Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > PHOTO CONTROLS AND ACCESSORIES
Choose a sub category:
DIMMABLE 12 VOLT DIMMABLE
Sort By:
1
Orrco 60170 Hex Nut Jandorf 60204 Flat Crossbar Jandorf 60230 Lamp Lock-Up Cap
Holds connecting parts in place. Crossbar for mounting light fixtures. Tapped 1/8" IP.
Jandorf 60203 Offset Crossbar Kit Jandorf 60144 Lamp Coupling Jandorf 60232 Lamp Lock-Up Cap
Crossbar for mounting light fixtures. Decorative piece that connects nipples of different sizes together. Tapped 1/8" IP.
Norton 74700 Hand Pad Norton 74800 Hand Pad Jandorf 60162 Lamp Nipple
For heavy duty cleaning and stripping through finishing to light duty polishing. For heavy duty cleaning and stripping through finishing to light duty polishing. For repairing or making lighting fixtures and lamps.
Jandorf 60234 Lamp Lockup Kit Jandorf 60235 Lamp Lockup Kit Jandorf 60109 Tapped Top Hat Lamp Finial
Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures center mount glass shade to ceiling fixture. Kit contains 1 - 1-1/8" check ring, 1 - lock-up cap 1/8 IP, 1 - 1/8 IP x 1" OD rubber washer white. Secures lamp shade to harp.
Jandorf 60163 Lamp Nipple Jandorf 60231 Lamp Lock-Up Cap Jandorf 60145 Reducer
For repairing or making lighting fixtures and lamps. Tapped 1/8" IP. Connects nipples of different sizes.
Jandorf 60141 Assorted Lamp Screw Jandorf 94991 Beaded Chain With NO 6 Connector Jandorf 94992 Beaded Chain With NO 6 Connector
Used for holding lamp parts in place. Contains 3 each 8/32" x 1/2" knurled head screws - brass plated, 8/32" x 1/2" knurled head screws - nickel plated, and 8/32" x 3/4" knurled head screws - brass plated, and two each of 8/32" x 1" slotted machine screws - brass plated and 8/32" x 2" slotted machine screws - brass plated. With connector. With connector.
Jandorf 94993 Beaded Chain With NO 6 Connector Jandorf 60146 Reducer Jandorf 60354 Chain Connector
With connector. Connects nipples of different sizes. Links together two beaded chains.
3M 7414 Stripping Pad Jandorf 60358 Chain Connector Westinghouse 7077000 Swag Hook Kit
For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. Links together two beaded chains. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Jandorf 60226 Candelabra Base Socket Cover Jandorf 94995 Beaded Chain With NO 10 Connector Jandorf 60148 Reducer
Covers base socket. For use with a maximum 25W bulb. With connector. Connects nipples of different sizes.
Jandorf 60351 Chain Connector Jandorf 60353 Chain Connector Jandorf 60355 Pull Chain Bell
Links together two beaded chains. Links together two beaded chains. Decorative attachment for end of beaded chain.
Jandorf 60370 Chain Connector Jandorf 60372 Chain Connector Jandorf 60374 Chain Connector
Links together two beaded chains. Links together two beaded chains. Links together two beaded chains.
Jandorf 60375 Pull Chain Bell Jandorf 60376 Chain Connector Jandorf 60233 Lamp Lock-Up Cap
Decorative attachment for end of beaded chain. Links together two beaded chains. Tapped 1/8" IP.
Jandorf 60160 Lamp Nipple Jandorf 60208 Flat Crossbar Jandorf 60227 Standard Base Socket Cover
For repairing or making lighting fixtures and lamps. Crossbar for mounting light fixtures. Covers base socket. For use with a maximum 25W bulb.
Orrco 60142 Socket Key With 1/2 in Extension Jandorf 60243 Lamp Loop 3M 10111 Stripping Pads
Turns lamp on and off. Socket keys and 1/2" extensions, 4/36F x 4/36M. Decorative piece used for hanging fixtures. 1/8 IP brass finish. Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Replacement pad for No.10110 heavy-duty stripping tool.
3M 10112 Stripping Pads 3M 10113 Stripping Pads 3M 10144 Finishing Pad
Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Designed to be flexible for working on contours. Replace and outperform #2 steel wool. Effectively removes paint residue without harming wood. Replaces 0-grade steel wool, but will not shred, splinter, or rust like steel wool. Removes bubbles, dust nibs, and other blemishes for a super smooth finish. Replaces 00-grade steel wool, but will not shred or splinter like steel wool.
Westinghouse 7045200 Swag Hook Westinghouse 7045000 Swag Hook Kit Westinghouse 7045100 Swag Hook Kit
Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds. Includes two each: 1-1/2" hooks, spring toggle wings, running thread studs, and wood screw bolts. Supports up to 30 pounds.
Jandorf 60149 Lamp Coupling Jandorf 60250 Lamp Canopy Ball Jandorf 60171 Lamp Nipple
Decorative piece that connects nipples of different sizes together. Secures canopy or blank up to crossbar. 8/32 thread, 3/8" diameter solid brass. For repairing or making lighting fixtures and lamps.
Jandorf 60173 Lamp Nipple Jandorf 60100 Spindle Finial Jandorf 60147 Reducer
For repairing or making lighting fixtures and lamps. Secures lamp shade to harp. Connects nipples of different sizes.
Jandorf 60360 Pull Chain Bell Jandorf 60237 Ceiling Hickey Jandorf 60238 Ceiling Hickey
Decorative attachment for end of beaded chain. Used for mounting drop fixtures. Used for mounting drop fixtures.
Jandorf 60205 Offset Swivel Crossbar Orrco 60167 Hex Nut Jandorf 60150 Lamp Coupling
Crossbar for mounting light fixtures. Holds connecting parts in place. Decorative piece that connects nipples of different sizes together.
Norton 48147 Hand Pad Norton 48146 Hand Pad Jandorf 60164 Lamp Nipple
For heavy duty removal of coatings with chemical strippers. Won't rust, shred or splinter. For sanding between coats of stain, sealer or varnish on wood surfaces. Won't rust, shred or splinter. For repairing or making lighting fixtures and lamps.
Orrco 60143 Socket Knob With 1/2 in Extension Jandorf 60151 Reducer Jandorf 60161 Lamp Nipple
Turns lamp on and off. Includes 2 socket knobs - black, 2 - 1/2" extensions, 4/36F x 4/36M with brass finish. Connects nipples of different sizes. For repairing or making lighting fixtures and lamps.
Jandorf 60240 Ceiling Hickey Jandorf 60241 Ceiling Hickey 3M 7415 Stripping Pad
Used for mounting drop fixtures. Used for mounting drop fixtures. For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool.
3M 7413 Stripping Pad Orrco 60201 Ceiling Crossbar Kit Gator 7320 Multi-Surface Metal Finishing Pad
For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. Crossbar for mounting light fixtures. For removing minor blemishes between coat sanding of paint, varnish and polishing metal surfaces.
Gator 7318 Multi-Surface Cleaning and Stripping Pad Jandorf 60174 Lamp Nipple Orrco 60169 Hex Nut
For stripping paint and varnish, cleaning pots, pans, grills and household surfaces. Can be used with chemical strippers and cleaners. For repairing or making lighting fixtures and lamps. Holds connecting parts in place.
ALI 4019 Drywall Sanding Screen ALI 4008 Drywall Sanding Screen Jandorf 60239 Ceiling Hickey
Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Used for mounting drop fixtures.
Jandorf 60361 Beaded Chain With NO 6 Connector Jandorf 60110 Tapped Top Hat Lamp Finial Jandorf 60209 Flat Crossbar With Nipple
With connector. Secures lamp shade to harp. Crossbar for mounting light fixtures.
Jandorf 60172 Lamp Nipple Jandorf 60102 Tapped Pyramid Finial 3M Sand-Pak Waterproof Sanding Screen
For repairing or making lighting fixtures and lamps. Secures lamp shade to harp. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse.
3M Sand-Pak Waterproof Sanding Screen Jandorf 60175 Lamp Nipple Jandorf 60101 Spindle Finial
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. For repairing or making lighting fixtures and lamps. Secures lamp shade to harp.
Jandorf 60357 Pull Chain Coupling Jandorf 60359 Pull Chain Coupling Jandorf 60103 Tapped Pyramid Finial
Used to secure beaded chain with a fastener. Used to secure beaded chain with a fastener. Secures lamp shade to harp.
Orrco 60168 Locknut Assortment Jandorf 60356 Pull Chain Coupling Jandorf 60242 Lamp Loop
Holds connecting parts in place. Contains two each 1/4-27 knurled locknuts, 1/8 IP knurled locknuts, 1/4 IP knurled locknuts, 8/32 battery nuts and four 1/8 IP hex nuts. Used to secure beaded chain with a fastener. Decorative piece used for hanging fixtures. 1/8 IP brass finish.
Jandorf 60106 Tapped Bullet Finial Saint-Gobain FDW6641-U Fibatape Drywall Sanding Screens Saint-Gobain FDW6642-U Fibatape Drywall Sanding Screens
Secures lamp shade to harp. Reversible, non-clogging, open mesh, precut for quick and easy attachment to FibaTape vacuum drywall sander, impregnated with extra sharp, silicon carbide abrasive for fast and easy work. Coarse 100-grit for trouble-free first coat sanding, fine 150-grit for extra-smooth final finishing. Rinse with cold water for reuse. Reversible, non-clogging, open mesh, precut for quick and easy attachment to FibaTape vacuum drywall sander, impregnated with extra sharp, silicon carbide abrasive for fast and easy work. Coarse 100-grit for trouble-free first coat sanding, fine 150-grit for extra-smooth final finishing. Rinse with cold water for reuse.
Jandorf 60120 Clip-On Lamp Shade Adapter Hyde Tools 09916 Pre-Cut Sanding Screen Sand Paper? With NO-SLIP GRIP? Backing
Brass finish. Designed specifically for use with drywall compound, 45-degree mesh angle offsets typical angle of sanding head in use. Precut to 3-1/4" x 11-1/4". For use with any Hyde pole-sander heads. Also fits Vac-Sanding kits. 2 sheets. For fast stripping of rust, paint, varnish and very rough surfaces using sharp minerals and strong resins that cut fast and last long. The no slip grip backing gives you more control.
Sand Paper? With NO-SLIP GRIP? Backing Jandorf 60202 All Purpose Adjustable Crossbar Kit Jandorf 60121 Detachable Lamp Harp
For sanding between initial coats of paint and clear coats using sharp minerals and strong resins that cut fast and last long. The No Slip Grip backing gives you more control. Crossbar for mounting light fixtures. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60107 Tapped Bullet Finial Jandorf 60122 Detachable Lamp Harp Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer
Secures lamp shade to harp. Protects bulb from lamp shade and holds lamp shade in place. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer.
Jandorf 60140 Lamp Check Ring Westinghouse 7067000 Oval Fixture Chain 3 ft Norton 04171 Drywall Sanding Screen Paper
Decorative highlight to cover opening. Contains 12 assorted check rings for 1/8" IP lamp nipples. Used to hang lighting fixtures, planters, shelving and wind chimes or as drapery tie backs. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging.
Norton 04169 Drywall Sanding Screen Paper Jandorf 60123 Detachable Lamp Harp Jandorf 60124 Detachable Lamp Harp
For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Protects bulb from lamp shade and holds lamp shade in place. Protects bulb from lamp shade and holds lamp shade in place.
Jandorf 60125 Detachable Lamp Harp Jandorf 60236 Screw Collar Loop Jandorf 60112 Tapped Ball Finial
Protects bulb from lamp shade and holds lamp shade in place. Decorative loop that secures 1 1/16" center hole canopy. 1/4 IP. Secures lamp shade to harp.
Jandorf 60324 Beaded Chain With NO 6 Connector Jandorf 60352 Beaded Chain With NO 6 Connector Jandorf 60206 Loop Crossbar Kit
With connector. With connector. Crossbar for mounting light fixtures.
Jandorf 60220 Ceiling Blank-Up Kit Jandorf 60371 Beaded Chain With NO 6 Connector Jandorf 60373 Beaded Chain With NO 6 Connector
Decorative piece used to cover the outlet box after removal of an existing fixture. With connector. With connector.
Jandorf 60377 Beaded Chain With NO 6 Connector Jandorf 60136 Lamp Cord Jandorf Acorn Finial Reducer With 1/8 M to 1/4-27 F Reducer
With connector. With polarized plug. 18 gauge. Secures lamp shade to harp. Contains one 1-1/2" acorn finial with a 1/8" M to 1/4-27 F reducer.
Jandorf 60211 Ceiling Canopy Kit 3M Sand-Pak Die-Cut Waterproof Sanding Screen Jandorf 60118 Lamp Shade Riser
Used to cover the outlet box and hang ceiling fixture. 5". Tough, sharp silicon carbide abrasive cuts fast to sand and contour irregular areas on drywall compounds and plaster; also used on wood, plastic, and painted surfaces. Open mesh design resists loading and allows use of both sides. Rinse to reuse. Trim to fit any sanding block or pole sander. Raises lamp shade. 1/4-27 thread.
3M 10110 Flat Stripping Tool Pad Gator 7187 Zip Refill Sander Osram Sylvania 58650 Tungsten Quartz Single Ended Halogen Lamp
Easy-grip, reusable handle and replaceable pad used with chemical strippers to quickly remove paint, varnishes, and other finishes without harming wood. Designed to keep hands free from chemicals, to allow application of greater pressure for tough jobs, and to absorb residue in the No.10111 replaceable pad. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. Clear finish tungsten halogen bulb. Low pressure, UV-stop and transverse filament. 2,000 average life hours.
Osram Sylvania 58660 Tungsten Quartz Low Pressure Halogen Lamp Osram Sylvania 58655 Tungsten Quartz Low Pressure Halogen Lamp Gator Zip Sander 7221 Multi-Surface Step-3 Refill Sanding Sheet
Clear finish tungsten halogen bulb. Low pressure, UV-stop and transverse filament. 2,000 average life hours. Clear finish tungsten halogen bulb. Low pressure, UV-stop and transverse filament. 2,000 average life hours. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280.
Gator Zip Sander 7202 Multi-Surface Step-1 Refill Sanding Sheet Gator Zip Sander 7206 Multi-Surface Step-2 Refill Sanding Sheet Jandorf 60119 Lamp Shade Riser
For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. Raises lamp shade. 1/4-27 thread.
Jandorf 60165 Lamp Pipe Westinghouse 8133300 Honey Swirl Light Accessory Shade Jandorf 60134 Lamp Cord
For repairing or making lighting fixtures and lamps. Honey swirl scavo shade with wide bell shape. Fitter - 2-1/4", height - 4-3/ 8", diameter - 6-7/ 8". With polarized plug. 18 gauge.
Jandorf 60135 Lamp Cord Jandorf 60127 Detachable Lamp Harp Jandorf 60138 Lamp Socket/Switch
With polarized plug. 18 gauge. Protects bulb from lamp shade and holds lamp shade in place. Lights up crafts and ceramic houses. 6' SPT-1 lamp cord, 18 gauge with on/off switch, candelabra base, clip-in socket and polarized plug. 75 watts maximum.
Jandorf 60218 Ceiling Blank-Up Kit Feit BPQ50/CL/MC Dimmable Halogen Lamp Jandorf 60128 Detachable Lamp Harp
Decorative piece used to cover the outlet box after removal of an existing fixture. Chandelier bulb, compact and dimmable, 2,000 average life hours. 120 volt. Protects bulb from lamp shade and holds lamp shade in place.
Feit BPQ150/CL/MC Dimmable Halogen Lamp Area Lighting CPGI-ALR-LC-120 Photocontrol Jandorf 60214 Ceiling Canopy Kit
Chandelier bulb, compact and dimmable, 2,000 average life hours. 120 volt. Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. Used to cover the outlet box and hang ceiling fixture. 5".
Jandorf 60215 Ceiling Canopy Kit Jandorf 60216 Ceiling Canopy Kit Jandorf 60133 Lamp Cord
Used to cover the outlet box and hang ceiling fixture. 5". Used to cover the outlet box and hang ceiling fixture. 5". With polarized plug. 18 gauge.
Jandorf 60212 Ceiling Canopy Kit Westinghouse 8186900 Light Shade Jandorf 60219 Ceiling Blank-Up Kit
Used to cover the outlet box and hang ceiling fixture. 5". Fitter - 3-1/4", diameter - 6" Decorative piece used to cover the outlet box after removal of an existing fixture.
Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol Jandorf 60217 Ceiling Canopy Kit AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control
Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Used to cover the outlet box and hang ceiling fixture. 5". Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7".
Jandorf 60213 Ceiling Canopy Kit Area Lighting CPGI-ALR-PL-120S Photocontrol Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol
Used to cover the outlet box and hang ceiling fixture. 5". Electrical components polycarbonate. Compact screw-in control for up to 150 watt incandescent, CFL, LED and halogen lamps. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed.
Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol AmerTac 758M Post Eye Light Control Gator MicroZip Sanding Sheet Refill
Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt. The "Quick-Change" hook & loop holding system allows faster sheet changes. Contains 10 premium sheets of each, 80, 120, and 220 grits. Use with Sku# 178.7274.
AmerTac OLC5CFLBC-4 Dusk to Dawn Floodlight Control Photocell Jandorf Make A Lamp Lamp Kit Westinghouse 8149400 Clip-On Shade
Outdoor dusk to dawn floodlight light control for Halogen/CFL/LED bulbs. Long stem design fits inside most flood lights, spot lights or enclosed exterior fixtures. Turns compact fluorescent, LED, halogen and incandescent bulbs on at dusk, off at dawn. 150 watts maximum. Plastic housing, 4.3" x 3.35" x 3.35". Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. White plastic dome. 4-1/4" height, 7-3/4" diameter.
Starlite 58672 Low Pressure Quartz Tungsten Halogen Lamp AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control Jandorf 60221 Glass Shade Holder
Low pressure, UV-stop quartz capsule, Tungsten halogen bulbs with axial filaments. Suitable for open fixtures; use for small aperture down lighting, residential, commercial and industrial applications including accent strip, task, and display lighting. 4,000 average life hours. 1-3/4" overall length. For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65". Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum.
Jandorf 60222 Glass Shade Holder Gator 7186 Multi-Surface Zip Sander Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control
Provides overhead lighting and supports glass shade. Includes: 1 glass shade holder with 18AWG pre-wired 6" insulated leads, ground wire and insulation - brass finish, 1 - 4" offset crossbar, 2 - 8-32 x 1/2" mounting screws, 2 - 8-32 x 2" mounting screws, 1 grounding screw and 3 knurled screws - brass finish. Rated 250V for use with 60W lamp maximum. Great for sanding flat surfaces as well as hard-to-reach areas. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly in your hand. Contains 2-220 grit, 2-120 grit and 2-80 grit refill sheets and diamond shape sander. Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35".
Jandorf 60132 SPT-1 Lamp Kit With Harp Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol
Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple. Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed. Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed.
Westinghouse 8116700 Swirl Light Shade Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control
Fitter - 2 1/4", height - 5", diameter - 6". For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed.
Westinghouse 8190000 Light Globe Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol Area Lighting CPGI-ALR-OLC-5C Photocontrol
White acrylic. 4" fitter, 8" diameter. Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed. Designed to control outdoor Par-38 flood or spotlights for dusk-to-dawn security lighting for driveways, entranceways, and patios. 120 volt with a range of  105-130 volts, 150 watt tungsten load rating.
3M Pro-Pak Die-Cut Waterproof Sanding Screen 3M Pro-Pak Die-Cut Waterproof Sanding Screen Westinghouse 8142200 Light Shade
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Fitter - 2-1/4", height - 4-3/4", diameter - 5-3/8"
Gator 7800 Micro Zip Sanding Kit 3M 99439 Drywall Sanding Screen Westinghouse 7026800 3-Way Make-A-Lamp Socket Kit
Small size allows for easy access to tight spots. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly under your index finger. Contains 10-220 grit, 10-120 grit and 10-80 grit refill sheets. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Brass plated 10" detachable harp, 18 gauge 8' UL Listed cord set, 3 way socket, finial and hardware. 150 watts maximum.
3M 99440 Drywall Sanding Screen Feit BP15T6-130 Dimmable Incandescent Lamp Westinghouse 8131400 Light Shade
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. For lighting in switchboards, exit lights, picture lights and appliances. Brass base resists vibration and corrosion. 1,500 to 2,000 average life hours; 4,200 hours for 130 volt lamps used on a 120 volt line; 8,000 hours for 145 volt lamps used on a 120 volt line. 3" overall length. Fitter - 2-1/4", height - 5-3/ 4", diameter - 4-7/ 8".
Westinghouse 8140900 Light Shade Cooper EA24 Mounting Arm and Hardware Feit BP25T10/IF Dimmable Incandescent Lamp
Tapered shape. Standard 2-1/4-inch fitter. Extends light fixtures 24". Works with Cooper Lighting's NH Series mercury vapor lights, G Series and No.E70H high pressure sodium light fixtures. Includes mounting arm and hardware. Designed for general service, aquariums and picture lights. 2,000 average life hours.
Norton 02302 Drywall Sanding Screen Paper Norton 02049 Drywall Sanding Screen Paper Jandorf Make A Lamp SPT-1 Lamp Kit With Harp
For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Create a lamp or repair an existing one. 8' SPT-1 lamp cord (18 gauge) with polarized plug, push-through socket rated: 660W-250V. Lock nut and lamp nipple.
Norton 04748 Drywall Sanding Paper Heathco HZ-5690-AL Light Fixture Arm Extension Jandorf 60260 Swag Kit
For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length. Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings.
Feit BP25T6 Dimmable Incandescent Lamp Norton 04749 Drywall Sanding Paper Feit BP40T10/IF Dimmable Incandescent Lamp
For lighting in switchboards, exit lights, picture lights and appliances. Brass base resists vibration and corrosion. 1,500 to 2,000 average life hours; 4,200 hours for 130 volt lamps used on a 120 volt line; 8,000 hours for 145 volt lamps used on a 120 volt line. 3" overall length. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Designed for general service, aquariums and picture lights. 2,000 average life hours.
Westinghouse 8126500 Hand Painted Leaf Light Shade Jandorf 60262 Swag Kit Westinghouse 8142700 Handblown Spice Swirl Light Shade
Hand painted glass makes each piece a unique creation. Fitter - 2-1/4", height - 5-3/8", diameter - 6". Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings. Spice swirlglass. Tapered barrel shape, yellow shade with white swirls. Fitter 2-1/4", height 5-3/4", diameter 4-5/8"
Westinghouse 8141200 Light Shade Feit BP40T10 Dimmable Incandescent Lamp Westinghouse 8131000 Giraffe Spot Handblown Light Shade
Slightly flared. Subtle white-on-white basket weave pattern. 5-7/8" high, 5-7/8" wide, 3-3/4" deep. Standard 2-1/4" fitter. Designed for general service, aquariums and picture lights. 2,000 average life hours. Handblown exotic giraffe spot shade. The tapered drum shape features a mottled giraffe spot pattern with rich brown and yellow hues that offers a vibrant centerpiece or a bright accent. Fitter - 2-1/4", height - 5-3/4", diameter - 4-1/2".
Westinghouse 8131100 Fire Pit Handblown Light Accessory Shade Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock Westinghouse 0101100 Recessed Light Converter
Fitter - 2-1/4", height - 5-3/8", diameter - 4-7/8". For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height. Transform existing recessed lighting into a pendant or light fixture. Hang any pendant or light fixture of 50 pounds or less where you currently have recessed lighting. Adjusts to any fit can size between 4" and 6". No visible screws or hardware and the decorative medallion can be painted. Works with existing recessed cans that use medium base PAR16, R16, A19, R20, PAR20, BR25, BR30, R30, PAR30, BR38, PAR38, BR40 or R40 light bulbs and is suitable for damp locations. Includes adjustable bar, socket adapter, mounting bar, round metal plate, decorative medallion and hardware. Can be used on sloped ceilings up to 45 degrees.1.46" height x 6" diameter. ETL Listed.
Super Q 58884 Quartz Single Ended Tungsten Halogen Lamp Feit BP40T61/2IF Incandescent Lamp Jandorf 60261 Swag Kit
Tungsten halogen bulb, E11 screw base - clear. 2,000 average life hours. For exit signs, showcases and refrigerators. Brass bases resist vibration and corrosion. 5-3/8" overall length. Used for hanging a light fixture when there is no overhead electrical source. Contains one each 15' chain, 20' SPT-1 cord with polarized plug (18 gauge) and feed-through cord switch (3A 125V), and two each swag hooks, hanger bolts, threaded studs and spring toggle wings.
Feit BP25T10 Dimmable Incandescent Lamp Feit BP15T6-145 Dimmable Incandescent Lamp Osram Sylvania 18037 Incandescent Lamp
Designed for general service, aquariums and picture lights. 2,000 average life hours. For lighting in switchboards, exit lights, picture lights and appliances. Brass base resists vibration and corrosion. 1,500 to 2,000 average life hours; 4,200 hours for 130 volt lamps used on a 120 volt line; 8,000 hours for 145 volt lamps used on a 120 volt line. 3" overall length. Use for lighting in switchboards, showcases, and some appliances. 2,000 average life hours. 3-1/2" overall length.
Bell 5638-5 Swivel Mount Photocontrol Westinghouse 8560200 Light Shade Osram Sylvania 18493 Incandescent Lamp
Used for sunset activated automatic control of night lighting. Swivel switch, 1/2" NPT, 120 volt 50-60 HZ. Durable weatherproof construction. Built-in time delay to ignore auto headlamps or other temporary light flashes. Swivel switch, locknut. Fits with single lamp. 2000 watts. UL Listed. Crystal glass. 3-1/4" fitter, 5-3/4" height, 5-1/2" diameter. Incandescent tube. 1,000 average life hours. 5-5/8" overall length.
Osram Sylvania 18491 Incandescent Lamp Osram Sylvania 18494 Incandescent Lamp Osram Sylvania 18492 Incandescent Lamp
Incandescent tube. 1,000 average life hours. 5-5/8" overall length. Incandescent tube. 1,000 average life hours. 5-5/8" overall length. Incandescent tube. 1,000 average life hours. 5-5/8" overall length.
Feit BP20T61/2 Dimmable Incandescent Lamp Feit BP25T61/2 Dimmable Incandescent Lamp Feit BP40T61/2 Incandescent Lamp
For exit signs, showcases and refrigerators. Brass bases resist vibration and corrosion. 5-3/8" overall length. For exit signs, showcases and refrigerators. Brass bases resist vibration and corrosion. 5-3/8" overall length. For exit signs, showcases and refrigerators. Brass bases resist vibration and corrosion. 5-3/8" overall length.
Westinghouse 8140500 Light Shade Feit BPQ20T3 Dimmable Halogen Lamp Feit BPQ50T4 Dimmable Halogen Lamp
Tapered shape. Standard 2-1/4-inch fitter. Clear, compact and dimmable, used for desk lamps and more. 2,000 average life hours. Clear, compact and dimmable, used for desk lamps and more. 2,000 average life hours.
Feit BPQ10T3 Dimmable Halogen Lamp Norton 45600 Hand Pad Osram Sylvania 18495 Incandescent Lamp