Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > STEP - FIBERGLASS
Sort By:
1
Liquid Nails LN-704 Liquid Nails Construction Adhesive Leech F26-32 Construction Adhesive Franklin Titebond GREENchoice Construction Adhesive
This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
ADHESIVE CONSTUCTION VOC10.3OZ ADHESIVE CONST ALLPURP VOC 5OZ Loctite PL 520 Mirror?Adhesive
Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors.
WW Henry 440-004 Cove Base Adhesive Liquid Nails LN-206 Wood Projects Repair Adhesive Loctite 1589155 Power Grab Construction Adhesive
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead. Designed for furniture, woodworking, carpentry and repairs. No drip formula, fast drying, sandable, stainable, and paintable. Easy water clean up. Works best on wood, furniture and cardboard. Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up.
Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive ADHESIVE CONST HVY-DUTY 10OZ  Franklin Titebond Construction Adhesive
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
Liquid Nails LN-990 Liquid Nails Construction Adhesive ADHESIVE CONST HVY DUTY 10OZ  ADHESIVE CONST HVY DTY 5OZ
A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.
Loctite 1589346 Power Grab Construction Adhesive ADHESIVE TUB SURROUND 10.3OZ  Liquid Nails LN-930 Mirror Adhesive
For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead. Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear. This flexible, permanently bonding construction adhesive will not damage reflective backing. Heat and steam resistant. Synthetic rubber/resin formula. Covers 30 lineal ft. using 1/4" bead for 10 fl. oz.
Loctite 1589157 Power Grab Construction Adhesive Loctite PL 500 Landscape Block Adhesive Liquid Nails LN-950 Liquid Nails - Poly Construction Adhesive
Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). A weather-resistant adhesive specially formulated to adhere to non-porous surfaces such as glass, ceramic, glass and vinyl.
ADHESIVE CONSTRUCTION 2-1/2OZ Eclectic E6000 Craft Adhesive ADHESIVE MIRROR/MARBLE 10OZ
Ideal for small projects on all surfaces. Holds in 30 seconds, and bonds virtually anything including tub & tile, mirrors, flag brackets, wood, floating shelves, laminate repairs, brick and stone, water feature and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable. Premium grade hybrid adhesive specifically formulated for mirror and countertop installation. Provides a permanent vertical hold in one hour ideal for mirror installation. Easy to gun and will not stain or damage mirrors, countertops or finished surfaces. High strength adhesive that delivers adhesion on porous/non-porous construction materials. Meets or exceed ASTM C557.
ADHESIVE HEAVY DUTY MAX 10OZ  ADHESIVE CONSTRUCTION POLY 4OZ ADHESIVE CONST ALLPURP VOC28OZ
Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557.
ADHESIVE CONST MULTI SURF 5OZ Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive WW Henry FP00595005 Cove Base Adhesive
Formulated for use as a fast-setting, high-performance adhesive that bonds almost everything. Cures by absorbing moisture from the surfaces to which it has been applied and by absorbing moisture from the air. Cures rapidly to an initial set within 4 to 6 hours. Has resistance to heat, cold, and weathering. Meets all air quality regulations. For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. Installation of either rubber or vinyl cove base. Bonds rubber and vinyl cove base to concrete, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed or metal surfaces on all grade levels as recommend by the cove base manufacturer. Covers 90 lin. ft. per 30 oz. with 1/8" bead.
WW Henry 440-005 Cove Base Adhesive WW Henry 440-034 Cove Base Adhesive Franklin Titebond GREENchoice Construction Adhesive
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
Liquid Nails LNP-704 Liquid Nails Construction Adhesive ADHESIVE CONSTRUCTION POWR 9OZ ADHESIVE CONST ALL SURFACE 9OZ
This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Works in all conditions, all weather and on all materials. It can be applied in wet conditions as well as bond two non-porous surfaces. Can also be applied in a wide temperature range, from 40 to 140-degrees F. It is repositionable for 10 minutes and is GREENGUARD certified. Formulated with a proprietary hybrid-polymer blend. Instant grab. Bonds in any weather condition, wet or dry surfaces. Certified by UL Environment to meet the GREENGUARD GOLD standard as a low emitting material. Use on all surfaces, porous or non-porous, wet or dry except on polyethylene and polypropylene. Comes with a detachable nozzle for easy cleaning for reuse. Using full round 1/4? bead, 9 oz covers 27 linear feet.
Quikrete 9902-10 1-Part Construction Adhesive Loctite 1417170 Pl - Fast Grab Construction Adhesive Franklin Titebond Construction Adhesive
For permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Use to bond retaining wall block and caps and repair broken concrete. Has high initial tack making it ideal for securing vertical surfaces with less bracing required and is repositionable. 100-percent moisture curing polyurethane. May be used inside or outside. Water resistant. Low odor. Meets and exceeds APA AFG-01 and ASTM D3498 space. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
Loctite 1589199 Loctite - Power Grab Construction Adhesive Loctite PL 500 Landscape Block Adhesive GLUE PC-UNIVERSAL CLEAR 10.3OZ
Instant grab technology eliminates the need for nails and screws in many DIY and repairs jobs. No bracing and no flashing off. Latex-based for easy water clean-up. Low-odor, paintable and will not dry out. Pressure pack eliminates the use of a caulking gun. Use on concrete, brick veneer, treated wood, plywood and drywall. AFG-01 approved. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). Flexible, non-foaming, high solids glue. Can be used for bonding, gluing and sealing all types of surfaces without expansion and foaming. Dries clear. Forms a flexible tenacious bond to most surfaces. May be diluted with clean water. 10 minute working time. 1700 psi bond strength.
ADHESIVE CONSTRUCTION 9OZ     Franklin 3402 Titebond Cove Base Adhesive Dap 25053 Weldwood Cove Base Adhesive
For all surfaces. Holds in 30 seconds, and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foamboard, marble and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base. For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel.
Franklin 4222 Fast Set Construction Adhesive ADHESIVE HEAVY DUTY MAX 28OZ  Surebond EVERSEAL 1-Part Adhesive Sealant
Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity. Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498. One-part sealant for many industrial applications such as automotive, construction, roofing, marine, etc. Can be used to adhere the clear snow guard (SKU# 0581165) to metal roofing. Bonds to plastic, fiberglass, metal, wood, cement, etc. Versatile, flexible and hard setting. 50-degrees F minimum application temperature. Weather resistant. Paintable. 2000 PSI tensile strength. Translucent.
GLUE FLEX TUBE 6OZ WHITE      GLUE FLEX CARTRIDGE 10OZ      SikaBond 409586 Construction Adhesive
GLUE FLEX TUBE 6OZ WHITE
Our Price: $15.20
GLUE FLEX CARTRIDGE 10OZ
Our Price: $17.52
Bonds, seals, and repairs virtually everything. Easy to use, super strong, rubberized, waterproof adhesive with instant grab. Instant grab works like a magnet, locks into place and holds on tight. It can be applied to wet or dry surfaces, even underwater. Mildew and uv resistant. It can be applied to vertical or overhead surfaces, and it?s even paintable. Cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails. Bonds, seals, and repairs virtually everything. Formulated for heavier materials. Easy to use, super strong, rubberized, waterproof adhesive with instant grab. Instant grab works like a magnet, locks into place and holds on tight. It can be applied to wet or dry surfaces, even underwater. Mildew and uv resistant. It can be applied to vertical or overhead surfaces, and it?s even paintable. Cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails. Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure.
Liquid Nails LN-700 Fast Bonding Construction Adhesive WW Henry 440-044 Cove Base Adhesive Dap 25054 Weldwood Cove Base Adhesive
A fast-bonding, permanent weather-resistant adhesive for most common materials. Works best on wood, metal and concrete. GREENGUARD GOLD certified. Water resistant. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon. For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel.
Loctite PL 500 Tub Surround Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive
Fast-grab. Especially formulated for bathtub and shower surrounds. Engineered for all plastic panels, and provides a permanent bond in high-moisture conditions. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft.
Liquid Nails CB-10 Liquid Nails Cove Base Adhesive Leech F13-36 Construction Adhesive Franklin 3401 Professional Cove Base Adhesive
A water-resistant, latex-based construction adhesive with quick initial grab. Formulated to bond vinyl or rubber cover base and stair treads. No bracing required and easy water clean up. Covers 30 lin. ft. per 10.5 oz. cartridge. High quality construction adhesive that bonds paneling, foamboard, plywood and drywall. Good strength; will not become brittle or hard with age. Passes ASTM C-557 and D572-73 specifications. Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base.
Liquid Nails LN-601 Liquid Nails Construction Adhesive Franklin 3451 Titebond Construction Adhesive Louisville FS4006 Commercial Step Ladder
A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft. For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA.
Werner 5906 Single Sided Step Ladder Werner 5904 Single Sided Step Ladder Louisville AP8000 Stepstool
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth.
WW Henry FP00317069 Construction Adhesive Louisville FS2004 Commercial Step Ladder Liquid Nails LN-905 Landscape Block Adhesive
Installation of commercial and residential construction projects. Bonds wood wall paneling, FRP panels, predecorated wallboard, plywood, particleboard or hardboard, gypsum drywall, polystyrene or urethane foam insulation, furring strips. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Prevents shifting and loosening of blocks, stones and timber due to seasonal changes. GREENGUARD Gold Certified. Covers 30 lineal feet with 3/8" bead.
Louisville FS4004 Commercial Step Ladder Leech F26-33-12 Construction Adhesive Liquid Nails LNP-903 Liquid Nails Construction Adhesive
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive. Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified.
Werner 6000 Step Ladder Loctite 1390595 Pl Construction Adhesive Loctite Power Grab Tub Surround Adhesive
Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Designed to bond most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured. Has very low odor and requires only soap and water to clean up. Bonds most plastic (polystyrene, acrylic, ABS, PVC) bathroom and shower enclosures to waterproof drywall, DenShield gypsum board, wood, sanded Barker-Tile and sanded ceramic tile. GREENGUARD approved. Qualifies for LEED  points.
Liquid Nails LN-903 Versatile Construction Adhesive Werner 6004 Single Sided Step Ladder Franklin 4221 Fast Set Construction Adhesive
Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity.
Henkel 827628 Pro-Series Qb-300 Construction Adhesive Liquid Nails LN-901 Liquid Nails Construction Adhesive Louisville FS2006 Commercial Step Ladder
For bonding all types of paneling to structurally sound surfaces. Installs vinyl covered gypsum panels and all types of foam panel boards. Bonds foam to block or concrete walls and ceilings. Adheres cork, marble, polystyrene bath panels. Waterproof, fast grab, sets up quickly. Using a 10.5 oz. cartridge covers approximately 32 lin. ft. with a 1/4" bead and 14 lin. ft. with a 3/8" bead. Using a 29 oz. cartridge covers approximately 89 lin. ft. with a 1/4" bead and 40 lin. ft. with a 3/8" bead. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Loctite 1390602 Pl200 Professional Line Construction Adhesive Dap 25082 Beats The Nail Construction Adhesive Werner 6005 Single Sided Step Ladder
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. For general construction, remodeling, maintenance and repair projects. Quick-grab formula provides a high-strength, heat and water resistant bond to a variety of substrates. Meets ASTM C-557 Specifications. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Louisville FS1504 Extra Step Ladder Werner 260 Platform Ladder Louisville FS2005 Commercial Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6006 Single Sided Step Ladder DeWalt DXL3010-04 Step Ladder Liquid Nails LNP-601 High Quality Construction Adhesive
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft.
Liquid Nails LNP-901 Liquid Nails Construction Adhesive Louisville FS1506 Extra Step Ladder Werner 6200 Single Sided Step Ladder
Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
LADDER IA FBRGLS CRSS-STEP 4FT DeWalt DXL3110-06 Step Ladder Sika 106403 Sikabond Construction Adhesive
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure.
ADHESIVE CONST HVY DUTY 28OZ  Loctite 1390594 Pl Construction Adhesive Louisville FS1505 Extra Step Ladder
Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 6200 Single Sided Step Ladder Louisville FS4008 Commercial Step Ladder Werner 260 Platform Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide.
Werner 6206 Single Sided Step Ladder DeWalt DXL3010-06 Step Ladder LADDER IA FBRGLS CRSS-STEP 6FT
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Louisville FS2008 Commercial Step Ladder Werner 5908 Single Sided Step Ladder Werner 6200 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Liquid Nails LN-715 Low VOC Construction Adhesive Dap 25488 Beats The Nail Construction Adhesive Leech F26-34 Construction Adhesive
Provides a water-resistant bond between all types of tub and shower surrounds. No burn though, heat and steam resistant. Great for plastic, fiberglass and polystyrene tub and shower units. GREENGARD Gold Certified. Using a 1/8" bead covers 30 lineal feet. For construction, remodeling, maintenance and repair projects. May be used for bonding bath panel, tub enclosures and other types of wall panels to drywall, hardboard, plywood, plaster, masonry and other structurally sound surfaces. Use to repair loose ceramic tiles, sink tops, backsplashes and moulding. For installing Fiberglass Reinforced Panels. Professional-grade formula. Provides water and moisture-proof barrier between wall and panel. High strength and permanent bond. One gallon covers 40-60 sq. ft. depending upon surface irregularity. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
DeWalt DXL3110-08 Step Ladder Franklin 3452 Titebond Construction Adhesive Werner 7306 Single Sided Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16.
Louisville FS1508 Extra Step Ladder LADDER PRO PLATFORM FG 3 FT   Werner Old Blue Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?. Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
DeWalt DXL3010-08 Step Ladder Werner PD6203 Podium Ladder LADDER PRO PLATFORM FG 4 FT
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Features an extended handrail, multifunctional ProTop with multiple tool slots and magnet, and platform. SHOX with impact absorption. DA BOOT slip resistant boot. Extended handrail for added comfort and safety. Double-rivet step construction. Wide back braces. Platform dimensions: 17-5/8? x 14-1/2? x 14-1/2?.
Werner T6006 Twin Ladder Louisville FM1500 Twin Step Ladder LADDER IA FBRGLS CRSS-STEP 8FT
Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 6208 Single Sided Step Ladder Werner 7406 Extra Step Ladder Werner T6206 Twin Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe.
Werner Old Blue Single Sided Step Ladder Werner 7308 Single Sided Step Ladder Louisville FE0600 Commercial Extension Ladder
Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley.
Werner D5916-2 Multi-Section Extension Ladder Louisville FP1500 Platform Step Ladder Louisville FT1000 Tripod Ladder
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Non-conductive. Includes DA BOOT and top rail guard. Thick non-marring thermoplastic elastomer tread is bonded and mechanically fastened to the upper boot and provides a slip resistant footing. Slip resistant platform. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. 20-1/2 x 16" platform. Non-conductive. Includes steel reinforced outrigger, center-pull spreader brace, outrigger rail brackets, double-rivet step construction, heavy duty steel gusset bracing and full metal boot. Meets  or exceeds the safety standards set by ANSI and OSHA. 3" steps. Dimensions: 14" x 6-1/2" top, 3-1/8" x 1-1/8" front rails, 1-1/2" square.
Werner P6206 Platform Ladder Werner PD6204 Podium Ladder Werner D6016-2 Multi-Section Extension Ladder
Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
DeWalt DXL3810-06 Step Ladder Louisville FE1700 2-Section Extension Ladder Werner T7406 Multi-Use Twin Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide.
Werner PD6206 Podium Ladder Werner D6216-2 Multi-Section Extension Ladder Werner 7408 Extra Step Ladder
Extra-large platform for long standing comfort. Locktop extended guard rail securely wraps around work zone and holds tools. Edge 360 includes an integrated rail shield, Edge bracing and oversized foot pads. Double riveted slip-resistant Traction-Tred steps. Back-up plates reinfoce all top connectors. All steps and two rear horizontals are knee-braced Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
Werner D5920-2 Multi-Section Extension Ladder Louisville FM1500 Twin Step Ladder Werner D6020-2 Multi-Section Extension Ladder
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder Werner T6008 Twin Ladder Werner T6208 Twin Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe.
Werner P6208 Platform Ladder Louisville FS1510 Extra Step Ladder Werner D5924-2 Multi-Section Extension Ladder
Constructed with orange, electrically non-conductive side rails. Features double riveted steps with slip-resistant Traction-Tred. Large platform provides secure and comfortable work area. Back-up plates reinforce all top connectors and internal aluminum spreaders add stability. Molded brace and food pad combination provides enhanced bracing strength and increased protection against damage. Dimensions: Top 14-5/8" x 15", steps 3" wide, front rails 3-1/8" wide, rear rails 1-7/8" wide, spread between 30 and 33-1/8" wide, flange 1-1/8" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
Werner 6210 Single Sided Step Ladder Werner 6212 Single Sided Step Ladder Werner D6220-2 Multi-Section Extension Ladder
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE0600 Commercial Extension Ladder Louisville FE3200 Extension Ladder With Pro Top Werner D6024-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
DeWalt DXL3010-10 Step Ladder LADDER IA FBRGLS CRS-STEP 10FT Werner 7410 Extra Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
DeWalt DXL3810-08 Step Ladder Werner T7408 Multi-Use Twin Step Ladder DeWalt DXL3020-24PT Extension Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported.
Werner D6224-2 Multi-Section Extension Ladder Louisville FS1512 Extra Step Ladder Werner D6028-2 Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Werner D6228-2 Multi-Section Extension Ladder The Equalizer D8200-2EQ Multi-Section Extension Ladder Louisville FE3200 Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
DeWalt DXL3020-28PT Extension Ladder LADDER IA FBRGLS CRS-STEP 12FT Werner D6232-2 Multi-Section Extension Ladder
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE3200 Extension Ladder Werner D6240-2 Multi-Section Extension Ladder Louisville FE3200 2-Section Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1