Home > ELECTRICAL > ROUGH ELECTRICAL > PANEL BOXES
Choose a sub category:
BREAKER BOXES DIMMABLE MOBILE HOME LOAD CENTERS
SPA PANEL BOXES GENERATOR PANEL BOXES SAFETY SWITCHES
DISCONNECT BOXES METER BASES PANEL BOX ACCESSORIES
UTILITY POWER OUTLETS
Sort By:
1
Feit BPAG500DM/LED Dimmable LED Lamp BULB LIGHT LED 40W A19 5000K  GROUND BAR 7 HOLE CONSUMER PK
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. For grounding copper or aluminum terminals in a GE load center. Offers 4 small holes for 14 - 8 AWG copper or 12 - 8 AWG aluminum terminals and 3 large holes for 14 - 4 AWG copper or 12 - 4 AWG aluminum terminals. UL Listed and ANSI Certified. 6.875" height x 2.875" width x 0.5" depth, .105 lb.
Cutler Hammer BRFPP Filler Plate Feit Q40R20/ES Dimmable Halogen Lamp BULB LED A19 DIM 5.5W 2700K
Plastic (snap-in) for type BR 1" space. May also be used with 400 amp and 600 amp load centers. For track lighting. Halogen energy saver with XENON gas added. Instant full brightness. 120 volt, 3000K, 450 lumens, 2,000 average life hours. 4.125" MOL. Dimmable. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
BULB LED A19 DIM 5.5W 5000K   Feit BPAG800DM/LED Dimmable LED Lamp BULB LIGHT LED 60W A19 5000K
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
GE THFILLER Rectangle Filler Plate Feit Q40BR30/ES Dimmable Halogen Lamp 5 WATT 2700K A19 DIM MED BASE
Covers circuit breaker knock outs that have been removed in error.  Two 1" and two 1/2" plates. For track and recessed lighting. Halogen energy saver with XENON gas added. Instant full brightness. 120 volt, 3000K, 600 lumens, 2,000 average life hours. 5.375 MOL. Dimmable. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED6A19DIM 6/40W 27K 470L FRST 8.5 WATT 27K A19 DIM MED BASE LUG KIT NO6-2/0 NEUTRAL/GROUND
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. For use with wire range 6-2/0. Can be mounted on any neutral or ground position by simply removing the termination screw. UL Listed. 2.875" height x .75" width x  6.875" depth, .07 lb.
BULB LED A19 DIM 9W 2700K     BULB LED A19 DIM 9W 5000K     Square D QO70AN Auxiliary Neutral Lug Kit
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Made for QO load centers. Field installed for number 12 - 2 Al or number 14 - 4 Cu wire. QO accessories can only be used with QO load centers.
Schneider PK3GTA-1CP Ground Bar Kit LED10A19DIMO930UB 3K800L FRSTD LED10A19DIM 10/60W 27K 800L
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Square D QOFPCP Filler Plate GROUND BAR 24 HOLE PM-GOLD PK BULB LED A19 DIM 4.5W 2700K
Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified. Used for additional grounding as required by local code. Compatible with most load center enclosures. Fits solid or stranded 4 - 14 copper wire and 10 - 12 aluminum wire. Includes mounting screws. UL Listed and ANSI Certified. 11" height x 3.5" width x 0.5" depth, .304 lb. Indoor and outdoor use. 15,000 hours average life.
Square D PK4GTACP Ground Bar Kits Square D PK7GTACP Ground Bar Kits Square D HOMFPCP Filler Plate
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Fills opening in covers if twistout is removed in error. QOFPCP are used only in QO load centers, filling the spaces where no circuit is attached. CHOMFPCP are for use only in Homeline load centers. UL Listed and ANSI Certified.
BULB LED A19 DIM 6.5W 2700K   BULB LED A15 DIM 4.5W 2700K   Square D HOM100AN Neutral Lug Kit
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Breaker box neutral lug is designed for Homeline load centers. It works with number 1 - 1/0 copper and aluminum wire. UL Listed, ANSI Certified.
BULB LED A19 DIM 4.5W 2200K   BULB LED A195K 1PK 40W        BULB LED A19 DIMMBLE 12W 2700K
Indoor and outdoor use. 15,000 hours average life. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
A15 4.8W/40W MED DIM LED 3000K A19 10.5W/60W MED DIM LED3000K LED12A19DIMO930UB 3K1100L FRST
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED12A19DIM 12/75W 2700K 1100L LED12A19DIM 12/75W 5000K 1100L Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
BULB LED DIMM A19 G2 90CRI 1CD Schneider PK9GTACP Ground Bar Kit Square D ACPCP Closing Plate
High-CRI dimmable Enhance, 9.8 watts, 120 volts, 2700K, medium base LED is a direct replacement for 60 watt incandescent and meets the latest requirements of the California Energy Commission. CRI of 90 and average life of 25,000 hours. UL Listed, RoHS and FCC Compliant and mercury free. Energy Star Approved. 4.5"H x 2.3"D. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used for sealing off a hub opening when a service feed originates underground. The plate is compatible with A-type openings and can be used on outdoor devices that utilize a 4-hole mounting pattern. Use for A-size hub opening for Square D metering equipment. UL and CSA Listed.
Feit 35PAR30/L/QFL/ES Dimmable Halogen Lamp Feit 55PAR30/L/QFL/ES Dimmable Halogen Lamp Cutler-Hammer GBK10P Ground Bar Kits
Helps save energy compared to standard halogen bulb by adding Xenon gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 560 lumens, medium E26 base. Instant on to full brightness, dimmable. 50 watt equivalent. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
A19 10W COLD START LED 3000K  Siemens EC38595 Closure Plate Square D PK12GTACP Ground Bar Kits
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness. Fits any meter socket application where a closure plate is needed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
LED A15 827 2.5W/25W DIM 2700K Osram Sylvania 16103 Tungsten Ecologic Halogen Lamp Osram Sylvania 16104 Tungsten Ecologic Halogen Lamp
Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant. Use indoor or out. 3.25" overall length. 100 CRI. Ecologic. Improved lamp efficiency to meet EISA requirements, up to 33 percent energy savings over standard full wattage lamps. Familiar shapes. Crisp, vivid 100 CRI light, mercury free, instant on. Made in the USA. RoHS compliant.  average life hours. Boxed.
Osram Sylvania 10077 Tungsten Halogen Lamp Osram Sylvania 10078 Halogen Lamp BULB LED A19 ULTRA 35K 1PK 75W
Improved lamp efficiency to meet EISA requirements, up to 33 percent energy savings over standard full wattage lamps. Familiar shapes. Crisp, vivid 100 CRI light, mercury free, instant on. Made in the USA. RoHS compliant.  average life hours. Boxed. Improved lamp efficiency to meet EISA requirements, up to 33 percent energy savings over standard full wattage lamps. Familiar shapes. Crisp, vivid 100 CRI light, mercury free, instant on. Made in the USA. RoHS compliant.  average life hours. Boxed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Capsylite 16728 Tungsten Halogen Lamp Capsylite 16731 Tungsten Halogen Lamp Capsylite 16737 Tungsten Halogen Lamp
Use indoor or out. Averages 1,500 life hours. 5.313" overall length. 10 degree beam angle. PAR-38, boxed. Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Use indoor or out. Averages 1,500 life hours. 5.313" overall length. 10 degree beam angle. PAR-38, boxed.
Capsylite 16735 Tungsten Halogen Lamp Osram Sylvania 16154 Tungsten Ecologic Halogen Lamp Capsylite 16119 Halogen Lamp
Averages 1,500 life hours. 5.313" overall length. 25 degree horizontal beam angle. 850 lumens. 99 CRI. State of the art SPL Optics. Ecologic, use indoor or out. PAR-38, 120 volt. Tungsten halogen bulb with brighter, more natural light. 25 degree beam angle. Replaces BR30 bulbs. 2,500 average life hours. 4-11/16" overall length. 120 volt, boxed. Use indoor or out. 3.625" overall length. 50 degree beam angle. Ecologic. 1500 average life hours. 120 volt, boxed.
Osram Sylvania 16153 Tungsten Halogen Lamp Osram Sylvania 16156 Tungsten Halogen Lamp Osram Sylvania 16117  Halogen Lamp
Use indoors or out. 4.625" overall length. 10 degree beam angle. Ecologic. Boxed. Use indoors or out. 50 degree beam angle. Ecologic. 120 volt. Use indoor or out. Tungsten bulb, 2,500 average life hours. 3-5/8" overall length. E-26 medium base.
Feit 35PAR38/QFL/ES Dimmable Halogen Lamp Feit 38PAR20/QFL/ES Dimmable Halogen Lamp Square D PK15GTACP Ground Bar Kits
Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 580 lumens, medium E26 base. Instant on to full brightness, dimmable. 5" height x 4.75" depth. Helps save energy compared to standard halogen bulb by adding Xenon gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 530 lumens, medium E26 base. Instant on to full brightness, dimmable. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Capsylite 16738 Tungsten Ecologic Halogen Lamp Osram Sylvania 10079 Tungsten Halogen Lamp Cutler-Hammer GBK14P Ground Bar Kits
Tungsten bulb, 1,500 average life hours. 5.3" overall length. Boxed. Improved lamp efficiency to meet EISA requirements, up to 33 percent energy savings over standard full wattage lamps. Familiar shapes. Crisp, vivid 100 CRI light, mercury free, instant on. Made in the USA. RoHS compliant.  average life hours. Boxed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Feit 35PAR30/S/QFL/ES Dimmable Halogen Lamp Feit 55PAR30/S/QFL/ES Dimmable Halogen Lamp Feit 70PAR38/QFL/ES Dimmable Halogen Lamp
Helps save energy compared to standard halogen bulb by adding Xenon gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 560 lumens, medium E26 base. Instant on to full brightness, dimmable. 50 watt equivalent. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable.
Feit 55PAR38/QFL/ES Dimmable Halogen Lamp BULB LED A21 DIM 16W 2700K    BULB LED A21 DIM 16W 5000K
Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Feit 85PAR38/QFL/ES Dimmable Halogen Lamp GE Electrical TFN60RCP AC Disconnect Switches Schneider PK18GTACP Ground Bar Kit
Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable. Steel enclosure. 2 pole, 3 wire, 240 volt AC, rated 10 HP. For central air conditioner. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. 4-3/4" x 7-1/2" x 2". UL1429 enclosure pullout switch, UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Siemens Energy ECGB10 Ground Bar Kits LED A15 827 4.5W/40W DIM 2700K LED A15 E26 850 4.5W/40W 5000K
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant.
Osram Sylvania 16745 Halogen Lamp Capsylite 15539 Tungsten Halogen Lamp A15 827 4.5W/40W CAND LED2700K
Averages 2,500 life hours. 5.31" overall length. State of the Art SPL Optics. Ecologic, use indoors or out. PAR-38, 70/120 volt, boxed. Tungsten bulb, ecologic. 5.31" overall length. 9 degree beam angle. State of the art SPL Optics. Boxed. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
A15 E17 4.5W 827 DIM LED 2700K A15 CAND 850 4.5W/40W LED5000K A15 E26 827 4.5W/40W LED 2700K
Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant.
Square D PK23GTACP Ground Bar Kits Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug Osram Sylvania 16129 Tungsten Halogen Lamp
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Use indoor or out. 3.625" overall length. 50 degree beam angle. Ecologic. 1500 average life hours. 120 volt, boxed.
Osram Sylvania 16127 Tungsten Ecologic Halogen Lamp Osram Sylvania 16552 Tungsten Double Life Halogen Lamp Feit BPAG1100DM/LED Dimmable LED Lamp
Use indoor or out. Silver reflector lamp, average 1,500 life hours. 3.625" overall length. 2900K, 99 CRI, 10 degree beam angle. Ecologic. Use indoors or out. 50 degree beam angle. Ecologic. 120 volt. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness.
BULB LIGHT LED 75W A21 5000K  BULB LIGHT LED 100W A19 5000K BULB LIGHT LED 100W A19 3000K
Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
Osram Sylvania 16166 Tungsten Halogen Lamp Osram Sylvania 16167 Tungsten Halogen Lamp Osram Sylvania 16168 Tungsten Halogen Lamp
Use indoors or out. 4.625" overall length. 10 degree beam angle. Ecologic. Boxed. Tungsten halogen bulb with brighter, more natural light. 25 degree beam angle. Replaces BR30 bulbs. 1,500 average life hours. 1070 lumens, 2900K. Boxed. Wide flood, 50 degree beam, E26 medium base. 1070 lumens, 2900K, 99 CRI, 3.752" diameter, 4.625 overall length.
Capsylite 16585 Tungsten Ecologic Double Life Halogen Lamp Capsylite 16580 Tungsten Double Life Halogen Lamp Capsylite 16748 Tungsten Ecologic Halogen Lamp
Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Heat resistant, hard glass, suitable for indoor and outdoor use. Operate only in porcelain or other socket approved for 80 watt PAR lamps. 80 watt 120 volt incandescent PAR 38 narrow floodlight, 1545 approximate lumens, 99 CRI, E26 reflector lamp, 2950K, medium skirted base, 25 degree beam angle, 6000 candlepower, 5.313" length.
Osram Sylvania 16747 Tungsten Halogen Lamp LED A15 827 6W/60W DIM 2700K  LED A15 MED E26 850 DIM 5000K
Tungsten bulb, 12 degree beam. 5-5/16" overall length. 2175 lumens, 120 volts. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs. 120 volts. Instant on to full brightness. RoHS Compliant.
Capsylite Designer 16 59034 Tungsten Ecologic Halogen Lamp Capsylite Designer 16 59031 Tungsten Ecologic Halogen Lamp Osram Sylvania 16113 Halogen Lamp
Medium base bulb. Tungsten halogen bulb replaces the regular R20 reflectors with halogen technology. 30 degree beam angle. 2,000 average life hours. 3-1/8" overall length. Boxed. Medium base bulb. Tungsten halogen bulb replaces the regular R20 reflectors with halogen technology. 30 degree beam angle. 2,000 average life hours. 3-1/8" overall length. Boxed. Use indoor or out. 39 watts, 120 volts. 5.313" overall length. 30 degree beam angle. 2900K. 120 volt, boxed.
A15 827 6W/60W CAND LED 2700K A15 E12 CAND 6W DIM LED 5000K Eaton DPU222RP Type ACD Non-Fusible Pullout Disconnect Switch
For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Single phase, 2 pole, 2 wire, 240 volt AC, galvanized steel enclosure with molded case switch. Rated 3 HP at 120 volt, 10 HP at 240 volt. For bottom entry and exit only. Heavy duty, high strength enclosure with welded and riveted construction. Swing-up cover remains in place when in open position, and includes provision for padlocking. 10,000 AIR. When pullout is in off position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.96-3258-4 pullout head replacement sold separately. #14-3 AWG wire range. 5-3/8" x 8-3/4" x 3-1/8". UL Listed file No.E5239.
Feit 38PAR20/QFL/ES/2 Dimmable Halogen Lamp Capsylite 16730 Tungsten Halogen Lamp LED A19 MED 850 7W FROST 5000K
Helps save energy compared to standard halogen bulb by adding Xenon gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 530 lumens, medium E26 base. Instant on to full brightness, dimmable. Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
A19 MED 850 7W CLEAR LED 5000K Capsylite 16744 Halogen Lamp Capsylite 16583 Tungsten Double Life Halogen Lamp
Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Halogen narrow flood, 850 approximate lumens, 3000 average rated life hours. E26 reflector lamp, 25 degree beam angle, 2825K, 100CRI, 5.313" length, 4.752" diameter.
Cutler Hammer GBK21P Ground Bar Kit Feit 35PAR38/QFL/ES/2 Dimmable Halogen Lamp Feit 55PAR38/QFL/ES/2 Dimmable Halogen Lamp
Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 580 lumens, medium E26 base. Instant on to full brightness, dimmable. 5" height x 4.75" depth. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable.
Feit 70PAR38/QFL/ES/2 Dimmable Halogen Lamp Feit 35PAR30/L/QFL/ES/ Dimmable Halogen Lamp Feit 55PAR30/L/QFL/ES/ Dimmable Halogen Lamp
Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable. Helps save energy compared to standard halogen bulb by adding Xenon gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, 560 lumens, medium E26 base. Instant on to full brightness, dimmable. 50 watt equivalent. Helps save energy compared to standard halogen bulb by adding XENON gas and enhancing the pressure of the capsule. Has the same light output and characteristics as standard incandescent light bulbs. 1,000 hours average life, 3000K, medium E26 base. Instant on to full brightness, dimmable.
A15 E17 6W 827 DIM LED 2700K  A15 E12 CAND 6W DIM LED 2700K LED A19 9.5W 830 MED DIM 3000K
Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness.
LED A19 9.5W 850 MED DIM 5000K Feit 60PAR16/QFL-130 Dimmable Halogen Lamp Siemens Energy WN2060U AC Disconnect Switches
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness. Used for track lighting. Beam spread 20 degrees. Medium (E26) base. 2,500 hours, 3,000K, 2.875" MOL. Single phase, 2 pole, 2 wire, 240 volt, rated 10 HP, steel enclosure. All lugs positioned for bottom entry and exit wiring. Easy mounting for quick installation. Pullout head can be replaced in off position. 10,000 AIR. 12 - 3 AWG al, 14 - 3 kcmil cu lug wire range. 5-5/32" x 7-5/16" x 2-7/32". UL Listed.
Siemens ECLK2125 Sub-Feed Lug Kit Capsylite 16739 Halogen Lamp Square D S106 Replacement Screw
Sub feed lug kit. 125 amp. 2 pole. Lugs to sub feed to another panel. Averages 3,000 life hours. 5.313" overall length. 25 degree beam angle. Use indoor or out. PAR-38, 120 volt, boxed Fit many types of service entrance devices and load center covers. Use them to replace lost or damaged screws.
BULB LED A19 27K 4PK 60W      BULB LED A19 5K 4PK 60W       BULB LED DIM A19 35K 4PK 60W
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Cutler-Hammer DPF221RP AC Disconnect Switches GE Electrical TPN60R1 AC Disconnect Switches Square D QO2L30SC Load Center
Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved. Suitable for use as service entrance equipment. Removable closing cap not included. Equipment ground. 14 - 3 AWG lug wire range. Designed to comply with code requirements for disconnecting central air conditioners and heat pumps. Open sides and top for quick installation. Impact and corrosion resistant GE Noryl thermoplastic resin. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. 5-3/4" x 8" x 3-1/8". UL1429 enclosed pullout switch, UL Listed. Main lug load center, indoor, 30 amp, 2 spaces/2 circuits. Accommodates both overhead and underground feed applications. 1" maximum knockout on the top and bottom of the enclosure. Comes with a doorless surface mount cover and factory installed main lugs. UL Listed.
GE Electrical TF60RCP AC Disconnect Switches Homeline Square D HOM24L70S Load Center Homeline Square D HOM24L70F Load Center
Steel enclosure. 2 pole, 3 wire, 120/240 volt AC, rated 10 HP. Uses cartridge fuses. For central air conditioner. Designed to comply with code requirements for disconnecting means within sight of central air conditioners and heat pumps. Removable closing cap not included. Equipment ground. 14-3 AWG lug wire range. 6-1/2" x 9" x 3-1/4". UL869 service equipment, UL Listed. Main lug indoor load center, 70 amp, 2 spaces/4 circuits. Maximum SCCR of 10,000 and a maximum load of 240 volts. NEMA type 1 enclosure. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers. Main lug indoor load center, 70 amp, 2 spaces/4-circuits. NEMA type 1 enclosure with a flush mount cover. Overhead or underground feeds with 1-1/4" knockouts in both the top and bottom endwalls. Compatible with Homeline 1 pole and tandem breakers and a PK3GTA1 ground bar kit (not included). UL Listed.
Cutler-Hammer AC222URNMP-A2 AC Disconnect Switches Eaton BR24L70SP Load Center Eaton BR24L70FP Load Center
Single phase, 2 pole, 2 wire, 240 volt AC. Rated 3 HP at 120 volt, 10 HP at 240 volt. For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. Swing-up cover remains in place when in open position, protective shield can be removed for access to fuses. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8-5/8" x 3-1/2". UL Listed file No. E5239. Steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 2 (1") spaces, 4 poles, 120/240 volt. No.GBK5 or GBK520 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box 4-1/2" x 9-7/16" x 3". UL Listed file E8741. Single phase, 3 wire, insulated/bondable neutral, 2 (1") spaces, 4 poles, 120/240 volt AC. No. GBK5 or No. GBK520 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box 4-1/2" x 9-7/16" x 3". UL Listed file E8741.
Square D L211N Safety Switches PowerMark Gold TL412C Standard Load Center Cutler Hammer BRL200 Main Lug Kit
Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. Typical uses include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. 5.00" x 7.63" x 4.00". UL Listed, meets NEMA standard KS1. Single-phase, three-wire, 120/240 volt AC. (4) 1" circuits or (8) 1/2" circuits. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. Minimum 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100 per cent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE's exclusive 1/2" THQPs. 10,000 AIC. 40 - 225 amp single phase devices have removable closing caps. TL load center enclosures are galvanized steel. 7-1/4" x 9" x 3". UL Listed. Two pole - 200 amp - pair.
Square D L111N Fusible Light Duty Safety Switch Square D QO200TRCP Molded Non-Fusible Disconnect Switch Eaton CH2L70SP Load Center
Single phase, 1 pole, 2 wire, solid neutral, 120/240 volt AC. Rated 2 HP at 120 volt AC, with metallic enclosure. Typical loads include workshop or hobby room, water heater, furnace, garage or well pump disconnect. 10,000 AIC (short circuit rating) with plug fuses. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. 5.00" x 7.63" x 4.00". For use with 75 degree Celsius wire. 2 pole, 2 wire, 240 volt AC, rated 10 HP, steel enclosure with molded case. With reliable, quick-make, quick-break operating mechanism. Suitable for use on systems with up to 10,000 RMS symmetrical amp available fault current at 240 volt AC maximum when protected by a fuse or circuit breaker rated 60 amp or less. Does not contain overcurrent protection. Ground bar bonded to back. 4-5/8" x 6-1/2" x 3-7/8". UL Listed. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 2 (3/4") spaces, 4 poles with CHNT breakers, 120/240 volt. Ground bar No. GBK5 or No. GBK520 sold separately. Solid copper bus bar and branch fingers. In service entrance application, where neutral is bonded, unused neutral connections may be used for termination of equipment grounds. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. #14 - 2 main lug wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 5 box - 4-1/2" 9-1/2" x 3-1/8". UL Listed file E8741.
Murray LC004NSU Load Center Square D QO24L70S Load Center Eaton BR48L125FP Load Center
Single phase - 3 wire; 120/240 volt;  8 circuits maximum with 4 - 1" spaces. 14" length x 8-1/2" width x 3-1/4" depth. 10,000 AIC. UL listed. Main lug load center, intended for fixed applications. 70 amp, 2 spaces/4 circuits. Surface mount cover with door and a NEMA type 1 enclosure for indoor use. Single phase unit, features a copper bus for conductivity and is rated for up to 10,000 SCCR. ANSI Certified and UL Listed. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 4 (1") spaces, 8 poles, 120/240 volt. No.GBK10 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service application. #14 - 1/0 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Cutler-Hammer DPF222RP AC Disconnect Switches LED A21 24W/150W MED DIM 5000K PowerMark Gold TLM612FCUD Standard Convertible Load Center
Air conditioning disconnect, pullout, fused, 2-pole, 120/240 volt AC. Wire size range of  #14-3 Cu or Al at 60 or 70 degrees C. Metallic color galvanized steel enclosure, 9" x 5.5" x 3". NEMA 3R, rainproof. UL Listed, CSA Approved. Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free. Indoor flush or surface mount with door. Box is significantly smaller and lighter while maintaining optimum wire-bending space. Side mounted main  breaker allows top or bottom feed. Sturdy copper bus and galvanized box increase durability and reliability; tinplated for corrosion resistance. Minimum 100 per cent neutral terminations. All neutral holes rated for 14-4 wire. Extruded neutrals are easier to wire, reducing installation time and cost. Combination slotted/Robertson screws speed wiring. Accepts GE Q-Line branch circuit breakers, including GE's exclusive 1/2" THQPs. Interior removes and reinstalls easily. Main breaker not included. (6)  1" circuits or (12)  1/2"  circuits. 12-5/8" x 12-3/8" x 3-3/8". UL Listed.
LED A21 24W/150W MED DIM 3000K Eaton BR48L125SP Load Center Homeline Square D HOM612L100S Load Center
Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 4 (1") spaces, 8 poles, 120/240 volt. No. GBK10 ground bars and doors sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service application. #14 - 1/0 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741. Main lug indoor load center, 100 amp,  6 space/12 circuit. NEMA type 1 enclosure.  Single phase, 3 wire, solid neutral. Expandable loadcentre capacity with the use of tandem or quad breakers. CSA approved for vertical, horizontal or inverted mounting. Accepts aluminum or copper conductors. Approved to only accept Canadian HomeLine breakers.
Homeline Square D HOM612L100F Load Center Cutler-Hammer DP221NGB Safety Switches Cutler-Hammer ACD221RNMP AC Disconnect Switches
Main lug indoor load center, 100 amp, 6 space/12 circuit. 1-1/2" knockouts in the top and bottom end walls to allow for use with either overhead or underground fed electrical wiring. 22,000 short circuit current rating (SCCR) and can be fitted with a secondary surge arrestor (not included) for added protection. Single phase, 3 wire, solid neutral. UL Listed. Steel enclosure. 2 pole, 3 wire, general duty safety switch, plug fuse type, (Type S, T, OR W) fusible with neutral NEMA 1. 120/240 volt rating. 1/2 HP at 120 volt, 1-1/2 HP at 240 volt. Does not have an interlock to prevent opening when switch is in the on position. UL Listed. Single phase, 2 pole, 2 wire, 240 volt AC, non-metallic enclosure. Rated 1-1/2 HP at 120 volt, 3 HP at 240 volt with time delay fuses (uses class H cartridge fuses, not included). For top and bottom entry and exit, with provision for type H conduit hub. Heavy duty, high strength, rugged polymer enclosure with UV resistant features. 10,000 amp RMS symmetrical interrupting rating. Suitable for use as service entrance equipment with ground bar. No.GB4 ground bar and No.360-011-24 pullout head replacement sold separately. #14-2 AWG wire range. 5" x 8.63" x 3.5". UL Listed file No. E5239.
Eaton BR24L70RP Load Center Siemens E0204ML1060SU Load Center Eaton BR612L125FDP Load Center
Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 2 (1") spaces, 4 poles, 120/240 volt AC. With closure plates, hubs and No.GBK5 or GBK520 ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #8 - #2 wire range. Electrostatic powder coat, baked urethane painted. 4-1/2" x 9-7/16" x 3". UL Listed file E8741. Style 5R box. Single phase, 3 wire, solid neutral, 2 spaces and 4 circuits maximum 1-pole, 1 QP breaker maximum 2-pole, 120/240 volt AC. 10,000 AIR. One piece plated aluminum bus bar, heavier main bus for cooler operation, direct cable connection to bus bar. Main lugs and neutral on same plane, same drive tool. 100 percent circuit breaker twistouts. Positive load side circuit breaker hook rail. When used as service equipment, any unused neutral position may be used for equipment grounding. Simple upper pan adjustment after trim is installed for flush leveling. Rotate entire device 180 degrees for bottom feed. Gray enamel finish. UL Listed, complies fully with NEC and UL requirements for Class CTL. 5-1/8" x 9-7/8" x 2-5/8". Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 6 (1") spaces, 12 poles, 120/240 volt. Furnished with door; No. GBK10 ground bar sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. Number 14 - number 1 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Siemens E0408ML1125SU Load Center Square D QO612L100SCP Load Center Square D QO612L100FCP Load Center
Code-gauge steel enclosure. Single phase, 3 wire, solid neutral, 4 spaces and 8 circuits maximum 1-pole, 2 QP breakers maximum 2-pole, 120/240 volt. 10,000 AIR. One piece plated aluminum bus bar. 100 percent circuit breaker twistouts. Positive load side circuit breaker hook rail. Suitable for use as service equipment when a main breaker (100 amp maximum) is back-fed in a branch position and used with main breaker retainer clip No.MBR1. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 degrees for bottom feed. Gray enamel finish. 6-5/8" x 12-5/8" x 3-1/2". UL Listed, complies fully with NEC and UL requirements for Class CTL. Main lug indoor load center, 100 amp, 6 spaces/12 circuits. 1-1/2" maximum knockouts in the top and bottom end walls for overhead or underground feed. NEMA type 1 for indoor use. Steel enclosure. Single phase, solid neutral. UL Listed. Main lug indoor load center, 100 amp, 6 space/12 circuit, intended for use in fixed applications. NEMA type 1 enclosure and a copper bus bar for conductivity. Single-phase, rated for up to 240 volts and has a 10,000 maximum SCCR. UL Listed.
Homeline Square D HOM24L70RB Load Center Square D D211NCP Safety Switches Eaton BR816L125FP Load Center
Main lug outdoor load center, 70 amp, 2 space and 4 circuit. NEMA type-3R enclosure with a rainproof cover for outdoor use. Class 1170 unit is intended for use in fixed applications and can accommodate overhead or underground feed. Maximum SCCR of 10,000. ANSI Certified and UL Listed. Single phase, 2 pole, 3 wire, 2 blades and fuseholders, factory installed solid neutral, 120/240 volt AC. With metallic enclosure for indoor use. Designed to open or close an electrical circuit in general duty applications. Rated 1-1/2 HP. For residential or commercial applications. For PK3GTA-1 field installable service ground bar kit. With plug type fuse protection. Lugs suitable for aluminum or copper conductors. Spring reinforced plated copper fuse clips. ANSI Certified and UL Listed. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 8 (1") spaces, 16 poles, 120/240 volt. No.GBK10 ground bar and door sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #14 - #1 AWG wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Square D L221N Safety Switches Eaton DPB222RP Type ACD Molded Non-Automatic Breaker Disconnect Switch Eaton BR612L125RP Load Center
Single phase, 2 pole, 3 wire (2 blades, fuseholders and 1 neutral), 120/240 volt AC. Rated 3 HP at 240 volt AC, with metallic enclosure. 10,000 AIC (short circuit rating) with class H cartridge fuses. NEMA type 1 enclosure. Terminal lug data: (1) #12 - 6 Al or #14 - 6 Cu. wire. Service ground bar kit PKGTA1 sold separately. Padlock attachment for lock off. UL Listed, meets NEMA standard KS1. Air conditioning disconnect, molded case switch looks like a circuit breaker but operates like an ordinary household light switch. 60 amp, 2-pole, 240 volt AC. Metallic, galvanized steel enclosure, NEMA 3R, rainproof. Packaged for retail sale. Wire size range Cu or Al at 60 or 70 degrees C: #14-3. UL Listed, CSA Approved. Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 6 (1") spaces, 12 poles, 120/240 volt AC. With closure plates, hubs and No.GBK10 ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #14-#1 wire range. Electrostatic powder coat, baked urethane painted. Style 7R box 11" x 13" x 3-9/16". UL Listed file E8741.
Murray LW002GRU Load Center PowerMark Gold TL270RCUP Standard Load Center PowerMark Gold TL240RCU Standard Load Center
Single phase - 3 wire; 120/240 volt;  4 circuits maximum;  2 - 1" spaces ; 10,000 AIC. 9-1/4" x 6-5/8" x 3-3/8". UL Listed. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. Minimum 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100-percent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE's exclusive 1/2"  THQPs. (2) 1" or (4 )1/2" spaces; 22,000 AIC. Single-phase, three-wire, 120/240 Volt AC. 7-1/4" x 10" x 3-3/4". Single-phase, three-wire, 120/240 volt AC. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100 per cent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE 1/2" THQP. (2) 1" or (4) 1/2"  spaces; 22,000 AIC. 7-1/4" x 10" x 3-31/4".
PowerMark Gold TLM812SCUDP Standard Convertible Load Center Siemens Energy LF211NU Safety Switches Eaton BR816L125SDP Load Center
Box is significantly smaller and lighter while maintaining optimum wire-bending space. Side mounted main breaker allows top or bottom feed. Sturdy copper bus and galvanized box increase durability and reliability; tinplated for corrosion resistance. Minimum 100 per cent neutral terminations. All neutral holes rated for 14-4 wire. Extruded neutrals are easier to wire, reducing installation time and cost. Combination slotted/Robertson screws speed wiring. Accepts GE Q-Line branch circuit breakers, including GE's exclusive 1/2" THQPs. Interior removes and reinstalls easily. Main breaker not included. (8) 1" circuits or (16) 1/2" circuits. 11-9/16" x 11-3/8" x 3-3/8". UL Listed. Single phase, 2 pole, 3 wire, solid neutral, 120/240 volt. 10,000 AIC with plug fuses (not included). Metallic enclosure. Rated 1-1/2 HP standard/3 HP maximum. Compact size, quick-make, quick-break mechanism. Suitable for use as service entrance equipment. Cover interlock. Bottom cable entry and exit only, no hub provision supplied. Padlocking provision to lock cover closed or to lock in off position. Lugs suitable for copper or aluminum. Silver plated copper conductors. #14-6 AWG line, #14-8 load lug wire ranges. 5-1/2" x 8-1/4" x 5-13/16". UL Listed file No.E4776, NEMA type GD, meets federal specifications WS865C. Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 8 (1") spaces, 16 poles, 120/240 volt. Furnished with door. Ground bar No.GBK10 sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting or appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #14-#1 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Eaton BR48L125RP Load Center PowerMark TPL412RP Standard Load Center Eaton BR612L125SP Load Center
Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 4 (1") spaces, 8 poles, 120/240  volt AC. With closure plates, hubs, and No.GBK10 ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #14-1/0 wire range. Electrostatic powder coat, baked urethane painted. Style 7R box 11" x 13" x 3-9/16". UL Listed file E8741. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. Minimum 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100 per cent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE's exclusive 1/2"  THQPs. (4) 1" or (8)  1/2"  spaces; 10kAIC. Single-phase, Three-wire, 120/240 volt AC. 7-1/2" x 9-7/32" x 3-5/16". Steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 6 (1") spaces, 12 poles, 120/240 volt. No.GBK10 ground bar and door sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when a main breaker is used or when not more than 6 service disconnecting mains are provided and when not used as a lighting and appliance panelboard. Neutral is movable to other side. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance appliance. #14 - #1 wire range. Electrostatic powder coat, baked urethane painted. Rotate 180 degrees for bottom feed. Style 7 box - 11" x 13" x 3-9/16". UL Listed file E8741.
Murray LW004NRU Load Center Siemens EQ W0204ML1060U Load Center Eaton BR24L125RP Enclosed Load Center
Convertible to main breaker using double pole breaker. 2 full spaces. 4 space, 8 circuit, combination mount. Single phase, 3 wire, solid neutral, 2 spaces and 4 circuits maximum 1-pole, 1 QP breaker maximum 2-pole, 120/240 volt AC. 10,000 AIR. With closure plates, HS style hubs sold separately, uses ECHA075 (694.3559) Hub. One piece plated aluminum bus bar. 100 percent circuit breaker twistouts. Will not accommodate 2-pole GFCI or circuit breaker with shunt trip. Positive load side circuit breaker hook rail. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 degrees for bottom feed. Gray enamel finish. CSA and UL Listed, complies fully with NEC and UL requirements for Class CTL. 5" x 8" x 4-1/4". Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable movable neutral, 2 (1") spaces, 4 poles, 120/240 volt AC. With closure plates, hubs and No.GBK5 or GBK520 ground bar kits (necessary for sub-feeding) sold separately. Tin-plated aluminum bus bar. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. When bonded, unused neutral connections may be used for equipment ground protectors in service entrance application. #14-1/0 wire range. Electrostatic powder coat, baked urethane painted. Style 6R box 6-7/8" x 12" x 4-1/2". UL Listed file E8741.
Capsylite 16740 Tungsten Ecologic Halogen Lamp Cutler-Hammer DG221NGB Safety Switches PowerMark Gold TLM812FCUD Standard Convertible Load Center
Tungsten bulb, 1,500 average life hours. 1070 lumens, 2900K. 25 degree beam angle. 5.313" overall length. PAR-38, 120 volt, boxed. Steel enclosure. 2 pole, 3 wire, 2 blades, 2 class H cartridge fuses (not included), solid neutral, 120/240 volt AC. Rated 1-1/2 to 3 HP single phase, 3 to 7-1/2 HP 3-phase at 240 volt only when dual element fuses are used. For residential and commercial applications. Suitable for light duty motor circuits and service entrance. For use on systems capable of delivering up to 10,000 RMS, symmetrical fault current. Bolt on hub provided. DS100GK ground kit sold separately. 6-1/6" x 7-1/2" x 6-3/4". UL Listed file No.E5239; meets UL98 for enclosed switches and NEMA standard KS1. Box is significantly smaller and lighter while maintaining optimum wire-bending space. Side mounted main breaker allows top or bottom feed. Sturdy copper bus and galvanized box increase durability and reliability; tinplated for corrosion resistance. Minimum 100 per cent neutral terminations. All neutral holes rated for 14-4 wire. Extruded neutrals are easier to wire, reducing installation time and cost. Combination slotted/Robertson screws speed wiring. Accepts GE Q-Line branch circuit breakers, including GE's exclusive 1/2" THQPs. Interior removes and reinstalls easily. Main breaker not included. (8) 1" circuits or (16) 1/2" circuits. 12-5/8" x 12-3/8" 3-3/8". UL Listed.
Siemens EQ W0408ML1125U Load Center LOAD CENTR 125A 8SP 16C INDOOR POWER OUTLET 50A 14-50R CON PK
Code-gauge steel enclosure. Single phase, 3 wire, solid neutral, 4 spaces/8 circuits 1-pole, 2 QP breakers 2-pole, 120/240 volt AC. 10,000 AIR. With closure plates, HS-hubs sold separately. One piece plated aluminum bus bar. 100 percent circuit breaker twistouts. Positive load side circuit breaker hook rail. Suitable for use as service equipment when a main breaker (100 amp maximum) is back-fed in a branch position and used with main breaker retainer clip No.MBR1. When used as service equipment, any unused neutral position may be used for equipment grounding. Rotate entire device 180 degrees for bottom feed. Gray enamel finish. CSA and UL Listed, complies fully with NEC and UL requirements for Class CTL. 6" x 12-1/4" x 4-1/4". Value kit, indoor. Includes a sturdy highly-conductive tin-plated copper buss bar and a rust-resistant galvanized box. Indoor NEMA 1 enclosure with combination surface/flush front. Factory-installed main lug, full-length neutral bars, top or bottom feed and self-adjusting, dead-front cover. One-piece interior removes and re-installs easily. Single-phase, 3-wire, 120/240-volt and 22K AIC rating. All holes are rated for 14-4 wire and 100 percent rated split neutrals on each side. Accepts Q-Line THQL standard, GFCI and AFCI circuit breakers, including GE's exclusive 1/2" THQPs. UL Listed and ANSI Certified. 16" height x 14" width x 3.375" depth, 16.79 lb. Temporary RV power outlet is factory-assembled and factory-tested. Ready to use with no need to assemble individual parts. Single, heavy-gauge welded flange NEMA 3R rainproof enclosure protects against weather, vandalism and nuisance tripping. It is lockable and is engineered for maximum protection of receptacles, cords, plugs and breakers. All-in-one construction for factory assured terminations. Rolled edge door for cord protection. Manufactured from heavy G-90 zinc coated steel which resists corrosion and fading. Complies with National Electrical Code and OSHA requirements. 7" height x 5.5" width x 5.25" depth, 4.06 lb.
Murray LC008DSU Load Center Square D HOM816L125PC Homeline Main Lug Load Center BULB LED A19 ULTRA 27K 4PK 75W
Single phase type 1 with 8-1" spaces, 16 circuits. Use neutral lug kit DLK1 or DLK2 as required. Indoor closure with door. Main lug indoor load center. Convertible to a main breaker with a QOM1 main breaker. Single-phase load center, NEMA type 1 enclosure, combination flush/surface indoor cover. Overhead or underground feed options. Plated aluminum bus bar. UL Listed. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
BULB LED A19 ULTRA 5K 4PK 75W BULB LED A19 ULTRA 35K 4PK 75W GE TL412R1P Standard Load Center
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. One-piece interior removes and reinstalls easily. Full-length neutrals are easier to wire, reducing installation time and cost. 100 percent neutral terminations. Sturdy copper bus and galvanized box increase durability and reliability. Combination slotted/Robertson screws speed wiring. All holes are rated for 14-4 wire. 100 per cent rated split neutral on each side. Load centers accept Q Line circuit breakers, including GE's exclusive 1/2" THQPs. (4) 1" or (8) 1/2"  spaces. Single-phase, three-wire, 120/240 Volt AC. 7-1/4" x 10" x 3-3/4".
Eaton CH2L70RP Load Center BULB LED A21 5K 4PK 100W      BULB LED A21 35K 4PK 100W
Rainproof galvanized steel enclosure. Single phase, 3 wire, insulated/bondable neutral, 2 (3/4") spaces, 4 poles with CHNT breakers, 120/240 volt AC. With closure plates, hubs and ground bar No.GBK5 or No.GBK520 sold separately. Copper bus bar. In service entrance application, where neutral is bonded, unused neutral connections may be used for termination of equipment grounds. In accordance with NEC, suitable for use as service equipment when not more than 2 service disconnecting mains are provided or when not used as a lighting and appliance panelboard. #14 - 2 main lug wire range. Electrostatic powder coated. Style 5R box 4-1/2" x 9-1/2" x 3-1/8". UL Listed file E8741. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
PowerMark Gold TLM1212CCU Standard Convertible Load Center