Home > ELECTRICAL > LIGHTING & CEILING FANS > LAMP & FAN PARTS > LAMP DIMMERS
Sort By:
1
Polyblend WDG1-6 Dry Non-Sanded Polymer Modified Tile Grout Arrow Hart 2507W-BOX Slimline Lampholder Jandorf 60492 Lampholder Fixture Socket
For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
Cooper BP45FS2 All Purpose Fluorescent Starter Cooper BP45-FS4 All Purpose Fluorescent Starter Red? Devil 425 Pre-Mixed Tile Grout?
All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. All purpose, two terminal, standard. Accurately timed to combine starts with long bulb life. For use where lights are turned on more than five times daily. Also, in devices where bulb life expectancy is two years or less. No.BP45FS2: is used for 18" long 15 watt bulbs or 24" long 20 watt bulbs. No.BP45-FS4 is used for 36" long 30 watt bulbs and 48" long 40 watt bulbs. Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application.
Jandorf 60496 Lampholder Fixture Socket Savogran 12841 Tile Grout? MOUNT PLATE 4IN STRIP LIGHT
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Waterproof cement that mixes with water to a smooth paste for grouting ceramic/mosaic tiles. Recommended for new installations or repairing and replacing bathroom, shower stall and kitchen wall, floor, ceiling and counter tiles. Not a tub caulk. Junction box cover plate. 4 inch.
Jandorf 60490 Lampholder Fixture Socket House & Home Restore 438 Pre-Mixed Tile Grout? Jandorf 60493 Lampholder Fixture Socket
Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base For repairing loose, cracked or damaged grout in ceramic and mosaic tile. Mildew and water resistant after full cure. Equipped with winder to enable evacuation of more caulk from squeeze tube. Jandorf Lamp Socket, 660 W Lamp, 1000 V, Fluorescent Lamp, Single Pin Base, Plunger Terminal
Jandorf 60497 Lampholder Fixture Socket SOCKET NON SHUNTED 4 PACK     Werner AC27-L Paint Cup Liner
Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets. Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners.
Savogran 12860 Ready-To-Use Tile Grout Jandorf 60491 Lampholder Fixture Socket Jandorf 60494 Lampholder Fixture Socket
A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk. Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp Jandorf Lamp Socket, Low Profile, 660 W Lamp, 1000 V, Fluorescent Lamp, Plunger Terminal
White Dry WDG5-4  Non-Shrinking Non?Sanded Tile Grout? Jandorf 60488 Lampholder Fixture Socket Jandorf 60487 Lampholder Fixture Socket
For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base Jandorf Lamp Socket, 660 W Lamp, 600 V, Fluorescent Lamp, Medium Bi-Pin Base
American Tack 6009B Incandescent Dimm LINK CORD 5FT SHOP/STRIP LIGHT Red? Devil 428 Pre-Mixed Tile Grout?
Converts any lamp to full range dimming. Range from night light to full brightness. Eliminates the need for expensive 3-way bulbs. Compact size fits most lighting fixtures. Screws in, no wiring required. Works with incandescent bulbs and many dimmable LED bulbs. Manual dimmer. 100 watts maximum. Plastic housing. 2.5" x 2.08" x 1.96". For use with ETI linkable LED fixtures. Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application.
American Tack 6603BC Incand Dimmers Savogran 12861 Pre-Mixed Ready-To-Use Tile Grout? Philips Comp-Covered LC1420CI Magnetic Ballast
Lamp socket 3-Level dimmer. Converts any lamp with metal socket to a touch dimmer. Use regular bulb instead of 3-way bulb. Works with incandescent bulbs and many dimmable LED bulbs. 150 watts maximum. Plastic housing. 3.4" x 2.4" x 2.4". A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk. For use with one F14T8, F15T8, F18T8, F19T8, F14T12, F15T12, or F20T12 bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed.
Western FP00320034 Pre-Mixed Grout? and Thin-Set Red? Devil 424 Pre-Mixed Tile Grout? SOCKETS U-BEND BI-PIN NON SHNT
Formulated for the installation of quarry, ceramic and mastic tile on walls. Can be used to install or repair tile in showers, in bathrooms, and on backsplashes. Ready-to-use. Water-resistant compound grouts all ceramic and mosaic tile. Formulated with premium acrylic latex for fast, easy-to-use application. Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets.
Werner AC19 Extension Ladder Cover SOCKETS T8 BI-PIN NON SHUNT   White Dry WDG25  Non-Shrinking Non?Sanded Tile Grout?
Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches. Universal non shunted bi-pin T8/T12 tombstone and U-shape tombstone replacement sockets. For grouting porous floor and wall tiles with joints up to 1/8" wide. Use with glazed tile and polished marble that can be scratched by sanded grout. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Cures hard, is non-shrinking and durable. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG3707-4 Sanded Tile Grout? Polyblend PBG527-4 Sanded Tile Grout? Polyblend PBG3867-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG507-4 Sanded Tile Grout? Polyblend PBG1457-4 Sanded Tile Grout? Polyblend PBG3817-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG3807-4 Sanded Tile Grout? Polyblend PBG1657-4 Sanded Tile Grout? Polyblend PBG607-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG117-4 Sanded Tile Grout? Polyblend PBG107-4 Sanded Tile Grout? Polyblend PBG097-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1567-4 Sanded Tile Grout? Polyblend PBG1807-4 Sanded Tile Grout? Polyblend PBG457-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1227-4 Sanded Tile Grout? Polyblend PBG227-4 Sanded Tile Grout? Polyblend PBG3827-4 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG197-4 Sanded Tile Grout? Werner AC27-P Lock-In Paint Cup American Tack 4010W Incand/Halogen Dimmer
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080). Converts any lamp to full range dimming. For incandescent, halogen and many dimmable LED bulbs. LED locator light. 6 foot power cord. Non-skid, non-mar base. 300 watts maximum, Plastic housing. 4.6" x 2.35" x 2"
GROUT PREMIXED BRIGHT WHT 1QT GROUT PREMIXED LINEN 1QT      GROUT PREMIX DELOREAN GRAY 1QT
Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls.
Arrow Hart 2510W-BOX Short Lampholder Feit FS5/10 Fluorescent Starter with Condenser Feit FS2/10 Fluorescent Starter with Condenser
Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts. Long life fluorescent starter with condenser. Long life fluorescent starter with condenser.
Feit FS4/10 Fluorescent Starter with Condenser Feit FS22/10 Fluorescent Starter with Condenser Cl Credenza Table Lamp Dimmer
Long life fluorescent starter with condenser. Long life fluorescent starter with condenser. For use with table, floor, or hanging lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Requires no wiring, just plug-in. 120 volt, 60 Hz. UL Listed. 300 watt maximum incandescent or halogen.
Arrow Hart 2509W-BOX Standard Lampholder Savogran 12862 Pre-Mixed Ready-To-Use Tile Grout? Savogran 12842 Tile Grout?
Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts. A smooth acrylic latex formula, ready to use from the can. For grouting new tile or tile repair. Use in mosaic work, to reset ceramic pieces or around shower, tubs, sinks and marble sills. Can be applied with moistened finger, cloth or spatula. Sets quickly, may be tinted with any latex or universal colorant. Acrylic latex formula stay bright white. Not a tub caulk. Waterproof cement that mixes with water to a smooth paste for grouting ceramic/mosaic tiles. Recommended for new installations or repairing and replacing bathroom, shower stall and kitchen wall, floor, ceiling and counter tiles. Not a tub caulk.
Westinghouse 7080100 Lamp Dimmer American Tack 6004B Incandescent Dimmers Polyblend PBG0925 Sanded Tile Grout?
For torchiere lamps. Knob included. 120 VAC. 500 watt maximum. Space saving design allows for surrounding outlets to be used. Converts any lamp with metal to a 3-level touch dimmer. Touch any metal part of the lamp including the harp to select light level. Use regular incandescent and LED bulbs instead of expensive 3-way bulbs. Works with incandescent bulbs and many dimmable LED bulbs. 200 watts maximum. Plastic housing. Plug-In connection, plug lamp into dimmer and dimmer into outlet. 1.73" x 2.6" x 1.36". For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG38025 Sanded Tile Grout? Polyblend PBG38625 Sanded Tile Grout? Polyblend PBG12225 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG1025 Sanded Tile Grout? Polyblend PBG1125 Sanded Tile Grout? Polyblend PBG6025 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG16525 Sanded Tile Grout? Polyblend PBG5225 Sanded Tile Grout? Polyblend PBG38225 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG5025 Sanded Tile Grout? Polyblend PBG38125 Sanded Tile Grout? Polyblend PBG18025 Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG14525 Sanded Tile Grout? Polyblend PBG1925 Sanded Tile Grout? Polyblend PBG1110 Non?Sanded Tile Grout?
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
Polyblend PBG0910 Non?Sanded Tile Grout? Polyblend PBG5210 Non?Sanded Tile Grout? Polyblend PBG38010 Non?Sanded Tile Grout?
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use.
Polyblend PBG16510 Non?Sanded Tile Grout? Polyblend PBG1010 Non?Sanded Tile Grout? Polyblend PBG2225 Sanded Tile Grout?
Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. Portland cement dry grout used for joints up to 1/8" wide. For highly glazed ceramic tile or highly polished marble or natural stone that can be scratched by sanded grouts. Use on floors, countertops, walls, ceilings, showers, fountains and pools. Non-shrinking and durable. Meets ANSI A118.6 specifications. Rated (ASTM C67) for residential to extra heavy commercial use. For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width.
Polyblend PBG4525 Sanded Tile Grout? DIMMER CFL/LED LAMP SLIDE WHT Staples 611F Tear Resistant Weather Resistant Ladder Mitt
For installations. For grouting vitreous, semi-vitreous or absorptive tile including ceramic, mosaic, quarry, pavers, cement, porcelain, brick, mini-brick, precast terrazzo and natural stone, for grout joints from 1/8" to 1/2" wide. Use on floors, countertops, walls, ceilings, showers. Smooth texture for easy spreading and cleanup. Rock-hard curing properties, dense joints that are highly resistant to shrinking, cracking, powdering and wear. Polymer-modified, mix with water for any tile or stone installation. Meets ANSI A118.6 specifications. Coverage will vary depending on tile size and joint width. For use with table and floor lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Utilizes HED Technology, which features advanced dimming circuitry that is designed for compatibility with most dimmable CFL and LED bulbs. Single-pole lamp dimmer. 100 watt CFL/LED. Requires no wiring, just plug-in. 120 volt. Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA.
Werner PK76-3 Auto Closing Pail Shelf Philips Centium ICN2P32N35I Electronic Ballast Werner PK76 2-Piece Pail Shelf
Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included. For use with 1 or 2 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except F32T8/ES 60 degrees). UL and CSA Listed. Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included.
Philips Centium ICN2S40N Electronic Ballast Arrow Hart 2506W-BOX Stationary Slimline Lampholder Philips Centium ICN4P32N35I Electronic Ballast
For use with one or two F30T12, F34T12 or F40T12 bulbs. Minimum start temperature 50 degrees. 120-277 volt. UL and CSA Listed. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. For use with 3 or 4 F17T8, F25T8, F32T8 or F32T8/ES bulbs. Minimum start temperature 0 degrees (Except for F32T8/ES 60 degrees). 120-277 volt. UL and CSA listed.
Arrow Hart 924W-BOX Standard Lampholder Werner AC50-JB-3 Lock-In Job Bucket Arrow Hart 2503W-BOX Stationary Slimline Lampholder
Commercial grade white fluorescent lampholder. For use with fluorescent lighting fixtures in flush or surface mount applications. Maximum 660 watts, 600 volts. Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation. White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C.
Philips NPF RLCS140TPWI Magnetic Ballast Werner AC96 Extension Ladder Stabilizer Philips STD RS2232TPWI Magnetic Ballast
For use with one FC12T9 or FC16T9 Circline bulb. Minimum start temperature 50 degrees. 120 volt. UL and CSA listed. Rectangular. For aluminum ladders of all duty ratings and fiberglass ladders with side rails up to 3"H x 1-3/16"W. Also fits Articulated ladder in scaffold or stairway use. Mar-resistant rubber caps protect work surface. Fits aluminum series extension ladders with rails up to 3-5/16" x 1-3/16", D716, D1100, D1200, D1300, D1500, D500 (20' to 24'), M and M1 Multi-Master ladders. Includes paint can hook, mounting hardware and instructions. For use with one FC8T9 and one FC12T9 Circline bulbs.  Minimum start temperature 50 degrees. 120 volt. UL and CSA listed.
Arrow Hart 2504W-BOX Slimline Lampholder Advance Centium ICN-2P60-N35I Electronic Lamp Ballast QualCraft 2481 Weather Resistant Ladder Hook With Wheel
White slimline lampholders. For replacement use in fluorescent lighting fixtures as well as enclosed outdoor signs. Molded of white thermoset plastic for appearance and durability. UL Listed. Temperature rating of -40 to 65 degrees C. For use with one or two F72T12, F96T12 or F96T12/ES bulbs. Minimum start temperature 0 degrees (except F96T12/ES- 60 degrees). 120-277 volt. UL and CSA listed. Fits single or extension ladders in wood, fiberglass, and aluminum in round and "D" rung styles. Constructed of steel for strength, durability and safety. Adjustable to fit between top two ladder rungs.
Werner AC52-UB Lock-In Utility Bucket STABILIZER LADDER             Advance Optanium IOP-2P59-N35I Electronic Lamp Ballast
STABILIZER LADDER
Our Price: $31.96
Expands work surface and customizes ladder tops. For on the jobsite or household use. Locks securely into the ladder top. Can be used for wet or dry applications. Holds up to 1 gallon of liquid and has a 25 lb capacity. Integrated Lock-in System socket on the bucket allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312). Fits extension and single ladders with rail up to 4? x 13/4?. Holds ladder 12? from wall and spans 48? to clear most windows. Stabilizers attach with 2 U-bolts and feature replaceable extra heavy duty rubber tips. Approx. Weight: 6 lbs. For use with one or two F72T8 or F96T8 bulbs. Minimum start temperature 32 degrees (Except F96T8 E/S 60 degrees). 120-277 volt. UL and CSA listed.
Arrow Hart 2500W-BOX Fixed Lampholder QuickClick AC78 Ladder Stabilizer QualCraft Corner Buddy Weather Resistant Ladder Stabilizer
Molded of durable white thermoset plastic. Can be used for flush or surface mounting. Push wire cap, screw switch. Maximum 660 watts, 600 volts. UL Listed. For painting and home repair projects. Spring-loaded locking latch for quick installation and removal. Quick release attach pins connect stabilizer arms to body without tools. Non-marring rubber end caps protect work surface. For use on singles and extensions with 1-1/4" round rungs, 1-1/2" and 1-3/4" flat rungs. No tools required for assembly. 10" standoff from work surface. Designed for use on multi-surfaces, corners, flat, round and multi-dimensional construction. Eases access to gutters and downspouts during installation or repair and to soffits for electrical and siding applications. Can be used all around the house without having to remove from ladder. Easy connection, removal and storage. Powder coated in safety yellow for visibility, with rubber bumpers to protect building surfaces.
Philips Centium ICN2S110SC Electronic Ballast GROUT PREMIXED BRIGHT WHT 1GAL GROUT PREMIXED LINEN 1GAL
For use with one or two high output bulbs - F48T12/HO, F60T12/HO, F72T12/HO or F96T12/HO. Minimum start temperature -20 degrees (except F96T12/HO E/S 60 degrees). 120-277 volt. UL and CSA Listed. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls.
GROUT PREMIX DELOREAN GRAY 1GA Louisville AP8000 Stepstool Arrow Hart 2501W-BOX Lampholder
Shrink and crack-resistant formula is also resistant to common household stains. Easy to use and ideal for grout restoration. For joints 1/16? to 1/2?. Grouts ceramic, mosaic, quarry, porcelain, stone tile, marble and granite. Suitable for wet areas such as tub surrounds, shower floors and shower walls. Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth. Molded of durable white thermoset plastic. Can be used for flush or surface mounting. Push wire cap, screw switch. Maximum 660 watts, 600 volts. UL Listed.
UniFlex Pro 13097 Polymer Modified Sanded Grout? Unipro 13096 Polymer Modified Sanded Grout? Unipro 13089 Polymer Modified Sanded Grout?
Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant. Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant. Premium polymer modified, portland cement-based grout for grouting porcelain, glass, quarry, stone, ceramic and mosaic tile for interior and exterior floors, walls, and countertops. Stain resistant, highly flexible, and water resistant.
Werner 260 Platform Ladder Louisville L-2321 Extension Ladder Feit 48PT Fluorescent Tube Guards
Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Mar-resistant impact caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. D-shaped rungs. Fixed runglock. Slip-resistant feet. Dimensions: Side Rails 2.5" wide; .75" Rail Flange; 1.23" Rung; Base outside width 16"; Fly outside width 16". Meets or exceeds the safety standards set by ANSI and OSHA. Endcaps are made of black, high heat polypropylene. UL Listed.
Feit 4'PT Fluorescent Tube Guards Werner D716-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder
Endcaps are made of black, high heat polypropylene. UL Listed. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
LADDER JACK SHORT-BDY ALU     Werner 260 Platform Ladder Werner D1116-2 Multi-Section Extension Ladder
LADDER JACK SHORT-BDY ALU
Our Price: $98.92
Span 2 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 14 lbs. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
LADDER JACK LONG-BDY ALU      Louisville LeveLok Swivel Ladder Leveler Werner D1120-2 Multi-Section Extension Ladder
LADDER JACK LONG-BDY ALU
Our Price: $112.97
Span 3 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 16 lbs. Extends up to 10" for steps. Attaches to either side or on multiple ladders. Large heavy duty swivel shoe with spurs. With patented KeyLok Quick Connect system. Fits FE1700, FE3200 (16'-32 and 36' - 40'), FE7600, FE4200HD, L-3022-PT, AE3200, AE2200, AE2800, AE1200HD, AE1200, and L-2094. Includes 1 quick connect leveler and 1 set (2) quick connect base units. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner Level-Master PK80 Ladder Leveler With Safety Shoes Louisville L-2324 Extension Ladder Louisville AE4216PG 2-Section Extension Ladder
Steel swivel shoes. Easily locks and levels. Up to 8-1/2" of adjustment. Heavy duty construction. Attaches to ladders side rails with locking nuts and bolts. Width of ladder and leveler is 3-1/4" wider than ladder. Fits aluminum series No. D1100, No. D1200, No. D1300, No. D1500, and No. D500. Fiberglass series No. D5900, No. D6000-2, No. D6200-2, No. 7100, No. D7100, and D7500. Two Level-Master Ladder Levelers (one for each side of ladder), mounting hardware and instructions included. U.L. Listed and Labeled. Meets OSHA Standards. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder Werner D1220-2 Multi-Section Extension Ladder Feit 8'PT Fluorescent Tube Guards
Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Endcaps are made of black, high heat polypropylene. UL Listed.
Louisville L-2324 Extension Ladder Louisville AE4220PG 2-Section Extension Ladder Werner D1124-2 Multi-Section Extension Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1516-2 Multi-Section Extension Ladder Werner D1320-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
Louisville AE4224PG 2-Section Extension Ladder Plaskolite 1199233A Lighting Panel Werner D1224-2 Multi-Section Extension Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
QualCraft Safe-T Ladder Extension System Werner D1520-2 Multi-Section Extension Ladder Werner D1128-2 Multi-Section Extension Ladder
Requires no tools, drilling or bolting to hold it securely in place. Aluminum design keeps handles from getting hot in the sun. Simple to use knob, tightens by hand without scratching or damaging ladder. Cushioned bumper pads help to protect the eaves of the roof. Added hand grips for easier usage. Safety latch prevents unit from slipping off ladder. Complies with OSHA standard 1926.502 (b)(3), 1926.1053 (b)(1) and ANSI standard 14.2 section 8.3.3. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville AE4228PG 2-Section Extension Ladder Werner D1228-2 Multi-Section Extension Ladder Duralens 1A30083A Grade Lighting Panel
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Virtually unbreakable, non-yellowing and easy to cut. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 7.87 Sq. Ft., 23-3/4" x 47-3/4".
Optix 1420083A Non-Yellowing Weatherable Lighting Panel Optix 1A20084A Non-Yellowing Weatherable Lighting Panel Optix 1A20083A Non-Yellowing Weatherable Lighting Panel
Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 3/8" depth. Boxed.
Werner D1324-2 Multi-Section Extension Ladder Werner D1524-2 Multi-Section Extension Ladder The Equalizer D1800-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Eliminates uneven ground. Easy to use, adjust 3/8" increments up to 8-1/4". Convenient, built in bubble level. Dual action foot for use on hard or penetrable surfaces. Lightweight aluminum. Exclusive Alflo Twist-Proof performance. Slip-resistant steps and rugged locks. Reaches areas of the home that traditional ladders cannot. Dimensions: rails 3-5/16" wide, rungs 1-1/2", base widths 17-3/4" outside shoes, flange 1-3/16" wide and fly width 15-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Duralens 1430083A Grade Lighting Panel Werner D1328-2 Multi-Section Extension Ladder Werner D1232-2 Multi-Section Extension Ladder
Virtually unbreakable, non-yellowing and easy to cut. Do-it-yourself, easy to install. Slips out for cleaning. Fits all suspended ceiling systems. 7.87 Sq. Ft., 23-3/4" x 47-3/4". Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1528-2 Multi-Section Extension Ladder Louisville AE4232PG 2-Section Extension Ladder Werner D1332-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1532-2 Multi-Section Extension Ladder Werner D1240-2 Multi-Section Extension Ladder Werner D1340-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1540-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
   
 
1