Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > STEP - ALUMINUM
Choose a sub category:
SPECIALTY CARTRIDGES SPECIALTY CARTRIDGES FOAM DISPENSING ADHESIVES
FOAM DISPENSING ADHESIVES ADHESIVES - MULTIPURPOSE ADHESIVES - MULTIPURPOSE
ADHESIVES - SUBFLOOR / DECK ADHESIVES - SUBFLOOR / DECK ADHESIVES - PANELING / FOAMBOA
ADHESIVES - PANELING / FOAMBOA ADHESVIES - FRPPANEL ADHESVIES - FRPPANEL
ADHESIVES - COVEBASE ADHESIVES - COVEBASE ADHESIVES - VINYL TILE
ADHESIVES - VINYL TILE ADHESIVES - CERAMICTILE ADHESIVES - CERAMICTILE
ADHESIVES - FLOOR ADHESIVES - FLOOR ADHESIVES - DRYWALL
ADHESIVES - DRYWALL ADHESIVES - CARPET ADHESIVES - CARPET
CONTACT CEMENT CONTACT CEMENT
Sort By:
1
Henry 444 FRP Installer Grade Panel Adhesive DAP Smartbond Gun Grade Subfloor Construction Adhesive

Product price is not filled in. This product cannot be purchased.

For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Applies as a foam and transforms by collapsing into a high-strength, fast-curing adhesive gel. Polyurethane formula provides a strong, durable and permanent bond to a wide range of building materials. Bonds to wet, dry, frozen and treated lumber. Reduces nailing, floor squeaks and nail pops. Reusable for up to 30 days. Bridges gaps and voids. Exceeds ASTM D3498 shear strength tests.
Great Stuff Pro 343087 Grade Wall and Floor Adhesive OSI FRP555 Reinforced Panel Adhesive Liquid Nails FRP-310 Fiberglass Rpp Adhesive
Single-component, moisture-cured foam adhesive, used to ashere subfloors, drywall, paneling, foam panels and most construction materials. Provides a fast-grab tack and long-term bond to lumber, plywood, particle board, masonry, drywall, concrete and foam panels. Offers bonding power on dry, damp and even frozen lumber, making it efective in a variety of weather conditions. For use with pro series gun. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. Strong-bonding, low odor, adhesive specifically formulated for bonding Fiberglass Reinforced Panels (FRP). Use to bond to cured concrete, wood, drywall, concrete backerboard, greenboard, foamboard, and non-reinforced panels. Meets or exceeds ASTM C-557 Specifications. One gallon covers 50 sq. ft.
Louisville AS3000 Step Ladder Werner 150B Step Ladder Louisville AS2100 Step Ladder
Slip resistant. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Large structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide. Black molded plastic top provides large 6" wide x 12-3/8" long standing platform. Traction-Tred slip resistant full-sized steps. Pinch-Proof spreaders. Bottom step has double braces. Blue molded vinyl foot pads rivets to side rails. U.L. Listed. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3" Wide; Rear Rails 1-1/8"  Wide; Top 6" x 12-3/8"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 354 Single Sided Step Ladder With Pail Shelf Louisville AS4004 Step Ladder Louisville AS4005 Step Ladder
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide.
Werner 356 Single Sided Step Ladder With Pail Shelf Louisville AP8000 Stepstool Werner 363 Single Sided Step Ladder With Pail Shelf
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps.
Werner 355 Single Sided Step Ladder With Pail Shelf Louisville AS4006 Step Ladder Werner 360 Single Sided Step Ladder With Pail Shelf
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps.
Louisville AY8000 Extra Step Stand Henry 444 FRP Installer Grade Panel Adhesive Werner 366 Single Sided Step Ladder With Pail Shelf
Large structural molded top measures 14" wide by 9-1/4" deep. Diamond tread for a slip-resistant platform. Each step secured with six, large headed, semi-tubular steel rivets. Heavy duty steel gussets to support bottom step. Steps are 6" wide. Meets or exceeds the safety standards set by ANSI and OSHA. For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps.
Louisville AS2100 Step Ladder Werner 260 Platform Ladder SAWHORSE TYPE IA 2FT
SAWHORSE TYPE IA 2FT
Our Price: $77.35
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 374 Single Sided Step Ladder With Pail Shelf Louisville AS2100 Step Ladder Werner 368 Single Sided Step Ladder With Pail Shelf
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps.
Louisville L-2321 Extension Ladder Louisville AS4008 Step Ladder Werner D716-2 Multi-Section Extension Ladder
Mar-resistant impact caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. D-shaped rungs. Fixed runglock. Slip-resistant feet. Dimensions: Side Rails 2.5" wide; .75" Rail Flange; 1.23" Rung; Base outside width 16"; Fly outside width 16". Meets or exceeds the safety standards set by ANSI and OSHA. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder OSI FRP555 Reinforced Panel Adhesive SAWHORSE TYPE IA 3FT
SAWHORSE TYPE IA 3FT
Our Price: $98.22
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 376 Single Sided Step Ladder With Pail Shelf Werner 260 Platform Ladder DAP Weldwood Fiberglass Reinforced Panel Adhesive
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. For bonding FRP panels to concrete, plaster, plywood, and gypsum wallboard. Nonflammable, fast-setting and water resistant.
Werner D1116-2 Multi-Section Extension Ladder Werner TW373-30 Work Step Ladder Werner D1120-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. External pinch-proof spreaders for easy opening and closing. Double angle bracing on all steps. Mar-resistant feet for slip-resistance on concrete, wood and vinyl floors. Double top steps provide wide platform. Slip-resistant Traction-Tred Steps on front and rear section. Extra wide for versatile use as work stand, stage or material support. Lightweight and portable. Heavy steel hinges. Dimensions: top 8" x 30", 3" wide rails, 3" wide steps and 7/8" wide flange. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
SAWHORSE TYPE IA 4FT          Louisville L-2324 Extension Ladder Werner 406 Single Sided Step Ladder
SAWHORSE TYPE IA 4FT
Our Price: $125.58
This ladder combines two essential tools to create a lightweight wide surface and a support tool for sawing and other tasks. Equipped with angled aluminum slip-resistant rubber feet, heavy gauge steel hinges, heavy duty gusset bracing, and double-rivet step construction. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental.
Werner 378 Single Sided Step Ladder With Pail Shelf Louisville AE4216PG 2-Section Extension Ladder Werner 370 Single Sided Step Ladder With Pail Shelf
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder Werner D1220-2 Multi-Section Extension Ladder Louisville FE0600 Commercial Extension Ladder
Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley.
Werner D5916-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder Louisville AE4220PG 2-Section Extension Ladder
Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D1124-2 Multi-Section Extension Ladder Werner D6016-2 Multi-Section Extension Ladder Werner D1516-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner 408 Single Sided Step Ladder Louisville AS3000 Step Ladder Louisville FE1700 2-Section Extension Ladder
Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Structural molded top with recessed tray. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside.
Werner D1320-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder Louisville AE4224PG 2-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D6216-2 Multi-Section Extension Ladder Werner D5920-2 Multi-Section Extension Ladder Werner D1224-2 Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1520-2 Multi-Section Extension Ladder Werner D6020-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
Werner D1128-2 Multi-Section Extension Ladder Werner D5924-2 Multi-Section Extension Ladder Werner D6220-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE0600 Commercial Extension Ladder Louisville FE3200 Extension Ladder With Pro Top Werner D6024-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville AE4228PG 2-Section Extension Ladder Werner D1228-2 Multi-Section Extension Ladder Werner 410 Single Sided Step Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental.
Werner D1324-2 Multi-Section Extension Ladder Werner D1524-2 Multi-Section Extension Ladder DeWalt DXL3020-24PT Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported.
Werner D6224-2 Multi-Section Extension Ladder The Equalizer D1800-2 Multi-Section Extension Ladder Werner D1328-2 Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Eliminates uneven ground. Easy to use, adjust 3/8" increments up to 8-1/4". Convenient, built in bubble level. Dual action foot for use on hard or penetrable surfaces. Lightweight aluminum. Exclusive Alflo Twist-Proof performance. Slip-resistant steps and rugged locks. Reaches areas of the home that traditional ladders cannot. Dimensions: rails 3-5/16" wide, rungs 1-1/2", base widths 17-3/4" outside shoes, flange 1-3/16" wide and fly width 15-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D6028-2 Multi-Section Extension Ladder Werner D6228-2 Multi-Section Extension Ladder Werner D1232-2 Multi-Section Extension Ladder
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
The Equalizer D8200-2EQ Multi-Section Extension Ladder Louisville FE3200 Extension Ladder Werner D1528-2 Multi-Section Extension Ladder
Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
DeWalt DXL3020-28PT Extension Ladder Werner 412 Single Sided Step Ladder Louisville AE4232PG 2-Section Extension Ladder
Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D1332-2 Multi-Section Extension Ladder Werner D1532-2 Multi-Section Extension Ladder Werner D6232-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner D1240-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder Werner D1340-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D6240-2 Multi-Section Extension Ladder Werner D1540-2 Multi-Section Extension Ladder Louisville FE3200 2-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1