Home > PAINT & SUNDRIES > SUNDRIES > ABRASIVES - NON POWER > STRIPPING & FINISHING PADS
Sort By:
1
Loctite PL 200 Projects Construction Adhesive Stanley Tools GS15DT Dualmelt Glue Sticks Liquid Nails LN-704 Liquid Nails Construction Adhesive
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified.
Arrow AP5 Glue Sticks 3M 7414 Stripping Pad Stanley Tools GS230S Glue Sticks
For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns. For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues.
GLUE STCK ALL PURPOSE 5/16X4IN Leech F26-32 Construction Adhesive 3M 10111 Stripping Pads
Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive. Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Replacement pad for No.10110 heavy-duty stripping tool.
3M 10112 Stripping Pads 3M 10113 Stripping Pads 3M 10144 Finishing Pad
Use with chemical paint strippers to remove paint, varnishes, and other finishes without harming wood. Will not splinter or shred like steel wool. Designed to be flexible for working on contours. Replace and outperform #2 steel wool. Effectively removes paint residue without harming wood. Replaces 0-grade steel wool, but will not shred, splinter, or rust like steel wool. Removes bubbles, dust nibs, and other blemishes for a super smooth finish. Replaces 00-grade steel wool, but will not shred or splinter like steel wool.
Arrow MG12 Glue Sticks Arrow SS6 Super Power Glue Sticks 3M 7415 Stripping Pad
For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds. Allows more time for lineup of larger areas. For wood, fabrics, leather, metal, plastics, etc. Sets in 90 to 120 seconds. 4" sticks break to 2" for thumb feed models. For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool.
3M 7413 Stripping Pad Norton 48147 Hand Pad Norton 48148 Hand Pad
For paint or varnish removal, metal finishing or wood finishing. Will not rust, splinter or shred like steel wool. For heavy duty removal of coatings with chemical strippers. Won't rust, shred or splinter. Removes light rust and corrosion. Cleans and brightens metal. Won't rust, shred or splinter.
Norton 48146 Hand Pad Franklin Titebond GREENchoice Construction Adhesive Gator 7320 Multi-Surface Metal Finishing Pad
For sanding between coats of stain, sealer or varnish on wood surfaces. Won't rust, shred or splinter. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. For removing minor blemishes between coat sanding of paint, varnish and polishing metal surfaces.
Gator 7318 Multi-Surface Cleaning and Stripping Pad ADHESIVE CONSTUCTION VOC10.3OZ ADHESIVE FOAMBOARD 10.3 OZ
For stripping paint and varnish, cleaning pots, pans, grills and household surfaces. Can be used with chemical strippers and cleaners. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557.
Stanley Tools GS500 Glue Sticks ADHESIVE CONST ALLPURP VOC 5OZ Stanley Tools GS10DT Dualmelt Glue Sticks
Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds.
Sand Paper? With NO-SLIP GRIP? Backing Sand Paper? With NO-SLIP GRIP? Backing Liquid Nails LN-206 Wood Projects Repair Adhesive
For leveling and smoothing rough or uneven bare surfaces on any surface. No slip grip backing gives you more control. For fast stripping of rust, paint, varnish and very rough surfaces using sharp minerals and strong resins that cut fast and last long. The no slip grip backing gives you more control. Designed for furniture, woodworking, carpentry and repairs. No drip formula, fast drying, sandable, stainable, and paintable. Easy water clean up. Works best on wood, furniture and cardboard.
Loctite 1589155 Power Grab Construction Adhesive Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive Mintcraft JL-GGS-403L Glue Sticks
Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up. For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. All purpose use for models, wood crafts, wreaths, canvas, leather, cardboard, etc. For use with all glue guns.
ADHESIVE CONST HVY-DUTY 10OZ  Franklin Titebond Construction Adhesive Liquid Nails LN-990 Liquid Nails Construction Adhesive
Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications. A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified.
ADHESIVE CONST HVY DUTY 10OZ  ADHESIVE CONST HVY DTY 5OZ    Loctite 1589346 Power Grab Construction Adhesive
Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead.
Stanley Tools GS20DT Dualmelt Glue Sticks Loctite 1589157 Power Grab Construction Adhesive ADHESIVE WOOD/PANEL 10.3 OZ
Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white. Premium grade, high strength adhesive. Specifically formulated for decorative panel and modeling installation. An instant grab adhesive that delivers a precise vertical hold on wood, foam, and PVC trim ideal for decorative interior projects. Easy to gun in cold temp.
FPC BS-12 Best Stik Glue Sticks Liquid Nails LN-950 Liquid Nails - Poly Construction Adhesive Arrow MG24-4 Glue Sticks
For everyday gluing projects. Use with high or low temperature glue guns. Bonds to metal, wood, paper, fabric, magnets, ceramics, floral arrangements, glass and plastic using a high temperature glue gun. Bonds to delicate materials such as ribbon, lace and children's crafts using a low temperature glue gun. A weather-resistant adhesive specially formulated to adhere to non-porous surfaces such as glass, ceramic, glass and vinyl. For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds.
ADHESIVE CONSTRUCTION 2-1/2OZ 3M 10110 Flat Stripping Tool Pad Stanley Tools GS25DT Dualmelt Glue Sticks
Ideal for small projects on all surfaces. Holds in 30 seconds, and bonds virtually anything including tub & tile, mirrors, flag brackets, wood, floating shelves, laminate repairs, brick and stone, water feature and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. Easy-grip, reusable handle and replaceable pad used with chemical strippers to quickly remove paint, varnishes, and other finishes without harming wood. Designed to keep hands free from chemicals, to allow application of greater pressure for tough jobs, and to absorb residue in the No.10111 replaceable pad. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds.
Eclectic E6000 Craft Adhesive ADHESIVE HEAVY DUTY MAX 10OZ  ADHESIVE CONSTRUCTION POLY 4OZ
Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable. Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft.
Homax Magic Porcelain ChipFix Self-Leveling Epoxy Paint Gator 7187 Zip Refill Sander Gator Zip Sander 7221 Multi-Surface Step-3 Refill Sanding Sheet
Durable, high gloss epoxy finish for sinks, tubs and tile. Repairs chips, nicks and scratches. Self leveling, will not shrink or crack. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280.
Gator Zip Sander 7202 Multi-Surface Step-1 Refill Sanding Sheet Gator Zip Sander 7206 Multi-Surface Step-2 Refill Sanding Sheet ADHESIVE CONST ALLPURP VOC28OZ
For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. For use on wood, metal, drywall, fiberglass, and painted surfaces. Manufactured with high performance grain. Anti-clog coating to reduce buildup. "Quick-Change" hook & loop sanding refills for Zip Sander Orgill SKU# 743.6280. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557.
ADHESIVE CONST MULTI SURF 5OZ Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive Arrow AP10-4 Glue Sticks
Formulated for use as a fast-setting, high-performance adhesive that bonds almost everything. Cures by absorbing moisture from the surfaces to which it has been applied and by absorbing moisture from the air. Cures rapidly to an initial set within 4 to 6 hours. Has resistance to heat, cold, and weathering. Meets all air quality regulations. For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For Arrow Trigger-Feed glue guns and other popular Trigger-Feed guns.
Arrow BAP5-4 Glue Sticks Franklin Titebond GREENchoice Construction Adhesive Liquid Nails LNP-704 Liquid Nails Construction Adhesive
For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified.
ADHESIVE CONSTRUCTION POWR 9OZ ADHESIVE CONST ALL SURFACE 9OZ Quikrete 9902-10 1-Part Construction Adhesive
Works in all conditions, all weather and on all materials. It can be applied in wet conditions as well as bond two non-porous surfaces. Can also be applied in a wide temperature range, from 40 to 140-degrees F. It is repositionable for 10 minutes and is GREENGUARD certified. Formulated with a proprietary hybrid-polymer blend. Instant grab. Bonds in any weather condition, wet or dry surfaces. Certified by UL Environment to meet the GREENGUARD GOLD standard as a low emitting material. Use on all surfaces, porous or non-porous, wet or dry except on polyethylene and polypropylene. Comes with a detachable nozzle for easy cleaning for reuse. Using full round 1/4? bead, 9 oz covers 27 linear feet. For permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Use to bond retaining wall block and caps and repair broken concrete.
Loctite 1417170 Pl - Fast Grab Construction Adhesive Franklin Titebond Construction Adhesive Loctite 1589199 Loctite - Power Grab Construction Adhesive
Has high initial tack making it ideal for securing vertical surfaces with less bracing required and is repositionable. 100-percent moisture curing polyurethane. May be used inside or outside. Water resistant. Low odor. Meets and exceeds APA AFG-01 and ASTM D3498 space. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications. Instant grab technology eliminates the need for nails and screws in many DIY and repairs jobs. No bracing and no flashing off. Latex-based for easy water clean-up. Low-odor, paintable and will not dry out. Pressure pack eliminates the use of a caulking gun. Use on concrete, brick veneer, treated wood, plywood and drywall. AFG-01 approved.
GLUE PC-UNIVERSAL CLEAR 10.3OZ ADHESIVE CONSTRUCTION 9OZ     Gator MicroZip Sanding Sheet Refill
Flexible, non-foaming, high solids glue. Can be used for bonding, gluing and sealing all types of surfaces without expansion and foaming. Dries clear. Forms a flexible tenacious bond to most surfaces. May be diluted with clean water. 10 minute working time. 1700 psi bond strength. For all surfaces. Holds in 30 seconds, and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foamboard, marble and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. The "Quick-Change" hook & loop holding system allows faster sheet changes. Contains 10 premium sheets of each, 80, 120, and 220 grits. Use with Sku# 178.7274.
Gator 7186 Multi-Surface Zip Sander Franklin 4222 Fast Set Construction Adhesive STEP STOOL FOLDING
Great for sanding flat surfaces as well as hard-to-reach areas. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly in your hand. Contains 2-220 grit, 2-120 grit and 2-80 grit refill sheets and diamond shape sander. Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity. Great step up for in the kitchen, bathroom, etc.
ADHESIVE HEAVY DUTY MAX 28OZ  Gator 7800 Micro Zip Sanding Kit Rubbermaid FG420087WHT Roughneck Step Stools
Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498. Small size allows for easy access to tight spots. The "Quick-Change" hook & loop holding system allows faster sheet changes. Comfortable foam handle fits snugly under your index finger. Contains 10-220 grit, 10-120 grit and 10-80 grit refill sheets. Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
Rubbermaid FG420087BISQUE Roughneck Step Stools GLUE FLEX TUBE 6OZ WHITE      Devcon 90216 Bath/Tub Repair Kit
GLUE FLEX TUBE 6OZ WHITE
Our Price: $15.20
Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high. Bonds, seals, and repairs virtually everything. Easy to use, super strong, rubberized, waterproof adhesive with instant grab. Instant grab works like a magnet, locks into place and holds on tight. It can be applied to wet or dry surfaces, even underwater. Mildew and uv resistant. It can be applied to vertical or overhead surfaces, and it?s even paintable. Cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails. Kit includes Pigment for color matching, mixing tray, sticks and fiberglass patch. Repair small knicks, cracks and holes on porcelain, fiberglass plastic and ceramic materials. Use it to make repairs on toilet, sink, tile surrounds, spa tubs, figurines, bathtubs, shower stalls and more. Dries white or add color pigment for Almond/Bisque color matching.
GLUE FLEX CARTRIDGE 10OZ      SikaBond 409586 Construction Adhesive Liquid Nails LN-700 Fast Bonding Construction Adhesive
GLUE FLEX CARTRIDGE 10OZ
Our Price: $17.52
Bonds, seals, and repairs virtually everything. Formulated for heavier materials. Easy to use, super strong, rubberized, waterproof adhesive with instant grab. Instant grab works like a magnet, locks into place and holds on tight. It can be applied to wet or dry surfaces, even underwater. Mildew and uv resistant. It can be applied to vertical or overhead surfaces, and it?s even paintable. Cures in 24-48 hours and reaches maximum strength in 7 days. No need for screws or nails. Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure. A fast-bonding, permanent weather-resistant adhesive for most common materials. Works best on wood, metal and concrete. GREENGUARD GOLD certified. Water resistant.
Norton 45600 Hand Pad Cosco 11-905-PBL4 Safety 1St Folding Step Stools Cosco 11135CLGG4 Folding Step Stools
For heavy duty cleaning and stripping through finishing to light duty polishing. Lightweight, all-plastic design. Legs lock into position; "locked" indicator is visible on top. Folds to 3-3/8" for compact storage. Top side walls help prevent accidental slipping. Convenient handle for carrying ease. Weight capacity - 200 pounds. Dimensions: Open - 10"H x 16.25"W x 11.25"D. Folded - 3.38"H x 20.13"W x 11.25"D. Two metal steps for strength, non-marring, skid resistant front leg tips. Opti-Bond powder finish, ribbed, slip resistant step treads. Convenient handle for carrying ease, continuous rear leg support for added strength. Meets ANSI Standards for Type III Light Duty Household Rating.
Homebasix WK-2062A Folding Step Stools Cosco 11565CGGL4 Big Step Folding Step Stools Scotch-Brite 7447 Hand Pad
Gray powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 18-1/2"; Step size: 15 L x 10-1/4"W; Open Size: 38-1/2"H x 19-1/4"W  x 20"D; Closed Size: 42-1/2" H x 19-1/4" W x 3" D. Large heavy-duty injection molded polypropylene resin steps, ribbed slip resistant leg tips, continuous rear leg tips and glides, compact flat,  ANSI Type 3 Household Duty. Reusable, nylon web pad for cleaning, scuffing or deburring finishes by hand. Cuts fast, leaves a consistent finish, and can be used with water or solvents. Outperforms steel wool, wire brushes, and other non-woven hand pads because material will not rust and resists tearing, splintering, shredding, and loading.
Scotch-Brite 7448 Hand Pad Cosco 11628ABK4 Lite Solutions Step Stools Scotch-Brite 7445 Light Duty Hand Pad
Reusable, nylon web pad for cleaning, scuffing or deburring finishes by hand. Cuts fast, leaves a consistent finish, and can be used with water or solvents. Outperforms steel wool, wire brushes, and other non-woven hand pads because material will not rust and resists tearing, splintering, shredding, and loading. Large, heavy-duty injection molded polypropylene resin top step. Ribbed, slip-resistant step treads. Self-locking fold. Non-marring, skid-resistant leg tips and glides. Folds flat by lifting handle. Weighs 5 lbs. Can be used for hand cleaning, blending finishing. Conformable web and fine mineral. For fine finishes, light cleaning. May be used by hand, with a hand pad block or on an in-line sander. Abrasive mineral.
Norton 74700 Hand Pad Norton 74800 Hand Pad Norton 79600 Hand Pad
For heavy duty cleaning and stripping through finishing to light duty polishing. For heavy duty cleaning and stripping through finishing to light duty polishing. For heavy duty cleaning and stripping through finishing to light duty polishing.
Rubbermaid FG420903WHITE Ez Step Step Stools Loctite PL 300 Foamboard Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive
Lightweight, resistant to rust and dents, easy to clean. Stands upright when folded. 25" x19" x 6-1/2". Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft.
Liquid Nails LN-903 Liquid Nails Construction Adhesive Leech F13-36 Construction Adhesive Liquid Nails LN-601 Liquid Nails Construction Adhesive
Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. High quality construction adhesive that bonds paneling, foamboard, plywood and drywall. Good strength; will not become brittle or hard with age. Passes ASTM C-557 and D572-73 specifications. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft.
Franklin 3451 Titebond Construction Adhesive Louisville FS4006 Commercial Step Ladder Werner 5906 Single Sided Step Ladder
For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Loctite Power Grab Construction Adhesive Cosco 11130WHT Chair/Step Stools Werner 5904 Single Sided Step Ladder
High grab minimizes nailing requirements. Gap-filling. Bridges minor framing gaps. For paneling and drywall, molding, trim and corkboard. Low odor. GREENGUARD Children and Schools certified. Water resistant. 24"H, foam-cushioned, contoured seat lifts out of way for step up convenience. Two 9-1/2" and 17-1/2" high molded safety tread steel steps. Seat lifts up for easy access to steps. Stable chromed steel frame and contoured back, baked-on enamel trim. Protective leg tips . Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
WW Henry FP00317069 Construction Adhesive Louisville FS2004 Commercial Step Ladder Homebasix WK-2063A Folding Step Stools
Installation of commercial and residential construction projects. Bonds wood wall paneling, FRP panels, predecorated wallboard, plywood, particleboard or hardboard, gypsum drywall, polystyrene or urethane foam insulation, furring strips. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 27-1/2". Step size: 15" L X 10" W; Open size: 50-3/4"(H) x 19-1/4"(W) x 25"(D); Closed size: 55-1/4"(H) x 19-1/4"(W) x 3"(D).
Louisville FS4004 Commercial Step Ladder Leech F26-33-12 Construction Adhesive Werner 240 Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive. Easy action open-close. Non-slip steps. Non-marring rubber tip feet. Folds to 3" for easy storage. Wide angle stance. Ideal for close-up work. UL listed. Meets ANSI Code. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Steps 6" wide; Height to 2nd step 23".
Liquid Nails LNP-903 Liquid Nails Construction Adhesive Werner 6000 Step Ladder Loctite 1390595 Pl Construction Adhesive
Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified. Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft.
Liquid Nails LN-903 Versatile Construction Adhesive Werner 6004 Single Sided Step Ladder Franklin 4221 Fast Set Construction Adhesive
Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity.
Henkel 827628 Pro-Series Qb-300 Construction Adhesive Liquid Nails LN-901 Liquid Nails Construction Adhesive Louisville FS2006 Commercial Step Ladder
For bonding all types of paneling to structurally sound surfaces. Installs vinyl covered gypsum panels and all types of foam panel boards. Bonds foam to block or concrete walls and ceilings. Adheres cork, marble, polystyrene bath panels. Waterproof, fast grab, sets up quickly. Using a 10.5 oz. cartridge covers approximately 32 lin. ft. with a 1/4" bead and 14 lin. ft. with a 3/8" bead. Using a 29 oz. cartridge covers approximately 89 lin. ft. with a 1/4" bead and 40 lin. ft. with a 3/8" bead. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Loctite 1390602 Pl200 Professional Line Construction Adhesive Dap 25082 Beats The Nail Construction Adhesive Werner 6005 Single Sided Step Ladder
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. For general construction, remodeling, maintenance and repair projects. Quick-grab formula provides a high-strength, heat and water resistant bond to a variety of substrates. Meets ASTM C-557 Specifications. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Louisville FS1504 Extra Step Ladder Louisville FS2005 Commercial Step Ladder Werner 6006 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
DeWalt DXL3010-04 Step Ladder Liquid Nails LNP-601 High Quality Construction Adhesive Liquid Nails LNP-901 Liquid Nails Construction Adhesive
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant.
Louisville FS1506 Extra Step Ladder Homebasix WK-2064A Folding Step Stools Werner 6200 Single Sided Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Hammertone powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. With plastic tray. Lightweight and easy to carry. Highest standing: 28"; Step size: 15"L x 10-1/4" W; Tray size: 14-" L x 10-" W x 1-3/8"D; Open size: 50-3/4 H x 19-1/4" W x 24" D).  Closed size: 67-1/2"(H) x 22"(W) x 5-3/4"(D). Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
LADDER IA FBRGLS CRSS-STEP 4FT DeWalt DXL3110-06 Step Ladder Louisville AE2000 1-Section Straight Extension Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width.
Sika 106403 Sikabond Construction Adhesive ADHESIVE CONST HVY DUTY 28OZ  Liquid Nails LN-604 Projects and Foamboard Adhesive
Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. A high-strength, low-odor, latex-based construction adhesive for indoor use. Water resistant. Bridges gaps up to 3/8". GREENGUARD Gold Certified.  Covers approximately 32 lineal ft. using a 1/4" bead.
Loctite 1390594 Pl Construction Adhesive Louisville FS1505 Extra Step Ladder Werner 6200 Single Sided Step Ladder
Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Loctite PL 300 Foamboard Adhesive Louisville FS4008 Commercial Step Ladder Liquid Nails LN-710 Low VOC Paneling and Molding Adhesive
Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. A latex-based adhesive that provides precision placement and requires less nailing. Offers a 20-minute working time and a durable, impact-resistant bond. GREENGUARD Gold Certified. Using a 1/4" bead covers 30 lineal feet.
Louisville AE2000 1-Section Straight Extension Ladder Werner 6206 Single Sided Step Ladder DeWalt DXL3010-06 Step Ladder
Features outside slide guides, d-shape rungs fully serrated for slip resistant surface, mar resistant rail end caps, quicklatch rung lock for better secure operation and swivel safety shoes to be used as tread down or in spike position. 17-13/16 outside width. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
LADDER IA FBRGLS CRSS-STEP 6FT Louisville FS2008 Commercial Step Ladder Werner 5908 Single Sided Step Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Werner 6200 Single Sided Step Ladder Dap 25488 Beats The Nail Construction Adhesive Leech F26-34 Construction Adhesive
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". For construction, remodeling, maintenance and repair projects. May be used for bonding bath panel, tub enclosures and other types of wall panels to drywall, hardboard, plywood, plaster, masonry and other structurally sound surfaces. Use to repair loose ceramic tiles, sink tops, backsplashes and moulding. For installing Fiberglass Reinforced Panels. Professional-grade formula. Provides water and moisture-proof barrier between wall and panel. High strength and permanent bond. One gallon covers 40-60 sq. ft. depending upon surface irregularity. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Cosco 11003ABL2 World's Geatest Aluminum Stepladders DeWalt DXL3110-08 Step Ladder Franklin 3452 Titebond Construction Adhesive
Lightweight aluminum frame, three large heavy duty injection molded polypropylene resin steps. Extra-large 16-1/4 x 16-1/4 top platform step. Extended hand with security lock. Easy one hand fold. Large non-marring, skid resistant, stabilizing feet protect floor surfaces. Deluxe, molded utility tray features: Recessed areas for paint cans, tools, drill holder etc. Two locking drawers for small parts, Meets ANSI Standards. 61.42" H x 22.05" W x 19.88" D open and 69.45" H x 22.05" W x 7.28" D folded . Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification.
Werner 7306 Single Sided Step Ladder Louisville FS1508 Extra Step Ladder Werner Old Blue Single Sided Step Ladder
Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide.
DeWalt DXL3010-08 Step Ladder Werner T6006 Twin Ladder Louisville FM1500 Twin Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8".
LADDER IA FBRGLS CRSS-STEP 8FT Werner 6208 Single Sided Step Ladder Werner 7406 Extra Step Ladder
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards.
Werner T6206 Twin Ladder Werner Old Blue Single Sided Step Ladder Werner 7308 Single Sided Step Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Customized HolsterTop with lock-in accessory system secures tools from falling. Convenient conduit cutting system. Built-in wire spool holders allow for even pulling from both large and small spools. Rugged professional grade bracing. 3 ToolLasso included. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16.
Louisville FT1000 Tripod Ladder DeWalt DXL3810-06 Step Ladder Werner T7406 Multi-Use Twin Step Ladder
Non-conductive. Includes steel reinforced outrigger, center-pull spreader brace, outrigger rail brackets, double-rivet step construction, heavy duty steel gusset bracing and full metal boot. Meets  or exceeds the safety standards set by ANSI and OSHA. 3" steps. Dimensions: 14" x 6-1/2" top, 3-1/8" x 1-1/8" front rails, 1-1/2" square. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide.
Werner 7408 Extra Step Ladder Louisville FM1500 Twin Step Ladder Werner T6008 Twin Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Non-conductive. DA BOOT, a polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Heavy gauge steel hinges. Reinforced bottom step. Inside spreader braces. Full channel fiberglass rail. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: 12-3/4" x 9" top, 3" x 1-1/2" steps, 3-1/8" x 1-1/8" rails and flange 3-1/8" x 1-1/8". Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide.
Werner T6208 Twin Ladder Louisville FS1510 Extra Step Ladder Werner 6210 Single Sided Step Ladder
Twin front is designed for use by two people, one on each side. Features high performance dual holster top, paint and tool holder. Four rivets attach top to each front rail. All steps are knee braced. Heavy duty internal spreaders. Double riveted, slip-resistant Traction-Tred steps. Edge molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage. Every rivet is backed up by a metal part or washer to protect side rails. Orange fiberglass side rails and heavy gauge plastic top distinguish ladder. Steps are on both sides of this quality Werner ladder. Front and rear rails are made of 3-1/8" wide fiberglass with a 1-3/16" flange. Non-conductive fiberglass rails feature a non-irritating fabric out mat which assures a smooth trouble free surface even after weathering. Complies with OSHA. Ladder includes pinch proof solid internal steel spreaders, and Ribbed slip resistant rubber foot pads that are protected by an aluminum shoe. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
Werner 6212 Single Sided Step Ladder DeWalt DXL3010-10 Step Ladder LADDER IA FBRGLS CRS-STEP 10FT
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Werner 7410 Extra Step Ladder DeWalt DXL3810-08 Step Ladder Werner T7408 Multi-Use Twin Step Ladder
Heavy gauge Tool-Tra-Top. Back-up plates reinforce all top connectors. Slip-resistant Traction-Tred steps are double riveted and knee-braced. Shoe pads riveted to the edge structure. Aluminum external rail shield helps protect against abrasion damage. The edge bracing system helps to decrease damage to rail. Glas Mark violator strips on rails allow ladder to be more visible. Full set of rear horizontals are knee braced and spaced one per foot. Extra heavy duty internal spreaders. Shoulder bolt and lock nut on tope hinge. 4 solid aluminum rivets attach top to each front rail. Every rivet backed up by metal part or washer to protect rails. Dimensions: Front rails 3-1/8" wide, front flange 1-3/16" wide, rear rails 1-7/8" wide, rear flange 1-3/16" wide, top 7-1/4" wide x 14-7/8" long, steps 3" wide. Meets ANSI and OSHA Standards. Expand work step with 25-percent greater step surface, 3.75" step size. Metal top complete with tool slots and magnet. Wrap-around internal spreaders for strength and durability. Impact absorption system protects against damage. Heavy-duty boot with maximum slip-resistant surface area. Orange, electrically non-conductive side rails, heavy gauge aluminum extrude top, thick side plates. Shoulder bolt and lock nut on top hinge; 4 solid aluminum rivets attach top to each rail. Back-up aluminum plates reinforce all top connectors. Extra heavy duty internal spreaders. Slip-resistant traction-tred steps are double riveted and knee-braced. Aluminum external rail shields help protect against abrasion damage. Rubber step bumpers to resist damage. The edge bracing system helps to decrease damage to rail. Shoe pads riveted to the edge structure. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/4" x 14-1/2", step 3" wide. Rails 3-1/8" wide, flange 1-3/16" wide.
Louisville FS1512 Extra Step Ladder LADDER IA FBRGLS CRS-STEP 12FT
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
   
 
1