Home > PAINT & SUNDRIES > SUNDRIES > CONSTRUCTION ADHESIVES > ADHESIVES - MULTIPURPOSE
Sort By:
1
Hyde 46455 Paint Can Opener Encore Plastics 82114 Paint Paddle Trimaco 11101 Paint Strainer
Use to remove paint can lids without damaging seal. Loop style bottle opener. One piece plated steel construction. Alternative to wood stir stick. Holes provide better agitation. Quickly and easily stirs paint. Removes impurities in oil based and latex paints and varnishes. Strong, durable construction. Prevents spray gun clogging.
Hyde 46445 Paint Can Opener Trimaco 10501 Supertuff Tack Cloth Linzer 5425 Lid Opener With Header
Use to remove paint can lids without damaging seal. Loop style bottle opener. One piece plated steel construction. Removes dust, dirt, lint and sanding residue before and between coats when painting, staining, varnishing or auto repainting. Linzer Lid Opener, 5 gal Capacity, Plastic, Polyethylene
Liquid Nails LN-704 Liquid Nails Construction Adhesive 3M 10132 Single Ply Tack Cloth Foampro 60 Paint Can Grid
This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Covers 30 lineal feet using 1/4" bead. Removes dust, dirt, lint and other particles that settle on wood. Helps achieve super smooth surfaces. Single ply cloth, 612 square inches. Rental. For stirring and mixing paint. Eliminates messy pouring of paint. Apply paint directly from a 1-gallon can with rollers up to 4" wide. Snaps under paint can lip for storage and to make room for large diameter rollers. No paint tray needed. 4" x 10" x 1/4".
Linzer RM115 Bucket Grid Hyde 45110 Swivel Pail Hook Leech F26-32 Construction Adhesive
No paint tray needed. Ideal for stirring and mixing, for use with 2" and 4" mini rollers. Use to hang paint pails on ladder, windowsill, etc. Plated steel construction. Sharp pointed hook with swivel. Snap-lock catch to hold pail handle. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Trimaco 11522 Elastic Top Paint Strainer Mintcraft CW921 Paint Bucket Grids Linzer RM150 Paint Bucket Grids
Made of tight nylon mesh. Use to strain all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint. Two-sided wrapped galvanized frame 13" x 10". Fits one gallon cans. 4 sided. For buckets & paint trays. Size: 7-1/2" x 5-1/2" x 2-1/2".
Encore Plastics 82130 Ez Pour Paint Pail Spout Hyde 45050 Paint Pail Hook Franklin Titebond GREENchoice Construction Adhesive
Use to connect to a screw top or tint plug lid of any 5 gallon pail to make paint pouring easier and neater. Air tight cap. Used to hang paint pails on ladder. One piece plated steel construction. Plat ends can be used to open paint cans. Not recommended for 5 gallon pails. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
LID PAINT CAN QT W/SPOUT      ADHESIVE CONSTUCTION VOC10.3OZ Shur-Line 1783844 Pour And Store Paint Pail Lids
For use with water-based paints and stains. Flexible paint can lid with pour spout. Allows for storage and easy access. Snap on can. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. For use with water-based paints and stains. Flexible paint can lid with pour spout. Allows for storage and easy access. Snap on can.
Mintcraft CW941 Paint Bucket Grids Encore Plastics 82118 Touch-N-Trim Painter Acme FSS01 Faux Round Sea Sponge
All 4 sides wrapped galvanized frame 12" x 10". Use to wipe off excess paint from paintbrush with the brush bar in the upper part of the container. Has a convenient brush rest. It is solvent resistant and disposable. For use in decorating painting applications.
Wooster F0001 Paint Bucket Grids Snap Screen R008 Bucket Grid Linzer RM414 Paint Bucket Grids
Light-quality expanded steel wire bright galvanized finish. Reinforced edges on all sides. 10" wide x 11-1/2" long. Paint right from the can with all rollers 4-1/2" or smaller. Hooks secure the grid, provide best rolling angle; slot in top holds roller frame grip in place. Durable green polypropylene won't rust, resists solvents and paint buildup, easy to clean. Fits all 1 gallon metal paint cans, 9in. L x 5-1/4in.W. Fits 2 gallon cans. 4 sided. Heavy duty, for buckets and paint trays.
Hyde Tools 43460 Paint Mixers ADHESIVE CONST ALLPURP VOC 5OZ Trimaco 11523 Elastic Top Paint Strainer
For mixing in quart and gallon cans. Lifts and mixes solids from the bottom of paint cans. Rugged polypropylene with 7" hexagonal shaft for use with 3/8" drill. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Made of tight nylon mesh. Use to strain all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint.
WW Henry 440-004 Cove Base Adhesive Loctite 1589155 Power Grab Construction Adhesive Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive
Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead. Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up. For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead.
ADHESIVE CONST HVY-DUTY 10OZ  Franklin Titebond Construction Adhesive Liquid Nails LN-990 Liquid Nails Construction Adhesive
Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications. A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified. Covers 30 lineal feet using 1/4" bead.
Loctite 1589346 Power Grab Construction Adhesive ADHESIVE CONST HVY DUTY 10OZ  ADHESIVE CONST HVY DTY 5OZ
For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.
Acme BP-4050MD Faux Artist Sea Sponge Acme BP-4050CS Faux Artist Sea Sponge Acme BP-4050FN Faux Artist Sea Sponge
For sponge painting walls, furniture and other craft projects. For creating soft, marble pattern on walls, furniture and other craft projects. For creating a fine pattern on walls, furniture and other craft projects.
GRID PNT BCKT 10-1/2X10-1/2IN Loctite 1589157 Power Grab Construction Adhesive Hyde Tools 43510 Painter'S Pyramid
Durable green polypropylene won?t rust, resists solvents and paint buildup; open design for easy cleaning. Snap two together for large trays or buckets. Can be used for 8614 Wide Boy bucket (Orgill SKU# 663.6047). Also fits 8616 Wooster 4-Gallon Bucket (Orgill SKU# 150.0735) or common 5-gallon paint pails. 10 1/2? L x 10 1/2? W. Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white. Non-stick points have minimal contact, allowing you to paint one side, immediately flip the workpiece and complete the job without the drying time. Pyramids supports up to 200 pounds; chemically resistant. Great for cabinet doors, shutters, furniture, crafts, moldings and more.
Liquid Nails LN-950 Liquid Nails - Poly Construction Adhesive ADHESIVE CONSTRUCTION 2-1/2OZ Eclectic E6000 Craft Adhesive
A weather-resistant adhesive specially formulated to adhere to non-porous surfaces such as glass, ceramic, glass and vinyl. Covers 30 lineal feet using 1/4" bead. Ideal for small projects on all surfaces. Holds in 30 seconds, and bonds virtually anything including tub & tile, mirrors, flag brackets, wood, floating shelves, laminate repairs, brick and stone, water feature and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable.
COVER PAINT PLASTIC BRUSH     ADHESIVE CONSTRUCTION POLY 4OZ ADHESIVE HEAVY DUTY MAX 10OZ
Designed to fit most everyday paint brushes from 3? and below. Made from an airtight, durable plastic, which allows you to store paint covered brushes for hours, days, even weeks, without need for washup or for fear of your brush being ruined. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498.
Henry 430 ClearPro Thin Spread Floor Tile Adhesive ADHESIVE CONST ALLPURP VOC28OZ ADHESIVE CONST MULTI SURF 5OZ
Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Formulated for use as a fast-setting, high-performance adhesive that bonds almost everything. Cures by absorbing moisture from the surfaces to which it has been applied and by absorbing moisture from the air. Cures rapidly to an initial set within 4 to 6 hours. Has resistance to heat, cold, and weathering. Meets all air quality regulations.
Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive WW Henry FP00595005 Cove Base Adhesive WW Henry 440-005 Cove Base Adhesive
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. Installation of either rubber or vinyl cove base. Bonds rubber and vinyl cove base to concrete, gypsum drywall, plaster, wood, plywood, brick, plastic laminate, and abraded glazed or metal surfaces on all grade levels as recommend by the cove base manufacturer. Covers 90 lin. ft. per 30 oz. with 1/8" bead. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive Initial Grab. No open time required. Plasticizer Migration-Resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Covers 27 lin. ft. per 11 oz. cartridge and 90 lin. ft. per 30 oz. with 1/8" bead.
Encore Plastics 05185 Pro Paint Strainer WW Henry 440-034 Cove Base Adhesive COVER PAINT PLASTIC ROLLER
Fits into 5-gallon pail with heavy duty lip to prevent collapse. Great for straining roller nap hair, paint impurities, and contaminants. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon. Keeps rollers wet and ready between coats without washup for hours, days, even weeks, without fear of drying up. Design allows you to place the cover right over the roller handle. Fits any size roller up to 9-1/2?.
Franklin Titebond GREENchoice Construction Adhesive Liquid Nails LNP-704 Liquid Nails Construction Adhesive ADHESIVE CONSTRUCTION POWR 9OZ
For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Covers 30 lineal feet using 1/4" bead. Works in all conditions, all weather and on all materials. It can be applied in wet conditions as well as bond two non-porous surfaces. Can also be applied in a wide temperature range, from 40 to 140-degrees F. It is repositionable for 10 minutes and is GREENGUARD certified.
ADHESIVE CONST ALL SURFACE 9OZ Quikrete 9902-10 1-Part Construction Adhesive WHIP MIXER STIR 18IN
Formulated with a proprietary hybrid-polymer blend. Instant grab. Bonds in any weather condition, wet or dry surfaces. Certified by UL Environment to meet the GREENGUARD GOLD standard as a low emitting material. Use on all surfaces, porous or non-porous, wet or dry except on polyethylene and polypropylene. Comes with a detachable nozzle for easy cleaning for reuse. Using full round 1/4? bead, 9 oz covers 27 linear feet. For permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Use to bond retaining wall block and caps and repair broken concrete. Designed with a 3/8" steel hex shank and a nylon mixing head. Features flexible ?fingers? that reach into the corners of containers for more complete mixing. Maximum lift from the bottom of containers. Low drag for mixing thick materials with less power so it won?t kill your battery. Effective use with most viscous fluids. Flexes to fit through 5-gallon pour spout for use without opening the bucket.
SEALANT HEAVY DUTY PL 9.5OZ   Loctite 1417170 Pl - Fast Grab Construction Adhesive Franklin Titebond Construction Adhesive
Suitable for interior and exterior projects. It can bond and seal a variety of materials including wood, laminate, drywall, plaster, tile, ceramic, porcelain, concrete & masonry, marble, granite, brick, aluminum, stainless steel, metal, fiberglass, PVC and many more. 5X Stretch allows the product to stay permanently flexible, will not shrink or crack over time. Paintable in 30 minutes, fully cures in 24 hours. Weather resistant, will not wash out or discolor. Scrub and mildew resistant for long lasting professional finish in kitchen and bath projects. Has high initial tack making it ideal for securing vertical surfaces with less bracing required and is repositionable. 100-percent moisture curing polyurethane. May be used inside or outside. Water resistant. Low odor. Meets and exceeds APA AFG-01 and ASTM D3498 space. Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications.
Acme SW#1-5060C Seawool Sponge Loctite 1589199 Loctite - Power Grab Construction Adhesive GLUE PC-UNIVERSAL CLEAR 10.3OZ
For paint sundry use, faux finishing, general cleaning and bathing. Soft, pliable and absorbent. Instant grab technology eliminates the need for nails and screws in many DIY and repairs jobs. No bracing and no flashing off. Latex-based for easy water clean-up. Low-odor, paintable and will not dry out. Pressure pack eliminates the use of a caulking gun. Use on concrete, brick veneer, treated wood, plywood and drywall. AFG-01 approved. Flexible, non-foaming, high solids glue. Can be used for bonding, gluing and sealing all types of surfaces without expansion and foaming. Dries clear. Forms a flexible tenacious bond to most surfaces. May be diluted with clean water. 10 minute working time. 1700 psi bond strength.
ADHESIVE CONSTRUCTION 9OZ     HOLDER TOOL PLASTIC THREADED  Acme MP-4-4000 4-Piece Faux Artist Sea Sponge
For all surfaces. Holds in 30 seconds, and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foamboard, marble and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula. Securely holds a roller frame, paintbrush, scraper, flashlight, and more (maximum diameter 1-3/8? or 35mm). Locks in 9 positions, fully adjustable for virtually any angle, range of 160 degrees. Durable fiberglass-reinforced nylon and polypropylene construction. For use with threaded or Sherlock GT? extension poles. Contains a mixture of sponge textures and shapes for a variety of faux finishing and craft projects.
Franklin 3402 Titebond Cove Base Adhesive Franklin 4222 Fast Set Construction Adhesive Dap 25053 Weldwood Cove Base Adhesive
Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base. Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity. For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel.
Acme SW#1-6070C Seawool Sponge Henry 430 ClearPro Thin Spread Floor Tile Adhesive Acme SW #1-7080C Seawool Sponge
For paint sundry use, faux finishing, general cleaning and bathing. Soft, pliable and absorbent. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile. For paint sundry use, faux finishing, general cleaning and bathing. Soft, pliable and absorbent.
Henry 444 FRP Installer Grade Panel Adhesive Trimaco 11311/25 Paint Strainer SikaBond 409586 Construction Adhesive
For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon For straining all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint. Double stitched edges and are made of polyester. Waterprroof and water immersible. Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure.
Liquid Nails LN-700 Fast Bonding Construction Adhesive WW Henry 440-044 Cove Base Adhesive Whizz 57100 Paint Bucket Grids
A fast-bonding, permanent weather-resistant adhesive for most common materials. Works best on wood, metal and concrete. GREENGUARD GOLD certified. Water resistant. Used for the installation of rubber and vinyl cove base. Bonds to concrete, concrete block, gypsum drywall, plaster, wood, plywood, brick and plastic laminate, and abraded glazed or metal. Aggressive initial grab. No open time required. Plasticizer migration-resistant. Easy cleanup. Excellent trowelability. AGIS Guarantee. Application on 2 -2-1/2" rubber or vinyl cove base covers 310-340 lin. ft. per gallon.  Application on 4" rubber or vinyl cove base covers 220-240 lin. ft. per gallon.  Application on 6" rubber or vinyl cove base covers 165-180 lin. ft. per gallon. Fits in a gallon can. Converts gallon can into paint loading system. Compatible with all whizz 2" and 4" rollers. Plastic construction. Will not rust. May be sealed-in can. Easy to clean.
Gardner-Gibson 0525-GA Driveaseal Ii Blacktop Driveway Filler-Sealer Trimaco 11511/25 Elastic Top Paint Strainer Henry HE130074 Driveway Coating
Renews blacktop surfaces. Fills small cracks. This coal tar free economy filler sealer offers a 2 Year Warranty. Made of tight nylon mesh. Use to strain all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint. Renews blacktop driveways. Water-based product. Covers 200 to 500 sq. ft. per 4.75 gallon pail, depending on surface texture. 2 year warranty.
Trimaco 11313/25 Elastic Top Paint Strainer Allway SPH Swivel Pail Hook With Swivel OSI FRP555 Reinforced Panel Adhesive
For straining all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint. Double stitched edges and are made of polyester. Pointed ladder hook with swivel for paint can pail handle. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon.
Allway PH Pail Hook Henry HE175412 Driveway Filler And Sealer Gardner-Gibson 7545-GA Drive 5 Blacktop Driveway Filler-Sealer
Ladder hook for paint cans. 2 hooks per card. Renews blacktop driveways, fills and seals rough surfaces and minor cracks. Covers 250-500 sq. ft. per 5 gallon pail, depending on surface texture. 3 year warranty. Seals and protects any asphalt or blacktop surface. Restores driveways and parking lots to their original black finish and fills small cracks for a more even-looking appearance. Covers approximately 350 sq ft per 5 gallon pail in two thin coats. Coverage varies based on the surface condition and texture.
Dap 25054 Weldwood Cove Base Adhesive PAINT GRID FITS GALLON        ADHESIVE RESLBLE BOND PRSS GAL
For installing rubber and vinyl cove base. Resists cracking and drying out. Trowel grade. Provides good initial tack and easy spreading for rapid installation. Covers 50-60 sq. ft. per gallon depending on size of trowel. Fits directly into a gallon paint can, eliminating paint tray. Designed for use with quick pro rollers. Red. Formulated with releasable bonding pressure sensitive properties that firmly adhere throughout the service life of the floor, yet the flooring can be easily removed at any time without causing damage to the subfloor. Use for fiberglass-reinforced sheet vinyl flooring, solid vinyl tile (LVT), solid vinyl plank (LVP), vinyl-backed sheet flooring and vinyl-backed carpet tile. Ideal for reducing the remodel workload in rental units, condominiums or other spaces that undergo frequent replacement of floor coverings.  Moisture resistant up to 90% RH. Plasticizer migration resistant. Solvent free. Non-flammable.
Henry HE200411 Driveway Filler And Sealer Trimaco 11513 Elastic Top Paint Strainer Trimaco 11105 Paint Strainer
For use as a filler and sealer coat for blacktop pavements. Reinforced for improved traction and durability. 4x rubberized for longer life. Easy to stir and apply. Fills surface cracks up to 1/8 inch. Covers 250-500 sq. ft. per 5 gallon pail, depending on surface texture. 4 year warranty. Made of tight nylon mesh. Use to strain all types of paints, stains and liquids. Removes dried flakes, lumps, filaments and other dust particles from paint. Removes impurities in oil based and latex paints and varnishes. Strong, durable construction. Prevents spray gun clogging.
ADHESIVE VINYL FLOOR GAL      TRIPOD PAINTERS 10PK          Liquid Nails FRP-310 Fiberglass Rpp Adhesive
ADHESIVE VINYL FLOOR GAL
Our Price: $36.28
A premium, high strength adhesive for the permanent installation of vinyl-backed flooring. Generates high ultimate bond strength as both a wet-set and a pressure sensitive adhesive, plus delivers excellent initial grab and early bond strength for pressure sensitive installations. Its versatility and overall performance make it suitable for all formats and sizes of vinyl-backed flooring, including vinyl tile, plank and vinyl-backed sheet. Use to support items like doors and dowels to keep them off the ground while you?re painting. Paint the top of your project, turn over while still wet, and paint other side. No waiting to dry and no more paint lines on your floor. Interlock to support unweidly items, and they can be maneuvered into multiple positions depending on the shape of the item being painted. They can also be screwed down for additional security. Each pack includes 10 pieces. Strong-bonding, low odor, adhesive specifically formulated for bonding Fiberglass Reinforced Panels (FRP). Use to bond to cured concrete, wood, drywall, concrete backerboard, greenboard, foamboard, and non-reinforced panels. Meets or exceeds ASTM C-557 Specifications. One gallon covers 50 sq. ft.
Liquid Nails LN-903 Liquid Nails Construction Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive Liquid Nails CB-10 Liquid Nails Cove Base Adhesive
Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. A water-resistant, latex-based construction adhesive with quick initial grab. Formulated to bond vinyl or rubber cover base and stair treads. No bracing required and easy water clean up. Covers 30 lin. ft. per 10 oz. cartridge.
Leech F13-36 Construction Adhesive Franklin 3401 Professional Cove Base Adhesive Liquid Nails LN-601 Liquid Nails Construction Adhesive
High quality construction adhesive that bonds paneling, foamboard, plywood and drywall. Good strength; will not become brittle or hard with age. Passes ASTM C-557 and D572-73 specifications. Designed for the installation of rubber and vinyl cove bases and acoustical tiles. Fast grab, excellent adhesion. Adheres to most common wall surfaces like drywall, plaster, paint, wallpaper, paneling and ceramic tile. Safe to use, no harmful fumes. Water cleanup. Covers approximately 15-25 linear feet when used with 4" cove base. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time.
Franklin 3451 Titebond Construction Adhesive CAN CLIPS BUCKET              WW Henry FP00317069 Construction Adhesive
For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. Use to rest your brush on the side of one-gallon paint cans. Attaches securely to the can?s lip, and strong magnets hold your brush in place. Provides a convenient, metal can opener on the opposite side of the tool to get your job started quickly. Packed in a high-visibilty clear plastic bucket. Installation of commercial and residential construction projects. Bonds wood wall paneling, FRP panels, predecorated wallboard, plywood, particleboard or hardboard, gypsum drywall, polystyrene or urethane foam insulation, furring strips.
Henry 430 ClearPro Thin Spread Floor Tile Adhesive Foampro 61 Fits-All Paint Pail Spout Leech F26-33-12 Construction Adhesive
Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile. One size fits pint, quart, gallon and 4-liter paint cans. Snaps onto inner rim of paint can to keep paint out of the gutter and ensure a good seal after use. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive.
Henry PR690070 Topkote Driveway Sealer Liquid Nails LNP-903 Liquid Nails Construction Adhesive Loctite 1390595 Pl Construction Adhesive
Smooths, preserves and protects weathered asphalt driveways. Use only on unsealed blacktop at least one year old. Should not be applied to surfaces previously sealed with coal tar, latex or acrylic driveway sealer. On weathered and patched surfaces, covers 60-80 sq. ft. per gallon. Coverage may vary according to surface age and porosity, climate conditions when applying and method of application. Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds requirements of ASTM C-557. GREENGUARD Gold Certified. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft.
Liquid Nails LN-903 Versatile Construction Adhesive Henry 444 FRP Installer Grade Panel Adhesive Franklin 4221 Fast Set Construction Adhesive
Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds requirements of ASTM C-557. GREENGUARD Gold Certified. For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity.
Henkel 827628 Pro-Series Qb-300 Construction Adhesive Liquid Nails LN-901 Liquid Nails Construction Adhesive Loctite 1390602 Pl200 Professional Line Construction Adhesive
For bonding all types of paneling to structurally sound surfaces. Installs vinyl covered gypsum panels and all types of foam panel boards. Bonds foam to block or concrete walls and ceilings. Adheres cork, marble, polystyrene bath panels. Waterproof, fast grab, sets up quickly. Using a 10.5 oz. cartridge covers approximately 32 lin. ft. with a 1/4" bead and 14 lin. ft. with a 3/8" bead. Using a 29 oz. cartridge covers approximately 89 lin. ft. with a 1/4" bead and 40 lin. ft. with a 3/8" bead. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557. Water resistant. For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft.
Dap 25082 Beats The Nail Construction Adhesive Liquid Nails LNP-601 High Quality Construction Adhesive Liquid Nails LNP-901 Liquid Nails Construction Adhesive
For general construction, remodeling, maintenance and repair projects. Quick-grab formula provides a high-strength, heat and water resistant bond to a variety of substrates. Meets ASTM C-557 Specifications. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557. Water resistant.
Sika 106403 Sikabond Construction Adhesive ADHESIVE RESLBLE BOND PRESS 4G Loctite 1390594 Pl Construction Adhesive
Waterprroof and water immersible. Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure. Formulated with releasable bonding pressure sensitive properties that firmly adhere throughout the service life of the floor, yet the flooring can be easily removed at any time without causing damage to the subfloor. Use for fiberglass-reinforced sheet vinyl flooring, solid vinyl tile (LVT), solid vinyl plank (LVP), vinyl-backed sheet flooring and vinyl-backed carpet tile. Ideal for reducing the remodel workload in rental units, condominiums or other spaces that undergo frequent replacement of floor coverings.  Moisture resistant up to 90% RH. Plasticizer migration resistant. Solvent free. Non-flammable. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft.
OSI FRP555 Reinforced Panel Adhesive ADHESIVE CONST HVY DUTY 28OZ  ADHESIVE VINYL FLOOR 4GAL
ADHESIVE VINYL FLOOR 4GAL
Our Price: $102.96
High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. A premium, high strength adhesive for the permanent installation of vinyl-backed flooring. Generates high ultimate bond strength as both a wet-set and a pressure sensitive adhesive, plus delivers excellent initial grab and early bond strength for pressure sensitive installations. Its versatility and overall performance make it suitable for all formats and sizes of vinyl-backed flooring, including vinyl tile, plank and vinyl-backed sheet.
DAP Weldwood Fiberglass Reinforced Panel Adhesive Leech F26-34 Construction Adhesive Dap 25488 Beats The Nail Construction Adhesive
For bonding FRP panels to concrete, plaster, plywood, and gypsum wallboard. Nonflammable, fast-setting and water resistant. Fills gaps to bridge irregularities and voids in projects. Used for subflooring, paneling, plywood, bathroom fixtures, insulation, furring strips, electric outlet boxes, chip and wall board, marble sills, moldings, trims, signs, name plates, brick, stone, etc. Designed for a wide range of construction and remolding applications. Excellent aging characteristics. Easy to apply. Remains flexible. Good impact characteristics.  Waterproof, general purpose mastic. Exceeds HUD-FHA and APA requirements under specifications AFG-01 and FHA bulletin UM-60 and ASTM C 557. Covers approximately 275-325 sq. ft of plywood floor installations per gallon of adhesive. For construction, remodeling, maintenance and repair projects. May be used for bonding bath panel, tub enclosures and other types of wall panels to drywall, hardboard, plywood, plaster, masonry and other structurally sound surfaces. Use to repair loose ceramic tiles, sink tops, backsplashes and moulding. For installing Fiberglass Reinforced Panels. Professional-grade formula. Provides water and moisture-proof barrier between wall and panel. High strength and permanent bond. One gallon covers 40-60 sq. ft. depending upon surface irregularity.
Franklin 3452 Titebond Construction Adhesive Hyde 47050 Paint Paddle Hyde 47011 Paint Paddle
For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. For stirring and mixing. Inexpensive and disposable. For stirring and mixing. Inexpensive and disposable.
   
 
1