Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > UTILITY POWER OUTLETS
Sort By:
1
Hubbell 860 Raised Blank Utility Box Cover Hubbell 864 Utility Box Cover Hubbell 865 Utility Box Cover
Steel box cover, blank with no knockouts. 2-5/16" wide x 4-3/16" tall. UL Listed. Steel box cover for duplex receptacle. Rugged construction. 2-5/16" wide x 4-3/16" tall. UL Listed. Steel box cover with single toggle switch opening in the center. 2-5/16" wide x 4-3/16" tall. UL Listed.
Hubbell 8752 Square Flat Blank Electrical Box Cover Hubbell 722 Octagon Flat Blank Electrical Box Cover Carlon HB1BL Blank Handy Box Cover
Rugged construction, used to close an outlet box. 4" square. Angled mounting slots allow for correction of box misalignment. UPC bar code. UL Listed. Rugged construction, used to close an outlet box. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 1/2" knockout. 4.3" length x 2.38" width. UL Listed.
Carlon HB1GF Handy Outlet Box Cover Carlon HB1SW Handy Box Cover Carlon HB1DP Handy Box Cover
Made of a durable polycarbonate material that is virtually indestructible. 4.3" x 2.38". UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 4.3 length x 2.38 width. UL Listed. Made of a durable polycarbonate material that is virtually indestructible. 4.3" length x 2.38" width. UL Listed.
Hubbell 863 Utility Box Cover Hubbell 861 Utility Box Cover Hubbell 8753 Square Flat Electrical Box Cover
Steel box cover with single 1.406" receptacle opening in the center. Rugged construction. 2-5/16" wide x 4-3/16" tall. UL Listed. Steel box cover with 1/2" knockout in the center. 2-5/16" wide x 4-3/16" tall. UL Listed. Steel box cover with single 1/2" knockout in the center. 4" square. Angled mounting slots allow for correction of box misalignment. UL Listed.
Hubbell 724 Octagon Flat Electrical Box Cover Thomas & Betts B520A-UPC Ceiling Box Hubbell 8772 Square Raised Device Box Cover
Steel box cover with single 1/2" knockout in the center. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. With captive nails. 3/0 - 4/0 combination. Fixture spacing for 2-3/4" - 3", 6 integral clamps. 4" diameter non-metallic ceiling box, 20 cubic inch volume. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. Meets NEMA OS-2, UL Listed. RoHS Compliance. Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed.
Hubbell 703 Round Flat Ceiling Pan Cover Carlon E460R-CAR Blank Round Outlet Box Cover Carlon A400R-CAR Square Blank Electrical Box Cover
Steel box cover with 1/2" knockout in the center. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. High impact lightweight round blank PVC cover for 4" round boxes to make junctions. UL Listed. Two gang blank rise. Carlon blue color.
Raco 8768 Mud-Ring Raised Square Electrical Box Cover Carlon A420RR Raised Tubing Electrical Box Cover Carlon A410R-CAR Square Electrical Box Cover
Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed. Suitable for paneling masonry, plaster, sheetrock, tile and all wall coverings. Brilliant electric blue. UL Listed. Suitable for tile, plaster, sheetrock, paneling, masonry and all wall coverings. Brilliant electric blue. UL Listed.
Hubbell 127 Octagon Box Raco 787 Mud-Ring Flat Square Electrical Box Cover Raco 8756 Raised Square Open Electrical Box Cover
Two 1/2" and two 3/4" conduit knockouts (sides). Two 1/2" and two 3/4" conduit knockouts (bottom). No bracket. Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Steel box cover, used to mount switch or receptacle. UL Listed. Raised device cover. Used to hang light fixture from 4" square box. Not designed for ceiling fan support. Angled mounting slots allow for correction of box misalignment. Raised 5/8" - ears 2-3/4" - 4 cubic inches. UL Listed. UPC bar coded.
Raco 871 Wall Plate BOX OCTAGON 4IN 1-1/2IN DEEP  Carlon A471RR Round Tubing Ceiling Box Extender with Round Cover
Two device switch box cover. Made from unpainted, pregalvanized steel. Used with  2 toggle 2 gang switch boxes. UL 514-A Listed, File E195978 / CSA Listed, File LR-1082. Four 1/2" conduit knockouts (sides). Four 1/2" conduit knockouts (bottom). No bracket. Used in the installation of ceiling or wall lighting fixtures or as a junction box. 1-1/2" deep, 15.5 cubic inch capacity. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Half inch raised round high impact lightweight PVC. Used with nonmetallic sheathed cable in octagon boxes. Supports 50 pounds. UL Listed.
Raco 727 Raised Octagon Open Electrical Box Cover Hubbell 731 Octagon Flat Electrical Box Cover Raco 832 Blank Flat Square Electrical Box Cover
Used to hang light fixture from 4" octagon box or 4" round ceiling pan. Not designed for ceiling fan support. Key-hole mounting feature allows for installation of cover without removing box screws. Raised 5/8" - 3.8 cubic inch capacity. UL Listed. Steel box cover for one duplex receptacle. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Rugged construction, used to close an outlet box. Key hole mounting feature allows for installation of cover without removing box screws. 4-11/16" square. UL Listed.
Raco 791 Mud-Ring Flat Square Electrical Box Cover Hubbell 8778 Square Raised Device Box Cover MUD RING 4SQ SINGLE RAISED 3/4
Steel box cover, 4", used to mount two switches or receptacles. UL Listed. Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed.
Raco 8769 Mud-Ring Raised Square Electrical Box Cover Carlon B518A-UPC Ceiling Box Carlon A615DE-CAR Flexible Raceway Ceiling Box
Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. With captive nails. 18 cubic inch volume. Listed for fixture support up to 50 lb. 3" diameter x 2-3/4" depth. Meets NEMA OS-2, UL Listed. Safe, non-conductive. Quick connect. 20.5 cubic inch capacity. Knockouts 1/2" x 3/4". 4" diameter x 2-1/8" depth.
Hubbell 907C Square Exposed Work Cover Hubbell 146 Octagon Box Thomas & Betts B618RR Ceiling Box
Used to mount two duplex receptacles on a box in surface mount application. Raised 1/2". 6-1/2 cubic inch capacity. 4" square. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Used in the installation of ceiling or wall lighting fixtures or as a junction box. 1-1/2" deep, 15.5 cubic inch capacity. 50 pound maximum recommended static load. Not designed for ceiling fan support. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Round old work box with 4 integral swing clamps. Three zip mount retainers. High temperature resistant. 4-1/4" diameter x 2-3/4" depth. UL Listed.
Raco 729 Flat Octagon Electrical Box Cover Carlon B520P-UPC Ceiling Box Hubbell 902C Square Raised Exposed Work Cover
Steel box cover for single toggle switch. Key hole mounting feature allows for installation of cover without removing box screws. UL Listed. Ceiling box with captive nails, ground lug and screw attached. Fixture spacing for 2-3/4" and 3-1/2". 6 integral clamps. Listed for fixture support up to 50 lb. 4" diameter x 2-1/4" depth. UL Listed. Meets NEMA OS-2. For one duplex receptacle. Raised 1/2". 6-1/2 cubic inch capacity. 4" square. UL Listed.
Raco 8779 Mud-Ring Raised Square Electrical Box Cover Carlon Super Blue BH525A-UPC Ceiling Box Raco 110 Electrical Box
Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. Rigid polycarbonate box used for decorative light fixtures or low voltage devices. Made of a heat resistant thermoplastic material that is lightweight, noncorrosive and nonconductive. Captive nails, 25 cubic inch, 3" deep, large capacity boxes are perfect for specialty lighting, track lighting, or smoke/security devices. Listed for fixture support up to 50 lb. Includes mounting hardware. UL Listed. Octagon box, 3-1/2" with four 1/2" side conduit knockouts and one 1/2" bottom conduit knockout. Drawn construction, can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 1-1/2" deep, 11.8 cubic inch capacity. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code.
Hubbell 833 Square Flat Electrical Box Cover Hubbell 803C Square Exposed Work Cover Raco 800C Raised Square Exposed Work Cover
Steel box cover with single 1/2" knockout in the center. 4-11/16" square. UL Listed. Raised 1/2". For two toggle switches. 6-1/2 cubic inch capacity. UL Listed. Used to mount one toggle switch on box in surface mount applications. Raised 1/2". 6-1/2 cubic inch capacity. UL Listed.
Carlon E980CN-CAR Blank Weatherproof Cover Raco 915C Raised Square Exposed Work Cover Raco 809C Raised Square Exposed Work Cover
Fits Carlon single gang FS boxes. Paintable surface with textured finish to hide scratches. Stainless steel mounting screws and gasket included. UL, CSA Listed. For one GFCI receptacle and one duplex receptacle. 6.5 cubic inch capacity. UL Listed, CSA Listed. For two GFCI receptacles. 6.5 cubic inch capacity. UL Listed, CSA Listed.
Hubbell 130 Octagon Box Extension Ring Raco 906C Surface Mount Exposed Work Cover Carlon Super Blue BH614R Old Work Ceiling Fan Box
Two 1/2" and two 3/4" conduit knockouts (sides). Extension rings provide a means for adding additional cubic capacity or as and outlet box for surface conduit. For one each duplex receptacle and toggle switch. 4" square. Raised 1/2". 6.5 cubic inch capacity. UL Listed. Spring metal mounting brackets. Fixture rating limit of 10 pounds. Heat resistant. 3-1/2" diameter round old/new work box base, ears and snap-in bracket. UL Listed.
Raco 8292 Ceiling Pan Box Raco 161 Drawn Electrical Box Carlon Super Blue BH525P Ceiling Box
Non-metallic sheathed cable wiring system. Clamps in bottom. Four cable knockouts, one 1/2" conduit. 3-1/2" diameter x 1/2" depth. UL Listed. Drawn metal 4" octagon box used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. Maximum recommended support load for a  static fixture is 50 lb. TS bracket for wood or metal studs features gauging tabs and recessed nailing spurs. 1-1/2" depth, 1/2" bracket setback, three 1/2" side knockouts, five 1/2" bottom knockouts. 15.5 cubic inch capacity. Combination screw heads allow for fast cover or fixture installation. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Combination ceiling box, hard shell with captive nails and grounding lug. 3" depth. Listed for fixture support up to 50 lb. 4.062" diameter x 3" depth. UL Listed.
Hubbell 8293 Ceiling Pan Box Carlon CPC4WH Blank Round Flat Outlet Box Cover Raco 808C Raised Square Exposed Work Cover
Five 1/2" bottom conduit knockouts, 6 cubic inch capacity. Acceptable for use in 2-hour rated walls and ceilings. 4" diameter x 1/2" depth. UL Listed. Non-metallic white ceiling box cover, flat and blank. 4" diameter. UL Listed. Raised 1/2". Used to support switches or receptacles independent of the box (box must still be used). 6.5 cubic inches. UL Listed.
Hubbell 167 Octagon Box Raco 810C Raised Square Exposed Work Cover Carlon E365C-CAR Blank Round Weatherproof Cover
Two 1/2" and two 3/4" conduit knockouts (sides). Three 3/4" and two 1/2" conduit knockouts (bottom). No bracket. Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2". For one 30-50 amp, single receptacle, 2.141" diameter. 6-1/2 cubic inch capacity. 4" square. UL Listed. Round non-metallic gray weatherproof cover. Fits T boxes.
Thomas & Betts B620KR-UPC Ceiling Box Allied Moulded 9351-NK Outlet Box Raco 111 Extension Ring Ceiling Outlet Box
Ceiling box with 14.38"-22.5" adjustable bar hanger. 4" diameter x 2-1/4" depth. Fixture spacing for 2-3/4" and 3-1/2". Integral clamps. Listed for fixture support up to 50 pounds. UL Listed. Ceiling box with nails, speed clamps. 50 lb. fixture rated. 2 hour wall and ceiling fire rating classification. 4" diameter x 2-3/8" depth. UL Listed. Extension rings provide a means for adding 11.8 additional cubic capacity to a box or as an outlet box for surface conduit. Not designed for ceiling fan support. Four 1/2" conduit knockouts on the sides. 50 pound maximum recommended static load. Acceptable for use in 2-hour rated walls and ceilings. 1-1/2" deep x 11.8 cubic inches. UL Listed.
Carlon E9802CN-CAR Blank Square Weatherproof Cover Raco 175 Ceiling Outlet Box BOX OCT 4IN 1-1/2DP NM CLAMP
UV resistant, suitable for outdoor use. For use in wet or damp locations, UL Marine Listed. Non-metallic, non-corrosive, will not rust or fade. Fits two gang metallic and non metallic boxes. Includes stainless steel mounting screws and gasket. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 2-1/8" deep, 21.5 cubic inch capacity. UL Listed. With non-metallic sheathed cable clamps. With ear brackets. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. 1-1/2" deep, 15.5 cubic inch capacity. Acceptable for use in 2-hour fire rated walls. UL Listed.
Raco 164 Electrical Box Raco 780 Mud-Ring Raised Square Electrical Box Cover Hubbell 160 Octagon Box
Four cable pryouts and one 1/2" KO side, one - 1/2" KO bottom. Octagon boxes are used in the installation of ceiling or wall light fixtures. TS bracket features gauging tabs and recessed nailing spurs, for wood or metal studs. Acceptable for use in 2-hour fire rated walls and ceilings. 1-1/2" deep - 15.5 cubic inches. UL Listed. UPC bar code. Used to close outlet box. For mounting switches or receptacles. Size 4", UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed.
Raco 112 Electrical Box Raco 295 Ceiling Fan Box Thomas & Betts B708-SHK Ceiling Pan Box
With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Octagon boxes can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 1-1/2" deep, 11.8 cubic inch capacity. UL Listed, acceptable for use in 2-hour fire rated walls. Ceiling fan 4" round pan, 1/2" deep, 6 cubic inches, 5 bottom 1/2" knockouts. Used for new work and renovations. Ceiling fan rated, used in the installation of heavy light fixtures or ceiling fans. Maximum 70 pound fan or 150 pound fixture. Includes nonmetallic sheathed cable connector, mounting hardware, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Shallow ceiling fan outlet box with mounting screws. 1 integral clamp. Non-conductive high impact lightweight PVC. 5 knock outs, 8 cubic inch capacity. For new work or renovations. Mounts ceiling fan securely to the ceiling joist. Rated for fans up to 35 pounds and fixture up to 50 pounds. 4" diameter x 5/8" depth. UL Listed.
Carlon B620HG-UPC Ceiling Box Carlon Super Blue BH525H Ceiling Box Saf-T-Cap 0105000 Outlet Ceiling Fan Box
Non-metallic sheathed cable clamps. Ceiling box with 14 -1/4" - 23-1/2" adjustable bar hanger. Fixture spacing for 2-3/4" and 3-1/2". 4" diameter x 2-1/4" depth. Ground lug and screw. 6 integral clamps. Listed for fixture support up to 50 lb. UL Listed, meets NEMA OS-2. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. 4" diameter x 2.95" depth. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and clamps to make installation faster. Listed for fixture support up to 50 lb. Hanger bar adjusts from 11-1/2" to 18-1/2". UL Listed. For new construction or applications where attic is accessible. Fits all ceiling fans. Maximum load rating for ceiling fans is 70 pounds. 100 pounds for fixtures. 8-32 threads for lightweight fixtures, 10-24 threads for ceiling fans. 3 knockouts for conduit or Romex. 2 Romex clamps. 1-1/2" deep, 15.5 cubic inch capacity. Includes SAF-T-CAP and mounting screws. UL Listed.
Raco Romex 176 Electrical Box Thomas & Betts B720R-SHK Ceiling Fan Box Raco 296 Ceiling Fan Box
With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts, (sides). One 1/2" conduit knockout, (bottom). Can be used in the installation of ceiling or wall lighting fixtures or as a junction box. Not designed for ceiling fan support. 50 pound maximum recommended static load. J side-mount bracket with spurs and holes for toe-nailing, for wood studs or joists. UPC bar code. UL Listed. Non-conductive high impact lightweight PVC. Full 20 cubic inch capacity. 6 integral clamps. 4" diameter x 2-1/4" depth. Used for new work or renovations. Rated for fans up to 35 pounds and fixture up to 50 pounds. Mounts fan to a cross member secured between ceiling joist. Mounting screws included. UL Listed. Ceiling fan box, 4" octagon, 1-1/2" deep. 3 bottom 1/2" knockouts. Used in new work and renovations. Ceiling fan rated octagon boxes can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed.
Carlon Super Blue BH525HP Ceiling Box Raco 8325 Ceiling Outlet Box 4W 2175K B10 360L DIM MED CLRD
Ceiling box with hanger bar, adjusts from 11-1/2" to 18-1/2". Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Listed for fixture support up to 50 lb. 4" diameter x 3" depth. UL Listed. Ground lug included. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 pound maximum recommended support load. Furnished with 3/8"-18 NPS trade size fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. 1-1/2" deep - 15.5 cubic inches. Indoor and outdoor use. 15,000 hours average life.
Raco 878 Utility Exposed Work Cover Raco 8326 Ceiling Outlet Box Thomas & Betts BH525L Ceiling Fan Box
Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2". For one 30-50 amp, single receptacle 2.141" diameter. 10.3 cubic inch capacity. UL Listed. With non-metallic sheathed cable clamps. Two 1/2" conduit knockouts and four cable knockouts (sides). Used to hang light fixtures between joists or structural members. Includes 4" octagon box. Not designed for ceiling fan support. 10 lb. maximum recommended support load. Furnished with 3/8"-18 NPS fixture stud. Bar hanger is adjustable from 14-1/4" to 22-1/2". Box is adjustable along entire length of bar. Acceptable for use in 2-hour fire rated walls. UL Listed. UPC bar code. New work ceiling fan box with nails and metal brace for stud finishing. Rated for fans up to 35 pounds and fixtures up to 50 pounds. 4.062" diameter x 3.06" depth. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wire capacity, and comes with molded-in nailing flanges. UL Listed.
Raco 2027-FBAR Round Vapor Barrier Box Raco 888 Raised Square Exposed Work Cover Raco 7120 Ceiling Fan Box
Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, 4" round flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Used independently of vapor barrier hats. Used to mount switch or receptacle on box in surface mount applications. Raised 1/2". For one 30-60 amp, single receptacle 2.625" diameter. 10.3 cubic inches. UL Listed. Round polycarbonate, 4" diameter, 12.5 cubic inch black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70  pound fan, or 210 pound fixture. Saddle design straddles standard joist. Hands free installation. 1/2" setback. Two 1/2" knock outs on the side. 4 cable clamps, mounting hardware, instructions, and high strength, hardened screws included. 2-hour fire rating, UL Orange Book. UL Listed.
LED FLM TIP 4.8W/40W MED 3000K BENT TIP CAND COLD START LED  6.5W 2200K A19 VIN DIM MED AMB
Used in chandeliers, lanterns and sconces. Instant on to full brightness. Indoor, suitable for damp locations, dimmable. ETL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. 3000K, 25,000 average life hours. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Indoor and outdoor use. 15,000 hours average life.
Raco 294 Ceiling Fan Box Allied Moulded 9350-BHK Ceiling Box BULB LED B10M BLUNT 27K 4.5W
Ceiling fan box, 4" octagon, 1 bottom 1/2" TKO knockout. 2-1/8" depth, 22.3 cubic inches. Used in new work and renovations. Features FA bracket for wood studs or joists, which allows box to be securely mounted flush. Ceiling fan rated, can be used in the installation of heavy light fixtures or ceiling fans. Recommended support load for ceiling fan is 70 pounds, for fixtures is 150 pounds. Includes non-metallic sheathed cable connector, mounting hardware, high strength hardened screws, and instructions. Acceptable for use in 2-hour rated walls and ceilings. UL Listed. Four inch round ceiling box with universal bar hanger, adjustable bar assembly from 16" to 24". 4" diameter x 2-7/16" depth. Speed clamps, 50 lb. fixture rated. 2 hour wall and ceiling fire rated,  UL Listed. For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life.
LED A19 MED VINT 4W/60W 2200K COVER 3GANG RAISED 3/4 BOX 952 Sliderbox SB Adjustable Switch/Receptacle Outlet Box
Traditional appearance and modern technology. Clear, medium base. Instant on to full brightness, suitable for damp locations. UL Listed, FCC Compliant and Mercury free. Raised gang box device covers/rings are used in finish wall applications to mount switches or receptacles. Raised 3/4" for commercial wall applications. Additional keyholes allow device covers to also fit next smaller box (example: A 3-gang cover will fit a 2 or 3 gang box). 8.88" x 4.5" x .75". Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability. 4" diameter x 2-3/4" width, 25 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. Fixture rating 50 pounds. UL Listed for 2 hour fire resistive walls and ceilings.
LED TORP TIP CAND 3W 827 2700K BLUNT TIP MED 3W 827 LED 2700K LED FLAME TIP 3W/25W MED 2700K
Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
Raco 926 Ceiling Fan Box BULB LED ST19 DIM 4.5W 2700K  BULB LED A15C VINTAGE 4.5W/40W
Ceiling fan box with brace, 1-1/2" deep, 15.8 cubic inch box, for new work, to hang ceiling fans and light fixtures between joists or structural members safely and securely. Drawn construction. Maximum 70 pound fan or 90 pound fixture. Brace is adjustable form 16" to 24". Includes 2 end 1/2" knock outs. Acceptable for use in 2-hour fire rated walls and ceilings. UL Listed. Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life.
BULB LED B10C BENT 27K 4.5W   BULB LED B10M BLUNT VINTGE 40W BULB LED B10M BENT VINTAGE 40W
For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life.
6.5W 22K ST19 VIN DIM MED CLRD BULB LED B10C BLUNT VINTGE 40W COVER 4GANG RAISED 3/4 BOX 953
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Raised gang box device cover used in finish wall applications to mount switches or receptacles. Raised 3/4" for commercial wall applications. Additional keyholes allow device covers to also fit next smaller box (example: A 4-gang cover will fit a 3 or 4 gang box). 10.69" x 4.5" x .75".
ST19 MED VINT 4.2W LED2200K CL LED FLAME TIP 4.5W MED 2700K  LED FLAME TIP 4.5W CAND 2700K
Traditional appearance and modern technology. Clear, medium base. Instant on to full brightness, suitable for damp locations. UL Listed, FCC Compliant and Mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
LED FLM TIP CAND 4.5W 8505000K LED FLM TIP MED 4.5W 850 5000K TORP TIP MED 4.5W 850 LED2700K
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
TORP TIP MED 4.5W 850 LED5000K LED FLAME TIP CAND 2.5W 2200K BLNT TIP CAND 4.5W 827LED2700K
Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Chandelier. candelabra base. Used in chandeliers, lanterns and sconces. Indoor, suitable for damp locations, dimmable. Instant on to full brightness. ETL Listed, FCC Compliant, RoHS Compliant, 100 percent mercury free. Energy Star Approved. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
TORP TIP CAND 4.5W 850LED5000K LED FLM TIP CAND 4.5W 8275000K Feit A19/DM/800/GU24/L Dimmable LED Lamp
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Instant on to full brightness, indoor, suitable for damp locations. Use in table and floor lamps, ceiling fans, wall sconces. 120 volts, 4.5" MOL x 2.5"D. 25,000 average hours. UL/CUL Listed, FCC and RoHS Compliant, Mercury free.
A19 GU24 850 9.9W/60W DIM5000K BULB LED A15 VINTAGE 4.5W/40W 4 WATT 2700K B10 BENT DIM MED
Instant on to full brightness, indoor, suitable for damp locations. Use in table and floor lamps, ceiling fans, wall sconces. 120 volts, 4.5" MOL x 2.5"D. 25,000 average hours. UL/CUL Listed, FCC and RoHS Compliant, Mercury free. Indoor and outdoor use. 15,000 hours average life. For indoor use. Replacement for traditional incandescent B10 decorative light bulbs. 2700K, 80 CRI. 15,000 hours average life.
LED FLM TIP CAND 6W 850 5000K LED FLAME TIP MED 6W 850 5000K LED TORP TIP MED 6W 827 2700K
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D.
LED TORP TIP MED 6W 850 5000K LED TORP TIP CAND 6W 827 2700K LED TORP TIP CAND 6W 850 5000K
Performance LED. Average life of 15,000 hours. Instant on to full brightness, suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
LED FLAME TIP 6W/60W DIM 2700K BULB LED FILAMENT 25W EQUIV   BULB LED ST19 DIM 6.5W 2700K
Flame tip LED chandelier bulb. Performance medium base. Average life of 15,000 hours. Instant on to full brightness. Suitable for damp locations. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.3"H x 1.35"D. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. Indoor and outdoor use. 15,000 hours average life.
BULB LED B10 DIM 3.5W 2700K   BULB LED B10 DIM 4.5W 2700K   LED FLM TIP CAND 6W 827 2700K
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
MUD RING 4SQ SINGLE RAISED 1/4 BULB LED ST19 FILAMENT 27K 40W Raco 936 Ceiling Fan Box with Support
Used to close outlet box. For mounting switch or receptacle. Size 4" x 4",steel, UL Listed. Indoor and outdoor use. 15,000 hours average life. Ceiling fan box with brace, 1-1/2" deep, 15.8 cubic inch capacity. Used to hang ceiling fans and light fixtures between joists or structural members safely and securely in old work applications where access is limited. Brace allows simple expansion, adjustable form 16" to 24". Recommended support load for ceiling fan is 35 pounds, for fixtures is 50 pounds. 4 half inch side, three bottom knock outs. Mounting hardware with high strength, hardened screws and instructions included. Acceptable for use in 2-hour rated walls and ceilings. UL Listed.
BULB LED FILAMENT 60W EQUIV   Saf-T-Brace 0101000 Brace Ceiling Fan Box LED FLM TIP CAND 3.8W DIM2700K
Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free. For remodel or new construction. Applications fits 16" to 24" ceiling joists, fits all ceiling fans, and installs without going into the attic. Includes a heavy duty 15.5 cubic inch 1-1/2" deep dual mount box and mounting hardware. Maximum load rating for ceiling fans: 70 pounds, fixtures 100 pounds. Support fan brace has locking screws and teeth. Each end screws into joist independently, with 4 teeth and single screw on each end. 8-32 threads for lightweight fixtures, 10-24 threads for ceiling fans. Six 1/2" Romex or conduit knockouts. UL Listed. Candelabra screw base (E12). For indoor use. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant. 100 percent mercury free.
Raco 807C 2-Hole Raised Square Exposed Work Cover Raco 804C Blank Raised Square Exposed Work Cover Raco 830C 1-Hole Raised Square Exposed Work Cover
For two receptacles. Two 1.406 diameter holes. 6.5 cubic inch capacity. UL Listed, CSA Listed. Used to close outlet box, blank, no holes on face. 4" square, 6.5 cubic inch capacity. UL 514-A Listed, CSA Listed. For one receptacle, 2.480" diameter hole. 6.5 cubic inch capacity. UL Listed, CSA Listed.
Raco 831C 1-Hole Raised Square Exposed Work Cover POWER OUTLET 50A 14-50R CON PK POWER OUTLET 30AMP R32U CON PK
For one duplex and one 20 amp twist-lock, 1.620" diameter hole. 6.5 cubic inch capacity. UL Listed, CSA Listed. Temporary RV power outlet is factory-assembled and factory-tested. Ready to use with no need to assemble individual parts. Single, heavy-gauge welded flange NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs and breakers. All-in-one construction for factory assured terminations. Rolled edge door for cord protection. Manufactured from heavy G-90 zinc coated steel which resists corrosion and fading. Complies with National Electrical Code and OSHA requirements. 7" height x 5.5" width x 5.25" depth, 4.06 lb. Temporary RV power outlet is factory-assembled and factory-tested. Ready to use with no need to assemble individual parts. Single, heavy-gauge welded flange NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs and breakers. All-in-one construction for factory assured terminations. Rolled edge door for cord protection. Manufactured from heavy G-90 zinc coated steel which resists corrosion and fading. Complies with National Electrical Code and OSHA requirements. 5.5" height x 7.5" width x 9.75" depth, 6.525 lb.
Connecticut PS-13-HR Weatherproof Power Outlet Panel Connecticut PS-54-HR Weatherproof Power Outlet Panel POWER PANEL RV 70A 50/20A GFCI
Factory wired and completely assembled. Suitable for use with aluminum or copper wire. Cover design allows cord to be used when door is closed. 30 amp, 120 volt. 6-1/8" x 5-3/8" x 4-3/4". TT-30R NEMA receptacle. NEMA 3R weatherproof enclosure. Safe and easy to install. Factory wired and completely assembled. Suitable for use with aluminum or copper wire. Unique cover design allows cord to be used when door is closed. 50 amp, 120/240 volt. 6-18" x 5-3/8" x 4-3/4". 14-50R NEMA receptacle. NEMA 3R weatherproof enclosure. Unmetered RV outlet box. Rugged 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (Power Outlets).
POWER PANEL RV 100A 50/30/20A Allied Moulded 9344 Blank Square Outlet Box Cover POWER PEDESTAL BURIAL RV 100A
Unmetered RV outlet box. Rugged 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (Power Outlets). Made of fiberglass, covers a 4" H9343-NK junction box. UL Listed. Unmetered earth burial pedestal with 50 amp, 30 amp and 20 amp GFCI circuit protected receptacles. 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (power outlets). 19.125" height x 9" width x 3.5" depth, 47 lb.
POWER PEDESTAL/METER RV 100A
Ring-type metered earth burial pedestal with 50 amp and 30 amp GFCI circuit protected receptacles. 16-gauge zinc coated G-90 steel, with electro-deposition finish, resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. All terminals accept copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (power outlets). 19.125" height x 9" width x 3.5" depth, 59 lb.
   
 
1