Home > PAINT & SUNDRIES > SUNDRIES > CONSTRUCTION ADHESIVES > ADHESIVES - VINYL TILE
Sort By:
1
ITW Devcon 18045 Contact Cement Titebond PROvantage Proprietary Synthetic Polymer Subfloor Adhesive ADHESIVE SUBFLOOR 4000 10.3 OZ
Make a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Bonds similar and dissimilar materials as soon as the two surfaces are joined. 700 psi bond strength. Dries amber, sets in 5 minutes. High-performance. For subfloor installations and general plywood use. Offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors. Can be easily extruded from 0 degree fahrenheit - 100 degree fahrenheit for applications in various climates. 10oz. Coverage: 123 feet using 1/8" bead, 30 feet using 1/4" bead, 13 feet using 3/8" bead. 28oz. Coverage: 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute on 1/4" bead. Exceeds the requirements of APA's AFG-01 ASTM D3498 and ASTM C557. Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified.
ADHESIVE SUBFLOOR 10.3 OZ     ADHESIVE ADV SUBFLOOR 10.3 OZ Loctite PL 520 Mirror?Adhesive
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01. Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors.
Henkel 1911051 Greenseries Construction Adhesive GREENchoice 4122 Weatherproof Subfloor Adhesive ADHESIVE SBFLR LATEX VOC 28OZ
Used for glued floor projects and deck constructions. Works well for general needs such as paneling, wood or pre-decorated foam panels, trim molding, and various wall tiles. Helps reduce squeaks and sound transmission. Fast set, fast cure, high bond strength, water and weather resistant, and easy cleanup. Meets AFG-01, ASTM D 3498, GREENGUARD certified, LEED requirements. Designed for subfloor installations and plywood use. Reduces the amount of nailing and helps eliminate squeaky floors.  Fills gaps and irregularities between materials. Not designed for continuous submersion. 100-percent solvent-free and contains no ozone-depleting chemicals. Nonflammable formula with no offensive odor offers freeze/thaw stability and cleans up with water before setting. 10 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead. 89 ft. with 1/4" bead and 39 ft. with 3/8"bead. Passes the requirements of APS's AFG-01 specifications and ASTM C557. Prevents floor squeaks. Adheres to wet and frozen lumber. High strength bond. Meets ASTM D3498 and APA AFG-01.
Henkel 1498717 Greenseries Drywall/Panel Adhesive Titebond PROvantage Proprietary Synthetic Polymer Subfloor Adhesive Liquid Nails LN-930 Mirror Adhesive
Drywall & Panel Construction adhesive is best suited for bonding drywall to wood. Works well on foamboard, decorative panels, furring strips, concrete walls or drywall. Non-flammable, environmentally friendly, ultra low VOC, fast set, fast cure. GREENGUARD approved.  Meets LEED requirements. Not recommended for use on mirrors or underwater applications. High-performance. For subfloor installations and general plywood use. Offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors. Can be easily extruded from 0 degree fahrenheit - 100 degree fahrenheit for applications in various climates. 10oz. Coverage: 123 feet using 1/8" bead, 30 feet using 1/4" bead, 13 feet using 3/8" bead. 28oz. Coverage: 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute on 1/4" bead. Exceeds the requirements of APA's AFG-01 ASTM D3498 and ASTM C557. This flexible, permanently bonding construction adhesive will not damage reflective backing. Heat and steam resistant. Synthetic rubber/resin formula. Covers 30 lineal ft. using 1/4" bead for 10 fl. oz.
Loctite PL 500 Landscape Block Adhesive ADHESIVE TUB SURROUND 10.3OZ  Dap 00102 Weldwood Contact Cement
Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear. Forms instant, high strength bonds on a variety of surfaces. Use in the home, office or workshop. Form strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times. For bonding plastic laminate for counters and tabletops, rubber, wood and plastic veneers, cork, metal, wood, leather and other porous and nonporous materials. Neoprene rubber. Resists the effects of heat, water, weather, grease, oil and household chemicals. Spreads easily, dries tack free quickly and offers a 2 hour open time.
Franklin 5342 Provantage Drywall Adhesive ADHESIVE MIRROR/MARBLE 10OZ   Henry 430 ClearPro Thin Spread Floor Tile Adhesive
A high-performance, formula specifically designed for installing drywall and paneling to most common building materials, including wood and metal. It offers excellent adhesion, reduces nail pops and provides a no-sag installation. Fills gaps in substrates, providing a more solid backup surface and reducing sound transmission. It is unaffected by moisture and resists aging, it will not become hard or brittle with age. Covers 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute a 1/4' bead. Exceeds the requirements of ASTM C557 and has been tested in accordance with E72 for racking and shearing. Premium grade hybrid adhesive specifically formulated for mirror and countertop installation. Provides a permanent vertical hold in one hour ideal for mirror installation. Easy to gun and will not stain or damage mirrors, countertops or finished surfaces. High strength adhesive that delivers adhesion on porous/non-porous construction materials. Meets or exceed ASTM C557. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile.
ADHESIVE DRYWALL 28 OZ        ADHESIVE SUBFLOOR 28 OZ       Leech X30-74 X30 Contact Cement
Premium grade adhesive specifically formulated for drywall installation. Prevents nail pops and helps limit air and sound movement between walls. Easy to gun adhesive that delivers a strong permanent bond. Instant grab. Exceeds ASTM C557 Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01. High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline.
Dap 00107 Weldwood Contact Cement WW Henry 663-034 Carpet Adhesive Purdy 068010 Brush Cleaning Comb
Forms instant, high strength bonds on a variety of surfaces. Use in the home, office or workshop. Form strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times. For bonding plastic laminate for counters and tabletops, rubber, wood and plastic veneers, cork, metal, wood, leather and other porous and nonporous materials. Neoprene rubber. Resists the effects of heat, water, weather, grease, oil and household chemicals. Spreads easily, dries tack free quickly and offers a 2 hour open time. Use for the installation of outdoor carpeting. Bonds to concrete, asphalt paving and other clean, sound paving surfaces (not asphalt roofing), exterior or marine grade plywood decking which is sound and not subject to deterioration (not plank decking or treated wood), aluminum boat decks which are clean and roughened, fiberglass which has been roughened, substrates which have been painted, stained, or otherwise coated must be tested to assure compatibility with the adhesive. Water-resistant. Strong initial grab. No open time required. Long working time. Excellent bond integrity and trowelability. Temperatures should be 65-degrees Fahrenheit (18-degrees Celsius) or above in areas where adhesive is to be used. Covers approximately 90 to 108 sq. ft. per gallon using a 1/8" x 1/16" x 1/8" trowel. Proper tool maintenance is  vital, including cleaning and storage. Effectively clean all paints from the heel of the brush, prolongs its useful lifespan. Hardwood.
Flood FLD6-01 Sand Texture Additive ADHESIVE SUBFLOOR POLYU 28OZ  Loctite PL 500 Landscape Block Adhesive
For latex and acrylic paint. Enriches the performance of latex/acrylic paint and keeps projects flowing smoothly. Gives latex paint the feel of oil paint, without the clean-up hassles. Reduces tip clogging and piston freeze-up with cup gun spraying. Makes latex paint spray like oil paint with approximately 20 percent less pressure. Can be used in most interior and exterior construction projects either on the job or the production line. It bonds all wood to wood assemblies dry, wet or frozen. Primarily designed for on-site bonding of subfloor and plywood decking to joists during cold weather. Suitable for subfloor, glued floor systems, tongue-and-groove flooring, standard wood construction, concrete, masonry, and wood-to-wood assemblies. Ideal for use in prefab or modular construction. Bridges minor framing gaps. Helps reduce squeaky floors. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16).
Wooster Painter's Comb Double Sided Brush Comb Dap 00271 Weldwood Contact Cement The Flood FLD4-01 Sand Texture Additive
Two-sided tool improves paintbrush cleaning. Non-rusting brass bristles gently removes heavy paint buildup. Stainless steel comb has 12 pins to speed the wash and rinse steps. Also reshapes the paintbrush prior to storage. Durable polypropylene handle, overall 8 1/4" length. Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon. For oil and Alkyd paint. Enhances penetration and adhesion of oil-based paints and primers. Use to make interior painting projects flow more smoothly. Use with oil or alkyd paints. Reduces brush marks and leveling problems with the paint. Reduces fatigue and frustration with painting projects.
CLEANING TOOL PANT 3N1        BRUSH  ROLLER COVER CLEANER   Surebond EVERSEAL 1-Part Adhesive Sealant
CLEANING TOOL PANT 3 IN 1
Our Price: $10.72
Use to clean paint brushes and roller covers. Removes brush floating filament. Made from nylon-fiberglass material. Can be used to clean all standard roller cover. Remove excess paint from roller covers. Use to clean paint brushes and roller covers. Removes brush floating filament. Made from nylon-fiberglass material. Can be used to clean all standard roller cover. Remove excess paint from roller covers. One-part sealant for many industrial applications such as automotive, construction, roofing, marine, etc. Can be used to adhere the clear snow guard (SKU# 0581165) to metal roofing. Bonds to plastic, fiberglass, metal, wood, cement, etc. Versatile, flexible and hard setting. 50-degrees F minimum application temperature. Weather resistant. Paintable. 2000 PSI tensile strength. Translucent.
Leech X30-77 X30 Contact Cement Dap 00272 Weldwood Contact Cement Henry 430 ClearPro Thin Spread Floor Tile Adhesive
High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline. Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile.
Dap 00442 Weldwood Carpet Adhesive Dap 25312 Weldwood Contact Cement WW Henry 663-044 Carpet Adhesive
Use to permanently install outdoor carpet and artificial turfs. Withstands rain, snow, ice and freezing.  Resists curling. Rubber-based, fast grab formula. Covers approximately 12-16 sq. yd. per gallon on smooth backed outdoor carpet using a 3/32" x 3/32" x 3/32" V-Notch. Covers approximately 6-10 sq. yd. per gallon on textured backed outdoor carpet and artificial using a 1/8" x 1/8" x 1/16" V-Notch. Forms a permanent bond on a variety of surfaces. Instant adhesion eliminates the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Forms a durable, high strength bond when parts are assembled and momentary pressure is applied. Excellent for installing vertical and overhead surfaces. No drip, no mess formula, helps to control application. Coverage at 3 dry grams per sq. ft. is approximately 230 sq. ft. per gallon. Use for the installation of outdoor carpeting. Bonds to concrete, asphalt paving and other clean, sound paving surfaces (not asphalt roofing), exterior or marine grade plywood decking which is sound and not subject to deterioration (not plank decking or treated wood), aluminum boat decks which are clean and roughened, fiberglass which has been roughened, substrates which have been painted, stained, or otherwise coated must be tested to assure compatibility with the adhesive. Water-resistant. Strong initial grab. No open time required. Long working time. Excellent bond integrity and trowelability. Temperatures should be 65-degrees Fahrenheit (18-degrees Celsius) or above in areas where adhesive is to be used. Covers approximately 90 to 108 sq. ft. per gallon using a 1/8" x 1/16" x 1/8" trowel.
Majic Paints 8-0950-4 Sand Texture Additive Henry 444 FRP Installer Grade Panel Adhesive Valspar 4625 Enamel Hardener
Will accelerate dry time and improve the film properties of most conventional oleoresins, alkyd, or polyurethane coatings. Accelerates dry time by up to 40 percent. Increases hardness by up to 30 percent. Raises gloss by up to 10 percent. Improves resistance to chemicals and solvents. VOC compliant in most states. For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Enhances gloss & hardness. Reduces dry time. Use with tractor and implement enamels or oil-based enamels.
DAP Smartbond Gun Grade Subfloor Construction Adhesive Great Stuff Pro 343087 Grade Wall and Floor Adhesive Leech X30-78-6 X30 Contact Cement
Applies as a foam and transforms by collapsing into a high-strength, fast-curing adhesive gel. Polyurethane formula provides a strong, durable and permanent bond to a wide range of building materials. Bonds to wet, dry, frozen and treated lumber. Reduces nailing, floor squeaks and nail pops. Reusable for up to 30 days. Bridges gaps and voids. Exceeds ASTM D3498 shear strength tests. Single-component, moisture-cured foam adhesive, used to ashere subfloors, drywall, paneling, foam panels and most construction materials. Provides a fast-grab tack and long-term bond to lumber, plywood, particle board, masonry, drywall, concrete and foam panels. Offers bonding power on dry, damp and even frozen lumber, making it efective in a variety of weather conditions. For use with pro series gun. High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline.
Dap 25332 Weldwood Contact Cement OSI FRP555 Reinforced Panel Adhesive CLEANER PAINT BRUSH/ROLLER
A high solids, water based contact cement. Meets the stringent requirements of the professional user. Complies with all current VOC requirements. Dries in 30-40 minutes.  Works on a variety of surfaces. Heat resistant. Easy water clean up. Low odor. For bonding decorative laminates, paper backed, veneers, paper, cork, cloth, flakeboard, drywall, medium density fiber board, wood, plywood and cloth backed vinyl to itself of bonded to particle board. Coverage at 3 dry grams per sq. ft. is approximately 760 sq. ft. per gallon. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. Every painter appreciates quick easy cleanup. Regular cleaning with this patented tool also extends the life of brushes and rollers. Rust and chemical resistant.
WW Henry FP00176069 Bulldog Flooring Adhesive Loctite 1652275 Pl400 Professional Line Construction Adhesive Liquid Nails FRP-310 Fiberglass Rpp Adhesive
Use to install commercial carpet in light traffic areas or residential felt-back rotovinyl sheet flooring. Bond carpet backings (jute, polypropylene, and non backed needle-punched) and vinyl flooring to concrete, underlayments, wood substrates, terrazzo and existing resilient on all grade levels as recommended by the flooring manufacturer. 60-90 minutes working time. Covers 140-160 sq. ft. per gallon on residential felt-back rotovinyl sheet flooring and coverage for carpet installations is 90-108 sq. ft. per gallon. Formulated for a powerful permanent bond with all heavy duty construction, interior or exterior. For bonding wood, metal, concrete/masonry and FRP panels. Virtually unaffected by weather extremes. VOC compliant formula for California sales, meets stringent new California State CARB and Federal VOC Regulations. Meets or exceeds APA AFG-01, ASTM D 3498 and conforms to HUD requirements. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin ft. Strong-bonding, low odor, adhesive specifically formulated for bonding Fiberglass Reinforced Panels (FRP). Use to bond to cured concrete, wood, drywall, concrete backerboard, greenboard, foamboard, and non-reinforced panels. Meets or exceeds ASTM C-557 Specifications. One gallon covers 50 sq. ft.
Loctite PL 500 Tub Surround Adhesive Dap 25336 Weldwood Contact Cement ADHESIVE SUBFLOOR SOLVENT 28OZ
Fast-grab. Especially formulated for bathtub and shower surrounds. Engineered for all plastic panels, and provides a permanent bond in high-moisture conditions. A high solids, water based contact cement. Meets the stringent requirements of the professional user. Complies with all current VOC requirements. Dries in 30-40 minutes.  Works on a variety of surfaces. Heat resistant. Easy water clean up. Low odor. For bonding decorative laminates, paper backed, veneers, paper, cork, cloth, flakeboard, drywall, medium density fiber board, wood, plywood and cloth backed vinyl to itself of bonded to particle board. Coverage at 3 dry grams per sq. ft. is approximately 760 sq. ft. per gallon. Prevents floor squeaks. Adheres to wet and frozen lumber. High strength bond. Meets ASTM D3498 and APA AFG-01.
Liquid Nails DW-24 Liquid Nails Drywall Adhesive Dap 25117 4000 Construction Adhesive Henry 430 ClearPro Thin Spread Floor Tile Adhesive
Reduces the need for fasteners up to 50-percent. Minimizes nail pops, buffers sound and speeds drywall installation. GREENGUARD Gold Certified.  Covers 88 lineal feet with full round 1/4" bead. Exceeds ASTM C-557. Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile.
Liquid Nails LN-905 Landscape Block Adhesive Liquid Nails LNP-902 Liquid Nails Construction Adhesive Liquid Nails LNP-602 Liquid Nails Construction Adhesive
Prevents shifting and loosening of blocks, stones and timber due to seasonal changes. GREENGUARD Gold Certified. Covers 30 lineal feet with 3/8" bead. Helps eliminates squeaky floors. For plywood, waferboard, lumber & treated lumber, particleboard, OSB and foamboard. Bonds wet, frozen and treated lumber. Bridges gaps up to 3/8". Reduces nailing and squeaking. Meets or exceeds APA-AFG-01 and ASTM C-557. GREENGUARD GOLD Certified. A tough, weatherproof, solvent-based formula helps eliminate squeaky floors. Penetrates wet, frozen and treated lumber. Excellent bond strength, long term flexibility and excellent bridging capabilities. Reduces nailing, squeaks and nail pops. Exceeds requirements of ASTM C-557 specifications for field gluing of subfloors. Using a 1/4" bead: 10 fl. oz. covers 30 lineal feet and 28 fl. oz. covers 85 lineal feet.
Franklin 5492 Construction Adhesive Flood FLD6-01 Penetrol Paint Conditioner Henkel 1596529 Osi - Pro-Series Sf-450 Construction Adhesive
Designed for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Offers a strong initial tack, provides superior strength and remains permanently flexible. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Works well in colder temperatures. -20 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead, 89 ft. with 1/4" bead and 39 ft. with 3/8" bead. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. For latex and acrylic paint. Enriches the performance of latex/acrylic paint and keeps projects flowing smoothly. Gives latex paint the feel of oil paint, without the clean-up hassles. Reduces tip clogging and piston freeze-up with cup gun spraying. Makes latex paint spray like oil paint with approximately 20 percent less pressure. Bonds dry, wet, frozen and treated lumber to most building materials. Eliminates squeaky floors. All weather formula, waterproof and weatherproof. Formulated to eliminate roll-up on frozen lumber. Reduces sound transmission. Exceeds ASTM D 3498 and APA AG01 specifications. Extrude approximately 85.8 ft at a 1/4 bead and 38.1 ft. at a 3/8" bead.
Loctite 1602142 Pl400 Professional Line Construction Adhesive Loctite Power Grab Tub Surround Adhesive Henkel 1630096 Osi Drywall Adhesive
Formulated for a powerful permanent bond with all heavy duty construction, interior or exterior. For bonding wood, metal, concrete/masonry and FRP panels. Virtually unaffected by weather extremes. VOC compliant formula for California sales, meets stringent new California State CARB and Federal VOC Regulations. Meets or exceeds APA AFG-01, ASTM D 3498 and conforms to HUD requirements. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin ft. Designed to bond most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured. Has very low odor and requires only soap and water to clean up. Bonds most plastic (polystyrene, acrylic, ABS, PVC) bathroom and shower enclosures to waterproof drywall, DenShield gypsum board, wood, sanded Barker-Tile and sanded ceramic tile. GREENGUARD approved. Qualifies for LEED  points. Bonds gypsum board to wood metal studs, concrete or block walls. Eliminates nail pops, bridges minor framing gaps. Reduces fastener use, reduces sound transmission. Meets ASTM C 557-93A specifications.
Henry 444 FRP Installer Grade Panel Adhesive Dap 27042 7000 Construction Adhesive Franklin 5352 Drywall Adhesive
For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. Designed for applying drywall to wood, hardboard, gypsum wallboard, cold-rolled steel and aluminum. Strong initial tack allows the panels to be positioned quickly without slipping. Fills irregularities and gaps in substrates, providing a strong bond and a more solid backup surface. Exceeds the ASTM C557 specification. Covers approximately 355 ft. using 1/8" bead 89 ft, using 1/4" bead, and 39 ft. using 3/8" bead.
Liquid Nails LN-902 Non-Flammable Construction Adhesive OSI FRP555 Reinforced Panel Adhesive Liquid Nails LN-602 Liquid Nails Construction Adhesive
Helps eliminates squeaky floors. For plywood, waferboard, lumber & treated lumber, particleboard, OSB and foamboard. Bonds wet, frozen and treated lumber. Bridges gaps up to 3/8". Reduces nailing and squeaking. Meets or exceeds APA-AFG-01 and ASTM C-557. GREENGUARD GOLD Certified. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. A tough, weatherproof, solvent-based formula helps eliminate squeaky floors. Penetrates wet, frozen and treated lumber. Excellent bond strength, long term flexibility and excellent bridging capabilities. Reduces nailing, squeaks and nail pops. Exceeds requirements of ASTM C-557 specifications for field gluing of subfloors. Using a 1/4" bead: 10 fl. oz. covers 30 lineal feet and 28 fl. oz. covers 85 lineal feet.
DAP Weldwood Fiberglass Reinforced Panel Adhesive Liquid Nails LN-715 Low VOC Construction Adhesive Yenkin Majestic 8-0750-3 Paint Reducer
For bonding FRP panels to concrete, plaster, plywood, and gypsum wallboard. Nonflammable, fast-setting and water resistant. Provides a water-resistant bond between all types of tub and shower surrounds. No burn though, heat and steam resistant. Great for plastic, fiberglass and polystyrene tub and shower units. GREENGARD Gold Certified. Using a 1/4" bead covers 32 lineal feet. Formulated with non-regulated VOC to provide spray consistency when added to Majic Tractor & Implement Enamel or Majic Rust Kill Enamel without compromising the VOC limits.
Flood FLD4-01 Floetrol Paint Conditioner Dap 00273 Weldwood Contact Cement Dap 00443 Weldwood Carpet Adhesive
For oil and Alkyd paint. Enhances penetration and adhesion of oil-based paints and primers. Use to make interior painting projects flow more smoothly. Use with oil or alkyd paints. Reduces brush marks and leveling problems with the paint. Reduces fatigue and frustration with painting projects. Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon. Use to permanently install outdoor carpet and artificial turfs. Withstands rain, snow, ice and freezing.  Resists curling. Rubber-based, fast grab formula. Covers approximately 12-16 sq. yd. per gallon on smooth backed outdoor carpet using a 3/32" x 3/32" x 3/32" V-Notch. Covers approximately 6-10 sq. yd. per gallon on textured backed outdoor carpet and artificial using a 1/8" x 1/8" x 1/16" V-Notch.
Leech X30-79 X30 Contact Cement
High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline.
   
 
1