Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > GENERATOR PANEL BOXES
Sort By:
1
Thomas & Betts B118A Switch Box Thomas & Betts B120A-UPC Switch Box Thomas & Betts B122A-UPC Wall Box
With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies.
Thomas & Betts BH122A-UPC Outlet Box Thomas & Betts B114R-UPC Switch Box Thomas & Betts B232A-UPC Outlet Box
Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cubic inch rigid wall. 3-7/8" x 2-3/8" x 3-3/4". UL Listed. Old work wall case. Safe, non-conductive. Two Zip-Mount retainers. Four integral clamps, two each end; mounting ears. 14 cubic inch,  2-3/4" x 2-1/4" x 4-1/8". UL Listed. New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cubic inches. Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. 3" depth x 4" x 3-3/4".
Thomas & Betts B108B-UPC Outlet Box Thomas & Betts B108R-UPC Outlet Box Carlon B118B-UPC Switch Box
New work applications, shallow PVC switch box. Integral brackets. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 degree C connectors. 8 cubic inch capacity. 1-1/4" depth x 2-3/8" x 3-5/8". UL Listed. Safe, non-conductive. With bracket for 3/8" to 5/8" wallboard. Steel and wood studs, 4 knockouts. 2-15/16" depth x 3-3/4" x 2-1/4".
Allied Moulded 1098-N Switch Box Carlon B1EXT-CRD Electrical Box Thomas & Betts SC100RR Low Voltage Box
Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Extends an existing box by 1-1/8". Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4" x 3-1/4". UL Listed. For telecommunications and other low voltage wiring. Suitable for old work applications. 1.18" depth x 2.18" x 3.05".
Raco 7887RAC Old Work Cable Box Allied Moulded 1099-N Switch Box Carlon Flex-Plus A58381D-CAR ENT Flexible Raceway Switch Box
Plaster ears, old work swing style clips secure box in wall. Integral clamps. Two hour fire rated. Mounting clips. 3" depth. 14.0 cubic inch capacity. UL Listed. Thermoset-fiberglass, with angled mid-nails. Nails are installed as fastening devices. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. UL Listed. Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed.
Carlon Flex-Plus A58381E-CAR ENT Flexible Raceway Switch Box Raco 8196 Electrical Box Thomas & Betts B120R Outlet Box
Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 volt use in ceilings, floors, and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3" x 2-1/4" x 1-7/8". UL Listed. Six 1/2" and 3 TKO conduit knockouts (sides). Three 1/2" and 2 TKO conduit knockouts (bottom). Combination cover screw heads provide for faster mudring/cover installation. FM bracket mounts flat on side of stud and provides a rigid, secure box installation. Square boxes are installed in ceiling or walls for lighting fixture or receptacles. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL Listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cubic inch capacity. 3-5/8" depth x 2-5/16" x 4-1/8".
Raco 8197 Welded Electrical Box Thomas & Betts BH235A Outlet Box Carlon A521DE ENT Flexible Raceway Outlet Box
Square 4" steel box for lighting fixtures, switches or receptacles where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 1-1/2" deep. 21.0 cubic inch capacity. Welded, with six 1/2" and three TKO  side knockouts, three 1/2" and two TKO  bottom knockouts. Flush FH bracket type for side mount of stud and features hooks that drive into face of wood stud for hands-free installation. UL Listed. PVC handy box used for many wiring applications. Weather-resistant and nonconductive. Will accept metal handy box covers or nonmetallic covers. 35 cubic inch rigid wall. Non-metallic. Non-conductive. Suitable for masonry walls. 4" x 4" x 1-1/2". 1/2" and 3/4" knockouts. UL Listed.
Carlon SC100A 1-Gang Low Voltage Mounting Bracket Raco 473 Gangable Switch Box Carlon SC200RR Low Voltage Old Work Bracket
Backless bracket with nail on mounting and screw in bracket. Non-metallic. Non-conductive. 3.73" x 2.32". Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With nonmetallic sheathed cable clamps. Acceptable for use in 2-hour fire rated walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). 1/2" conduit knockouts (bottom). With leveling bumps. No plaster ears, not suitable for old work.  2-1/4" deep - 10.5 cubic inches. UL Listed. For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed.
Raco 528 Gangable Switch Box Hubbell 8500 Gangable Switch Box Carlon B418A-UPC Shallow Outlet Box
Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. Leveling bumps. Less ears. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. Conduit wiring system. Four 1/2" conduit knockouts (sides). Two 1/2" conduit knockouts (end). Two 1/2" conduit knockouts (bottom). Less clamps. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed.
Thomas & Betts B225R-UPC Outlet Box Raco 400 Gangable Switch Box Thomas & Betts B121ADJ Wall Box
With mounting ears and 2 swing clamps. Suitable for masonry walls, UL Listed, not UL Classified for fire resistance. 2-3/4" depth x 3-1/8" x 3-15/16" Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. 1-1/2" deep - 7.5 cubic inches. UL Listed. Provides simple installation and allows adjustment from 0 to 1-3/4" with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3-3/8" depth x 3-7/8" x 3-3/4". Permissible for use with 90 degree C connectors. Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C.
Thomas & Betts B344AB-UPC Outlet Box Hubbell 519 Gangable Switch Box Hubbell 8531 Gangable Switch Box
With captive nails and bracket support, twelve integral clamps, six each side. 44 cubic inch capacity,  2-11/16" depth x 3-3/4" x 5-5/8". Meets NEMA OS-2, UL Listed, classified for fire wall assemblies. Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed.
Raco 404 Non-Gangable Shallow Switch Box Hubbell 471 Gangable Switch Box Hubbell 410 Non- Gangable Switch Box
Shallow switch box, made for use with furring strips and 1/4" paneling. Welded, with nonmetallic sheathed cable clamps. Two cable knockouts (end). One 1/2"' conduit knockout (end). D bracket for wood or metal studs. 1/4" bracket setback. 1" deep - 6.5 cubic inches. UL Listed. Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2-hour rated walls. Four cable knockouts (end). One 1/2" conduit knockout (bottom). No bracket, clamp screws through beveled corners. With ears. 3" x 2" x 2-1/4" deep. 10.5 cubic inches. UL Listed. Four cable knockouts on the end. 3" x 2" x 1-1/2" deep. 7.5 cubic inches. With clamps for non-metallic sheathed cable. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. UL Listed.
Carlon B117RSW Old Work Shallow Outlet Box Raco 420 Gangable Switch Box Raco 560 Gangable Switch Box
Shallow box, flanged, non-metallic and non-conductive. 2" depth x 4-1/4" width x 4" length. Gangable 3" x 2" switch box, offers the option of constructing a box to hold two or more devices. Plaster ears allow the box to be used in old work applications. Acceptable for use in 2-hour fire rated walls. Four 1/2" conduit knockout (sides). Two 1/2" conduit knockout (end). Two 1/2" conduit knockouts (bottom). 2" deep - 10.0 cubic inches. UL Listed. For conduit. 3" x 2" switch box. No bracket, adjustable plaster ears allow box to be used in old work applications. 14.0  cubic inch capacity, 2-3/4" deep, four 1/2" side knockouts, two 1/2" bottom knockouts and two 1/2" end knockouts. Acceptable for use in 2-hour rated fire walls. UL Listed.
Raco 8355 Non-Gangable Switch Box Raco 7488RAC Old Work Cable Box Allied Moulded 9363-EWK Old Work Switch Box
Four cable knockouts (ends). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8", with bumps. Angle nail type. 3" x 2" x 2-27/32" deep, 15.8 cubic inch capacity. Prepositioned mounting nails included. Acceptable for use in 2-hour rated walls. UL Listed. Old work PVC box. With swing clips and integral clamps to hold securely. 3-5/32" depth. 25.0 cubic inch capacity. Thermoset-fiberglass with ears, wing brackets, speed clamps. 2 hour wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-7/8" x 2-3/8" x 3-1/4". UL Listed.
Raco 567 Gangable Switch Box Thomas & Betts B432A-UPC Outlet Box Raco 976 Extension Ring Switch Box
Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. 3" x 2" x 2-3/4" deep. 14.0 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. With captive nails and ten integral clamps, three top and bottom, two each side. Suitable for masonry walls. 4" x 4" square. UL Listed. Add-A-Depth ring used to correct for a 3" x 2" switch box or 4" square box (2 needed) set too deep in a wall. Adjustment range 1/4" to 1", two 1-1/8" long screws included. UPC bar code.
Thomas & Betts BH353A Lightweight Outlet Box Thomas & Betts SC200DV Dual Voltage Outlet Box Powerzone 30000-3L Recessed Light Bar Hanger
Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box. Enables line voltage and low-voltage to run to the same location. Uses standard 2 gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69" x 4.04". 20.5 cubic inch capacity. UL approved. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish.
Allied Moulded 9361-ESK Old Work Switch Box Hubbell 518 Gangable Switch Box Thomas & Betts B232B-UPC Outlet Box
Thermoset-fiberglass with ears, snap bracket, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" x 2-3/8" x 3-1/4". UL Listed. One 1/2" bottom conduit knockout, four bottom cable knockouts. With armored cable/metal clad/flex clamps. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. 2-1/2" deep - 12.5 cubic inches. UL Listed. UPC bar coded. With bracket for 3/8" to 5/8" wallboard steel or wood stud mounting and 8 integral clamps, 4 each side. 3-3/4" x 4" x 3".
Raco 223 Electrical Box Carlon Super Blue BH118R Old Work Outlet Box Raco 529 Gangable Switch Box
Four cable knockouts (sides). Two 1/2" and one TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With non-metallic sheathed cable clamps. FM flush side-mount bracket for wood or metal studs. Square boxes are installed in ceilings or walls for lighting fixtures or receptacles. Acceptable for use in 2-hour fire rated walls. 4" square x 1-1/2" deep - 21.0 cubic inches. UPC bar code. UL Listed. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 2.41". UL Listed. Four cable knockouts (end). Two 1/2" conduit knockouts, (end). One 1/2" conduit knockout (bottom). "LB" bracket for wood studs, 5/8" offset to clear narrow door molding. Face mounts on front edge of wood stud. Use when space between studs is limited. With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. UL Listed.
Carlon A122 ENT Flexible Raceway Outlet Box Raco 545 Non-Gangable Old Work Switch Box Raco 8211 Outlet Box
Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53" height x 2.10" width x 3.25" depth. Four cable knockouts (end). Two 1/2" knockouts (end). With NMSC, non-metallic sheathed cable clamps. Old work clip. 3" x 2" x 2-1/2" deep - 12.5 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. Four cable knockouts (sides). Four 1/2" and two TKO conduit knockouts (sides). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. Square boxes are used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. 4" square x 1-1/2" deep - 21.0 cubic inches. UL Listed, acceptable for use in 2-hour fire rated walls. UPC bar code.
Allied Moulded 2300-NK Switch Box Raco 508 Non-Gangable Switch Box Raco 487 Gangable Old Work Switch Box
Thermoset-fiberglass, with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 4" x 3-3/4". UL Listed. Two 1/2" conduit knockouts (end). Old work clips. Provided U box support eliminates the need for additional box supports to secure box in wall opening. For 3/4" sheetrock maximum thickness. Acceptable for use in 2-hour fire rated walls. 12.5 cubic inches. 3" x 2" x 2-1/2" deep. UL Listed. Four cable knockouts (end). One 1/2" conduit knockout (bottom). Clamp screws through beveled corners. With clamps for non-metallic sheathed cable. Adjustable plaster ears allow box to be used in old work applications. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. 3" x 2" x 2-1/4" deep. 10.5 cubic inches.
Raco 8601 Gangable Switch Box Raco TigerGrip 523 Gangable Old Work Switch Box Carlon Super Blue BH234R Old Work Outlet Box
Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). With non-metallic cable clamps in each end. 3" x 2" x 3-1/2" deep. 18.0 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated walls. UL Listed. One 1/2" bottom knockout. Four cable knockouts. 2-1/2" deep x 12.5 cubic inches. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2-hour rated walls. UL Listed. UPC bar coded. Lightweight, noncorrosive, and nonconductive, rigid, nonmetallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds shape even under the worst conditions. Provides large wirefill capacity, and comes with molded-in nailing flanges and molded-in swing clamps to make installation faster. Designed to nest inside one another to take up less shelf space and are easier to transport to job sites. 3.85" x 4.17". UL Listed.
Thomas & Betts B355R Outlet Box BULB LED A19 DIM 5.5W 2700K   BULB LED A19 DIM 5.5W 5000K
Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13" x 6.25" x 8". UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Raco 2011FBAR Vapor Barrier Box Sliderbox SB Adjustable Switch/Receptacle Outlet Box Raco 8235 Electrical Box
Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 23 cubic inch volume, 1/2" knockout. Internal steel, stud/wood screws. 3-9/16" depth x 2-1/4" width x 3-3/4" height. UL Listed for 2 hour fire resistive walls and ceilings. Installed flush in ceilings or walls for lighting fixtures, switches or receptacles, used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices. Combination cover screw heads for faster mud ring/cover installation. TS bracket for wood or metal studs, features gauging tabs and recessed nailing spurs. Fixture support of 6 lb. maximum. 30.3 cubic inch capacity 4" square x 2-1/8" depth with 6 eccentric 1/2" and 3 TKO side knockouts and 3 eccentric 1/2" and 2 TKO bottom knockouts. Acceptable for use in 2-hour fire rated walls. UL Listed.
5 WATT 2700K A19 DIM MED BASE LED6A19DIM 6/40W 27K 470L FRST Raco 605 Gangable Switch Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Four 1/2" conduit knockouts (sides). Four cable knockouts (end). Two 1/2" conduit knockouts (end). One 1/2" conduit knockout (bottom). 3" x 2" x 3-1/2" deep. 18.0 cubic inches. With clamps for non-metallic sheathed cable. "TS" brackets for wood or metal studs. Gauging tabs and recessed nailing spur. Side mount. UL Listed.
8.5 WATT 27K A19 DIM MED BASE Carlon B455A-UPC Outlet Box Carlon Adjust-A-Box MB120ADJ Adjustable Switch Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2" depth x 3-7/10" x 7-3/5". Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed.
BULB LED A19 DIM 9W 5000K     Thomas & Betts B234ADJ Wall Box Thomas & Betts BH464A Rigid Outlet Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2". 3" depth x 5-5/8" x 3-5/8". Satisfies NEC 370-20. UL Listed 5Z74 and classified 2 Hr W/C. Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation.
LED10A19DIMO930UB 3K800L FRSTD LED10A19DIM 10/60W 27K 800L   Allied Moulded 9312-EWK Old Work Outlet Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Thermoset-fiberglass, with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2-3/4" depth x 4-1/8" x 3-1/4". 2 hour wall fire rating. UL Listed.
Allied Moulded 3300-NK Outlet Box Powerzone TM5 Open Recessed Light Fixture Trim Powerzone TM12 Open Recessed Light Trim
Thermoset-fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 3" depth x 5-11/16" x 3-3/4". UL Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings.
Cooper LZR000212P Mini Track Light Connector BULB LED A19 DIM 4.5W 2700K   BAFFLE W/2 WH/TRIM BLK MTL 6IN
For joining two sections end-to-end. Indoor and outdoor use. 15,000 hours average life. Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed.
Powerzone TM9 Open Recessed Light Trim Tiger Grip 517 Gangable Switch Box Powerzone TM3 Open Baffle Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Four cable knockouts (end). One 1/2" conduit knockout (bottom). With clamps for non-metallic sheathed cable. 3" x 2" x 2-1/2" deep. 12.5 cubic inches. Adjustable plaster ears allow box to be used in old work applications. Acceptable for use in 2-hour rated fire walls. UL Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
BULB LED A15 DIM 4.5W 2700K   Powerzone TM2 Open Baffle Trim Powerzone TM6 Open Baffle Trim
Indoor and outdoor use. 15,000 hours average life. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
BAFFLE W/2 WH/TRIM WHT MTL 6IN Raco 681 Switch Box Carlon B468R Old Work Outlet Box
Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Drawn construction for surface mount applications. Conduit wiring system. Nine 1/2" conduit knockouts (sides). Five 1/2" conduit knockouts (bottom). TS brackets, for wood or metal studs. Gauging tabs and recessed nailing spur. 4" square. 2-1/8" deep - 30.3 cubic inches. Acceptable for use in 2-hour rated fire walls. UL Listed. Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cubic inch capacity, 3.41" depth x 7.57" x 2.89".
Halo 301P Open Recessed Light Trim Raco 8240 Electrical Box BULB LED A19 DIM 4.5W 2200K
Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved. Four cable knockouts (sides). Two 1/2" and one eccentric TKO conduit knockout (sides). One 1/2" conduit knockout (bottom). 2-1/8" deep. 30.3 cubic inches. With clamps for non-metallic sheathed cable. TS, flush side-mount bracket for wood or metal studs. Fixture support of 6 pounds maximum. Acceptable for use in 2-hour rated fire walls. UL Listed. Indoor and outdoor use. 15,000 hours average life.
Raco 685 Switch Box Raco 2002FBAR Vapor Barrier Box BULB LED A19 DIMMBLE 12W 2700K
Drawn construction for surface mount applications. Six 3/4" side knockouts, three 1/2" and two 3/4" bottom knockouts. TS bracket for wood or metal studs. 1/2" bracket setback eliminating the need for a plaster ring. 4" square. Acceptable for use in 2-hour rated walls and ceilings. 2-1/8" deep - 30.3 cubic inches. UL Listed. Made from rugged polycarbonate material, yellow color, gasket seals all openings to prevent air or vapor penetration. Front-mounted ground screw, 1/2" setback, flush bracket. Self-clamping, nonmetallic sheathed cable entry tabs. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Carlon Adjust-A-Box MB238ADJ Adjustable Switch Box Sliderbox SB Adjustable Switch/Receptacle Outlet Box A15 4.8W/40W MED DIM LED 3000K
Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily removable to allow inner wall access, or to switch between single gang and double gang boxes. Accommodates high and low voltage applications. Pre-installed ground lug. Flat bottom cable priouts. UL Listed. Molded of engineering grade non-metallic thermoplastic. Adjustable, no need to remove or relocate mounting screws to re-position the box. Slots retain slider plate and guide it in a straight motion. Internal rails guide slider plate for smooth mounting adjustability in wall substrates from 1/2" to 1-3/8" thick and ceiling substrates from 1/2" to 1-5/32". Square corner design allows easy wall cut-in (Old work applications). Molded spline device holes for quick device screw installation. 42 cubic inch volume, two 1/2" knockouts. Internal steel, stud/wood screws. 3-9/16" depth x 4" width x 3-3/4" height. UL listed for 2 hour fire resistive walls. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
A19 10.5W/60W MED DIM LED3000K Halo 401P Open Recessed Light Trim LED12A19DIMO930UB 3K1100L FRST
Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED12A19DIM 12/75W 2700K 1100L LED12A19DIM 12/75W 5000K 1100L Allied Moulded 9313-EWK Old Work Switch Box
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Thermoset-fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required, will not melt or distort in high heat. Shatter resistant in cold temperatures. 2 hour wall fire rating. 2-7/8" depth x 5-15/16" x 3-1/4". UL Listed.
BULB LED DIMM A19 G2 90CRI 1CD Area Lighting CPGI-ALR-LC-120 Photocontrol A19 10W COLD START LED 3000K
High-CRI, dimmable, 9.8 watts, 120 volts, 2700K, medium base LED is a direct replacement for 60 watt incandescent and meets the latest requirements of the California Energy Commission. CRI of 90 and average life of 25,000 hours. UL Listed, RoHS and FCC Compliant and mercury free. Energy Star Approved. 4.5"H x 2.3"D. Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness.25000 hours average life.
LED A15 827 2.5W/25W DIM 2700K FIXT RCSD CEIL WH SF RING     Halo 300P Open Recessed Light Trim
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Recessed ceiling light. Tapered baffle. Minimizes glare and reduces ceiling brightness. The baffles narrow the focus of the down lighting beam and many are used with reflector lamps. Contoured tapered sides of coilex baffle for use with reflector lamps. Coil spring retention. Self-flanged trim ring sized to hide gaps caused by construction tolerances. Compatible with halogen, incandescent, LED or CFL lamps. Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved.
Powerzone TRIM201-BK (MTM2) Baffle Trim Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7".
SENSOR PHOTO TWIST/LOCK ASSY  Halo H7ICT Recessed Housing LED A15 827 4.5W/40W DIM 2700K
Twist-lock light sensor. Turns lights on at dusk and off at dawn. 1000 watt capacity. 120 volts. For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
LED A15 E26 850 4.5W/40W 5000K Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol A15 827 4.5W/40W CAND LED2700K
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
A15 E17 4.5W 827 DIM LED 2700K A15 CAND 850 4.5W/40W LED5000K BULB LED A19 E26 10.6W 5K PHTO
Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Non-dimmable. Built-in sensor, automatically turns on at night and off during the day. 800 Lumen. Instant on to full brightness. No additional hardware needed. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 4.4"H x 2.35"D.
A15 E26 827 4.5W/40W LED 2700K Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol Halo 5000P Open Splay Trim
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
AmerTac 758M Post Eye Light Control Halo 70PS Recessed Light Shower Trim Halo H7ICAT Recessed Housing
Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt. Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Coilex Halo 310P Baffle Trim Powerzone TRIM201-WH (MTM1) Baffle Trim AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65".
Cooper LZR000200P Track Live-End Feed TRIM FIXT FULL BFFL WH/BLK 6IN AmerTac 758FPCTCC-4 Dawn Light Control
With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. AmerTac Dawn Light Control, 1800 W, 15 A, Dusk On - Dawn OFF Timing Range, 1100 VA Ballast, Lighting Control Control, Wire-In Connection, 5.4 in Overall Height, 3.6 in Overall Width, 2.1 in Overall Depth, Plastic, Includes: Bi-Metal Switch, 3-Wire, Infrared Technology, For Outdoor, Incandescent, Fluorescent, mercury vapor and Sodium Bulbs
Cooper LZR000202P Laser Track Floating Canopy Feed FIXTURE LT EYEBALL MTL WHT 6IN Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim
Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware. Halo E-series 6" white trim with white eyeball. 35 degree tilt. Uses PAR30 lamp. UL Listed. For use with E7RICAT and E7ICAT as well as Halo H7 series. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included).
Halo H750ICAT Recessed Housing Halo H750RICAT Remodel Recessed Housing Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control
For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical. Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35".
LED A15 827 6W/60W DIM 2700K  LED A15 MED E26 850 DIM 5000K Coilex Halo 310W Baffle Trim
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol A15 827 6W/60W CAND LED 2700K
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
A15 E12 CAND 6W DIM LED 5000K Coilex Halo 410W Baffle Trim Powerzone TM4 Open Baffle Trim
For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381). Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included).
Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol Halo H5ICAT Recessed Housing Cooper LZR000203P Track Light L-Connector
Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed. For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers.
Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control Powerzone TRIM201-BN (MTM3) Baffle Trim
For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included).
Halo 5001P Splay Baffle Trim REFLECTOR SPECULR WHT TRIM 4IN Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol
Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). Reflector trim in the 4" trim family for use in recessed downlighting. Specular clear, white trim. Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed.
BAFFLE W/TRIM WHITE 4IN       BAFFLE PLST STP WH RNG BLK 4IN Raco 686 Switch Box
BAFFLE W/TRIM WHITE 4IN
Our Price: $11.70
Halo E-Series 4" white trim with step plastic baffle. For use with E4RTATSB, E4ICATSB or Halo H99 series. UL Listed. Halo E-Series 4" white trim with step plastic baffle. For use with E4RTATSB, E4ICATSB or Halo H99 series. UL Listed. Welded construction. Conduit wiring system. Two 1/2" and two 3/4" knockouts (sides). Three 1/2" and three 3/4" knockouts (bottom). Six 1/2" and six 3/4" knockouts (end). FM type bracket for wood or metal studs. 2-1/2" deep - 47.8 cubic inches. UL Listed.
Halo H7 Recessed Housing LED A19 MED 850 7W FROST 5000K A19 MED 850 7W CLEAR LED 5000K
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp posting. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
Powerzone RS2000R (MCN2) Recessed Light Fixture Halo H7 Remodel Recessed Housing Halo H5T Recessed Housing
Non-IC housing, not for direct insulation contact; remodel housing applications. 4" downlight with E27 socket. Use R20/PAR20 50 watt maximum, (bulb not included). Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodate ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Socket snaps into trim for consistent lamp positioning. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief.  Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/2" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
Halo LZR102P Miniature Linear Laser Track Light System A15 E17 6W 827 DIM LED 2700K  A15 E12 CAND 6W DIM LED 2700K
Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
Halo 30WAT Super Recessed Light Fixture Trim Powerzone 30002WH3L Recessed Light Fixture SHOWERLIGHT WH TRM GLS LNS 6IN
Self flanged socket supporting super trim AIR-TITE metal baffle with torsion spring construction, makes installation air-tite regardless of housing used. Prevents airflow between attic and living areas. 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381) and H7RICT (025.9697). White trim, white baffle, white reflector. Sleeved. Non-IC housing, 5" mini can with 7" white open trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Halo E-Series 6" white shower trim with frosted glass lens. Wet location rated for use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed.
LED A21 3WY 5/10/16W MED 2700K Halo 78P Eyeball Recessed Light Trim Powerzone 30001WH-3L Recessed Light Fixture
Non-dimmable, 3-way LED replaces a 30 / 70 / 100 watt bulb while only using 5 / 10 / 16 watts. Average life of 25,000 hours. 2700K. Instant on to full brightness, indoor, suitable for damp locations. FCC and RoHS Compliant. Mercury Free. 500/1050/1600 lumens. 4.75"H x 2.25"D. Wet location and AIR-TITE listed white trim with white eyeball 30 degree Tilt, 360 degree rotation, 8 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved. Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
Cooper Lighting H7RICAT Recessed Lighting Housing Halo H99TAT Recessed Housing Powerzone T513WH-3L Eyeball Recessed Light Trim
Cooper Lighting Recessed Lighting Housing, 120 VAC, Incandescent Lamp, Insulated Insulation, 6-1/2 in Ceiling, 6 in Diameter, UL, cUL Listed, CSA Certified Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. The inner housing can be removed from plaster frame to provide access to the junction box. For providing accent and task lighting in non-insulated ceiling or where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box has four 1/2" trade size conduit knockouts with true pry-out slots. UL/cUL Listed Damp Location, Wet Location, feed through covered ceiling with select trims and 1598 Luminaire. Certified under ASTM-E283 for air tight construction. Easy to install. Takes medium base bulb, R-30, 75 watt maximum, (not included). 8" diameter eyeball trim for use with 6" Non-IC/IC housings.
Powerzone RS6000R+TRIM603-W Recessed Light Kit DWNLT IND RCSD 3000K LED 4IN  Cooper LZR000208P Laser Track Light Cord/Plug
Use GU10, 50 watt maximum, (bulb included). High brightness, diffusing, optical quality lens. Easy installation with universal mounting clips. Wet and damp location listed and IC (insulated ceiling) rated. Over 600 lumens. Compatible with 4" standard recessed housings: HALO?, ALL-PRO? and more. 50,000 hours with 70% maintained lumens. White plastic baffle trim. Three wire 10' cord with grounded plug. Maximum capacity of 5 amps.
Powerzone T505WH-3L Recessed Light Shower Trim Powerzone 30001BK-3L Recessed Light Fixture Powerzone RS6000R+ TRIM603- Recessed Light Kit
Eight inch diameter drop lens trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Use GU10, 50 watt maximum, (bulb included).
Halo H7 Remodel Recessed Housing Cooper EA24 Mounting Arm and Hardware Halo H99RTAT Recessed Housing
Can be installed below ceiling. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodates ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL damp locations. UL feed through. UL Listed for direct contact with insulation. CSA certified. IP rated. Extends light fixtures 24". Works with Cooper Lighting's NH Series mercury vapor lights, G Series and No.E70H high pressure sodium light fixtures. Includes mounting arm and hardware. Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. Can be installed from below the ceiling. For providing accent and task lighting where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four pryouts with integral strain relief for non-metallic sheathed cable. Four remodel clips secure housing and accommodate ceiling thickness of 1/2" and 5/8".  UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location Listed. UL/cUL Listed for Wet Location, covered ceiling - with select trims. Certified Under ASTM-E283 for air tight construction.
Powerzone TM11 Recessed Light Shower Trim Powerzone TM14 Flat Opal Recessed Light Shower Trim Heathco HZ-5690-AL Light Fixture Arm Extension
Eight inch diameter trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Diameter of 8" trim with flat opal glass for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length.
Cooper Lighting LZR000301P Halo Track Lights BULB LED 3-WAY 50/100/150W EQ Raco 687 Switch Box
White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. E26 (medium base) A21 bulb. 3-way LED replaces a 50 / 100 / 150 watt bulb while only using 7 / 15 / 23 watts/120v. 800/1600/2200 lumens. Average life of 25,000 hours. Instant on to full brightness, non-dimmable, Energy Saving. Indoor, suitable for damp locations. 5"H x 2.7"D. FCC and RoHS Compliant and mercury free. Conduit wiring system. Welded construction. FM bracket for wood or metal studs. Eight conduit knockouts (sides). Two conduit knockouts (end).  Four conduit knockouts (bottom). 63.5 cubic inch capacity. 7-19/32" wide x 2-1/2" deep. UL Listed.
Coilex Halo 993W Ring Baffle Trim Carlon SC300PRR Electrical Box Powerzone 30003WH-3L Recessed Light Fixture
White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448). Nonmetallic ABS material is lightweight, paintable and easy to handle. Recessed low profile design provides ample room behind dry wall and between studs to accommodates cable bend requirements. Hides the wires, cables, cords and plug heads used with flat panel display installations. Has a two gang low voltage opening and a universal one gang opening for an outlet or switch box (boxes, devices, and plates not included). 4 swing out clamps lock the plate securely to the wall, horizontal or vertical mount. 2.72" depth x 5.25" width x 10.5" length. Non-IC housing, 5" mini can with 7" white adjustable eyeball trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
Cooper Lighting LZR000104P Lazer Lighting Tracks Halo H99ICAT Recessed Housing Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock
Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. For accent and task lighting where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box with integral strain relief. Pass-N-Thru tool-less shortening of bar hangers. Housing can be removed from plaster frame for junction box access. UL Listed for direct contact with insulation. CSA Certified. IP Rated. For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height.
Halo 426 Specular Reflector Cone Cooper Lighting LZR000330P Halo Track Lights Cooper Lighting LZR000301P/W Halo Track Lights
White trim ring with clear specular reflector cone, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16". White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust.
Cooper Lighting LZR000304P/W Halo Track Lights Powerzone 5513BIC3L Recessed Light Fixture HOUSING RMDL NON-IC 120V 4IN