Home > HAND TOOLS > MECHANICS TOOLS > PLIERS & CUTTERS & WRENCHES > SNIPS - TINNERS
Sort By:
1
SNIPS STRAIGHT PATTERN 7IN    PLIER END CUTTING NIPPERS 7IN Mintcraft Pro JL-NP040  Mini End Cutting Pliers
Drop forged AISI-6150 chrome vanadium serrated edged blades are induction hardened. Meets or exceeds Federal Specifications ANSI/ASME B107.16.1985. Matt grips. Drop forged high carbon steel; fully polished finish resists rust and corrosion; hardened and tempered sharp cutting edges; non-slip vinyl comfort grips; hardness meets or exceeds ANSI standards. Drop forged chrome nickel steel for durability; fully polished finish resists rust and corrosion; hardened and tempered sharp cutting edges; ergonomic anti-slip cushioned grips for comfort and less hand fatigue; hardness meets or exceeds ANSI standards.
SNIPS STRAIGHT PATTERN 10IN   SNIPS STRAIGHT PATTERN 12IN   Irwin 22007 Tinners Snip 7 in L Double Dipped
Drop forged AISI-6150 chrome vanadium serrated edged blades are induction hardened. Meets or exceeds Federal Specifications ANSI/ASME B107.16.1985. Matt grips. Drop forged AISI-6150 chrome vanadium serrated edged blades are induction hardened. Meets or exceeds Federal Specifications ANSI/ASME B107.16.1985. Matt grips. Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting.
Vise-Grip 2078318 End Cutting Plier Irwin 23007 Tinners Snip 7 in L Wiss A13N/A13 Tinners Snip
Made of durable nickel chromium steel with induction hardened cutting edge that stays sharper, longer. ProTouch grips provide extra comfort and reduces hand fatigue. Meets or exceeds ANSI specifications. Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel. Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort.
MaxSteel 14-569 Tinners Snip DeWalt DWHT70286 Tinners Snip Irwin 22010 Tinners Snip 10 in L Double Dipped
Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability. Heavy-duty forged steel cuts up to 22 gauge cold rolled steel and 26 gauge stainless steel; double dipped slip resistant grip; meets or exceeds ANSI specifications in cutting performance and durability. Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting.
DeWalt DWHT70287 Tinners Snip Irwin 23010 Tinners Snip 10 in L MaxSteel 14-556 Tinners Snip
Heavy-duty forged steel cuts up to 22 gauge cold rolled steel and 26 gauge stainless steel; double dipped slip resistant grip; meets or exceeds ANSI specifications in cutting performance and durability. Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel. Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability.
FatMax 89-875 Solid Joint End Cutting Plier Wiss A11N/A11 Tinners Snip Wiss V10N/V10 Tinners Snip
Made of drop forged from high carbon, alloy steel for long life and durability; high leverage for heavy use. Provides up to 45 percent less cutting effort with up to a 33 percent longer cutting edge. Bi-material grips provide a comfortable and secure grip. Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort. Blades of quality steel, hot drop-forged for sharp edge long life, individually hand edged and rust resistant. Cuts moderately tight curves left, right or straight in light stock. Cuts low carbon cold rolled steel. Cushion grip.
Wiss A12N/A12 Tinners Snip Diamond GG010HN Solid Joint End Cutting Nipper Irwin 22012 Tinners Snip 12-3/4 in L
Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort. Made of drop forged from high quality diamond steel. Handles and jaws are heat treated, tempered for toughness. Sharp cutting edges are hardened and honed with good leverage; will cut large size nails and wires. Black finish, polished head. Hot drop-forged steel blades with precision ground edges provide strength, long life and a a tight grip. Durable spring washer holds blades tightly against each other when cutting. Flat blades for straight and wide curves. Cuts cold rolled steel and stainless steel. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting.
Irwin 23012 Tinners Snip 12-3/4 in L Double Dipped Channellock 357 End Cutting Plier Malco M12NRB Replacement Snip Blade
Hot drop-forged steel blades with precision ground edges provide strength, long life and a tight grip.  Durable spring washer holds blades tightly against each other when cutting. Duckbill blades for straight and tight curves. Handles are encased in Plastisol and Pro-Touch grips provide superior comfort, resists twisting. Cuts cold rolled steel and  stainless steel. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edge that is laser heat treated for longer lasting cutting edges. Channellock Blue grips for comfort. Made in USA. Replacement blades and rivets; pressure fit inset blades make field replacement easy.
MaxSteel 14-558 Tinners Snip Malco MC12NRB Replacement Snip Blade Crescent 727CVN/727CV Solid Joint End Cutting Nipper
Made of forged alloy (chrome-molybdenum) with chrome plated hardware. Serrated cutting edges prevent slippage when cutting. Slip-resistant grip. Exceeds ANSI standards for cutting performance and durability. Replacement blades and rivets; pressure fit inset blades make field replacement easy. Made of forged alloy tool steel that have electronically induction hardened angled cutting edges and blade sizes. Edge type is standard; cut capacity is 12 AWG. Red cushion grip handles have a leverage ratio to blades for easier cutting. Conform to U. S. Federal Specifications GGG-N-350A, Type 1 Class 2, Style A.
Wiss A9N/A9 Tinners Snip Channellock 358 End Cutting Plier Wiss V19N/V19 Tinners Snip
Blades of quality steel hot drop-forged for sharp edge, long life, rust resistant, and individually hand edged. Cuts straight and wide curves (when trimming light gauge stock); flat face guides tool along straight line. Cuts low carbon cold rolled steel. Cushion grip for comfort. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edge that is laser heat treated for longer lasting cutting edges. Channellock Blue grips for comfort. Made in USA. Blades of quality steel, hot drop-forged for sharp edge long life, individually hand edged and rust resistant. Cuts moderately tight curves left, right or straight in light stock. Cuts low carbon cold rolled steel. Cushion grip.
Wiss W12L Lightweight Snip Channellock 148-10 End Cutting Plier ULTRA LIGHTWEIGHT SNIPS
ULTRA LIGHTWEIGHT SNIPS
Our Price: $32.55
3" cut length; sleek head design reduces cutting effort by allowing easy flow of material while cutting; slim nose, ideal for making cuts in tight places and reaching tight corners; large, wide handle loops increase cutting leverage and comfortably fit all hand sizes, including gloved hands; strong and durable lightweight aluminum construction. Made of high carbon steel for superior performance on the job and electronic coating for rust prevention. Uses a knife and anvil style cutting edges hardened for durability. Used on large nails. Channellock Blue grips for comfort. Made in USA. Makes clean, easy straight cuts and left or right circles and squares in vinyl as well as other pliable, non-ferrous materials; compact and maneuverable; full-size handles loops; big 3-inch (76 mm) carbon steel blades that are easily replaceable.
Crescent 728CVN/728CV Solid Joint End Cutting Nipper Andy M14N Hand Snip 14 in L Andy MC12N Combination Hand Snip 12 in L
Made of forged alloy tool steel that have electronically induction hardened angled cutting edges and blade sizes. Edge type is standard; cut capacity is 12 AWG. Red cushion grip handles have a leverage ratio to blades for easier cutting. Conform to U. S. Federal Specifications GGG-N-350A, Type 1 Class 2, Style A. Cast aluminum frame, reinforcing handle ribs, specially ground blades, allows cut material to flow unobstructed, away from the user's hand. Rounded contours fit the hand comfortably, cuts Vinyl, Aluminum, Copper, Stainless Steel (26 Gauge) Galvanized Steel (24 Gauge),  cuts in tight material, shapes such as J-Channel. Replaceable blades. Metallic gray finish. Cast aluminum frame, reinforcing handle ribs, specially ground blades, allows cut material to flow unobstructed, away from the user's hand. Rounded contours fit the hand comfortably, cuts Vinyl, Aluminum, Copper, Stainless Steel (26 Gauge) Galvanized Steel (24 Gauge),  cuts in tight material, shapes such as J-Channel. Replaceable blades. Metallic gray finish.
Wiss W13LO Offset Lightweight Snip 13 in L Large/Wide Loops Wiss W14L Lightweight Snip Andy M12N/M12 Combination Snip
3" cut length; cuts straight and left curves; offset head design allows for easy flow of materials while cutting; strong and durable, lightweight aluminum construction; large, wide handle loops increase leverage and comfortably fit all hand sizes and gloved hands. 3" cut length; sleek head design reduces cutting effort by allowing easy flow of material while cutting; slim nose, ideal for making cuts in tight places and reaching tight corners; large, wide handle loops increase cutting leverage and comfortably fit all hand sizes, including gloved hands; strong and durable lightweight aluminum construction. Cast aluminum frame, reinforcing handle ribs, specially ground blades, allows cut material to flow unobstructed, away from the user's hand. Rounded contours fit the hand comfortably, cuts Vinyl, Aluminum, Copper, Stainless Steel (26 Gauge) Galvanized Steel (24 Gauge),  cuts in tight material, shapes such as J-Channel. Replaceable blades. Metallic gray finish.
Andy MC14N Combination Hand Snip 14 in L Crescent 729CVN/729CV Solid Joint End Cutting Nipper Andy MC12NG Combination Hand Snip 12 in L
Cast aluminum frame, reinforcing handle ribs, specially ground blades, allows cut material to flow unobstructed, away from the user's hand. Rounded contours fit the hand comfortably, cuts Vinyl, Aluminum, Copper, Stainless Steel (26 Gauge) Galvanized Steel (24 Gauge),  cuts in tight material, shapes such as J-Channel. Replaceable blades. Metallic gray finish. Made of forged alloy tool steel that have electronically induction hardened angled cutting edges and blade sizes. Edge type is standard; cut capacity is 12 AWG. Red cushion grip handles have a leverage ratio to blades for easier cutting. Conform to U. S. Federal Specifications GGG-N-350A, Type 1 Class 2, Style A. Easy change pressure fit inset blades for straight shearing, mild curve cuts, and multiple layers of material; cuts sheet metal and vinyl siding; full 3" cut, slim nose with extended blade tips reaches into corners. Comfort grip for fit and control in cold, wet or heat. Use replacement blade MC12NRB.
PLIERS END CUTTNG MAX LVRG 8IN
PowerSlot technology provides 2X more power and half the cutting effort; induction-hardened cutting edges cut ACSR, nails, screws and even piano wire; three-zone comfort grips are contoured for optimal cushion and control; integrated handle hooks equipped for Performance Lanyard system for safer elevated working conditions and easier retrieval when stored; specially coated for superior rust-resistance and longer life tool. Made in Germany.
   
 
1