Home > ELECTRICAL > LIGHTING & CEILING FANS > FLUORESCENT FIXTURES & PARTS
Choose a sub category:
FLUORESCENT FIXTURES-DECOR TILE GROUT FLUORESCENT CIRCLINE FIXTURES
MORTAR CEMENT BACKERBOARD SHOP LIGHTS
FLUORESCENT FIXTURE PARTS/PAN TILE SEALERS FLUORESCENT BALLASTS
TILE CLEANERS FLUORESCENT STARTERS
Sort By:
1
Jandorf 60492 Lampholder Fixture Socket Arrow Hart 2507W-BOX Slimline Lampholder Jandorf 60496 Lampholder Fixture Socket
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
Cooper BP45FS2 All Purpose Fluorescent Starter Cooper BP45-FS4 All Purpose Fluorescent Starter Jandorf 60490 Lampholder Fixture Socket
All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base
MOUNT PLATE 4IN STRIP LIGHT   Jandorf 60493 Lampholder Fixture Socket Jandorf 60497 Lampholder Fixture Socket
Junction box cover plate. 4 inch. Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base, Plunger Terminal Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
SOCKET NON SHUNTED 4 PACK     Jandorf 60491 Lampholder Fixture Socket Jandorf 60494 Lampholder Fixture Socket
Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets. Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp, Plunger Terminal
Jandorf 60488 Lampholder Fixture Socket Jandorf 60487 Lampholder Fixture Socket CustomBlend CBTSG50 Standard Thin?Set?Mortar
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
LINK CORD 5FT SHOP/STRIP LIGHT Philips Comp-Covered LC1420CI Magnetic Ballast CustomBlend CBTSW50 Standard Thin?Set?Mortar
For use with ETI linkable LED fixtures. For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. Economical blend. Recommended for floor installations. Good for setting Saltillo and other similar clay pavers.  Mix with custom additives, for increased performance. Meets ANSI A118.1 without additives. Meets ANSI A118.4 and ANSI A118.11 when mixed with Acrylic Mortar Admix. High performance unmodified mortar for most basic tile jobs. Premium quality and economy. Ultra smooth and creamy. Exceeds ANSI A118.1 without additives and Exceeds ANSI A118.4 and ANSI A118.11 when mixed with AMA or CustomFlex. 20 percent greater coverage. Use on vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement; brick and mini-brick, precast terrazzo; natural stone tile; and impervious porcelain tile, glass mosaics. Covers 85 - 95 sq. ft. (7.9 - 8.4 sq m) per 50 lbs (22.68 kg). applied with a 1/4" x 1/4" x 1/4" square-notch trowel.
SOCKETS U-BEND BI-PIN NON SHNT Versabond MTSG25 Fortified Thin-Set Mortar SOCKETS T8 BI-PIN NON SHUNT
Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets.
Feit FS5/10 Fluorescent Starter with Condenser Feit FS2/10 Fluorescent Starter with Condenser Feit FS4/10 Fluorescent Starter with Condenser
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser. Long life fluorescent starter with condenser.
Feit FS22/10 Fluorescent Starter with Condenser Acuity 1233/147YPY Fluorescent Shoplight Fixture Arrow Hart 2510W-BOX Short Lampholder
Long life fluorescent starter with condenser. For task lighting, single reflector, Includes 5' cord and plug, uses two 40W T12 48 inch fluorescent lamps, not included. UL Listed. Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts.
Arrow Hart 2509W-BOX Standard Lampholder Versabond MTSG50 Fortified Thin-Set Mortar Henry 425 Tileflex Thin-Set Mortar
Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel.
SpeedSet SDS25 Fortified Thin?Set?Mortar Versabond MTSW50 Fortified Thin-Set Mortar WW Henry 13080 Tileflex Plus Thin Set Mortar
Polymer-modified mortar for time-critical installations such as restaurants, malls and hotel lobbies. Excellent for cold temperature installations. Grout in 2 hours, traffic in 6. Protected by MoldGard Technology  to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, mosaic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
Henry 527 Tileflex Plus Flexible Thin-Set Mortar Acuity 148TKH Strip Light MTL BRKT FOR 8FT STRP LT RTOFT
Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures.
Acuity 208PUR High-Low Fluorescent Shoplight Fixture Philips Centium ICN2P32N35I Electronic Ballast Henry 425 Tileflex Thin-Set Mortar
For use in garages, basements, work areas and utility rooms. Features exposed lamps, a single segment reflector. Housing and cover are die-formed of 26 gauge cold rolled steel. 120 volt, 60 hz AC operation. 0 degree Fahrenheit cold start-up. Rotating lock, medium bi-pin lamp holders. Fully assembled with 6' power cord and 3-prong plug. Suspended mounting only with included chain. 3" minimum spacing from ceiling. Uses (2) T8 48" lamps. 49-1/2" length x 6-1/4" width x 2-3/4" depth. Lamps not included. UL Listed. For use with 1 or 2 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except F32T8/ES 60 degrees). UL and CSA Listed. Portland cement-based polymer modified. For the installation of quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior absorbent concrete surfaces. Covers 70 to 80 sq. ft. per 40 lbs. bag with 1/4" x 1/4" x 1/4" square notched trowel.
Philips Centium ICN2S40N Electronic Ballast VersaBond?Flex VBFG50 All Purpose Fortified Thin?Set?Mortar Henry 527 Tileflex Plus Flexible Thin-Set Mortar
For use with one or two F30T12, F34T12 or F40T12 bulbs. Minimum start temperature 50 degrees. 120-277 volt. UL and CSA Listed. Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
Acuity 204RUF Strip Light Philips Centium ICN4P32N35I Electronic Ballast Henry 348 Tileflex CeMastic Tile Setting Adhesive
Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. For use with 3 or 4 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except for F32T8/ES 60 degrees). 120-277 volt. UL and CSA listed. Use for setting all types of tile. Use over any surface such as floors, walls and countertops. Dries fast. Strength of a thin set mortar, ease of use of a mastic. Water resistant. Yields over one gallon of adhesive. Covers 60 sq. ft. per 7.5 lb. box when applied with a 5/32"D x 3/16"W V-notched trowel for setting floor and wall tile up to 8" x 8". Over 8" x 8" with a 1/4" x 1/4" x 1/4" square notched trowel covers 25 sq. ft. per 7.5 lb. box.
Henry 316 Marbleflex Fast Setting Thin-Set Adhesive Acuity 172J2C Fluorescent Shoplight Fixture Henry 527 Tileflex Plus Flexible Thin-Set Mortar
Sets all types of natural stone, marble and ceramic tile. Use for interior floors and walls. Fast drying. Grout in 2 hours. Bonds non-moisture and moisture sensitive marble, granite, and stone tile, mosaics, pavers, and regular ceramic tile to concrete, concrete backer units, masonry, cement terrazzo, drywall and other common building surfaces on interior floors, walls and countertops. Wood, laminate, and ceramic surfaces must be prepared with henry waterproofing membrane or Henry floor primer prior to installation. For setting floor and wall tile up to 12" x 12" with 1/4" x 1/4" x 1/4" square notched trowel covers 19-22 sq. ft. per 12.5 Lb. box. For setting floor and wall tile over 12" x 12" with 1/4" x 3/8" x 1/4" square notched trowel covers 16-19 sq. ft. per 12.5 Lb. box. Galvanized treadplate reflector produces more light output than standard shoplights. For residential applications, 12" hanging chain, 5' grounded cord and plug. Operates with 2-32 watt T8 lamps. Low noise, instant-on, start at 0 degrees F. Thermally protected unit for energy efficiency. For use with non-dimmable switches only. UL Listed. ENERGY STAR Portland cement-based polymer modified. For the installation of porcelain, quarry, stone, ceramic and mosaic tile over most interior and exterior surfaces. Can also be used to install porcelain tile over interior plywood floors. Spread ratio with the 1/4" x 1/4" x 1/4" is 80 square feet per 40 lbs.
VersaBond?Flex VBFW50 All Purpose Fortified Thin?Set?Mortar WRAP FLUORESCENT T8 2-BULB 17W STRIPLT 1LT LOWPROF T8 120V2FT
Polymer-modified for strength, just add water. Adheres to most surfaces and types of tile. Bonds well to vitreous, semi-vitreous or absorptive tile: ceramic quarry, cement; impervious porcelain tile, glass mosaics, brick and mini-brick, precast terrazzo, and natural stone tile. Fast setting even in cold weather. Exceeds ANSI: A118.4 and A118.11. Covers 80 - 90 sq. ft. per 50 lbs. when applied with a 1/4" x 1/4" x 1/4" square-notch trowel. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed.
Acuity 3348/127N4C Economy Low Profile Fluorescent Ceiling Wrap Acuity 204RUH Strip Light Arrow Hart 2506W-BOX Stationary Slimline Lampholder
Wraparound fixture with acrylic prism diffuser. 48",  32 watt, residential use. Uses two F32T8 lamps, not included. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Custom Building MGMM50 Medium Bed Mortar STRIPLIGHT LOW PROF 1LT T8 4FT Arrow Hart 924W-BOX Standard Lampholder
For small to large format natural stone, ceramic or porcelain tile 15" x 15" or larger, clay pavers or other thin or medium bed applications. Non-slumping formula that eliminates lippage and minimizes leveling requirements. Can be applied for horizontal applications as thick as 3/4" or for thin bed applications to 1/4". Covers 35-100 sq ft. per 50 lb bag. Coverage depends upon trowel size. Exceeds ANSI A118.1, A118.4, and A118.11. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts.
Philips NPF RLCS140TPWI Magnetic Ballast Philips STD RS2232TPWI Magnetic Ballast Arrow Hart 2503W-BOX Stationary Slimline Lampholder
For use with one FC12T9 or FC16T9 Circline bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. For use with one FC8T9 and one FC12T9 Circline bulbs.  Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Acuity 204RUG Strip Light Advance Centium ICN-2P60-N35I Electronic Lamp Ballast Acuity 208GJ1 Strip Light
Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. For use with one or two F72T12, F96T12 or F96T12/ES bulbs. Minimum start temperature 0 degrees (except F96T12/ES- 60 degrees). 120-277 volt. UL and CSA listed. Provides general illumination. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps. cULus listed for damp locations.
FLUORESCENT STRIP LIGHT 4FT T8 Arrow Hart 2504W-BOX Slimline Lampholder FlexBond FB50 Crack?Prevention?Mortar
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. Premium quality, polymer-modified mortar with outstanding flexibility and bond strength. FlexBond is exceptional for tiling over difficult-to-bond surfaces and for setting impervious porcelain or glass tile. Isolates cracks up to 1/16? and withstands minor substrate deflection. Protected by MoldGard Technology to resist mold and mildew growth. Tile Types: Vitreous, semi-vitreous or absorptive tile: ceramic, quarry, cement. Impervious porcelain and glass tile, brick and mini-brick, precast terrazzo, natural stone tile. Substrates: Concrete, mortar beds, masonry, Portland cement plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, sheet vinyl flooring, VCT, plastic laminates, cutback adhesive.
Advance Optanium IOP-2P59-N35I Electronic Lamp Ballast LIGHT STRIP 2FT LINK LED 10W  FIXTURE LIGHT 2LMP WHT 32W 4FT
For use with one or two F72T8 or F96T8 bulbs. Minimum start temperature 32 degrees (Except F96T8 E/S 60 degrees). 120-277 volt. UL and CSA listed. Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only.
STRIPLIGHT 1LT LOW PROF T8 2FT FIXTURE CIRC FLUSH 22/32W WHT FIXTURE CIRC FLUSH 22W/32W CRM
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations.
STRIPLIGHT 2LT GEN PURP T8 4FT Acuity 645625 Fluorescent Strip Light Fixture SHOPLIGHT LED 4FT WHITE
SHOPLIGHT LED 4FT WHITE
Our Price: $44.34
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Flush, stem or row mounting. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint. Commercial universal voltage, 120-277V, 50/60 Hz AC high power factor electronic ballast. Use with T8 fluorescent linear lamps, not included. 48" length x 4-3/4" width x 3-1/4" depth. cULus listed for damp locations. LED shop light, 50,000 hour rated life. 28 watts,120 volts, 3100 lumens, 4000K. White housing with white ends and 5 foot white cord and plug. On/off pull chain. With 9-1/2" mounting chains and S hooks. Provides general illumination in residential and light commercial applications. Ideal for use in workshops, utility rooms, and garages. UL listed to US and Canadian safety standards. 46-5/8"L x 3-3/4"W x 2-3/8"H. 2 pounds.
SHOPLIGHT 2FT LED 18W LINKABLE LIGHT SHOP LED 5000L 48IN N/L FIXTURE LOWPROF RD 22/32W 14IN
Linkable 2' shoplight comes with a 5' power cord, 5' linking cable, end to end connector and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages and more. 18 watts, 120 volt, 1600 lumens, 4000K. Instant start down to -4 degreesF. 50,000 hours rated life. Energy Star and cUL Certified. LED shoplight, 40,000 hrs life, 45 in on/off pull cord, mounted with two 12-inch chains, powered by 5 ft. 18/3 SJT cord. Decorative light fixture all white. Acrylic housing material. 2 light, electronic ballast. 22/32W Circline.
SimpleSet CTTSG1-2 Pre?Mixed Thin?Set?Mortar FIXTURE TROFFER 2LT U31W 2X2FT SimpleSet STTSW1-2 Pre?Mixed Thin?Set?Mortar
Bonds ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile. High performance static T8 fixture for recessed applications. Suitable for damp locations. Uses 2 bulbs, 31 watts, 24". UL Listed. Bonds porcelain, stone, marble, granite and ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136.1 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile.
Philips Centium ICN2S110SC Electronic Ballast Acuity 211H2M High Output Strip Light Custom Building AMA2 Thin-Set Mortar Adhesive Mix
For use with one or two high output bulbs - F48T12/HO, F60T12/HO, F72T12/HO or F96T12/HO. Minimum start temperature -20 degrees (except F96T12/HO E/S 60 degrees). 120-277 volt. UL and CSA Listed. Rugged steel chassis with baked white enamel finishing. Flush, stem or row mounting. Can be hung individually or in continuous runs. 20 degree Fahrenheit starting temperature. 4-1/4" width x 3" depth. Lamps not included. Mix with custom standard thin-set mortars. Increases bond strength and performance. Improves water resistance. Designed to be used in place of water to increase performance and bond strength of PremiumPlus, CustomBlend and Wall Tile Thin-set Mortars, non-polymer modified grouts or Portland cement mortar mixes. Adds water resistance and improves shock absorption. Meets ANSI A118.4 and A118.11 installation requirements. Use on interior and exterior floors, walls, countertops. For coverage refer to individual Custom Thin-Set Mortars.
Arrow Hart 2500W-BOX Fixed Lampholder Acuity 256441 Tandem Fluorescent Strip LIGHT SHOP LED 3200LUMEN
Molded of durable white thermoset plastic. Can be used for flush or surface mounting. Push wire cap, screw switch. Maximum 660 watts, 600 volts. UL Listed. Two 48" fixtures in tandem using two medium bi-pin bulbs each. Flush, stem or row mounting, rugged steel chassis with baked white enamel finish. Uses four 32 watt T-8 lamps, not included. UL Listed for damp locations. Designed to be used anywhere a traditional fluorescent fixture is used. 3200 lumens, powered by 5? AWG cord 18/2, 40,000 hours of LED life. (2) 12 inch mounting chains and (2) hooks, on/off pull chain. 40 watts, 80 CRI, 4000K, 120 degree beam width. Non-Linkable, Long LED life, Lightweight and Powerful
STRIP LIGHT 2FT LED 20W 4000K Acuity 256439 Narrow Wrap Fluorescent Fixture LIGHT STRIP 4FT LINK LED 20W
Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Low profile, narrow wrap light fixture, 2 light, 32 watt. White steel housing and clear prismatic diffuser with white metal ends. Diffuser hinges from either side for easy mounting. Uses 2 each F32  T8 lamps (not included). Energy star qualified, meets new energy legislation requirements. 48-1/4" x 7-9/16" x 3". Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations.
SHOP LIGHT 3FT LED 42W 3200LMN SimpleSet CTTSG3 Pre?Mixed Thin?Set?Mortar SimpleSet STTSW3 Pre?Mixed Thin?Set Mortar
Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified. Bonds ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile. Bonds porcelain, stone, marble, granite and ceramic tile up to 18" x 18". For interior wall and floor installations. Exceeds ANSI A136.1 Type I. Covers 20 to 50 sq. ft. depending upon the size of trowel and tile.
Howard FSR84432ASEMV000I Fluorescent Retro Fit Kit SHOPLIGHT HEAVY DUTY GRID 4LT Acuity 199YWJ Fluorescent Strip Light Fixture
Fluorescent strip channel retrofit kit to upgrade an existing 8? strip fixture into a newer and more efficient electronic T8 strip. Uses two (2) 4? gear trays that install independently for easy installation. Lampholder cutouts guarantee correct spacing and that lampholder will not fall out during install. Code gauge steel. High gloss, baked enamel finish. NEC compliant luminaire power disconnect standard. Contents: 2 gear trays with fully wired high efficiency instant start T8 ballast and lampholders, 12 tek screws, 4 gear tray tethers. Electronic ballast, inherent thermal protection, class P. 8' length, 4.25" width, uses 4 lamps, not included. 120-277 input volts. UL Listed. For residential and light commercial applications. Steel wireguard helps provide protection for the bulb. Fully assembled, ready-to-install. Includes a 5' power cord, 5A maximum convenience outlet and a pull chain power switch. The residential electronic ballast (120V 60Hz 1.50 Amps) starts reliably down to 0 degrees F. Mount to ceiling using the 12" mounting chains, included. Uses (4) 32W linear T8 fluorescent lamps, (not included). All mounting hardware is included. For use on non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Energy Star certified. White double striplite. Uses two 59 watt bulbs, not included. UL Listed.
FIXTURE TROFFER 4LIGHT 2FTX4FT Acuity 111AFH Strip Light Arrow Hart 2501W-BOX Lampholder
For use with T8 lamps, electronic ballasts and sockets. Smooth hemmed sides and inward formed end flanges for safe handling. Lighter weight fixture. Standard steel door frame with precision flush mitered corners, allows easy lens replacement without frame disassembly (for lenses up to .156" thick). Powder-painted, steel latches. Mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material UV stabilized. No asbestos is used in this product. Suitable for damp locations. UL Listed. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Heavy-duty channel is die-formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Housing is finished in lighting grade white baked gloss enamel paint. No diffuser, fluorescent lamp is exposed. For use with 59 watt, 96" T8 slimline linear lamps. The fixture is cULus listed for damp locations. Molded of durable white thermoset plastic. Can be used for flush or surface mounting. Push wire cap, screw switch. Maximum 660 watts, 600 volts. UL Listed.
LIGHT SHOP LINK 4000K 4FT 35W RETROFIT LED KIT WITH TUBES   FIXTURE WRP4LT 32W 4FT OAK END
Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified. Replacement for an older T12 or T8 8 foot strip light. Kit contains 4-4 foot LED tubes, 8 non shunted sockets and 1 metal retrofit kit. Integral driver bypasses the ballast. 15 watts per LED tube - (60 watts total). 120-277 volt, 1800 lumens per LED tube - (7200 lumens total), 5000K. Instant start down to -4 degreesF. 50,000 hours rated life. DLC and cUL certified. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only.
Acuity 987213 Wrap Around Fluorescent Fixture STRIP LIGHT 4FT LED 40W 4000K FIXTURE 4L 32W SQ BSKTWRAP 4FT
Economical low profile with a narrow wrap. Clear prismatic diffuser. Diffuser hinges from either side for easy mounting. Stem, continuous or individual mounting. 48-1/4" x 13" x 3". Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Uses 4-32 watt lamps, 120-277 volt. For surface or stem mounting, individual or row installation. Linear side prisms control brightness, pyramidal bottom prisms minimize lamp image. Diffuser hinges open from either side for easy maintenance. Full depth, white enamel end plates. Die-formed from code-gauge cold-rolled steel. Channel cover snaps into place without the use of tools. Diffuser is extruded clear acrylic. Five-stage iron-phosphate pretreatment. Finished with high-gloss, baked white enamel. Thermally protected, suitable for damp locations. AWM, TFN or THHN wire used throughout. UL and C-UL Listed.
Western FP00320044 Pre-Mixed Grout? and Thin-Set SHOPLIGHT 40IN LED50W BLUTOOTH LIGHT LED VAPRTIGHT4FT 3600LMS
Formulated for the installation of quarry, ceramic and mastic tile on walls. Can be used to install or repair tile in showers, in bathrooms, and on backsplashes. Ready-to-use. Bluetooth speaker enhanced LED shoplight comes with 2 speakers and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages or anywhere additional light is needed. Bluetooth speakers pair with IPhone and Android smart phones. Speakers have a 30 foot range. 35 watts, 120 volt, 3200 lumens, 4000K, 50,000 hours rated life. Instant start down to -4 degreesF. Energy Star and cUL certified. Multi-volt LED fixture, has a high impact poly-carbonate diffuser. 43 watts, 120-277 volts, 3600 lumens, 4000K, 86CRI. 50,000 hours rated lifetime. UL/cUL Wet Locations, IP65 Rated. Energy Star. 47.7" Length x 4.57" Width x 2.91" Height.
Feit 48PT Fluorescent Tube Guards Feit 4'PT Fluorescent Tube Guards FIXTURE FLUO OVAL CIRC 2-32WT9
Endcaps are made of black, high heat polypropylene. UL Listed. Endcaps are made of black, high heat polypropylene. UL Listed. Residential and light commercial applications. White glass diffuser for a widespread uniform illumination. Center finial provides easy access for cleaning and maintenance. Includes (1) 55W 2C T6 2700K fluorescent lamp. Standard with 120V residential electronic ballast, 60HZ. No flickering and quiet operation without interfering with other home electronics. CUL listed to US and Canadian safety standards and suitable for damp locations.
LITEPUFF FLUSHMNT 2LT 32W1X4FT LIGHT STRIP 8FT T8 HIGH OUTPUT LITEPUFF FLUSH 4LT 32W 1.5X4FT
Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed. For unit or row installations, surface or suspended mounting. Thermally protected, resetting. Heavy-duty channel, die-formed from code-gauge steel. Channel cover secured by captive quarter-turn latch. Five-stage iron phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. UL listed to US and Canadian safety standards. Damp location listed, listed for 25 degree C ambient temperature. Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed.
LADDER PRO PLATFORM FG 3 FT   Werner PD6203 Podium Ladder LADDER PRO PLATFORM FG 4 FT
Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?.
Feit 8'PT Fluorescent Tube Guards Werner D5916-2 Multi-Section Extension Ladder Louisville FP1500 Platform Step Ladder
Endcaps are made of black, high heat polypropylene. UL Listed. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Non-conductive. Includes DA BOOT and top rail guard. Thick non-marring thermoplastic elastomer tread is bonded and mechanically fastened to the upper boot and provides a slip resistant footing. Slip resistant platform. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. 20-1/2 x 16" platform.
Werner P6206 Platform Ladder Werner PD6204 Podium Ladder Werner D6016-2 Multi-Section Extension Ladder
Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE0600 Commercial Extension Ladder Werner PD6206 Podium Ladder Werner D6216-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner D5920-2 Multi-Section Extension Ladder Plaskolite 1199233A Lighting Panel Werner D6020-2 Multi-Section Extension Ladder
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Werner P6208 Platform Ladder Louisville FE1700 2-Section Extension Ladder Werner D5924-2 Multi-Section Extension Ladder
Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder Werner D6220-2 Multi-Section Extension Ladder Werner D6024-2 Multi-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE0600 Commercial Extension Ladder Duralens 1A30083A Grade Lighting Panel Optix 1420083A Non-Yellowing Weatherable Lighting Panel
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Virtually unbreakable, non-yellowing and easy to cut. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 7.87 Sq. Ft., 23-3/4" x 47-3/4". Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed.
Optix 1A20084A Non-Yellowing Weatherable Lighting Panel Optix 1A20083A Non-Yellowing Weatherable Lighting Panel Louisville FE3200 Extension Ladder With Pro Top
Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
DeWalt DXL3020-24PT Extension Ladder Werner D6224-2 Multi-Section Extension Ladder Duralens 1430083A Grade Lighting Panel
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Virtually unbreakable, non-yellowing and easy to cut. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 7.87 Sq. Ft., 23-3/4" x 47-3/4".
Werner D6028-2 Multi-Section Extension Ladder Werner D6228-2 Multi-Section Extension Ladder The Equalizer D8200-2EQ Multi-Section Extension Ladder
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder DeWalt DXL3020-28PT Extension Ladder Werner D6232-2 Multi-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE3200 Extension Ladder Werner D6240-2 Multi-Section Extension Ladder Louisville FE3200 2-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1