Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL BOXES > CEILING BOXES
Sort By:
1
Thomas & Betts B520A-UPC Ceiling Box Carlon B518A-UPC Ceiling Box Carlon A615DE-CAR Flexible Raceway Ceiling Box
With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4" - 3", 6 integral clamps. 4" diameter non-metallic ceiling box, 20 cubic inch volume. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. Meets NEMA OS-2, UL Listed. RoHS Compliance. With captive nails. 18 cubic inch volume. Listed for fixture support up to 50 lb. 3" diameter x 2-3/4" depth. Meets NEMA OS-2, UL Listed. Safe, non-conductive. Quick connect. 20.5 cubic inch capacity. Knockouts 1/2" x 3/4". 4" diameter x 2-1/8" depth.
Thomas & Betts B618RR Ceiling Box Carlon B520P-UPC Ceiling Box Carlon Super Blue BH525A-UPC Ceiling Box
Round old work box with 4 integral swing clamps. Three zip mount retainers. High temperature resistant. 4-1/4" diameter x 2-3/4" depth. UL Listed. Ceiling box with captive nails, ground lug and screw attached. Fixture spacing for 2-3/4" and 3-1/2". 6 integral clamps. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. UL Listed. Meets NEMA OS-2. Rigid polycarbonate box used for decorative light fixtures or low voltage devices. Made of a heat resistant thermoplastic material that is lightweight, noncorrosive and nonconductive. Captive nails, 25 cubic inch, 3" deep, large capacity boxes are perfect for specialty lighting, track lighting, or smoke/security devices. Listed for fixture support up to 50 lb. Includes mounting hardware. UL Listed.
J-M 67447 Electrical Conduit Carlon Super Blue BH614R Old Work Ceiling Fan Box Raco 8292 Ceiling Pan Box
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Spring metal mounting brackets. Fixture rating limit of 10 pounds. Heat resistant. 3-1/2" diameter round old/new work box base, ears and snap-in bracket. UL Listed. Non-metallic sheathed cable wiring system. Clamps in bottom. Four cable knockouts, one 1/2" conduit. 3-1/2" diameter x 1/2" depth. UL Listed.
Raco 161 Drawn Electrical Box Carlon Super Blue BH525P Ceiling Box Hubbell 8293 Ceiling Pan Box
Drawn metal 4" octagon box used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. Maximum recommended support load for a  static fixture is 50 lb. TS bracket for wood or metal studs features gauging tabs and recessed nailing spurs. 1-1/2" depth, 1/2" bracket setback, three 1/2" side knockouts, five 1/2" bottom knockouts. 15.5 cubic inch capacity. Combination screw heads allow for fast cover or fixture installation. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Combination ceiling box, hard shell with captive nails and grounding lug. 3" depth. Listed for fixture support up to 50 lb. 4.062" diameter x 3" depth. UL Listed. Five 1/2" bottom conduit knockouts, 6 cubic inch capacity. Acceptable for use in 2-hour rated walls and ceilings. 4" diameter x 1/2" depth. UL Listed.
J-M 67454 Electrical Conduit Thomas & Betts B620KR-UPC Ceiling Box Allied Moulded 9351-NK Outlet Box
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Ceiling box with 14.38"-22.5" adjustable bar hanger. 4" diameter x 2-1/4" depth. Fixture spacing for 2-3/4" and 3-1/2". Integral clamps. Listed for fixture support up to 50 pounds. UL Listed. Ceiling box with nails, speed clamps. 50 lb. fixture rated. 2 hour wall and ceiling fire rating classification. 4" diameter x 2-3/8" depth. UL Listed.
Raco 164 Electrical Box Hubbell 160 Octagon Box Raco 295 Ceiling Fan Box
Four cable pryouts and one 1/2" KO side, one - 1/2" KO bottom. Octagon boxes are used in the installation of ceiling or wall light fixtures. TS bracket features gauging tabs and recessed nailing spurs, for wood or metal studs. Acceptable for use in 2-hour fire rated walls and ceilings. 1-1/2" deep - 15.5 cubic inches. UL Listed. UPC bar code. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed. Ceiling fan 4" round pan, 1/2" deep, 6 cubic inches, 5 bottom 1/2" knockouts. Used for new work and renovations. Ceiling fan rated, used in the installation of heavy light fixtures or ceiling fans. Maximum 70 pound fan or 150 pound fixture. Includes nonmetallic sheathed cable connector, mounting hardware, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed.
J-M 67611 Rigid Conduit Thomas & Betts B708-SHK Ceiling Pan Box Allied 101543 EMT Electrical Conduit
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Shallow ceiling fan outlet box with mounting screws. 1 integral clamp. Non-conductive high impact lightweight PVC. 5 knock outs, 8 cubic inch capacity. For new work or renovations. Mounts ceiling fan securely to the ceiling joist. Rated for fans up to 35 pounds and fixture up to 50 pounds. 4" diameter x 5/8" depth. UL Listed. High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
Carlon B620HG-UPC Ceiling Box J-M 67462 Rigid Conduit Carlon Super Blue BH525H Ceiling Box
Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4" - 23-1/2" adjustable bar hanger. Fixture spacing for 2-3/4" and 3-1/2". 4" diameter x 2-1/4" depth. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL Listed, meets NEMA OS-2. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. 4" diameter x 2.95" depth. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and clamps to make installation faster. Listed for fixture support up to 50 lb. Hanger bar adjusts from 11-1/2" to 18-1/2". UL Listed.
Saf-T-Cap 0105000 Outlet Ceiling Fan Box Raco Romex 176 Electrical Box Thomas & Betts B720R-SHK Ceiling Fan Box
For new construction or applications where attic is accessible. Fits all ceiling fans. Maximum load rating for ceiling fans is 70 pounds. 100 pounds for fixtures. 8-32 threads for lightweight fixtures, 10-24 threads for ceiling fans. 3 knockouts for conduit or Romex. 2 Romex clamps. 1-1/2" deep, 15.5 cubic inch capacity. Includes SAF-T-CAP and mounting screws. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed. Non-conductive high impact lightweight PVC. Full 20 cubic inch capacity. 6 integral clamps. 4" diameter x 2-1/4" depth. Used for new work or renovations. Rated for fans up to 35 pounds and fixture up to 50 pounds. Mounts fan to a cross member secured between ceiling joist. Mounting screws included. UL Listed.
Raco 296 Ceiling Fan Box Carlon Super Blue BH525HP Ceiling Box Osram Sylvania 78563 LED Lamp
Ceiling fan box, 4" octagon, 1-1/2" deep. 3 bottom 1/2" knockouts. Used in new work and renovations. Ceiling fan rated octagon boxes can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Ceiling box with hanger bar, adjusts from 11-1/2" to 18-1/2". Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Listed for fixture support up to 50 lb. 4" diameter x 3" depth. UL Listed. Ground lug included. Candelabra base. For indoor use. Replacement for traditional incandescent C7 bulbs. 65,000K, 80 CRI. 15,000 hours average life.
J-M 67603 Rigid Conduit Feit BPC7/LED Mercury Free Accent LED Lamp Raco 8325 Ceiling Outlet Box
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Candelabra screw base. Less than 1 watt, 7 watt replacement, 50,000 average life hours. 2.15" overall length. 3500K. Instant on to full brightness. RoHS Compliant, Mercury free. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 pound maximum recommended support load. Furnished with 3/8"-18 NPS trade size fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. 1-1/2" deep - 15.5 cubic inches.
4W 2175K B10 360L DIM MED CLRD Raco 8326 Ceiling Outlet Box Thomas & Betts BH525L Ceiling Fan Box
Indoor and outdoor use. 15,000 hours average life. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 lb. maximum recommended support load. Furnished with 3/8"-18 NPS fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. New work ceiling fan box with nails and metal brace for stud finishing. Rated for fans up to 35 pounds and fixtures up to 50 pounds. 4.062" diameter x 3.06" depth. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wire capacity, and comes with molded-in nailing flanges. UL Listed.
Raco 2027-FBAR Round Vapor Barrier Box J-M 67470 Rigid Conduit Raco 7120 Ceiling Fan Box
Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, 4" round flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Used independently of vapor barrier hats. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Round polycarbonate, 4" diameter, 12.5 cubic inch black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70  pound fan, or 210 pound fixture. Saddle design straddles standard joist. Hands free installation. 1/2" setback. Two 1/2" knock outs on the side. 4 cable clamps, mounting hardware, instructions, and high strength, hardened screws included. 2-hour fire rating, UL Orange Book. UL Listed.
LED FLM TIP 4.8W/40W MED 3000K BENT TIP CAND COLD START LED  Allied 101550 EMT Electrical Conduit
Used in chandeliers, lanterns and sconces. Instant on to full brightness. Indoor, suitable for damp locations, dimmable. ETL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. 3000K, 25,000 average life hours. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
Raco 294 Ceiling Fan Box J-M 67488 Rigid Conduit Allied Moulded 9350-BHK Ceiling Box
Ceiling fan box, 4" octagon, 1 bottom 1/2" TKO knockout. 2-1/8" depth, 22.3 cubic inches. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be securely mounted flush. Ceiling fan rated, can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16" to 24". 4" diameter x 2-7/16" depth. Speed clamps, 50 lb. fixture rated. 2 hour wall and ceiling fire rated,  UL Listed.
BULB LED B10M BLUNT 27K 4.5W  J-M 67595 Rigid Conduit Sliderbox SB Adjustable Switch/Receptacle Outlet Box
For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability. 4" diameter x 2-3/4" width, 25 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. Fixture rating 50 pounds. UL Listed for 2 hour fire resistive walls and ceilings.
LED TORP TIP CAND 3W 827 2700K BLUNT TIP MED 3W 827 LED 2700K LED FLAME TIP 3W/25W MED 2700K
Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
Raco 926 Ceiling Fan Box BULB LED B10C BENT 27K 4.5W   BULB LED B10M BLUNT VINTGE 40W
Ceiling fan box with brace, 1-1/2" deep, 15.8 cubic inch box, for new work, to hang ceiling fans and light fixtures between joists or structural members safely and securely. Drawn construction. Maximum 70 pound fan or 90 pound fixture. Brace is adjustable form 16" to 24". Includes 2 end 1/2" knock outs. Acceptable for use in 2-hour fire rated walls and ceilings. UL Listed. For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life.
BULB LED B10M BENT VINTAGE 40W BULB LED B10C BLUNT VINTGE 40W J-M 67496 Rigid Conduit
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end.
LED FLAME TIP 4.5W MED 2700K  LED FLAME TIP 4.5W CAND 2700K LED FLM TIP CAND 4.5W 8505000K
Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
LED FLM TIP MED 4.5W 850 5000K TORP TIP MED 4.5W 850 LED2700K TORP TIP MED 4.5W 850 LED5000K
Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
LED FLAME TIP CAND 2.5W 2200K BLNT TIP CAND 4.5W 827LED2700K TORP TIP CAND 4.5W 850LED5000K
Chandelier. candelabra base. Used in chandeliers, lanterns and sconces. Indoor, suitable for damp locations, dimmable. Instant on to full brightness. ETL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. Energy Star Approved. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
LED FLM TIP CAND 4.5W 8275000K BULB LED G25 VINTAGE 4.5W/40W 4 WATT 2700K B10 BENT DIM MED
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Indoor and outdoor use. 15,000 hours average life. For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life.
J-M 67587 Rigid Conduit LED FLM TIP CAND 6W 850 5000K LED FLAME TIP MED 6W 850 5000K
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
LED TORP TIP MED 6W 827 2700K LED TORP TIP MED 6W 850 5000K LED TORP TIP CAND 6W 827 2700K
Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
LED TORP TIP CAND 6W 850 5000K LED FLAME TIP 6W/60W DIM 2700K BULB LED FILAMENT 25W EQUIV
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
BULB LED B10 DIM 3.5W 2700K   BULB LED B10 DIM 4.5W 2700K   LED FLM TIP CAND 6W 827 2700K
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
Allied 101568 EMT Conduit J-M 67579 Rigid Conduit Raco 936 Ceiling Fan Box with Support
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. Ceiling fan box with brace, 1-1/2" deep, 15.8 cubic inch capacity. Used to hang ceiling fans and light fixtures between joists or structural members safely and securely in old work applications where access is limited. Brace allows simple expansion, adjustable form 16" to 24". Recommended support load for ceiling fan is 35 pounds, for fixtures is 50 pounds. 4 half inch side, three bottom knock outs. Mounting hardware with high strength, hardened screws and instructions included. Acceptable for use in 2-hour rated walls and ceilings. UL Listed.
BULB LED FILAMENT 60W EQUIV   Saf-T-Brace 0101000 Brace Ceiling Fan Box J-M 67561 Rigid Conduit
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. For remodel or new construction. Applications fits 16" to 24" ceiling joists, fits all ceiling fans, and installs without going into the attic. Includes a heavy duty 15.5 cubic inch 1-1/2" deep dual mount box and mounting hardware. Maximum load rating for ceiling fans: 70 pounds, fixtures 100 pounds. Support fan brace has locking screws and teeth. Each end screws into joist independently, with 4 teeth and single screw on each end. 8-32 threads for lightweight fixtures, 10-24 threads for ceiling fans. Six 1/2" Romex or conduit knockouts. UL Listed. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end.
LED FLM TIP CAND 3.8W DIM2700K J-M 67504 Rigid Conduit Allied 103051 Rigid Conduit
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
Allied 101576 EMT Conduit J-M 67512 Rigid Conduit Allied 103069 Rigid Conduit
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
Allied 101584 EMT Conduit J-M 67553 Rigid Conduit Allied 101592 EMT Conduit
High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3. Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. High grade mild strip steel, hot galvanized with a process that combines zinc, a conversion coating, and a clear organic polymer top-coat to form a triple layer of protection against corrosion and abrasion, has a low friction ID coating that improves the slip properties between conduit and wire. It provides easy bending, cutting and joining while resisting flattening, kinking and splitting. Reduces electromagnetic fields, effectively shielding computers and sensitive electronic equipment from the electromagnetic interference caused by power distribution systems. UL Listed, meets ANSI C80.3.
J-M 67546 Rigid Conduit Allied 103077 Rigid Conduit Allied 109085 Rigid Conduit
Safe, non-conductive. Used to protect electrical wiring in aboveground and underground applications. Easy to install. Will not rust or corrode. Compatible with ENT fittings with the use of ENT cement. Furnished in standard 10' lengths with one bell end. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
Allied 103093 Rigid Conduit Allied 103101 Rigid Conduit Allied 103119 Rigid Conduit
High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1. High-strength mild steel, impact and crush resistant, ductile for long life and easy bending. Provides radiation protection and magnetic shielding. Hot-dipped galvanized with a smooth baked on lacquer coating inside and out for high grade, durable pipe protection. With one coupling. 10 foot length. Listed to Safety Standard UL 6. Manufactured in accordance with ANSI C80.1.
   
 
1