Home > ELECTRICAL > LIGHTING & CEILING FANS > FLUORESCENT FIXTURES & PARTS > FLUORESCENT CIRCLINE FIXTURES
Sort By:
1
BULB LED A19 40W EQUIV NON-DIM BULB LED A19 60W EQUIV NON-DIM BULB LED A19 60W EQUIV NON-DIM
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 60W 800 LUM 5000K Coleman 95504 Low Voltage Light Bulb Coleman 95503 Low Voltage Light Bulb
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Clear replacement bulb. Clear replacement bulb.
SPRING CLIP GREY 3IN          BULB LED A19 10YR 41K 1PK 60W BULB LED A19 FRSTED 8.5W 2700K
SPRING CLIP GREY 3IN
Our Price: $2.38
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. LED light bulb, non-dimmable indoor/outdoor.
LOCK PIG TAIL                 BULB LED A19 75W EQUIV NON-DIM Coleman 95529 Low Voltage Light Bulb
LOCK PIG TAIL
Our Price: $2.80
For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Clear replacement bulb.
PIN COUPLING W/COLLAR 1IN     Coleman 95527 Low Voltage Light Bulb BULB LED A19 DIM 5.5W 2700K
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety. Clear replacement bulb. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
BULB LED A19 DIM 5.5W 5000K   Coleman 95518 Low Voltage Halogen Lamp Coleman 95517 Low Voltage Halogen Lamp
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Landscape lighting clear replacement bulb. Landscape lighting T3 clear replacement bulb.
Coleman 95507 Low Voltage Halogen Lamp Coleman 95508 Low Voltage Halogen Lamp 5 WATT 2700K A19 DIM MED BASE
Landscape lighting clear replacement bulb. Landscape lighting clear replacement bulb. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
LED6A19DIM 6/40W 27K 470L FRST Feit BPQ40A15/CL/2 Dimmable Halogen Lamp Feit BPQ40A15N/CL/2 Dimmable Halogen Lamp
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. For ceiling and appliance use. Instant on to full brightness. Clear, A15 bulb shape. 120 volt, 1500 average life hours, 3000K. 3.5"H x 1.875"D. UL/CUL Listed, FCC Compliant, 100 percent mercury free. For ceiling and appliance use. Instant on to full brightness. Clear, A15 bulb shape. 120 volt, 1500 average life hours, 3000K. 3.5"H x 1.875"D. UL/CUL Listed, FCC Compliant, 100 percent mercury free.
8.5 WATT 27K A19 DIM MED BASE BULB LED A19 DIM 9W 5000K     BULB LED 10YR 40W A19 27K 2PK
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 40W A19 5K 2PK  BULB LED 10YR 60W A19 27K 2PK BULB LED 10YR 60W A19 5K 2PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
LED10A19DIMO930UB 3K800L FRSTD LED10A19DIM 10/60W 27K 800L   BULB LED A19 40W EQUIV NON-DIM
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
BULB LED A19 40W EQUIV NON-DIM LOCK ARM SCAFFOLD 13IN        BULB LED A19 75W EQUIV NON-DIM
LOCK ARM SCAFFOLD 13IN
Our Price: $5.24
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 75W EQUIV NON-DIM Homax 9320 Tile/Grout Sealer BULB LED A19 60W EQUIV NON-DIM
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Seals and protects grout lines. Resists mildew, dirt penetration and discoloration. Can be used with colored grout. Easy applicator bottle to apply directly to grout lines. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 60W EQUIV NON-DIM BULB LED A19 8.5/60W EQ NON-DM BULB LED A19 100W EQUIV 3000K
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free.
BULB LED A19 DIM 4.5W 2700K   BULB LED A15 DIM 4.5W 2700K   Coleman 95499 Low Voltage Halogen Lamp
Indoor and outdoor use. 15,000 hours average life. Indoor and outdoor use. 15,000 hours average life. Landscape lighting T3 clear replacement bulb.
Coleman 11604 Low Voltage Connector BULB LED A19 10YR 27K 1PK 75W BULB LED A19 10YR 5K 1PK 75W
For connection of  low voltage cable for landscape lights. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 DIM 4.5W 2200K   Miracle GRT-PEN-WHT Grout Pen Miracle GRT-PEN-BUFF Grout Pen
Indoor and outdoor use. 15,000 hours average life. Use to cover up stubborn stain grout. Dries rapidly and leave a clean uniform grout line without harsh chemicals. Odorless. Reversible nib. Non-Toxic. Covers 175 linear feet of average grout lines. Use to cover up stubborn stain grout. Dries rapidly and leave a clean uniform grout line without harsh chemicals. Odorless. Reversible nib. Non-Toxic. Covers 175 linear feet of average grout lines.
BULB LED A19 DIMMBLE 12W 2700K A15 4.8W/40W MED DIM LED 3000K A19 10.5W/60W MED DIM LED3000K
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
LED12A19DIMO930UB 3K1100L FRST LED12A19DIM 12/75W 2700K 1100L LED12A19DIM 12/75W 5000K 1100L
Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
6.5W 2200K A19 VIN DIM MED AMB BULB LED DIMM A19 G2 90CRI 1CD Homax 9310 Pourable Tile/Grout Coating
Indoor and outdoor use. 15,000 hours average life. High-CRI, dimmable, 9.8 watts, 120 volts, 2700K, medium base LED is a direct replacement for 60 watt incandescent and meets the latest requirements of the California Energy Commission. CRI of 90 and average life of 25,000 hours. UL Listed, RoHS and FCC Compliant and mercury free. Energy Star Approved. 4.5"H x 2.3"D. Turn stained grout new again. Renews up to 75 sq. ft. of grouted tile area with easy to use applicator. White.
A19 10W COLD START LED 3000K  LED A15 827 2.5W/25W DIM 2700K BULB LED A15 VINTAGE 4.5W/40W
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent bulbs. Instant on to full brightness.25000 hours average life. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Indoor and outdoor use. 15,000 hours average life.
BULB LED A19 100W EQUIV NONDIM BULB LED A19 100W EQUIV NONDIM CustomBlend CBTSG50 Standard Thin?Set?Mortar
General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. General purpose, instant on to full brightness, energy saving, non-dimmable. RoHS Compliant and mercury free. Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
BULB LED ST19 DIM 4.5W 2700K  Y-ADAPTER ACCESSORY           LED 4.5W A15 2700K DIM MED BS
Y-ADAPTER ACCESSORY
Our Price: $7.92
Indoor and outdoor use. 15,000 hours average life. Y-Adaptor accessory allows 2 low voltage heads to be connected at 1 quick connect location. Dimmable A15 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base.
LED 4.5W A15 2700K DIM CAND BS BULB LED A15C VINTAGE 4.5W/40W Homax 9324 Tile/Grout Sealer
Dimmable 4.5 watt, 120 volt, A15 candelabra base LED. 80CRI, 450 lumen, 2700K, 15000 hours average life. Indoor and outdoor use. 15,000 hours average life. Seals and protects grout lines. Resists mildew, dirt penetration and discoloration. Can be used with colored grout. Penetrating formula for interior or exterior grout.
BULB LED A19 FRST 27K 1PK 100W BULB LED A19 FROST 5K 1PK 100W BULB LED 10YR 40W A19 27K 4PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED 10YR 6/40W A19 5K    BULB LED 10YR 60W A19 27K 4PK BULB LED 10YR 60W A19 5K 4PK
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 10YR 35K 4PK 60W BULB LED A15 40W EQUIV NON-DIM LED A1540C 5W/40W CAND 3000K
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D.
A15 5W/40W 850 CAND LED 5000K 6.5W 22K ST19 VIN DIM MED CLRD Coleman 97172 Low Voltage Replacement Spot Light
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Indoor and outdoor use. 15,000 hours average life. With adjustable direction. Can be mounted to deck or in ground. Durable plastic construction with plastic lens. Uses number 95503 4 watt wedge base bulb, included.
Coleman 97171 Low Voltage Replacement Tier Light LED A15 827 4.5W/40W DIM 2700K LED A15 E26 850 4.5W/40W 5000K
Add on to existing low voltage lighting fixtures for illuminating paths, walkways, driveways, or for general lighting needs. Traditional tier light design. Impact resistant polymer construction. Includes surface mount bracket for deck mounting and 4 watt T3 bulb. 9" fixture height. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
EXTENSION CORD ACCESSORY 10FT A15 827 4.5W/40W CAND LED2700K A15 E17 4.5W 827 DIM LED 2700K
Extension cord accessory for system lead. 10 Ft. Increases the gap between the transformer and the low voltage heads. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free.
A15 CAND 850 4.5W/40W LED5000K BULB A19 2700K 3-LVL DIM LED  A15 E26 827 4.5W/40W LED 2700K
For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
CustomBlend CBTSW50 Standard Thin?Set?Mortar BULB A19 2700K/4000K/5000K CCT LED  5.5W A15 2700K DIM MED
Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Dimmable A15 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base.
LED 5.5W A15 2700K DIM MED BS Qualcraft 2501 Roofing Brackets Qualcraft 2502 Roofing Brackets
Dimmable A15 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
LED 4.5W A19 2700K DIM MED PK4 LED 6.9W A19 2700K DIM MED PK4 LED 4.5W A19 5000K DIM MED PK4
Ultra LED, frosted. Medium E26 base. 2700K. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Ultra LED, frosted. Medium E26 base. 2700K. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Dimmable A19 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base.
LED 6.9W A19 5000K DIM MED PK4 A1560C 850 6.5W CAND LED 5000K LED A15 6.5W/60W MED 3000K
Dimmable A19 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
LED A15 6.5W/60W CAND 3000K   LED A15 827 6W/60W DIM 2700K  LED A15 MED E26 850 DIM 5000K
Candelabra (E12) base A15 bulb. Instant on to full brightness. Indoor, suitable for damp locations. 120 volt non-dimmable. Average life of 11,000 hours. UL/CUL Listed, FCC and RoHS Compliant and mercury free. 3.25"H x 1.75"D. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant. Medium screw base, E26. For indoor use. Replacement for traditional incandescent bulbs in uses such as ceiling fans. 120 volts. Instant on to full brightness. RoHS Compliant.
BULB A19 2700K LED MIC-MOT    A15 827 6W/60W CAND LED 2700K A15 E12 CAND 6W DIM LED 5000K
For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant.
Miracle GRT-SLR-AERO-12/0 511 Spray-On Grout Sealer BULB LED ST19 DIM 6.5W 2700K  LED A19 MED 3.6W/40W FRO 2700K
For the protection of granite, marble, travertine, slate and grout. Penetrates into the surface and forms an invisible barrier that is resistant to moisture and stains, while allowing vapor to escape. Resists water and stains. USDA approved. UV transparent. Covers up to 250 linear feet per can. Indoor and outdoor use. 15,000 hours average life. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
LED A19 3.6W/40W MED 2700K CLR Qualcraft 2500 Roofing Brackets Versabond MTSG25 Fortified Thin-Set Mortar
General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Aqua?Mix AMGCRQT Polished?Granite?Cleaner?And?Resealer Aqua?Mix AMMCRQT Cleaner and Resealer Coleman Cable 95732 Moonrays Landscape Low Volt Lights
Formulated to clean and maintain the natural beauty of stone. Contains an Aqua Mix sealer in its formulation to reseal as it cleans. Non-acidic formula. Formulated to clean and maintain the natural beauty of your stone. Use on marble, travertine, limestone and slate. Contains Aqua Mix sealer in its formula to reseal as it cleans. Non-acidic. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included.
LED A19 MED 850 7W FROST 5000K LED A19 MED 7W/60W CLEAR 2700K A19 MED 850 7W CLEAR LED 5000K
Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant. Medium E26 base. Omni directional full range dimmable LED. Instant on to full brightness. Suitable for damp locations. Mercury free, no ultraviolet. Energy Star Approved. FCC and RoHS Compliant, UL Listed.
Custom Building TLPS24Z Tile Lab Tile/Grout Sealer GUARDRAIL 5FT                 Qualcraft 2504 Roofing Brackets
GUARDRAIL 5FT
Our Price: $12.10
Penetrating sealer that resists most common oil and water based stains as well as dirt and grease. Protects grout, Satillo, porcelain and quarry tile, terra-cotta, masonry, brick, concrete, and natural stone. Will not leave a difficult, hard to remove residue. Low odor, water-based, neutral pH formula. On polished or dense surfaces. 1 quart covers 200-300 sq. feet while 1 gallon covers 800 to 1200 sq. ft. On porous surfaces 1 quart covers 50-100 sq. ft. while 1 gallon covers 200-400 sq. ft. 2-3 hour drying time. Can be recoated in 24 hours. Meets ANSI, CSA and OSHA standards. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
Qualcraft 2505 Roofing Brackets Qualcraft 2503 Roofing Brackets Coleman Cable 95734 Moonrays Landscape Low Volt Lights
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified. Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included.
A15 E17 6W 827 DIM LED 2700K  A15 E12 CAND 6W DIM LED 2700K TileLab TLAGSRA15Z Grout?Sealer
Intermediate (E17) base. Performance A15 LED replaces incandescent. Average life of 15,000 hours. Used for decorative or accent applications. Instant on to full brightness. Suitable for damp locations. 3.2"H x 1.85"D. UL/CUL Listed, FCC, RoHS Compliant and mercury free. For lanterns and ceiling fans. Instant on to full brightness. Suitable for damp locations. Full range dimming. 120 volt, 180 degree beam. UL/CUL Listed, FCC Compliant. Penetrating sealer that resists most common oil and water-based stains. Can be used to apply sealer to sanded or non-sanded grout while in a standing position with 360 nozzle. Protects sanded and non-sanded grout joints from grease, coffee, wine, cooking oil, bath oils, colored juices, ketchup, mustard and every-day dust and dirt to keep grout bright and new. Covers 525 linear feet per 15 oz can.
LED A21 DIM MED FRST 2700K 23W LED A21 DIM MED FRST 5000K 23W A19 9.5W/60W MED E26 LED 3000K
Dimmable LED, A21, medium base, 23 watts/120 volts, 80CRI, 2600 lumen, 15000 hours average life. Frosted. Instant on to full brightness. Dimmable LED, A21, medium base, 23 watts/120 volts, 80CRI, 2600 lumen, 15000 hours average life. Frosted. Instant on to full brightness. General purpose, medium screw base. For indoor use. Replacement for traditional incandescent A19 bulbs. UL Listed, FCC and RoHS Compliant.
GUARDRAIL 7FT                 SPOT LIGHT QUICK-CONNECT 100L LED 17W A21 260 LUMENS
GUARDRAIL 7FT
Our Price: $13.28
LED 17W A21 260 LUMENS
Our Price: $13.58
Meets ANSI, CSA and OSHA standards. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord
LED 8.5W A19 3000K 800LUM MED Versabond MTSG50 Fortified Thin-Set Mortar BULB BATTERY BKUP LED A21 27K
Rough service, medium screw base. 3000K, 8.5 watts, 120 volts, 80 CRI. For indoor use. Replacement for 60 watt traditional incandescent bulbs. Instant on to full brightness. 11000 hours average life. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
Coleman Cable 95728 Moonrays Landscape Low Volt Lights Henry 425 Tileflex Thin-Set Mortar Mintcraft Pro YH-CS001 Casters
Adjustable direction. Diecast aluminum with glass lens. Uses number 95499, 20 watt bi-pin Halogen bulb, included. Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel. For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity.
SPOT LIGHT QUICK-CONNECT 200L BULB LED A19 10YR 27K 4PK 75W BULB LED A19 10YR 5K 4PK 75W
Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
WW Henry 13080 Tileflex Plus Thin Set Mortar Versabond MTSW50 Fortified Thin-Set Mortar Henry 527 Tileflex Plus Flexible Thin-Set Mortar
Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
PATHWAY LT MUSHRM QK-CONN 35L SpeedSet SDS25 Fortified Thin?Set?Mortar LED 8.5W A19 2700K MED PK12
Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Polymer-modified mortar for time-critical installations such as restaurants, malls and hotel lobbies. Excellent for cold temperature installations. Grout in 2 hours, traffic in 6. Protected by MoldGard Technology  to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive. LED A19 medium base bulb.
LED 8.5W A19 5000K MED PK12   Coleman Cable 95836 Moonrays Landscape Low Volt Lights Coleman 95878 Low Voltage 3-Tier Holton Path Light
LED A19 medium base bulb. Diecast aluminum with clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses a 10 watt Halogen bulb, included. Stamped aluminum with nickel finish and ribbed plastic lens. Uses 11 watt number 95527 clear wedge base bulb, included. 9" above ground height.
LED 9W A19BULB 2700K MED FROST Miracle 511-PT-12/1 511 Impregnator Penetrating Sealer LED 9W A21 2700K MED FROST PK4
LED A19 medium base bulb. Designed for the protection of natural stone, tile, grout and masonry surfaces. Forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. Not a surface coating and will not alter the natural look. Treated surfaces are harder and less slippery. Ok for food areas. UV transparent. Covers approximately 1,000-4,000 sq ft per gallon. A21 medium base bulb, dimmable, 2700K.
LED 9W A21 5000K DIM MED PK4  Coleman Cable 95804 Moonrays - Galena Landscape Low Volt Lights LED 9W A21 2700K DIM MED FRST
Dimmable A21 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Diecast aluminum fixture with rubbed bronze finish and frosted plastic lens Mix-N-Match with other low voltage lights for a custom landscape design. 16.5" above ground height. Uses 11 watt number 95527 wedge base bulb, included. A21 medium base bulb, dimmable, 2700K.
LED 9W A21 5000K MEDIUM BS DIM Henry 425 Tileflex Thin-Set Mortar Henry 527 Tileflex Plus Flexible Thin-Set Mortar
Dimmable A21 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
PATHWAY LT BOLLARD QK-CONN 35L LED A21 24W/150W MED DIM 5000K LED A21 24W/150W MED DIM 3000K
Bollard Quick-Connect Pathway Light.  Plastic housing. 35 Lumens. 0.5 Watts.18/2 SPT-2W, 8 Ft. Cord. Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free. Omni directional LED. 25,000 life hours. Medium E26 base. Instant on to full brightness, indoor, suitable for damp locations. Energy Star Approved, RoHS Compliant and mercury free.
Coleman 95828 Low Voltage Rock Spotlight VersaBond?Flex VBFG50 All Purpose Fortified Thin?Set?Mortar Coleman 09501 Low Voltage Electrical Cable
Decorative rock blends in with landscaping. Made from durable polysresin with glass lens. Uses 20 watt MR-16 number 95518 bulb, included. 5" tall above ground height. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. For use with outdoor low voltage lighting systems operating at 30 volts or less. Put light fixtures where you want or expand a set. UL Listed. Made in the USA.
PATHWAY LT MUSHRM QK-CONN 35L BULB LED AT19 21K CLR AMB ORIG BULB LED A19 FRST 27K 4PK 100W
Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed.
BULB LED A19 FROST 5K 4PK 100W BULB LED A19 FRST 35K 4PK 100W Henry 348 Tileflex CeMastic Tile Setting Adhesive
Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Contractor series LED A19 Lamp. 120 volts, 11,000 hours average life. 80 CRI. UV and IR free, mercury and lead free. No warm-up time, instant-on with full light output and stable color. For indoor environments. Not intended for use with dimmers. RoHS compliant, cETLus Listed. Use for setting all types of tile. Use over any surface such as floors, walls and countertops. Dries fast. Strength of a thin set mortar, ease of use of a mastic. Water resistant. Yields over one gallon of adhesive. Covers 60 sq. ft. per 7.5 lb. box when applied with a 5/32"D x 3/16"W V-notched trowel for setting floor and wall tile up to 8" x 8". Over 8" x 8" with a 1/4" x 1/4" x 1/4" square notched trowel covers 25 sq. ft. per 7.5 lb. box.
LED 4.5W A15 2700K DIM MED CLR EXPANSION CORD 30FT           Henry 316 Marbleflex Fast Setting Thin-Set Adhesive
EXPANSION CORD 30FT
Our Price: $23.16
Dimmable A15 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base. Expansion cord. 30 Ft. Includes (3) light connectors & (3) weatherproof caps. Sets all types of natural stone, marble and ceramic tile. Use for interior floors and walls. Fast drying. Grout in 2 hours. Bonds non-moisture and moisture sensitive marble, granite, and stone tile, mosaics, pavers, and regular ceramic tile to concrete, concrete backer units, masonry, cement terrazzo, drywall and other common building surfaces on interior floors, walls and countertops. Wood, laminate, and ceramic surfaces must be prepared with henry waterproofing membrane or Henry floor primer prior to installation. For setting floor and wall tile up to 12" x 12" with 1/4" x 1/4" x 1/4" square notched trowel covers 19-22 sq. ft. per 12.5 Lb. box. For setting floor and wall tile over 12" x 12" with 1/4" x 3/8" x 1/4" square notched trowel covers 16-19 sq. ft. per 12.5 Lb. box.
BULB LED ST19 21K CLR ORIG    BULB LED AT19 5K CLR SMK ORIG BULB LED ST19 21K CLR AMB ORIG
BULB LED 7W A60 CWHT          JACK ADJ LEVELLING GALV 24IN  Coleman 09503 Low Voltage Electrical Cable
Luemx LED Bulb, 7 W, 120 VAC, E26/E27, 940000 hr Average Life, Cool White, CRI >80, 3500 K Color, 130 deg Beam, 60 mm Dia, 115 mm Length, 50 - 60 Hz With plate (hollow). Meets ANSI, CSA and OSHA. For use with outdoor low voltage lighting systems operating at 30 volts or less. Put light fixtures where you want or expand a set. UL Listed. Made in the USA.
TileLab TLMTSSHG Matte?Sealer?And?Finish Henry 527 Tileflex Plus Flexible Thin-Set Mortar LED 8.5W A19 4100K 800LUM MED
For saltillo, terra-cotta, quarry tile, slate and flagstone. Seals the surface to resists stains, dirt and grease. Beautifies and enhances color while providing scuff, mar and scratch resistance. Low odor. Will not yellow with age. Covers 75-125 sq ft. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs. LED A19 medium base bulb.
TileLab TLGLSSHG Gloss?Sealer?And?Finish Coleman Cable 95725 Moonrays Landscape Low Volt Lights TRANSFORMER D2D W/TIMER 24W
For saltillo, terra-cotta, quarry tile, slate and flagstone. Seals the surface to resist stain, dirt and grease. Beautifies and enhances color. Provides scuff, mar and scratch resistance. Low odor. Will not yellow with age. Use in dry areas only. Covers 75-125 sq. ft. PAGODA style diecast aluminum fixture with black finish and clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses replacement 11 watt number 95527 wedge base bulb, included. 24- Watt Transformer with Dusk to Dawn Timer.
LED 11W A21 2700K DIM MED PK4 LED 11W A21 5000K DIM MED PK4 LED 11W A21 5000K DIM MEDIUM
A21 medium base bulb, dimmable, 2700K. Dimmable A21 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Dimmable A21 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base.
LED 11W A21 2700K DIM MED BS  VersaBond?Flex VBFW50 All Purpose Fortified Thin?Set?Mortar BULB LED ST19 5K CLR SMK ORIG
A21 medium base bulb, dimmable, 2700K. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
GUARDRAIL POST W/WEDGE CLAMP  Custom Building MGMM50 Medium Bed Mortar TileLab SurfaceGard Sealer
Meets ANSI, CSA and OSHA standards. For small to large format natural stone, ceramic or porcelain tile 15" x 15" or larger, clay pavers or other thin or medium bed applications. Non-slumping formula that eliminates lippage and minimizes leveling requirements. Can be applied for horizontal applications as thick as 3/4" or for thin bed applications to 1/4". Covers 35-100 sq ft. per 50 lb bag. Coverage depends upon trowel size. Exceeds ANSI A118.1, A118.4, and A118.11. Use as a sealer or grout release. Provides protection for marble, stone, porcelain, quarry and saltillo tile, grout, concrete and masonry. Repels dirt, oil and stains allowing easy clean up. Resists mold and mildew growth. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Allows moisture vapor transmission. Coverage on polished or dense surfaces 100-150 sq. ft. per pint, 200-300 sq. ft. per quart, 800-1200 sq. ft. per gallon. Coverage on porous surfaces 25-50 sq. ft. per pint, 50-100 sq. ft. per quart, 200-400 sq. ft. per gallon.
BRACE SCAFFOLD CROSS 7X4FTX1IN TRAY BAKER TOOL               BULB LED NON-DIM A19 800L 3K
TRAY BAKER TOOL
Our Price: $28.93
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. Meets ANSI, OSHA and CSA standard. For use with I-CISC and I-CISCPY scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in. Non-dimmable A19 medium base LED. Omni directional instant on to full brightness with relatively cool running performance. Average life of 11,000 hours. UL/CUL Listed. FCC and RoHS Compliant. 100 percent mercury free.
Miracle 511-QT-6/1 511 Impregnator Penetrating Sealer BULB LED 8W A19 CWHT 300K     TileLab TLSES24Z Stone?Sealer?And?Enhancer
Designed for the protection of natural stone, tile, grout and masonry surfaces. Forms an invisible barrier that is resistant to moisture and stains while allowing vapor to escape. Not a surface coating and will not alter the natural look. Treated surfaces are harder and less slippery. Ok for food areas. UV transparent. Covers approximately 1,000-4,000 sq ft per gallon. Luemx LED Bulb, Series: LGP, 4 W, 85 - 265 VAC, A19 Bulb, Medium Screw (E26), 550 lumens, Cool White, CRI >70, 300 K Color, 120 deg Beam, 60 mm Dia, 123 mm Height, UL Listed, Plastic and Aluminum Color enhancer and penetrating sealer for all types of porous natural stone and grout. Rejuvenates the color and appearance of worn, faded stone, tumbled-marble and other rustic-look stones. Can also be used to darken the color of grout. Provides long-lasting protection against oil, grease and stains. Low odor. Complies with all federal and SCAQMD standards for VOCs. Covers 30-190 sq ft per 24 oz. Coverage depends on surface type.
QualCraft 2201 Pump Jack Brace FlexBond FB50 Crack?Prevention?Mortar BULB LED A19 ULTRA 35K 4PK 75W
Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions. Premium quality, polymer-modified mortar with outstanding flexibility and bond strength. FlexBond is exceptional for tiling over difficult-to-bond surfaces and for setting impervious porcelain or glass tile. Isolates cracks up to 1/16? and withstands minor substrate deflection. Protected by MoldGard Technology to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive. Ultra LED, frosted. Medium E26 base. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Energy Star.
Coleman 095021008 Low Voltage Electrical Cable LED 4.5W A19 2700K DIM MED    LED 6.9W A19 27K DIM MED FROST
For use with outdoor low voltage lighting systems operating at 30 volts or less. Put light fixtures where you want or expand a set. UL Listed. Made in the USA. Ultra LED, frosted. Medium E26 base. 2700K. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color. Ultra LED, frosted. Medium E26 base. 2700K. Suitable for damp locations. Dimmable down to 10 percent. No warm-up time, instant-on with full light output and stable color.
LED 4.5W A19 5000K DIM MEDIUM LED 6.9W A19 5000K MEDIUM DIM LED 4.5W A19 2700K DIM MED CLR
Dimmable A19 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Dimmable A19 LED bulb, 5000K, 82CRI, 15000 hours average life, E26 medium base. Dimmable A19 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base.
LED 6.5W A19 2700K DIM MED CLR Homax 0432 Grout Sealer BULB LED NON-DIM A19 800L 12V
Dimmable A19 LED bulb, 2700K, 80CRI, 15000 hours average life, E26 medium base. Use on all cement, latex and sanded grout, unglazed quarry tile, brick and masonry. Achieve an invisible water-repellent seal and minimize the effects of soap, dirt, grease, grime, alcohol, mildew and food stains.
BRACKET SIDE 20IN             SPOT LT LANDSCAPE LED KT 25FT Coleman 095041008 Low Voltage Electrical Cable
BRACKET SIDE 20IN
Our Price: $39.04
Meets ANSI, CSA and OSHA standards. Landscape Spotlight Kit. LED. Dusk Til Dawn, 25 Ft. Plastic housing. 3-Spotlights. Dusk to Dawn Transformer, 12 Watt . Two (2) End Caps. Link Up to 8 Spotlights. 100 Lumens (Per Spotlight). 1.5 Watts (Per Spotlight). 25 - Ft. Cord. For use with outdoor low voltage lighting systems operating at 30 volts or less. Put light fixtures where you want or expand a set. UL Listed. Made in the USA.
SimpleSet CTTSG1-2 Pre?Mixed Thin?Set?Mortar Qualcraft 2525 Roofing Brackets Qualcraft 2210 Pump Jack Pole Anchor
Bonds ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile. Features six-position locking adjustments. Constructed of heavy duty galvanized steel. Has a capacity of one worker per 8' or staging. Can be repositioned and taken down without damaging shingles. 3-position replaceable tongue. Provides additional margin of safety and security when used according to instructions with light duty scaffolding system.