Home > PAINT & SUNDRIES > SUNDRIES > CAULKING > CAULK - BUTYL
Sort By:
1
Frost King C21H Caulk Saver M-D 71464 Backer Rod Frost King C22H Caulk Saver
Poly foam caulk savers are used behind caulks to fill wide cracks and save on caulk. Non-absorbent, closed-cell polyethylene pre-caulking material helps repel moisture. Use before caulking to fill gaps and openings larger than 1/2" x 1/2". Prevents 3-point bonding. Poly foam caulk savers are used behind caulks to fill wide cracks and save on caulk.
M-D 71480 Caulk Backer Rods Staples Decto Stick Blendable Wood Scratch Repair Kit Frost King C23H Caulk Saver
Non-absorbent, closed-cell polyethylene pre-caulking material helps repel moisture. Use before caulking to fill gaps and openings larger than 1/2" x 1/2". Prevents 3-point bonding. For nicks and gouges on furniture and woodwork. Selected wood tones that blend (without heat) to match any wood shade of furniture, hiding nicks and scratches without refinishing. Kit includes one of each color: Dark Brown, Dark Mahogany, Maple, and Light Mahogany. Poly foam caulk savers are used behind caulks to fill wide cracks and save on caulk.
M-D 71506 Backer Rod Dap 18026 Caulk-Be-Gone Caulk Remover White Lightning 8803030 Flamebuster Heat Fire Block Sealant
Non-absorbent, closed-cell polyethylene pre-caulking material helps repel moisture. Use before caulking to fill gaps and openings larger than 1/2" x 1/2". Prevents 3-point bonding. Specially formulated to soften caulk for easy removal. Fast acting, works in as little as two hours. Does not harm surfaces. Fresh scent. Noncombustible caulk designed to resist high-temperatures and smoke in non-rated construction. Blocks drafts, smoke and fire. Use around wires, pipes, ducts and vents. Resists temperatures up to 1,380 degrees Fahrenheit. Meets ASTM specifications E-136.
Guardsman 465200 Non-Toxic Touch-Up Marker Guardsman 500300 Wood Filler Motsenbocker's Lift Off 407-45 Tape Remover
Fast and easy touch-up of nicks and scratches with professional looking results. Three pens (light, medium, and dark) work with a wide variety of finishes. Unique dyes blend in with surrounding wood. Fills in deep scratches, gouges and nail holes. For touch-up and repair of finished wood or simulated wood furniture, antiques, woodwork, picture frames, cabinets, counters, doors, floors, paneling and molding. Colors matched to the most popular wood finishes. Includes 5 filler sticks and a sharpener. Won't shrink, dry out, discolor or rub off. Works on carpet, fabric, pre-wash on clothes, furniture and walls. Removes chewing gum, crayon marks, fried foods, grease, lipstick, motor oil, pitch, sap, stickers, tape, bugs and more. Low-VOC solvent-based cleaner.
Motsenbocker's 411-45 Caulk/Foam Sealant Remover Sashco 13033 Lexel Caulk Sashco 13013 Lexel Caulk
Works on latex, silicone, caulking, foam sealant, expansion foams, construction adhesives and polyurethane glues. Cleans tile, porcelain, stainless steel, hand tools, marble, hard surfaces, hands, wood, plastic, ceramic, carpet, vinyl flooring, fabric, foam application equipment, metal, Formica, glass stone, granite and more. Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Works in standing water and freezing temperatures. Will not rip apart the substrate when the joint expands. Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Works in standing water and freezing temperatures. Will not rip apart the substrate when the joint expands.
Wood Finish 63490 Oil Based Stain Marker Minwax Wood Finish Stain Marker Minwax Wood Finish Stain Marker
For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects.
Minwax Wood Finish Stain Marker Minwax Wood Finish Stain Marker Minwax Wood Finish Stain Marker
For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects.
Minwax Wood Finish Stain Marker Minwax Wood Finish Stain Marker Sashco 13043 Lexel Caulk
For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. For quick and easy touch-ups of nicks and scratches on wood furniture, moldings, cabinets, doors, floors and other wood surfaces in your home.  This stain pen contains real Minwax Wood Finish stain.  They are also ideal for small hobby and wood craft projects and to add decorative touches to large projects. Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Works in standing water and freezing temperatures. Will not rip apart the substrate when the joint expands.
Quikrete 6917-42 Backer Rod Rectorseal 66648 Firestopping Sealant WOOD REPAIR KIT 8PC
WOOD REPAIR KIT 8PC
Our Price: $6.97
Use to insert into a joint to control sealant depth, to create a backstop, allow proper sealant tooling, allow proper sealant wetting of the joint surfaces and use as a temporary seal. One component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. No-sag caulking grade sealant. Cures to an elastomeric seal that is suitable where dynamic movement is expected. 10.3 ounce covers 18 cu. in. Contains 4 Touch-Up Markers, Filler Sticks and 1 sharpener. Color-fast and long-lasting. Use Touch-Up Markers to hide scratches, chips/worn edges. Blend multiple colors to match finish. Use Filler Sticks to fill deep scratches, gouges/nail holes. Colors: Light brown, medium brown, dark brown, black.
Sika 108130 Caulk Backer Rods Rectorseal RS 136 Draft Stop/Fire Block Caulk 3M FB 136 Fire Block Sealant
Use to partially fill deep cracks or joints before applying sealant. 3/4" closed cell. To be applied to 1/2 in. width joints and below. Inorganic and has no volatile solvents which makes it particularly useful when installing in confined spaces or occupied areas. Does not have asbestos fillers. A single component system, no mixing necessary and no required additives. DOT Classification is not regulated. General purpose, residential acoustical caulk for electrical, plumbing, plastic pipe and telephone communication systems penetrations. 10.3 ounce covers approximately 18 cu. in. Designed to resist high temperatures and smoke passage in non-rated construction. Can be used with a standard caulking gun, or pneumatic pumping equipment. Easily applied with a putty knife or trowel. Fast-dry, tack-free in 15 minutes. Gray in color. Meets ASTM E - 136, 2003 IRC, 2003 IBC.
Rust-Oleum 248879 Fast Acting Decal and Adhesive Remover De-Solv-It 22608 Citrus Solution Seal-N-Peel 18354 Removable Weatherstrip Caulk
Quickly removes bumper and window stickers and adhesive residue. Recommended for use on glass or bumpers made of plastic or metal. Clings to vertical surfaces, removes bumper stickers. Use outdoors or in a well-ventilated area such as an open garage. Starts working in ten minutes. Removes adhesive, fresh blood, crayons, candle wax, tree sap, oil, tar, soap scum and more from any surface even laundry. Citrus scent. Use to seal drafty windows and doors. Saves energy and reduces utility costs. Provides a temporary waterproof and weatherproof seal. Peels away easily when removal is desired. Won?t damage painted surfaces.
De-Solv-It 10022 Contractor Solvent Motsenbocker's Lift Off 407-01 Tape Remover DAP Wood Awake Furniture Touchup Kit
Removes adhesives, asphalt, blacktop, caulk, grease liquid foam, liquid insulation, cable jelly, tub scum, oil-based stain, road and roofing tar and much more. Safe to use on hard surfaces, block/brick, cured paint, metal, wood and even hair and skin. Non-hazardous and non-corrosive. Citrus scent. Breaks the Molecular Bond for fast and easy removal of painter?s tape, duct tape, mounting tape, weather stripping tape, spray adhesives, stickers, labels, chewing gum, sticky residues, wax, and glue from hard surfaces. Low VOC formula. Use to repair scratches on woodwork, furniture, and paneling. Contains two spatulas and two wood stain pens, for light and dark woods, plus four colored blending sticks.
3M IC15 WB+ Fire Barrier Sealant Rectorseal 66640 Metacaulk 1000 Firestopping Sealant White Lightning 8802020 Flamebuster Heat Fire Block Sealant
Designed for use as a one-part fire, smoke, noxious gas and water resistant sealant. Easy cleanup no special handling, routine disposal. Intumescent,  Fast dry, tack-free, in 8-12 minutes. Paintable after 72 hour cure. Meets ASTM E 814 and ASTM E 1966. One component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. Extremely intumescent, non-sag caulking grade sealant. Cures to an elastomeric seal that is suitable where dynamic movement is expected. 10.3 ounce covers about 18 cu. in. Designed for wall and floor applications in UL rated construction. Use on aluminum, pre-cast concrete gypsum, wall board, power/communication cables and aluminum/galvanized steel cable trays, static/non-static pipes and conduits, CPVC, PVC, and steel. Resists cracking. Forms pressure tight seal resistant to water, smoke and toxic gases. Withstands temperatures up to 300 degrees Fahrenheit. Can be applied at temperatures from negative 20 degrees Fahrenheit to 122 degrees Fahrenheit. Meets ASTM E-814 (UL1479) and FBC System Compatible. ASTM specifications C-920, Type S, Grade NS, Class 25.
ADHESIVE/PAINT REMV INSTA LIFT 3M CP25WB Fire Barrier Caulk Sashco 12010 Tintable Exact Color Caulk Kit
Forms a tight barrier against fire, smoke and toxic fumes. Suitable for a wide variety of through-penetration fire stops, including cable, metal pipe, insulated pipe, glass pipe, construction gaps, HVAC ductwork and certain plastic pipe applications. Cures to form a flexible seal, installs with a standard caulking gun, pneumatic pumping equipment or putty knife. ASTM, FM and U.L. tested for 3 hour fire penetration seal for walls and floors. Create your own custom color caulk, in minutes, by adding latex paint, water-based solid stain or universal pigments.  Kit contains everything you need to make any color caulk, with the same great properties of Big Stretch.  Great for backsplashes, moulding, trim, siding, and accent walls.  Includes cartridge of liquid caulk, syringe to inject your paint, thickener, cap and nozzle. Meets the performance requirements of ASTM C-834.
Quick R BR58060 Caulk Backer Rods Quick R BR38120 Caulk Backer Rods Quick R BR78040 Caulk Backer Rods
Use before applying caulk on new construction or remodeling. For walls, floors, trim, sidewalks, windows and doors. Closed-cell. Use before applying caulk on new construction or remodeling. For walls, floors, trim, sidewalks, windows and doors. Closed-cell. Use before applying caulk on new construction or remodeling. For walls, floors, trim, sidewalks, windows and doors. Closed-cell.
De-Solv-It 10131 Contractor Solvent 3M 6040 Flammable Adhesive Remover Dap 18806 Fire Stop Fire Barrier Sealant
For contractors and customers to aid in removing silicone sealant, PVC adhesive and liquid foam. Safe way to remove adhesives, tar, asphalt, oil-based paint and more from virtually any surface including skin and hair. Non-hazardous, non-corrosive, and a highly safer alternative to acetone, paint thinners and other tradition solvents. Citrus-based, solvent-free remover can be used to remove overspray or residual spray from 3M spray adhesives; tape residues from masking, foam or duct tape; caulk; silicone-based products; heavy oils; grease and grime. (Not recommended for use on plastics). Leaves surfaces clean and dry with no residue. Classified for sealing fire-rated non-combustible service penetrations and construction joints in horizontal and vertical fire separations. Single component silicone fire barrier for sealing around piping and wiring penetrations through fire-rated walls and floors. U.L. Listed; meets ASTM Specifications E-814, UL1479 and UL2079.
Dap 18858 Blockade Fire/Smoke Sealant 3M 1000NS Water Tight Fire Barrier Sealant Rectorseal Metacaulk MC150 1-Component Firestop Sealant
Used for all combustible and non-combustible penetrations, excellent adhesion to unprimed surfaces. NS Series- No slumping of vertical joints, gravity will hold positioning. Ready to use with a standard or bulk caulking gun or pneumatic pumping equipment. Cures in 20-40 minutes. Used to firestop openings and penetrations on fire rated floor stabs, walls, other building partitions and assemblies. Helps control the spread of fire, smoke and noxious gases. Meets ASTM Specification C920, Type S, Grade P, Class 25. One component, general purpose fire rated sealant and smoke seal for construction joints and through-penetrations. No-sag caulking grade sealant. Cures to an elastomeric seal that is suitable where dynamic movement is expected. 10.3 ounce covers 18 cu. in.
HEAT GUN DUALTEMP KIT W/ACC   3M 08984 Adhesive Cleaner HEAT GUN 300 DUAL TEMPERATURE
For stripping paint and varnish, softening caulk and putty for removal, removing adhesive labels. Thawing pipes, gutters, freezers, or radiators. Loosening rusted nuts and bolts. Speed-drying epoxy, cement, or any damp surface, and more. ETL Listed. Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle. Air reduction nozzle concentrates heat. Deflector nozzles protect glass and other surfaces. Reflector nozzle speeds thawing of pipes. 3-position rocker type switch for high temp, off and low temp. Rated Voltage: 120V AC, 60HZ. Rated Input Power: 12.5 Amp. Output: 750/1500 Watts. Air Temperature: 572 /1000-degrees F. Air Volume: 10/17 cu. Ft. per min. Use to cleanup most types of adhesives, bugs, greases and oils, overspray, silicone, waxes and tars. Ideal for removing paint and flooring, bending plastic, and thawing pipes. It has two temperature settings, 750F and 1100F, that are suitable for a majority of heating applications. 1200 watts/4100 BTUS. Ergonomic design for comfort and balance to reduce fatigue. Side bars prevent the hot nozzle from touching the work surface. Integrated stand for safe hands-free operation. Hanging loop for safe storage during cool-down.
Black And Decker HG1300 Heat Guns M-D Building Products Pro Pack Backer Rod De-Solv-It 10151/52 Biodegradable Contractor Solvent
Two heat settings for a variety of application. Lightweight and easy to use one handed. Built-in stand for easy cool-down. Specs: 120-watt, 750 to 1000 degrees Fahrenheit air temperature. 8.8 to 12 CFM air flow. Double insulated, U.L. Listed. 6' cord. Fills gaps and openings to prevent drafts. Provides a sound surface for caulking projects. For removing carpet and floor adhesives, caulk, silicone, roofing tar and other tough challenges from any surface, even skin and hair. No harmful vapors. Also removes wet oil-based paint, stain and lacquer and more. Non-hazardous, non-corrosive, and a highly safer alternative to acetone, paint thinners and chlorinated solvents. Biodegradable.
3M CP-25WB Fire Barrier Sealant Wagner 0503040 Heat Guns HEAT GUN 500 LED VARIABLE TEMP
Provides up to 4-hour protection in tested and listed systems. Penetrates through fire-rated construction assemblies. Dries to red color, no mixing required. Helps prevent the spread of fire, smoke and noxious gas. Acts as an acoustic barrier by minimizing noise transfer. Helps create a smoke seal for systems requiring the optional L-Rating. Meets the intent of LEED VOC environmental regulations, international building code and other key life safety building code requirements. Provides 12 distinct temperature settings from 250 to 1350 degrees Fahrenheit. Adjust temperature for any application such as removing flooring and paint, heating window shrink covering, electrical shrink tube and frozen water pipes, loosening rusted nuts and bolts, molding/bending plastics, waxing skis, defrosting refrigerator/freezer and sealing ends of nylon rope. Digital Touch-pads with LED indicators. Cool-down setting with automatic shut-off. 2 fan speeds. 2 year warranty. 1500 watts/5100 BTU. Versatile tool that can be used for removing paint, drying spackle, thawing pipes, and removing vinyl decals. Has 12 temperature settings that range from 150F to 1200F. This multi-setting tool allows the user to set the temperature for a particular project. Includes graphic LED screen with push-button controls, 2 fan settings plus cool down mode, and durable ceramic element. Ergonomic design for comfort and balance to reduce fatigue. Side bars prevent the hot nozzle from touching the work surface. Integrated stand for safe hands-free operation. Soft-grip handle for comfort. 1500 watts/5100 BTUS. Hanging loop for storage.
Porter-Cable PC1500HG Heat Guns M-D Building Products Pro Pack Backer Rod Red Devil 0697 Gutter And Foundation Sealant
Variable temperature dial allows for easy adjustment of temperatures. Integrated support stand allows the gun to sit upright for hands free use. Use integrated hanging hook for storage. 1500 watts deliver high heat and multiple fan settings. 6ft high grade cord improves flexibility during cold use. Weighs 2 lbs. Fills gaps and openings to prevent drafts. Provides a sound surface for caulking projects. For jobs requiring a durable watertight seal. Use around concrete foundations and expansion joints, around gutters and in below-grade areas such as basements. Adheres to most construction surfaces and remains flexible.
M-D Building Products Pro Pack Backer Rod OSI 1925252 Window and Siding Caulk Klean-Strip QKAS94326 Adhesive Remover
Fills gaps and openings to prevent drafts. Provides a sound surface for caulking projects. One component, medium grade, solvent release caulking compound. Cures to form a tough elastomeric seal that maintains its bond under most weather conditions. Developed to eliminate the problems of extrusion, cut-off, stringing and dirt collection. No tooling need when applied as directed. All-season formula. Extrudes easily between 0-degrees and 100-degrees Fahrenheit. Paintable after curing. Do not use in cracks or joints exceeding 3/8" wide by 3/8" deep. Meets federal specifications TT-S-001657, Type 1 and ASTM C 920-79, Type S, Grade NS, Class 12 1/2, Use T. Handles the toughest removal jobs. Softens old floor covering adhesives, mastic, contact cement, asphalt and latex adhesives for easy removal. Works on concrete, metal, wood and more. Nonflammable.
HEAT GUN 700 LCD VARIABLE TEMP Henkel 1496542 Pro-Series - Sc-175 Acoustical Sound Sealant Dewalt D26950 Heat Guns
The broad temperature range makes it ideal for a variety of projects, such as softening putty and caulk, stripping paint, and thawing frozen pipes. 117 temperature settings range from 125F to 1300F. 5 fan speeds plus cool-down setting. 1500 Watts/5100 BTUs. Durable Ceramic Element. LCD Display screen with push-button controls. Ergonomic Design for comfort and balance to reduce fatigue. Side Bars prevent the hot nozzle from touching the work surface. Integrated Stand for safe hands-free operation. Soft-Grip Handle for comfort. Hanging Loop for storage. Includes 2 nozzles & a 5-in-1 painter?s tool. For the reduction of sound transmission in all types of wall partition systems. Remains flexible and adheres firmly to wood or metal studs, concrete, gypsum board and most other types of building substrates. Maintains a tough rubber-like seal against air-borne sound, air infiltration and moisture. Non-flammable. UL tested and classified. Will not harden, crack or separate. Non-staining and non-migrating.  3/8" bead covers approximately 40 lin. ft. and 1/4" bead covers approximately 89 lin. ft. Built-in overload protection shuts the heating element down and prevents burn up. Built-in hang ring adds a storage feature. Built-in kickstand support provides greater stability and prevents tip over. Cord protector keeps the cord from tearing away from the housing. Ergonomic comfort grip. Separate internal components allows maintenance on both the motor and heating element. Specs: 1550 Watts, 120 Volts, 13 Amps, 120 to 1100-degrees fahrenheit, 16CFM and 10 Ft power cord. Includes cone nozzle and Fishtail surface nozzle.
Milwaukee 8975-6 Heat Guns ADHESIVE REMOVER LOW VOC QT   Geocel 10100 Watershield Caulking Sealant
Offers ergonomic style and impact resistant heating element. Soft air velocity increases surface temperature. Stay cool handles and heat shields. Three position rocker switch- off, high and low. Specs: 120-Volt AC, 11.6 amp motor, 570 to 1000-degrees fahrenheit air temperature, 14.8 cu. ft. min. air volume, 10-1/8" tool length. 1.6 lbs. tool weight. For removing adhesives from wood, concrete, metal and masonry.  It contains no methylene chloride, is low V.O.C., non-caustic, and biodegradable. Stays wet and active for up to 24 hours, allowing stripping of large areas in one step. With a thick coat, it can be allowed to work overnight. Removes most mastics, contact cement, floor covering adhesives, asphalt & latex adhesives in 1 to 3 hours. Covers 10-15 sq. ft. per quart. No-sag 100-percent resealable sealant for use in most moving and non-moving joints. Use for non-traffic bearing joints and where a paintable, non-staining sealant is desired. May also be used for primerless brick, limestone, marble, granite, concrete, ferrous and non-ferrous metals, glass and untreated woods.
Geocel 10101 Watershield Caulking Sealant Sashco 15010 Mor-Flex Mortar/Stucco Repair Sealants Sashco 15020 Mor-Flex Mortar/Stucco Repair Sealants
No-sag 100-percent resealable sealant for use in most moving and non-moving joints. Use for non-traffic bearing joints and where a paintable, non-staining sealant is desired. May also be used for primerless brick, limestone, marble, granite, concrete, ferrous and non-ferrous metals, glass and untreated woods. Use on brick, stone, stucco, concrete and other masonry surfaces, even when sealing against wood. Repairs interior and exterior cracks and gaps. Extreme elasticity to handle movement. Looks like Mortar but stretches like rubber. Will span up to a 3" gap, paintable sandy texture to blend in. Cleans up with soap and water. Surface application range of 40 to 90 degrees Fahrenheit. Service range from minus 30 to 250 degrees Fahrenheit. Use on brick, stone, stucco, concrete and other masonry surfaces, even when sealing against wood. Repairs interior and exterior cracks and gaps. Extreme elasticity to handle movement. Looks like Mortar but stretches like rubber. Will span up to a 3" gap, paintable sandy texture to blend in. Cleans up with soap and water. Surface application range of 40 to 90 degrees Fahrenheit. Service range from minus 30 to 250 degrees Fahrenheit.
Sashco 13010 Lexel Caulk Sashco 13030 Lexel Caulk Klean-Strip GKAS94325 Adhesive Remover
Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Will not rip apart the substrate when the joint expands. Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Will not rip apart the substrate when the joint expands. Handles the toughest removal jobs. Softens old floor covering adhesives, mastic, contact cement, asphalt and latex adhesives for easy removal. Works on concrete, metal, wood and more. Nonflammable.
Sashco 13080 Lexel Caulk HEAT GUN COMPACT              Henkel 1390035 Greenseries - Flameseal Fire/Smoke/Draft Stop Sealant
HEAT GUN COMPACT
Our Price: $119.08
Co-polymer rubber-based sealant. Bonds to almost any surface including wallpaper, trim countertops, tubs, tile, windows, doors, etc. Adheres to acrylic, copper, most plastics, polycarbonate, polystyrene and more. Paintable. Will not rip apart the substrate when the joint expands. Powered by REDLITHIUM battery technology, it is able to heat over 40 connections on a single XC5.0 battery. Features: High Performance Heating Coil: Reach operational temperature in 7 seconds; REDLINK Intelligence: Temperature management system provides maximum life; Compatible with all M18 REDLITHIUM Battery Packs; 6.4? long; Guarded Nozzle: Increased protection for work surfaces; Ladder Hook: Easily hang between applications; LED Light. Used to seal service penetrations and joints in fire separations and firewalls. Stops flame, smoke, and fumes under actual fire conditions. Easy to apply and cleanup, contains NO asbestos, paintable after cure. Nonflammable, provides a fireproof acoustic seal. GREENGUARD approved, meets LEED requirements.
   
 
1