Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > EXTENSION - FIBERGLASS
Sort By:
1
Loctite PL 200 Projects Construction Adhesive SPRING CLIP GREY 3IN          LOCK PIG TAIL
SPRING CLIP GREY 3IN
Our Price: $2.38
LOCK PIG TAIL
Our Price: $2.80
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in
ADHESIVE FOAMBOARD 10.3 OZ    PIN COUPLING W/COLLAR 1IN     WW Henry 440-004 Cove Base Adhesive
Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557. Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead.
Henkel 1498717 Greenseries Drywall/Panel Adhesive ADHESIVE WOOD/PANEL 10.3 OZ   Franklin 5342 Provantage Drywall Adhesive
Drywall & Panel Construction adhesive is best suited for bonding drywall to wood. Works well on foamboard, decorative panels, furring strips, concrete walls or drywall. Non-flammable, environmentally friendly, ultra low VOC, fast set, fast cure. GREENGUARD approved.  Meets LEED requirements. Not recommended for use on mirrors or underwater applications. Premium grade, high strength adhesive. Specifically formulated for decorative panel and modeling installation. An instant grab adhesive that delivers a precise vertical hold on wood, foam, and PVC trim ideal for decorative interior projects. Easy to gun in cold temp. A high-performance, formula specifically designed for installing drywall and paneling to most common building materials, including wood and metal. It offers excellent adhesion, reduces nail pops and provides a no-sag installation. Fills gaps in substrates, providing a more solid backup surface and reducing sound transmission. It is unaffected by moisture and resists aging, it will not become hard or brittle with age. Covers 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute a 1/4' bead. Exceeds the requirements of ASTM C557 and has been tested in accordance with E72 for racking and shearing.
Werner AC27-L Paint Cup Liner LOCK ARM SCAFFOLD 13IN        ADHESIVE DRYWALL 28 OZ
LOCK ARM SCAFFOLD 13IN
Our Price: $5.24
Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners. Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant. Premium grade adhesive specifically formulated for drywall installation. Prevents nail pops and helps limit air and sound movement between walls. Easy to gun adhesive that delivers a strong permanent bond. Instant grab. Exceeds ASTM C557
WW Henry FP00595005 Cove Base Adhesive WW Henry 440-005 Cove Base Adhesive WW Henry 440-034 Cove Base Adhesive
Installation of either rubber or vinyl cove base. Bonds rubber and vinyl cove base to concrete, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed or metal surfaces on all grade levels as recommend by the cove base manufacturer. Covers 90 lin. ft. per 30 oz. with 1/8" bead. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon.
Qualcraft 2501 Roofing Brackets Qualcraft 2502 Roofing Brackets Franklin 3402 Titebond Cove Base Adhesive
Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified. Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base.
Dap 25053 Weldwood Cove Base Adhesive Werner AC19 Extension Ladder Cover Werner AC27-P Lock-In Paint Cup
For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches. For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080).
Qualcraft 2500 Roofing Brackets Qualcraft 2504 Roofing Brackets Qualcraft 2505 Roofing Brackets
Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
Qualcraft 2503 Roofing Brackets GUARDRAIL 5FT                 GUARDRAIL 7FT
GUARDRAIL 5FT
Our Price: $12.10
GUARDRAIL 7FT
Our Price: $13.28
Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks. Meets ANSI, CSA and OSHA standards. Meets ANSI, CSA and OSHA standards.
Mintcraft Pro YH-CS001 Casters Staples 611F Tear Resistant Weather Resistant Ladder Mitt WW Henry 440-044 Cove Base Adhesive
For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity. Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon.
Werner PK76-3 Auto Closing Pail Shelf Werner PK76 2-Piece Pail Shelf Werner AC50-JB-3 Lock-In Job Bucket
Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included. Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included. Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation.
JACK ADJ LEVELLING GALV 24IN  GUARDRAIL POST W/WEDGE CLAMP  Dap 25054 Weldwood Cove Base Adhesive
With plate (hollow). Meets ANSI, CSA and OSHA. Meets ANSI, CSA and OSHA standards. For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel.
Werner AC96 Extension Ladder Stabilizer BRACE SCAFFOLD CROSS 7X4FTX1IN QualCraft 2481 Weather Resistant Ladder Hook With Wheel
Rectangular. For aluminum ladders of all duty ratings and fiberglass ladders with side rails up to 3"H x 1-3/16"W. Also fits Articulated ladder in scaffold or stairway use. Mar-resistant rubber caps protect work surface. Fits aluminum series extension ladders with rails up to 3-5/16" x 1-3/16", D716, D1100, D1200, D1300, D1500, D500 (20' to 24'), M and M1 Multi-Master ladders. Includes paint can hook, mounting hardware and instructions. Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved. Fits single or extension ladders in wood, fiberglass, and aluminum in round and "D" rung styles. Constructed of steel for strength, durability and safety. Adjustable to fit between top two ladder rungs.
TRAY BAKER TOOL               QualCraft 2201 Pump Jack Brace Werner AC52-UB Lock-In Utility Bucket
TRAY BAKER TOOL
Our Price: $28.93
For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in. Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions. Expands work surface and customizes ladder tops. For on the jobsite or household use. Locks securely into the ladder top. Can be used for wet or dry applications. Holds up to 1 gallon of liquid and has a 25 lb capacity. Integrated Lock-in System socket on the bucket allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312).
STABILIZER LADDER             BRACKET SIDE 20IN             Qualcraft 2210 Pump Jack Pole Anchor
STABILIZER LADDER
Our Price: $31.96
BRACKET SIDE 20IN
Our Price: $35.48
Fits extension and single ladders with rail up to 4? x 13/4?. Holds ladder 12? from wall and spans 48? to clear most windows. Stabilizers attach with 2 U-bolts and feature replaceable extra heavy duty rubber tips. Approx. Weight: 6 lbs. Meets ANSI, CSA and OSHA standards. Provides additional margin of safety and security when used according to instructions with light duty scaffolding system.
Qualcraft 2525 Roofing Brackets QuickClick AC78 Ladder Stabilizer QualCraft Corner Buddy Weather Resistant Ladder Stabilizer
Features six-position locking adjustments. Constructed of heavy duty galvanized steel. Has a capacity of one worker per 8' or staging. Can be repositioned and taken down without damaging shingles. 3-position replaceable tongue. For painting and home repair projects. Spring-loaded locking latch for quick installation and removal. Quick release attach pins connect stabilizer arms to body without tools. Non-marring rubber end caps protect work surface. For use on singles and extensions with 1-1/4" round rungs, 1-1/2" and 1-3/4" flat rungs. No tools required for assembly. 10" standoff from work surface. Designed for use on multi-surfaces, corners, flat, round and multi-dimensional construction. Eases access to gutters and downspouts during installation or repair and to soffits for electrical and siding applications. Can be used all around the house without having to remove from ladder. Easy connection, removal and storage. Powder coated in safety yellow for visibility, with rubber bumpers to protect building surfaces.
Loctite PL 300 Foamboard Adhesive Liquid Nails CB-10 Liquid Nails Cove Base Adhesive Liquid Nails DW-24 Liquid Nails Drywall Adhesive
Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. A water-resistant, latex-based construction adhesive with quick initial grab. Formulated to bond vinyl or rubber cover base and stair treads. No bracing required and easy water clean up. Covers 30 lin. ft. per 10.5 oz. cartridge. Reduces the need for fasteners up to 50-percent. Minimizes nail pops, buffers sound and speeds drywall installation. GREENGUARD Gold Certified.  Covers 88 lineal feet with full round 1/4" bead. Exceeds ASTM C-557.
Franklin 3401 Professional Cove Base Adhesive Werner AP Portable Type II Work Platform Loctite Power Grab Construction Adhesive
Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base. Non-marring feet provide slip-resistance and protect floor from damage. Provides a non-skid area for standing. Lightweight, easy to carry and set up. Convenient to store. Work comfortably along walls and windows. Ideal for painting. Dimensions: 39-1/2" x 12" top; 20-9/16" highest standing level. 41"H x 16-5/8"W x 35-3/4"D. High grab minimizes nailing requirements. Gap-filling. Bridges minor framing gaps. For paneling and drywall, molding, trim and corkboard. Low odor. GREENGUARD Children and Schools certified. Water resistant.
OUTRIGGER EXT 32IN            North American 53502 Work Platforms Mintcraft Pro YH-TR001-2 Outrigger
OUTRIGGER EXT 32IN
Our Price: $55.33
Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder coated textured finish for maximum corrosion resistance. Meets OSHA requirements. For painting. Features: safety locking legs and non-skid feet; slip resistant standing surface; lightweight and easy to carry, set up, fold and store; works comfortably along walls and windows. 20" standing height. 39" x 12" surface area. Yellow powder coated finish. Steel material. Casters not included. Dimensions: 18" H x 15-5/8" W. For use with SKU# 879.5478.
FRAME SCAFFOLD 60X60IN        QualCraft 2420 2-Rung Short Body Ladder Jack Henkel 1630096 Osi Drywall Adhesive
FRAME SCAFFOLD 60X60IN
Our Price: $60.84
Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. - 16 gauge. Perimeter tubes: outside diameter 1.625 in. - 13 gauge. Meets ANSI and OSHA Standards. MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements. Bonds gypsum board to wood metal studs, concrete or block walls. Eliminates nail pops, bridges minor framing gaps. Reduces fastener use, reduces sound transmission. Meets ASTM C 557-93A specifications.
Qualcraft 2200 Pump Jacks PLATFORM WORK TYPEII 225LB    Franklin 5352 Drywall Adhesive
Steel construction. Adjustable to any height up to 30'. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a Positive Double Lock System. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781. Slip-resistant surface. Easy-use locking hinge. Slip-resistant rubber feet. Height to platform 20?. Work Area: 11-7/8? x 37?. Bottom Width: 15-1/2?. Approx. Spread:  52-1/2?. Approx. Weight (lbs) 10. Approx. Cubes 1.7?. Designed for applying drywall to wood, hardboard, gypsum wallboard, cold-rolled steel and aluminum. Strong initial tack allows the panels to be positioned quickly without slipping. Fills irregularities and gaps in substrates, providing a strong bond and a more solid backup surface. Exceeds the ASTM C557 specification. Covers approximately 355 ft. using 1/8" bead 89 ft, using 1/4" bead, and 39 ft. using 3/8" bead.
Liquid Nails LN-604 Projects and Foamboard Adhesive Loctite PL 300 Foamboard Adhesive LADDER JACK SHORT-BDY ALU
LADDER JACK SHORT-BDY ALU
Our Price: $98.92
A high-strength, low-odor, latex-based construction adhesive for indoor use. Water resistant. Bridges gaps up to 3/8". GREENGUARD Gold Certified.  Covers approximately 32 lineal ft. using a 1/4" bead. Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. Span 2 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 14 lbs.
Liquid Nails LN-710 Low VOC Paneling and Molding Adhesive OUTRIGGERS SET W/CSTR 4-5IN   CASTER SCAFFOLDING 500LB 8IN
A latex-based adhesive that provides precision placement and requires less nailing. Offers a 20-minute working time and a durable, impact-resistant bond. GREENGUARD Gold Certified. Using a 1/4" bead covers 30 lineal feet. Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 33 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards. 8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin.
LADDER JACK LONG-BDY ALU      Louisville LeveLok Swivel Ladder Leveler Vulcan YH-SD401/YTL40102 Scaffold
LADDER JACK LONG-BDY ALU
Our Price: $112.97
Span 3 extension ladder rungs. Holds planks and stages up to 20? wide, features six pitch adjustments and folds for easy storage. Manufactured for use with type IAA, IA, and I fiberglass and aluminum extension ladders. Approx. Weight: 16 lbs. Extends up to 10" for steps. Attaches to either side or on multiple ladders. Large heavy duty swivel shoe with spurs. With patented KeyLok Quick Connect system. Fits FE1700, FE3200 (16'-32 and 36' - 40'), FE7600, FE4200HD, L-3022-PT, AE3200, AE2200, AE2800, AE1200HD, AE1200, and L-2094. Includes 1 quick connect leveler and 1 set (2) quick connect base units. Steel construction with rust resistant powder coated finish. 250 lb. step capacity with slip resistant surface. 4" locking casters. Includes 2 attachable tool bags. 18" W x 21-1/2" D x 58-1/25"H.
Werner Level-Master PK80 Ladder Leveler With Safety Shoes M-MPP719 PLATFORM 7FT X 19IN  Aluma-Plank 5500 Twist Proof Work Platform
Steel swivel shoes. Easily locks and levels. Up to 8-1/2" of adjustment. Heavy duty construction. Attaches to ladders side rails with locking nuts and bolts. Width of ladder and leveler is 3-1/4" wider than ladder. Fits aluminum series No. D1100, No. D1200, No. D1300, No. D1500, and No. D500. Fiberglass series No. D5900, No. D6000-2, No. D6200-2, No. 7100, No. D7100, and D7500. Two Level-Master Ladder Levelers (one for each side of ladder), mounting hardware and instructions included. U.L. Listed and Labeled. Meets OSHA Standards. Includes sliding locks for securing. 5/8? plywood. Meets ANSI, CSA and OSHA standards. For use with steel scaffolds. Heavy-duty hook reinforcement plates. Dimpled and pierced decking reduces material build-up and provides slip-resistant surface. Constructed with exclusive Alfo rung joints. Dimensions: Side Rail Length 7'; Side Rail Depth 3".
Werner AC10 2-Rung Long Body Ladder Jack Werner PS-48 Portable Rolling Scaffold GUARDRAIL ST F/BKR STYL SCFLD
Long body style attaches to two rungs. Supports 12", 14" and 20" wide stages or planks. Planks are adjustable making multiple working heights. Also use as a workbench, storage, and hauling heavy materials. High grade wheels prevent marring by locking securely into place. Lightweight. Platform Dimensions: 46-1/8" x 8-1/2" per plank (two planks per unit), 41-1/2" x 17" total standing area (both planks combined), 30-1/8" highest standing level. Assembled size: 69.75 x 29.25 x 44.5 in. Weighs 59 Lb. 1in 16 gauge structure. Includes 2 guardrails with gates and 4 toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA, and CSA standards.
Louisville PD9000 Scaffold Platform SCAFFOLD W/4FT WHL SHLF/GRDRL Mintcraft Pro YH-GR001B Guard Rail
Includes safety latch. Solid bolt construction. 2" rail size. Includes safety rail to hold on to, for stability and Convenient fold away tool shelf for paint can, bucket, screws, nails and tools. Use it as a cart to haul your equipment and heavy loads to and from job sites. Use as a workbench. Multi-level working area. Adjust platforms up to the desired level for a comfortable workplace. Assembled size: 49.5 x 22.5 x 57.75in. Weighs 59 Lb. 9ft reach. Powder coated. 2 anti-slip platform. 4in double locking heavy duty. Meets ANSI, OSHA, and CSA standards. Yellow powder coated finished. Assembled size on scaffolding: 69-1/2"W x 28-3/4"d x 41-1/4"H. Foldable. Steel material. One piece. For use with SKU# 879.5478.
Louisville FE0600 Commercial Extension Ladder Werner D5916-2 Multi-Section Extension Ladder Werner D6016-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville PD9000 Scaffold Platform Louisville FE1700 2-Section Extension Ladder GUARDRAIL ST F/BKR SCFLD 6FT
Includes safety latch. Solid bolt construction. 2" rail size. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside. Assembled size: 69.5 x 30 x 41.5 in. Weighs 60 Lb. 1in 16 gauge structure. Includes 2 guardrails with gates and 4 toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA, and CSA standards.
SCAFFOLD W/CSTR GDRL/TRY 4X5FT Werner D6216-2 Multi-Section Extension Ladder Werner D5920-2 Multi-Section Extension Ladder
Use it as a cart to haul your equipment and heavy loads to and from job sites. Folds flat for compact storage and transport. Safety rail to hold on to for stability. Fold away tool shelf for paint can, bucket, screws, nails and tools. Assembled size: 50.5 x 23.75 x 61.5in. Weighs 69 Lb. 9ft reach. Powder coated. 2 anti-slip 14 gauge steel platform. 5in double locking heavy duty. Meets ANSI, OSHA, and CSA standards. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
OUTRIGGER W/CASTER 6IN        OUTRIGGER INT SCAFFOLD 6FT    QualCraft Safe-T Ladder Extension System
OUTRIGGER W/CASTER 6IN
Our Price: $206.87
OUTRIGGER INT SCAFFOLD 6FT
Our Price: $206.88
Specifications: 21.5 x 4 x 26.5 in. assembled, weighs 52 lb, 6 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-BMSS. Meets ANSI, CSA and OSHA standards. Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 45 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISCPY. Meets ANSI, CSA and OSHA standards. Requires no tools, drilling or bolting to hold it securely in place. Aluminum design keeps handles from getting hot in the sun. Simple to use knob, tightens by hand without scratching or damaging ladder. Cushioned bumper pads help to protect the eaves of the roof. Added hand grips for easier usage. Safety latch prevents unit from slipping off ladder. Complies with OSHA standard 1926.502 (b)(3), 1926.1053 (b)(1) and ANSI standard 14.2 section 8.3.3.
QualCraft 2431 3-Rung Ladder Jack SCAFFOLD EXT JOBSITE 39IN     Werner D6020-2 Multi-Section Extension Ladder
SCAFFOLD EXT JOBSITE 39IN
Our Price: $212.74
MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements. Compatible with I-CISC, I-CISCTP and I-BMSS scaffolds. Assembled Dimensions 73.75 x 29 x 42.5 in. Meets ANSI, CSA and OSHA standard. Weighs 60.2lb. Includes 2 side frames, 2 braces, 8 locking pins. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder GUARDRAIL INT SCAFFOLD 6FT    SCAFFOLD EXT BAKER 40IN
GUARDRAIL INT SCAFFOLD 6FT
Our Price: $217.48
SCAFFOLD EXT BAKER 40IN
Our Price: $218.22
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Assembled size: 70 x 33.5 x 48.5 in. Weighs 89 Lb. Includes 2 guardrails with gates. Compatible with I-CISCPY & NU-WAVE /PERRY MODEL 660. Meets ANSI, OSHA, and CSA standards. Compatible with -CISCPY & NU-WAVE / PERRY MODEL 660 scaffolds. Assembled Dimensions 73.75 x 30.5 x 43.5 in. Meets ANSI and OSHA standard. 63 lb weighs. Powder Coated finish. Includes 2 side frames, 2 braces, 8 locking pins.
Werner D5924-2 Multi-Section Extension Ladder Werner PA200 Extension Plank Mintcraft Pro YH-SD601 Scaffold
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Closed position 8'; open position 13', and plank width 14". Inner rails 1-1/8" x 2", Outer flanged rails: 1-7/8" x 2". Meets ANSI and OSHA Standards. Includes four 5" swivel caster with brakes and a 28-3/32" W x 66-1/2" L x 15/32" T plywood board. Yellow powder coating finish. Size: 75"H  x 73-3/4"W x 29-1/4" D, Adjustable height: 27-15/16" - 71-1/4", heavy-duty square tube: 1-1/2" x 1-1/2" x 1/16,
Werner D6220-2 Multi-Section Extension Ladder Louisville FE0600 Commercial Extension Ladder SCAFFOLD BRAKE 2CT
SCAFFOLD BRAKE 2CT
Our Price: $240.89
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Compatible with I-CISC, I-CISCTP, I-CAISC, I-CISCPY and I-BMSS scaffolds. Includes two safety brakes. Assembled Dimensions 29.25 x 7.5 x 71.9 in. Weighs 31.1 lb. Meets ANSI, OSHA and CSA standard.
Louisville FE3200 Extension Ladder With Pro Top Werner D6024-2 Multi-Section Extension Ladder SCAFFOLD EXT BAKER 3X6FT
SCAFFOLD EXT BAKER 3X6FT
Our Price: $246.72
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Compatible with BuildMan 6? Drywall Baker I-BMSS scaffolds. Assembled Dimensions 74-1/4 x 30-3/4 x 39-3/4in. Meets ANSI, OSHA and CSA standards. 88.8lb weighs.
SCAFFOLD BKR STYLE 1000LB 6FT Werner 2000 One Person Slip Resistant Decorator Plank OUTIGGER F/I-CISC 46IN
OUTIGGER F/I-CISC 46IN
Our Price: $272.64
Has a 12ft reach and is stackable up to three units high in order to reach a range of 24ft. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 29.75in wide, it can roll through doorways. Assembled size: 74.75 x 29.75 x 75in. Weighs 127 Lb. From 27 to 73in working Heights. 2in increment adjustable heights. Powder coated. 1/2in plywood thick with protective steel edge banding platform. 5in double locking heavy duty. Meets ANSI, OSHA, and CSA standards. Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Meets ANSI and OSHA Standards. Specifications: 52.75 x 3.75 x 52.25 in. assembled, weighs 110 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP, I-CAISC and I-CISCPY. Meets ANSI, CSA and OSHA standards.
DeWalt DXL3020-24PT Extension Ladder Werner D6224-2 Multi-Section Extension Ladder Werner D6028-2 Multi-Section Extension Ladder
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Werner D6228-2 Multi-Section Extension Ladder SCAFFOLD INT PERRY STYLE 6FT  The Equalizer D8200-2EQ Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 31in wide, it can roll through doorways. Assembled size: 73.75 x 29.25 x 78.75in. Weighs 147.4 Lb. From 27 to 75.75in working Height. 2in increment adjustable heights. 12ft stackable up to 3 units high for 24 ft reach. Powder coated. 5/8in plywood thick with protective steel edge banding and anti-slip platform. 5in double locking heavy duty. Perry scaffold style compatible. Meets ANSI, OSHA, and CSA standards. Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder DeWalt DXL3020-28PT Extension Ladder SCAFFOLD BKR W/CASTER 6INX6FT
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Stackable up to two units high in order to reach a range of 18ft. Suitable and safe for all types of interior work. Each end can adjust separately to be used on both level surfaces and stairways. At 31in wide, it can roll through doorways. Platform height adjusts at 2in increments from 28in to 71.5in Double prong spring-loaded locking mechanism. Deck braces allow movement over lower obstacles. Assembled size: 75.75 x 31 x 76 in. Weighs 165 Lb. From 29 to 71.5in working Heights. Powder coated. 19/32in plywood, slip-resistant platform. 6in double locking heavy duty. Meets ANSI, OSHA, and CSA standards.
Werner 2000 One Person Slip Resistant Decorator Plank Werner D6232-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder
Twist-proof stage design. Individual slip-resistant decking minimizes paint or material build-up. Vinyl-coated end caps serve as hand grips and protects from sharp edges and surface marks. Double end rung provides extra rigidity on stages 20' or longer - standard on stages with 5" or 6" rails. Meets ANSI and OSHA Standards. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
Werner D6240-2 Multi-Section Extension Ladder Louisville FE3200 2-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1