Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > LED CEILING FIXTURES
Sort By:
1
Orrco 60170 Hex Nut Jandorf 60204 Flat Crossbar Jandorf 60230 Lamp Lock-Up Cap
Holds connecting parts in place. Crossbar for mounting light fixtures. Tapped 1/8" IP.
Jandorf 60203 Offset Crossbar Kit Arrow Hart 732-BOX Weatherproof Lampholder Jandorf 60144 Lamp Coupling
Crossbar for mounting light fixtures. Insulation displacement terminals for standard wire. Lay-in wire channel, 1/4" turn twist top speeds installation. One piece terminals and contacts.  Wire range 18 to 12. Sockets are made of heat-resistant phenolic. Hook mounting. 660 watts. 250 volt. Meets all UL 496 requirements. Decorative piece that connects nipples of different sizes together.
Jandorf 60232 Lamp Lock-Up Cap Jandorf 60162 Lamp Nipple Jandorf 60234 Lamp Lockup Kit
Tapped 1/8" IP. For repairing or making lighting fixtures and lamps. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white.
Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial Jandorf 60163 Lamp Nipple
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp. For repairing or making lighting fixtures and lamps.
Jandorf 60231 Lamp Lock-Up Cap Jandorf 60145 Reducer Jandorf 60141 Assorted Lamp Screw
Tapped 1/8" IP. Connects nipples of different sizes. Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated.
3M 7414 Stripping Pad Jandorf 94991 Beaded Chain With NO 6 Connector Jandorf 94992 Beaded Chain With NO 6 Connector
For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. With connector. With connector.
Jandorf 94993 Beaded Chain With NO 6 Connector Jandorf 60146 Reducer Jandorf 60354 Chain Connector
With connector. Connects nipples of different sizes. Links together two beaded chains.
Jandorf 60358 Chain Connector Jandorf 60226 Candelabra Base Socket Cover Jandorf 94995 Beaded Chain With NO 10 Connector
Links together two beaded chains. Covers base socket. For use with a maximum 25W bulb. With connector.
Jandorf 60148 Reducer 3M 10111 Stripping Pads 3M 10112 Stripping Pads
Connects nipples of different sizes. Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Replacement pad for No.10110 heavy-duty stripping tool. Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Designed to be flexible for working on contours. Replace and outperform #2 steel wool.
3M 10113 Stripping Pads 3M 10144 Finishing Pad Jandorf 60351 Chain Connector
Effectively removes paint residue without harming wood. Replaces 0-grade steel wool, but will not shred, splinter, or rust like steel wool. Removes bubbles, dust nibs, and other blemishes for a super smooth finish. Replaces 00-grade steel wool, but will not shred or splinter like steel wool. Links together two beaded chains.
Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell Jandorf 60370 Chain Connector
Links together two beaded chains. Decorative attachment for end of beaded chain. Links together two beaded chains.
Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector Jandorf 60375 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60376 Chain Connector Jandorf 60233 Lamp Lock-Up Cap Jandorf 60160 Lamp Nipple
Links together two beaded chains. Tapped 1/8" IP. For repairing or making lighting fixtures and lamps.
Jandorf 60208 Flat Crossbar Jandorf 60227 Standard Base Socket Cover Orrco 60142 Socket Key With 1/2 in Extension
Crossbar for mounting light fixtures. Covers base socket. For use with a maximum 25W bulb. Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M.
Jandorf 60243 Lamp Loop Jandorf 60149 Lamp Coupling Jandorf 60250 Lamp Canopy Ball
Decorative piece used for hanging fixtures. 1/8 IP brass finish. Decorative piece that connects nipples of different sizes together. Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass.
Cooper BP942 Push Thru Interior Lampholder Jandorf 60171 Lamp Nipple Jandorf 60173 Lamp Nipple
Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. For repairing or making lighting fixtures and lamps. For repairing or making lighting fixtures and lamps.
Jandorf 60100 Spindle Finial Jandorf 60147 Reducer Jandorf 60360 Pull Chain Bell
Secures lamp shade to harp. Connects nipples of different sizes. Decorative attachment for end of beaded chain.
Jandorf 60237 Ceiling Hickey Jandorf 60238 Ceiling Hickey Jandorf 60205 Offset Swivel Crossbar
Used for mounting drop fixtures. Used for mounting drop fixtures. Crossbar for mounting light fixtures.
Orrco 60167 Hex Nut 3M 7415 Stripping Pad 3M 7413 Stripping Pad
Holds connecting parts in place. For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool.
Jandorf 60150 Lamp Coupling Norton 48147 Hand Pad Norton 48148 Hand Pad
Decorative piece that connects nipples of different sizes together. For heavy duty removal of coatings with chemical strippers. Won't rust, shred or splinter. Removes light rust and corrosion. Cleans and brightens metal. Won't rust, shred or splinter.
Norton 48146 Hand Pad Jandorf 60164 Lamp Nipple Orrco 60143 Socket Knob With 1/2 in Extension
For sanding between coats of stain, sealer or varnish on wood surfaces. Won't rust, shred or splinter. For repairing or making lighting fixtures and lamps. Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish.
Jandorf 60151 Reducer Jandorf 60161 Lamp Nipple Jandorf 60240 Ceiling Hickey
Connects nipples of different sizes. For repairing or making lighting fixtures and lamps. Used for mounting drop fixtures.
Jandorf 60241 Ceiling Hickey Orrco 60201 Ceiling Crossbar Kit Cooper 3925-BOX Interior Lampholder
Used for mounting drop fixtures. Crossbar for mounting light fixtures. Molded of heat and impact resistant urea. 250 watt, 250 volt. Interiors UL component recognized. Fits catalog number 925.
Gator 7320 Multi-Surface Metal Finishing Pad Arrow Hart 968-BOX Keyless Fixture Socket Gator 7318 Multi-Surface Cleaning and Stripping Pad
For removing minor blemishes between coat sanding of paint, varnish and polishing metal surfaces. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. For stripping paint and varnish, cleaning pots, pans, grills and household surfaces. Can be used with chemical strippers and cleaners.
Jandorf 60174 Lamp Nipple Orrco 60169 Hex Nut Jandorf 60239 Ceiling Hickey
For repairing or making lighting fixtures and lamps. Holds connecting parts in place. Used for mounting drop fixtures.
Cooper 2982-BOX Interior Lampholder Eagle 926-BOX 3-Way Turn Knob Lampholder Jandorf 60361 Beaded Chain With NO 6 Connector
Molded of heat and impact-resistant urea. 250 watts, 250 volts.  Aluminum, brass dipped finish. Fits catalog number 980. Interiors are UL component recognized. Medium base 250 watt 250 volt. Screw terminals are backed out ready for wiring. Interiors have removable turn knobs. 1/2" bracket height. 2-1/4" overall height. Temperature rating: -40 to 65 degrees C. UL Listed, CSA and NOM certified. With connector.
Jandorf 60110 Tapped Top Hat Lamp Finial Jandorf 60209 Flat Crossbar With Nipple Jandorf 60470 Lamp Socket With 1-11/16 in Hickey
Secures lamp shade to harp. Crossbar for mounting light fixtures. Molded of thermoset plastic. 75 watts, 125 volts.
Jandorf 60471 Lamp Socket With 3-13/16 in Double Leg Hickey Jandorf 60472 Lamp Socket With 2-15/16 in Double Leg Hickey Arrow Hart 145-BOX Weatherproof Pigtail Lampholder
Molded of thermoset plastic. 75 watts, 125 volts. Molded of thermoset plastic. 75 watts, 125 volts. For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed.
Jandorf 60172 Lamp Nipple Jandorf 60102 Tapped Pyramid Finial Cooper 975ABD-BOX Keyless Lampholder
For repairing or making lighting fixtures and lamps. Secures lamp shade to harp. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60175 Lamp Nipple Arrow Hart S752WSP Keyless Cleat Socket Jandorf 60101 Spindle Finial
For repairing or making lighting fixtures and lamps. For use with stage lighting and similar applications. One piece with front wire screw terminals. 660 watt 250 volt. Meets all UL 496 requirements. Secures lamp shade to harp.
Jandorf 60357 Pull Chain Coupling Jandorf 60359 Pull Chain Coupling Jandorf 60103 Tapped Pyramid Finial
Used to secure beaded chain with a fastener. Used to secure beaded chain with a fastener. Secures lamp shade to harp.
Orrco 60168 Locknut Assortment Jandorf 60356 Pull Chain Coupling Jandorf 60242 Lamp Loop
Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts. Used to secure beaded chain with a fastener. Decorative piece used for hanging fixtures. 1/8 IP brass finish.
Sand Paper? With NO-SLIP GRIP? Backing Jandorf 60106 Tapped Bullet Finial Jandorf 60537 Snap-In Lamp Socket With L Hickey
For leveling and smoothing rough or uneven bare surfaces on any surface. No slip grip backing gives you more control. Secures lamp shade to harp. With 6", 18 awg wire leads. 660 watts, 250 volts.
Sand Paper? With NO-SLIP GRIP? Backing Sand Paper? With NO-SLIP GRIP? Backing Cooper BP940ABD Push Thru Metal Lampholder
For fast stripping of rust, paint, varnish and very rough surfaces using sharp minerals and strong resins that cut fast and last long. The no slip grip backing gives you more control. For sanding between initial coats of paint and clear coats using sharp minerals and strong resins that cut fast and last long. The No Slip Grip backing gives you more control. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60120 Clip-On Lamp Shade Adapter Jandorf 60202 All Purpose Adjustable Crossbar Kit Jandorf 60121 Detachable Lamp Harp
Brass finish. Crossbar for mounting light fixtures. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60107 Tapped Bullet Finial Arrow Hart BP968 Keyless Fixture Socket Jandorf 60474 Lamp Socket With Double Leg Hickey
Secures lamp shade to harp. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 1 amp stems or brackets. 7/16" bracket height. 1-7/8" overall height. 660 watts, 250 volts. Meets all UL 496 requirements. Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60122 Detachable Lamp Harp Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer Jandorf 60140 Lamp Check Ring
Protects bulb from lamp shade and holds lamp shade in place. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1-1/8" M to 1/4-27 F reducer. Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples.
Cooper 917ABD-BOX Turn Knob Lampholder Jandorf 60540 Snap-In Single Spring Lamp Socket Jandorf 60543 Snap-In Single Spring Lamp Socket With 3/4 in Wire Leads
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. With 6", 18 awg wire leads. 660 watts, 250 volts. With 6", 18 awg wire leads. 660 watts, 250 volts.
Cooper 925ABD-BOX 3-Way Turn Knob Lampholder Cooper 1198-BOX Bottom Turn Knob Lampholder with Removable Knob Cooper 940ABD-BOX 3-Way Push Thru Socket
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. Aluminum brass dipped finish. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60538 Snap-In Lamp Socket Jandorf 60539 Lamp Socket Arrow Hart 609-BOX Keyless Lampholder
With 6", 18 awg wire leads. 660 watts, 250 volts. With 6", 18 awg wire leads. 660 watts, 250 volts. High-strength insulator porcelain. Thermoset ring. 2 piece with 9" wire leads, medium base, keyless switch.
Jandorf 60123 Detachable Lamp Harp Cooper BP925ABD Lampholder Cooper 980ABD-BOX 3-Way Pull Chain Socket
Protects bulb from lamp shade and holds lamp shade in place. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 3-Way sockets operate dual filament lamps on sequence of low, medium high and off. Aluminum brass dipped finish. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified.
Jandorf 60541 Double Spring Clip Snap-In Lamp Socket Jandorf 60124 Detachable Lamp Harp Jandorf 60473 Lamp Socket With 1-7/32 in Ring
With 6", 18 awg wire leads. 660 watts, 250 volts. Protects bulb from lamp shade and holds lamp shade in place. Molded of thermoset plastic. 75 watts, 125 volts.
Jandorf 60125 Detachable Lamp Harp Jandorf 60236 Screw Collar Loop Jandorf 60112 Tapped Ball Finial
Protects bulb from lamp shade and holds lamp shade in place. Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP. Secures lamp shade to harp.
Jandorf 60406 Keyless Lamp Socket Jandorf 60407 On/Off Push Through Lamp Socket Westinghouse 7040700 Keyless Socket
Fit standard lamp stems. Fit standard lamp stems. Medium base. Threaded 1/8 hickey IP. 250 volts, 660 watts maximum. UL Listed.
Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector Jandorf 60206 Loop Crossbar Kit
With connector. With connector. Crossbar for mounting light fixtures.
Jandorf 60220 Ceiling Blank-Up Kit Jandorf 60371 Beaded Chain With NO 6 Connector Jandorf 60373 Beaded Chain With NO 6 Connector
Decorative piece used to cover the outlet box after removal of an existing fixture. With connector. With connector.
Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60136 Lamp Cord Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer
With connector. With polarized plug. 18 gauge. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1-1/8" M to 1/4-27 F reducer.
Jandorf 60211 Ceiling Canopy Kit Cooper BP145 Lampholder Arrow Hart 969-BOX Keyless Fixture Socket
Used to cover the outlet box and hang ceiling fixture. 5". For use in electrical equipment, harnesses, light strings. Wire leads are 5", 14 gauge, color-coded and stranded wire, stripped 1". Rubber sockets have an extended lip to seal against bulb. Metal shell interiors are aluminum, nickel-plated copper. 660 watt. UL listed. Screw terminals are backed out. Hickeys and nipples are threaded for mounting on standard fixture, 0.44" bracket height, 1.88" overall height. 660 watt, 250 volt. Temperature rating of -40 to 65 degrees C. Interiors have removable turn knobs.
Jandorf 60475 Lamp Socket With Spring Clip Cooper BP980ABD Push Thru Metal Lampholder 3M 10110 Flat Stripping Tool Pad
Molded of thermoset plastic. 75 watts, 125 volts. Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 660 watts, 250 volts. Temperature rating: -40 degrees C to 65 degrees C. UL Listed, file E7430, UL 496 requirements. NOM Certified. Easy-grip, reusable handle and replaceable pad used with chemical strippers to quickly remove paint, varnishes, and other finishes without harming wood. Designed to keep hands free from chemicals, to allow application of greater pressure for tough jobs, and to absorb residue in the No.10111 replaceable pad.
Cooper BP917ABD Lampholder Jandorf 60118 Lamp Shade Riser Jandorf 60563 Lamp Socket
Caps threaded 1/8"-27 I.P.S. Fit standard lamp stems. Set screw prevents rotation of socket. 250 watts, 250 volts. Temperature rating: -40 to 149 degrees F. UL Listed, file E7430, UL 496 requirements. NOM Certified. Raises lamp shade. 1/4-27 thread. Wire leads, 75 watts, 125 volts.
Gator 7187 Zip Refill Sander Jandorf 60535 On/Off Push Through Lamp Socket Jandorf 60530 On/Off Turn Knob Lamp Socket
For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. Molded of thermoset plastic. Molded of thermoset plastic.
Cooper BP1198 Bottom Turn Knob Lampholder Jandorf 60400 Keyless Lamp Socket Jandorf 60401 On/Off Push Through Lamp Socket
Molded of thermoset plastic. Screw terminals are backed out. 1/8"-27 nipple. 11/16" bracket length, nickel finish.  660 watts, 250 volts. Meets all UL 496 requirements. Fit standard lamp stems. Fit standard lamp stems.
Gator Zip Sander 7221 Multi-Surface Step-3 Refill Sanding Sheet Gator Zip Sander 7202 Multi-Surface Step-1 Refill Sanding Sheet Gator Zip Sander 7206 Multi-Surface Step-2 Refill Sanding Sheet
For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280.
Jandorf 60119 Lamp Shade Riser Jandorf 60408 On/Off Turn Knob Lamp Socket Jandorf 60165 Lamp Pipe
Raises lamp shade. 1/4-27 thread. Fit standard lamp stems. For repairing or making lighting fixtures and lamps.
Jandorf 60402 On/Off Turn Knob Lamp Socket Jandorf 60409 3-Way Turn Knob Lamp Socket Jandorf 60410 On/Off Pull Chain Lamp Socket
Fit standard lamp stems. Fit standard lamp stems. Fit standard lamp stems.
Jandorf 60134 Lamp Cord Jandorf 60135 Lamp Cord Jandorf 60545 On/Off Turn Knob Lamp Socket
With polarized plug. 18 gauge. With polarized plug. 18 gauge. Molded of thermoset plastic.
Jandorf 60403 3-Way Turn Knob Lamp Socket Jandorf 60127 Detachable Lamp Harp Jandorf 60582 3-Way Keyless Lamp Socket
Fit standard lamp stems. Protects bulb from lamp shade and holds lamp shade in place. Jandorf Lamp Socket, Keyless, Series: 60582, 660 W Lamp, 250 V, Medium Base, Porcelain, Ivory, Matte, UL Listed, For Light Commercial and Residential Applications?
Jandorf 60518 Lampholder Fixture Socket American Tack 6009B Incandescent Dimm Jandorf 60138 Lamp Socket/Switch
Wire leads, 6" long. Converts any lamp to full range dimming. Range from night light to full brightness. Eliminates the need for expensive 3-way bulbs. Compact size fits most lighting fixtures. Screws in, no wiring required. Works with incandescent bulbs and many dimmable LED bulbs. Manual dimmer. 100 watts maximum. Plastic housing. 2.5" x 2.08" x 1.96". Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum.
Jandorf 60218 Ceiling Blank-Up Kit Jandorf 60229 Keyless Replacement Lamp Socket With 1/8 in IPT Hickey Jandorf 60128 Detachable Lamp Harp
Decorative piece used to cover the outlet box after removal of an existing fixture. Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60533 3-Way Turn Knob Lamp Socket Jandorf 60565 Lamp Socket With 6 in Wire Leads Jandorf 60576 2-Piece Ring Keyless Fixture Socket
Molded of thermoset plastic. Wire leads, 75 watts, 125 volts. Jandorf Fixture Socket, 2-Piece Ring Keyless, Series: 60576, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, White, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting
Jandorf 60404 On/Off Pull Chain Lamp Socket Jandorf 60536 On/Off Bottom Turn Knob Lamp Socket Jandorf 60214 Ceiling Canopy Kit
Fit standard lamp stems. Molded of thermoset plastic. Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60215 Ceiling Canopy Kit Jandorf 60216 Ceiling Canopy Kit Jandorf 60133 Lamp Cord
Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5". With polarized plug. 18 gauge.
Jandorf 60212 Ceiling Canopy Kit Jandorf 60577 Lamp Socket With 8 in Wire Leads Jandorf 60219 Ceiling Blank-Up Kit
Used to cover the outlet box and hang ceiling fixture. 5". Jandorf Lamp Socket, Series: 60577, 660 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Decorative piece used to cover the outlet box after removal of an existing fixture.
Jandorf 60534 On/Off Pull Chain Lamp Socket American Tack 6603BC Incand Dimmers Jandorf 60228 Keyless Lamp Socket With 1/8 in IPT Hickey
Molded of thermoset plastic. Lamp socket 3-Level dimmer. Converts any lamp with metal socket to a touch dimmer. Use regular bulb instead of 3-way bulb. Works with incandescent bulbs and many dimmable LED bulbs. 150 watts maximum. Plastic housing. 3.4" x 2.4" x 2.4". Socket for candelabra base bulbs, with 1/8 IP hickey. Rated 75 watt-125 volt. Use only with #16 or #18 AWG stranded copper wire.
Jandorf 60217 Ceiling Canopy Kit Jandorf 60411 3-Way Pull Chain Lamp Socket Jandorf 60575 2-Piece Ring Fixture Socket
Used to cover the outlet box and hang ceiling fixture. 5". Fit standard lamp stems. Jandorf Fixture Socket, 2-Piece Ring, Series: 60575, 660 W Lamp, 250 V, Medium Base, Screw Terminal, Porcelain, Ivory, Matte, UL Listed, For Signs, Fixtures and Decorative Lighting
Jandorf 60213 Ceiling Canopy Kit Jandorf 60579 Lamp Socket With Side Outlet Jandorf 60580 Lamp Socket With Single Bushing Strap
Used to cover the outlet box and hang ceiling fixture. 5". Jandorf Lamp Socket, Series: 60579, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified Jandorf Lamp Socket, Series: 60580, 660 W Lamp, 600 V, Medium Base, Porcelain, White, Matte, UL Listed
Jandorf 60223 Twin Cluster Ceiling Fixture Kit Gator MicroZip Sanding Sheet Refill Jandorf Make A Lamp Lamp Kit
Provides overhead lighting and supports reflector glass. Includes the canopy, two-bulb cluster socket with 18AWG pre-wired 8" insulated leads, rated 250 volts for use with 2 light bulbs, 50 watt maximum, 4" offset crossbar, two 8-32 x 1/2" mounting screws, two 1/8 IP rubber washers and a lock-up cap with brass finish. The "Quick-Change" hook & loop holding system allows faster sheet changes. Contains 10 premium sheets of each, 80, 120, and 220 grits. Use with Sku# 178.7274. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple.
Jandorf 60405 3-Way Pull Chain Lamp Socket Jandorf 60520 Lampholder Fixture Socket Jandorf 60221 Glass Shade Holder
Fit standard lamp stems. Wire leads, 6" long. Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum.
Jandorf 60222 Glass Shade Holder Jandorf 60517 Lampholder Fixture Socket Gator 7186 Multi-Surface Zip Sander
Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum. Wire leads, 6" long. Great for sanding flat surfaces as well as hard-to-reach areas. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly in your hand. Contains 2-220 grit, 2-120 grit and 2-80 grit refill sheets and diamond shape sander.
Jandorf 60132 SPT-1 Lamp Kit With Harp American Tack 4010W Incand/Halogen Dimmer Jandorf 60578 Bottom Turn Knob Lamp Socket
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Converts any lamp to full range dimming. For incandescent, halogen and many dimmable LED bulbs. LED locator light. 6 foot power cord. Non-skid, non-mar base. 300 watts maximum, Plastic housing. 4.6" x 2.35" x 2" Jandorf Lamp Socket, Bottom Turn Knob, Series: 60578, 250 W Lamp, 250 V, Medium Base, Porcelain, White, Matte, UL Listed, CSA Certified
Cl Credenza Table Lamp Dimmer Gator 7800 Micro Zip Sanding Kit Westinghouse 7026800 3-Way Make-A-Lamp Socket Kit
For use with table, floor, or hanging lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Requires no wiring, just plug-in. 120 volt, 60 Hz. UL Listed. 300 watt maximum incandescent or halogen. Small size allows for easy access to tight spots. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly under your index finger. Contains 10-220 grit, 10-120 grit and 10-80 grit refill sheets. Brass plated 10" detachable harp, 18 gauge 8' UL Listed cord set, 3 way socket, finial and hardware. 150 watts maximum.
Jandorf 60532 3-Way Pull Chain Lamp Socket Westinghouse 7080100 Lamp Dimmer American Tack 6004B Incandescent Dimmers
Molded of thermoset plastic. For torchiere lamps. Knob included. 120 VAC. 500 watt maximum. Space saving design allows for surrounding outlets to be used. Converts any lamp with metal to a 3-level touch dimmer. Touch any metal part of the lamp including the harp to select light level. Use regular incandescent and LED bulbs instead of expensive 3-way bulbs. Works with incandescent bulbs and many dimmable LED bulbs. 200 watts maximum. Plastic housing. Plug-In connection, plug lamp into dimmer and dimmer into outlet. 1.73" x 2.6" x 1.36".
Jandorf Make A Lamp SPT-1 Lamp Kit With Harp Westinghouse 0101100 Recessed Light Converter DIMMER CFL/LED LAMP SLIDE WHT
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Transform existing recessed lighting into a pendant or light fixture. Hang any pendant or light fixture of 50 pounds or less where you currently have recessed lighting. Adjusts to any fit can size between 4" and 6". No visible screws or hardware and the decorative medallion can be painted. Works with existing recessed cans that use medium base PAR16, R16, A19, R20, PAR20, BR25, BR30, R30, PAR30, BR38, PAR38, BR40 or R40 light bulbs and is suitable for damp locations. Includes adjustable bar, socket adapter, mounting bar, round metal plate, decorative medallion and hardware. Can be used on sloped ceilings up to 45 degrees.1.46" height x 6" diameter. ETL Listed. For use with table and floor lamps. Slide-to-off feature uses slider to change intensity of light (up to brighten, down to dim) and lights turn off once slider reaches bottom. Utilizes HED Technology, which features advanced dimming circuitry that is designed for compatibility with most dimmable CFL and LED bulbs. Single-pole lamp dimmer. 100 watt CFL/LED. Requires no wiring, just plug-in. 120 volt.
Eagle 942-BOX Push Thru Interior Lampholder Norton 45600 Hand Pad LIGHT LED LOW PRO 7IN 4000K
Molded of heat and impact resistant urea. 660 watts, 250 volts. Fits catalog numbers 940, 941 and 485. Interiors UL component recognized. For heavy duty cleaning and stripping through finishing to light duty polishing. Round LED lamp is used in commercial office, retail, restaurant, school, hospital, multi family, and hotel/motel locations in interior hallways, bedrooms, utility/laundry rooms, living rooms, or recreational rooms. 4000K, 50,000 hours average life. UV, IR and mercury free. UL/cUL Listed for damp locations.
LIGHT CEILING LED 750 LUMEN   Michigan 1100-02 Pine Step Ladder ETI Lighting 54606242 Spin Light Ceiling Fixture
Ceiling light fixture, dimmable, LED, white, installs through use of direct wire. Wrap around top ears for top protection. Outside galvanized steel spreaders. Knee Braces on bottom step. Outside washers. Bottom of front steps fully rodded through slots. Steps spaced evenly - 9" apart. High quality finished rails with eased edges. Rail ends are angle cut for full ground contact. Blind bore back legs with 1 rear rectangular horizontal. Dimensions: Front Rails 25/32" x 2-5/8"; Back legs 25/32" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Steps 3/4" x 3-1/4"; Rear Horizontals 3/4" x 2-1/2". Spin light, used in residential, office, retail, restaurant, school, hospital, and hotel/motel locations in bathrooms, closets, utility rooms, interior hallways or interior stairwells. Can be wall or ceiling mounted. Mounts to all lamp holders. Round, 4,000K, white. UV, IR and mercury free. UL/cUL Listed for damp locations.
LIGHT SPIN LED 4000K W/PULL7IN LIGHT PUFF SQ LED 11.5IN 1100L LIGHT PUFF RND LED 13IN 1500 L