 50W
Medium base, 120 volt, 25,000 hours average life. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
BULB LED R20 10YR DIM 5K 50W  BULB LED BR40 DIM 12W 5000K   BULB LED BR40 DIM 12W 3500K
Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Medium base, 120 volt, 25,000 hours average life. Medium base, 120 volt, 25,000 hours average life.
Southwire 55082415 Armored Cable Westinghouse 8116700 Swirl Light Shade Feit BPMR11/LED Non-Dimmable LED Lamp
Wire whip, 14/3 AWG. Fitter - 2 1/4", height - 5", diameter - 6". Performance LED, for track lighting. 12 volt, 240 lumens, 3000K, 38 degree beam angle, 25,000 average life hours. 1.5" MOL x 1.35" diameter. Instant on to full brightness. Suitable for damp locations. UL Listed, FCC Compliant, RoHS Compliant. Mercury free.
Westinghouse 8135600 Tortoise Shell Light Shade Westinghouse 8190000 Light Globe BULB LED GREEN PAR38 REFLECTOR
Fitter - 2-1/4", height - 5-1/4", diameter - 4-3/4". White acrylic. 4" fitter, 8" diameter. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees.
LED PAR38 10.5W/75W MED 3000K LED PAR38 MED BS 7W FLOOD YEL Westinghouse 8142200 Light Shade
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. Fitter - 2-1/4", height - 4-3/4", diameter - 5-3/8"
BULB LED INTGRTD 27K 15W/65W  BULB LED PAR20 50WATT NON-DIM BULB LED NON-DIMM PAR20 5K 3PK
Dimmable, 11,000 average life hours. E26 medium base. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free. Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
LED BR40 10.5W/65W MED DIM 5K Westinghouse 8138200 Light Shade Westinghouse 8137500 Tortoise Shell Light Shade
For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. Linen glass with a wide bell shape. Fitter - 2-1/4", height - 5", diameter - 7-3/4". Fitter - 2-1/4", height - 5", diameter - 7-1/2".
Westinghouse 8131400 Light Shade Halex 75105B Hit Lock Cable Connectors Westinghouse 8140900 Light Shade
Fitter - 2-1/4", height - 5-3/ 4", diameter - 4-7/ 8". Fits NM Cable: #14/2, #14/3, #12/2, #10/2, #10/3. Snap-In, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable. UL Approved, CSA certified. Tapered shape. Standard 2-1/4-inch fitter.
BULB LED SMART 60W A19 GLOBE  BULB LED BR40 DIMMABLE 5000K  BULB LED BR40 DIMMABLE 2700K
Soft white and dimmable via the HomeBrite app. 300 degree beam spread, 800 lumens, 25,000 life hours, 2700K. 4.8"H x 2.35"D. 60 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. For track lighting, recessed lighting. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt, 110 degree beam spread, 6.3" MOL x 5" diameter. UL/CUL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free.
Halex 27515 Cable Connectors Westinghouse 8126500 Hand Painted Leaf Light Shade LED12PAR38 FLOOD E26 3K 1100L
Push-in style with captive locking wedge. Rigid PVC. Superior strain relief and insulation. In a dry location, use to secure #14 - #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 - #10/3. Fits 1/2" knock outs. UL, CSA Listed. Hand painted glass makes each piece a unique creation. Fitter - 2-1/4", height - 5-3/8", diameter - 6". Ultra LED, directional. Dimmable, E26 medium base. 25,000 hours average life. RoHS compliant, contain no mercury, lead or other hazardous materials and emit no UV or IR radiation.
Westinghouse 8142700 Handblown Spice Swirl Light Shade Armorlite 68580021 Type MC Armored Cable BULB LED BR30 65W DIMMABLE
Spice swirlglass. Tapered barrel shape, yellow shade with white swirls. Fitter 2-1/4", height 5-3/4", diameter 4-5/8" Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Track and recessed lighting, Instant on to full brightness. 5" MOL x 3.75" diameter. Indoor-outdoor, suitable for damp locations. UL/CUL Listed, RoHS Compliant and mercury free.
Westinghouse 8141200 Light Shade Armorlite 68579221 Type MC Armored Cable Westinghouse 8131000 Giraffe Spot Handblown Light Shade
Slightly flared. Subtle white-on-white basket weave pattern. 5-7/8" high, 5-7/8" wide, 3-3/4" deep. Standard 2-1/4" fitter. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Handblown exotic giraffe spot shade. The tapered drum shape features a mottled giraffe spot pattern with rich brown and yellow hues that offers a vibrant centerpiece or a bright accent. Fitter - 2-1/4", height - 5-3/4", diameter - 4-1/2".
Westinghouse 8135300 Dappling Design Light Shade Westinghouse 8141300 Light Shade Westinghouse 8131100 Fire Pit Handblown Light Accessory Shade
Fitter - 2-1/4", height - 4-3/4", diameter - 5". Tapered shape. Standard 2-1/4-inch fitter. Fitter - 2-1/4", height - 5-3/8", diameter - 4-7/8".
CAGE SHADE METAL ORB          CAGE SHADE METAL BRUSHD NICKEL BULB LED PAR30L 75WATT NON-DIM
CAGE SHADE METAL ORB
Our Price: $17.44
Medium screw base. 120 volts. Instant on to full brightness. UL/CUL Listed, RoHS Compliant, Mercury free.
BULB LED SMRT BENT TIPCANDLABR BULB LED BR40 DIM 27K 13W/85W BULB LED BR40 DIM 5K 13W/85W
Flame tip bulb shape. 200 degree beam spread, 300 lumens, 25,000 life hours, 2700K. Dimmable with smart device app. 4.85"H x 1.65"D. 40 watt equivalent using 4.5 watts. Candelabra E12 base. Controlled using a smart device, no extra hardware needed. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant. Dimmable down to 10 percent. Contain no mercury, lead or other hazardous materials. No UV or IR radiation. 120 volt. RoHS compliant.
Duraclad 55278321 Type MC Armored Cable Feit BR40/DM/2500/3K/L Dimmable LED Lamp Duraclad 55274921 Type MC Armored Cable
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. For track lighting. Instant on to full brightness. Suitable for damp locations. 25,000 average life hours. 120 volt, 110 degree beam spread. FCC Compliant. 100 percent mercury free. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
BULB LED SMART BR30 65W DIM   BULB LED PAR38 3000K 13W/90W  BULB LED PAR38 5000K 13W/90W
For track and recessed lighting usage. Soft white and dimmable via the HomeBrite app. 110 degree beam spread, 650 lumens, 25,000 life hours, 2700K. 5"H x 3.75"D. 65 watt equivalent using 9 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Energy Star Approved, RoHS Compliant and mercury free. Medium base, non dimmable, 11000 hours average life. Medium base, non dimmable, 11000 hours average life.
Westinghouse 8560200 Light Shade CONNECTOR 90DEG 3/8IN 35/CTN  Westinghouse 8140500 Light Shade
Crystal glass. 3-1/4" fitter, 5-3/4" height, 5-1/2" diameter. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. Tapered shape. Standard 2-1/4-inch fitter.
Halex 04210 Squeeze Connector Halex 05803B Snap-In Cable Connector Halex 15803B Duplex Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Zinc die cast. In a dry location, use to connect BX cable to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved. In a dry location, use to connect two pieces of flexible armored cable (Greenfield or BX) to a steel outlet box or other metal enclosure, when using only one knock-out opening. UL Approved.
Halex 05112B Twin Screw Clamp Connector Halex 05103B Twin Screw Clamp Connector Westinghouse 8124200 Ruffled Crimp Edge Light Shade
Fits non metallic cable number 6/3 to number 2/3 AWG flex cord .800 to 1.350 inches diameter or SE cable 3 conductor or 3 number 1/0 minimum; 3 conductor or 3 number 2/0 maximum. With 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements. Fits 1/2" knockout, non-metallic cable numbers 14/2, 12/2, 12/3 AWG or 2 number 14/2 AWG or flex cord .300 to .560 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL, Listed, meets CSA requirements. Replacement glass, 2-1/4" fitter, 4-7/8" height, 5" diameter.
Armorlite 68579222 Type MC Armored Cable Westinghouse 8561700 Light Shade Halex 05110B Twin Screw Clamp Connector
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Replacement glass, 3-1/4" fitter, 4-3/4" height, 3-5/8" diameter. Fits non metallic cable number 14/2 to number 6/3 AWG or number 3/10/3 AWG or flex cord .450 to .730 inches diameter. With a 1/2" knockout. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Armorlite 68583421 Type MC Armored Cable BULB LED SMART PAR38 90W DIM  Duraclad 55274922 Type MC Armored Cable
Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. For track and recessed lighting or outdoor lights, wherever bright spot lights are needed. Dimmable via the HomeBrite app. 38 degree beam spread, 900 lumens, 25,000 life hours, 3000K. 5.25"H x 4.8"D. 90 watt equivalent using 16 watts. Medium E26 base. Controlled using a smart device, no extra hardware needed. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
BULB LED LIGHTFY BR30 9.5W/65W Feit PAR38/R/LEDG5 Non-Dimmable LED Lamp Duraclad 55278521 Type MC Armored Cable
Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter. Non-dimmable, indoor/outdoor. Instant on to full brightness. 120 volt, 38 degrees. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Duraclad 55275021 Type MC Armored Cable Armolite 68580022 Solid Metal Clad Cable Halex 05107B Twin Screw Clamp Connector
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Fits non metallic cable, such as Romex, number 14/2 round, number 12/3-8/3 AWG or flex cord .460 to .720 inches diameter. In a dry location, use to connect nonmetallic sheathed cable to a steel outlet box or other metal enclosure. UL Listed, meets CSA requirements.
Halex 04205B Squeeze Connector Westinghouse Williamsburg 8516200 Handblown Hurricane Glass Halex 05703B Combination Clamp Connector
Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Clear 1-5/8" fitter, 6-1/2" height, 3-3/4" diameter. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield, BX, NM or Metal Clad) to a steel outlet box or other metal enclosure. 3/8" size fits 1/2" knock outs. UL Approved.
Westinghouse 8570500 Handblown Light Shade Westinghouse 8557000 Handblown Light Shade Duraclad 55278322 Type MC Armored Cable
Fitter - 3-1/4", diameter - 6" Gloss white glass, machine blown. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
BULB LED SMART BR30 11W RGBW  Westinghouse 8110000 Handblown Etched Fan-Fixture Shade Halex 11007B Conduit Elbow
Home automation smart lighting controlled by smartphone or tablet. Red, green, blue and tunable white. LED bulb tunable between soft white and daylight white (1900-6500 Kelvin). Dimmable at each set color temperature. Requires active Wi-Fi network. 20,000 hours rated life. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cETLus Listed. 5" MOL x 3.74" diameter. Fitter - 1 5/8", height - 5", diameter - 4-1/4". Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.
BULB LED SMART A19 DIM RGBW   Halex 04207B Squeeze Connector Westinghouse 8525400 Light Shade
Home automation smart lighting controlled by smartphone or tablet. LED bulb tunable between red, green, blue and white. Requires active Wi-Fi network. Each color dimmable. 20,000 hours rated life. 10 watts, replaces 60 watts A19 incandescent. Free LIGHTIFY app runs on Apple iOS7 or above and Android 4.1 or above. RoHS compliant, cULus Listed. 4.33" MOL x 2.36" diameter. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved. Clear prismatic globe. 3-1/4" fitter, 6-3/8" diameter.
Westinghouse 8557800 Handblown Schoolhouse Light Shade Westinghouse 8560400 Light Shade Westinghouse 8560600 Utility Light Shade
White glass. 4" fitter, 6-1/4" height, 7-1/4" diameter. Replacement glass, 3-1/4" fitter, 4-1/2" height, 5-3/4" length. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design.
Westinghouse 8528200 Handblown Etched Light Shade Armolite 68583422 Solid Metal Clad Cable Halex 04203B Squeeze Connector
Frosted, 2-1/4" fitter, 5" height, 4-1/8" diameter. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Zinc die cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2" knock outs. UL Approved.
Westinghouse 8557100 Handblown Light Globe Armolite 68580023 Solid Metal Clad Cable Westinghouse 8560800 Utility Light Shade
Gloss white glass, machine blown. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design.
Duraclad 55278323 Type MC Armored Cable Duraclad 55274923 Type MC Armored Cable Westinghouse 8552800 Handblown Schoolhouse Light Shade
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. White glass, 4" fitter, 7" height, 8-1/2" diameter.
Westinghouse 8180000 Wheat Design Ruffled Edge Light Diffuser Westinghouse 8149300 Clip-On Shade Westinghouse 8180700 Floral Lamp Shade/Diffuser
Clear with ruffled edge. Square 12", depth 1-1/2".  Pack of 10. Clear prismatic acrylic dome. 4" height, 8" diameter. Clear floral design on white.
Westinghouse 8175900 Channel Shade/Diffuser Westinghouse 8160900 Utility Light Shade Armolite 68583423 Solid Metal Clad Cable
Replacement glass, 3-3/4" width; 3" depth; 3/8" hole size. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
Westinghouse 8181900 Dot Pattern Light Diffuser Duraclad 55278301 Type MC Armored Cable Duraclad 55274901 Type MC Armored Cable
Clear, dot pattern. 13'' diameter, 1-1/4'' depth. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems.
Armorlite 68580001 Type MC Armored Cable Westinghouse 8181000 Floral Light Diffuser Armorlite 68583401 Type MC Armored Cable
Constructed with soft-drawn copper, type THHN insulated conductors which are individually wrapped with a moisture-resistant, flame-retardant paper covering. Interlocking steel armor is applied over the assembly. A 16 AWG aluminum bond wire is placed inside the armor, runs longitudinally and is in intimate contact with the armor for its entire length. General applications: Dry locations only, branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential buildings, power, lighting, control and signal circuits, concealed or exposed installations, installed in cable tray and approved raceways, environmental air-handling spaces per NEC and under raised floors for information technology equipment conductors and cables per NEC 645.5(D) & 645.5(D)(2). 300.22(C), fished or embedded in plaster. Meets or exceeds the requirements of UL Standard 4 for Armored Cable, UL Standard 83, Federal Specification A-A59544 (formerly J-C-30B), and the National Electrical Code. Listed for use in UL 1, 2, and 3 hour through-penetration firestop systems. Clear floral design on white. Pre-installed conductors within an overall protective metallic interlocked armor. 45 percent lighter than steel MC cable. Cable reverse wound for ease of pulling and installation. Conductors - solid bare annealed copper per ASTM B-3, stranded copper stranding per ASTM B-8 for conductor. Conductor insulation rated 90 degree Celsius dry, 75 degrees Celsius wet at 600 volt. Conductor insulation is flame retardant, heat resistant PVC with flame, oil and gasoline resistant nylon jacket. General applications: branch, feeder, and service power distribution in commercial, industrial, institutional, and multi-residential construction/facilities, power, lighting, control, and signal circuits, concealed or exposed installations, installed in raceway/conduit, fished or embedded in plaster, installed in cable tray, and as aerial cable on a messenger. UL Classified 1, 2 and 3 hour through penetration firestop systems: W-L-3110, W-L-3113, W-L-31120, W-L-3121, C-A-J-3115, C-A-J-3140, C-A-J-3142, C-A-J-3202, C-A-J-4065, and C-A-J-4066. UL Listed.
   
 
1