Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES > BATTERY PORCH LIGHTING
Sort By:
1
Gator 4465 Sanding Sheet Gator 4466 Sanding Sheet Gator 4464 Sanding Sheet
Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish. Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish. Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish.
Gator 4461 Sanding Sheet Gator 4463 Sanding Sheet Gator 4462 Sanding Sheet
Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish. Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish. Best for general wood sanding and final wood preparation before apply stain, varnish, or paint.  Softly cuts to produce a smooth finish.
ALI 4486 Drywall Sanding Screen ALI 4487 Drywall Sanding Screen 3M 9035NA Sand Paper?
Sharp, fast cutting silicon carbide grain produces a smoother finish. Precut & notched to fit the most popular drywall sanding tools. Advanced resin bonding system "locks" the grain to the paper. Sharp, fast cutting silicon carbide grain produces a smoother finish. Precut & notched to fit the most popular drywall sanding tools. Advanced resin bonding system "locks" the grain to the paper. Natural mineral that fractures during use to form new cutting edges for producing smooth finishes on bare woods.
SANDPAPER FINE GRIT 3-2/3INX9 SANDPAPER MED GRIT 3-2/3INX9IN SANDPAPER COARSE 3-2/3INX9IN
For sanding a wide variety of bare and unfinished goods. For sanding a wide variety of bare and unfinished goods. For sanding a wide variety of bare and unfinished goods.
3M 9036NA Sand Paper? 3M 9037NA Sand Paper? 3M 9038NA Sand Paper?
Natural mineral that fractures during use to form new cutting edges for producing smooth finishes on bare woods. Natural mineral that fractures during use to form new cutting edges for producing smooth finishes on bare woods. Natural mineral that fractures during use to form new cutting edges for producing smooth finishes on bare woods.
3M 9040NA Sand Paper? Powerzone 30000-3L Recessed Light Bar Hanger Norton 03252 Die-Cut Drywall Sanding Paper
Natural mineral that fractures during use to form new cutting edges for producing smooth finishes on bare woods. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. For sanding drywall compound and patching plaster prior to priming.
Norton 03253 Drywall Sanding Paper Norton 1726 Steel Wool Pad Norton 1727 Steel Wool Pad
For sanding drywall compound and patching plaster prior to priming. For heavy duty cleaning and stripping through finishing to light duty polishing. Won't rust, shred or splinter. Washable and reusable. Can be cut and folded. Use with or without chemicals. For heavy duty cleaning and stripping through finishing to light duty polishing. Won't rust, shred or splinter. Washable and reusable. Can be cut and folded. Use with or without chemicals.
Norton 1728 Steel Wool Pad Norton 1729 Steel Wool Pad Saint-Gobain FDW6640-U Fibatape Drywall Sanding Sheets
For heavy duty cleaning and stripping through finishing to light duty polishing. Won't rust, shred or splinter. Washable and reusable. Can be cut and folded. Use with or without chemicals. For heavy duty cleaning and stripping through finishing to light duty polishing. Won't rust, shred or splinter. Washable and reusable. Can be cut and folded. Use with or without chemicals. Extra sharp, silicon carbide abrasive on precut backing designed for quick, easy attachment to FibaTape hand or pole sanders (not FibaTape vacuum sander). Easily cuts through drywall compound for fast work. Coarse 80-grit for fast first coat sanding, fine 120-grit for finer, smoother finish coat.
3M 9091 Drywall Sanding Sheet 3M 9092DC-NA Sand Paper? Homax 1021114 Steel Wool Pad
Diecut to fit most drywall sanding tools; quickly attaches to hand or pole sanders with precut tabs. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Diecut to fit most drywall sanding tools; quickly attaches to hand or pole sanders with precut tabs. Designed for sanding drywall joints, patching compounds, and plaster to a fine finish. Also used on wood, metal, plastic, and painted surfaces. Sharp silicon carbide abrasive lasts long, cuts fast. Can be used for a variety of household, remodeling and construction tasks. Includes 3 grades of steel wool: Coarse (#3), Medium (#0) and Fine (#000). Use coarse-grade for stripping, medium-grade for in-between coats, and fine-grade wool for finishing.
Homax 106607-06 Steel Wool Pad Homax 106606-06 Steel Wool Pad Homax 106605-06 Steel Wool Pad
Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces.
Homax 106603-06 Steel Wool Pad Homax 106604-06 Steel Wool Pad Homax 106601-06 Steel Wool Pad
Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces.
Homax 106600-06 Steel Wool Pad Homax 106602-06 Steel Wool Pad 3M 10115 Rectangular? Steel Wool Pad
Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Use to remove old finishes, (most stains, lacquers, and protective finishes) without harming the original surface, or to clean and remove rust from metal surfaces. Will not rust, splinter or shred. Can be rinsed, stored and reused. Outlasts steel wool. Compatible with both solvent-based and water based stains and finishes.
3M 10116 Rectangular? Steel Wool Pad 3M 10118 Rectangular? Steel Wool Pad 3M 10120 Rectangular? Steel Wool Pad
Will not rust, splinter or shred. Can be rinsed, stored and reused. Outlasts steel wool. Compatible with both solvent-based and water based stains and finishes. Will not rust, splinter or shred. Can be rinsed, stored and reused. Outlasts steel wool. Compatible with both solvent-based and water based stains and finishes. Will not rust, splinter or shred. Can be rinsed, stored and reused. Outlasts steel wool. Compatible with both solvent-based and water based stains and finishes.
ALI 7158 Hook and Loop Drywall Sanding Paper Refill Powerzone TM5 Open Recessed Light Fixture Trim ALI 7156 Hook and Loop Drywall Sanding Paper Refill
Fits Gator Hook & Loop pole sanders #7155. Sharp, fast cutting silicon carbide grain produces a smooth finish on drywall. Hook & Loop holding system eliminates sheets from tearing along the clamped on edges. Heavy duty paper. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Fits Gator Hook & Loop pole sanders #7155. Sharp, fast cutting silicon carbide grain produces a smooth finish on drywall. Hook & Loop holding system eliminates sheets from tearing along the clamped on edges. Heavy duty paper.
ALI Hook and Loop Drywall Sanding Paper Refill 6 in ALI 7157 Hook and Loop Drywall Sanding Paper Refill Powerzone TM12 Open Recessed Light Trim
Fits Gator Hook & Loop pole sanders #7155. Sharp, fast cutting silicon carbide grain produces a smooth finish on drywall. Hook & Loop holding system eliminates sheets from tearing along the clamped on edges. Heavy duty paper. Fits Gator Hook & Loop pole sanders #7155. Sharp, fast cutting silicon carbide grain produces a smooth finish on drywall. Hook & Loop holding system eliminates sheets from tearing along the clamped on edges. Heavy duty paper. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings.
Marshalltown 919 Die-Cut Sand Paper? Marshalltown 936 Die-Cut Sand Paper? Cooper LZR000212P Mini Track Light Connector
Will fit MARSHALLTOWN sanders and similar ones made by others. Will fit MARSHALLTOWN sanders and similar ones made by others. For joining two sections end-to-end.
Powerzone TM9 Open Recessed Light Trim Marshalltown 916 Die-Cut Drywall Sanding Paper Powerzone TM3 Open Baffle Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. Will fit MARSHALLTOWN sanders and similar ones made by others. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM2 Open Baffle Trim Powerzone TM6 Open Baffle Trim Halo 301P Open Recessed Light Trim
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
Norton Hook and Loop Corner Sand Paper Norton Hook and Loop Corner Sand Paper Halo 401P Open Recessed Light Trim
Used for sanding drywall compound and plaster. Anti-clog coating. Designed to work with Inside Corner Tool Orgill SKU# 9301979. Used for sanding drywall compound and plaster. Anti-clog coating. Designed to work with Inside Corner Tool Orgill SKU# 9301979. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved.
Halo 300P Open Recessed Light Trim Powerzone TRIM201-BK (MTM2) Baffle Trim Halo H7ICT Recessed Housing
Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
ALI Zip XL Refill Sanding Sheet ALI Zip XL Step 2 Refill Sanding Sheet ALI Zip XL Step 3 Refill Sanding Sheet
Fits ZipXL Hand Sander #7231. Sand large areas including drywall with ease. The "Quick-change" hook & loop holding system allows faster sheet changes. Fits ZipXL Hand Sander #7231. Sand large areas including drywall with ease. The "Quick-change" hook & loop holding system allows faster sheet changes. Fits ZipXL Hand Sander #7231. Sand large areas including drywall with ease. The "Quick-change" hook & loop holding system allows faster sheet changes.
3M Pro-Pak Sand Paper? Norton 01208 Die-Cut Drywall Sanding Paper Norton 4746 Die-Cut Drywall Sanding Paper
Sharp, synthetic silicon carbide mineral cuts fast and smooth for long-lasting performance. Precut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, paint, and plaster. Packaging strong enough to use as storage container for unused sheets. For sanding drywall compound and patching plaster prior to priming. For sanding drywall compound and patching plaster prior to priming.
3M Pro-Pak Sand Paper? Halo 5000P Open Splay Trim 3M Pro-Pak Sand Paper?
Sharp, synthetic silicon carbide mineral cuts fast and smooth for long-lasting performance. Precut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, paint, and plaster. Packaging strong enough to use as storage container for unused sheets. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). Sharp, synthetic silicon carbide mineral cuts fast and smooth for long-lasting performance. Precut to fit most drywall sanding tools. Designed for sanding drywall joints, patching compounds, paint, and plaster. Packaging strong enough to use as storage container for unused sheets.
Norton 04747 Drywall Sanding Paper Halo 70PS Recessed Light Shower Trim Halo H7ICAT Recessed Housing
For sanding drywall compound and patching plaster prior to priming. Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Gator 3312 Sanding Sheet Gator 3311 Sanding Sheet Coilex Halo 310P Baffle Trim
Sharp, fast cutting silicon carbide grain produces a smoother finish. Precut & notched to fit the most popular drywall sanding tools. Advanced resin bonding system "locks" the grain to the paper. Sharp, fast cutting silicon carbide grain produces a smoother finish. Precut & notched to fit the most popular drywall sanding tools. Advanced resin bonding system "locks" the grain to the paper. Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Powerzone TRIM201-WH (MTM1) Baffle Trim Cooper LZR000200P Track Live-End Feed Cooper LZR000202P Laser Track Floating Canopy Feed
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware.
Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim Halo H750ICAT Recessed Housing Halo H750RICAT Remodel Recessed Housing
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
Coilex Halo 310W Baffle Trim Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim Gator 3310 Sanding Sheet
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). Sharp, fast cutting silicon carbide grain produces a smoother finish. Precut & notched to fit the most popular drywall sanding tools. Advanced resin bonding system "locks" the grain to the paper.
Coilex Halo 410W Baffle Trim Powerzone TM4 Open Baffle Trim Halo H5ICAT Recessed Housing
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381). Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included). For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Cooper LZR000203P Track Light L-Connector Powerzone TRIM201-BN (MTM3) Baffle Trim Halo 5001P Splay Baffle Trim
To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182).
Halo H7 Recessed Housing Powerzone RS2000R (MCN2) Recessed Light Fixture Halo H7 Remodel Recessed Housing
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp posting. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. Non-IC housing, not for direct insulation contact; remodel housing applications. 4" downlight with E27 socket. Use R20/PAR20 50 watt maximum, (bulb not included). Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodate ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
Halo H5T Recessed Housing Halo LZR102P Miniature Linear Laser Track Light System Halo 30WAT Super Recessed Light Fixture Trim
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Socket snaps into trim for consistent lamp positioning. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief.  Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/2" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Self flanged socket supporting super trim AIR-TITE metal baffle with torsion spring construction, makes installation air-tite regardless of housing used. Prevents airflow between attic and living areas. 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381) and H7RICT (025.9697). White trim, white baffle, white reflector. Sleeved.
Powerzone 30002WH3L Recessed Light Fixture 3M Pro-Pak 99411NA Sand Paper? 3M Pro-Pak 99412NA Sand Paper?
Non-IC housing, 5" mini can with 7" white open trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets. Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets.
Halo 78P Eyeball Recessed Light Trim Powerzone 30001WH-3L Recessed Light Fixture Cooper Lighting H7RICAT Recessed Lighting Housing
Wet location and AIR-TITE listed white trim with white eyeball 30 degree Tilt, 360 degree rotation, 8 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved. Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Cooper Lighting Recessed Lighting Housing, 120 VAC, Incandescent Lamp, Insulated Insulation, 6-1/2 in Ceiling, 6 in Diameter, UL, cUL Listed, CSA Certified
Halo H99TAT Recessed Housing Powerzone T513WH-3L Eyeball Recessed Light Trim Powerzone RS6000R+TRIM603-W Recessed Light Kit
Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. The inner housing can be removed from plaster frame to provide access to the junction box. For providing accent and task lighting in non-insulated ceiling or where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box has four 1/2" trade size conduit knockouts with true pry-out slots. UL/cUL Listed Damp Location, Wet Location, feed through covered ceiling with select trims and 1598 Luminaire. Certified under ASTM-E283 for air tight construction. Easy to install. Takes medium base bulb, R-30, 75 watt maximum, (not included). 8" diameter eyeball trim for use with 6" Non-IC/IC housings. Use GU10, 50 watt maximum, (bulb included).
Cooper LZR000208P Laser Track Light Cord/Plug Powerzone T505WH-3L Recessed Light Shower Trim Powerzone 30001BK-3L Recessed Light Fixture
Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. Eight inch diameter drop lens trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
3M Pro-Pak 88595NA Sand Paper? Powerzone RS6000R+ TRIM603- Recessed Light Kit Halo H7 Remodel Recessed Housing
Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets. Use GU10, 50 watt maximum, (bulb included). Can be installed below ceiling. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodates ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL damp locations. UL feed through. UL Listed for direct contact with insulation. CSA certified. IP rated.
Halo H99RTAT Recessed Housing Powerzone TM11 Recessed Light Shower Trim Powerzone TM14 Flat Opal Recessed Light Shower Trim
Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. Can be installed from below the ceiling. For providing accent and task lighting where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four pryouts with integral strain relief for non-metallic sheathed cable. Four remodel clips secure housing and accommodate ceiling thickness of 1/2" and 5/8".  UL/cUL Listed 1598 Luminaire. UL/cUL Damp Location Listed. UL/cUL Listed for Wet Location, covered ceiling - with select trims. Certified Under ASTM-E283 for air tight construction. Eight inch diameter trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included). Diameter of 8" trim with flat opal glass for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included).
Cooper Lighting LZR000301P Halo Track Lights Coilex Halo 993W Ring Baffle Trim Powerzone 30003WH-3L Recessed Light Fixture
White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448). Non-IC housing, 5" mini can with 7" white adjustable eyeball trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
Cooper Lighting LZR000104P Lazer Lighting Tracks Halo H99ICAT Recessed Housing Halo 426 Specular Reflector Cone
Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. For accent and task lighting where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box with integral strain relief. Pass-N-Thru tool-less shortening of bar hangers. Housing can be removed from plaster frame for junction box access. UL Listed for direct contact with insulation. CSA Certified. IP Rated. White trim ring with clear specular reflector cone, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Cooper Lighting LZR000330P Halo Track Lights Cooper Lighting LZR000301P/W Halo Track Lights Cooper Lighting LZR000304P/W Halo Track Lights
Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16". White lampholder with baffle, compatible with all Halo Power-Trac systems for accent and display lighting applications where high coloring rendering and precise beam control are required. PAR20/30/38, MR16, BR30, R20/30, A19 lamp options. Matching arm allows lamp holder to rotate and adjust. For use with Halo, Power-Trac and Lazer-by-Halo track systems. Lamps supported include R, PAR, A and BR types. 4" width x 5-3/8 depth, maximum extension 8-1/4".
Powerzone 5513BIC3L Recessed Light Fixture Powerzone 5502BIC-3L Recessed Light Fixture Coilex Halo 993P Ring Baffle Trim
Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 8" white eyeball trim; for new construction applications. cULus Listed. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 8" white open trim; for new construction applications. cULus Listed. White trim, 5 1/16" diameter for use with 4" incandescent rounds. Non-insulated or insulated housings. For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448).
3M Pro-Pak 88596NA Sand Paper? Powerzone RS2000IC (MCN1) Recessed Light Fixture LIGHT RCSD LED ALUM WWHT 4IN
Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets. For direct insulation contact; new construction applications. E27 socket. 4" downlight with hanger bars. Use R20/PAR20 50 watt maximum bulb (not included). Recessed Light Kit. All-in-one. 3000K
Halo RL560WH-R Retrofit Baffle Trim LIGHT RCSD LED KIT ALUM 5&6IN 3M Pro-Pak Sand Paper?
Comes with a dedicated LED connector for California Title 24 Compliance. For installation into Halo recessed LED housings. Includes an Edison base adapter to accommodate standard screwbase ICAT housings. Can be dimmed with many standard incandescent dimmers, however, an electronic low voltage version of a standard dimmer (with neutral connection) is recommended for many applications. 9.4" W. UL Listed and Classified. Recessed Light Kit. All-in-one. 3000K Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets.
Powerzone 5509BICG3L Recessed Light Fixture Powerzone RS2000RG+ TRIM405 Recessed Light Kit Halo 172PS Opal Recessed Light Shower Trim
Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum; or BR30 bulbs, 65 watt maximum, (not included). UL Listed for damp locations. 6" IC housing with 7" white baffle trim; for new construction applications. cULus Listed. Non-IC housing not for direct insulation contact; remodel housing applications. 4" downlight. Use GU10, 50 watt maximum, (bulb included). Wet location and AIR-TITE listed white trim with frosted glass dome 7-3/4 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Coilex Halo 456W Baffle Trim 3M Pro-Pak Sand Paper? Powerzone RS2000RG+ TRIM405 Recessed Light Kit
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill SKU number:140.7022. Sleeved. Natural mineral abrasive fractures during use to form new cutting edges for producing smooth, fine finishes on bare woods. Packaging strong enough to use as storage container for unused sheets. Non-IC housing not for direct insulation contact; remodel housing applications. 4" downlight. Use GU10, 50 watt maximum, (bulb included).
Fulcrum 20031-107 Adjustable Wireless Porch Light Fulcrum 20031-108 Adjustable Wireless Porch Light PORCH LIGHT 12 LED SILVER
Fulcrum Porch Light, Adjustable, Wireless, 6 V, 25 ft Sensing, 100 deg Sensing, LED Lamp, 6 Lamps, Battery Power, 42, 5-1/2 in Overall Height, 5-1/2 in Overall Width, Plastic, Bronze, Includes: Mounting Plate and Hardware, Weatherproof, For Home and Office Fulcrum Porch Light, Adjustable, Wireless, 6 V, 25 ft Sensing, 100 deg Sensing, LED Lamp, 6 Lamps, Battery Power, 42, 5-1/2 in Overall Height, 5-1/2 in Overall Width, Plastic, White, Includes: Mounting Plate and Hardware, Weatherproof, For Home and Office Weatherproof housing and motion sensor, wireless, adjustable. 5 minute installation. 275 lumens. 4 D batteries (not included).
PORCH LIGHT 12 LED BRONZE     PORCH LIGHT 12 LED WHITE      Halo 998P Adjustable Eyeball Recessed Light Trim
Weatherproof housing and motion sensor, wireless, adjustable. 5 minute installation. 275 lumens. 4 D batteries (not included). Weatherproof housing and motion sensor, wireless, adjustable. 5 minute installation. 275 lumens. 4 D batteries (not included). For use with 4" housings: Halo model numbers (Orgill SKU numbers), H99T (571.7566), H99ICAT (159.7764) and H99RT (300.8448). 5-1/16" diameter white trim for use with 4" incandescent rounds. Non-insulated or insulated housings. 30 degrees maximum tilt.
Cooper Lighting LZR000401P Halo Track Lights Halo H645IC Recessed Housing Coleman L1755 Security Floodlight
With integral 12 volt electronic transformer. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Front loading lamp design. 12 volt MR16, 50 watts maximum. For accent and display lighting applications. 2-1/8" width x 2" depth, maximum extension of 4-7/8". Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. Lamp socket and trim can be adjusted 20 degrees laterally for compound slope ceilings or to compensate for off axis aiming. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-3/8" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/4"  thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Dusk to dawn 300 watt equivalent with button photocell. 10" acrylic reflector, provides 4,300 lumen output at 6,500 degrees K color temperature. Electronic ballast, 8,000 hour lamp life. E39 lamp base. Includes 65 watt mogul base fluorescent bulb. USA ONLY replacement bulb Feit Electric PLF65/65 - Orgill, Inc. SKU 0387977. CA compliant replacement bulb is SKU 1110907. UL & CUL Listed.
Cooper AL6501FL Area Light Norton 26284 Cloth Utility Rolls Norton 26288 Cloth Utility Rolls
Fluorescent safety and security light. Weather resistant die cast aluminum housing. Operates on standard 120 volt 60 Hz household current. Intended to be conduit connected to a properly installed and properly grounded metal weatherproof junction box (not provided). Easy installation, mounting pattern included. Truer white light color compared to yellow high pressure sodium, use where energy efficiency and light color are important. Nighttime on/daytime off controlled by a non-replaceable button type photo control, cULus Listed for wet location use. 65 watt fluorescent bulb included. Replacement bulb is a 4U 65 watt Mogul base fluorescent, like Orgill SKU 038.7977. For general purpose sanding where flexibility and tear-resistance are most important. Cloth backing provides increased strength and durability. For hand strapping, blending machine tool marks, light deburring, and cleaning pipe & tubing. For general purpose sanding where flexibility and tear-resistance are most important. Cloth backing provides increased strength and durability. For hand strapping, blending machine tool marks, light deburring, and cleaning pipe & tubing.
Cooper Lighting LZR000406P Halo Track Lights Heathco SL5651-AL Security Light Powerzone 5000BIC3L Recessed Light Fixture
Polycarbonate casing and matching polycarbonate arm. Attaches electrically and mechanically anywhere along track. Deep drawn steel lamp housing with vents in rear. Die cast aluminum black baffle with lamp retention spring pulls out for relamping. Uses 12 volt MR16 lamps, 50 watt maximum. UL/CSA listed for use with Halo and Lazer-by-Halo track and track systems. 2-1/2" width x 3-7/8" depth, 6-3/4" maximum extension. Dusk-to-dawn operation. Up to 10,400 square foot light coverage. Uses 1 CFL, E39 mogul base bulb (70W) included. Up to 10,000 hour bulb life. Operating temperature: -13 to 120 degrees F. 9.5" width x 12.375" depth x 14.5" height. IC housing for direct insulation contact; new construction applications. Prewired for ease of installation. Installation instructions and templates included. 6" downlight. Built in thermal protection. UL Listed for damp locations. cULus Listed.
Marshalltown 809 Die-Cut Drywall Sanding Paper CCI Modern Security Farm Light Heath Zenith HZ-5660-AL High Pressure Security Light
Will fit all MARSHALLTOWN sanders and similar sanders made by others. CCI Security Farm Light, High Pressure Sodium, Series: Modern, 120 V, ED17 Lamp, Medium E26 Lamp Base, 75 W Lamp, 1 Lamps, 24000 hr Average Life, 2100 K Color Temperature, Magnetic, R-NPF Ballast, Acrylic Housing, Powder Coated Housing, Includes: HPS Lamp, UL, cUL Listed, 6400 lumen Output, For Outdoor Applications Automatic dusk to dawn operation with photo control. Die-cast aluminum housing. Golden white light. Light coverage 17,000 square feet. 70 watt/120 volt S62 lamp included. UL Listed.
AREA LIGHT LED 1900 LUM       Powerzone 5000A3L Recessed Light Fixture Powerzone 5000R-6-3L Recessed Light Fixture
AREA LIGHT LED 1900 LUM
Our Price: $61.99
For building and post mounted doorway, pathway and yard illumination. Dusk to dawn area lighting. 26.34" length x 20.5" width. 20 watts, 120 volts, 1900 lumens, 4000K. Expected service life of up to 10 years. Replaces up to a 100W metal halide luminaire. Die-cast aluminum housing, thermoset powder-coat finish, impact-resistant, polycarbonate lens. Sealed against moisture and environmental contaminants. UL Listed to US and Canadian safety standards for wet locations. Airtight IC housing for direct insulation contact; new construction applications. Prewired for ease of installation. Hanger bar included. 6" downlight. Built in thermal protection. Installation instructions and templates enclosed. UL Listed for damp locations. cULus Listed. Non-IC housing not for direct insulation contact; remodeling applications. Prewired for ease of installation. 6" downlight. UL Listed for damp locations. cULus Listed.
Boston Harbor 5000RIC-3L Recessed Light Fixture LIGHT SECURITY METAL HALID100W Powerzone 5000B-63L Recessed Light Fixture
IC housing for direct insulation contact; remodeling applications. Prewired for ease of installation. 6" downlight. UL Listed for damp locations. cULus Listed. Non-motion security light. Metal - plastic construction. Metal Halide bulb (included). Photocell ensures night only operation. 12.25"w x 13.75"d x 17.4375"h. 8.8 pounds. UL/cUL Listed. Non-IC housing not for direct insulation contact; new construction applications. Prewired for ease of installation. Hanger bar included. 6" downlight. UL Listed for damp locations. cULus Listed.
Powerzone 5000AR-3L Recessed Light Fixture Halo H5RICAT Remodel Recessed Housing Halo H27ICAT Recessed Housing
Airtight IC housing for direct insulation contact; remodeling applications. Prewired for ease of installation. 6" downlight. UL Listed for damp locations. cULus Listed. For remodel installations where the housing will be in direct contact with ceiling insulation. Integral thermal protector provides positive protection against over-lamping. May be installed from below the ceiling. Air-Tite housing prevents airflow between attic and living areas. For use with incandescent lamps. UL listing for Damp Location, UL listing for feed through wiring and UL listing for direct contact with insulation and combustible material. 7" height without trim, 7-1/2" with trim. Will fit in a 5-1/2" ceiling opening. Designed for use in shallow ceilings where 2" x 6" joist construction is used, prevents airflow between living spaces and unconditioned attic areas. Meets the requirements of: California Title 24 for use in insulated ceilings. UL listing for Damp Location, UL listing for feed through wiring, UL listing for direct contact with insulation and combustible material and CSA certification.
Powerzone 5509RIC-6-3L Recessed Light Fixture CCI L1701 Weather-Tight Security Farm Light Halo H27T Shallow Recessed Housing
IC housing for direct insulation contact; remodeling applications. Prewired for ease of installation. Takes medium base bulbs, R-30, 75 watt maximum, (not included). 6" downlight. UL Listed for damp locations. cULus Listed. CCI Security Farm Light, Weather-Tight, ED17 Lamp, Medium E26 Lamp Base, 100 W Lamp, 1 Lamps, 10000 hr Average Life, 4000 K Color Temperature, Magnetic, HX-NPF Ballast, Tempered Glass Lens, Ceiling Mounting, Acrylic Housing, Powder Coated Bronze Housing, Includes: 10 in Acrylic Reflector, UL, cUL Listed, 10500 lumen Output. It uses a 100W Metal Halide ED17 bulb. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 5-1/2" height allows use in 2 x 6 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Ring fixture not included. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
Cooper Lighting ALL-PRO AL3050LPC Area and Wall Light Powerzone 5509BIC-6-3L Recessed Light Fixture Cooper Lighting ALL-PRO AL2050LPC Area and Wall Light
LIGHT AREA LED W/PHOTOCELL
Our Price: $104.30
Provides larger area coverage than 100W Mercury Vapor, 65W CFL and 200W incandescent. Integral photo control provides nighttime on/ daytime off. Heavy-duty corrosion resistant die-cast metal construction. Installs to walls or poles. Security lighting for barns and outdoor dark, secluded areas. 120 volt AC, 60Hz. cULus listed for wet locations. IC housing for direct insulation contact with white trim and baffle; new construction applications. Hanger bar included. Prewired for ease of installation. Use one medium base bulb, R-30, 75 watt maximum, (not included). cULus Listed. Dusk-to-dawn photo control. Nighttime on and daytime off settings. Provides the same area coverage as standard 65W CFL, 100W mercury vapor and 200W incandescent area lights. For illuminating large areas like barns, side roads and pathways. Durable die-cast aluminum housing suitable for wet locations. Powder coated aluminum reflector for maximum LED light output. UV stable polycarbonate lens. Suitable for wall or pole mount applications. 5000K color temperature. 50,000 hours of life. Twist-lock photo control included. 120 volt AC, 60Hz. cULus listed for wet locations.
AREA LIGHT 5500L D2D GREY     LIGHT UTIL D2D GREY LED 10000L 3M 05028 Sanding Roll
AREA LIGHT 5500L D2D GREY
Our Price: $130.04
Dusk-to-dawn photo control. Nighttime on and daytime off settings. Provides the same area coverage as standard 65W CFL, 100W mercury vapor and 200W incandescent area lights. For illuminating large areas like barns, side roads and pathways. Durable die-cast aluminum housing suitable for wet locations. Powder coated aluminum reflector for maximum LED light output. UV stable polycarbonate lens. Suitable for wall or pole mount applications. 5000K color temperature. 50,000 hours of life. Twist-lock photo control included. 120 volt AC, 60Hz. cULus listed for wet locations. Energy saving utility light used for a large area. 10,000 Lumens, lasts up to 50000 hr. Energy efficient - uses only 125 W. Glue-bond cloth backing coated with tough, durable, long lasting, aluminum oxide abrasive for production and maintenance jobs. Use for hand sanding wood, metal, painted surfaces, plastic, fiberglass, and more.
3M 05026 Sanding Roll 3M 05030 Sanding Roll
Glue-bond cloth backing coated with tough, durable, long lasting, aluminum oxide abrasive for production and maintenance jobs. Use for hand sanding wood, metal, painted surfaces, plastic, fiberglass, and more. Glue-bond cloth backing coated with tough, durable, long lasting, aluminum oxide abrasive for production and maintenance jobs. Use for hand sanding wood, metal, painted surfaces, plastic, fiberglass, and more.
   
 
1