Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > SPA PANEL BOXES
Choose a sub category:
DIMMABLE NON DIMMABLE
Sort By:
1
GROUND BAR 7 HOLE CONSUMER PK Cutler Hammer BRFPP Filler Plate GE THFILLER Rectangle Filler Plate
For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 - 8 AWG copper or 12 - 8 AWG aluminum terminals and 3 large holes for 14 - 4 AWG copper or 12 - 4 AWG aluminum terminals. UL Listed and ANSI Certified. 6.875" height x 2.875" width x 0.5" depth, .105 lb. Plastic (snap-in) for type BR 1" space. May also be used with 400 amp and 600 amp load centers. Covers circuit breaker knock outs that have been removed in error.  Two 1" and two 1/2" plates.
LUG KIT NO6-2/0 NEUTRAL/GROUND Good Earth G8-120V20W-XBLB Replacement Xenon Lamp Good Earth G4-12V10W-XBLB Replacement Xenon Lamp
For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL Listed. 2.875" height x .75" width x  6.875" depth, .07 lb. Xenon replacement bulb. Xenon replacement bulb.
Good Earth G4-12V20W-XBLB Replacement Xenon Lamp Square D QO70AN Auxiliary Neutral Lug Kit Schneider PK3GTA-1CP Ground Bar Kit
Xenon replacement bulb. Made for QO load centers. Field installed for number 12 - 2 Al or number 14 - 4 Cu wire. QO accessories can only be used with QO load centers. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Square D QOFPCP Filler Plate GROUND BAR 24 HOLE PM-GOLD PK Square D PK4GTACP Ground Bar Kits
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Used for additional grounding as required by local code. Compatible with most load center enclosures. Fits solid or stranded 4 - 14 copper wire and 10 - 12 aluminum wire. Includes mounting screws. UL Listed and ANSI Certified. 11" height x 3.5" width x 0.5" depth, .304 lb. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Square D PK7GTACP Ground Bar Kits Square D HOMFPCP Filler Plate Square D HOM100AN Neutral Lug Kit
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified.
Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Schneider PK9GTACP Ground Bar Kit Square D ACPCP Closing Plate
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA Listed.
Cutler-Hammer GBK10P Ground Bar Kits Siemens EC38595 Closure Plate Square D PK12GTACP Ground Bar Kits
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Fits any meter socket application where a closure plate is needed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Square D PK15GTACP Ground Bar Kits Cutler-Hammer GBK14P Ground Bar Kits Schneider PK18GTACP Ground Bar Kit
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Siemens Energy ECGB10 Ground Bar Kits Square D PK23GTACP Ground Bar Kits Feit A19/DM/800/GU24/L Dimmable LED Lamp
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Instant on to full brightness, indoor, suitable for damp locations. Use in table and floor lamps, ceiling fans, wall sconces. 120 volts, 4.5" MOL x 2.5"D. 25,000 average hours. UL/CUL Listed, FCC and RoHS Compliant, Mercury free.
A19 GU24 850 9.9W/60W DIM5000K Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug Cutler Hammer GBK21P Ground Bar Kit
Instant on to full brightness, indoor, suitable for damp locations. Use in table and floor lamps, ceiling fans, wall sconces. 120 volts, 4.5" MOL x 2.5"D. 25,000 average hours. UL/CUL Listed, FCC and RoHS Compliant, Mercury free. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Siemens ECLK2125 Sub-Feed Lug Kit Square D S106 Replacement Screw POWER OUTLET 50A 14-50R CON PK
Sub feed lug kit. 125 amp. 2 pole. Lugs to sub feed to another panel. Fit many types of service entrance devices and load center covers. Use them to replace lost or damaged screws. Temporary RV power outlet is factory-assembled and factory-tested. Ready to use with no need to assemble individual parts. Single, heavy-gauge welded flange NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs and breakers. All-in-one construction for factory assured terminations. Rolled edge door for cord protection. Manufactured from heavy G-90 zinc coated steel which resists corrosion and fading. Complies with National Electrical Code and OSHA requirements. 7" height x 5.5" width x 5.25" depth, 4.06 lb.
POWER OUTLET 30AMP R32U CON PK Connecticut PS-13-HR Weatherproof Power Outlet Panel Connecticut PS-54-HR Weatherproof Power Outlet Panel
Temporary RV power outlet is factory-assembled and factory-tested. Ready to use with no need to assemble individual parts. Single, heavy-gauge welded flange NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs and breakers. All-in-one construction for factory assured terminations. Rolled edge door for cord protection. Manufactured from heavy G-90 zinc coated steel which resists corrosion and fading. Complies with National Electrical Code and OSHA requirements. 5.5" height x 7.5" width x 9.75" depth, 6.525 lb. Factory wired and completely assembled. Suitable for use with aluminum or copper wire. Cover design allows cord to be used when door is closed. 30 amp, 120 volt. 6-1/8" x 5-3/8" x 4-3/4". TT-30R NEMA receptacle. NEMA 3R weatherproof enclosure. Safe and easy to install. Factory wired and completely assembled. Suitable for use with aluminum or copper wire. Unique cover design allows cord to be used when door is closed. 50 amp, 120/240 volt. 6-18" x 5-3/8" x 4-3/4". 14-50R NEMA receptacle. NEMA 3R weatherproof enclosure.
POWER PANEL RV 70A 50/20A GFCI BR SPA 50A ST   GFI           Midwest UG412RMW250 Spa Panel
Unmetered RV outlet box. Rugged 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (Power Outlets). Spa panel, wire size - number 8-2 Cu/Al. 60 or 75 degreesC. NEMA 3R enclosure. Box size - 5R. Includes factory installed breaker, ground-fault self test. 10.2 In X 4.9 In X 4.3 In, 4.45 lb. UL Listed. Single phase, 2 or 4 breaker spaces. 50 amp GFI protection rating. Moisture resistant use around water heaters, swimming pools, spas, hot tubs, garden tubs, pools, etc. Includes 2 pole 50 amp ground fault breaker.
POWER PANEL RV 100A 50/30/20A POWER PEDESTAL BURIAL RV 100A POWER PEDESTAL/METER RV 100A
Unmetered RV outlet box. Rugged 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (Power Outlets). Unmetered earth burial pedestal with 50 amp, 30 amp and 20 amp GFCI circuit protected receptacles. 16-gauge zinc coated G-90 steel, with electro-deposition finish resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. Accepts copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (power outlets). 19.125" height x 9" width x 3.5" depth, 47 lb. Ring-type metered earth burial pedestal with 50 amp and 30 amp GFCI circuit protected receptacles. 16-gauge zinc coated G-90 steel, with electro-deposition finish, resists corrosion and fading. NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. Factory wired, assembled and tested. All-in-1 construction for factory assured terminations. Suitable for use as service entrance equipment when installed in accordance with the National Electric Code. All terminals accept copper or aluminum wire for added installation flexibility. Rolled edge door for cord protection. Dead front construction prevents accidental contact with live parts. Stay open position on door for convenience. Padlock provision. UL/CUL Listed (power outlets). 19.125" height x 9" width x 3.5" depth, 59 lb.
   
 
1