Home > ELECTRICAL > LIGHTING & CEILING FANS > LAMP & FAN PARTS > SWAG LAMP KITS/HOOKS
Sort By:
1
Westinghouse 7077000 Swag Hook Kit Westinghouse 7045200 Swag Hook Westinghouse 7045000 Swag Hook Kit
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Westinghouse 7045100 Swag Hook Kit Westinghouse 7067000 Oval Fixture Chain 3 ft Acuity 1233/147YPY Fluorescent Shoplight Fixture
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Used to hang lighting fixtures, planters, shelving and wind chimes or as drapery tie backs. For task lighting, single reflector, Includes 5' cord and plug, uses two 40W T12 48 inch fluorescent lamps, not included. UL Listed.
Jandorf 60260 Swag Kit Jandorf 60262 Swag Kit MTL BRKT FOR 8FT STRP LT RTOFT
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Metal bracket used to retrofit 8' Fluorescent strip lights to energy efficient LEDs. Converts both T12 and T8 fixtures.
Jandorf 60261 Swag Kit Acuity 148TKH Strip Light Acuity 208PUR High-Low Fluorescent Shoplight Fixture
Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. For use in garages, basements, work areas and utility rooms. Features exposed lamps, a single segment reflector. Housing and cover are die-formed of 26 gauge cold rolled steel. 120 volt, 60 hz AC operation. 0 degree Fahrenheit cold start-up. Rotating lock, medium bi-pin lamp holders. Fully assembled with 6' power cord and 3-prong plug. Suspended mounting only with included chain. 3" minimum spacing from ceiling. Uses (2) T8 48" lamps. 49-1/2" length x 6-1/4" width x 2-3/4" depth. Lamps not included. UL Listed.
Acuity 204RUF Strip Light Acuity 172J2C Fluorescent Shoplight Fixture WRAP FLUORESCENT T8 2-BULB 17W
Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Galvanized treadplate reflector produces more light output than standard shoplights. For residential applications, 12" hanging chain, 5' grounded cord and plug. Operates with 2-32 watt T8 lamps. Low noise, instant-on, start at 0 degrees F. Thermally protected unit for energy efficiency. For use with non-dimmable switches only. UL Listed. ENERGY STAR Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only.
STRIPLT 1LT LOWPROF T8 120V2FT Acuity 3348/127N4C Economy Low Profile Fluorescent Ceiling Wrap Acuity 204RUH Strip Light
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Wraparound fixture with acrylic prism diffuser. 48",  32 watt, residential use. Uses two F32T8 lamps, not included. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations.
STRIPLIGHT LOW PROF 1LT T8 4FT Acuity 204RUG Strip Light Acuity 208GJ1 Strip Light
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps, not included. cULus listed for damp locations. Provides general illumination. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint.  Use with T8 fluorescent linear lamps. cULus listed for damp locations.
FLUORESCENT STRIP LIGHT 4FT T8 FIXTURE LOWPROF RD 22WT9 11IN LIGHT STRIP 2FT LINK LED 10W
Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Provides general illumination in residential applications. 11" diameter. Uses (1) 22W circline T9 lamp. Low profile styled, round, stay-white, acrylic diffuser. Hidden cam-latches provide easy diffuser removal. Standard with electronic ballast (120 volt, 60Hz). CUL Listed to US and Canadian safety standards and suitable for damp locations. Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations.
Acuity 146V5F Fluorescent Shoplight Fixture FIXTURE LIGHT 2LMP WHT 32W 4FT STRIPLIGHT 1LT LOW PROF T8 2FT
Unit comes fully assembled. 20 gauge 5-3/8" diamond plate reflector. Suspended mounting only with included 12" chain. Minimum spacing from ceiling surface is three inches. Uses 32W linear T8 fluorescent lamps (not included). Quiet running premium electronic ballast. 0 degree cold start-up. Downward facing pull chain for on/off function. 5 foot cord and 3 prong plug included. For use on non-dimmable switches only. All mounting hardware included. cUL, ENERGY STAR. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed.
FIXTURE CIRC FLUSH 22/32W WHT FIXTURE CIRC FLUSH 22W/32W CRM SHOPLIGHT 2FT LED 18W LINKABLE
Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Retro design with exposed circline lamp. Bare lamp provides maximum light output and easy access for cleaning and maintenance. Uses circline T9 lamp for energy efficiency, color rendering and long life (not included). Standard with electronic ballast, 120 volt. No flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Linkable 2' shoplight comes with a 5' power cord, 5' linking cable, end to end connector and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages and more. 18 watts, 120 volt, 1600 lumens, 4000K. Instant start down to -4 degreesF. 50,000 hours rated life. Energy Star and cUL Certified.
LIGHT SHOP LED 5000L 48IN N/L STRIPLIGHT 2LT GEN PURP T8 4FT Acuity 645625 Fluorescent Strip Light Fixture
LED shoplight, 40,000 hrs life, 45 in on/off pull cord, mounted with two 12-inch chains, powered by 5 ft. 18/3 SJT cord. Compact designed channel and cover are formed from code-gauge cold-rolled steel. Back plate offers compact design and additional socket protection. Locking lamp holder tracks bolster strength of the overall strip construction while creating improved lamp stability. Design includes T8 socket, features rotating collar and enclosed contacts. End plates allow for quick attachment. Designed to accommodate a wide variety of T8 lamp lengths. UL Listed. Provides general illumination for indoor and damp applications. Product features include snap assembly of ends, socket bars and wire way cover. Heavy-duty channel is die formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Flush, stem or row mounting. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Fluorescent lamps are exposed, no diffuser. Finished in lighting grade white baked gloss enamel paint. Commercial universal voltage, 120-277V, 50/60 Hz AC high power factor electronic ballast. Use with T8 fluorescent linear lamps, not included. 48" length x 4-3/4" width x 3-1/4" depth. cULus listed for damp locations.
SHOPLIGHT LED 4FT WHITE       FIXTURE LOWPROF RD 22/32W 14IN FIXTURE TROFFER 2LT U31W 2X2FT
SHOPLIGHT LED 4FT WHITE
Our Price: $44.34
LED shop light, 50,000 hour rated life. 28 watts,120 volts, 3100 lumens, 4000K. White housing with white ends and 5 foot white cord and plug. On/off pull chain. With 9-1/2" mounting chains and S hooks. Provides general illumination in residential and light commercial applications. Ideal for use in workshops, utility rooms, and garages. UL listed to US and Canadian safety standards. 46-5/8"L x 3-3/4"W x 2-3/8"H. 2 pounds. Decorative light fixture all white. Acrylic housing material. 2 light, electronic ballast. 22/32W Circline. High performance static T8 fixture for recessed applications. Suitable for damp locations. Uses 2 bulbs, 31 watts, 24". UL Listed.
Acuity 211H2M High Output Strip Light LIGHT SHOP LED 3200LUMEN      STRIP LIGHT 2FT LED 20W 4000K
Rugged steel chassis with baked white enamel finishing. Flush, stem or row mounting. Can be hung individually or in continuous runs. 20 degree Fahrenheit starting temperature. 4-1/4" width x 3" depth. Lamps not included. Designed to be used anywhere a traditional fluorescent fixture is used. 3200 lumens, powered by 5? AWG cord 18/2, 40,000 hours of LED life. (2) 12 inch mounting chains and (2) hooks, on/off pull chain. 40 watts, 80 CRI, 4000K, 120 degree beam width. Non-Linkable, Long LED life, Lightweight and Powerful Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified.
LIGHT STRIP 4FT LINK LED 20W  SHOP LIGHT 3FT LED 42W 3200LMN Acuity 256441 Tandem Fluorescent Strip
Designed to be used anywhere a traditional fluorescent fixture is used. UV, IR and Mercury-free. Linkable LED shop light, 4000K. Rated 50,000 hours. Energy Star. UL/cUL Listed for damp locations. Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified. Two 48" fixtures in tandem using two medium bi-pin bulbs each. Flush, stem or row mounting, rugged steel chassis with baked white enamel finish. Uses four 32 watt T-8 lamps, not included. UL Listed for damp locations.
Louisville FS4006 Commercial Step Ladder Werner 5906 Single Sided Step Ladder Acuity 256439 Narrow Wrap Fluorescent Fixture
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Low profile, narrow wrap light fixture, 2 light, 32 watt. White steel housing and clear prismatic diffuser with white metal ends. Diffuser hinges from either side for easy mounting. Uses 2 each F32  T8 lamps (not included). Energy star qualified, meets new energy legislation requirements. 48-1/4" x 7-9/16" x 3".
Werner 5904 Single Sided Step Ladder Louisville FS2004 Commercial Step Ladder Louisville FS4004 Commercial Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA.
Howard FSR84432ASEMV000I Fluorescent Retro Fit Kit SHOPLIGHT HEAVY DUTY GRID 4LT Acuity 199YWJ Fluorescent Strip Light Fixture
Fluorescent strip channel retrofit kit to upgrade an existing 8? strip fixture into a newer and more efficient electronic T8 strip. Uses two (2) 4? gear trays that install independently for easy installation. Lampholder cutouts guarantee correct spacing and that lampholder will not fall out during install. Code gauge steel. High gloss, baked enamel finish. NEC compliant luminaire power disconnect standard. Contents: 2 gear trays with fully wired high efficiency instant start T8 ballast and lampholders, 12 tek screws, 4 gear tray tethers. Electronic ballast, inherent thermal protection, class P. 8' length, 4.25" width, uses 4 lamps, not included. 120-277 input volts. UL Listed. For residential and light commercial applications. Steel wireguard helps provide protection for the bulb. Fully assembled, ready-to-install. Includes a 5' power cord, 5A maximum convenience outlet and a pull chain power switch. The residential electronic ballast (120V 60Hz 1.50 Amps) starts reliably down to 0 degrees F. Mount to ceiling using the 12" mounting chains, included. Uses (4) 32W linear T8 fluorescent lamps, (not included). All mounting hardware is included. For use on non-dimmable switches only. CUL listed to US and Canadian safety standards and suitable for damp locations. Energy Star certified. White double striplite. Uses two 59 watt bulbs, not included. UL Listed.
FIXTURE TROFFER 4LIGHT 2FTX4FT Werner 6000 Step Ladder Acuity 111AFH Strip Light
For use with T8 lamps, electronic ballasts and sockets. Smooth hemmed sides and inward formed end flanges for safe handling. Lighter weight fixture. Standard steel door frame with precision flush mitered corners, allows easy lens replacement without frame disassembly (for lenses up to .156" thick). Powder-painted, steel latches. Mechanical light seal requires no foam gasketing. Integral T-bar clips secure fixture to T-bar system. Housing formed from cold-rolled steel. Acrylic shielding material UV stabilized. No asbestos is used in this product. Suitable for damp locations. UL Listed. Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Fixture can be mounted individually or in continuous rows for surface or suspended mounting. Applications include light commercial, industrial, retail, coves and displays. Heavy-duty channel is die-formed from 22-gauge steel. Channel cover snaps to housing for easy access to wire way. Electrical connections are made inside the wire way. Standard mounting holes and wiring knockouts are included. Housing is finished in lighting grade white baked gloss enamel paint. No diffuser, fluorescent lamp is exposed. For use with 59 watt, 96" T8 slimline linear lamps. The fixture is cULus listed for damp locations.
LIGHT SHOP LINK 4000K 4FT 35W Werner 6004 Single Sided Step Ladder Louisville FS2006 Commercial Step Ladder
Replaces most applications using 2-light T8 fluorescent lamps. 4000K. UL/cUL Damp Locations, UV, IR and Mercury-free. Energy Star Certified. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
RETROFIT LED KIT WITH TUBES   STRIP LIGHT 4FT LED 40W 4000K FIXTURE WRP4LT 32W 4FT OAK END
Replacement for an older T12 or T8 8 foot strip light. Kit contains 4-4 foot LED tubes, 8 non shunted sockets and 1 metal retrofit kit. Integral driver bypasses the ballast. 15 watts per LED tube - (60 watts total). 120-277 volt, 1800 lumens per LED tube - (7200 lumens total), 5000K. Instant start down to -4 degreesF. 50,000 hours rated life. DLC and cUL certified. Used where traditionally a fluorescent fixture would be used such as garages, sheds, out buildings, utility rooms, workshops and closets. 120-277 volt, 4000K bright white light. Instant start down to -4 degrees F. 50,000 rated life. Energy Star and cUL Certified. Uses a residential electronic ballast (120 volt, 60Hz) for instant on, ensures no flickering and quiet operation without interfering with other home electronics. For use with non-dimmable switches only.
Werner 6005 Single Sided Step Ladder Louisville FS1504 Extra Step Ladder Acuity 987213 Wrap Around Fluorescent Fixture
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Economical low profile with a narrow wrap. Clear prismatic diffuser. Diffuser hinges from either side for easy mounting. Stem, continuous or individual mounting. 48-1/4" x 13" x 3".
Louisville FS2005 Commercial Step Ladder Werner 6006 Single Sided Step Ladder SHOPLIGHT 40IN LED50W BLUTOOTH
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Bluetooth speaker enhanced LED shoplight comes with 2 speakers and chain packet to suspend. For workshops, hobby rooms, basements, sheds, garages or anywhere additional light is needed. Bluetooth speakers pair with IPhone and Android smart phones. Speakers have a 30 foot range. 35 watts, 120 volt, 3200 lumens, 4000K, 50,000 hours rated life. Instant start down to -4 degreesF. Energy Star and cUL certified.
FIXTURE 4L 32W SQ BSKTWRAP 4FT DeWalt DXL3010-04 Step Ladder LIGHT LED VAPRTIGHT4FT 3600LMS
Uses 4-32 watt lamps, 120-277 volt. For surface or stem mounting, individual or row installation. Linear side prisms control brightness, pyramidal bottom prisms minimize lamp image. Diffuser hinges open from either side for easy maintenance. Full depth, white enamel end plates. Die-formed from code-gauge cold-rolled steel. Channel cover snaps into place without the use of tools. Diffuser is extruded clear acrylic. Five-stage iron-phosphate pretreatment. Finished with high-gloss, baked white enamel. Thermally protected, suitable for damp locations. AWM, TFN or THHN wire used throughout. UL and C-UL Listed. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Multi-volt LED fixture, has a high impact poly-carbonate diffuser. 43 watts, 120-277 volts, 3600 lumens, 4000K, 86CRI. 50,000 hours rated lifetime. UL/cUL Wet Locations, IP65 Rated. Energy Star. 47.7" Length x 4.57" Width x 2.91" Height.
Louisville FS1506 Extra Step Ladder Werner 6200 Single Sided Step Ladder LADDER IA FBRGLS CRSS-STEP 4FT
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
DeWalt DXL3110-06 Step Ladder Louisville AE2000 1-Section Straight Extension Ladder Louisville FS1505 Extra Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6200 Single Sided Step Ladder Louisville FS4008 Commercial Step Ladder FIXTURE FLUO OVAL CIRC 2-32WT9
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Residential and light commercial applications. White glass diffuser for a widespread uniform illumination. Center finial provides easy access for cleaning and maintenance. Includes (1) 55W 2C T6 2700K fluorescent lamp. Standard with 120V residential electronic ballast, 60HZ. No flickering and quiet operation without interfering with other home electronics. CUL listed to US and Canadian safety standards and suitable for damp locations.
Louisville AE2000 1-Section Straight Extension Ladder LITEPUFF FLUSHMNT 2LT 32W1X4FT LIGHT STRIP 8FT T8 HIGH OUTPUT
Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width. Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed. For unit or row installations, surface or suspended mounting. Thermally protected, resetting. Heavy-duty channel, die-formed from code-gauge steel. Channel cover secured by captive quarter-turn latch. Five-stage iron phosphate pretreatment ensures superior paint adhesion and rust resistance. Painted parts finished with high-gloss, baked white enamel. UL listed to US and Canadian safety standards. Damp location listed, listed for 25 degree C ambient temperature.
Werner 6206 Single Sided Step Ladder DeWalt DXL3010-06 Step Ladder LADDER IA FBRGLS CRSS-STEP 6FT
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Louisville FS2008 Commercial Step Ladder Werner 5908 Single Sided Step Ladder Werner 6200 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
DeWalt DXL3110-08 Step Ladder Werner 7306 Single Sided Step Ladder Louisville FS1508 Extra Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
LITEPUFF FLUSH 4LT 32W 1.5X4FT LADDER PRO PLATFORM FG 3 FT   Werner Old Blue Single Sided Step Ladder
Low-profile, linear fixture with durable white acrylic diffuser. Thermal formed diffuser. One piece contemporary design wraps around the diffuser to soften the appearance. Surface-mount residential and light commercial applications. All mounting hardware included. CUL Listed. Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?. Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
DeWalt DXL3010-08 Step Ladder Werner PD6203 Podium Ladder LADDER PRO PLATFORM FG 4 FT
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?.
Werner T6006 Twin Ladder Louisville FM1500 Twin Step Ladder LADDER IA FBRGLS CRSS-STEP 8FT
Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 6208 Single Sided Step Ladder Werner 7406 Extra Step Ladder Werner T6206 Twin Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe.
Werner Old Blue Single Sided Step Ladder Werner 7308 Single Sided Step Ladder Louisville FP1500 Platform Step Ladder
Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Non-conductive. Includes DA BOOT and top rail guard. Thick non-marring thermoplastic elastomer tread is bonded and mechanically fastened to the upper boot and provides a slip resistant footing. Slip resistant platform. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. 20-1/2 x 16" platform.
Louisville FT1000 Tripod Ladder Werner P6206 Platform Ladder Werner PD6204 Podium Ladder
Non-conductive. Includes steel reinforced outrigger, center-pull spreader brace, outrigger rail brackets, double-rivet step construction, heavy duty steel gusset bracing and full metal boot. Meets  or exceeds the safety standards set by ANSI and OSHA. 3" steps. Dimensions: 14" x 6-1/2" top, 3-1/8" x 1-1/8" front rails, 1-1/2" square. Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced
DeWalt DXL3810-06 Step Ladder Werner T7406 Multi-Use Twin Step Ladder Werner PD6206 Podium Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced
Werner 7408 Extra Step Ladder Louisville FM1500 Twin Step Ladder Werner T6008 Twin Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide.
Werner T6208 Twin Ladder Werner P6208 Platform Ladder Louisville FS1510 Extra Step Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6210 Single Sided Step Ladder Werner 6212 Single Sided Step Ladder DeWalt DXL3010-10 Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
LADDER IA FBRGLS CRS-STEP 10FT Werner 7410 Extra Step Ladder DeWalt DXL3810-08 Step Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area.
Werner T7408 Multi-Use Twin Step Ladder Louisville FS1512 Extra Step Ladder LADDER IA FBRGLS CRS-STEP 12FT
Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
   
 
1