Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > SAFETY SWITCHES
Choose a sub category:
DIMMABLE DIMMABLE NON DIMMABLE
NON DIMMABLE
Sort By:
1
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Thomas & Betts BH122A-UPC Outlet Box Thomas & Betts B114R-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cubic inch rigid wall. 3-7/8" x 2-3/8" x 3-3/4". UL Listed. Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch,  2-3/4" x 2-1/4" x 4-1/8". UL Listed. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4".
Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box
New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Safe, non-conductive. With bracket for 3/8" to 5/8" wallboard. Steel and wood studs, 4 knockouts. 2-15/16" depth x 3-3/4" x 2-1/4".
Allied Moulded 1098-N Switch Box Carlon B1EXT-CRD Electrical Box Thomas & Betts SC100RR Low Voltage Box
Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Extends an existing box by 1-1/8". Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4" x 3-1/4". UL Listed. For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18" depth x 2.18" x 3.05".
Allied Moulded P241 Switch Box Raco 7887RAC Old Work Cable Box Allied Moulded 1099-N Switch Box
Residential thermoplastic switch or receptacle box. With angled nails. 3-9/16" depth x 2-1/4" width x 3-3/4" height. 24 cubic inch volume. Fire rating classification of 2 hours in wall and ceiling. UL Listed. Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3" depth. 14.0 cubic inch capacity. UL Listed. Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed.
BULB LED A19 40W EQUIV NON-DIM Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box BULB LED A19 60W EQUIV NON-DIM
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
BULB LED A19 60W EQUIV NON-DIM BULB LED A19 60W 800 LUM 5000K Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed.
Raco 8196 Electrical Box Raco 8197 Welded Electrical Box Thomas & Betts B120R Outlet Box
Six 1/2" and 3 TKO conduit knockouts (sides). Three 1/2" and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mudring/cover installation. FM bracket mounts flat on side of stud and provides a rigid, secure box installation. Square boxes are installed in ceiling or walls for lighting fixture or receptacles. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Square 4" steel box for lighting fixtures, switches or receptacles where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 1-1/2" deep. 21.0 cubic inch capacity. Welded, with six 1/2" and three TKO  side knockouts, three 1/2" and two TKO  bottom knockouts. Flush FH bracket type for side mount of stud and features hooks that drive into face of wood stud for hands-free installation. UL Listed. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
Thomas & Betts BH235A Outlet Box Carlon A521DE ENT Flexible Raceway Outlet Box Carlon SC100A 1-Gang Low Voltage Mounting Bracket
PVC handy box used for many wiring applications. Weather-resistant and nonconductive. Will accept metal handy box covers or nonmetallic covers. 35 cubic inch rigid wall. Non-metallic. Non-conductive. Suitable for masonry walls. 4" x 4" x 1-1/2". 1/2" and 3/4" knockouts. UL Listed. Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73" x 2.32".
Raco 473 Gangable Switch Box Carlon SC200RR Low Voltage Old Work Bracket Raco 528 Gangable Switch Box
Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With nonmetallic sheathed cable clamps. Acceptable for use in 2-hour fire rated walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). 1/2" conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work.  2-1/4" deep - 10.5 cubic inches. UL Listed. For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Hubbell 8500 Gangable Switch Box Carlon B418A-UPC Shallow Outlet Box Thomas & Betts B225R-UPC Outlet Box
Conduit wiring system. Four 1/2" conduit knockouts (sides). Two 1/2" conduit knockouts (end). Two 1/2" conduit knockouts (bottom). Less clamps. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed. With mounting ears and 2 swing clamps. Suitable for masonry walls, UL Listed, not UL Classified for fire resistance. 2-3/4" depth x 3-1/8" x 3-15/16"
Raco 400 Gangable Switch Box Thomas & Betts B121ADJ Wall Box Thomas & Betts B344AB-UPC Outlet Box
Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. 1-1/2" deep - 7.5 cubic inches. UL Listed. Provides simple installation and allows adjustment from 0 to 1-3/4" with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3-3/8" depth x 3-7/8" x 3-3/4". Permissible for use with 90 degree C connectors. Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C. With captive nails and bracket support, twelve integral clamps, six each side. 44 cubic inch capacity,  2-11/16" depth x 3-3/4" x 5-5/8". Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Hubbell 519 Gangable Switch Box Hubbell 8531 Gangable Switch Box Raco 404 Non-Gangable Shallow Switch Box
Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed. Shallow switch box, made for use with furring strips and 1/4" paneling. Welded, with nonmetallic sheathed cable clamps. Two cable knockouts (end). One 1/2"' conduit knockout (end). D bracket for wood or metal studs. 1/4" bracket setback. 1" deep - 6.5 cubic inches. UL Listed.
BULB LED 10YR 40W A19 27K 1PK BULB LED 10YR 40W A19 5K 1PK  BULB LED 10YR 60W A19 27K 1PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 60W A19 5K 1PK  BULB LED A19 10YR 41K 1PK 60W BULB LED A19 10YR 35K 1PK 40W
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 35K 1PK 60W BULB LED A19 FRSTED 8.5W 2700K Hubbell 471 Gangable Switch Box
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. LED light bulb, non-dimmable indoor/outdoor. Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2-hour rated walls. Four cable knockouts (end). One 1/2" conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. UL Listed.
Hubbell 410 Non- Gangable Switch Box Carlon B117RSW Old Work Shallow Outlet Box Raco 420 Gangable Switch Box
Four cable knockouts on the end. 3" x 2" x 1-1/2" deep. 7.5 cubic inches. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. UL Listed. Shallow box, flanged, non-metallic and non-conductive. 2" depth x 4-1/4" width x 4" length. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. Four 1/2" conduit knockout (sides). Two 1/2" conduit knockout (end). Two 1/2" conduit knockouts (bottom). 2" deep - 10.0 cubic inches. UL Listed.
Raco 560 Gangable Switch Box Raco 8355 Non-Gangable Switch Box Raco 7488RAC Old Work Cable Box
For conduit. 3" x 2" switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14.0  cubic inch capacity, 2-3/4" deep, four 1/2" side knockouts, two 1/2" bottom knockouts and two 1/2" end knockouts. Acceptable for use in 2-hour rated fire walls. UL Listed. Four cable knockouts (ends). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8", with bumps. Angle nail type. 3" x 2" x 2-27/32" deep, 15.8 cubic inch capacity. Prepositioned mounting nails included. Acceptable for use in 2-hour rated walls. UL Listed. Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32" depth. 25.0 cubic inch capacity.
Allied Moulded 9363-EWK Old Work Switch Box Raco 567 Gangable Switch Box Thomas & Betts B432A-UPC Outlet Box
Thermoset-fiberglass with ears, wing brackets, speed clamps. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. 3" x 2" x 2-3/4" deep. 14.0 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed.
Raco 976 Extension Ring Switch Box Thomas & Betts BH353A Lightweight Outlet Box Thomas & Betts SC200DV Dual Voltage Outlet Box
Add-A-Depth ring used to correct for a 3" x 2" switch box or 4" square box (2 needed) set too deep in a wall. Adjustment range 1/4" to 1", two 1-1/8" long screws included. UPC bar code. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box. Enables line voltage and low-voltage to run to the same location. Uses standard 2 gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69" x 4.04". 20.5 cubic inch capacity. UL approved.
Allied Moulded 9361-ESK Old Work Switch Box Hubbell 518 Gangable Switch Box Thomas & Betts B232B-UPC Outlet Box
Thermoset-fiberglass with ears, snap bracket, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. One 1/2" bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. 2-1/2" deep - 12.5 cubic inches. UL Listed. UPC bar coded. With bracket for 3/8" to 5/8" wallboard steel or wood stud mounting and 8 integral clamps, 4 each side. 3-3/4" x 4" x 3".
Raco 223 Electrical Box Carlon Super Blue BH118R Old Work Outlet Box Raco 529 Gangable Switch Box
Four cable knockouts (sides). Two 1/2" and one TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. FM flush side-mount bracket for wood or metal studs. Square boxes are installed in ceilings or walls for lighting fixtures or receptacles. Acceptable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 2.41". UL Listed. Four cable knockouts (end). Two 1/2" conduit knockouts, (end). One 1/2" conduit knockout (bottom). "LB" bracket for wood studs, 5/8" offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed.
Carlon A122 ENT Flexible Raceway Outlet Box Raco 545 Non-Gangable Old Work Switch Box BULB LED A19 75W EQUIV NON-DIM
Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53" height x 2.10" width x 3.25" depth. Four cable knockouts (end). Two 1/2" knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
Raco 8211 Outlet Box Allied Moulded 2300-NK Switch Box Raco 508 Non-Gangable Switch Box
Four cable knockouts (sides). Four 1/2" and two TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. Square boxes are used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 4" square x 1-1/2" deep - 21.0 cubic inches. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code. Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed. Two 1/2" conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4" sheetrock maximum thickness. Acceptable for use in 2-hour fire rated walls. 12.5 cubic inches. 3" x 2" x 2-1/2" deep. UL Listed.
Raco 487 Gangable Old Work Switch Box Raco 8601 Gangable Switch Box Raco TigerGrip 523 Gangable Old Work Switch Box
Four cable knockouts (end). One 1/2" conduit knockout (bottom). Clamp screws through beveled corners. With clamps for non-metallic sheathed cable. Adjustable plaster ears allow box to be used in old work applications. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic cable clamps in each end. 3" x 2" x 3-1/2" deep. 18.0 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. UL Listed. One 1/2" bottom knockout. Four cable knockouts. 2-1/2" deep x 12.5 cubic inches. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2-hour rated walls. UL Listed. UPC bar coded.
Carlon Super Blue BH234R Old Work Outlet Box Thomas & Betts B355R Outlet Box Raco 2011FBAR Vapor Barrier Box
Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 4.17". UL Listed. Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13" x 6.25" x 8". UL Listed. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs.
Sliderbox SB Adjustable Switch/Receptacle Outlet Box Raco 8235 Electrical Box Raco 605 Gangable Switch Box
Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cubic inch volume, 1/2" knockout. Internal steel, stud/wood screws. 3-9/16" depth x 2-1/4" width x 3-3/4" height. UL Listed for 2 hour fire resistive walls and ceilings. Installed flush in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Combination cover screw heads for faster mud ring/cover installation. TS bracket for wood or metal studs, features gauging tabs and recessed nailing spurs. Fixture support of 6 lb. maximum. 30.3 cubic inch capacity 4" square x 2-1/8" depth with 6 eccentric 1/2" and 3 TKO side knockouts and 3 eccentric 1/2" and 2 TKO bottom knockouts. Acceptable for use in 2-hour fire rated walls. UL Listed. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). 3" x 2" x 3-1/2" deep. 18.0 cubic inches. With clamps for non-metallic sheathed cable. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. UL Listed.
Carlon B455A-UPC Outlet Box Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box Thomas & Betts E981DFN-CTN Rigid Type FSC FS Switch Box
Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2" depth x 3-7/10" x 7-3/5". Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity.
Thomas & Betts E980EFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts E980DFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts B234ADJ Wall Box
Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed. Safe, non-conductive. For dead-end terminations. With integral mounting feet. Will not rust or corrode. 18 cubic inch capacity. UL Listed. Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3" depth x 5-5/8" x 3-5/8". Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C.
Thomas & Betts E981EFN-CTN Rigid Type FSC FS Switch Box Thomas & Betts BH464A Rigid Outlet Box BULB LED 10YR 40W A19 27K 2PK
Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 40W A19 5K 2PK  BULB LED 10YR 60W A19 27K 2PK BULB LED 10YR 60W A19 5K 2PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
Allied Moulded 9312-EWK Old Work Outlet Box Allied Moulded 3300-NK Outlet Box BULB LED A19 40W EQUIV NON-DIM
Thermoset-fiberglass, with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-3/4" depth x 4-1/8" x 3-1/4". 2 hour wall fire rating. UL Listed. Thermoset-fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 5-11/16" x 3-3/4". UL Listed. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
BULB LED A19 40W EQUIV NON-DIM Carlon E982DFN-CTN Type FS Rigid Switch Box BULB LED A19 100W EQUIV 3000K
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
Tiger Grip 517 Gangable Switch Box Carlon E982EFN-CTN Type FSS Rigid Switch Box BULB LED A19 60W EQUIV NON-DIM
Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. UL Listed. For multiple dead-end circuit terminations or where additional support is required in stub-up applications. Takes standard covers and accessories or devices. 18 cubic inch capacity. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 60W EQUIV NON-DIM BULB LED A19 8.5/60W EQ NON-DM Raco 681 Switch Box
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2" conduit knockouts (sides). Five 1/2" conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4" square. 2-1/8" deep - 30.3 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed.
Carlon B468R Old Work Outlet Box BULB LED A19 10YR 35K 1PK 75W BULB LED A19 10YR 27K 1PK 75W
Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cubic inch capacity, 3.41" depth x 7.57" x 2.89". Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 5K 1PK 75W  Carlon E9802DR Type FSE Rigid Switch Box Raco 8240 Electrical Box
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. For dead-end terminations where two devices or additional wiring capacity is required. Safe, non-conductive, will not rust or corrode. Integral mounting feet provide easy mounting. Type 2FSE. 32 cubic inch capacity. UL Listed. Four cable knockouts (sides). Two 1/2" and one eccentric TKO conduit knockout (sides). One 1/2" conduit knockout (bottom). 2-1/8" deep. 30.3 cubic inches. With clamps for non-metallic sheathed cable. TS, flush side-mount bracket for wood or metal studs. Fixture support of 6 pounds maximum. Acceptable for use in 2-hour rated fire walls. UL Listed.
Carlon E9802E-CTN Type FS Rigid Switch Box Raco 685 Switch Box Thomas & Betts E381DR Type T Weatherproof Switch Box
For dead-end terminations where two devices or additional wiring capacity is required. Integral mounting feet. 32 cubic inch capacity. Type 2FSE UL Listed. Drawn construction for surface mount applications. Six 3/4" side knockouts, three 1/2" and two 3/4" bottom knockouts. TS bracket for wood or metal studs. 1/2" bracket setback eliminating the need for a plaster ring. 4" square. Acceptable for use in 2-hour rated walls and ceilings. 2-1/8" deep - 30.3 cubic inches. UL Listed. Weatherproof, for use with nonmetalic wiring systems. Nonconductive, noncorrosive, and impact resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2" threaded ports, one on each end and one in the back. UL Listed.
Raco 2002FBAR Vapor Barrier Box Carlon E981FFN-CTN Type FSC Rigid Switch Box Carlon Adjust-A-Box MB238ADJ Adjustable Switch Box
Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Safe, non-conductive, takes standard covers and accessories. For through terminations. With detachable mounting feet. 19 cubic inch capacity. Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed.
BULB LED A19 75W EQUIV NON-DIM BULB LED A19 75W EQUIV NON-DIM Sliderbox SB Adjustable Switch/Receptacle Outlet Box
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. 3-9/16" depth x 4" width x 3-3/4" height. UL listed for 2 hour fire resistive walls.
6.5W 2200K A19 VIN DIM MED AMB Allied Moulded 9313-EWK Old Work Switch Box LED A19 MED VINT 4W/60W 2200K
Indoor and outdoor use. 15,000 hours average life. Thermoset-fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" depth x 5-15/16" x 3-1/4". UL Listed. Traditional appearance and modern technology. Clear, medium base. Instant on to full brightness, suitable for damp locations. UL Listed, FCC Compliant and Mercury free.
BULB LED ST19 DIM 4.5W 2700K  BULB LED A15C VINTAGE 4.5W/40W BULB LED A19 FRST 35K 1PK 100W
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 FRST 27K 1PK 100W BULB LED A19 FROST 5K 1PK 100W BULB LED 10YR 40W A19 27K 4PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 6/40W A19 5K    BULB LED 10YR 60W A19 27K 4PK BULB LED 10YR 60W A19 5K 4PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 35K 4PK 40W BULB LED A19 10YR 35K 4PK 60W BULB LED A15 40W EQUIV NON-DIM
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant.
LED A1540C 5W/40W CAND 3000K  A15 5W/40W 850 CAND LED 5000K 6.5W 22K ST19 VIN DIM MED CLRD
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Indoor and outdoor use. 15,000 hours average life.
ST19 MED VINT 4.2W LED2200K CL BULB LED A15 VINTAGE 4.5W/40W A19 10.5W/60W MED 12V LED3000K
Traditional appearance and modern technology. Clear, medium base. Instant on to full brightness, suitable for damp locations. UL Listed, FCC Compliant and Mercury free. Indoor and outdoor use. 15,000 hours average life. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 100W EQUIV NONDIM BULB LED A19 100W EQUIV NONDIM Thomas & Betts E382DE Type T Threaded Switch Box
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. For use with nonmetalic wiring systems. Nonconductive, noncorrosive, and impact resistant for a safe, long, service-free life in exposed applications. Install in accordance with NEC and local codes. Three 1/2" plus four 3/4" threaded ports. UL Listed.
A1560C 850 6.5W CAND LED 5000K LED A15 6.5W/60W MED 3000K    LED A15 6.5W/60W CAND 3000K
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D.
BULB LED ST19 DIM 6.5W 2700K  LED A19 MED 3.6W/40W FRO 2700K LED A19 3.6W/40W MED 2700K CLR
Indoor and outdoor use. 15,000 hours average life. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
Raco 686 Switch Box BULB LED ST19 FILAMENT 27K 40W LED A19 MED 7W/60W FROST 2700K
Welded construction. Conduit wiring system. Two 1/2" and two 3/4" knockouts (sides). Three 1/2" and three 3/4" knockouts (bottom). Six 1/2" and six 3/4" knockouts (end). FM type bracket for wood or metal studs. 2-1/2" deep - 47.8 cubic inches. UL Listed. Indoor and outdoor use. 15,000 hours average life. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
LED A19 MED 7W/60W CLEAR 2700K A19 9.5W/60W MED E26 LED 3000K Raco 687 Switch Box
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Conduit wiring system. Welded construction. FM bracket for wood or metal studs. Eight conduit knockouts (sides). Two conduit knockouts (end).  Four conduit knockouts (bottom). 63.5 cubic inch capacity. 7-19/32" wide x 2-1/2" deep. UL Listed.
Square D L211N Safety Switches Carlon SC300PRR Electrical Box BULB LED A19 10YR 27K 4PK 75W
Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. Typical uses include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. 5.00" x 7.63" x 4.00". UL Listed, meets NEMA standard KS1. Nonmetallic ABS material is lightweight, paintable and easy to handle. Recessed low profile design provides ample room behind dry wall and between studs to accommodates cable bend requirements. Hides the wires, cables, cords and plug heads used with flat panel display installations. Has a two gang low voltage opening and a universal one gang opening for an outlet or switch box (boxes, devices, and plates not included). 4 swing out clamps lock the plate securely to the wall, horizontal or vertical mount. 2.72" depth x 5.25" width x 10.5" length. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 5K 4PK 75W  BULB LED A19 10YR 35K 4PK 75W Square D L111N Fusible Light Duty Safety Switch
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Single phase, 1 pole, 2 wire, solid neutral, 120/240 volt AC. Rated 2 HP at 120 volt AC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. 5.00" x 7.63" x 4.00".
Cutler-Hammer DP221NGB Safety Switches BULB LED A19 FRST 27K 4PK 100W BULB LED A19 FROST 5K 4PK 100W
Steel enclosure. 2 pole, 3 wire, general duty safety switch, plug fuse type, (Type S, T, OR W) fusible with neutral NEMA 1. 120/240 volt rating. 1/2 HP at 120 volt, 1-1/2 HP at 240 volt. Does not have an interlock to prevent opening when switch is in the on position. UL Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 FRST 35K 4PK 100W BULB LED 7W A60 CWHT          Square D D211NCP Safety Switches
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Luemx LED Bulb, 7 W, 120 VAC, E26/E27, 940000 hr Average Life, Cool White, CRI >80, 3500 K Color, 130 deg Beam, 60 mm Dia, 115 mm Length, 50 - 60 Hz Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC. With metallic enclosure for indoor use. Designed to open or close an electrical circuit in general duty applications. Rated 1-1/2 HP. For residential or commercial applications. For PK3GTA-1 field installable service ground bar kit. With plug type fuse protection. Lugs suitable for aluminum or copper conductors. Spring reinforced plated copper fuse clips. ANSI Certified and UL Listed.
Square D L221N Safety Switches Siemens Energy LF211NU Safety Switches BULB LED 8W A19 CWHT 300K
Single phase, 2 pole, 3 wire (2 blades, fuseholders and 1 neutral), 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. 10,000 AIC (short circuit rating) with class H cartridge fuses. NEMA type 1 enclosure. Terminal lug data: (1) #12 - 6 Al or #14 - 6 Cu. wire. Service ground bar kit PKGTA1 sold separately. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt. 10,000 AIC with plug fuses (not included). Metallic enclosure. Rated 1-1/2 HP standard/3 HP maximum. Compact size, quick-make, quick-break mechanism. Suitable for use as service entrance equipment. Cover interlock. Bottom cable entry and exit only, no hub provision supplied. Padlocking provision to lock cover closed or to lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. #14-6 AWG line, #14-8 load lug wire ranges. 5-1/2" x 8-1/4" x 5-13/16". UL Listed file No.E4776, NEMA type GD, meets federal specifications WS865C. Luemx LED Bulb, Series: LGP, 4 W, 85 - 265 VAC, A19 Bulb, Medium Screw (E26), 550 lumens, Cool White, CRI >70, 300 K Color, 120 deg Beam, 60 mm Dia, 123 mm Height, UL Listed, Plastic and Aluminum
Cutler-Hammer DG221NGB Safety Switches GE Electrical TG3221R Spec-Setter Safety Switches Murray LNF222RU Non-Fusible Lever Safety Switch
Steel enclosure. 2 pole, 3 wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 volt AC. Rated 1-1/2 to 3 HP single phase, 3 to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6" x 7-1/2" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1. Designed for residential or light commercial applications where duty is not severe. Meets or exceeds NEMA Enclosed Switch Standard KS1-1983 for type GD, CSA certified; 60 degrees C/75 degrees C conductor rating. Two pole, 120/240 volt AC; 250 volt DC. Removable closing cap. Accepts Class H fuses (not included). Feature quick make, quick break mechanism. Suitable for use as service entrance equipment when installed in accordance with National Electrical Code. 6-7/8" x 9-7/8" x 3-5/16".UL Listed (Enclosed Switches No. 98). Single phase, 2 pole, 3 wire, 240 volt, 10,000 AIC maximum, rated 10 HP maximum. Compact size, quick-make, quick-break mechanism, galvanized steel enclosure. Bottom cable entry and exit only, no hub provision supplied. Padlocking provisions to lock cover or lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. GSGK60 equipment ground kit sold separately. Number 14-3 AWG line and load wire range. 5-9/16" x 8-1/4" x 3-1/8". UL Listed file No.E4776, NEMA Type GD, meets federal specifications WS865C.
Square D D221NRBCP Fusible General Duty Safety Switch Cutler-Hammer DG321NRB Safety Switches Raco 692 Non-Gangable Old Work Switch Box
Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC, with metallic enclosure. Bolt on hubs. Rated 1-1/2 HP. For residential or commercial applications. Typical loads include lighting, air conditioning, appliances and branch circuit disconnects. 7.25" x 9.63" x 3.75". UL Listed, meets NEMA 3R standard. Steel enclosure. 3 pole, 4 wire, 3 blades, 3 class H cartridge fuses (not included), solid neutral, 120/240 volt AC, Rated 1-1/2 to 3 HP single phase, to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential or light commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Ample wire bending space for easier installation. DS100GK ground lug kit sold separately. 6-3/4" x 9-1/8" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1. Welded construction. Rectangular shape fits square cuts in block. Device ears inside the box, preventing mortar from getting in the device hole. Use a standard wall plate cover. Concentric knockouts, 6 end, 3 bottom and 4 sides. Nongangable. 47.8 cubic inches. 5-19/32" wide x 2-1/2" deep. Used in 4" block walls. UL Listed.
BOX SW 2-1/2DP TS-BRKT MC-CLMP
One 1/2" bottom and two 1/2" end conduit knockouts and four cable knockouts. With armored cable/metal clad/flex clamps. TS brackets for wood or metal studs, with 1/2" setback. Gauging tabs and recessed nailing spur, less ears. Acceptable for use in 2-hour rated walls. 2-1/2" deep - 12.5 cubic inches. UL Listed. UPC bar coded.
   
 
1