Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > LIGHTING - TRACK
Sort By:
1
ALI 4019 Drywall Sanding Screen ALI 4008 Drywall Sanding Screen 3M Sand-Pak Waterproof Sanding Screen
Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse.
3M Sand-Pak Waterproof Sanding Screen Saint-Gobain FDW6641-U Fibatape Drywall Sanding Screens Saint-Gobain FDW6642-U Fibatape Drywall Sanding Screens
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Reversible, non-clogging, open mesh, precut for quick and easy attachment to FibaTape vacuum drywall sander, impregnated with extra sharp, silicon carbide abrasive for fast and easy work. Coarse 100-grit for trouble-free first coat sanding, fine 150-grit for extra-smooth final finishing. Rinse with cold water for reuse. Reversible, non-clogging, open mesh, precut for quick and easy attachment to FibaTape vacuum drywall sander, impregnated with extra sharp, silicon carbide abrasive for fast and easy work. Coarse 100-grit for trouble-free first coat sanding, fine 150-grit for extra-smooth final finishing. Rinse with cold water for reuse.
Hyde Tools 09916 Pre-Cut Sanding Screen Hyde Tools 45395 Sanding Block Tools Norton 04171 Drywall Sanding Screen Paper
Designed specifically for use with drywall compound, 45-degree mesh angle offsets typical angle of sanding head in use. Precut to 3-1/4" x 11-1/4". For use with any Hyde pole-sander heads. Also fits Vac-Sanding kits. 2 sheets. Solid, flexible, rubber construction holds paper securely. For sanding all materials, whether flat surfaces (wrap paper around bottom) or curved (wrap around top). Use 1/4 sandpaper sheets (not included). For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging.
Norton 04169 Drywall Sanding Screen Paper 3M Sand-Pak Die-Cut Waterproof Sanding Screen Cooper LZR000212P Mini Track Light Connector
For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Tough, sharp silicon carbide abrasive cuts fast to sand and contour irregular areas on drywall compounds and plaster; also used on wood, plastic, and painted surfaces. Open mesh design resists loading and allows use of both sides. Rinse to reuse. Trim to fit any sanding block or pole sander. For joining two sections end-to-end.
Ali Industries 7280 Gator Rubber Sanding Block 3M 9292 Sanding Block Tools Westinghouse 8133300 Honey Swirl Light Accessory Shade
The classic hand sanding tool will accommodate any standard sandpaper, pre-cut sheet or stick-on sandpaper. For fast and easy hand sanding of flat and curved surfaces. Made of heavy rubber for a comfortable grip and better control. 2-3/4"W x 5"L block uses sandpaper cut to fit around sanding faces. Paper not included. Honey swirl scavo shade with wide bell shape. Fitter - 2-1/4", height - 4-3/ 8", diameter - 6-7/ 8".
Mr Heater 20381 Burner Head Westinghouse 8186900 Light Shade 3M 461-000 Sandblaster Sanding Pad Tools
For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle. Fitter - 3-1/4", diameter - 6" Use to sand hard-to-reach corners and angles. Use with SandBlaster sanding or finishing pad.
Westinghouse 8149400 Clip-On Shade Cooper LZR000200P Track Live-End Feed Cooper LZR000202P Laser Track Floating Canopy Feed
White plastic dome. 4-1/4" height, 7-3/4" diameter. With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware.
Westinghouse 8116700 Swirl Light Shade Cooper LZR000203P Track Light L-Connector Mr. Heater F220351 Preformed Mantle
Fitter - 2 1/4", height - 5", diameter - 6". To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers. Replaces broken preformed mantles, or can be used with ceramic burner head 20338 and gasket 20339 to convert light from soft mantle to preformed mantle. Fits Paulin gas lights.
Westinghouse 8135600 Tortoise Shell Light Shade 3M 463-000 Sandblaster Sanding Pad Tools Westinghouse 8190000 Light Globe
Fitter - 2-1/4", height - 5-1/4", diameter - 4-3/4". Designed to work with SandBlaster flexible sanding and finishing pads. Has a ratcheting, rotating handle. White acrylic. 4" fitter, 8" diameter.
3M Pro-Pak Die-Cut Waterproof Sanding Screen 3M Pro-Pak Die-Cut Waterproof Sanding Screen Westinghouse 8142200 Light Shade
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Fitter - 2-1/4", height - 4-3/4", diameter - 5-3/8"
Halo LZR102P Miniature Linear Laser Track Light System 3M Pro-Pak Die-Cut Waterproof Sanding Screen 3M 99439 Drywall Sanding Screen
Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets.
Cooper LZR000208P Laser Track Light Cord/Plug Westinghouse 8138200 Light Shade Westinghouse 8137500 Tortoise Shell Light Shade
Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. Linen glass with a wide bell shape. Fitter - 2-1/4", height - 5", diameter - 7-3/4". Fitter - 2-1/4", height - 5", diameter - 7-1/2".
3M 99440 Drywall Sanding Screen Westinghouse 8131400 Light Shade Westinghouse 8140900 Light Shade
Diecut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Open-mesh cloth backing reduces loading and allows use of both sides. Rinse to reuse. Packaging strong enough to use as storage container for unused sheets. Fitter - 2-1/4", height - 5-3/ 4", diameter - 4-7/ 8". Tapered shape. Standard 2-1/4-inch fitter.
Norton 02302 Drywall Sanding Screen Paper Norton 02049 Drywall Sanding Screen Paper Norton 04748 Drywall Sanding Paper
For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging.
Cooper Lighting LZR000301P Halo Track Lights Norton 04749 Drywall Sanding Paper Westinghouse 8126500 Hand Painted Leaf Light Shade
White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. For sanding drywall compound and patching plaster prior to priming. Waterproof screen resists clogging. Hand painted glass makes each piece a unique creation. Fitter - 2-1/4", height - 5-3/8", diameter - 6".
Westinghouse 8142700 Handblown Spice Swirl Light Shade Westinghouse 8141200 Light Shade Cooper Lighting LZR000104P Lazer Lighting Tracks
Spice swirlglass. Tapered barrel shape, yellow shade with white swirls. Fitter 2-1/4", height 5-3/4", diameter 4-5/8" Slightly flared. Subtle white-on-white basket weave pattern. 5-7/8" high, 5-7/8" wide, 3-3/4" deep. Standard 2-1/4" fitter. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track.
Westinghouse 8131000 Giraffe Spot Handblown Light Shade Westinghouse 8135300 Dappling Design Light Shade Westinghouse 8141300 Light Shade
Handblown exotic giraffe spot shade. The tapered drum shape features a mottled giraffe spot pattern with rich brown and yellow hues that offers a vibrant centerpiece or a bright accent. Fitter - 2-1/4", height - 5-3/4", diameter - 4-1/2". Fitter - 2-1/4", height - 4-3/4", diameter - 5". Tapered shape. Standard 2-1/4-inch fitter.
Westinghouse 8131100 Fire Pit Handblown Light Accessory Shade Cooper Lighting LZR000330P Halo Track Lights Cooper Lighting LZR000301P/W Halo Track Lights
Fitter - 2-1/4", height - 5-3/8", diameter - 4-7/8". Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16". White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust.
Cooper Lighting LZR000304P/W Halo Track Lights Westinghouse 8560200 Light Shade Westinghouse 8140500 Light Shade
For use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types. 4" width x 5-3/8 depth, maximum extension 8-1/4". Crystal glass. 3-1/4" fitter, 5-3/4" height, 5-1/2" diameter. Tapered shape. Standard 2-1/4-inch fitter.
Westinghouse 8124200 Ruffled Crimp Edge Light Shade Michigan 1100-02 Pine Step Ladder Westinghouse 8561700 Light Shade
Replacement glass, 2-1/4" fitter, 4-7/8" height, 5" diameter. Wrap around top ears for top protection. Outside galvanized steel spreaders. Knee Braces on bottom step. Outside washers. Bottom of front steps fully rodded through slots. Steps spaced evenly - 9" apart. High quality finished rails with eased edges. Rail ends are angle cut for full ground contact. Blind bore back legs with 1 rear rectangular horizontal. Dimensions: Front Rails 25/32" x 2-5/8"; Back legs 25/32" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Steps 3/4" x 3-1/4"; Rear Horizontals 3/4" x 2-1/2". Replacement glass, 3-1/4" fitter, 4-3/4" height, 3-5/8" diameter.
Norton 43140 Rubber Sanding Block Cooper Lighting LZR000401P Halo Track Lights Michigan 1100-04 Pine Step Ladder
Adapts to mild contours and flat surfaces. For wet or dry sanding on all materials. With integral 12 volt electronic transformer. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Front loading lamp design. 12 volt MR16, 50 watts maximum. For accent and display lighting applications. 2-1/8" width x 2" depth, maximum extension of 4-7/8". Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4".
Westinghouse Williamsburg 8516200 Handblown Hurricane Glass Westinghouse 8570500 Handblown Light Shade Westinghouse 8557000 Handblown Light Shade
Clear 1-5/8" fitter, 6-1/2" height, 3-3/4" diameter. Fitter - 3-1/4", diameter - 6" Gloss white glass, machine blown.
ALI 3300 Pre-Cut Drywall Sanding Screen Westinghouse 8110000 Handblown Etched Fan-Fixture Shade ALI 3303 Pre-Cut Drywall Sanding Screen
Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Fitter - 1 5/8", height - 5", diameter - 4-1/4". Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging.
ALI 3302 Drywall Sanding Screen ALI 3301 Drywall Sanding Screen Marshalltown 817 Die-Cut Sanding Screen
Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Will fit all MARSHALLTOWN sanders and similar ones made by others. Has an open weave that can be used in wet or dry applications.
ALI 3304 Drywall Sanding Screen Cooper Lighting LZR000406P Halo Track Lights Michigan 1100-05 Pine Step Ladder
Precut & notched to fit drywall sanders with clamps. Best for sanding and preparing joint compounds, spackling and for scuffing painted surfaces before repainting. Grit is bonded on both sides for longer life and the open mesh screen reduces clogging. Polycarbonate casing and matching polycarbonate arm. Attaches electrically and mechanically anywhere along track. Deep drawn steel lamp housing with vents in rear. Die cast aluminum black baffle with lamp retention spring pulls out for relamping. Uses 12 volt MR16 lamps, 50 watt maximum. UL/CSA listed for use with Halo and Lazer-by-Halo track and track systems. 2-1/2" width x 3-7/8" depth, 6-3/4" maximum extension. Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4".
Westinghouse 8525400 Light Shade Westinghouse 8557800 Handblown Schoolhouse Light Shade Michigan 1311-04 Stocky Step Ladder
Clear prismatic globe. 3-1/4" fitter, 6-3/8" diameter. White glass. 4" fitter, 6-1/4" height, 7-1/4" diameter. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Westinghouse 8560400 Light Shade Westinghouse 8560600 Utility Light Shade Westinghouse 8528200 Handblown Etched Light Shade
Replacement glass, 3-1/4" fitter, 4-1/2" height, 5-3/4" length. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design. Frosted, 2-1/4" fitter, 5" height, 4-1/8" diameter.
Michigan 1100-06 Pine Step Ladder Louisville FS4006 Commercial Step Ladder Werner 5906 Single Sided Step Ladder
Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Westinghouse 8557100 Handblown Light Globe Westinghouse 8560800 Utility Light Shade Werner 5904 Single Sided Step Ladder
Gloss white glass, machine blown. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Louisville FS4004 Commercial Step Ladder Michigan 1200 Pine Step Ladder Louisville FS2004 Commercial Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8"; Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Westinghouse 8552800 Handblown Schoolhouse Light Shade Werner 6000 Step Ladder Michigan 1311-06 Stocky Step Ladder
White glass, 4" fitter, 7" height, 8-1/2" diameter. Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Westinghouse 8180000 Wheat Design Ruffled Edge Light Diffuser Westinghouse 8149300 Clip-On Shade Werner 6004 Single Sided Step Ladder
Clear with ruffled edge. Square 12", depth 1-1/2".  Pack of 10. Clear prismatic acrylic dome. 4" height, 8" diameter. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Louisville FS2006 Commercial Step Ladder Werner 6005 Single Sided Step Ladder Westinghouse 8180700 Floral Lamp Shade/Diffuser
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Clear floral design on white.
Werner 6006 Single Sided Step Ladder Louisville FS2005 Commercial Step Ladder Louisville FS1504 Extra Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Michigan 1200 Pine Step Ladder DeWalt DXL3010-04 Step Ladder Michigan 1311-08 Stocky Step Ladder
Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8"; Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Westinghouse 8175900 Channel Shade/Diffuser Werner 6200 Single Sided Step Ladder Westinghouse 8160900 Utility Light Shade
Replacement glass, 3-3/4" width; 3" depth; 3/8" hole size. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Features horizontal grooves on a compact white glass drum body for detail. Clear glass bottom is distinguished by raised concentric circles that add depth and visual interest to the design.
Louisville FS1506 Extra Step Ladder DeWalt DXL3110-06 Step Ladder Werner 6200 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
LADDER IA FBRGLS CRSS-STEP 4FT Louisville FS4008 Commercial Step Ladder Louisville FS1505 Extra Step Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Westinghouse 8181900 Dot Pattern Light Diffuser Werner 6206 Single Sided Step Ladder DeWalt DXL3010-06 Step Ladder
Clear, dot pattern. 13'' diameter, 1-1/4'' depth. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
Westinghouse 8181000 Floral Light Diffuser Louisville FS2008 Commercial Step Ladder Michigan 1311-10 Stocky Step Ladder
Clear floral design on white. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Werner 5908 Single Sided Step Ladder Werner 6200 Single Sided Step Ladder DeWalt DXL3110-08 Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes.
LADDER IA FBRGLS CRSS-STEP 6FT Werner 7306 Single Sided Step Ladder 3M Wetordry Waterproof Sanding Screen
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Durable, Fabri-Cut open screen cloth mesh with a waterproof bond permits easy cleaning of sanding residue for improved cutting efficiency and for use where filling or loading is a problem with normal types of abrasives. Also used for highlighting metal substrates prior primer coating.
3M Wetordry Waterproof Sanding Screen 3M 10457 Waterproof Sanding Screen Louisville FS1508 Extra Step Ladder
Durable, Fabri-Cut open screen cloth mesh with a waterproof bond permits easy cleaning of sanding residue for improved cutting efficiency and for use where filling or loading is a problem with normal types of abrasives. Also used for highlighting metal substrates prior primer coating. Durable, Fabri-Cut open screen cloth mesh with a waterproof bond permits easy cleaning of sanding residue for improved cutting efficiency and for use where filling or loading is a problem with normal types of abrasives. Also used for highlighting metal substrates prior primer coating. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner Old Blue Single Sided Step Ladder DeWalt DXL3010-08 Step Ladder 3M 10458 Sanding Screen Sheet
Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Durable, Fabri-Cut open screen cloth mesh with a waterproof bond permits easy cleaning of sanding residue for improved cutting efficiency and for use where filling or loading is a problem with normal types of abrasives. Also used for highlighting metal substrates prior primer coating.
Werner T6006 Twin Ladder Werner 6208 Single Sided Step Ladder Werner 7406 Extra Step Ladder
Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
Werner T6206 Twin Ladder LADDER IA FBRGLS CRSS-STEP 8FT Werner Old Blue Single Sided Step Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
Louisville FM1500 Twin Step Ladder Werner 7308 Single Sided Step Ladder 3M 10459 Sanding Screen Sheet
Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Durable, Fabri-Cut open screen cloth mesh with a waterproof bond permits easy cleaning of sanding residue for improved cutting efficiency and for use where filling or loading is a problem with normal types of abrasives. Also used for highlighting metal substrates prior primer coating.
Louisville FT1000 Tripod Ladder DeWalt DXL3810-06 Step Ladder Werner T7406 Multi-Use Twin Step Ladder
Non-conductive. Includes steel reinforced outrigger, center-pull spreader brace, outrigger rail brackets, double-rivet step construction, heavy duty steel gusset bracing and full metal boot. Meets  or exceeds the safety standards set by ANSI and OSHA. 3" steps. Dimensions: 14" x 6-1/2" top, 3-1/8" x 1-1/8" front rails, 1-1/2" square. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide.
Werner 7408 Extra Step Ladder Werner T6008 Twin Ladder Werner T6208 Twin Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe.
Louisville FS1510 Extra Step Ladder Louisville FM1500 Twin Step Ladder Werner 6210 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Werner 6212 Single Sided Step Ladder DeWalt DXL3010-10 Step Ladder LADDER IA FBRGLS CRS-STEP 10FT
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 7410 Extra Step Ladder DeWalt DXL3810-08 Step Ladder Werner T7408 Multi-Use Twin Step Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide.
Louisville FS1512 Extra Step Ladder LADDER IA FBRGLS CRS-STEP 12FT
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
   
 
1