Home > PAINT & SUNDRIES > SUNDRIES > LADDERS > STEP - WOOD
Sort By:
1
Loctite PL 200 Projects Construction Adhesive Stanley Tools GS15DT Dualmelt Glue Sticks Arrow AP5 Glue Sticks
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns.
Stanley Tools GS230S Glue Sticks GLUE STCK ALL PURPOSE 5/16X4IN Arrow MG12 Glue Sticks
Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues. For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds.
Arrow SS6 Super Power Glue Sticks ADHESIVE FOAMBOARD 10.3 OZ    Stanley Tools GS500 Glue Sticks
Allows more time for lineup of larger areas. For wood, fabrics, leather, metal, plastics, etc. Sets in 90 to 120 seconds. 4" sticks break to 2" for thumb feed models. Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557. Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues.
Stanley Tools GS10DT Dualmelt Glue Sticks Loctite PL 520 Mirror?Adhesive Mintcraft JL-GGS-403L Glue Sticks
Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors. All purpose use for models, wood crafts, wreaths, canvas, leather, cardboard, etc. For use with all glue guns.
Stanley Tools GS20DT Dualmelt Glue Sticks ADHESIVE TUB SURROUND 10.3OZ  Liquid Nails LN-930 Mirror Adhesive
Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear. This flexible, permanently bonding construction adhesive will not damage reflective backing. Heat and steam resistant. Synthetic rubber/resin formula. Covers 30 lineal ft. using 1/4" bead for 10 fl. oz.
ADHESIVE WOOD/PANEL 10.3 OZ   Loctite PL 500 Landscape Block Adhesive FPC BS-12 Best Stik Glue Sticks
Premium grade, high strength adhesive. Specifically formulated for decorative panel and modeling installation. An instant grab adhesive that delivers a precise vertical hold on wood, foam, and PVC trim ideal for decorative interior projects. Easy to gun in cold temp. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). For everyday gluing projects. Use with high or low temperature glue guns. Bonds to metal, wood, paper, fabric, magnets, ceramics, floral arrangements, glass and plastic using a high temperature glue gun. Bonds to delicate materials such as ribbon, lace and children's crafts using a low temperature glue gun.
Arrow MG24-4 Glue Sticks Stanley Tools GS25DT Dualmelt Glue Sticks ADHESIVE MIRROR/MARBLE 10OZ
For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Premium grade hybrid adhesive specifically formulated for mirror and countertop installation. Provides a permanent vertical hold in one hour ideal for mirror installation. Easy to gun and will not stain or damage mirrors, countertops or finished surfaces. High strength adhesive that delivers adhesion on porous/non-porous construction materials. Meets or exceed ASTM C557.
Arrow AP10-4 Glue Sticks Arrow BAP5-4 Glue Sticks Loctite PL 500 Landscape Block Adhesive
For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For Arrow Trigger-Feed glue guns and other popular Trigger-Feed guns. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16).
Surebond EVERSEAL 1-Part Adhesive Sealant Michigan 1100-02 Pine Step Ladder Michigan 1100-04 Pine Step Ladder
One-part sealant for many industrial applications such as automotive, construction, roofing, marine, etc. Can be used to adhere the clear snow guard (SKU# 0581165) to metal roofing. Bonds to plastic, fiberglass, metal, wood, cement, etc. Versatile, flexible and hard setting. 50-degrees F minimum application temperature. Weather resistant. Paintable. 2000 PSI tensile strength. Translucent. Wrap around top ears for top protection. Outside galvanized steel spreaders. Knee Braces on bottom step. Outside washers. Bottom of front steps fully rodded through slots. Steps spaced evenly - 9" apart. High quality finished rails with eased edges. Rail ends are angle cut for full ground contact. Blind bore back legs with 1 rear rectangular horizontal. Dimensions: Front Rails 25/32" x 2-5/8"; Back legs 25/32" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Steps 3/4" x 3-1/4"; Rear Horizontals 3/4" x 2-1/2". Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4".
Michigan 1100-05 Pine Step Ladder Loctite PL 500 Tub Surround Adhesive Loctite PL 300 Foamboard Adhesive
Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4". Fast-grab. Especially formulated for bathtub and shower surrounds. Engineered for all plastic panels, and provides a permanent bond in high-moisture conditions. Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees.
Michigan 1311-04 Stocky Step Ladder Michigan 1100-06 Pine Step Ladder Loctite Power Grab Construction Adhesive
Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish. Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4". High grab minimizes nailing requirements. Gap-filling. Bridges minor framing gaps. For paneling and drywall, molding, trim and corkboard. Low odor. GREENGUARD Children and Schools certified. Water resistant.
Liquid Nails LN-905 Landscape Block Adhesive Michigan 1200 Pine Step Ladder Michigan 1311-06 Stocky Step Ladder
Prevents shifting and loosening of blocks, stones and timber due to seasonal changes. GREENGUARD Gold Certified. Covers 30 lineal feet with 3/8" bead. Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8"; Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Loctite Power Grab Tub Surround Adhesive Michigan 1200 Pine Step Ladder Michigan 1311-08 Stocky Step Ladder
Designed to bond most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured. Has very low odor and requires only soap and water to clean up. Bonds most plastic (polystyrene, acrylic, ABS, PVC) bathroom and shower enclosures to waterproof drywall, DenShield gypsum board, wood, sanded Barker-Tile and sanded ceramic tile. GREENGUARD approved. Qualifies for LEED  points. Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8"; Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Louisville L-2321 Extension Ladder Louisville AE2000 1-Section Straight Extension Ladder Werner D716-2 Multi-Section Extension Ladder
Mar-resistant impact caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. D-shaped rungs. Fixed runglock. Slip-resistant feet. Dimensions: Side Rails 2.5" wide; .75" Rail Flange; 1.23" Rung; Base outside width 16"; Fly outside width 16". Meets or exceeds the safety standards set by ANSI and OSHA. Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder Liquid Nails LN-604 Projects and Foamboard Adhesive Loctite PL 300 Foamboard Adhesive
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. A high-strength, low-odor, latex-based construction adhesive for indoor use. Water resistant. Bridges gaps up to 3/8". GREENGUARD Gold Certified.  Covers approximately 32 lineal ft. using a 1/4" bead. Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees.
Liquid Nails LN-710 Low VOC Paneling and Molding Adhesive Louisville AE2000 1-Section Straight Extension Ladder Werner D1116-2 Multi-Section Extension Ladder
A latex-based adhesive that provides precision placement and requires less nailing. Offers a 20-minute working time and a durable, impact-resistant bond. GREENGUARD Gold Certified. Using a 1/4" bead covers 30 lineal feet. Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Michigan 1311-10 Stocky Step Ladder Liquid Nails LN-715 Low VOC Construction Adhesive Werner D1120-2 Multi-Section Extension Ladder
Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish. Provides a water-resistant bond between all types of tub and shower surrounds. No burn though, heat and steam resistant. Great for plastic, fiberglass and polystyrene tub and shower units. GREENGARD Gold Certified. Using a 1/8" bead covers 30 lineal feet. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder Louisville AE4216PG 2-Section Extension Ladder Werner D1200-2 Compact Multi-Section Telescoping Extension Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Compact design retracts to 6'3". Twist-Proof due to the Alflo rung joints. Mar-resistant end caps. Heavy duty modified I-Beam side rails. 1-3/4" Slip-resistant Traction-Tred D-rungs. Durable extruded rung locks are spring loaded to operate smoothly. Convenient carry handle. Overlapping rung location for improved foot comfort. Use indoors or outdoors. Easy to maneuver around corners and through doors. Durable shoe rest flat on slip resistant pad or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1"; Base width 17-3/8" outside rails.
Werner D1220-2 Multi-Section Extension Ladder Louisville FE0600 Commercial Extension Ladder Werner D5916-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Dimensions: Rails 3-3/16" wide, flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections.
Louisville L-2324 Extension Ladder Louisville AE4220PG 2-Section Extension Ladder Werner D1124-2 Multi-Section Extension Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D6016-2 Multi-Section Extension Ladder Werner D1516-2 Multi-Section Extension Ladder Louisville FE1700 2-Section Extension Ladder
Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Quicklatch equipped runglock provides easier method of securing fly base sections when extended. One finger operation. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Does not include rope and pulley. Dimensions: 3-1/4' rail depth, 5-3/4' stack height, 14-11/16" base inside, 13-11/16" fly inside, 17-11/16" base outside and 16-1/16" fly outside.
Werner D1320-2 Multi-Section Extension Ladder Louisville L-2324 Extension Ladder Louisville AE4224PG 2-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley.
Werner D6216-2 Multi-Section Extension Ladder Werner D5920-2 Multi-Section Extension Ladder Werner D1224-2 Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Rugged gravity-spring locks operate smoothly. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1520-2 Multi-Section Extension Ladder Werner D6020-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
Werner D1128-2 Multi-Section Extension Ladder Werner D5924-2 Multi-Section Extension Ladder Werner D6220-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. YELLOW Mar-resistant molded end caps and end closures. Twist-Proof due to the exclusive Alflo rung joints. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Heavy duty pulley with rope. Interlocking side rails. Slip resistant Traction-Tred D-rung. Direct rung to rail connections. Gravity springs locks, combination aluminum rail shield and shoe with Shu-Lok design and slip-resistant shoe pad. Equipped with rope and smooth operating pulley except for No. D5916-2. Dimensions: Rails 3-3/16" wide (16' and 20'), rails 3-3/8" wide (24'), flange 1-3/16" wide, d-rungs 1-1/2" flat type, fly section width 15-3/4" outside rail, width 13-3/8" inside rail, base section width 14-5/8" inside rail, width 17" outside rail, width 18-1/8" outside shoes. Meets ANSI and OSHA Standards. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE0600 Commercial Extension Ladder Louisville FE3200 Extension Ladder With Pro Top Werner D6024-2 Multi-Section Extension Ladder
Non-conductive. QUICKLATCH equipped rung lock provides easier method of securing fly base sections when extended. Heavy duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. D-shaped-tempered, serrated aluminum rungs provide for a slip-resistant surface. Mar-resistant rail end caps. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: FE0616 side rails 3" x 1-1/8" wide, and FE0620 3-1/8 x 1-1/8",  1-5/8" x 1-1/4" rungs, 16-1/16" outside fly width and 17-1/16" outside base width. FE0616 does not include rope and pulley. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Louisville AE4228PG 2-Section Extension Ladder Werner D1228-2 Multi-Section Extension Ladder Werner D1324-2 Multi-Section Extension Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner D1524-2 Multi-Section Extension Ladder DeWalt DXL3020-24PT Extension Ladder Werner D6224-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental.
The Equalizer D1800-2 Multi-Section Extension Ladder Werner D1328-2 Multi-Section Extension Ladder Werner D6028-2 Multi-Section Extension Ladder
Eliminates uneven ground. Easy to use, adjust 3/8" increments up to 8-1/4". Convenient, built in bubble level. Dual action foot for use on hard or penetrable surfaces. Lightweight aluminum. Exclusive Alflo Twist-Proof performance. Slip-resistant steps and rugged locks. Reaches areas of the home that traditional ladders cannot. Dimensions: rails 3-5/16" wide, rungs 1-1/2", base widths 17-3/4" outside shoes, flange 1-3/16" wide and fly width 15-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Non-conductive fiberglass side rails. Non-marring, yellow molded end caps and rail closures. External guides on top of base section and internal guides on bottom of fly section securely interlock rails. Equipped with heavy duty pulley and rope except for D6016-2. Rope clamp ties rope to rung. Smoothly operating extruded gravity spring locks. Direct rung to rail connections. Combination aluminum rail shield bracket and shoe with Shu-lok, slip-resistant pad and spur plate. Twist-Proof due to the Alflo rung joints. Molded rung braces. Slip-resistant traction tred d-rungs. Dimensions: rails 3-3/8" wide, flange 1-3/16" wide, rungs 1-1/2" flat type, fly width 15-3/4" outside rails, and base width 18-1/8" outside shoes. Length of extension ladders when not extended is half the total length of the sections.
Werner D6228-2 Multi-Section Extension Ladder Werner D1232-2 Multi-Section Extension Ladder The Equalizer D8200-2EQ Multi-Section Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Adjust 3/8" increments up to 8-1/4". Dual action foot for use on hard or penetrable surfaces. Non-conductive, 7-layer construction fiberglass side rails. ALFLO twist-proof performance. Slip-resistant steps and rugged locks. Dimensions: rails 3" wide, rungs 1-3/4", base widths 17-3/8" outside rails (20-3/4" to outside of feet, flange 1-1/16" wide and fly width 14-1/4" outside. Length of extension ladders when not extended is half the total length of the sections.
Louisville FE3200 Extension Ladder Werner D1528-2 Multi-Section Extension Ladder DeWalt DXL3020-28PT Extension Ladder
Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental. Non-marring durable top with slots provides stability on corners or irregular surfaces. Slip-resistant rubber tread protects work surface. Nylon rope provides strength and durability during heavy use. Quick latch provides ease of use when locking rungs in place. Rung end caps eliminate noise while ladder is transported.
Louisville AE4232PG 2-Section Extension Ladder Werner D1332-2 Multi-Section Extension Ladder Werner D1532-2 Multi-Section Extension Ladder
QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Heavy-duty plated steel swivel safety shoes with thick rubber tread. Shoe can be used with tread down or in spike position. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Side rails are full 3" extrusions shaped into a modified I-beam for strength and light weight. Interlocking rails keep fly and base sections from coming apart. Meets or exceeds the safety standards set by ANSI and OSHA. ProGrip- integrated surface protector with non-marring, slip resistant pads and hand grips. Dimensions: 3" rail depth, 5-1/4" stack height, 15-1/4" base inside, 14-5/16" fly inside, 17-1/8" base outside and 16-3/16" fly outside. AE4216PG does not include rope & pulley. Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Werner D6232-2 Multi-Section Extension Ladder Werner D1240-2 Multi-Section Extension Ladder Louisville FE3200 Extension Ladder
Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Strong modified I-beam rails. Interlocking side rails. Smooth operating pulley. Mar-resistant molded end caps. Shoe rest flat or is held in spur position with shu-lok feature. Spring loaded locks operate smoothly U.L. Listed and labeled. Meets ANSI Code and OSHA requirements. Dimensions: Side rails 3" wide; Flange 1" wide; Rungs 1-3/4" wide; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Includes the ProTop, a multifunctional top designed to make work easier for electrical-utility, heavy construction and residential jobs. Includes a nonconductive work tray, molded copolymer with practical handyman tool slots. Integrated bumper, soft non-marking/non-marring rubber tread protects the work surface. V-shape design with rubber tread allows the ladder to work against corners, poles and trees. QuickLatch provides easier method of securing fly base sections. Steel swivel safety shoe with metal shield. Outside slide guides. D-shaped rung for more comfortable standing. Mar-resistant.  Lashing slots provide the option for lashing the ladder to the pole or tree. Dimensions: 1.187" rail depth, 14.688" (20PT-28PT) and 15.313" (32PT) base inside, 13.687"(20PT-28PT) and 14.312" (32PT) fly inside, 17.062" (20PT-28PT) and 17687" (32PT) base outside and 16.061" (20PT-28PT) and 16.686" (32PT) fly outside.
Werner D1340-2 Multi-Section Extension Ladder Werner D6240-2 Multi-Section Extension Ladder Werner D1540-2 Multi-Section Extension Ladder
Twist-Proof due to the Alflo rung joints. Blue molded non-marring end caps and rail closures. Heavy duty modified I-Beam side rails. Interlocking side rails. Slip-resistant Traction-Tred D-rungs. Smoother operating pulley design. Heavy duty spring loaded locks operate smoothly. Durable shoe rest flat or is held in spur position with Shu-lok feature. Dimensions: Rails 3" wide; Rungs 1-3/4"; Flange 1-1/16"; Base width 17-3/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Orange, 3-1/4" fiberglass side rails. Direct rung to rail connections with patented Alflo rung joints. Slip-resistant Traction-Tred D-rungs. Non-marring end caps. Pre-pierced holes for easy field installation of accessories. Internal guides on bottom of fly section securely interlock rails. Interlocking side rails. External guides at top of base section securely interlock rails. Two sets on D6240-2. Rugged gravity-spring locks operate smoothly. Rope clamp ties rope to rung. Extruded aluminum shoe with steel ice-pick plate. Base and fly easy to separate. Equipped with heavy duty pulley with rope except. Molded rung braces. Durable rail shield bracket and shoe with shu-lok, slip-resistant pad and spur plate. Dimensions: Flange 1-3/16" wide; rungs 1-1/2"; Fly width 16" outside rails; Base width 19" outside shoes. Length of extension ladders when not extended is half the total length of the sections. Rental. Twist-Proof due to the Alflo rung joints. Slip-resistant Traction-Tred d-rungs. Mar-resistant end caps. Extra heavy duty I-beam rails. Thick guide bracket engages full fly rail. Smooth operating pulley design. Enclosed shape protects pulley. Base and fly separate easily for use as an extension or two single sections. Rubbed spring loaded locks operate smoothly. Guide brackets for durability and smooth operation of fly section. Rugged shoe rests flat or is held in spur position with Shu-Lok feature. Equipped with rope and smooth operating pulley except for No. D1516-2. Dimensions: Rails 3" wide; Flange 1-1/8" wide; Rungs 1-3/4" wide; Base width 18-1/8" outside rails. Length of extension ladders when not extended is half the total length of the sections. Rental.
Louisville FE3200 2-Section Extension Ladder
Mar-resistant end caps on all rail ends provide rail protection for longer life and protect work surface from marring. Heavy-duty plated steel swivel safety shoes with thick rubber tread. QUICKLATCH equipped runglock provides easier method of securing fly base sections when extended. Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Two extra heavy-duty outside slide guides secured to top of base section with four rivets per guide for maximum strength. Dimensions for 16': Rails 3-1/4" wide; 1.2" Rail flange; 1.626" Rung; Base outside width 17-1/16"; Fly outside width 16-1/16". Dimensions for 40': Rails 3-5/16" wide;  Rail flange; Rung; Base outside width 17-11/16"; Fly outside width 16-11/16". Meets or exceeds the safety standards set by ANSI and OSHA. FE3216 does not include rope and pulley.
   
 
1