Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES > BREAKER BOXES
Sort By:
1
BULB LED A19 40W EQUIV NON-DIM BULB LED A19 60W EQUIV NON-DIM BULB LED A19 60W EQUIV NON-DIM
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 60W 800 LUM 5000K BULB LED A19 10YR 41K 1PK 60W BULB LED A19 FRSTED 8.5W 2700K
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. LED light bulb, non-dimmable indoor/outdoor.
BULB LED A19 75W EQUIV NON-DIM Powerzone 30000-3L Recessed Light Bar Hanger Cutler Hammer BRFPP Filler Plate
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. Plastic (snap-in) for type BR 1" space. May also be used with 400 amp and 600 amp load centers.
GROUND BAR 7 HOLE CONSUMER PK GE THFILLER Rectangle Filler Plate LUG KIT NO6-2/0 NEUTRAL/GROUND
For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 - 8 AWG copper or 12 - 8 AWG aluminum terminals and 3 large holes for 14 - 4 AWG copper or 12 - 4 AWG aluminum terminals. UL Listed and ANSI Certified. 6.875" height x 2.875" width x 0.5" depth, .105 lb. Covers circuit breaker knock outs that have been removed in error.  Two 1" and two 1/2" plates. For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL Listed. 2.875" height x .75" width x  6.875" depth, .07 lb.
Square D QO70AN Auxiliary Neutral Lug Kit Schneider PK3GTA-1CP Ground Bar Kit BULB LED 10YR 40W A19 27K 2PK
Made for QO load centers. Field installed for number 12 - 2 Al or number 14 - 4 Cu wire. QO accessories can only be used with QO load centers. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 40W A19 5K 2PK  BULB LED 10YR 60W A19 27K 2PK BULB LED 10YR 60W A19 5K 2PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
Good Earth G8-120V20W-XBLB Replacement Xenon Lamp Good Earth G4-12V10W-XBLB Replacement Xenon Lamp Good Earth G4-12V20W-XBLB Replacement Xenon Lamp
Xenon replacement bulb. Xenon replacement bulb. Xenon replacement bulb.
BULB LED A19 40W EQUIV NON-DIM BULB LED A19 40W EQUIV NON-DIM Square D QOFPCP Filler Plate
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
BULB LED A19 75W EQUIV NON-DIM BULB LED A19 75W EQUIV NON-DIM Powerzone TM5 Open Recessed Light Fixture Trim
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM12 Open Recessed Light Trim BULB LED A19 60W EQUIV NON-DIM BULB LED A19 60W EQUIV NON-DIM
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
BULB LED A19 8.5/60W EQ NON-DM BULB LED A19 100W EQUIV 3000K Square D PK4GTACP Ground Bar Kits
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
BAFFLE W/2 WH/TRIM BLK MTL 6IN Powerzone TM9 Open Recessed Light Trim Square D PK7GTACP Ground Bar Kits
Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Powerzone TM3 Open Baffle Trim Square D HOMFPCP Filler Plate Powerzone TM2 Open Baffle Trim
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM6 Open Baffle Trim Powerzone ORFL10506 Floodlight Kit GROUND BAR 24 HOLE PM-GOLD PK
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed. Used for additional grounding as required by local code. Compatible with most load center enclosures. Fits solid or stranded 4 - 14 copper wire and 10 - 12 aluminum wire. Includes mounting screws. UL Listed and ANSI Certified. 11" height x 3.5" width x 0.5" depth, .304 lb.
BAFFLE W/2 WH/TRIM WHT MTL 6IN Square D HOM100AN Neutral Lug Kit BULB LED A19 10YR 27K 1PK 75W
Halo E-series tapered metal baffle w/white trim, 2 included, wide and narrow. For use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed. Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 5K 1PK 75W  Halo 301P Open Recessed Light Trim Halo 401P Open Recessed Light Trim
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved.
6.5W 2200K A19 VIN DIM MED AMB Schneider PK9GTACP Ground Bar Kit Square D ACPCP Closing Plate
Indoor and outdoor use. 15,000 hours average life. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA Listed.
Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Cutler-Hammer GBK10P Ground Bar Kits Square D PK12GTACP Ground Bar Kits
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
FIXT RCSD CEIL WH SF RING     BULB LED A15 VINTAGE 4.5W/40W BULB LED A19 100W EQUIV NONDIM
Recessed ceiling light. Tapered baffle. Minimizes glare and reduces ceiling brightness. The baffles narrow the focus of the down lighting beam and many are used with reflector lamps. Contoured tapered sides of coilex baffle for use with reflector lamps. Coil spring retention. Self-flanged trim ring sized to hide gaps caused by construction tolerances. Compatible with halogen, incandescent, LED or CFL lamps. Indoor and outdoor use. 15,000 hours average life. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 100W EQUIV NONDIM Halo 300P Open Recessed Light Trim BULB LED ST19 DIM 4.5W 2700K
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. Indoor and outdoor use. 15,000 hours average life.
Siemens EC38595 Closure Plate BULB LED A15C VINTAGE 4.5W/40W Coleman Cable 0430 Yard Master Floodlights
Fits any meter socket application where a closure plate is needed. Indoor and outdoor use. 15,000 hours average life. High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included.  Polybagged. UL Listed.
Square D PK15GTACP Ground Bar Kits BULB LED A19 FRST 27K 1PK 100W BULB LED A19 FROST 5K 1PK 100W
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
Powerzone TRIM201-BK (MTM2) Baffle Trim BULB LED 10YR 40W A19 27K 4PK BULB LED 10YR 6/40W A19 5K
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 60W A19 27K 4PK BULB LED 10YR 60W A19 5K 4PK  BULB LED A19 10YR 35K 4PK 60W
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
Cutler-Hammer GBK14P Ground Bar Kits BULB LED A15 40W EQUIV NON-DIM LED A1540C 5W/40W CAND 3000K
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D.
A15 5W/40W 850 CAND LED 5000K 6.5W 22K ST19 VIN DIM MED CLRD Halo H7ICT Recessed Housing
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Indoor and outdoor use. 15,000 hours average life. For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Schneider PK18GTACP Ground Bar Kit Siemens Energy ECGB10 Ground Bar Kits GE Electrical TFN60RCP AC Disconnect Switches
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Steel enclosure. 2 pole, 3 wire, 240 volt AC, rated 10 HP. For central air conditioner. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. 4-3/4" x 7-1/2" x 2". UL1429 enclosure pullout switch, UL Listed.
Square D PK23GTACP Ground Bar Kits Halo 5000P Open Splay Trim Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
Halo 70PS Recessed Light Shower Trim Halo H7ICAT Recessed Housing Coilex Halo 310P Baffle Trim
Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Powerzone TRIM201-WH (MTM1) Baffle Trim TRIM FIXT FULL BFFL WH/BLK 6IN FIXTURE LT EYEBALL MTL WHT 6IN
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Halo E-series 6" white trim with white eyeball. 35 degree tilt. Uses PAR30 lamp. UL Listed. For use with E7RICAT and E7ICAT as well as Halo H7 series.
A1560C 850 6.5W CAND LED 5000K LED A15 6.5W/60W MED 3000K    LED A15 6.5W/60W CAND 3000K
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D.
Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim Halo H750ICAT Recessed Housing Halo H750RICAT Remodel Recessed Housing
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
Coilex Halo 310W Baffle Trim Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim Coilex Halo 410W Baffle Trim
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381).
Powerzone TM4 Open Baffle Trim Eaton DPU222RP Type ACD Non-Fusible Pullout Disconnect Switch BULB LED ST19 DIM 6.5W 2700K
Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included). Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separately. #14-3 AWG wire range. 5-3/8" x 8-3/4" x 3-1/8". UL Listed file No.E5239. Indoor and outdoor use. 15,000 hours average life.
Halo H5ICAT Recessed Housing LED A19 MED 3.6W/40W FRO 2700K LED A19 3.6W/40W MED 2700K CLR
For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
Powerzone TRIM201-BN (MTM3) Baffle Trim Halo 5001P Splay Baffle Trim REFLECTOR SPECULR WHT TRIM 4IN
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). Reflector trim in the 4" trim family for use in recessed downlighting. Specular clear, white trim.
Bell 5792-0 Portable Spike Light BAFFLE W/TRIM WHITE 4IN       BAFFLE PLST STP WH RNG BLK 4IN
BAFFLE W/TRIM WHITE 4IN
Our Price: $11.70
Locking swivel knuckle for positive lamp positioning and pin-point directional aiming. Die cast construction, powder coat finish. For 75-150 watt maximum, Par-38 type lamps, (not included). 15 amp/125 volt, 3 wire cord set included. Does not include mounting plate. Gray color. cULus Listed. Shrink wrapped. Halo E-Series 4" white trim with step plastic baffle. For use with E4RTATSB, E4ICATSB or Halo H99 series. UL Listed. Halo E-Series 4" white trim with step plastic baffle. For use with E4RTATSB, E4ICATSB or Halo H99 series. UL Listed.
Halo H7 Recessed Housing LED A19 MED 7W/60W CLEAR 2700K Cutler Hammer GBK21P Ground Bar Kit
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp posting. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Powerzone RS2000R (MCN2) Recessed Light Fixture Halo H7 Remodel Recessed Housing Halo H5T Recessed Housing
Non-IC housing, not for direct insulation contact; remodel housing applications. 4" downlight with E27 socket. Use R20/PAR20 50 watt maximum, (bulb not included). Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodate ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Socket snaps into trim for consistent lamp positioning. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief.  Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/2" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
Halo 30WAT Super Recessed Light Fixture Trim Powerzone 30002WH3L Recessed Light Fixture SHOWERLIGHT WH TRM GLS LNS 6IN
Self flanged socket supporting super trim AIR-TITE metal baffle with torsion spring construction, makes installation air-tite regardless of housing used. Prevents airflow between attic and living areas. 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381) and H7RICT (025.9697). White trim, white baffle, white reflector. Sleeved. Non-IC housing, 5" mini can with 7" white open trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Halo E-Series 6" white shower trim with frosted glass lens. Wet location rated for use with E7RICAT and E7ICAT as well as Halo H7 series. UL Listed.
A19 9.5W/60W MED E26 LED 3000K Halo 78P Eyeball Recessed Light Trim Powerzone 30001WH-3L Recessed Light Fixture
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Wet location and AIR-TITE listed white trim with white eyeball 30 degree Tilt, 360 degree rotation, 8 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved. Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
Cooper Lighting H7RICAT Recessed Lighting Housing Halo H99TAT Recessed Housing Powerzone T513WH-3L Eyeball Recessed Light Trim
Cooper Lighting Recessed Lighting Housing, 120 VAC, Incandescent Lamp, Insulated Insulation, 6-1/2 in Ceiling, 6 in Diameter, UL, cUL Listed, CSA Certified Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. The inner housing can be removed from plaster frame to provide access to the junction box. For providing accent and task lighting in non-insulated ceiling or where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box has four 1/2" trade size conduit knockouts with true pry-out slots. UL/cUL Listed Damp Location, Wet Location, feed through covered ceiling with select trims and 1598 Luminaire. Certified under ASTM-E283 for air tight construction. Easy to install. Takes medium base bulb, R-30, 75 watt maximum, (not included). 8" diameter eyeball trim for use with 6" Non-IC/IC housings.
Powerzone RS6000R+TRIM603-W Recessed Light Kit DWNLT IND RCSD 3000K LED 4IN  CONTROL LIGHT MOTION
CONTROL LIGHT MOTION
Our Price: $13.81
Use GU10, 50 watt maximum, (bulb included). High brightness, diffusing, optical quality lens. Easy installation with universal mounting clips. Wet and damp location listed and IC (insulated ceiling) rated. Over 600 lumens. Compatible with 4" standard recessed housings: HALO?, ALL-PRO? and more. 50,000 hours with 70% maintained lumens. White plastic baffle trim. Updated compact design fits more PAR fixtures. Automatically turns light on when motion is detected and off 10 minutes after last motion is detected. Senses activity at distances up to 20 feet away. 150 watt maximum bulb.
Powerzone T505WH-3L Recessed Light Shower Trim Powerzone 30001BK-3L Recessed Light Fixture Siemens Energy WN2060U AC Disconnect Switches
Eight inch diameter drop lens trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Single phase, 2 pole, 2 wire, 240 volt, rated 10 HP, steel enclosure. All lugs positioned for bottom entry and exit wiring. Easy mounting for quick installation. Pullout head can be replaced in off position. 10,000 AIR. 12 - 3 AWG al, 14 - 3 kcmil cu lug wire range. 5-5/32" x 7-5/16" x 2-7/32". UL Listed.
Powerzone RS6000R+ TRIM603- Recessed Light Kit Square D S106 Replacement Screw Halo H7 Remodel Recessed Housing
Use GU10, 50 watt maximum, (bulb included). Fit many types of service entrance devices and load center covers. Use them to replace lost or damaged screws. Can be installed below ceiling. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodates ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL damp locations. UL feed through. UL Listed for direct contact with insulation. CSA certified. IP rated.
Siemens ECLK2125 Sub-Feed Lug Kit Halo H99RTAT Recessed Housing Powerzone TM11 Recessed Light Shower Trim
Sub feed lug kit. 125 amp. 2 pole. Lugs to sub feed to another panel. Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. Can be installed from below the ceiling. For providing accent and task lighting where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four pryouts with integral strain relief for non-metallic sheathed cable. Four remodel clips secure housing and accommodate ceiling thickness of 1/2" and 5/8".  UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location Listed. UL/cUL Listed for Wet Location, covered ceiling - with select trims. Certified Under ASTM-E283 for air tight construction. Eight inch diameter trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included).
Powerzone TM14 Flat Opal Recessed Light Shower Trim Cutler-Hammer DPF221RP AC Disconnect Switches Square D QO2L30SC Load Center
Diameter of 8" trim with flat opal glass for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved. Main lug load center, indoor, 30 amp, 2 spaces/2 circuits. Accommodates both overhead and underground feed applications. 1" maximum knockout on the top and bottom of the enclosure. Comes with a doorless surface mount cover and factory installed main lugs. UL Listed.
Zenith SL-5408-GR-A Motion Sensor Floodlight Zenith SL-5408-BZ Motion Sensor Floodlight Zenith SL-5408-WH-A Motion Sensor Floodlight
Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations.
Homeline Square D HOM24L70S Load Center Homeline Square D HOM24L70F Load Center Cutler-Hammer AC222URNMP-A2 AC Disconnect Switches
Main lug indoor load center, 70 amp, 2 spaces/4 circuits. Maximum SCCR of 10,000 and a maximum load of 240 volts. NEMA type 1 enclosure. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers. Main lug indoor load center, 70 amp, 2 spaces/4-circuits. NEMA type 1 enclosure with a flush mount cover. Overhead or underground feeds with 1-1/4" knockouts in both the top and bottom endwalls. Compatible with Homeline 1 pole and tandem breakers and a PK3GTA1 ground bar kit (not included). UL Listed. Single phase, 2 pole, 2 wire, 240 volt AC. Rated 3 HP at 120 volt, 10 HP at 240 volt. For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. Swing-up cover remains in place when in open position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8-5/8" x 3-1/2". UL Listed file No. E5239.
Eaton BR24L70SP Load Center Eaton BR24L70FP Load Center PATH LIGHT LED SILVER
Steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 2 (1") spaces, 4 poles, 120/240 volt. No.GBK5 or GBK520 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box 4-1/2" x 9-7/16" x 3". UL Listed file E8741. Single phase, 3 wire, insulated/bondable neutral, 2 (1") spaces, 4 poles, 120/240 volt AC. No. GBK5 or No. GBK520 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box 4-1/2" x 9-7/16" x 3". UL Listed file E8741. Weatherproof, motion sensor, outdoor/indoor. Easy installation, no wiring. 42 lumens. 4 AA batteries (not included). Detaches from its mounting plate to serve as a handheld light
PATH LIGHT LED BRNOZE         PATH LIGHT LED WHITE          GE Electrical TPN60R1 AC Disconnect Switches
Weatherproof, motion sensor, outdoor/indoor. Easy installation, no wiring. 42 lumens. 4 AA batteries (not included). Detaches from its mounting plate to serve as a handheld light Weatherproof, motion sensor, outdoor/indoor. Easy installation, no wiring. 42 lumens. 4 AA batteries (not included). Detaches from its mounting plate to serve as a handheld light Suitable for use as service entrance equipment. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. Designed to comply with code requirements for disconnecting central air conditioners and heat pumps. Open sides and top for quick installation. Impact and corrosion resistant GE Noryl thermoplastic resin. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. 5-3/4" x 8" x 3-1/8". UL1429 enclosed pullout switch, UL Listed.
Coilex Halo 993W Ring Baffle Trim GE Electrical TF60RCP AC Disconnect Switches Powerzone 30003WH-3L Recessed Light Fixture
White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448). Steel enclosure. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. Uses cartridge fuses. For central air conditioner. Designed to comply with code requirements for disconnecting means within sight of central air conditioners and heat pumps. Removable closing cap not included. Equipment ground. 14-3 AWG lug wire range. 6-1/2" x 9" x 3-1/4". UL869 service equipment, UL Listed. Non-IC housing, 5" mini can with 7" white adjustable eyeball trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
BULB LED A19 10YR 27K 4PK 75W BULB LED A19 10YR 5K 4PK 75W  Cutler Hammer BRL200 Main Lug Kit
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Two pole - 200 amp - pair.
Halo H99ICAT Recessed Housing Halo 426 Specular Reflector Cone Square D QO200TRCP Molded Non-Fusible Disconnect Switch
For accent and task lighting where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box with integral strain relief. Pass-N-Thru tool-less shortening of bar hangers. Housing can be removed from plaster frame for junction box access. UL Listed for direct contact with insulation. CSA Certified. IP Rated. White trim ring with clear specular reflector cone, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved. For use with 75 degree Celsius wire. 2 pole, 2 wire, 240 volt AC, rated 10 HP, steel enclosure with molded case. With reliable, quick-make, quick-break operating mechanism. Suitable for use on systems with up to 10,000 RMS symmetrical amp available fault current at 240 volt AC maximum when protected by a fuse or circuit breaker rated 60 amp or less. Does not contain overcurrent protection. Ground bar bonded to back. 4-5/8" x 6-1/2" x 3-7/8". UL Listed.
Eaton CH2L70SP Load Center Bell Weatherproof 5829-5 Floodlight Kits Powerzone 5513BIC3L Recessed Light Fixture
Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 2 (3/4") spaces, 4 poles with CHNT breakers, 120/240 volt. Ground bar No. GBK5 or No. GBK520 sold separately. Solid copper bus bar and branch fingers. In service entrance application, where neutral is bonded, unused neutral connections may be used for termination of equipment grounds. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. #14 - 2 main lug wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box - 4-1/2" 9-1/2" x 3-1/8". UL Listed file E8741. Includes two die-cast zinc lampholders, with round zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For wet locations. Use Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 8" white eyeball trim; for new construction applications. cULus Listed.
Bell Weatherproof 5818-6 Floodlight Kits Bell Weatherproof 5818-5 Floodlight Kits HOUSING RMDL NON-IC 120V 4IN
Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Rectangular light kit. Includes 2 die-cast aluminum lampholders with rectangular zinc box and cover, gaskets, screws, mounting lugs and closure plugs. For use in wet, damp, or dry locations. Uses 2 Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Boxed. Supports industry E26 LED lamp types. Air-tite. UL Listed.
PowerMark Gold TL412C Standard Load Center Powerzone 5502BIC-3L Recessed Light Fixture Coilex Halo 993P Ring Baffle Trim
Single-phase, three-wire, 120/240 volt AC. (4) 1" circuits or (8) 1/2" circuits. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. Minimum 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100 per cent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE's exclusive 1/2" THQPs. 10,000 AIC. 40 - 225 amp single phase devices have removable closing caps. TL load center enclosures are galvanized steel. 7-1/4" x 9" x 3". UL Listed. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 8" white open trim; for new construction applications. cULus Listed. White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448).
Square D QO24L70S Load Center Powerzone RS2000IC (MCN1) Recessed Light Fixture Halo 5050PS Enclosed Dome Recessed Light Shower Trim
Main lug load center, intended for fixed applications. 70 amp, 2 spaces/4 circuits. Surface mount cover with door and a NEMA type 1 enclosure for indoor use. Single phase unit, features a copper bus for conductivity and is rated for up to 10,000 SCCR. ANSI Certified and UL Listed. For direct insulation contact; new construction applications. E27 socket. 4" downlight with hanger bars. Use R20/PAR20 50 watt maximum bulb (not included). Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
HOUSING CONSTRUCTION 120V 4IN Eaton BR48L125FP Load Center Eaton BR48L125SP Load Center
Supports industry E26 LED lamp types. Air-tite. UL Listed. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 4 (1") spaces, 8 poles, 120/240 volt. No.GBK10 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service application. #14 - 1/0 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 4 (1") spaces, 8 poles, 120/240 volt. No. GBK10 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service application. #14 - 1/0 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Cutler-Hammer DPF222RP AC Disconnect Switches LIGHT RCSD LED ALUM WWHT 4IN  Bell 5883-5 Weatherproof Floodlight Kit
Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved. Recessed Light Kit. All-in-one. 3000K Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed.
Bell Weatherproof 5883-6 Dusk To Dawn Floodlight Kits 53809111 LIGHT DOWN 450L 3IN  LIGHT RCSD LED KIT ALUM 5&6IN
Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed. Recessed Light Kit. All-in-one. 3000K
PATH/GARDEN LIGHT 6 LED       Murray LC004NSU Load Center LGHT CEIL RCSD LED 600L WH 4IN
Motion-sensing light casts a broad, bright beam. It comes with a mounting bracket to attach it to decks and walls and a detachable stake. Weatherproof, outdoor/Indoor. 42 lumens, 4 AA batteries (not included). Single phase - 3 wire; 120/240 volt;  8 circuits maximum with 4 - 1" spaces. 14" length x 8-1/2" width x 3-1/4" depth. 10,000 AIC. UL listed.
LGHT CEIL RCSD LED 600L WH 6IN Powerzone 5509BICG3L Recessed Light Fixture Powerzone RS2000RG+ TRIM405 Recessed Light Kit
Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 7" white baffle trim; for new construction applications. cULus Listed. Non-IC housing not for direct insulation contact; remodel housing applications. 4" downlight. Use GU10, 50 watt maximum, (bulb included).
Homeline Square D HOM612L100S Load Center Homeline Square D HOM612L100F Load Center Halo 172PS Opal Recessed Light Shower Trim
Main lug indoor load center, 100 amp,  6 space/12 circuit. NEMA type 1 enclosure.  Single phase, 3 wire, solid neutral. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers. Main lug indoor load center, 100 amp, 6 space/12 circuit. 1-1/2" knockouts in the top and bottom end walls to allow for use with either overhead or underground fed electrical wiring. 22,000 short circuit current rating (SCCR) and can be fitted with a secondary surge arrestor (not included) for added protection. Single phase, 3 wire, solid neutral. UL Listed. Wet location and AIR-TITE listed white trim with frosted glass dome 7-3/4 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
PowerMark Gold TLM612FCUD Standard Convertible Load Center 53808211 LIGHT DOWN 650L 4IN  Coilex Halo 456W Baffle Trim
Indoor flush or surface mount with door. Box is significantly smaller and lighter while maintaining optimum wire-bending space. Side mounted main  breaker allows top or bottom feed. Sturdy copper bus and galvanized box increase durability and reliability; tinplated for corrosion resistance. Minimum 100 per cent neutral terminations. All neutral holes rated for 14-4 wire. Extruded neutrals are easier to wire, reducing installation time and cost. Combination slotted/Robertson screws speed wiring. Accepts GE Q-Line branch circuit breakers, including GE's exclusive 1/2" THQPs. Interior removes and reinstalls easily. Main breaker not included. (6)  1" circuits or (12)  1/2"  circuits. 12-5/8" x 12-3/8" x 3-3/8". UL Listed. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill SKU number:140.7022. Sleeved.
American Tack OMLC5BC Westek Photo Control Powerzone RS2000RG+ TRIM405 Recessed Light Kit BULB LED A19 FRST 27K 4PK 100W
Outdoor motion activated light control with selectable off times. Turns on when motion is detected, off at user programmed time, 1 / 2 / 5 / 10 or 20 minutes. Fixed position switch retains setting in the event of a power outage. 180 degree sensing window, 30' detection zone. Ball joint for full adjustability, up/down/left/right. Spring loaded contact for full 360 degree rotation. Compatible with compact fluorescent, LED, halogen and incandescent floodlights. Non-IC housing not for direct insulation contact; remodel housing applications. 4" downlight. Use GU10, 50 watt maximum, (bulb included). Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 FROST 5K 4PK 100W BULB LED A19 FRST 35K 4PK 100W Heathco HZ-5411-GR Security Floodlight
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. LED compatible. UL Listed.
Heathco HZ-5411-WH Security Floodlight 53807211 LIGHT DOWN 900L 5IN  BULB LED 7W A60 CWHT
Features sensitivity/range adjustment, test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 70 feet with a sensing angle of 150 degrees. Installs with just a screwdriver. Flood lights not included. LED compatible. UL Listed. Luemx LED Bulb, 7 W, 120 VAC, E26/E27, 940000 hr Average Life, Cool White, CRI >80, 3500 K Color, 130 deg Beam, 60 mm Dia, 115 mm Length, 50 - 60 Hz
Eaton BR612L125SP Load Center FIXT RCSD CEIL GIMBAL TRIM 4IN FIXT RCSD CEIL GMBL TRIM 5&6IN
Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 6 (1") spaces, 12 poles, 120/240 volt. No.GBK10 ground bar and door sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance appliance. #14 - #1 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Cutler-Hammer ACD221RNMP AC Disconnect Switches Heathco HZ-5407-BZ Motion Detector Heathco HZ-5407-WH Motion Detector
Single phase, 2 pole, 2 wire, 240 volt AC, non-metallic enclosure. Rated 1-1/2 HP at 120 volt, 3 HP at 240 volt with time delay fuses (uses class H cartridge fuses, not included). For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. 10,000 amp RMS symmetrical interrupting rating. Suitable for use as service entrance equipment with ground bar. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8.63" x 3.5". UL Listed file No. E5239. Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent. Replacement motion sensor for security lights, requires 120-volts AC, 60 Hz. Test, auto and manual operating modes. For manual mode, the control must be wired through a switch. Turns on lighting when motion is detected. Automatically turns lighting off with time delay of 1, 5 or 10 minutes. Photocell keeps the lighting off during daylight hours. LED indicates motion was sensed (day or night). Resets to auto mode at dawn. Adjustable range up to 70 ft., varies with surrounding temperature. Sensing angle up to 180 degrees. Electrical load up to 500 watt maximum incandescent.
Eaton BR24L70RP Load Center Westek OMLC7BC Dual Function Programmable Motion Activated Light Control LIGHT ACCENT LANDSCAPE LED400L
Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 2 (1") spaces, 4 poles, 120/240 volt AC. With closure plates, hubs and No.GBK5 or GBK520 ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. 4-1/2" x 9-7/16" x 3". UL Listed file E8741. Style 5R box. Westek Motion Activated Light Control, Dual Function, Programmable, Suitable For Use With: CFL, Halogen and Incandescent Floodlights, 150 W, 180 deg Detection Zone, White, For Outdoor Security - Driveways, Yards and Alleyways Accent landscape lighting
Eaton BR612L125FDP Load Center