Home > ELECTRICAL > ROUGH ELECTRICAL > SWITCHES & RECEPTACLES > TOGGLE SWITCHES
Choose a sub category:
LIGHT FIXTURES LAMP & FAN PARTS CABINET & SPECIALTY LIGHTING
FLOURESCENT & LED LIGHTING LANDSCAPE LIGHTING CEILING FANS
Sort By:
1
Feit Q40G25 Dimmable Halogen Lamp Feit Q40G25/W Dimmable Halogen Lamp Feit BPQ50T4/JCD Dimmable Halogen Lamp
Instant on to full brightness.G25 bulb shape. 120 volt, 600 lumens, 1500 average life hours. Instant on to full brightness.G25 bulb shape. 120 volt, 600 lumens, 1500 average life hours. Compact and dimmable, used for desk lamps and more. 2,000 average life hours. 120 volt.
Feit BPQ35T4/JCD Dimmable Halogen Lamp Osram Sylvania 14952 Incandescent Lamp HomeLine HOM140CP Standard Circuit Breaker
Compact and dimmable, used for desk lamps and more. 2,000 average life hours. 120 volt. Should be shielded against moisture falling on glass bulb when hot. 6-1/2" overall length, 5" diameter. 100CRI, 2850K. 125W, 120V, 5,000 hour average life. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
Feit BPQ25EFC/2 Dimmable Halogen Lamp HomeLine HOM130CP Standard Circuit Breaker HomeLine HOM115CP Standard Circuit Breaker
For chandelier and decorative use. Clear, 120 volt, 1500 average life hours, 310 lumens, 3000K. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
HomeLine HOM120CP Standard Circuit Breaker MES Q115 Standard Miniature Circuit Breaker MES MP115 Type MP-T Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole. One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR.
MES MP130 Type MP-T Circuit Breaker MES Q120 Standard Miniature Circuit Breaker MES Q130 Standard Miniature Circuit Breaker
One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole. Non-interchangeable trip. 120 volt AC; 10,000 AIR. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, HACR rated. 15 and 20 amp UL Listed for frequent switching applications, 120 volt AC fluorescent lighting.  1" per pole.
MES MP120 Type MP-T Circuit Breaker GE THQL1120 Type THQL Q-Line Standard Circuit Breaker GE THQL1130 Type THQL Q-Line Standard Circuit Breaker
One 1" space per pole. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (Full size only), General Switch, I-TE, Gould, Montgomery Ward and Sears. UL Listed, SWD rated. 120 volt AC fluorescent lighting. 120 volt AC; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQL1115 Type THQL Q-Line Standard Circuit Breaker GE THQP130 Type THQP Q-Line Standard Circuit Breaker GE THQP120 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR.
GE THQP115 Type THQP Q-Line Standard Circuit Breaker Eaton BR115 Type BR Miniature Circuit Breaker Eaton BR120 Type BR Miniature Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
Gardner Bender GSW Standard Toggle Switch HomeLine HOM115C Miniature Standard Circuit Breaker HomeLine HOM130C Miniature Standard Circuit Breaker
Medium-duty bat handle-screw type terminal. 6" wire leads. Smaller toggle switch for limited space applications. Frame and support are steel with zinc chromate. On/off sequence, has an on/off faceplate. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed.
HomeLine HOM120C Miniature Standard Circuit Breaker Gardner Bender GSW Standard Toggle Switch Eaton BR130 Type BR Miniature Circuit Breaker
Single-pole 1" circuit breaker features 10,000 AIR and 120/240 VAC. Uses a thermal-magnetic tripping mechanism for overload and short-circuit protection. Compatible with Homeline load centers and CSED devices. ANSI certified and UL Listed. Heavy-duty terminal. On-Off operation. Motor rated. 20 amp at 125 volts AC, 10 amp at 277 volts AC. 1/2" mounting hole. UL Listed. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole.
Eaton BR140 Type BR Miniature Circuit Breaker Eaton BR150 Type BR Miniature Circuit Breaker Feit BPQ40CFC/2 Dimmable Halogen Lamp
Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. Switching duty rating. Thermal magnetic 40 degrees C. Interchangeable, will replace: Bryant, Westinghouse and Challenger. Type BR. 120/240 volt, 10,000 AIR. 1" per pole. For chandelier and decorative use. Energy saving, clear. Instant on to full brightness. 120 volt, 3,000K, 600 lumens, 1,500 average life hours.
Feit BPQ40EFC/2 Dimmable Halogen Lamp Feit BPQ40G161/2 Dimmable Halogen Lamp GE THQL1140 Type THQL Q-Line Standard Circuit Breaker
For chandelier and decorative use. Energy saving, clear. Instant on to full brightness. 120 volt, 3,000K, 600 lumens, 1,500 average life hours. Decorative clear Halogen bulb. Instant on to full brightness. Full range dimming. 120 volts, 570 lumens, 3000K, 1500 average life hours. 2.3" MOL x 1.5" diameter. UL/CUL Listed, FCC Compliant. 100 percent mercury free. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR.
GE THQL1150 Type THQL Q-Line Standard Circuit Breaker GE THQP150 Type THQP Q-Line Standard Circuit Breaker GE THQP140 Type THQP Q-Line Standard Circuit Breaker
Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Type THQL - 1" per pole. May be used, when marked to accept, with American Switch, Arrow Hart, Bryant, General Switch, GTE, Sylvania, most ITE, Murray, Westinghouse Type BR, Challenger and Crouse-Hinds. 15 to 30 amp 14 - 8 Cu or 12 - 8 Al AWG wire, 35 to 60 amp 8 - 3 Cu or 8 - 2 Al AWG wire. UL Listed, HACR rated. 1" module, 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR. Copper-to-copper connections, calibrated for optimum trip performance, heat resistant thermoset cases and covers, cemented calibration screw. Nearly identical to Type THQL with the same design and performance, yet only taking up 1/2 the space,  1/2" per pole. UL Listed, HACR rated. 15 and 20 amp SWD, switching duty rated, suitable for 120 volt fluorescent lighting loads. 15 to 25 amp #14 - 8 Cu or #12 - 8 Al AWG wire, 30 to 50 amp #8 - 4 Cu or #8 - 2 Al AWG wire. 3-9/32" height x 1/2" width x 2-3/8" depth. 120/240 volt; 10,000 AIR.
Jandorf 61155 Toggle Switch Nut Gardner Bender GSW-12 Toggle Switch Gardner Bender GSW-120 Toggle Switch
Thread size M12x1-6H. Thickness 2.5mm O.D. 14mm. Heavy-duty screw type terminal. Brass terminals, frame and support are steel with zinc chromate, case is black phenolic plastic, external parts are brass/bright nickel. Motor rated. Heavy-duty spade type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation.
GB-Gardner Bender GSW-20 Toggle Switch Covers Jandorf 61157 Toggle Switch Plate Gardner Bender GSW Toggle Switch
Tough EDPM rubber covers protects switches from moisture, dust and dirt. Built-in hex nut base screws onto all GB toggle switches. On/off markings. Heavy-duty, screw type terminal. Double insulated for moisture protection in all environments. Internal "O" ring design for moisture and dust resistance. Perfect for marine/recreational equipment and weather resistant applications.
Gardner Bender GSW Toggle Switch Gardner Bender GSW Toggle Switch Gardner Bender GSW Canopy Toggle Switch
Medium-duty bat handle-screw type terminal. S.P.S.T. smaller constructed toggle switches for limited space applications. Frame and support are steel with zinc chromate. Brass terminals. On/Off sequence also has an On/Off faceplate. Heavy-duty terminal. On-Off operation. Motor rated. 20 amp at 125 volts AC, 10 amp at 277 volts AC. 1/2" mounting hole. UL Listed. Plastic case and switch. Heavy-duty spade type terminal. Double insulated for moisture protection in all environments, internal "O" ring design for moisture and dust resistance. Momentary contact in either direction. Use for marine/recreational equipment or any weather-resistant application. UL/CSA Rated.
Osram Sylvania 57033 Tungsten Single Ended Halogen Lamp Jandorf 61149 Double Circuit Toggle Switch Eaton CL115 Type CL Circuit Breaker
Clear finish tungsten halogen bulb. 2,000 average life hours. Jandorf Toggle Switch, Double Circuit, Series: 61149, 120 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space.
Eaton CL130 Type CL Circuit Breaker Eaton CL120 Type CL Circuit Breaker Gardner Bender Professional GSW-14 Toggle Switch
Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Wire size range #14-4. Type CL replacement breakers, classified as direct replacements by Underwriters Laboratories for Square D HOMELINE, General Electric, Crouse-Hinds, Thomas & Betts, Murray and ITE/Siemens loadcenters. 120/240 volt AC, 10,000 AIC. Requires one 1-Inch (25.4 mm) space. Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation.
Jandorf 61166 Single Circuit Toggle Switch Gardner Bender Professional GSW-16 Toggle Switch Gardner Bender GSW Toggle Switch
Jandorf Toggle Switch, Single Circuit, Series: 61166, 125 V, 10 A, On/Off/On, Contact Configuration: SPDT, 1 Poles, 3-Screw Terminal, UL Listed Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation. Heavy-duty screw type terminal. Versatile toggle switch family with multiple position configurations. Ideal for industrial equipment, automotive or emergency lighting. 1/2" mounting hole required. All switches must be installed with a hex nut (provided) behind panel to prevent damage during installation.
Jandorf 61132 Double Circuit Toggle Switch Jandorf 61156 Toggle Switch Plate Jandorf 61140 Single Circuit Toggle Switch
Jandorf Toggle Switch, Double Circuit, Series: 61132, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed On/off markings. Jandorf Toggle Switch, Single Circuit, Series: 61140, 125 V, 15 A, On/Off/On, Contact Configuration: SPDT, 1 Poles, 3-Tab Terminal, UL Listed
Jandorf 61018 Snap-In Toggle Switch Jandorf 61148 Double Circuit Toggle Switch Jandorf 61135 Double Circuit Toggle Switch
Jandorf Toggle Switch, Snap-In, Series: 61018, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2 Positions, 2-Screw Terminal, White, UL Listed Jandorf Toggle Switch, Series: 61148, 125 V, 10 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Tab Terminal, Double Insulation, UL Listed Jandorf Toggle Switch, Double Circuit, Series: 61135, 125 V, 4 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Wire Terminal, UL Listed
Area Lighting CPGI-ALR-ACL-11 Photocontrol Osram Sylvania 14664 Infrared Incandescent Lamp AmerTac SLC4CB-4 Dusk to Dawn Light Control Socket
Converts manually operated interior table lamps to dusk-to-dawn lighting. Plug the control into any interior 120 volt outlet. For incandescent loads only. Standard base. Infrared glass bulb. 6-1/2" overall length. Operate only in porcelain sockets. Should be shielded against moisture falling on bulb. May not give satisfactory performance if any accessory lighting equipment touches the glass bulb. Indoor/outdoor dusk to dawn light control for incandescent bulbs. Fixed light shutter. 150 watts maximum. Plastic housing. Screw-in connection. 2.2" x 1.5" x 1.5".
Feit 250R40/R Dimmable Incandescent Lamp Area Lighting CPGI-ALR-PL-120S- Photocontrol Jandorf 61112 Double Circuit Toggle Switch
Standard brass base resists vibration and corrosion. 6-1/2" overall length. 250 watt, 120 volt. Designed for indoor or outdoor use and has a small profile that fits into most table lamps or outdoor post lanterns. 120 volt with a range of  105-130 volts, 150 watt tungsten load rating. Jandorf Toggle Switch, Double Circuit, Series: 61112, 12 V, 20 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Tab Terminal, Black, UL Listed
Jandorf 61117 Toggle Switch Jandorf 61118 Toggle Switch Jandorf 61310 Toggle Switch
Jandorf Toggle Switch, Series: 61117, 12 V, 20 A, On/Off/On, Contact Configuration: SPDT, 1 Poles, 3-Tab Terminal, Black, UL Listed Jandorf Toggle Switch, Series: 61118, 12 V, 20 A, On/On, Contact Configuration: SPDT, 1 Poles, 3-Tab Terminal, Black, UL Listed Single pole, single throw, off/terminate. Rated: 21A-14VDC
Jandorf 61168 Ball Double Circuit Toggle Switch AmerTac SLC5BCW-4 Dusk to Dawn Light Control Socket Jandorf 61161 Toggle Switch Boot
Jandorf Toggle Switch, Ball Double Circuit, Series: 61168, 125 V, 3 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Wire Terminal Outdoor/indoor dusk to dawn light control. Turns compact fluorescent, LED, halogen, and incandescent bulbs on at dusk, off at dawn. Includes removable lens shield to block light reflection, reducing blinking. 150 watts maximum. Plastic housing. Screw-in connection. Protects toggle switch. Thread Size 15/32-32NS-2B.
Jandorf 61109 Double Circuit Toggle Switch Jandorf 61110 Single Circuit LED Toggle Switch Square D QO140CP Type QO Standard Circuit Breaker
Jandorf Toggle Switch, Double Circuit, Series: 61109, 12 V, 20 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Tab Terminal, Silver, UL Listed Jandorf LED Toggle Switch, Single Circuit, Series: 61110, 12 V, 20 A, Off/On, Contact Configuration: SPST, 1 Poles, 3-Tab Terminal, UL Listed Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO150CP Type QO Standard Circuit Breaker Square D QO115CP Type QO Standard Circuit Breaker Square D QO120CP Type QO Standard Circuit Breaker
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Square D QO130CP Type QO Standard Circuit Breaker Square D QO115C Miniature Standard Circuit Breaker Square D QO120C Miniature Standard Circuit Breaker
Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres. Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
TOGGLE DPDT MOMEN 20A O/OFF/O Jandorf 61136 Double Circuit Toggle Switch Square D QO130C Miniature Standard Circuit Breaker
Screw terminal, momentary action. (ON)-OFF-(ON). Jandorf Toggle Switch, Double Circuit, Series: 61136, 125 V, 15 A, On/Off/On, Contact Configuration: DPDT, 2 Poles, 6-Screw Terminal, UL Listed Single-pole 3/4" circuit breaker provides overload and short circuit protection. Features a red Visi-Trip indicator to identify a tripped breaker. Accepts aluminum or copper conductors. Rated for 120/240Vac and at 10,000 Ampre Interrupting Rating (AIR). CSA approved to only install in Canadian Square D loadcentres.
Jandorf 61131 Double Circuit Toggle Switch Jandorf 61130 Double Circuit Toggle Switch Eaton CH115 Type CH Circuit Breaker
Jandorf Toggle Switch, Double Circuit Heavy Duty, Series: 61131, 125 V, 15 A, On/Off, Contact Configuration: DPST, 2 Poles, 4-Tab Terminal, UL Listed Jandorf Toggle Switch, Double Circuit Heavy Duty, Series: 61130, 125 V, 15 A, On/Off, Contact Configuration: DPDT, 2 Poles, 4-Screw Terminal, UL Listed Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole.
Eaton CH120 Type CH Circuit Breaker Eaton CH130 Type CH Miniature Circuit Breaker Eaton CH140 Type CH Circuit Breaker
Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole.
HomeLine HOMT2020CP Tandem Twin Circuit Breaker HomeLine HOMT1515CP Tandem Circuit Breaker Jandorf 61154 Single Circuit Toggle Switch
Tandem 1" single-pole circuit breaker. Offers 2 circuits in the space of 1. Features 10,000 AIR and 120/240 VAC. Thermal-magnetic tripping mechanism for overload and short-circuit protection of the electrical system. Accepts aluminum or copper conductors. CSA approved to only install in Canadian HomeLine loadcentres. Tandem 1" single-pole circuit breaker. Offers 2 circuits in the space of 1. Features 10,000 AIR and 120/240 VAC. Thermal-magnetic tripping mechanism for overload and short-circuit protection of the electrical system. Accepts aluminum or copper conductors. CSA approved to only install in Canadian HomeLine loadcentres. Jandorf Toggle Switch, Single Circuit, Series: 61154, 125 V, 10 A, Normally Off Momentary, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed
Feit 250R40/10 Incandescent Lamp Amertac SLC2BCB3-4 Light-Sensing Socket Reducer Socket Adapter Jandorf 61147 Single Circuit Toggle Switch
Standard brass base resists vibration and corrosion. 6-1/2" overall length. 250 watt, 120 volt. Candelabra light control. Turns incandescent candelabra based light bulbs on at dusk, off at dawn. Spring loaded contact allows for proper sensor orientation. Simulates home occupancy, ends coming home in the dark. 60 watts maximum. Plastic housing. 1.85" x 1.4" x 1.4". Jandorf Toggle Switch, Single Circuit, Series: 61147, 125 V, 20 A, Center Off/Normally Off Momentary, Contact Configuration: SPDT, 1 Poles, 3-Screw Terminal, UL Listed
AmerTac SLC6CBC-4 Programmable Light Control Socket Jandorf 61137 Toggle Switch Jandorf 61111 Single Circuit Toggle Switch
Outdoor/indoor programmable light control for incandescent/CFL/LED bulbs. Medium base light control screws into the fixture, bulb screws into control. Programmable off timer from 2, 5 or 8 hours, plus dusk to dawn settings. Random off timer deters intruders. Contact plunger allows sensor window to change direction. Digital microprocessor for full brightness and no flicker operation. 100 watts maximum. Plastic housing. Screw-in connection. 3.3" x 2.16" x 2.16". Jandorf Toggle Switch, Series: 61137, 125 V, 15 A, On/Off/On, Contact Configuration: DPDT, 2 Poles, 6-Tab Terminal, UL Listed Jandorf Toggle Switch, Single Circuit Heavy Duty, Series: 61111, 14 V, 21 A, On/Off, Contact Configuration: SPST, 1 Poles, 3-Tab Terminal, Nylon, UL Listed
Cutler Hammer CH115CS Miniature Standard Type CH Circuit Breaker Cutler Hammer CH130CS Miniature Standard Type CH Circuit Breaker Cutler Hammer CH120CS Miniature Standard Type CH Circuit Breaker
Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole. Quick make, quick break switch, inverse time element tripping operation and trip free handle. Thermal-magnetic trip curve. UL Listed, HACR rated, meets NEMA standards and Federal Specifications, CSA certified. 120/240 volt AC. 10,000 AIR. 3/4" per pole.
Feit 250R40/R/2 Dimmable Incandescent Lamp Jandorf 61134 Ball Single Circuit Toggle Switch Eaton BD2020 Type BD Twin Circuit Breaker
Standard brass base resists vibration and corrosion. 6-1/2" overall length. 250 watt, 120 volt. Jandorf Toggle Switch, Ball Single Circuit, Series: 61134, 125 V, 3 A, On/Off, Contact Configuration: SPST, 1 Poles, 2-Screw Terminal, UL Listed Switching duty rating, Duplex type breaker requires 1" per breaker. Thermal magnetic 40 degrees C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 volt. 10,000 AIR. 1" per breaker.
Eaton BD2030 Type BD Twin Circuit Breaker Eaton BD1515 Type BD Twin Circuit Breaker Boston Harbor V89WH01-4411H3L Bracket Base
Switching duty rating, Duplex type breaker requires 1" per breaker. Thermal magnetic 40 degrees C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 volt. 10,000 AIR. 1" per breaker. Switching duty rating, Duplex type breaker requires 1" per breaker. Thermal magnetic 40 degrees C breakers have rejection tab feature, allows only 42 circuits in the panel in compliance with NEC article 384-15. Interchangeable will replace: Bryant, Challenger and Westinghouse. Type BR. 120/240 volt. 10,000 AIR. 1" per breaker. White glass shade. 7-1/2" height x 4-1/2" width x 4-1//8" base extension. Uses white, medium base bulbs, 60 watt maximum, (not included). cULus Listed.
MES MP1515 Type MP-T Duplex NCL Tandem Circuit Breaker MES Q1515 Twin Miniature Circuit Breaker MES Q2020 Twin Miniature Circuit Breaker
Complete, unenclosed, molded case breaker with non-interchangeable trip. Takes the place of 2 single pole breakers in 1" of space. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (full size only), General Switch, I-T-E, Gould, Montgomery Ward and Sears. HACR and SWD rated. UL listed and CSA certified. 120 volt AC; 10,000 AIR. Complete, unenclosed, molded case breaker with non-interchangeable trip. Takes the place of 2 single pole breakers in 1" of space. Wire range: CU fron #14 to # 8, AI from #12 to #6. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (full size only), General Switch, I-T-E, Gould, Montgomery Ward and Sears. HACR rated. 120/240 volt AC; 10,000 AIR. Complete, unenclosed, molded case breaker with non-interchangeable trip. Takes the place of 2 single pole breakers in 1" of space. Wire range: CU fron #14 to # 8, AI from #12 to #6. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (full size only), General Switch, I-T-E, Gould, Montgomery Ward and Sears. HACR rated. 120/240 volt AC; 10,000 AIR.
MES MP2020 Type MP-T Duplex Tandem Circuit Breaker Jandorf 61170 Double Circuit Toggle Switch Boston Harbor V5BB03-3L Vanity Bar Fixture
Complete, unenclosed, molded case breaker with non-interchangeable trip. Takes the place of 2 single pole breakers in 1" of space. Will replace American Switch, Westinghouse Type BR, Bryant, Challenger, Sylvania, Crouse-Hinds, Murray, Frank Adams, General Electric (full size only), General Switch, I-T-E, Gould, Montgomery Ward and Sears. HACR and SWD rated. UL listed and CSA certified. 120 volt AC; 10,000 AIR. Jandorf Toggle Switch, Double Circuit, Series: 61170, 125 V, 8 A, On/Off, Contact Configuration: DPST, 2 Poles, UL Listed Vanity bath bar light, 18", uses medium base bulbs, 100 watt maximum (not included). cULus Listed.
Connecticut ICBQ Interchangeable Carded Type QP Circuit Breaker Connecticut ICBQ Interchangeable Carded Type QP Circuit Breaker Connecticut ICBQ Interchangeable Carded Type QP Circuit Breaker
Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. ITE/SIEMENS. 120 volt AC, 10,000 AIC. Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. ITE/SIEMENS. 120 volt AC, 10,000 AIC. Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. ITE/SIEMENS. 120 volt AC, 10,000 AIC.
Feit H39KC-175/DX High Intensity Discharge Mercury Vapor lamp Boston Harbor V5CH03 Vanity Bar Fixture Boston Harbor W22BB01-2349ECD3L On/Off Wall Bracket Switch
Light color similar to halogen but with more efficiency, consistency, and longer life. Deluxe white, diffused coated. H39KC ANSI ballast type. 24,000 average life hours. 7-1/2" overall length. Boxed. Vanity bath bar light, 18", uses medium base bulbs, 100 watt maximum (not included). cULus Listed. Frosted grape design glass shade. Uses one clear, medium base bulb, 60 watt maximum (not included). 4-1/2" diameter x 7-3/4" width x 4-7/8" base extension. cULus Listed.
LIGHTBAR BATH 3LT 18IN CHROME LIGHTBAR BATH 3LT 18IN VEN BRZ Osram Sylvania 69438 High Intensity Discharge Mercury Vapor Lamp
Vanity bath bar light. Uses 100W type G medium base bulb maximum, (not included). Vanity bath bar light. Uses 100W type G medium base bulb maximum, (not included). Coated bulb, universal operating position, 4000 K, 45  CRI. 3-4 minutes warm-up time, 24,000 average life hours.
Boston Harbor W39CH01LS-34473L Wall Bracket Guard Boston Harbor V88WH02-4413H-3L Bracket Guard Jandorf 61141 Toggle Switch
White/clear glass shade with pull chain. 5-1/4" diameter x 4-3/4" height x 7-1/8" base extension. Uses white, medium base bulbs, 60 watt maximum (not included). cULus Listed. White glass shade. 13" length x 4-3/4" width x 5-1/2" base extension. Uses two white, medium base bulbs, 75 watt maximum, (not included). cULus Listed. Jandorf Toggle Switch, Series: 61141, 125 V, 10 A, On/Off/On, Contact Configuration: TPDT, 3 Poles, 9-Screw Terminal, UL Listed
Howard HL0202-BATT Lead Acid Replacement Rechargeable Battery Eaton BR2020 Type BR Duplex Miniature Circuit Breaker Eaton BR1515 Type BR Duplex Miniature Circuit Breaker
Replacement battery for exit signs, 6 volt. Non-circuit limiting, less rejection tabs. 120 volt AC, 10,000 AIC. 1 space per pole. Non-circuit limiting, less rejection tabs. 120 volt AC, 10,000 AIC. 1 space per pole.
Eaton BR3030 Type BR Miniature Circuit Breaker Square D QOT1515CP Type QO Tandem Circuit Breaker Square D QOT2020CP Type QO Tandem Circuit Breaker
Non-circuit limiting, less rejection tabs. 120 volt AC, 10,000 AIC. 1 space per pole. Single-pole 3/4" circuit breaker offers 2 circuits in the space of 1 for overload and short-circuit protection of an electrical system. Use with QO load centers and CSED devices. ANSI certified and UL Listed. Single-pole 3/4" circuit breaker offers 2 circuits in the space of 1 for overload and short-circuit protection of an electrical system. Use with QO load centers and CSED devices. ANSI certified and UL Listed.
LIGHT BATH WALL 1LT AMBER/ORB LIGHT BATH 1LT ALABASTER/B-NIC Boston Harbor V5CH043L Vanity Bar Fixture
Uses 60W maximum type A19 bulb or 13W CFL bulb, (not included). 6-1/2" W x 9-1/2" H x 8-1/2" E. Uses 60W maximum type A19 bulb or 13W CFL bulb, (not included). 6-1/2" W x 9-1/2" H x 8-1/2" E. Vanity bath bar lights. 24", uses medium base bulbs, 100 watt maximum (not included). cULus Listed.
Boston Harbor RF-V-026-CH3L Vanity Fixture LIGHTBAR BATH 4LT 24IN CHROME Jandorf 61127 Toggle Switch
Frosted pleated glass shade. 5-1/2" length x 9" height x 7-5/8" depth. Uses clear medium base bulbs, 60 watt maximum. (not included). cULus Listed. Vanity bath bar light. Uses 100W type G medium base bulb maximum, (not included). Jandorf Toggle Switch, Series: 61127, 125 V, 15 A, On/Off/On, Contact Configuration: TPDT, 3 Poles, 9-Tab Terminal, UL Listed
LIGHTBAR BATH 4LT 24IN VEN BRZ LIGHTBAR BATH 4LT 24IN BRS NIC Boston Harbor F3-1W-3L Wall Sconce
Vanity bath bar light. Uses 100W type G medium base bulb maximum, (not included). Vanity bath bar light. Uses 100W type G medium base bulb maximum, (not included). Steel fixture, white glass shade, uses one medium base E26 bulb, 60 watt maximum, (not included). 9-3/4" height x 6" width. cULus Listed.
Boston Harbor RF-V-041-BN-3L Vanity Fixture FIXTURE WALL BRSHD NICKEL 1LT FIXTURE WL ORB ALBSTR GLS 1LT
Alabaster glass shade. 5" long x 8" high x 7-1/4" deep. Uses clear medium base bulbs, 60 watt maximum. (not included). cULus Listed. Interior wall fixture, brushed nickel finish with white opal glass. Uses medium-base light bulbs, 60 W maximum (not included). ETL/CETL listed. One-light interior wall fixture, oil rubbed bronze finish with aged alabaster glass. 9? x 5-1/8? extends 8? from wall. Uses 1 medium-base bulb, 60 W maximum (not included). ETL/CETL listed.
MES Q2020NC Non-CTL Twin Miniature Circuit Breaker Feit BPQ40/G9 Halogen Lamp Feit BPQ100/8.6 Halogen Lamp
Non-interchangeable trip. For retrofit use on I-T-E load centers built prior to 1965. 120/240 volt AC. 1" per duplex. Clear, compact and dimmable, 1-3/4" overall length. 2000 average life hours. 120 volt, carded. Compact and dimmable, 2000 average life hours. 120 volt, carded.
Feit BPQ35/8.6 Grounded  Halogen Lamp Feit BPQ60/G9 Halogen Lamp Feit BPQ25/G8 Halogen Lamp
Compact and dimmable, 2000 average life hours. 120 volt, carded. Clear, compact and dimmable, 1-3/4" overall length. 2000 average life hours. 120 volt, carded. Compact and dimmable, used for desk lamps and more. 2000 average life hours. 1-8/10" overall length. 120 volt, carded.
Feit BPQ25/G9 Halogen Lamp Feit BPQ100T4/JCD Dimmable Halogen Lamp Boston Harbor A2242-7-VB Wall Sconce
Clear, compact and dimmable, 1-3/4" overall length. 2000 average life hours. 120 volt, carded. Compact and dimmable, used for desk lamps and more. 2,000 average life hours. 120 volt. Uses one clear medium base bulb 60 watt maximum (not included). 4-7/8" width  x 9-3/8" height x 6-3/8" extension. cULus Listed.
Boston Harbor 1571-1W-3L Wall Sconce Cutler Hammer CHT2020CS Miniature Twin Type CHT Circuit Breaker Boston Harbor V5CH06 Vanity Bar Fixture
Steel fixture, frosted glass shade. Uses one medium base E26 bulb, 60 watt maximum, (not included). 9-1/2" height x 7" width. cULus Listed. Single-pole, twin (CTL) 3/4-inch (19.1 mm) per pole, requires one 3/4-inch (19.1 mm) space. Wire size range Cu/Al 60 degrees C or 75 degrees C number 14-8. Class CTL 10 kAIC. Rejection feature. Use only with loadcenters marked for use with CHT breakers. HACR and switching duty rated. Rated for 120/240V. Vanity bath bar light, 36", uses medium base bulbs. 100 watt maximum, (not included). cULus Listed.
Boston Harbor A2242-73L Wall Sconce FIXT WL ORB W/AMB-LIN GLS 1LT 55301101 LIGHT EXIT LED RCHRG
Uses one clear medium base bulb 60 watt maximum (not included). 4-7/8" width  x 9-3/8" height x 6-3/8" extension. cULus Listed. One-light indoor wall fixture, oil rubbed bronze finish with amber linen glass. Arts and crafts design. 8-9/16" x 5-1/8" extends 7-1/16" from wall, includes installation instructions and mounting hardware. Uses one 60-watt medium-base light bulb (not included). ETL/CETL listed. Comes complete with back up lights and remote control. 120/277VAC multi voltage operations. UL and CULus Listed. 0 to 40 degreesC indoor damp location listed. Maximum 24 hours for full recharge time. Built-in 1.2V 1000mAh Nickel cadmium battery for minimum 90 minutes emergency operation.
Howard HL0301 Slimline Exit Sign Connecticut UBIP120 Type UBIP Standard Circuit Breaker Connecticut UBIP130 Type UBIP Standard Circuit Breaker
Slimline, ultra compact, low profile. Charge rate/power on LED indicator light and push-to test switch for mandated code compliance testing. LVD (low voltage disconnect) prevents battery from deep discharge. Long life, maintenance free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to LED board for minimum 90 minute emergency illumination. Fully automatic, solid state, two rate charger initiates battery charging to recharge battery in 24 hours. Universal surface mount, wall or ceiling, with EZ-snap thermoplastic mounting canopy. Ultra-bright, energy efficient, long-lasting red LED. Injection-molded, engineering-grade, V-0 flame retardant, high-impact, thermoplastic. Curved face, rounded corner design. 11-5/8" long x 7-3/16" high. For ITE Pushmatic load centers. 1.5" space per breaker. SWD rated. 120 volt AC, 10,000 AIC. For ITE Pushmatic load centers. 1.5" space per breaker. SWD rated. 120 volt AC, 10,000 AIC.
Connecticut UBIP115 Type UBIP Standard Circuit Breaker FIXTURE WALL BN W/MESH SHD 1LT Connecticut ICBQ Interchangeable Carded Type QP Circuit Breaker
For ITE Pushmatic load centers. 1.5" space per breaker. SWD rated. 120 volt AC, 10,000 AIC. Indoor wall fixture, brushed nickel finish with mesh shades. Contemporary vintage-industrial look. Extends 8-1/4" from wall, back plate is 4-9/16" x 7-3/8". Uses 60-watt medium-base light bulbs (not included). ETL/CETL listed. Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. Twin pole, 1" space per breaker.
Connecticut ICBQ Interchangeable Carded Type QP Circuit Breaker LIGHT BATH 2LT ALABASTER/B-NIC LIGHT EMERGENCY LED
LIGHT EMERGENCY LED
Our Price: $34.04
Interchangeable group will fit most General Electric, General Switch, ITE, Murray, American Switch, Westinghouse Type BR and Bryant. Twin pole, 1" space per breaker. Uses 60W maximum type A19 bulbs or 13W CFL bulbs, (not included). 16-1/2" W x 9-1/2" H x 7-5/8" E. Test switch and charge indicator. Installs in minutes with wall mount applications using Universal J-box mounts. Dual positionable heads focus light. Injection-molded thermoplastic ABS housing has a UL 94V-0 flame rating. Maximum 24 hours for full recharge time. UL and CULus Listed. 0-degree to 40-degree C indoor damp location listed. Built-in 3.6V1000mAh Nickel cadmium battery for minimum 90 minutes emergency operation. 120V/277VAC, 300 lumen.
LIGHT BATH WALL 2LT AMBER/ORB FIXTURE WALL BNKL/OPAL GLS 2LT Howard HL0202 Adjustable Optics Emergency Light
Uses 60W maximum type A19 bulbs or 13W CFL bulbs, (not included). 16-1/2" W x 9-1/2" H x 7-5/8" E. Interior wall fixture, brushed nickel finish with white opal glass. Uses medium-base light bulbs, 60 W maximum (not included). ETL/CETL listed. Fully adjustable, offers quick installation and provides premium options in an economical package. Injection-molded, high-impact, UV-stabilized thermoplastic construction. Universal mounting plate with quick-connect feature. Snap-together construction. Fully-adjustable glare-free lighting heads. Dual-voltage 120/277 VAC operation. Long-life, maintenance-free, rechargeable NiCd battery. Supplied with 1.8W LED lamps. Damp location listed.
Osram Sylvania 52552 Tungsten Halogen Lamp Osram Sylvania 52553 Decorative Tungsten Halogen Lamp Osram Sylvania 52560 Tungsten Halogen Lamp
Rated life hours - 2000, 2850K, 100 CRI. Rated life hours - 2000, 2850K, 100 CRI. Rated life hours - 2000, 2850K, 100 CRI.
Connecticut UBIF Standard Thin Type NC Circuit Breaker Connecticut UBIF Standard Thin Type NC Circuit Breaker Connecticut UBIF Standard Thin Type NC Circuit Breaker
For Federal Pacific Load Centers. SWD/HACR Rated. 120/240 volt AC, 10,000 AIC. For Federal Pacific Load Centers. SWD/HACR Rated. 120/240 volt AC, 10,000 AIC. For Federal Pacific Load Centers. SWD/HACR Rated. 120/240 volt AC, 10,000 AIC.
Connecticut UBIF Standard Thick Type NA Circuit Breaker Connecticut UBIF Standard Thick Type NA Circuit Breaker Connecticut UBIF Standard Thick Type NA Circuit Breaker
Replacement for Federal Pacific Load Centers. Single pole SWD rated, double pole is HACR rated. 120/240 volt AC, 10,000 AIC. Replacement for Federal Pacific Load Centers. Single pole SWD rated, double pole is HACR rated. 120/240 volt AC, 10,000 AIC. Replacement for Federal Pacific Load Centers. Single pole SWD rated, double pole is HACR rated. 120/240 volt AC, 10,000 AIC.
Howard HL0223 Fixed Optics Emergency Light EMERG LIGHT DUAL HEAD NICAD   Connecticut UBIZ50 Type UBIZ Thick Circuit Breaker
Compact, low-profile design with adjustable optics. Universal mounting plate with quick-connect feature. Snap-together construction speeds installation. Injection-molded, engineering-grade, 5VA flame retardant, high-impact resistant thermoplastic with high performance, chrome plated metalized reflector and plastic lens for optimal light distribution. Long-life, ultra bright white LED lamp heads, 1 watt (8 LEDs x 0.125 watt) per head. Dual-voltage 120/277 VAC operation. 3.6 volt, maintenance-free, rechargeable NiCd battery. Internal solid-state transfer switch automatically connects the internal battery to lamp heads for minimum 90-minute emergency illumination. Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours. UL Listed for damp locations. LED emergency light with 3.6 volt nickel cadmium battery back-up and AccuLED optics. Dual voltage input 120/277 VAC, 60Hz - 240 VAC capable with 48 hour recharge time. Brownout circuit, Low voltage disconnect, overload / short circuit protection. Injection molded, color stable, high impact polycarbonate. White textured finish. EZ hang feature for fast installation. Suitable for ceiling or wall mount applications. Universal J-box mounting pattern, keyhole mounting slots. UL924 Listed, damp location. Life Safety NFPA 101, NEC/OSHA. Replacement for Zinsco Q series. Requires one 3/4" space. HACR-(heating and air conditioning) rated. Tested and certified in accordance with the National Electric Code and conforms to the ANSI/UL Standard 489, 9th Edition. 120 volt AC - 10,000 AIC. Carded.
Howard HL0201 Exit Sign Connecticut UBITBA115L Type UBITBA Left Clip Circuit Breaker Connecticut UBITBA120R Type UBITBA Right Clip Circuit Breaker
Slim profile, long life, energy saving LED lamp. Snap-fit canopy for top or end mounting, faceplate installs without tools. Dual voltage 120/277 VAC operation. Requires 1/2 of one 1" space. 120 volt 10,000 AIC. HACR rated. "L" suffix means breaker attaches to the left hand side of the bus bar only. "R" suffix means breaker attaches to the right hand side of the bus bar only. Breakers should be bought in pairs to fill the 1" space. Requires 1/2 of one 1" space. 120 volt 10,000 AIC. HACR rated. "L" suffix means breaker attaches to the left hand side of the bus bar only. "R" suffix means breaker attaches to the right hand side of the bus bar only. Breakers should be bought in pairs to fill the 1" space.
FIXTURE WL LED ORB W/FRSTD GLS Connecticut UBIZ20 Type UBIZ Thick Circuit Breaker Connecticut UBIZ Standard Thick Circuit Breaker
One-light LED contemporary outdoor wall fixture, oil rubbed bronze finish on steel with frosted glass lens. Includes an integrated 8-1/2 watt LED. 7-1/16" x 5", extends 5-1/8" from wall. 3-9/16" height from center of outlet box. Back plate is 5". ETL/CETL listed. Replacement for Zinsco Q series. Requires one 3/4" space. HACR-(heating and air conditioning) rated. Tested and certified in accordance with the National Electric Code and conforms to the ANSI/UL Standard 489, 9th Edition. 120 volt AC - 10,000 AIC. Carded. Replacement for Zinsco Q series. Requires one 3/4" space. HACR-(heating and air conditioning) rated. Tested and certified in accordance with the National Electric Code and conforms to the ANSI/UL Standard 489, 9th Edition. 120 volt AC - 10,000 AIC. Carded.
Connecticut UBIZ15 Type UBIZ Thick Circuit Breaker FIXTURE WALL BRSHD NICKEL 3LT Boston Harbor F3-2W Wall Sconce
Replacement for Zinsco Q series. Requires one 3/4" space. HACR-(heating and air conditioning) rated. Tested and certified in accordance with the National Electric Code and conforms to the ANSI/UL Standard 489, 9th Edition. 120 volt AC - 10,000 AIC. Carded. Interior wall fixture, brushed nickel finish with white opal glass. Uses medium-base light bulbs, 60 W maximum (not included). ETL/CETL listed. Steel fixture, white glass shades. Uses two medium base E26 bulbs, 60 watt maximum, (not included). 9-3/4" height x 13" width.
FXT SCONCE LED FLSHMT DIM ABLK FXT SCONCE LED FLSHMT DIM ABLK Boston Harbor RF-V-028-CH Vanity Fixture
Vintage outdoor factory sconce fixture. Hardwired, matte black, 6" metal. Includes 1 each A19 glass LED bulb. Clear filament LED. 6.5W, 800 lumens, 2700K, Dimming, 15000 average life hours. Vintage outdoor factory sconce fixture. Hardwired, matte black, 6" metal. Includes 1 each A19 glass LED bulb. Clear filament LED. 6.5W, 800 lumens, 2700K, Dimming, 15000 average life hours. Frosted pleated glass shade. 24" long x 8-1/2" high x 7-1/4" deep. Uses 3 clear medium base bulbs, 60 watt maximum. (not included). cULus Listed.
Arrow Hart 452-BOX Toggle Switch Boston Harbor V83NK02-VB Vanity Bar Fixture Gro-Lux 221657 Fluorescent Lamp
Meets all UL 20 requirements. Shank is threaded 15-32"-32 x 9/32" long. Keyed shank, indicator plate, and finishing nut furnished. Wire leads are 6" long #18, stripped 3/4". Metal On/Off bat handle. Temperature rating: -40 to 65 degrees C. Use clear medium base bulb, 60 watt maximum (not included). 13-3/4" width x 9-3/8" height x 7-1/2" length. Generates radiant energy, which is beneficial for plants and enhances growth of many plants for home and commercial use. Also used for aquariums.
LIGHT BATH WALL 3LT AMBER/ORB LIGHT BATH 3LT ALABASTER/B-NIC Sure-Lites LPX Emergency Exit Light
Uses 60W maximum type A19 bulb or 13W CFL bulb, (not included). 24-1/8" W x 9-1/2" H x 8-1/4" E. Uses 60W maximum type A19 bulb or 13W CFL bulb, (not included). 24-1/8" W x 9-1/2" H x 8-1/4" E. Thermoplastic housing. 120 or 277 volt AC. 1.5 volt battery backup, LED light uses only 2 watts of energy. Red lettering. Universal exit light mounts on ceiling, wall or can be flush mounted. Snap in canopy/function box cover for easy and secure installation.
Feit 125R40/1 Infrared Incandescent Lamp Boston Harbor V83NK02 Vanity Bar Fixture Connecticut UBIP2020 Type UBIP Tandem Twin Circuit Breaker
Medium base bulb. 6-1/2" overall length, 5" diameter. 125 watt, 120 volt. Use clear medium base bulb, 60 watt maximum (not included). 13-3/4" width x 9-3/8" height x 7-1/2" length. For Pushmatic load centers. SWD Rated. 120 volt AC, 10,000 AIC. 1.5" space per breaker.
Connecticut UBIP1515 Type UBIP Tandem Thin Circuit Breaker SIGN EXIT EMERGENCY 25FT      Gro-Lux 24671 Fluorescent Lamp
SIGN EXIT EMERGENCY 25FT
Our Price: $54.37
For Pushmatic load centers. SWD Rated. 120 volt AC, 10,000 AIC. 1.5" space per breaker. Emergency coverage of 25 feet to 60 feet. Long life LED source with adjustable optics. Sealed Nickel Cadmium battery. EZ hang and EZ key features for installation. Multi-voltage input 120/240/277 VAC. Injection-molded, color-stable, high-impact thermoplastic housing. Self-diagnostics perform NFPA required monthly testing. Runs for a minimum of 90 minutes during a power outage. Designed for indoor commercial or industrial use. Generates radiant energy, which is beneficial for plants and enhances growth of many plants for home and commercial use. Also used for aquariums.
Boston Harbor RF-V-044-BN Vanity Fixture Square D QO1515CP Type QO Tandem Circuit Breaker