Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > PROPANE LIGHTING
Choose a sub category:
STEP - WOOD STEP - WOOD STEP - ALUMINUM
STEP - ALUMINUM STEP - FIBERGLASS STEP - FIBERGLASS
UTILITY/FOLDING STEP STOOLS UTILITY/FOLDING STEP STOOLS STRAIGHT LADDERS
STRAIGHT LADDERS EXTENSION - ALUMINUM EXTENSION - ALUMINUM
EXTENSION - FIBERGLASS EXTENSION - FIBERGLASS PLATFORM LADDERS-ALUMINUM
PLATFORM LADDERS-ALUMINUM PLATFORM LADDERS-FIBERGLASS PLATFORM LADDERS-FIBERGLASS
COMBINATION/ MULTI LADDERS COMBINATION/ MULTI LADDERS PLATFORM & SCAFFOLDING
PLATFORM & SCAFFOLDING LADDER ACCESSORIES LADDER ACCESSORIES
Sort By:
1
Arrow Hart 732-BOX Weatherproof Lampholder Cooper BP942 Push Thru Interior Lampholder Cooper 3925-BOX Interior Lampholder
Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts.  Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements. Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925.
Arrow Hart 968-BOX Keyless Fixture Socket Cooper 2982-BOX Interior Lampholder Eagle 926-BOX 3-Way Turn Knob Lampholder
Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. Molded of heat and impact-resistant urea. 250 watts, 250 volts.  Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized. Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified.
Jandorf 60470 Lamp Socket With 1-11/16 in Hickey Jandorf 60471 Lamp Socket With 3-13/16 in Double Leg Hickey Jandorf 60472 Lamp Socket With 2-15/16 in Double Leg Hickey
Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts.
Arrow Hart 145-BOX Weatherproof Pigtail Lampholder Cooper 975ABD-BOX Keyless Lampholder Arrow Hart S752WSP Keyless Cleat Socket
For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements.
Jandorf 60537 Snap-In Lamp Socket With L Hickey Cooper BP940ABD Push Thru Metal Lampholder Arrow Hart BP968 Keyless Fixture Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements.
Jandorf 60474 Lamp Socket With Double Leg Hickey Cooper 917ABD-BOX Turn Knob Lampholder Jandorf 60540 Snap-In Single Spring Lamp Socket
Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. With 6", 18 awg wire leads. 660 watts, 250 volts.
Jandorf 60543 Snap-In Single Spring Lamp Socket With 3/4 in Wire Leads Cooper 925ABD-BOX 3-Way Turn Knob Lampholder Cooper 1198-BOX Bottom Turn Knob Lampholder with Removable Knob
With 6", 18 awg wire leads. 660 watts, 250 volts. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements.
Cooper 940ABD-BOX 3-Way Push Thru Socket Jandorf 60538 Snap-In Lamp Socket Jandorf 60539 Lamp Socket
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. With 6", 18 awg wire leads. 660 watts, 250 volts. With 6", 18 awg wire leads. 660 watts, 250 volts.
Arrow Hart 609-BOX Keyless Lampholder Cooper BP925ABD Lampholder Cooper 980ABD-BOX 3-Way Pull Chain Socket
High-strength insulator porcelain. Thermoset ring. 2 piece with 9" wire leads, medium base, keyless switch. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60541 Double Spring Clip Snap-In Lamp Socket Jandorf 60473 Lamp Socket With 1-7/32 in Ring Jandorf 60406 Keyless Lamp Socket
With 6", 18 awg wire leads. 660 watts, 250 volts. Molded of thermoset plastic. 75 watts, 125 volts. Fit standard lamp stems.
Jandorf 60407 On/Off Push Through Lamp Socket Westinghouse 7040700 Keyless Socket Cooper BP145 Lampholder
Fit standard lamp stems. Medium base. Threaded 1/8 hickey IP. 250 volts, 660 watts maximum. UL Listed. For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed.
Arrow Hart 969-BOX Keyless Fixture Socket Jandorf 60475 Lamp Socket With Spring Clip Cooper BP980ABD Push Thru Metal Lampholder
Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 0.44" bracket height, 1.88" overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs. Molded of thermoset plastic. 75 watts, 125 volts. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Cooper BP917ABD Lampholder Jandorf 60563 Lamp Socket Jandorf 60535 On/Off Push Through Lamp Socket
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Wire leads, 75 watts, 125 volts. Molded of thermoset plastic.
Jandorf 60530 On/Off Turn Knob Lamp Socket Cooper BP1198 Bottom Turn Knob Lampholder Jandorf 60400 Keyless Lamp Socket
Molded of thermoset plastic. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Fit standard lamp stems.
Jandorf 60401 On/Off Push Through Lamp Socket Jandorf 60408 On/Off Turn Knob Lamp Socket Jandorf 60402 On/Off Turn Knob Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Jandorf 60409 3-Way Turn Knob Lamp Socket Mr Heater 20381 Burner Head Jandorf 60410 On/Off Pull Chain Lamp Socket
Fit standard lamp stems. For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle. Fit standard lamp stems.
Jandorf 60545 On/Off Turn Knob Lamp Socket Jandorf 60403 3-Way Turn Knob Lamp Socket Jandorf 60582 3-Way Keyless Lamp Socket
Molded of thermoset plastic. Fit standard lamp stems. Jandorf Lamp Socket, Keyless, Series: 60582, 660 W Lamp, 250 V, Medium Base, Porcelain, Ivory, Matte, UL Listed, For Light Commercial and Residential Applications?
Jandorf 60518 Lampholder Fixture Socket American Tack 6009B Incandescent Dimm Jandorf 60229 Keyless Replacement Lamp Socket With 1/8 in IPT Hickey
Wire leads, 6" long. Converts any lamp to full range dimming. Range from night light to full brightness. Eliminates the need for expensive 3-way bulbs. Compact size fits most lighting fixtures. Screws in, no wiring required. Works with incandescent bulbs and many dimmable LED bulbs. Manual dimmer. 100 watts maximum. Plastic housing. 2.5" x 2.08" x 1.96". Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60533 3-Way Turn Knob Lamp Socket Jandorf 60565 Lamp Socket With 6 in Wire Leads Jandorf 60576 2-Piece Ring Keyless Fixture Socket
Molded of thermoset plastic. Wire leads, 75 watts, 125 volts. Jandorf Fixture Socket, 2-Piece Ring Keyless, Series: 60576, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, White, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting
Jandorf 60404 On/Off Pull Chain Lamp Socket Jandorf 60536 On/Off Bottom Turn Knob Lamp Socket Jandorf 60577 Lamp Socket With 8 in Wire Leads
Fit standard lamp stems. Molded of thermoset plastic. Jandorf Lamp Socket, Series: 60577, 660 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Jandorf 60534 On/Off Pull Chain Lamp Socket American Tack 6603BC Incand Dimmers Jandorf 60228 Keyless Lamp Socket With 1/8 in IPT Hickey
Molded of thermoset plastic. Lamp socket 3-Level dimmer. Converts any lamp with metal socket to a touch dimmer. Use regular bulb instead of 3-way bulb. Works with incandescent bulbs and many dimmable LED bulbs. 150 watts maximum. Plastic housing. 3.4" x 2.4" x 2.4". Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60411 3-Way Pull Chain Lamp Socket Jandorf 60575 2-Piece Ring Fixture Socket Jandorf 60579 Lamp Socket With Side Outlet
Fit standard lamp stems. Jandorf Fixture Socket, 2-Piece Ring, Series: 60575, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, Ivory, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting Jandorf Lamp Socket, Series: 60579, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Jandorf 60580 Lamp Socket With Single Bushing Strap Jandorf 60223 Twin Cluster Ceiling Fixture Kit Jandorf 60405 3-Way Pull Chain Lamp Socket
Jandorf Lamp Socket, Series: 60580, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18AWG pre-wired 8" insulated leads, rated 250 volts for use with 2 light bulbs, 50 watt maximum, 4" offset crossbar, two 8-32 x 1/2" mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish. Fit standard lamp stems.
Jandorf 60520 Lampholder Fixture Socket Jandorf 60517 Lampholder Fixture Socket Mr. Heater F220351 Preformed Mantle
Wire leads, 6" long. Wire leads, 6" long. Replaces broken preformed mantles, or can be used with ceramic burner head 20338 and gasket 20339 to convert light from soft mantle to preformed mantle. Fits Paulin gas lights.
American Tack 4010W Incand/Halogen Dimmer Jandorf 60578 Bottom Turn Knob Lamp Socket Cl Credenza Table Lamp Dimmer
Converts any lamp to full range dimming. For incandescent, halogen and many dimmable LED bulbs. LED locator light. 6 foot power cord. Non-skid, non-mar base. 300 watts maximum, Plastic housing. 4.6" x 2.35" x 2" Jandorf Lamp Socket, Bottom Turn Knob, Series: 60578, 250 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified For use with table, floor, or hanging lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Requires no wiring, just plug-in. 120 volt, 60 Hz. UL Listed. 300 watt maximum incandescent or halogen.
Jandorf 60532 3-Way Pull Chain Lamp Socket Westinghouse 7080100 Lamp Dimmer American Tack 6004B Incandescent Dimmers
Molded of thermoset plastic. For torchiere lamps. Knob included. 120 VAC. 500 watt maximum. Space saving design allows for surrounding outlets to be used. Converts any lamp with metal to a 3-level touch dimmer. Touch any metal part of the lamp including the harp to select light level. Use regular incandescent and LED bulbs instead of expensive 3-way bulbs. Works with incandescent bulbs and many dimmable LED bulbs. 200 watts maximum. Plastic housing. Plug-In connection, plug lamp into dimmer and dimmer into outlet. 1.73" x 2.6" x 1.36".
DIMMER CFL/LED LAMP SLIDE WHT Eagle 942-BOX Push Thru Interior Lampholder Louisville AS3000 Step Ladder
For use with table and floor lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Utilizes HED Technology, which features advanced dimming circuitry that is designed for compatibility with most dimmable CFL and LED bulbs. Single-pole lamp dimmer. 100 watt CFL/LED. Requires no wiring, just plug-in. 120 volt. Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. Slip resistant. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Large structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide.
Werner 150B Step Ladder Louisville AS2100 Step Ladder Werner 354 Single Sided Step Ladder With Pail Shelf
Black molded plastic top provides large 6" wide x 12-3/8" long standing platform. Traction-Tred slip resistant full-sized steps. Pinch-Proof spreaders. Bottom step has double braces. Blue molded vinyl foot pads rivets to side rails. U.L. Listed. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3" Wide; Rear Rails 1-1/8"  Wide; Top 6" x 12-3/8"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards.
Louisville AS4004 Step Ladder Cooper 610-BOX Sign Receptacle Louisville AS4005 Step Ladder
Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Two piece with screw terminals. High strength insulator porcelain. For use in signs, fixtures, decorative lighting and similar applications. 660 watts. 250 volt. Meets all UL 496 requirements. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide.
Werner 356 Single Sided Step Ladder With Pail Shelf Werner 363 Single Sided Step Ladder With Pail Shelf Werner 355 Single Sided Step Ladder With Pail Shelf
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards.
Louisville AS4006 Step Ladder Werner 360 Single Sided Step Ladder With Pail Shelf Louisville AY8000 Extra Step Stand
Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Large structural molded top measures 14" wide by 9-1/4" deep. Diamond tread for a slip-resistant platform. Each step secured with six, large headed, semi-tubular steel rivets. Heavy duty steel gussets to support bottom step. Steps are 6" wide. Meets or exceeds the safety standards set by ANSI and OSHA.
Werner 366 Single Sided Step Ladder With Pail Shelf Louisville AS2100 Step Ladder SAWHORSE TYPE IA 2FT
SAWHORSE TYPE IA 2FT
Our Price: $77.35
Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 374 Single Sided Step Ladder With Pail Shelf Louisville AS2100 Step Ladder Werner 368 Single Sided Step Ladder With Pail Shelf
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps.
Louisville L-2321 Extension Ladder Louisville AS4008 Step Ladder Werner D716-2 Multi-Section Extension Ladder
Mar-resistant impact caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. D-shaped rungs. Fixed runglock. Slip-resistant feet. Dimensions: Side Rails 2.5" wide; .75" Rail Flange; 1.23" Rung; Base outside width 16"; Fly outside width 16". Meets or exceeds the safety standards set by ANSI and OSHA. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder SAWHORSE TYPE IA 3FT          Werner 376 Single Sided Step Ladder With Pail Shelf
SAWHORSE TYPE IA 3FT
Our Price: $98.22
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner D1116-2 Multi-Section Extension Ladder Werner TW373-30 Work Step Ladder Werner D1120-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. External pinch-proof spreaders for easy opening and closing. Double angle bracing on all steps. Mar-resistant feet for slip-resistance on concrete, wood and vinyl floors. Double top steps provide wide platform. Slip-resistant Traction-Tred Steps on front and rear section. Extra wide for versatile use as work stand, stage or material support. Lightweight and portable. Heavy steel hinges. Dimensions: top 8" x 30", 3" wide rails, 3" wide steps and 7/8" wide flange. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
SAWHORSE TYPE IA 4FT          Louisville L-2324 Extension Ladder Werner 406 Single Sided Step Ladder
SAWHORSE TYPE IA 4FT
Our Price: $125.58
This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental.
Werner 378 Single Sided Step Ladder With Pail Shelf Louisville AE4216PG 2-Section Extension Ladder Werner 370 Single Sided Step Ladder With Pail Shelf
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder Werner D1220-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder
Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley.
Louisville AE4220PG 2-Section Extension Ladder Werner D1124-2 Multi-Section Extension Ladder Werner D1516-2 Multi-Section Extension Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner 408 Single Sided Step Ladder Louisville AS3000 Step Ladder Werner D1320-2 Multi-Section Extension Ladder
Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Structural molded top with recessed tray. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder Louisville AE4224PG 2-Section Extension Ladder Werner D1224-2 Multi-Section Extension Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1520-2 Multi-Section Extension Ladder Werner D1128-2 Multi-Section Extension Ladder Louisville AE4228PG 2-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D1228-2 Multi-Section Extension Ladder Werner 410 Single Sided Step Ladder Werner D1324-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1524-2 Multi-Section Extension Ladder The Equalizer D1800-2 Multi-Section Extension Ladder Werner D1328-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Eliminates uneven ground. Easy to use, adjust 3/8" increments up to 8-1/4". Convenient, built in bubble level. Dual action foot for use on hard or penetrable surfaces. Lightweight aluminum. Exclusive Alflo Twist-Proof performance. Slip-resistant steps and rugged locks. Reaches areas of the home that traditional ladders cannot. Dimensions: rails 3-5/16" wide, rungs 1-1/2", base widths 17-3/4" outside shoes, flange 1-3/16" wide and fly width 15-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1232-2 Multi-Section Extension Ladder Werner D1528-2 Multi-Section Extension Ladder Werner 412 Single Sided Step Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental.
Louisville AE4232PG 2-Section Extension Ladder Werner D1332-2 Multi-Section Extension Ladder Werner D1532-2 Multi-Section Extension Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner D1240-2 Multi-Section Extension Ladder Werner D1340-2 Multi-Section Extension Ladder Werner D1540-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
   
 
1