Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > DISCONNECT BOXES
Sort By:
1
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Thomas & Betts BH122A-UPC Outlet Box Carlon B112HB Handy Box Hubbell 8660 Utility Box
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cubic inch rigid wall. 3-7/8" x 2-3/8" x 3-3/4". UL Listed. PVC handy box used for many wiring applications. Weather-resistant and nonconductive. Will accept metal handy box covers or nonmetallic covers. Includes hardware for quick, easy installation. Used for convenience outlets, switch boxes or small junction boxes. Drawn construction and raised grounding provision. Acceptable for use in 2-hour rated walls. Six 1/2" knockouts (sides). Two 1/2" knockouts (ends). Two 1/2" knockouts (bottom). 4" x 2" x 1-7/8" deep. 13.0 cubic inch capacity. UL Listed.
Thomas & Betts B114R-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box Hubbell 8192 Outlet Box
Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch,  2-3/4" x 2-1/4" x 4-1/8". UL Listed. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4". Conduit wiring system. Installed in ceilings or walls for lighting fixtures, switches or receptacles. Used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Drawn construction and raised grounding provision for surface mount applications in ceilings or walls for lighting fixtures or receptacles. Eight 1/2"and four 3/4" conduit knockouts (sides). Two 1/2" and two 3/4" conduit knockouts (bottom). 4" square x 1-1/2" deep - 21.0 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. UPC bar code.
Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box
New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Safe, non-conductive. With bracket for 3/8" to 5/8" wallboard. Steel and wood studs, 4 knockouts. 2-15/16" depth x 3-3/4" x 2-1/4".
Allied Moulded 1098-N Switch Box Carlon B1EXT-CRD Electrical Box Thomas & Betts SC100RR Low Voltage Box
Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Extends an existing box by 1-1/8". Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4" x 3-1/4". UL Listed. For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18" depth x 2.18" x 3.05".
Raco 8190 Outlet Box Raco 8189 Ceiling Outlet Box Raco 7887RAC Old Work Cable Box
Used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Drawn construction and raised grounding provision for exposed work or surface mount applications. Combination cover screw heads provide for faster mudring/cover installation. Twelve 1/2" conduit knockouts (sides). Four 1/2" conduit knockouts (bottom). No bracket. 4" square x 1-1/2" deep - 21.0 cubic inches. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code. Welded square steel box, no bracket, installed in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices.  TKO 1/2" and 3/4" eccentric knockouts (Per U.L. 514-A, suitable for use without a bonding jumper in circuits above or below 250 volts).  Eight 1/2" and 4, TKO side knockouts, two 1/2" and 2 TKO bottom knockouts. Combination cover screw heads provide for faster mud ring/cover installation. UL 514-A Listed, File E195978. 21.0 cubic inch capacity. Acceptable for use in 2-hour rated walls. Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3" depth. 14.0 cubic inch capacity. UL Listed.
Allied Moulded 1099-N Switch Box Hubbell 8650 Welded Utility Box Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box
Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Welded design allows for more working room inside box. Six 1/2" knockouts (sides). Two 1/2" knockouts (ends). Three 1/2" knockouts (bottom). Acceptable for use in 2-hour rated walls. UL Listed. Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed.
Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box Raco 8196 Electrical Box Cooper S1174W-SP Ceiling Receptacle Lampholder
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed. Six 1/2" and 3 TKO conduit knockouts (sides). Three 1/2" and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mudring/cover installation. FM bracket mounts flat on side of stud and provides a rigid, secure box installation. Square boxes are installed in ceiling or walls for lighting fixture or receptacles. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Molded of high-temperature, thermoset plastic. Mounts on 4" outlet boxes with breakout for 3.25"  box mounting. 4 top wire screws. Terminal screws backed out. Meets all UL 496 requirements. 250 volt, 660 watts.
Eagle 604-SP Ceiling Receptacle Lampholder Hubbell 8670 Welded Utility Box Thomas & Betts B120R Outlet Box
Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts. Welded design allows for more working room inside box. Six 1/2" knockouts (sides). Two 1/2" knockouts (ends). Three 1/2" knockouts (bottom). Acceptable for use in 2-hour rated walls. UL Listed. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
Raco 662 Drawn Utility Box Raco 653 Utility Box Raco 8197 Welded Electrical Box
Handy box, used for convenience outlet, switch box or small junction box. Three 1/2" knockouts (sides). Two 1/2" knockouts (ends). Three 1/2" knockouts (bottom). "TS" bracket for wood or metal studs. Gauging tabs and recessed nailing spur. 4" x 2" x 1-7/8" deep. 13.0 cubic inches. Used to add additional wiring capacity to handy box. Six 1/2" knockouts (sides). Two 1/2" knockouts (end). 4" x 2" x 1-1/2" deep. 11.5 cubic inches. UL, CSA Listed. Square 4" steel box for lighting fixtures, switches or receptacles where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 1-1/2" deep. 21.0 cubic inch capacity. Welded, with six 1/2" and three TKO  side knockouts, three 1/2" and two TKO  bottom knockouts. Flush FH bracket type for side mount of stud and features hooks that drive into face of wood stud for hands-free installation. UL Listed.
Thomas & Betts BH235A Outlet Box Carlon A521DE ENT Flexible Raceway Outlet Box Hubbell 665 Utility Box Extension Ring
PVC handy box used for many wiring applications. Weather-resistant and nonconductive. Will accept metal handy box covers or nonmetallic covers. 35 cubic inch rigid wall. Non-metallic. Non-conductive. Suitable for masonry walls. 4" x 4" x 1-1/2". 1/2" and 3/4" knockouts. UL Listed. Used to add additional wiring capacity to handy box. Six 1/2" knockouts (sides) and two 1/2" knockouts (ends). 4" x 2" x 1-7/8" deep. 13.0 cubic inch capacity. UL Listed.
Carlon SC100A 1-Gang Low Voltage Mounting Bracket Hubbell 8663 Utility Box Raco 473 Gangable Switch Box
Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73" x 2.32". Drawn construction and raised grounding provision for surface mount applications. Four 3/4" knockouts (sides). Two 3/4" knockouts (ends). One 3/4" knockout (bottom). 4" x 2" x 1-7/8" deep. 13.0 cubic inch capacity. UL Listed. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With nonmetallic sheathed cable clamps. Acceptable for use in 2-hour fire rated walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). 1/2" conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work.  2-1/4" deep - 10.5 cubic inches. UL Listed.
Hubbell 8232 Outlet Box Carlon SC200RR Low Voltage Old Work Bracket Raco 528 Gangable Switch Box
Conduit wiring system. Eight 1/2" and four TKO conduit knockouts (sides). Two 1/2" and two TKO conduit knockouts (bottom). 4" square x 2-1/8" deep, 30.3 cubic inch capacity. Combination cover screw heads provide for faster mudring/cover installation. No bracket, installed in ceilings or walls for lighting fixtures and receptacles. Acceptable for use in 2-hour rated fire walls. With UPC bar code. UL Listed. For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Hubbell 8500 Gangable Switch Box Carlon B418A-UPC Shallow Outlet Box Thomas & Betts B225R-UPC Outlet Box
Conduit wiring system. Four 1/2" conduit knockouts (sides). Two 1/2" conduit knockouts (end). Two 1/2" conduit knockouts (bottom). Less clamps. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed. With mounting ears and 2 swing clamps. Suitable for masonry walls, UL Listed, not UL Classified for fire resistance. 2-3/4" depth x 3-1/8" x 3-15/16"
Allied Moulded LH Keyless Lamp Holder With Terminal Screw Raco 661 Handy Box Raco 400 Gangable Switch Box
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Three 1/2" knockouts (sides). 4" x 2" x 1-7/8" deep. 13.0 cubic inch capacity. "A" style bracket for wood or metal, positions handy box securely against face and side of stud. Acceptable for use in 2-hour rated walls. UL Listed. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. 1-1/2" deep - 7.5 cubic inches. UL Listed.
Thomas & Betts B121ADJ Wall Box Thomas & Betts B344AB-UPC Outlet Box Hubbell 519 Gangable Switch Box
Provides simple installation and allows adjustment from 0 to 1-3/4" with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3-3/8" depth x 3-7/8" x 3-3/4". Permissible for use with 90 degree C connectors. Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C. With captive nails and bracket support, twelve integral clamps, six each side. 44 cubic inch capacity,  2-11/16" depth x 3-3/4" x 5-5/8". Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls.
Hubbell 8531 Gangable Switch Box Raco 404 Non-Gangable Shallow Switch Box Hubbell 471 Gangable Switch Box
Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed. Shallow switch box, made for use with furring strips and 1/4" paneling. Welded, with nonmetallic sheathed cable clamps. Two cable knockouts (end). One 1/2"' conduit knockout (end). D bracket for wood or metal studs. 1/4" bracket setback. 1" deep - 6.5 cubic inches. UL Listed. Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2-hour rated walls. Four cable knockouts (end). One 1/2" conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. UL Listed.
Hubbell 410 Non- Gangable Switch Box Carlon B117RSW Old Work Shallow Outlet Box Allied Moulded 9318 Handy Box
Four cable knockouts on the end. 3" x 2" x 1-1/2" deep. 7.5 cubic inches. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. UL Listed. Shallow box, flanged, non-metallic and non-conductive. 2" depth x 4-1/4" width x 4" length. Thermoset-fiberglass handy box. Surface mounted, with side and bottom romex cable openings. 2" depth x 2-1/4" width x 4-3/16" height. UL Listed.
Raco 420 Gangable Switch Box Raco 560 Gangable Switch Box Raco 8355 Non-Gangable Switch Box
Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. Four 1/2" conduit knockout (sides). Two 1/2" conduit knockout (end). Two 1/2" conduit knockouts (bottom). 2" deep - 10.0 cubic inches. UL Listed. For conduit. 3" x 2" switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14.0  cubic inch capacity, 2-3/4" deep, four 1/2" side knockouts, two 1/2" bottom knockouts and two 1/2" end knockouts. Acceptable for use in 2-hour rated fire walls. UL Listed. Four cable knockouts (ends). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8", with bumps. Angle nail type. 3" x 2" x 2-27/32" deep, 15.8 cubic inch capacity. Prepositioned mounting nails included. Acceptable for use in 2-hour rated walls. UL Listed.
Raco 674 Handy Box Raco 8201 Extension Ring Outlet Box Raco 7488RAC Old Work Cable Box
For convenience outlets, switch boxes or small junction boxes for exposed work applications. 4" x 2", with four 3/4" conduit knockouts (sides), two 3/4" conduit knockouts (bottom) and two 3/4" knockouts (end). 4" height x 2" width x 2-1/8" deep. 16.5 cubic inch capacity. Welded design allows for more working room inside box. UL Listed. For adding additional cubic capacity or as an outlet box for surface conduit. Twelve 1/2" side knockouts, drawn metal, suitable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep, 22.5 cubic inch capacity. UL Listed. Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32" depth. 25.0 cubic inch capacity.
Allied Moulded 9363-EWK Old Work Switch Box Raco 567 Gangable Switch Box Hubbell 8203 Electrical Box Extension Ring
Thermoset-fiberglass with ears, wing brackets, speed clamps. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. 3" x 2" x 2-3/4" deep. 14.0 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. For adding additional cubic capacity or as an outlet box for surface conduit. Eight 1/2" and four 3/4" conduit knockouts (sides). 4" square x 1-1/2" deep. 22.5 cubic inches. UL Listed.
Thomas & Betts B432A-UPC Outlet Box Raco 976 Extension Ring Switch Box Thomas & Betts BH353A Lightweight Outlet Box
With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed. Add-A-Depth ring used to correct for a 3" x 2" switch box or 4" square box (2 needed) set too deep in a wall. Adjustment range 1/4" to 1", two 1-1/8" long screws included. UPC bar code. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box.
Thomas & Betts SC200DV Dual Voltage Outlet Box Allied Moulded 9361-ESK Old Work Switch Box Hubbell 518 Gangable Switch Box
Enables line voltage and low-voltage to run to the same location. Uses standard 2 gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69" x 4.04". 20.5 cubic inch capacity. UL approved. Thermoset-fiberglass with ears, snap bracket, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. One 1/2" bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. 2-1/2" deep - 12.5 cubic inches. UL Listed. UPC bar coded.
Thomas & Betts B232B-UPC Outlet Box Raco 223 Electrical Box Carlon Super Blue BH118R Old Work Outlet Box
With bracket for 3/8" to 5/8" wallboard steel or wood stud mounting and 8 integral clamps, 4 each side. 3-3/4" x 4" x 3". Four cable knockouts (sides). Two 1/2" and one TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. FM flush side-mount bracket for wood or metal studs. Square boxes are installed in ceilings or walls for lighting fixtures or receptacles. Acceptable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 2.41". UL Listed.
Raco 529 Gangable Switch Box Carlon A122 ENT Flexible Raceway Outlet Box Raco 545 Non-Gangable Old Work Switch Box
Four cable knockouts (end). Two 1/2" conduit knockouts, (end). One 1/2" conduit knockout (bottom). "LB" bracket for wood studs, 5/8" offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed. Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53" height x 2.10" width x 3.25" depth. Four cable knockouts (end). Two 1/2" knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Raco 8211 Outlet Box Allied Moulded 2300-NK Switch Box Raco 508 Non-Gangable Switch Box
Four cable knockouts (sides). Four 1/2" and two TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. Square boxes are used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 4" square x 1-1/2" deep - 21.0 cubic inches. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code. Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed. Two 1/2" conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4" sheetrock maximum thickness. Acceptable for use in 2-hour fire rated walls. 12.5 cubic inches. 3" x 2" x 2-1/2" deep. UL Listed.
Hubbell 8257 Welded Outlet Box Raco 487 Gangable Old Work Switch Box Raco 8601 Gangable Switch Box
Conduit wiring system. Two 1/2" and twelve TKO conduit knockouts (sides). One 1/2", three TKO conduit knockouts (bottom). No bracket, installed in ceilings or walls for lighting fixtures or receptacles. 4-11/16" square x 2-1/8" deep - 42.0 cubic inches. Combination cover screw heads provide for faster mudring/cover installation. UPC bar code. UL Listed. Four cable knockouts (end). One 1/2" conduit knockout (bottom). Clamp screws through beveled corners. With clamps for non-metallic sheathed cable. Adjustable plaster ears allow box to be used in old work applications. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic cable clamps in each end. 3" x 2" x 3-1/2" deep. 18.0 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. UL Listed.
Raco TigerGrip 523 Gangable Old Work Switch Box Carlon Super Blue BH234R Old Work Outlet Box Thomas & Betts B355R Outlet Box
One 1/2" bottom knockout. Four cable knockouts. 2-1/2" deep x 12.5 cubic inches. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2-hour rated walls. UL Listed. UPC bar coded. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 4.17". UL Listed. Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13" x 6.25" x 8". UL Listed.
BULB LED A19 DIM 5.5W 2700K   BULB LED A19 DIM 5.5W 5000K   Raco 2011FBAR Vapor Barrier Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs.
Sliderbox SB Adjustable Switch/Receptacle Outlet Box Raco 8235 Electrical Box 5 WATT 2700K A19 DIM MED BASE
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cubic inch volume, 1/2" knockout. Internal steel, stud/wood screws. 3-9/16" depth x 2-1/4" width x 3-3/4" height. UL Listed for 2 hour fire resistive walls and ceilings. Installed flush in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Combination cover screw heads for faster mud ring/cover installation. TS bracket for wood or metal studs, features gauging tabs and recessed nailing spurs. Fixture support of 6 lb. maximum. 30.3 cubic inch capacity 4" square x 2-1/8" depth with 6 eccentric 1/2" and 3 TKO side knockouts and 3 eccentric 1/2" and 2 TKO bottom knockouts. Acceptable for use in 2-hour fire rated walls. UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED6A19DIM 6/40W 27K 470L FRST Raco 605 Gangable Switch Box Eagle 659-SP Ceiling Receptacle Lampholder
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). 3" x 2" x 3-1/2" deep. 18.0 cubic inches. With clamps for non-metallic sheathed cable. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. UL Listed. Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.
8.5 WATT 27K A19 DIM MED BASE Carlon B455A-UPC Outlet Box Arrow Hart 669-SP Lampholder with 2 Wire Outlet
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2" depth x 3-7/10" x 7-3/5". With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts.
Arrow Hart S865W-SP Lampholder with 2 Wire Outlet Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box Thomas & Betts E981DFN-CTN Rigid Type FSC FS Switch Box
Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity.
Raco 8265 Ceiling Outlet Box BULB LED A19 DIM 9W 5000K     Thomas & Betts E980EFN-CTN Rigid Type FSC FS Switch Box
Conduit wiring system. Welded, with conduit knockouts. Four 3/4" and four 1" conduit knockouts (sides). One 1/2" conduit knockout and three TKOs (bottom). 4-11/16" square x 2-1/8" deep. 42.0 cubic inches. Installed in ceilings or walls for lighting fixtures or receptacles. UPC code. UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed.
Thomas & Betts E980DFN-CTN Rigid Type FSC FS Switch Box Allied Moulded LH Lamp Holder Thomas & Betts B234ADJ Wall Box
Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3" depth x 5-5/8" x 3-5/8". Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C.
Cooper 667-SP Ceiling Receptacle Lampholder Thomas & Betts E981EFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts BH464A Rigid Outlet Box
With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts. Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation.
LED10A19DIMO930UB 3K800L FRSTD LED10A19DIM 10/60W 27K 800L   Allied Moulded 9312-EWK Old Work Outlet Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Thermoset-fiberglass, with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-3/4" depth x 4-1/8" x 3-1/4". 2 hour wall fire rating. UL Listed.
Arrow Hart S759W-CD-SP Lampholder Allied Moulded 3300-NK Outlet Box Carlon E982DFN-CTN Type FS Rigid Switch Box
Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts. Thermoset-fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 5-11/16" x 3-3/4". UL Listed. For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity.
BULB LED A19 DIM 4.5W 2700K   Tiger Grip 517 Gangable Switch Box Cooper GU24W-SP Keyless Lampholder
Indoor and outdoor use. 15,000 hours average life. Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. UL Listed. Molded of high-temperature, thermoset plastic. Mounts on 4" (101.6mm) outlet box with knockouts for 3.25" (82.5mm) box mounting.  Comes with 6" pigtail leads that are 221 degrees F (105 degrees C) insulated standard number 18 AWG wire, stripped 0.75" (19.0mm). 660 watts, 250 volts AC. ROHS compliant. File E7182, cULus, Evaluated to UL496.
Carlon E982EFN-CTN Type FSS Rigid Switch Box BULB LED A15 DIM 4.5W 2700K   Raco 680 Switch Box
For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity. Indoor and outdoor use. 15,000 hours average life. Four inch square, drawn metal box, suitable for use in 2-hour fire rated walls. Conduit wiring system. Twelve 1/2" conduit knockouts (sides). Five 1/2" conduit knockouts (bottom). 2-1/8" deep - 30.3 cubic inches. UL Listed.
Raco 681 Switch Box Carlon B468R Old Work Outlet Box Carlon E9802DR Type FSE Rigid Switch Box
Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2" conduit knockouts (sides). Five 1/2" conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4" square. 2-1/8" deep - 30.3 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cubic inch capacity, 3.41" depth x 7.57" x 2.89". For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cubic inch capacity. UL Listed.
Raco 8240 Electrical Box BULB LED A19 DIM 4.5W 2200K   Carlon E9802E-CTN Type FS Rigid Switch Box
Four cable knockouts (sides). Two 1/2" and one eccentric TKO conduit knockout (sides). One 1/2" conduit knockout (bottom). 2-1/8" deep. 30.3 cubic inches. With clamps for non-metallic sheathed cable. TS, flush side-mount bracket for wood or metal studs. Fixture support of 6 pounds maximum. Acceptable for use in 2-hour rated fire walls. UL Listed. Indoor and outdoor use. 15,000 hours average life. For dead-end terminations where two devices or additional wiring capacity is required. Integral mounting feet. 32 cubic inch capacity. Type 2FSE UL Listed.
Raco 685 Switch Box Thomas & Betts E381DR Type T Weatherproof Switch Box Hubbell 683 Switch Box
Drawn construction for surface mount applications. Six 3/4" side knockouts, three 1/2" and two 3/4" bottom knockouts. TS bracket for wood or metal studs. 1/2" bracket setback eliminating the need for a plaster ring. 4" square. Acceptable for use in 2-hour rated walls and ceilings. 2-1/8" deep - 30.3 cubic inches. UL Listed. Weatherproof, for use with nonmetalic wiring systems. Nonconductive, noncorrosive, and impact resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2" threaded ports, one on each end and one in the back. UL Listed. Drawn construction for surface mount applications. Conduit wiring system. Eight 1/2" and four 3/4" conduit knockouts (sides). Three 1/2" and two 3/4" conduit knockouts (bottom). 4" square. 2-1/8" deep - 30.3 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Raco 2002FBAR Vapor Barrier Box Allied Moulded LH Lamp Holder With Grounded Outlet Carlon E981FFN-CTN Type FSC Rigid Switch Box
Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity.
BULB LED A19 DIMMBLE 12W 2700K Carlon Adjust-A-Box MB238ADJ Adjustable Switch Box Sliderbox SB Adjustable Switch/Receptacle Outlet Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. 3-9/16" depth x 4" width x 3-3/4" height. UL listed for 2 hour fire resistive walls.
A15 4.8W/40W MED DIM LED 3000K A19 10.5W/60W MED DIM LED3000K LED12A19DIMO930UB 3K1100L FRST
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED12A19DIM 12/75W 2700K 1100L LED12A19DIM 12/75W 5000K 1100L Allied Moulded 9313-EWK Old Work Switch Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Thermoset-fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" depth x 5-15/16" x 3-1/4". UL Listed.
BULB LED DIMM A19 G2 90CRI 1CD Area Lighting CPGI-ALR-LC-120 Photocontrol Raco 509 Old Work Switch Box
High-CRI, dimmable, 9.8 watts, 120 volts, 2700K, medium base LED is a direct replacement for 60 watt incandescent and meets the latest requirements of the California Energy Commission. CRI of 90 and average life of 25,000 hours. UL Listed, RoHS and FCC Compliant and mercury free. Energy Star Approved. 4.5"H x 2.3"D. Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. Conduit wiring system. Gangable switch box offers the option of constructing a box to hold two or more devices. Adjustable plaster ears allow box to be used in old work applications. Provided old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Two 1/2" bottom knockouts and two 1/2" end knockouts. 2-1/2" deep - 12.5 cubic inches. UL Listed.
A19 10W COLD START LED 3000K  LED A15 827 2.5W/25W DIM 2700K Cooper 545B-BOX Lampholder
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness.25000 hours average life. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. For pole barns.
Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol BULB LED DECO CHANDLIER 40W EQ BULB LED DECO CHANDLIER 40WEQ
Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Torpedo tip, Candelabra E12 base, 180 degree beam angle. 11,000 hours average life. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant and mercury free. Torpedo tip, Candelabra E12 base, 180 degree beam angle. 11,000 hours average life. Instant on to full brightness. UL/CUL Listed, FCC and RoHS Compliant and mercury free.
AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control SENSOR PHOTO TWIST/LOCK ASSY  LED A15 827 4.5W/40W DIM 2700K
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7". Twist-lock light sensor. Turns lights on at dusk and off at dawn. 1000 watt capacity. 120 volts. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
LED A15 E26 850 4.5W/40W 5000K Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol A15 827 4.5W/40W CAND LED2700K
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
A15 E17 4.5W 827 DIM LED 2700K A15 CAND 850 4.5W/40W LED5000K BULB LED A19 E26 10.6W 5K PHTO
Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Non-dimmable. Built-in sensor, automatically turns on at night and off during the day. 800 Lumen. Instant on to full brightness. No additional hardware needed. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.4"H x 2.35"D.
GE Electrical TFN60RCP AC Disconnect Switches A15 E26 827 4.5W/40W LED 2700K Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol
Steel enclosure. 2 pole, 3 wire, 240 volt AC, rated 10 HP. For central air conditioner. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. 4-3/4" x 7-1/2" x 2". UL1429 enclosure pullout switch, UL Listed. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant.
AmerTac 758M Post Eye Light Control AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control Thomas & Betts E382DE Type T Threaded Switch Box
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt. For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65". For use with nonmetalic wiring systems. Nonconductive, noncorrosive, and impact resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2" plus four 3/4" threaded ports. UL Listed.
AmerTac 758FPCTCC-4 Dawn Light Control Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control LED A15 827 6W/60W DIM 2700K
AmerTac Dawn Light Control, 1800 W, 15 A, Dusk On - Dawn OFF Timing Range, 1100 VA Ballast, Lighting Control Control, Wire-In Connection, 5.4 in Overall Height, 3.6 in Overall Width, 2.1 in Overall Depth, Plastic, Includes: Bi-Metal Switch, 3-Wire, Infrared Technology, For Outdoor, Incandescent, Fluorescent, mercury vapor and Sodium Bulbs Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35". Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
LED A15 MED E26 850 DIM 5000K Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol A15 827 6W/60W CAND LED 2700K
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
A15 E12 CAND 6W DIM LED 5000K Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol Eaton DPU222RP Type ACD Non-Fusible Pullout Disconnect Switch
For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed. Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separately. #14-3 AWG wire range. 5-3/8" x 8-3/4" x 3-1/8". UL Listed file No.E5239.
Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol
For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed. Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed.
Raco 686 Switch Box LED A19 MED 850 7W FROST 5000K A19 MED 850 7W CLEAR LED 5000K
Welded construction. Conduit wiring system. Two 1/2" and two 3/4" knockouts (sides). Three 1/2" and three 3/4" knockouts (bottom). Six 1/2" and six 3/4" knockouts (end). FM type bracket for wood or metal studs. 2-1/2" deep - 47.8 cubic inches. UL Listed. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
BOX 3GANG 1-5/8DEEP 1/2-3/4 KO A15 E17 6W 827 DIM LED 2700K  A15 E12 CAND 6W DIM LED 2700K
Used where a number of wiring devices are to be centrally located. Features 1/2" and 3/4" concentric knockouts for use with a wide variety wiring methods. 1-5/8" x 4.5" x 8.63". UL Listed. Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
Siemens Energy WN2060U AC Disconnect Switches Cooper EA24 Mounting Arm and Hardware Cutler-Hammer DPF221RP AC Disconnect Switches
Single phase, 2 pole, 2 wire, 240 volt, rated 10 HP, steel enclosure. All lugs positioned for bottom entry and exit wiring. Easy mounting for quick installation. Pullout head can be replaced in off position. 10,000 AIR. 12 - 3 AWG al, 14 - 3 kcmil cu lug wire range. 5-5/32" x 7-5/16" x 2-7/32". UL Listed. Extends light fixtures 24". Works with Cooper Lighting's NH Series mercury vapor lights, G Series and No.E70H high pressure sodium light fixtures. Includes mounting arm and hardware. Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved.
Heathco HZ-5690-AL Light Fixture Arm Extension Cutler-Hammer AC222URNMP-A2 AC Disconnect Switches Raco 687 Switch Box
Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length. Single phase, 2 pole, 2 wire, 240 volt AC. Rated 3 HP at 120 volt, 10 HP at 240 volt. For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. Swing-up cover remains in place when in open position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8-5/8" x 3-1/2". UL Listed file No. E5239. Conduit wiring system. Welded construction. FM bracket for wood or metal studs. Eight conduit knockouts (sides). Two conduit knockouts (end).  Four conduit knockouts (bottom). 63.5 cubic inch capacity. 7-19/32" wide x 2-1/2" deep. UL Listed.
GE Electrical TPN60R1 AC Disconnect Switches Carlon SC300PRR Electrical Box GE Electrical TF60RCP AC Disconnect Switches
Suitable for use as service entrance equipment. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. Designed to comply with code requirements for disconnecting central air conditioners and heat pumps. Open sides and top for quick installation. Impact and corrosion resistant GE Noryl thermoplastic resin. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. 5-3/4" x 8" x 3-1/8". UL1429 enclosed pullout switch, UL Listed. Nonmetallic ABS material is lightweight, paintable and easy to handle. Recessed low profile design provides ample room behind dry wall and between studs to accommodates cable bend requirements. Hides the wires, cables, cords and plug heads used with flat panel display installations. Has a two gang low voltage opening and a universal one gang opening for an outlet or switch box (boxes, devices, and plates not included). 4 swing out clamps lock the plate securely to the wall, horizontal or vertical mount. 2.72" depth x 5.25" width x 10.5" length. Steel enclosure. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. Uses cartridge fuses. For central air conditioner. Designed to comply with code requirements for disconnecting means within sight of central air conditioners and heat pumps. Removable closing cap not included. Equipment ground. 14-3 AWG lug wire range. 6-1/2" x 9" x 3-1/4". UL869 service equipment, UL Listed.
Westinghouse 7028500 Pendant Light Kit Westinghouse 7028400 Pendant Light Kit Westinghouse 7028700 Pendant Light Kit
Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included). Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included). Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included).
Westinghouse 7028600 Pendant Light Kit Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock Square D QO200TRCP Molded Non-Fusible Disconnect Switch
Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included). For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height. For use with 75 degree Celsius wire. 2 pole, 2 wire, 240 volt AC, rated 10 HP, steel enclosure with molded case. With reliable, quick-make, quick-break operating mechanism. Suitable for use on systems with up to 10,000 RMS symmetrical amp available fault current at 240 volt AC maximum when protected by a fuse or circuit breaker rated 60 amp or less. Does not contain overcurrent protection. Ground bar bonded to back. 4-5/8" x 6-1/2" x 3-7/8". UL Listed.
Bell 5638-5 Swivel Mount Photocontrol Cutler-Hammer DPF222RP AC Disconnect Switches LED A21 24W/150W MED DIM 5000K
Used for sunset activated automatic control of night lighting. Swivel switch, 1/2" NPT, 120 volt 50-60 HZ. Durable weatherproof construction. Built-in time delay to ignore auto headlamps or other temporary light flashes. Swivel switch, locknut. Fits with single lamp. 2000 watts. UL Listed. Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved. Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free.
LAMP LED SILVER WIRELESS      LAMP LED BRONZE WIRELESS      LAMP LED WHITE WIRELESS
Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included). Plastic, 60 lumens. Lightweight, durable and portable. Touching a finger to the top of the light turns it on and off. 3 "C" batteries (not included).
LED A21 24W/150W MED DIM 3000K LAMP LED LUX WIRELESS         Cutler-Hammer ACD221RNMP AC Disconnect Switches
Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free. Touch top operation. 100 lumens, 3 AA batteries (not included). Operates on a touch-activated, three-stage dimmer for varying levels of brightness. Single phase, 2 pole, 2 wire, 240 volt AC, non-metallic enclosure. Rated 1-1/2 HP at 120 volt, 3 HP at 240 volt with time delay fuses (uses class H cartridge fuses, not included). For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. 10,000 amp RMS symmetrical interrupting rating. Suitable for use as service entrance equipment with ground bar. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8.63" x 3.5". UL Listed file No. E5239.
PENDANT MINI BLK/BLK GLS 1LT  Eaton DPB222RP Type ACD Molded Non-Automatic Breaker Disconnect Switch PENDANT MINI BN W/CLR GLS 1LT
One-light adjustable mini pendant, black finish with hand blown black glass shade. 60-1/2" X 5". Contemporary design. 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed. Air conditioning disconnect, molded case switch looks like a circuit breaker but operates like an ordinary household light switch. 60 amp, 2-pole, 240 volt AC. Metallic, galvanized steel enclosure, NEMA 3R, rainproof. Packaged for retail sale. Wire size range Cu or Al at 60 or 70 degrees C: #14-3. UL Listed, CSA Approved. One-light indoor mini pendant classic retro design, brushed nickel finish with hand blown clear seeded glass shade. 60" X 7". Installation instructions and mounting hardware included. 50" maximum cord length. Uses 1 medium-base light bulb, 60 W maximum (not included) ETL/CETL listed.
PENDANT MINI BN/MTL SHADE 1LT