Home > ELECTRICAL > LIGHTING & CEILING FANS > LIGHT FIXTURES
Choose a sub category:
EXIT / EMERGENCY LIGHTS PUTTY KNIVES CHANDELIERS
WALL & MOLDING SCRAPERS FLOOR SCRAPERS & BLADES LIGHTING - PENDANT
LIGHTING - WALL MOUNT RAZOR SCRAPERS & BLADES GLAZING TOOLS
LIGHTING - CEILING ADHESIVE SPREADERS LIGHTING - BATHROOM
LIGHTING - CLOSET BATTERY INTERIOR LIGHTING LIGHTING - PORCH
PORCH - MOTION CONTROLLED BATTERY PORCH LIGHTING LIGHTING - OUTSIDE
POST LIGHTING FLOOD / SECURITY LIGHTING BATTERY OUTDOOR LIGHTING
DUSK TO DAWN AREA LIGHTING LIGHTING - RECESSED LIGHTING - TRACK
LIGHTING - UTILITY PHOTO CONTROLS AND ACCESSORIES LAMPS
LED CEILING FIXTURES PROPANE LIGHTING
Sort By:
1
Homax 40-00031 Adhesive Spreader Knife With 3/32 in Notch Homax 32 Adhesive Spreader Knife With 1/8 in Notch Homax 33 Adhesive Spreader Knife With 3/16 in Notch
Heavy-duty, solvent-proof, resists softening and wear. Durable and lightweight. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; and 1/4" for ceramic floor tile. No.31 - For vinyl flooring and floor tile. No.32 - For carpet and vinyl tile. No.33 - For wall tile and tile board. No.34 - For ceramic floor tile. Heavy-duty, solvent-proof, resists softening and wear. Durable and lightweight. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; and 1/4" for ceramic floor tile. No.31 - For vinyl flooring and floor tile. No.32 - For carpet and vinyl tile. No.33 - For wall tile and tile board. No.34 - For ceramic floor tile. Heavy-duty, solvent-proof, resists softening and wear. Durable and lightweight. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; and 1/4" for ceramic floor tile. No.31 - For vinyl flooring and floor tile. No.32 - For carpet and vinyl tile. No.33 - For wall tile and tile board. No.34 - For ceramic floor tile.
Homax 34 Adhesive Spreader Knife With 1/4 in Notch Marshalltown 977 Notched Spreader Marshalltown 978 Notched Spreader
Heavy-duty, solvent-proof, resists softening and wear. Durable and lightweight. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; and 1/4" for ceramic floor tile. No.31 - For vinyl flooring and floor tile. No.32 - For carpet and vinyl tile. No.33 - For wall tile and tile board. No.34 - For ceramic floor tile. Made of galvanized material to prevent rust. Ribbed blade for rigidity and strength. Use on asphalt tile, linoleum and vinyl. 1/16"W x 1/16"D x 1/16"H notches. Made of galvanized material to prevent rust. Blade is ribbed for rigidity and strength. Use for ceramic wall tile.
Homax 82 Adhesive Spreader Knife With 1/8 in Notch Homax 81 Adhesive Spreader Knife With 3/32 in Notch Homax 84 Adhesive Spreader Knife With 1/4 in Notch
Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile. Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile. Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile.
Homax 85 Adhesive Spreader Knife With 3/8 in Notch Homax 83 Adhesive Spreader Knife With 3/16 in Notch Marshalltown 6286 Notched Spreader
Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile. Reinforced handle and trowel design for strength. Beveled edges and notched blade sides for easy corner access. Heavy-duty, solvent-proof, resists softening and wear. 3/32" size for vinyl flooring and floor tile; 1/8" for carpet and vinyl tile; 3/16" for wall tile and tile board; 1/4" for ceramic floor tile; and 3/8" for heavy ceramic tile. Multi-use spreader/scraper. Won't rust or corrode. Each side of spreaders has a different notch size. Made in the U.S.A. Sizes: 3/16 , 1/4 , 1/8 'V', and Tapered Edge.
Marshalltown 6287 Notched Spreader Cooper S1174W-SP Ceiling Receptacle Lampholder Marshalltown 6263 Notched Trowel
Multi-use spreader/scraper. Won't rust or corrode. Each side of spreaders has a different notch size. Made in the U.S.A. Sizes: 1/16; 1/4 ; 1/8 , 1/4 x 1/8. Molded of high-temperature, thermoset plastic. Mounts on 4" outlet boxes with breakout for 3.25"  box mounting. 4 top wire screws. Terminal screws backed out. Meets all UL 496 requirements. 250 volt, 660 watts. Angled for right- or left-hand use. Used to spread adhesive or mastic on the base surface before laying tile, carpet, or other floor coverings. Color-coded by notch size for easy identification.
Marshalltown 6275 Notched Trowel Marshalltown 6261 Notched Trowel Eagle 604-SP Ceiling Receptacle Lampholder
All plastic blade is angled for both right and left handed users. Used to spread adhesive or mastic before laying tile, carpet, or other floor coverings. Color coded for easy identification. Angled for right- or left-hand use. Used to spread adhesive or mastic on the base surface before laying tile, carpet, or other floor coverings. Color-coded by notch size for easy identification. Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.
BLADE RAZOR W/DISPENSER 10 PC Allway SEB10 Single Edge Razor Blade Marshalltown 6262 Notched Trowel
.009" thick, industrial quality. Neon plastic dispensers. Includes 5 per pack Angled for right- or left-hand use. Used to spread adhesive or mastic on the base surface before laying tile, carpet, or other floor coverings. Color-coded by notch size for easy identification.
Mintcraft JL-BD-203L Safety Scrapers Hyde Tools 13000 Delta Razor Blade Scrapers Allied Moulded LH Keyless Lamp Holder With Terminal Screw
Removes paint, paper, and dirt from mirrors, windows, tiles, glass, etc. Chrome plated steel construction. Includes 5 SK5 alloy steel blades. .3mm thickness. Removes coatings, paint, and stickers from glass, mirrors, or windshields. Blade held offset at 5 degrees to ease scraping and extra-firm clamp holds blade under scraping pressure. Built-in 1/16" sash guide maintains paint/glass seal. Blade track design minimizes clogs and gum-ups for positive blade extension and safe retraction. Rib-reinforced body, crimped and welded to eliminate bending, pinching, and spreading. Large ribbed control button and longer handle for safety. Ergo-engineered, fits fist for better grip and control. Large hang hole for storage. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed.
Stanley 28-510 Razor Blade American Safety 66-0454 Wide Scraper Blade Hyde Tools 13110 Razor Blades
Steel-backed high carbon steel blade fits all standard razor blade tools. Replacement blades for Stanley 28-100 and 28-500 scrapers. Heavy duty carbon steel. Fits wide blade scraper tool and other 4" scraper tools. 0.009" thick, industrial quality steel. Use in razor blade scrapers, razor knives, wallcovering knives, and vinyl knives. Oiled to prevent rusting, and individually wrapped for safety.
Mintcraft 38520 Razor Blade Scrapers Marshalltown 6238 Notched Trowel American Line 66-0445 Window Scraper With 5 Blades
All metal with retractable blade. Single edge blade included. Flat V notched pattern with 10 degree cutback. Used to spread adhesive or mastic before laying tile, carpet, or other floor coverings. Black plastic handle with full hardened steel blade. All metal with brass carrier. 3 positions with safe scraping stop. Contour design.
Hyde 13050 Retractable Razor Scraper Powerzone 30000-3L Recessed Light Bar Hanger Stanley 28-500 Razor Blade Scraper With 5 Blades
Removes coatings, paint, and stickers from glass, mirrors, or windshields. Blade held offset at 5 degrees to ease scraping and extra-firm clamp holds blade under scraping pressure. Built-in 1/16" sash guide maintains paint/glass seal. Blade track design minimizes clogs and gum-ups for positive blade extension and safe retraction. Rib-reinforced body, crimped and welded to eliminate bending, pinching, and spreading. Large ribbed control button and longer handle for safety. Ergo-engineered, fits fist for better grip and control. Large hang hole for storage. Two piece hanger bar for 24" maximum joist spacing. Made of steel with a galvanized finish. Removes paint, glue, putty or adhesives from glass, tile, walls, floors or other smooth surfaces. Blade retracts for safe storage. Uses standard single edge razor blades.
Stanley 28-593 Window Scraper Toolbasix PT-130273L Plastering Trowels Toolbasix PT-150063L Notched Trowels
For scraping paint from windows, mirrors, tiles and other flat surfaces. Uses No.11-921 utility blade. Carbon steel with poly foam handle. Notched trowels for the professional tile setter. Use for leveling, aligning cabinets, wallpaper borders, floors and wall tiles, walls and partitions.
Mintcraft PT-150103L Notched Trowels Toolbasix PT-150093L Notched Trowels Allway GS Safety Glass Scraper
2 sides: 1/16" x 1/32" x 1/32" and 3/32" x 3/32" x 1/8" 2 sides: 1/16" x 1/32" x 1/32" and 1/16" x 1/16" x 1/16" Intermediate safety blade position keeps the blade from sliding out while in use. Includes 5 blades.
M-D Building 49100 Economy Tile Installation Trowel M-D Building 49108 Economy Tile Installation Trowel M-D Building 49104 Economy Tile Installation Trowel
Contains ergonomic TPR handle and notches for specific tile sizes. Contains ergonomic TPR handle and notches for specific tile sizes. Contains ergonomic TPR handle and notches for specific tile sizes.
M-D Building 49102 Economy Tile Installation Trowel Allway GTS Glass/Tile Scraper Homax 86 Adhesive Spreader Knife
Contains ergonomic TPR handle and notches for specific tile sizes. Uses WSB (Orgill SKU# 472.8705) blades. Push-button opening and locking action. Soft grip handle. Works with all caulking guns and cartridges. For cove base, paneling, flooring, ceramic tile, quarry tile, mirror tile, foam insulation board, tub kits, parquet flooring, carpet seams and edges, or wood molding. Applies 11 continuous thick or thin beads. Duct tape over nozzle holes to control the number of beads. Bead varies with pressure, speed and angle of application. For horizontal, vertical or overhead areas. Nozzle rotates to reach into corners and obstructed areas. Provides thick bead when holes are up, thin bead when holes are down. Can be resealed for future use while still on cartridge. Nozzle fits most standard 11oz and 30oz cartridge application guns. 3 inches wide.
Eagle 659-SP Ceiling Receptacle Lampholder Arrow Hart 669-SP Lampholder with 2 Wire Outlet Arrow Hart S865W-SP Lampholder with 2 Wire Outlet
Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts. With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts. Meets all UL 496 requirements. Molded of high-temperature, thermoset plastic to prevent discoloration and reduce breakage. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain, includes ball chain, 3' of cord, connector and end bell. Terminal screws backed out, ready for wiring without removing interior. Push wire terminals are top wired with two push-in terminals and two screw terminals for continuous wiring. Two piece version with 15 amp 125 volt, 250 watts AC 2P3W outlet, plastic.
Allied Moulded LH Lamp Holder Cooper 667-SP Ceiling Receptacle Lampholder Hyde Tools 13080 Glass Gator Glass Scrapers
Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed. With 15 amp 125 volt AC outlet. High-strength insulator porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. Pull chain socket interior is removable. Includes ball chain, 3' of cord, connector and end bell. Terminal screws are backed out ready for wiring without removing the interior. Dust ring protects against plaster and dirt. UL 496 Listed, NOM Certified, meets CSA requirements. 15 amps, 125 volt, 660 watts. Removes coatings, paint, and stickers from glass, mirror, or windshields. Retractable blade with positive lock. Rugged polystyrene construction with built-in scraping guide for clean edges and maintaining paint/glass seal. Uses Hyde No.42115 utility blades. Blade fits Orgill sku (657.5583) scraper.
Boston Harbor 4402H-23L Wall Lantern Arrow Hart S759W-CD-SP Lampholder Powerzone TM5 Open Recessed Light Fixture Trim
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed. Molded of heat and impact resistant plastic to prevent discoloring and reduce breakage. Mount on 4" outlet and have breakouts for 3-1/4" boxes. Mounting screws included. Terminal screws, staked and backed out for wiring without removing interior. Socket permit interior replacement. Dust ring protects against plaster and dirt. Include short length of ball chain, connector, 3' of cord and end bell. With shade groove. 250 volt, 250 watts. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM12 Open Recessed Light Trim Cooper LZR000212P Mini Track Light Connector Powerzone TM9 Open Recessed Light Trim
Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings. For joining two sections end-to-end. Easy to install. Takes one medium base bulb, (not included). 8" diameter open trim for use with 6" Non-IC housings.
MOUNT LIGHT PIER 15IN GL WHITE Cooper GU24W-SP Keyless Lampholder Powerzone TM3 Open Baffle Trim
Cast aluminum. For outdoor post lantern. 5-1/2" W x 5-1/2" D x 3-1/8" H. Molded of high-temperature, thermoset plastic. Mounts on 4" (101.6mm) outlet box with knockouts for 3.25" (82.5mm) box mounting.  Comes with 6" pigtail leads that are 221 degrees F (105 degrees C) insulated standard number 18 AWG wire, stripped 0.75" (19.0mm). 660 watts, 250 volts AC. ROHS compliant. File E7182, cULus, Evaluated to UL496. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed.
Powerzone TM2 Open Baffle Trim Powerzone TM6 Open Baffle Trim Boston Harbor W15BK01-33883L Jelly Jar Porch Light Fixture
Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Diameter of 7", white trim with baffle for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, (not included). cULus Listed. Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
Powerzone ORFL10506 Floodlight Kit Mintcraft 14082-5 Safety Scrapers Hyde 33250 Glass Scraper
Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed. Removes wallpaper, vinyl, wall cloth and resilient tile. Cleans floors, glass and tile. Retractable blade. Plastic handle with soft grip. Use to remove coatings, paint and stickers from window glass. No tools required to replace blade. Rugged acetal construction resists most paint thinners. 1 blade included.
MOUNT LIGHT PIER 15IN MAT BLK Boston Harbor W15WH01-33883L Jelly Jar Porch Light Fixture Halo 301P Open Recessed Light Trim
Cast aluminum. For outdoor post lantern. 5-1/2" W x 5-1/2" D x 3-1/8" H. Lantern with clear jelly jar design glass shade. 4-1/2" diameter x 8-1/8" height x 5-3/4" base extension. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed. Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381) and SHALLOW H27T (989.1672). Sleeved.
Boston Harbor HV-66919-BK3L Jelly Jar Porch Light Fixture American Safety Razor 65-0002 Smartedge Wall Scrapers Allied Moulded LH Lamp Holder With Grounded Outlet
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed. Wide blade with ergonomic handle for heavy duty wall, glass & tile applications. Slide out blade storage in the handle. Includes 1 Blade. Bi Material handle for comfort. Thumb recess provides comfortable leverage point. Hang Hole for storage. Design allows for quick and easy blade changes. Made of UV and heat resistant thermoset material (Urea). Nickel-plated brass screw shell. 250 volts/660 watts maximum. Includes corrosion resistant steel hardware. cULus Listed.
Boston Harbor HV-66919-PB-3L Jelly Jar Porch Light Fixture Mr Heater 20381 Burner Head Boston Harbor HV-66919-WH-3L Jelly Jar Porch Light Fixture
Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed. For use with indoor gaslights. Replaces broken burner head or can be used with soft mantle F220353 and gasket 20339 to convert light from pre-formed mantle to soft mantle. Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.
Halo 401P Open Recessed Light Trim Dorcy 41-1077 Portable Push and Light With Battery American Safety Razor 66-0089DIS American Line Razor Blades
Open recessed  trim ring, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), and SHALLOW H27T (989.1672). H7RT (942.0381). Sleeved. Dorcy Push and Light, Portable, 1.5 V, LED Bulb, 6 Bulbs, 5 ft Beam Distance, 24 lumens, 18 hr Average Life, Alkaline Battery, AA Battery, 4 Batteries, Press Top Lense Switch, Plastic Body, White Body, 5.51 in Overall Length, 5.51 in Overall Width, For Indoor/Outdoor Applications High-carbon surgical steel Duro Edge blades with non-rust aluminum back. Each blade protected in shelling paper. Drawer box for easy storage.
LIGHT LUNA TAP                Area Lighting CPGI-ALR-LC-120 Photocontrol Coleman Cable 0430 Yard Master Floodlights
Two stage dimmer, 20 lumens. Uses 4 AA batteries (not included). Secure keyhole mount and drywall anchor included. Residential grade electrical component. Clear polycarbonate housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. UL and CSA listed, ANSI C136.10 compliant. High impact, weather resistant. Green plastic. 18/2 SJTW 8' green cord. Wall mount and ground stake included. 120 volt, uses 150 watt maximum, par 38 bulb, not included.  Polybagged. UL Listed.
LIGHT JELLY JAR SATIN NICKEL  LIGHT PORCH FLUSHMOUNT BRS NIC M-D Building 20051 Tile Installation Trowel
Uses one medium base bulb, 60 watt maximum, (not included). 7-1/2" height x 4-1/2" width x 5-3/8" extension. cULus Listed. Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed. Angled blade, comfortable TPR handle, notch specification stamped on blade.
M-D Building 20058 Tile Installation Trowel M-D Building 49038 Tile Installation Trowel M-D Building 20056 Tile Installation Trowel
Square notch, comfortable TPR handle, notch specification stamped on blade. Contains ergonomic TPR handle and notches for specific tile sizes. Angled blade, comfortable TPR handle, notch specification stamped on blade.
M-D Building 20057 Tile Installation Trowel M-D Building 20061 Tile Installation Trowel M-D Building 49112 Tile Installation Trowel
Square notch, comfortable TPR handle, notch specification stamped on blade. Angled blade, comfortable TPR handle, notch specification stamped on blade. Contains ergonomic TPR handle and notches for specific tile sizes.
M-D Building 49110 Tile Installation Trowel M-D Building 49116 Tile Installation Trowel M-D 30000 Notched Trowel
Contains ergonomic TPR handle and notches for specific tile sizes. Comfortable TPR handle, notch specification stamped on blade. Designed for contractors. TPR handle.
Cooper 545B-BOX Lampholder Halo 300P Open Recessed Light Trim Rite Lite LPL595S Light Closet Push With Pull String
For pole barns. Open recessed  trim ring, 7-1/4" OD, 3-7/8" ID, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7ICT (552 4277), H71CAT (854 3951), H7RIC (025 9697). Sleeved. Super bright warm LED. On/off operation, press or pull string once for full brightness, a second time to turn the light off. Screw mount bracket. Uses 3 AA batteries.
Powerzone TRIM201-BK (MTM2) Baffle Trim Area Lighting CPGI-ALR-AA-305 Post Security Photocontrol AmerTac 758CTC-4 Dusk to Dawn Post Eye Light Control
For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 300 watts, direct-wire. UL and CSA Listed. Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, mercury vapor and sodium bulbs. Includes: 6" leads, 5/8" diameter. Maximum load tungsten: 15A, 1800 watts. Maximum load ballasted: 1100 VA, 9.1A. 2.95" x 2" x 1.7".
Halo H7ICT Recessed Housing Area Lighting CPGI-ALR-PL-120S Photocontrol Area Lighting CPGI-ALR-AA-105 Post Collar Photocontrol
For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. Electrical components polycarbonate. Compact screw-in control for up to 150 watt incandescent, CFL, LED and halogen lamps. Electrical components and ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts, direct-wire. UL and CSA Listed.
Area Lighting CPGI-ALR-LC-208-2 Thermal Bimetal Photocontrol Halo 5000P Open Splay Trim AmerTac 758M Post Eye Light Control
Electrical components. Noryl housing. Replacement photocontrol for Mercury Vapor and/or High-Pressure Sodium luminaires. 1,000 watts. Heavy-duty thermal bimetal switch. 30 - 45 second time delay. Fail mode is on. 240 volt with a range of 185 - 305 volts. UL and CSA listed, ANSI C136.10 compliant. Diameter of 6-1/2", white trim for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). Hardwired photocell control, post eye control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. 500 watt.
AmerTac OLC5CFLBC-4 Dusk to Dawn Floodlight Control Photocell Halo 70PS Recessed Light Shower Trim Halo H7ICAT Recessed Housing
Outdoor dusk to dawn floodlight light control for Halogen/CFL/LED bulbs. Long stem design fits inside most flood lights, spot lights or enclosed exterior fixtures. Turns compact fluorescent, LED, halogen and incandescent bulbs on at dusk, off at dawn. 150 watts maximum. Plastic housing, 4.3" x 3.35" x 3.35". Wet location and AIR-TITE listed white trim with frosted Albalite Lens. 8" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (284.2474), H7RT (942.0381), and SHALLOW H27T (989.1672). Sleeved. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 1" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.
Coilex Halo 310P Baffle Trim Powerzone TRIM201-WH (MTM1) Baffle Trim AmerTac LC120BC-4 Dusk to Dawn Twist Lock Light Control
Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). For mercury vapor, sodium and LED bulbs. Bi-metal switch with 3-prong twist lock plug. Plastic housing. Maximum load tungsten 8.3A, 1000 watts. Maximum load ballasted: 1800 VA, 15.0A. Outdoor, wire-in connection. 2.55" x 3.65" x 3.65".
Cooper LZR000200P Track Live-End Feed HOUSE WASH HOSE END SPRAY 64OZ Cooper LZR000202P Laser Track Floating Canopy Feed
With junction box cover. For starting a run at the beginning of track mounted to a junction box. For use with Lazer track only. Removes stains caused by dirt, mold, mildew and algae. Cleans wood, vinyl and brick siding with no scrubbing. Reaches the second story. Connect to an existing electrical box located anywhere along the track. Comes with canopy cover, connector, dead end and mounting hardware.
Powerzone TRIM205-WH (MTM4 Eyeball Recessed Light Trim Halo H750ICAT Recessed Housing Halo H750RICAT Remodel Recessed Housing
For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included). For use with Halo H7 LED 600 Series and 900 Series LED modules. Rated for direct contact with air-permeable insulation in insulated ceilings, may also be used in non insulated ceilings. Air-tite fixture sealed and gasketed to prevent airflow between unconditioned areas and living areas. Rated for 15 watts maximum. 10-1/2" length x 7-1/2" width x 7-1/2" height with 1/2" plaster lip. Ceiling cutout: 6-1/2". For use with Halo H7 Collection 600 900 Series LED modules, designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. AIR-TITE housing design prevents airflow between attic and living areas. Single wall aluminum housing. Installs from below the ceiling in 1/2" or 5/8" ceiling material (may also be used in non insulated ceilings). Quick Connect wiring connectors included in junction box. Rated for 15 watts maximum. 13-1/4" length x 6-7/8" width x 7-1/2" height. Ceiling cutout: Match template supplied with housing - 6-1/4" typical.
Westek AT15BC-4 Dusk to Dawn Stem Mount Light Control Coilex Halo 310W Baffle Trim Powerzone TRIM205-BN (MTM5) Eyeball Recessed Light Trim
Hardwired photocell control. Turns light on at dusk and off at dawn. Plastic housing. For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, bi-metal switch and hardware for 1/2" pipe; 3-wire. Maximum load tungsten: 16.6A, 2000 watts. Maximum load ballasted: 1900 VA, 15.8A. 4.5" x 2.8" x 2.35". Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RIC (025.9697) and SHALLOW H27T (989.1672). Sleeved. For 4" recess light. E27 socket. Use R20/PAR20, maximum 50 watt bulb, ( not included).
Area Lighting CPGI-ALR-SPT-15 Thermal Bimetal Photocontrol Mintcraft 16110-1/16" Notched Trowels Mintcraft 16110 Notched Trowels
Polycarbonate housing, provides a 30-45 second time delay that virtually eliminates unwanted lamp cycling caused by lightning, car headlights, or other sudden changes in the ambient light level. The turn on level is pre-set at the factory, but an adjustable slide bar allows field adjustment to satisfy specific needs. Equipped with a swivel base to provide maximum installation flexibility. 120 volt, with a range of 105-130 volts, 2000 watts load rating tungsten, 1900 watts load rating ballast. Fail mode is on. UL and CSA Listed. Hardened and tempered high-carbon steel. Lightweight aluminum alloy mounting. Ultra-smooth camel back wood handle. For cement or adhesives. Hardened and tempered high-carbon steel. Lightweight aluminum alloy mounting. Ultra-smooth camel back wood handle. For cement or adhesives.
Coilex Halo 410W Baffle Trim Powerzone TM4 Open Baffle Trim Area Lighting CPGI-ALR-TL-115 Swivel Mount Photocontrol
White trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815) and H7RT (942.0381). Diameter of 7-1/4", white trim with reflector for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, R-30, 75 watt maximum, (not included). Electrical components ultraviolet stabilized polycarbonate. Thin-line outdoor control with swivel base. 1,800 watts. Fits between dual floodlights. UL and CSA Listed.
Moldex 7030 Instant House Wash Halo H5ICAT Recessed Housing Cooper LZR000203P Track Light L-Connector
Removes tough stains from mildew mold, algae, fungus and moss. Restores the original look to wood, vinyl, brick and stone siding. Formulated with Advanced Bleach Gel formula that removes unwanted stains deep below the surface. Active Cling technology allows powerful cleaning agents to remain or hold onto the vertical surface. Phosphate free. Covers up to 4,000 sq ft. For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated. To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers.
Mr. Heater F220351 Preformed Mantle Boston Harbor F98WH02-12643L Square Ceiling Fixture Area Lighting CPGI-ALR-PT-15 Direct Wire Switch Photocell
Replaces broken preformed mantles, or can be used with ceramic burner head 20338 and gasket 20339 to convert light from soft mantle to preformed mantle. Fits Paulin gas lights. White square design glass shade. 11-1/4" length x 11-1/4" width x 5-1/4" height. Uses two clear, medium base bulbs, 60 watt maximum (not included). For high wattage light fixtures up to 2,000 watts. Moveable control bar provides on-site adjustment for turn-on/off times. 120 volt, 50/60 Hz. UL and CSA Listed.
AmerTac SW103CTC-4 Dusk to Dawn Swivel Eye Light Control Powerzone TRIM201-BN (MTM3) Baffle Trim Boston Harbor RF-F-013-PB-3L Ceiling Fixture
For incandescent, fluorescent, LED, mercury vapor and sodium bulbs. Includes: 6" leads, 1/2" diameter neck and hardware, 3-wire. Plastic housing. 15 amp, 1800 watts maximum load tungsten. 1100 VA, 9.1 amp maximum load ballasted. Wire-in connection. 4.25" x 2.1" x 2.1". UL Listed. For use with 4" recessed lights. E27 socket. Use R20/PAR20 maximum 50 watt bulb (not included). Clear floral glass shade. 5-3/8" diameter x 7" height. Uses one clear medium base bulb, 60 watt maximum, (not included). cULus Listed.
Cooper C386 Closet Light Halo 5001P Splay Baffle Trim Bell 5792-0 Portable Spike Light
Automatic switch turns light on when door opens, shuts off when door closes. Hinged and sliding doors. Ivory color.  SPT-1 cord with plug. Baffle, white trim. Diameter of 6-1/4" for use with 5" incandescent rounds. Non-insulated or insulated housings. 75 watt maximum. Bulb sold separately. For use with 5" housings: Halo model numbers (Orgill SKU numbers), H5T (424.1535), H5ICAT (651.3956) and H5RT (635.6182). Locking swivel knuckle for positive lamp positioning and pin-point directional aiming. Die cast construction, powder coat finish. For 75-150 watt maximum, Par-38 type lamps, (not included). 15 amp/125 volt, 3 wire cord set included. Does not include mounting plate. Gray color. cULus Listed. Shrink wrapped.
Area Lighting CPGI-ALR-AA-105W Post Collar Photocontrol Area Lighting CPGI-ALR-OLC-5C Photocontrol Halo H7 Recessed Housing
Electrical components ultraviolet stabilized polycarbonate. For control of porch lights or outdoor floodlights. 1,800 watts. Black photo cell, brushed aluminum plate. UL and CSA Listed. Designed to control outdoor Par-38 flood or spotlights for dusk-to-dawn security lighting for driveways, entranceways, and patios. 120 volt with a range of  105-130 volts, 150 watt tungsten load rating. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp posting. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span and can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated.
Boston Harbor F3BB01-33753L Ceiling Fixture Boston Harbor V89WH01-4411H3L Bracket Base Boston Harbor F13BB01-68583L Ceiling Fixture
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed. White glass shade. 7-1/2" height x 4-1/2" width x 4-1//8" base extension. Uses white, medium base bulbs, 60 watt maximum, (not included). cULus Listed. Frosted white ribbed glass shade. 7-1/2" diameter x 4-7/8" height. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
Boston Harbor F3WH01-3375W-3L Ceiling Fixture Hyde 13135 Single Edge Razor Blade Powerzone RS2000R (MCN2) Recessed Light Fixture
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed. 0.009" thick, industrial quality steel. Use in razor blade scrapers, razor knives, wallcovering knives, and vinyl knives. Oiled to prevent rusting, and individually wrapped for safety. Non-IC housing, not for direct insulation contact; remodel housing applications. 4" downlight with E27 socket. Use R20/PAR20 50 watt maximum, (bulb not included).
Boston Harbor F3BB01-34083L Ceiling Fixture Halo H7 Remodel Recessed Housing Marshalltown 971 Notched Trowel
Clear ribbed glass shade. 5-7/8" diameter x 7-1/4" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed. Can be installed below the ceiling. For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket allows the use of different lamp types and sizes as well as proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Installation: 7-1/2" height allows use in 2 x 8 joist construction. Four remodel clips secure housing and accommodate ceiling thickness from 3/8" to 5/8". Requires ceiling opening per template. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. Used to spread adhesive or mastic on the base surface before laying tile, carpet, or other floor coverings. Notch style and size help to control depth and amount of adhesive applied. Aluminum mounting attached to a hard tempered steel blade, straight, smooth wood handle.
Marshalltown 973 Notched Trowel Marshalltown 972 Notched Trowel Boston Harbor F13BB01-68623L Ceiling Fixture
Use to spread adhesive or mastic on the base surface before laying ceramic floor tile. Notch style and size help to control depth and amount of adhesive applied. Aluminum mounting attached to hard-tempered steel blade. Straight, smooth wood handle. Use to spread adhesive or mastic on the base surface before laying linoleum, vinyl, or asphalt tile. Notch style and size help to control depth and amount of adhesive applied. Aluminum mounting attached to hard-tempered steel blade. Straight, smooth wood handle. Frosted white ribbed glass shade. 7-1/2" diameter x 4-7/8" height. Uses one medium base bulb, 60 watt maximum, (not included). cULus Listed.
Siamons 126-056 Concrobium House And Deck Wash SWITCH WRC                    LIGHT LED WRC
Removes dirt and grime from exterior surfaces. Contains no bleach or other harmful chemicals and is plant-friendly. 68 oz jug cleans up to 2500 sq ft depending on the surface and surface absorbency. RF technology works through walls. Auto shut-off timer. 2 AAA batteries (not included). Up to 20 remote control lights can be linked to this switch. Operates up to 60 feet and automatically shuts off the lights if they are inadvertently left on. Use alone or with wireless remote control LED lighting system. 35 lumens. 3 AA batteries (not included). Operates on its own or as an expansion to the wireless remote control lighting system. It can be paired with 19 other lights on the same remote switch.
Halo H5T Recessed Housing Halo LZR102P Miniature Linear Laser Track Light System LIGHT CEILING 1LT PULLCHAIN PB
For installations in non-insulated ceilings or where insulation can be kept 3" from housing. Integral thermal protector guards against misuse of insulation materials and improper lamping. Socket snaps into trim for consistent lamp positioning. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief.  Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/2" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. CSA Certified. IP Rated. Overall height is 9/16" and the track has a decorative reveal at the ceiling line. It accepts both Lazer Track lampholders and Halo Power-Trac lampholders. Connectors push into the ends of the track. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
Boston Harbor V5BB03-3L Vanity Bar Fixture Boston Harbor F13CH01SW-6859CL3 Ceiling Fixture American Safety Razor 66-0210 American Line Razor Blade Dispenser
Vanity bath bar light, 18", uses medium base bulbs, 100 watt maximum (not included). cULus Listed. Clear and white prismatic glass shade. Polished chrome finish. 6-3/4" diameter x 4-3/8" height. Uses one clear, medium base bulb, 60 watt maximum (not included). cULus Listed. Transparent plastic spring loaded safety dispenser with used blade vault on a blister card. 10 blades in dispenser.
Halo 30WAT Super Recessed Light Fixture Trim Boston Harbor F301-3375-ORB Ceiling Fixture Powerzone 30002WH3L Recessed Light Fixture
Self flanged socket supporting super trim AIR-TITE metal baffle with torsion spring construction, makes installation air-tite regardless of housing used. Prevents airflow between attic and living areas. 7-1/4" OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers), H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381) and H7RICT (025.9697). White trim, white baffle, white reflector. Sleeved. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed. Non-IC housing, 5" mini can with 7" white open trim. Built-in thermal protection. Prewired housing and electrical box. Takes PAR30 or R30 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed.
Hyde 13138 Single Edge Razor Blade Marshalltown 15672 Notched Trowel Boston Harbor F13WH01-68543L Round Ceiling Fixture
0.009" thick, industrial quality steel. Use in razor blade scrapers, razor knives, wallcovering knives, and vinyl knives. Oiled to prevent rusting, and individually wrapped for safety. Aluminum alloy mounting riveted to a hard tempered steel blade. Soft grip handle for extra comfort and grip. Round ceiling fixture. Opal glass shade. Uses medium base bulb, 60 watt maximum or 13W CFL bulb, (not included). cULus Listed.
Hyde Tools 13125 Razor Blades LIGHT LED SENSOR BRONZE       LIGHT LED SENSOR WHITE
Blades are packaged in a reusable dispenser. Industrial quality steel. .009" thick. Oiled to prevent rusting. Individually wrapped for safety. Includes 100 pieces. Adjustable, detachable. 24 lumens, 3 AA batteries (not included). Includes a swiveling panel which aims light wherever needed, and a motion sensor. Adhesive strip and mounting bracket to install anywhere. It detaches from the back plate for handheld use. Adjustable, detachable. 24 lumens, 3 AA batteries (not included). Includes a swiveling panel which aims light wherever needed, and a motion sensor. Adhesive strip and mounting bracket to install anywhere. It detaches from the back plate for handheld use.
LIGHT SOFTGLOW SENSOR BRONZE  Boston Harbor TL-TB-170-WH3L Flexible Table Lamp Halo 78P Eyeball Recessed Light Trim
Weatherproof, outdoor/Indoor. Motion-sensitive 4-LED soft glow sensor light. 15 lumens, 3 AAA batteries (not included). Lampholder On/Off switch. Uses 60-watt maximum A-19 bulb (not included). Adjustable 16-1/2" overall height. Bullet style shade. cULus  Listed. Wet location and AIR-TITE listed white trim with white eyeball 30 degree Tilt, 360 degree rotation, 8 "OD, for use with 6" housings: Halo model numbers (Orgill SKU numbers): H7T (540.1815), H71CT (552.4277), H71CAT (854.3951), H7RT (942.0381), H7RICT (025.9697) and SHALLOW H27T (989.1672). Sleeved.
Boston Harbor TL-CL-170-BLACK33 Flexible Clip-On Table Lamp Powerzone 30001WH-3L Recessed Light Fixture Boston Harbor F3BB01-3375-BN Ceiling Fixture
Rotary lampholder On/Off switch. Uses 60-watt maximum A-19 bulb (not included). Adjustable 13" overall height. Bullet style metal shade. cULus Listed. Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
Cooper Lighting H7RICAT Recessed Lighting Housing Halo H99TAT Recessed Housing Powerzone T513WH-3L Eyeball Recessed Light Trim
Cooper Lighting Recessed Lighting Housing, 120 VAC, Incandescent Lamp, Insulated Insulation, 6-1/2 in Ceiling, 6 in Diameter, UL, cUL Listed, CSA Certified Air-tite fixture sealed and gasketed to prevent airflow between attic space and living areas. The inner housing can be removed from plaster frame to provide access to the junction box. For providing accent and task lighting in non-insulated ceiling or where insulation can be kept 3" from housing. Thermal protector deactivates fixture if overheating occurs due to improper lamping or misapplied insulation. Junction box has four 1/2" trade size conduit knockouts with true pry-out slots. UL/cUL Listed Damp Location, Wet Location, feed through covered ceiling with select trims and 1598 Luminaire. Certified under ASTM-E283 for air tight construction. Easy to install. Takes medium base bulb, R-30, 75 watt maximum, (not included). 8" diameter eyeball trim for use with 6" Non-IC/IC housings.
Powerzone RS6000R+TRIM603-W Recessed Light Kit Cooper LZR000208P Laser Track Light Cord/Plug Powerzone T505WH-3L Recessed Light Shower Trim
Use GU10, 50 watt maximum, (bulb included). Three wire 10' cord with grounded plug. Maximum capacity of 5 amps. Eight inch diameter drop lens trim for use with 6" Non-IC/IC housings. Easy to install. Takes 1 medium base bulb, A-19, 40 watt maximum, (not included).
Boston Harbor V5CH03 Vanity Bar Fixture Boston Harbor TL-TB-170-BK3L Flexible Table Lamp Heath Zenith HZ-5697 Dusk to Dawn Replacement Photo Control Twist Lock
Vanity bath bar light, 18", uses medium base bulbs, 100 watt maximum (not included). cULus Listed. Lampholder On/Off switch. Uses 60-watt maximum A-19 bulb (not included). Adjustable 16-1/2" overall height. Bullet style shade. cULus  Listed. For use with models 9270, 9272, 9274, 5650, 5653, 5656, 5660, and 5666. 3" diameter x 1.5" height.
Powerzone 30001BK-3L Recessed Light Fixture Boston Harbor W22BB01-2349ECD3L On/Off Wall Bracket Switch Heathco HZ-5690-AL Light Fixture Arm Extension
Non-IC housing, 5" mini can with 6" white open trim and baffle. Built-in thermal protection. Prewired housing and electrical box. Takes PAR16, PAR20 or R20 bulbs, 75 watt maximum, (not included). UL Listed for damp locations. cULus Listed. Frosted grape design glass shade. Uses one clear, medium base bulb, 60 watt maximum (not included). 4-1/2" diameter x 7-3/4" width x 4-7/8" base extension. cULus Listed. Aluminum, for use with models 5650, 5653, 5656, 5660, and 5666. 1.625" depth x 24" length.
Boston Harbor AL9002H-43L Lantern Porch Light Fixture Fulcrum 20043-301 Adjustable Detachable Motion Sensor Light LIGHT CEILING 1LT PULLCHAIN BN
Frosted glass globe. Will not rust or tarnish. Uses a medium base bulb, 60 watt maximum, (not included). 8-7/8" H x 6" W x 6-7/8" E. cULus Listed. Fulcrum Motion Sensor Light, Adjustable, Detachable, 100 W, 6 ft Sensing, LED Lamp, 0.24 W Lamp, 4 Lamps, Battery Power, 24, ABS, Silver, For Illuminating Dark Closets, Hallways and Staircases Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed.
Boston Harbor AL1037-53L Lantern Small Porch Light Fixture Boston Harbor F98WH02SW-1264H3L Ceiling Fixture Boston Harbor AL9002H-53L Lantern Porch Light Fixture
Clear beveled glass panels. Uses a medium base bulb, 60 watt maximum, (not included). Will not rust or tarnish. 8-5/8" height x 4-3/8" width x 6-1/8" extension. cULus Listed. White glass shade with pull chain. 11-1/2" length x 11-1/2" width x 5-1/2" height. Uses two clear, medium base bulbs, 60 watt maximum (not included). cULus Listed. Frosted glass globe. Will not rust or tarnish. Uses a medium base bulb, 60 watt maximum, (not included). 8-7/8" H x 6" W x 6-7/8" E. cULus Listed.
Boston Harbor F3WH01-33753L Ceiling Fixture Zenith SL-5408-GR-A Motion Sensor Floodlight Zenith SL-5408-BZ Motion Sensor Floodlight
Opal glass shade. 5-7/8" diameter x 7-1/8" height. Uses one clear, medium base bulb, 60 watt maximum, (not included). cULus Listed. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations. Test auto and manual modes, adjustable time delay, (10,5,1 minutes). Manual override at the light switch. Includes protective rubber gaskets for lampholders and round cover plate that adapts to existing electrical boxes. Adjustable infrared sensor range of up to 50 feet. Flood lights not included. Patented ScanGuard lens with protective hood to shield infrared lens from sun, rain and snow. Energy saving photocell. Adjustable floodlight fixtures. 110 degree detection zone. UL Listed for use in wet locations.
Zenith SL-5408-WH-A Motion Sensor Floodlight Hyde Value Adhesive Spreader Boston Harbor F98WH02-1266-3L Square Ceiling Fixture