Home > ELECTRICAL > LIGHTING & CEILING FANS > FLUORESCENT FIXTURES & PARTS > FLUORESCENT FIXTURES-DECOR
Sort By:
1
Polyblend WDG1-6 Dry Non-Sanded Polymer Modified Tile Grout Cooper BP45FS2 All Purpose Fluorescent Starter Cooper BP45-FS4 All Purpose Fluorescent Starter
For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs.
Red? Devil 425 Pre-Mixed Tile Grout? Savogran 12841 Tile Grout? House & Home Restore 438 Pre-Mixed Tile Grout?
Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application. Waterproof cement that mixes with water to a smooth paste for grouting ceramic/mosaic tiles. Recommended for new installations or repairing and replacing bathroom, shower stall and kitchen wall, floor, ceiling and counter tiles. Not a tub caulk. For repairing loose, cracked or damaged grout in ceramic and mosaic tile. Mildew and water resistant after full cure. Equipped with winder to enable evacuation of more caulk from squeeze tube.
Savogran 12860 Ready-To-Use Tile Grout White Dry WDG5-4  Non-Shrinking Non?Sanded Tile Grout? Coleman 97172 Low Voltage Replacement Spot Light
A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk. For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. With adjustable direction. Can be mounted to deck or in ground. Durable plastic construction with plastic lens. Uses number 95503 4 watt wedge base bulb, included.
Coleman 97171 Low Voltage Replacement Tier Light Red? Devil 428 Pre-Mixed Tile Grout? Savogran 12861 Pre-Mixed Ready-To-Use Tile Grout?
Add on to existing low voltage lighting fixtures for illuminating paths, walkways, driveways, or for general lighting needs. Traditional tier light design. Impact resistant polymer construction. Includes surface mount bracket for deck mounting and 4 watt T3 bulb. 9" fixture height. Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application. A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk.
Western FP00320034 Pre-Mixed Grout? and Thin-Set Red? Devil 424 Pre-Mixed Tile Grout? White Dry WDG25  Non-Shrinking Non?Sanded Tile Grout?
Formulated for the installation of quarry, ceramic and mastic tile on walls. Can be used to install or repair tile in showers, in bathrooms, and on backsplashes. Ready-to-use. Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application. For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG3707-4 Sanded Tile Grout? Polyblend PBG527-4 Sanded Tile Grout? Polyblend PBG3867-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG507-4 Sanded Tile Grout? Polyblend PBG1457-4 Sanded Tile Grout? Polyblend PBG3817-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG3807-4 Sanded Tile Grout? Polyblend PBG1657-4 Sanded Tile Grout? Polyblend PBG607-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG117-4 Sanded Tile Grout? Polyblend PBG107-4 Sanded Tile Grout? Polyblend PBG097-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1567-4 Sanded Tile Grout? Polyblend PBG1807-4 Sanded Tile Grout? Polyblend PBG457-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1227-4 Sanded Tile Grout? Polyblend PBG227-4 Sanded Tile Grout? Polyblend PBG3827-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG197-4 Sanded Tile Grout? Coleman Cable 95732 Moonrays Landscape Low Volt Lights Coleman Cable 95734 Moonrays Landscape Low Volt Lights
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included. Diecast aluminum. Mounts easily to wooden surface. Uses bulb #95504, 7 watt wedge base bulb, included.
GROUT PREMIXED BRIGHT WHT 1QT GROUT PREMIXED LINEN 1QT      GROUT PREMIX DELOREAN GRAY 1QT
Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls.
Feit FS5/10 Fluorescent Starter with Condenser Feit FS2/10 Fluorescent Starter with Condenser Feit FS4/10 Fluorescent Starter with Condenser
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser. Long life fluorescent starter with condenser.
Feit FS22/10 Fluorescent Starter with Condenser SPOT LIGHT QUICK-CONNECT 100L Savogran 12862 Pre-Mixed Ready-To-Use Tile Grout?
Long life fluorescent starter with condenser. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk.
Savogran 12842 Tile Grout? Coleman Cable 95728 Moonrays Landscape Low Volt Lights Polyblend PBG0925 Sanded Tile Grout?
Waterproof cement that mixes with water to a smooth paste for grouting ceramic/mosaic tiles. Recommended for new installations or repairing and replacing bathroom, shower stall and kitchen wall, floor, ceiling and counter tiles. Not a tub caulk. Adjustable direction. Diecast aluminum with glass lens. Uses number 95499, 20 watt bi-pin Halogen bulb, included. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG38025 Sanded Tile Grout? Polyblend PBG38625 Sanded Tile Grout? Polyblend PBG12225 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1025 Sanded Tile Grout? Polyblend PBG1125 Sanded Tile Grout? Polyblend PBG6025 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG16525 Sanded Tile Grout? Polyblend PBG5225 Sanded Tile Grout? Polyblend PBG38225 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG5025 Sanded Tile Grout? Polyblend PBG38125 Sanded Tile Grout? Polyblend PBG18025 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG14525 Sanded Tile Grout? Polyblend PBG1925 Sanded Tile Grout? Polyblend PBG1110 Non?Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
Polyblend PBG0910 Non?Sanded Tile Grout? Polyblend PBG5210 Non?Sanded Tile Grout? Polyblend PBG38010 Non?Sanded Tile Grout?
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
Polyblend PBG16510 Non?Sanded Tile Grout? Polyblend PBG1010 Non?Sanded Tile Grout? Polyblend PBG2225 Sanded Tile Grout?
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG4525 Sanded Tile Grout? SPOT LIGHT QUICK-CONNECT 200L Coleman Cable 95836 Moonrays Landscape Low Volt Lights
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Quick-Connect Pathway Spotlight. LED. 18/2 SPT-2W, 8 Ft. Cord Diecast aluminum with clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses a 10 watt Halogen bulb, included.
Coleman 95878 Low Voltage 3-Tier Holton Path Light PATHWAY LT MUSHRM QK-CONN 35L Coleman Cable 95804 Moonrays - Galena Landscape Low Volt Lights
Stamped aluminum with nickel finish and ribbed plastic lens. Uses 11 watt number 95527 clear wedge base bulb, included. 9" above ground height. Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Diecast aluminum fixture with rubbed bronze finish and frosted plastic lens Mix-N-Match with other low voltage lights for a custom landscape design. 16.5" above ground height. Uses 11 watt number 95527 wedge base bulb, included.
MTL BRKT FOR 8FT STRP LT RTOFT Acuity 148TKH Strip Light Coleman 95828 Low Voltage Rock Spotlight
Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Decorative rock blends in with landscaping. Made from durable polysresin with glass lens. Uses 20 watt MR-16 number 95518 bulb, included. 5" tall above ground height.
PATHWAY LT BOLLARD QK-CONN 35L PATHWAY LT MUSHRM QK-CONN 35L Acuity 204RUF Strip Light
Bollard Quick-Connect Pathway Light.  Plastic housing. 35 Lumens. 0.5 Watts.18/2 SPT-2W, 8 Ft. Cord. Quick-Connect Pathway Light..LED. 35 Lumens, 0.5 Watts. 18/2 SPT-2W, 8 ft cord Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations.
Coleman Cable 95725 Moonrays Landscape Low Volt Lights WRAP FLUORESCENT T8 2-BULB 17W STRIPLT 1LT LOWPROF T8 120V2FT
PAGODA style diecast aluminum fixture with black finish and clear glass lens. Mix-N-Match with other low voltage lights for a custom landscape design. Uses replacement 11 watt number 95527 wedge base bulb, included. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed.
Acuity 3348/127N4C Economy Low Profile Fluorescent Ceiling Wrap Acuity 204RUH Strip Light STRIPLIGHT LOW PROF 1LT T8 4FT
Wraparound fixture with acrylic prism diffuser. 48",  32 watt, residential use. Uses two F32T8 lamps, not included. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed.
Acuity 204RUG Strip Light Acuity 208GJ1 Strip Light FLUORESCENT STRIP LIGHT 4FT T8
Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Provides general illumination. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps. cULus listed for damp locations. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed.
LIGHT STRIP 2FT LINK LED 10W  FIXTURE LIGHT 2LMP WHT 32W 4FT SPOT LT LANDSCAPE LED KT 25FT
Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Landscape Spotlight Kit. LED. Dusk Til Dawn, 25 Ft. Plastic housing. 3-Spotlights. Dusk to Dawn Transformer, 12 Watt . Two (2) End Caps. Link Up to 8 Spotlights. 100 Lumens (Per Spotlight). 1.5 Watts (Per Spotlight). 25 - Ft. Cord.
STRIPLIGHT 1LT LOW PROF T8 2FT Coleman Cable 95534 Moonrays Landscape Low Volt Lights FIXTURE CIRC FLUSH 22/32W WHT
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Adds safety and security. Patented "Twist-n-Lock" connectors. Frosted white plastic lens. Photocell technology automatically turns lights on at dusk and off at dawn. Includes 10 plastic tier lights, 50' of low voltage cable, 48 watt photocell operated transformer, and 4 watt T3 bulbs. Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations.
STRIPLIGHT 2LT GEN PURP T8 4FT Acuity 645625 Fluorescent Strip Light Fixture FIXTURE TROFFER 2LT U31W 2X2FT
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Flush, stem or row mounting. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint. Commercial universal voltage, 120-277V, 50/60 Hz AC high power factor electronic ballast. Use with T8 fluorescent linear lamps, not included. 48" length x 4-3/4" width x 3-1/4" depth. cULus listed for damp locations. High performance static T8 fixture for recessed applications. Suitable for damp locations. Uses 2 bulbs, 31 watts, 24". UL Listed.
Acuity 211H2M High Output Strip Light STRIP LIGHT 2FT LED 20W 4000K LIGHT STRIP 4FT LINK LED 20W
Rugged steel chassis with baked white enamel finishing. Flush, stem or row mounting. Can be hung individually or in continuous runs. 20 degree Fahrenheit starting temperature. 4-1/4" width x 3" depth. Lamps not included. Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations.
PATHWAY LT MSHRM LED KIT 30FT Acuity 256441 Tandem Fluorescent Strip GROUT PREMIXED BRIGHT WHT 1GAL
Mushroom Pathway Light Kit. LED. Light reaches up to a 30ft. in distance. (3) Pathway lights. 12-Watt Dusk to Dawn Transformer. (2) End Caps link up to 24 Pathway lights. 35 Lumens (per spotlight).0.5 Watts (per spotlight). 18/2 spt-2w, 30 Ft. Cord Two 48" fixtures in tandem using two medium bi-pin bulbs each. Flush, stem or row mounting, rugged steel chassis with baked white enamel finish. Uses four 32 watt T-8 lamps, not included. UL Listed for damp locations. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls.
GROUT PREMIXED LINEN 1GAL     GROUT PREMIX DELOREAN GRAY 1GA Acuity 256439 Narrow Wrap Fluorescent Fixture
Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Low profile, narrow wrap light fixture, 2 light, 32 watt. White steel housing and clear prismatic diffuser with white metal ends. Diffuser hinges from either side for easy mounting. Uses 2 each F32  T8 lamps (not included). Energy star qualified, meets new energy legislation requirements. 48-1/4" x 7-9/16" x 3".
Louisville AP8000 Stepstool SPOT LT LANDSCAPE LED KIT 25FT Howard FSR84432ASEMV000I Fluorescent Retro Fit Kit
Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth. Landscape spotlight kit with timer. LED. Dusk to dawn, 25 ft. Metal housing. 3 Spotlights. 24-Watt Dusk to Dawn Transformer with Time on Options. 2 End caps, Link up to 8 Spotlights. 200 Lumens (per spotlight). 3-Watts (per spotlight) Fluorescent strip channel retrofit kit to upgrade an existing 8? strip fixture into a newer and more efficient electronic T8 strip. Uses two (2) 4? gear trays that install independently for easy installation. Lampholder cutouts guarantee correct spacing and that lampholder will not fall out during install. Code gauge steel. High gloss, baked enamel finish. NEC compliant luminaire power disconnect standard. Contents: 2 gear trays with fully wired high efficiency instant start T8 ballast and lampholders, 12 tek screws, 4 gear tray tethers. Electronic ballast, inherent thermal protection, class P. 8' length, 4.25" width, uses 4 lamps, not included. 120-277 input volts. UL Listed.
Acuity 199YWJ Fluorescent Strip Light Fixture FIXTURE TROFFER 4LIGHT 2FTX4FT Acuity 111AFH Strip Light
White double striplite. Uses two 59 watt bulbs, not included. UL Listed. For use with T8 lamps, electronic ballasts and sockets. Smooth hemmed sides and inward formed end flanges for safe handling. Lighter weight fixture. Standard steel door frame with precision flush mitered corners, allows easy lens replacement without frame disassembly (for lenses up to .156" thick). Powder-painted, steel latches. Mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material UV stabilized. No asbestos is used in this product. Suitable for damp locations. UL Listed. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Heavy-duty channel is die-formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Housing is finished in lighting grade white baked gloss enamel paint. No diffuser, fluorescent lamp is exposed. For use with 59 watt, 96" T8 slimline linear lamps. The fixture is cULus listed for damp locations.
UniFlex Pro 13097 Polymer Modified Sanded Grout? Unipro 13096 Polymer Modified Sanded Grout? Unipro 13089 Polymer Modified Sanded Grout?
Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant. Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant. Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant.
RETROFIT LED KIT WITH TUBES   STRIP LIGHT 4FT LED 40W 4000K PATHWAY LT MUSHRM LED KIT 30FT
Replacement for an older T12 or T8 8 foot strip light. Kit contains 4-4 foot LED tubes, 8 non shunted sockets and 1 metal retrofit kit. Integral driver bypasses the ballast. 15 watts per LED tube - (60 watts total). 120-277 volt, 1800 lumens per LED tube - (7200 lumens total), 5000K. Instant start down to -4 degreesF. 50,000 hours rated life. DLC and cUL certified. Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Mushroom Pathway Light Kit. LED. Light reaches up to a 30ft. in distance. (3) Pathway lights. 12-Watt Dusk to Dawn Transformer. (2) End Caps link up to 24 Pathway lights. 35 Lumens (per spotlight).0.5 Watts (per spotlight). 18/2 spt-2w, 30 Ft. Cord
FIXTURE WRP4LT 32W 4FT OAK END Werner 260 Platform Ladder Acuity 987213 Wrap Around Fluorescent Fixture
Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Economical low profile with a narrow wrap. Clear prismatic diffuser. Diffuser hinges from either side for easy mounting. Stem, continuous or individual mounting. 48-1/4" x 13" x 3".
FIXTURE 4L 32W SQ BSKTWRAP 4FT PATH/SPOT LIGHT KIT D2D 50FT  Werner 260 Platform Ladder
Uses 4-32 watt lamps, 120-277 volt. For surface or stem mounting, individual or row installation. Linear side prisms control brightness, pyramidal bottom prisms minimize lamp image. Diffuser hinges open from either side for easy maintenance. Full depth, white enamel end plates. Die-formed from code-gauge cold-rolled steel. Channel cover snaps into place without the use of tools. Diffuser is extruded clear acrylic. Five-stage iron-phosphate pretreatment. Finished with high-gloss, baked white enamel. Thermally protected, suitable for damp locations. AWM, TFN or THHN wire used throughout. UL and C-UL Listed. Pathway-Spotlight Kit. Light reaches up to a 50ft. in distance. (4) Pathway light. (2) Spotlights.12-Watt Dusk to Dawn Transformer.  Link up to 2 complete kits35 Lumens (per pathway light). 100 Lumens (per spotlight). 0.5 watts (per pathway light). 1.5 watts (per spotlight). 18/2 SPT-2W, 50 ft cord. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide.
PATH/SPOT LT KT D2D W/TMR 50FT FIXTURE FLUO OVAL CIRC 2-32WT9 LITEPUFF FLUSHMNT 2LT 32W1X4FT
Pathway-Spotlight Kit with Timer. LED. (4) Pathway lights. (2) Spotlights. 24-Watt Dusk to Dawn Transformer with Time on Options. (2) End Caps link up 3 complete kits. 35 Lumens(per pathway light). 200 Lumens (per spotlight). 0.5-Watts (per pathway light). 3-Watts (per spotlight). 18/2 SPT-2W, 50 ft cord. Residential and light commercial applications. White glass diffuser for a widespread uniform illumination. Center finial provides easy access for cleaning and maintenance. Includes (1) 55W 2C T6 2700K fluorescent lamp. Standard with 120V residential electronic ballast, 60HZ. No flickering and quiet operation without interfering with other home electronics. CUL listed to US and Canadian safety standards and suitable for damp locations. Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed.
LIGHT STRIP 8FT T8 HIGH OUTPUT Xtend+Climb Home Telescoping Ladder LITEPUFF FLUSH 4LT 32W 1.5X4FT
For unit or row installations, surface or suspended mounting. Thermally protected, resetting. Heavy-duty channel, die-formed from code-gauge steel. Channel cover secured by captive quarter-turn latch. Five-stage iron phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. UL listed to US and Canadian safety standards. Damp location listed, listed for 25 degree C ambient temperature. Stands at 8.5 ft and retracts down to 27 inches. Features patented True Telescoping Technology. Aerospace engineered using airplane grade alumium alloy for strength. Double overmolded feet for durability and traction. Angled thumb release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean touch anodized finish. Dimensions: Height Extended: 8.5', Height Closed: 27", 18" W x 3.75" D. 16.5 pounds. Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed.
STEPLADDER MULTI-TASK ALU 17FT Xtend+Climb 760P Telescoping Extension Ladder Louisville L-2095 Ladder
23 possible configurations. Step ladder, extension ladder and twin a frames all in one compact design. Flared beam for added stability. Built from strong aircraft aluminum. Wide base for added stability. Special features: 3 ft h scaffold, 4-7 ft h frame, 9-15 ft extension, 4 ft h workbench. 24? base width. 17 ft H x 24 in W x 8 in D. 1in rung size. Stands at 10.5 ft and retracts down to 29 inches. Gives you the ability to those hard to reach corners of the house. Features patented True Telescoping Technology. Aerospace engineered using airplane grade alumium alloy for strength. Double overmolded feet for durability and traction. Angled thumb release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean touch anodized finish. Dimensions: Height Closed: 29", 19" W x 4" D. Weighs 20 pounds. Use as a straight/extension ladder (L-2098-17: 9 to 15; L-2098-22: 11' to 19'), twin stepladder or  stairway ladder (L-2098-17: 4' to 7'; L-2098-22: 5' to 9') and plank support (L-2098-17: 1' to 4'; L-2098-22:1' to 5'). Includes heavy duty locking pins and quick activating snap-lock hinge. Provides stability and versatility for the most demanding projects.
Werner MT-17 Telescoping Multi-Ladder Core Distribution 770P Xtend+Climb Aluminum Telescoping Ladders Louisville L-2095 Ladder
Smooth curved rails, double riveted steps, extra wide flared bottom with slip resistant feet. Converts to twin stepladder, stairway stepladder, extension ladder and 2-scaffold bases. Stair and step height 4' to 7', scaffold length 1' to 3', rails  2-5/8" wide, steps 1" wide, and flange 1" wide. Designed with homeowners and do-it-yourselfers in mind. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 32?H x 20?W x 5?D. 16.5 ft. stands at height. 27lbs. Use as a straight/extension ladder (L-2098-17: 9 to 15; L-2098-22: 11' to 19'), twin stepladder or  stairway ladder (L-2098-17: 4' to 7'; L-2098-22: 5' to 9') and plank support (L-2098-17: 1' to 4'; L-2098-22:1' to 5'). Includes heavy duty locking pins and quick activating snap-lock hinge. Provides stability and versatility for the most demanding projects.
Werner MT-22 Telescoping Multi-Ladder Core Distribution 780P Xtend+Climb Aluminum Telescoping Ladders Xtend+Climb Professional Telescoping Ladder
Smooth curved rails, double riveted steps, extra wide flared bottom with slip resistant feet. Converts to twin stepladder, stairway stepladder, extension ladder and 2-scaffold bases. Stair and step height 5' to 9', scaffold length 1' to 4', rails  2-5/8" wide, steps 1" wide, and flange 1" wide. Heavy-duty ladder used by commercial contractors. It opens to 12.5 feet, and closes to 32 inches. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace Engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 32?H x 19.75?W x 4.5?D. 32lbs. Heavy-duty ladder used by commercial contractors. It opens to 15.5 feet, and closes to 36 inches. The ladder locks by the foot, so it's only as tall as you need it to be. Features patented True Telescoping Technology. Aerospace engineered using airplane grade aluminum alloy for strength. Double overmolded feet for durability and traction. Angled Thumb Release to ensure proper hand position. Integrated carrying handle for easy transportation. Clean Touch Anodized Finish is easy to clean. Storage dimensions: 36?H x 19.75?W x 4.5?D. 36lbs.
National Gypsum CB3612 Permabase Cement Backerboard National Gypsum CB2314 Permabase Cement Underlayment
A rigid substrate made of Portland cement, aggregate and glass mesh. It provides a hard, durable surface that is able to withstand prolonged exposure to moisture. An ideal underlayment for interior applications such as shower and tub enclosures, countertops and floors as well as exterior applications such as stone and/or thin brick. A rigid substrate made of Portland cement, aggregate and glass mesh. It provides a hard, durable surface that is able to withstand prolonged exposure to moisture.  An ideal underlayment for ceramic tile on floors, countertops, tub decks and outdoor kitchen counters.
   
 
1