Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > THREADLOCKING COMPOUNDS
Sort By:
1
Stanley Tools GS15DT Dualmelt Glue Sticks Foampro 60 Paint Can Grid Arrow AP5 Glue Sticks
Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. For stirring and mixing paint. Eliminates messy pouring of paint. Apply paint directly from a 1-gallon can with rollers up to 4" wide. Snaps under paint can lip for storage and to make room for large diameter rollers. No paint tray needed. 4" x 10" x 1/4". For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns.
Linzer RM115 Bucket Grid Stanley Tools GS230S Glue Sticks Franklin Titebond Original Wood Glue
No paint tray needed. Ideal for stirring and mixing, for use with 2" and 4" mini rollers. Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues. Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236.
Elemer's E7000 Wood Glue GLUE STCK ALL PURPOSE 5/16X4IN Mintcraft CW921 Paint Bucket Grids
For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. All purpose use for models, wood crafts, wreaths, canvas, leather, cardboard, etc. For use with all glue guns. Two-sided wrapped galvanized frame 13" x 10".
Linzer RM150 Paint Bucket Grids Franklin Titebond II Weatherproof Wood Glue Versa Chem S-243 Medium Strength Threadlocker
Fits one gallon cans. 4 sided. For buckets & paint trays. Size: 7-1/2" x 5-1/2" x 2-1/2". Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards). Cures between engaged threads to resist leakage, shock and vibration. Formulated for bonding similar and dissimilar materials. For applications requiring keeping nuts and bolts from loosening, yet allowing removal when needed. Non-shrinking formula, will not crack. Temperature and chemical resistant. Sets in 1 hour. 1,600 psi bond strength. Remove with ordinary tools.
Arrow MG12 Glue Sticks Arrow SS6 Super Power Glue Sticks GLUE WOOD GORILLA 4OZ
For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds. Allows more time for lineup of larger areas. For wood, fabrics, leather, metal, plastics, etc. Sets in 90 to 120 seconds. 4" sticks break to 2" for thumb feed models. Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II.
ITW Permatex 24206 Threadlockers Mintcraft CW941 Paint Bucket Grids Elmers E7010 Pourable Interior Carpenters Wood Glue
Use for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs. For all 1/4" to 3/4" diameter nut and bolt assemblies. Locks and seals while preventing parts loosening due to vibration. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resists light oils and chemicals and dripping from threads during assembly. -65 to 300 degrees Fahrenheit temperature resistance range. All 4 sides wrapped galvanized frame 12" x 10". For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic.
Franklin Titebond Original Wood Glue Stanley Tools GS500 Glue Sticks Wooster F0001 Paint Bucket Grids
Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Makes fast permanent bonds. Glue, caulk, and set time 25 to 60 seconds. No shelf life limit like tube and bottle glues. Light-quality expanded steel wire bright galvanized finish. Reinforced edges on all sides. 10" wide x 11-1/2" long.
Snap Screen R008 Bucket Grid Linzer RM414 Paint Bucket Grids Henkel Quick Set Epoxy Resin
Paint right from the can with all rollers 4-1/2" or smaller. Hooks secure the grid, provide best rolling angle; slot in top holds roller frame grip in place. Durable green polypropylene won't rust, resists solvents and paint buildup, easy to clean. Fits all 1 gallon metal paint cans, 9in. L x 5-1/4in.W. Fits 2 gallon cans. 4 sided. Heavy duty, for buckets and paint trays. Two-part adhesive consisting of an epoxy resin and a hardener. Bonds in 5 minutes. Dual syringe delivers equal parts. For a wide range of materials or a s a versatile filler for gap filling, surface repairs and laminating. Can be sanded and drilled. 3,200 psi.
Loctite Mastermind Epoxy Resin ITW Permatex 84107 Permapoxy Epoxy Devcon S208 Epoxy Anchoring Adhesive
For complex multi-piece assemblies. For a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Does not shrink. Can be tinted with earth pigments, cement or sand for color matching. Can be sanded and drilled. Two-part system consisting of an epoxy resin and a hardener in a dual syringe. High Strength bond. Sets in 60 minutes. 3,000 psi. Versatile, easy-to-use, multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Sets in 30 minutes. Permanent strength up to 3,500 psi. Clear. The syringe gives correct amounts of resin and hardener automatically. No measuring required. Includes snap-off-snap-on cap and handy mixing paddle. Works on metal, wood, chrome, glass, concrete, fiberglass, tiles, ceramic, china and more. Sandable and paintable. Starts setting in 5 minutes. 1,500 psi bond strength.
2 Ton S35 Medium-Cure Epoxy Adhesive GLUE SCREW LOCKING 6MIL       Devcon S-5 VersaChem Plastic Steel Epoxy
GLUE SCREW LOCKING 6MIL
Our Price: $3.89
Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Non-shrinking. Sandable and paintable. Designed to lock screws, nuts, and bolts in place. This product is a single component, anaerobic liquid that cures when confined in the absence of air between close fitting metal surfaces, ideal for all 6mm to 25mm (1/4 inch to 1 inch) diameter threaded assemblies. Excels at sealing metal-to-metal threads for both interior and exterior applications, due to chemical and temperature resistance. The cured assembly is easily adjustable or removable with hand tools. Forms lasting bond that resists heat, vibration, and chemicals. Seals metal threads to prevent rust and leaks. Increases holding power of screws, nuts, and bolts. Cures without cracking or shrinking. Adjusts or disassembles with hand tools. Fast curing and high strength epoxy. When fully cured, can be drilled, threaded, tapped or filled. Contains a steel alloy that does not rust.  Use it on all metals including steel, stainless steel, aluminum, brass, iron and pewter. Non-flammable.
Franklin 5012 Titebond Wood Glue GLUE WOOD GORILLA 8OZ         Flow-Mix 21445 Epoxy
Ready to use, no heating or mixing required. Long assembly time, exceptional strength and unique crackling effect on wood. Provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments. Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II. For application requiring fast curing and instant adhesion. Non-shrinking. Fills gaps. Flow-Mix applicator allows for self-mixing. Sandable and paintable. Works on glass, metal, fiberglass and ceramics. Starts setting in 60 seconds. 1,200 psi bond strength.
Franklin Titebond III Ultimate Wood Glue ITW Permatex 84101 Permapoxy Epoxy Titebond 6123 Polyvinyl Acetate Emulsion Translucent Wood Glue
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. 3,400 psi. 5 minute set time. For general household and woodworking projects. Provides a invisible glue line and bonds stronger than the wood. Strong tack and fast speed of set helps reduce clamp time. Unaffected by finishes and sands easily. Non-toxic and cleans up with water. Conforms to ASTM D-4236.
Stanley Tools GR10 Glue Guns Stanley Tools GS10DT Dualmelt Glue Sticks Mintcraft JL-GG-103L Glue Guns
Ideal for craft and hobby applications. Small, portable size for quick gluing jobs in tight spaces. Uses mini hot melt or dual temperature glue sticks. Built-in stand. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Ideal for hobby and craft applications and quick glue jobs in tight places. 10W.
Franklin Titebond Original Wood Glue ITW Permatex 84115 Permapoxy Epoxy 3M 18094 Quick Set Epoxy
Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Use to repair metal, china, glass and plastics. Sets up in 5 minutes. Dries clear.
Quikrete 1103-10 Sand/Topping Mix 5 Minute S205 Fast-Curing Thixotropic Epoxy Adhesive Franklin Titebond II Weatherproof Wood Glue
Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Works on metal, wood, chrome, tile, glass, fiberglass, concrete, ceramic, china and more. Sandable and paintable. 1,500 psi bond strength. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards).
Loctite 1360788 Epoxy Plastic Bonder 2 Ton S31 Medium-Cure Epoxy Adhesive Elmer's E7290 Wood Glue Max Carpenter's Wood Glue
Formulated to bond and repair plastic surfaces. Double syringe dispenses equal amounts of each component. Components react to produce a tough, rigid, high strength bond in 20 to 25 min. Does not shrink and is resistant to water, most common solvents and shop fluids. High impact resistance. Can be sanded and drilled. Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Dries clear. Non-shrinking. Resealable tip. Sandable and paintable. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic.
Franklin Titebond No-Run No-Drip Wood Glue Titebond 3703 Cross-Linking Polyvinyl Acetate Dark Wood Glue Plastic Steel S-6 2-Part Metal Repair Epoxy
For wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Extra-thick formula helps fill small cracks and gaps. Provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. Sandable. Unaffected by finishes. Dries clear. For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water. Fast curing and high strength epoxy.  When fully cured, can be drilled, threaded, tapped or filled.  Easy flow syringe with a Snap-On cap that allows for storage and reuse. Use it on all metals including steel, stainless steel, aluminum, brass, copper, iron and pewter. Fills gaps and hardens to a metallic mass. Non-flammable.
Devcon S220 Impact Resistant Water Resistant Plastic Welder GRID PNT BCKT 10-1/2X10-1/2IN ITW 5 Minute Flow-Mix Automix Epoxy
Bonds similar and dissimilar materials. Use on unprepared metals, ceramics, wood, concrete and hard plastics. Minimal surface preparation required. Resistant to weathering, humidity and wide temperature variations. Bonding strength 3,500 psi. Durable green polypropylene won?t rust, resists solvents and paint buildup; open design for easy cleaning. Snap two together for large trays or buckets. Can be used for 8614 Wide Boy bucket (Orgill SKU# 663.6047). Also fits 8616 Wooster 4-Gallon Bucket (Orgill SKU# 150.0735) or common 5-gallon paint pails. 10 1/2? L x 10 1/2? W. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Flow-Mix nozzle allows for self-mixing and no mess. Works on metal, wood, concrete, chrome, fiberglass, tiles, ceramic, glass, china and more. Bond strength 1,500 psi. Starts setting in 5 minutes.
FPC BS-12 Best Stik Glue Sticks Protective Coating PC-11 Marine? Epoxy Stanley Tools GS20DT Dualmelt Glue Sticks
For everyday gluing projects. Use with high or low temperature glue guns. Bonds to metal, wood, paper, fabric, magnets, ceramics, floral arrangements, glass and plastic using a high temperature glue gun. Bonds to delicate materials such as ribbon, lace and children's crafts using a low temperature glue gun. Use to make wet surface and underwater repairs. Boat, water and stock tanks, spas,  tubs, plumbing and porcelain. Cures: wet, dry and underwater. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds.
Loctite Instant Mix Epoxy Resin Arrow MT300 Mt300 Glue Guns 5 Minute S210 Fast-Curing Thixotropic Epoxy Adhesive
Can be as an adhesive for a wide range of materials or as a filler for gap bonding, surface repairs and laminating. Does not shrink. Resistant to water and most common solvents. Can be tinted with earth pigments, cement or sand. Can be sanded and drilled. 3200 psi bond. 5 min setting time. Reaches handling strength in a hour. Compact, easy to use. Solid state electronics. Perfect for hobbies, quick repairs, artificial flower arrangements, decorations, toys, models, arts and crafts. Includes stand and 3 sticks of all purpose glue. U.L. Listed. Rapid-curing general purpose. Will not drip or sag. For vertical or overhead applications. Use on metal, wood, chrome, concrete, glass, ceramics, fiberglass, china, tiles and more. Sandable and paintable. Fills gaps. Bonding strength 2,500 psi.
Elmers E7300 Max Pourable Stainable Carpenters Wood Glue Perma-Lock 24206 Thread Locking Compound Perma-Lock 27106 Thread Locking Compound
Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic. Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved.
GLUE ORIGINAL GORILLA 2OZ     GLUE GORILLA MINI TUBE        Arrow MG24-4 Glue Sticks
Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours. Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours. For arts and crafts, hobbies and general repairs. For woodworking, ceramics, leather, canvas, fabrics, cardboard, plastics, metal, etc. Sets in 30 to 60 seconds.
Loctite Mastermind Epoxy Metal/Concrete Resin J-B Weld 8276 Jb Kwik Weld Cold Weld Compound Devcon 21245 Water Resistant Epoxy Anchoring Adhesive
For repairing, filling and rebuilding all metals and concrete surfaces. High strength bond in 5 to 12 minutes. Does not shrink is resistant to water and most common solvents. Cured epoxies can be drilled, tapped, threaded or filed. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. Use equal portions from the black and orange tubes. Mix thoroughly. Pliable for about 2 minutes after mixing. Sets in 4 minutes and cures fully in 4 hours. Water-proof, petroleum-, chemical-, and acid-resistant. Resists shock, vibration and extreme temperature fluctuations and withstands temperatures up to 300 degrees-Fahrenheit. Non-toxic. Bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper just about any porous and non-porous material. Can be clean up with soap and water before it sets. For applications requiring fast curing and instant adhesion. Also use to fill gaps. Works on metal, glass, fiberglass and ceramic. Sandable and paintable. Starts to set in 60 seconds. Super-fast, general purpose. 1,250 PSI strength.
J-b Weld PlasticWeld Quick Setting Epoxy Adhesive 2-Ton Epoxy Flow-Mix VersaChem Epoxy Syringe ADHESIVE WOOD .85OZ
Bonds a variety of surfaces which include ABS & PVC plastics, fiberglass, metals and more. Sets in 5 min and cures in 1 hour. 3200 PSI. Dries off white. Formulated for high clarity, good impact and high strength. Use on metal, wood, concrete, glass, ceramics, china, fiberglass and chrome. Dries clear. Application allows for self-mixing and no mess. 2,500 psi. 30 minute working time. Non-shrinking. Sandable and paintable. Creates a professional-strength bond that works on all wood types. Sets in 30 seconds and is ready to plane, sand, or stain in just 30 minutes, minimizing clamping time. Repositionable for up to three minutes. Bonds to other surfaces, like ABS, melamine, particle board, rubber, steel, PVC, glass, stone, and more. Fine-Tip Applicator. No Activator Needed.
Devcon 44029 Epoxy Putty EPOXY GLUE GORILLA 0.85OZ     PC-Clear 70147 Fast Curing Medium Viscosity Epoxy Adhesive
Permanently repairs leaks, holes, cracks in metal, fiberglass, concrete and more. When fully cured, it can be drilled, filed, sanded and painted. Works on metals, copper, brass, steel, aluminum, iron, concrete and wood. Chemical resistant. Solvent and water resistance. Strong and durable for household and automotive repairs alike. Two-part, gap-filling formula easily bonds steel, aluminum, wood, ceramic, tile and most plastics. Dries crystal-clear in 24 hours. Clamp Time: 30 Minutes. Open Time: 5 Minutes. 3300 PSI bond strength. Includes resealable cap, stir stick and mixing tray. Medium viscosity liquid epoxy system with greater clarity than other epoxies. Can be used for repairs and projects. Fast curing, but allows ample time to apply and position the repair, 4 minute work time and total cure is 1 hour. Not brittle when cured, forms a tough and resilient bond. 2,300 psi tensile shear strength.
J-B Weld 8277 Epoxy Adhesive Elmers E7020 Pourable Interior Carpenters Wood Glue J-B Weld 8265S Jb Weld Cold Weld Compound
Use Waterweld as an adhesive, laminate, plug, filler, sealant, electrical insulator, and to patch holes and cracks. It can be formed, drilled, ground, sawn, tapped, machined, filled, sanded, painted and applied under water. Stays pliable for about 2 minutes after mixing, sets in just 20 minutes, and cures fully in just a few hours. Waterproof and withstands temperatures up to 300 degrees Fahrenheit. Approved by the national sanitation foundation. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains hardening compound.
SYRINGE WELD STEEL 25ML       ADHESIVE MULTI-MATERIAL 5G    Dap 00490 Weldwood Carpenter's Wood Glue
Two-part, high strength, cold welding adhesive and filler system that eliminates the need for welding or brazing. Can be used to bond many types of metals. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60-degree F to 300-degree F. Permanent strength up to 4500 PSI. Designed to lock screws, nuts, and bolts in place. This product is a single component, moisture-curing liquid that forms an ideal bond for all 6mm to 25mm (1/4 inch to 1 inch) diameter threaded assemblies. Bonds dissimilar materials such as metal, wood, and most plastics. Forms lasting bond that resists heat, vibration, and chemicals. Seals threads to resist rust and leaks. Increases holding power of screws, nuts, and bolts. Cures without cracking or shrinking. Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC.
J-b Weld PlasticWeld KwikPlastic Epoxy Putty Stanley Tools GS25DT Dualmelt Glue Sticks PC-Super 16619 Epoxy Putty
Repairs and rebuilds anything made of ABS, PVC and CPVC. Bonds instantly. Does not shrink or pull away. Sets in 20-25 minutes. Can be sanded, drilled, painted or sawed in 2-3 hours. Used in all purpose applications, high/low temperature glue guns. In high temperature glue guns the sticks are used for household repairs, carton sealing, hobby projects and much more. In low temperature glue guns for bonding heat sensitive materials such as ribbon, Styrofoam, dried flowers and bead work. Set time 25 to 30 seconds. Use for bonding, sealing and as a filler for most materials including fiberglass, wood, concrete, metal, brick, glass, block, ceramics, hard plastics and more. Can be applied to both vertical and overhead surfaces without drip or sag. 15 minutes max working time at 70 degrees Fahrenheit. 45 minutes tack free, 3 to 4 hours for service, 3 to 7 days for max cure. Chemical resistance to most chemicals, salt water, gasoline and fuel oil. Non-conductive, -20 to 200 degrees Fahrenheit temperature range, 2,650 psi tensile shear strength. 78 hardness shore D after 1 week of curing.
GLUE WOOD GORILLA 18OZ        J-b Weld 8272 2-Part Marineweld Epoxy J-b Weld ClearWeld Quick Setting Epoxy Syringe
Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II. Blocks saltwater, chemicals, oil, acids and other corrosive materials. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. For maintaining and repairing a wide variety of boating and marine products. Tolerates extreme temperature fluctuations. Includes two tubes, a 1 oz liquid steel/epoxy resin and a 1 oz hardener. Multi-purpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. Designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. 1:1 mixing ratio. Sets in 5 min and will fully cure overnight. Tensile strength of 3200 PSI. Sets to a hard, permanent bond.
J-b Weld Woodweld Quick Setting Wood Epoxy Adhesive PC-Fast-N EZ 61411 2-Part Epoxy Adhesive Loctite Mastermind Epoxy Putty
Use to repair anything made of wood. Sets in 6-8 minutes. No clamping necessary. Cures and paintable in one hour. 2-part. Can be drilled and tapped. Natural light wood color. (2) 1 oz tubes. Use as a general purpose adhesive to bond wood, metal, fiberglass, ceramics, glass and many hard plastics. Forms a water-resistant bond and is tough enough to be drilled, tapped, filled or sanded after final cure. Low-odor. 2-component. Cures rapidly at room temperature with exceptional tensile adhesion and peel strength to a wide variety of substrates. Forms a tough bond without the need for clamping. Flexible. 1,700 psi tensile shear strength. Suitable for use on plumbing, tubs & showers, pipes, potable water tanks, fiberglass, marine & pool, ceramic, PVC, aluminum, wood, brick, metal, concrete, rigid and semi-flexible plastic. It bonds metal, wood, ceramic, brick, most plastics and concrete. Can be sanded, drilled, tapped and painted. Produces a hard, tough, permanent and waterproof bond on a wide range of materials.
Franklin Titebond III Ultimate Wood Glue Protective PC-11 2OZ. Pc-11 Epoxy Paste Franklin Titebond II Weatherproof Wood Glue
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards).
J-b Weld KwikWeld Quick Setting Epoxy Syringe J-B Weld 8267S J-B Steelstik Adhesive/Sealant Franklin Titebond Hide Glue
Fast setting version of the Original J-B Weld. Provides repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. 1:1 mixing ratio. Sets in 6 minutes. Fully cured in 4-6 hours. Cures to a dark grey color. 2424 PSI tensile strength. Withstand temperatures up to 300-degrees F. Hand kneadable, steel-reinforced epoxy putty. Plug holes and make permanent repairs on wet and dry surfaces. Can be drilled, sanded, filed, tapped, machined, and painted. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Cures in 20 - 30 minutes. Ready to use, no heating or mixing required. Long assembly time, exceptional strength and unique crackling effect on wood. Provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments.
Franklin 2404 Titebond Wood Glue PC-Metal 25550 Hand Moldable Epoxy Putty PC-Crete 25581 Hand Moldable Epoxy Putty
For finish trim, crown molding, baseboards, window casings and other applications requiring a professional strength. No-run, no-drip wood glue. Extra-thick formula helps fill small cracks and gaps. Provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. Sandable. Unaffected by finishes. Dries translucent. For emergency automotive and plumbing repairs of gas tanks, radiators, holes or dents. Use on drums, steel doors, tanks, pipes, wherever metal is missing, dented or broken. Hand mixed with 3 minute working time. Cures in 30-60 minutes. May be sanded, drilled, sawed and painted after set. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 900 psi tensile shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. For emergency repairs to masonry and concrete surfaces including concrete steps, brick, mortar, stucco, curbs, pipes; conduit holes, nail and screw damage to walls and floors; and for stripped anchor bolts. Also for places where concrete has been broken or missing such as lawn ornaments or statues. Hand mixed, 2 to 3 minute working time. Cures in 30 to 60 minutes. Looks and feels like concrete. Nonconductive with -20 to 300 degrees Fahrenheit temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 650 psi tensil shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, airtight plastic cylinder.
PC-Lumber 25574 Moldable Epoxy Putty PC-Marine 25567 Hand Moldable Epoxy Putty EPOXY STEEL BOND HD 2PC 1OZ
For emergency repairs in wood; fill nail and screw holes, gouges; and replace rotted and worn wood. Replace and reshape wood parts, restore ornate wood pieces and carvings; repair damaged furniture, moldings, doors, frames, and wood floors. Hand mixed with 15 minute working time. Cures in 60 minutes. May be sanded, stained or painted. Wood color blends with light colored wood. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 500 psi tensil/shear strength. Packed in resealable, airtight plastic cylinder. For emergency repairs in salt or fresh water, for improved resistance to moisture. Suited for repairs to boats, water and stock tanks, fish boxes, spas and tubs, downspouts and gutters. Cures wet, dry or in water in pools, fiberglass and bath fixtures. Hand mixed with 15-20 minute working time. Cures in 60 minutes. May be shaped, drilled, sanded, sawed, filed and painted. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 700 psi tensil shear strength. 75 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. Bonds metal, concrete, PVC, fiberglass and more. 4250 PSI bond strength. 10 min set time. Waterproof. Cures dark grey. 2-part.
PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive GLUE ORIGINAL GORILLA 4OZ     EPOXY CLEAR 25ML SYRINGE W/CAP
Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes. Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours. High-strength, two-part instant setting epoxy. Set under most temperature conditions in one minute. Designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal. Strength of 2850 PSI. 1 Minute set time. Cures clear in one hour.
Protective 027776 Pc-7 Epoxy Paste PC-Woody PC-WOODY 1.5OZ Wood Filler Epoxy Adhesive GLUE GUN TRIGGER FEED MINI 40W
Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; use as a sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minutes tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chemicals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing. Bonds almost anything permanently in 60 seconds without the need of mixing or clamping. Ideal for repairs, hobbies or clamping. 40 W.
ITW Permatex 24005 Thread Locking Compound ITW Permatex 27005 Thread Locking Compound Franklin Titebond Original Wood Glue
All purpose medium strength thread locker, will not run or drip. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion, removable with hand tools for easy disassembly. High strength thread locker for heavy-duty applications, will not run or drip. Well-suited for permanently locking studs and press fits. 3,000 psi holding on slip and press fit assemblies. May require heat or special tools for removal. Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236.
Loctite 209741 Threadlocker Arrow AP10-4 Glue Sticks Titebond 3704 Cross-Linking Polyvinyl Acetate Dark Wood Glue
Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces. Protects threads from rust and corrosion and prevents loosening from shock and vibration. Removable once cured by heating up parts to 500-degrees Fahrenheit. Use on metal fasteners up to 1" dia. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For Arrow Trigger-Feed glue guns and other popular Trigger-Feed guns. For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water.
Permatex 27100 Threadlocker Arrow BAP5-4 Glue Sticks Elmers E7310 Max Pourable Carpenters Wood Glue
Use for cylinder block and rocker arm studs, ring gear bolts, frame bolts and shock absorber bolts. For all 1/4" to 3/4" diameter nut and bolt assemblies where future disassembly is improbable. For permanently locking studs and press fits; adds 3000 psi on slip and press fit assemblies; replaces set screws and snap rings. Locks against vibration loosening. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Requires extra effort or special tools for removal. Resistant to chemicals. -65 to 300 degrees Fahrenheit temperature resistance range. Heavy duty. For crafts, hobbies and general repairs. For woodworking, canvas, cardboard, ceramics, fabrics, leather, metal, plastics, etc. Press surfaces together within 15 seconds. Sets in 30 to 60 seconds. 4" sticks break to 2" for thumb feed models. For use in all 1/2" Arrow glue guns and other standard size glue guns. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic.
Permatex 24200 Medium Strength Threadlocker Glue-All Max E9406 Extra Strength All Purpose Adhesive EPOXY MARINE 25ML SYRNGE W/CAP
Use for valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts and carburetor studs. For all 1/4" to 3/4" diameter nut and bolt assemblies. Locks and seals while preventing parts loosening due to vibration. Resists virtually all leakage, shock and vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resists light oils and chemicals and dripping from threads during assembly. -65 to 300 degrees Fahrenheit temperature resistance range. Bonds metal, stone, wood and more. Waterproof, sandable and paintable. Low foaming and less mess. Two part Cold-Weld adhesive system that provides repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. Sets in 20 minutes at room temperature. At full cure, its color is white. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters? surface. 1:1 mixing ratio and tensile strength of 3200 PSI.
Franklin 6311 Titebond Wood Adhesive Activator Stanley Tools GR20 Glueshot Glue Guns H2 Hold VersaChem Flexible Underwater Epoxy Syringe
Accelerates the curing of all Titebond Instant Bond Adhesives. Effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. heptane-based solvent that will not mar finishes or damage plastics. 3 cps viscosity. Quality performance for reliable performance. Heats up quickly and bonds within 60 seconds. Uses standard high or dual temperature glue sticks. Flexible, tough and non-corrosive. Sticks and cures under water. Use on PVC, fiberglass, wood, metal, acrylic, fabrics, ceramics, masonry and more. Can be applied to wet or dry surfaces. 1800 psi super high strength. Sandable and paintable.
Franklin Titebond III Ultimate Wood Glue Glue-All Max E9415 Polyurethane Glue Emer's Advanced E7502 Multi-Surface Polyurethane Glue
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Bonds metal, stone, wood and more. Waterproof, sandable and paintable. Low foaming and less mess. Bonds metal, glass, ceramics, stone, wood, concrete and more. Strength of polyurethane glues with no foaming. Goes on translucent. Dries clear. Sandable and paintable. Weatherproof. Water clean-up. Paintable.
ADHESIVE WOOD 4OZ             Dap 00491 Weldwood Carpenter's Wood Glue Elmers E7040 Pourable Interior Carpenters Wood Glue
Creates a professional-strength bond that works on all wood types. Sets in 30 seconds and is ready to plane, sand, or stain in just 30 minutes, minimizing clamping time. Repositionable for up to three minutes. Bonds to other surfaces, like ABS, melamine, particle board, rubber, steel, PVC, glass, stone, and more. Fine-Tip Applicator. No Activator Needed. Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic.
Franklin Titebond Solvent Free Polyurethane Wood Glue Arrow TR400 Electro-Matic Glue Guns Dap 00203 Weldwood Wood Glue
Bonds virtually everything. Epoxy like strength, no mixing. Short clamp and fast cure. Sandable. Easily spread with a roller, spreader, or brush. Dried film yellow. Cleanup mineral spirits while glue is wet. Scrape or sand off dried excess. Honey color. Bonds almost anything permanently in 60 seconds without the need of mixing or clamping. Ideal for repairs, hobbies, arts and crafts and much more. Check valve controls glue flow. Built-in safety stand. Contoured design for perfect balance. High-impact/High-temp housing. U.L. Listed, CSA approved. Powdered, pre-catalyzed water-activated glue designed to provide strong, durable bonds for wood and wood products. For veneering, cabinet work, general woodworking applications, laminating, edge gluing, chopping blocks, counter tops, furniture, cutting boards and plates. Bonds laminates to wood, particleboard and plywood. Forms a high strength, water-resistant bond. Resistant to fungi, bacteria, oil, gasoline, or solvents. One pound adhesive powder plus water at .0006 inch glue line covers about 40 sq. ft.
Franklin 6201 Wood Adhesive Franklin 6211 Wood Adhesive Franklin 6221 Titebond Wood Adhesive
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges. Also can be used as a finish. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5 cps viscosity offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 1. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. An activator must be applied to the surface before using this item. See SKU # 290.4241 for activator. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp and bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 1500 cps viscosity offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
Franklin 6231 Titebond Wood Adhesive Gel Franklin Titebond II Weatherproof Wood Glue Glue-All Max E9416 Polyurethane Glue
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges.  Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5000 cps viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. NOT recommended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards). Bonds metal, stone, wood and more. Waterproof, sandable and paintable. Low foaming and less mess.
GLUE ORIGINAL GORILLA 8OZ     Eclectic Amazing Goop Supermend Epoxy Paste ITW Permatex 24010 Gel Twist Thread Locking Compound
Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours. Fills holes and cracks to any size or depth. Use to treat dry rot areas and repair gutters, steps, sundecks, porches, concrete floors and walls, tanks, window sills, garden pools, fuel tanks, cracked toilets and basins. 15 minutes work time. Bonds permanently to metal, plastic, wood, tile, concrete, etc. Impervious to gas, oil, brine and alkaline cleaners. Remains flexible and can be sawed, drilled, tapped, sanded, and painted. Gel formula provides "liquid-reliability" without drips, globs, mess or waste. For all nut and bolt applications 1/4 inch to 3/4 inch. Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N.
Perma-Lock 24213 Medium Strength Thread Locking Compound Perma-Lock 27113 Thread Locking Compound Permatex 27200 High Temperature Threadlocker
Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. Use to seal the threads against leakage and prevent rust and corrosion. Can be used on 1/4" to 1" fasteners. High strength for heavy-duty applications. Suited for permanently locking studs. Locks against vibration loosening. Temperature resistant to 300-degrees Fahrenheit. OEM Approved. Use for camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads and ring gear or shock bolts. For all 3/8" to 1" diameter nut and bolt assemblies. Seals against leakage; prevents bolts and press fits from loosening due to shock, severe vibration and heat stress. Protects threads from corrosion. Removable with hand tools for easy disassembly. Resistant to chemicals and dripping from threads during assembly. For newer engines and high-performance applications that require extreme temperature resistance. -65 to 450 degrees Fahrenheit temperature resistance range. Heavy duty.
Stanley Tools GR25-2 Dualmelt Glue Guns Dap 00492 Weldwood Carpenter's Wood Glue Protective Coating PC-7 2-Part Epoxy Adhesive
High- and low-temperature gluing. One-touch high/low selector switch. Uses standard dual-temperature glue on both settings and hot-melt formulas on high setting. Fold-out stand. Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC. Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.
J-b Weld Professional 2-Part Weld Epoxy PC-Woody PC-WOODY 6OZ Wood Filler Epoxy Adhesive ADHESIVE HARDENER 4.5OZ
ADHESIVE HARDENER 4.5OZ
Our Price: $14.95
Use to fix, bond, or fill-in the shop, factory, or field. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted.  Includes two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's waterproof; petroleum, and acid-resistant; resists shock, vibration, and extreme temperature fluctuations also withstands temperatures up to 300 degrees Fahrenheit. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chemicals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing. Stainable. A clear, extremely strong, non-shrinking adhesive, specially formulated for high-clarity and good impact strength.  Waterproof.  Resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze. Bonds to acrylic, china, fiberglass, metal, wood, concrete, ceramic, glass. 2500 psi. Water resistant. 30 minutes handling time. Non-shrinking. May be tinted with chalk or pigment.
Franklin Titebond III Ultimate Wood Glue Rust-Oleum 210188 Marking Pistol Franklin 6212 Wood Adhesive
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Use with Rust-Oleum inverted marking paint. Accurate marking. Light touch spray control. Comfortable grip. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
Quikrete 1150-47 Jointing Sand 50 lb Franklin 6202 Wood Adhesive 5-Minute S209 VersaChem Epoxy Adhesive
A polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once swept into pavers joints and dampened with water it hardens, locking pavers into place. Designed to resist weed growth and insects, erosion, non-staining, use for installation of pavers or replacing existing joints. Coverage area 50-55 square feet tumbled pavers. 85-90 square feet regular pavers. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges. Also can be used as a finish. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5 cps viscosity offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 1. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Rapid-curing general purpose epoxy. Starts setting in 5 minutes.  Works on ceramics, china, concrete, fiberglass, glass, tiles, wood, metal, chrome and more. Paintable and sandable. Bonding strength 1,500 psi.
Protective Coating PC-11 Marine Grade Epoxy Adhesive Titebond 5066 Aliphatic Resin Emulsion Original Wood Glue GLUE ORIGINAL GORILLA 18OZ
Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing. Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours.
Arrow TR550 Electro-Matic Glue Guns Franklin Titebond II Weatherproof Wood Glue ADHESIVE EPOXY W/NOZ GRY 10OZ
Clutch mechanism prevents glue backup. Built-in drip tray/stand. Interchangeable nozzle. Check valve controls glue flow. High volume melt chamber for fast and steady even application. Solid state P.T.C heating system develops heat quicker and holds temperature for smooth consistent bonding. Design keeps heat flow away from handle so it does not get hot. 120VAC, 40W. U.L. Listed, CSA approved. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards). Allows you to post install threaded rod and rebar. All-weather formula makes it ideal for outdoor civil infrastructure projects and other jobs involving wet jobsite conditions. Can be used for structural and nonstructural anchoring in concrete, block, and brick.
Whizz 57100 Paint Bucket Grids Protective Coating PC-7 2-Part Epoxy Adhesive PC Concrete 72561 2-Part Concrete Epoxy
Fits in a gallon can. Converts gallon can into paint loading system. Compatible with all whizz 2" and 4" rollers. Plastic construction. Will not rust. May be sealed-in can. Easy to clean. Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing. Injectable repair and anchoring epoxy. Use to repair and anchor concrete using a standard caulking gun. Moisture insensitive. May be used in damp or underwater environments. May be used in concrete, hollow block, brick, clay and stone. For vertical, horizontal, overhead and screen applications. Does not shrink and can be applied wet, dry or underwater. Seismic anchoring and bracing. Surface crack repair. Miami-Dade product control approved. TENSION LOAD (1/2 inch) - 22,238 Lbs. (153 Mpa).
Sika AnchorFix-1 2-Component Anchoring Adhesive Rust-Oleum 2393000 Marking Wand Rust-Oleum 2388000 Marking Wand
2-Component, solvent- and styrene-free adhesive. Fast-curing. For all grades of rebars, threaded rods, bolts and special fastening systems. Use to install in concrete and masonry base materials. Low sensitivity to mixing errors. Low waste. Fits a standard, good quality caulking gun. Use with Rust-Oleum marking paint. For upright marking. No mess. Comfortable grip. Lightweight. Durable construction. Use with Rust-oleum inverted striping paint. For upright striping. No mess. Comfortable grip. Lightweight. Durable steel and plastic construction. Detachable wheel.
Titebond 3706 Cross-Linking Polyvinyl Acetate Dark Wood Glue Sika AnchorFix-2 2-Component Acrylic Anchor Adhesive Quikrete 862030 Fastset Anchoring Epoxy
For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water. Super strong adhesive that exhibits high load capacities and can be dispensed in all types of weather conditions. Cures in colder base material temperatures. Certified to ANSI / NSF - 61 by UL. Suitable for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Can be used for fastening in grout filled block and unreinforced masonry, and seismic anchoring and bracing. Approximately 5 min at 77-degree F working time. Non-sag, solvent-free, low odor formula.
Quikrete 862031 Anchoring Epoxy Elemer's E7050 Wood Glue J-b Weld 40005 Epoxy Putty Kit
Suitable for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Can be used for fastening in grout filled block and unreinforced masonry, and seismic anchoring and bracing. Approximately 15 min at 77-degree F working time. Solvent-free, low odor, high strength, moisture insensitive, non-sag adhesive. High modulus. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Hand mixable putty formulated to repair and rebuild wood quickly and easily. Adds structural strength to areas of damaged or rotted wood. Can be used to fill, build, reinforce or bond wood surfaces. After mixing, it forms a polymer compound that cures to the same density as wood. May be used for exterior or interior applications. Contains no solvents. will not rot, shrink, crack or pull away. Can be sanded, tapped, machined, dripped, filed and painted. Contains 6 oz tub Part A, 6 oz Part B, plastic spreader and pair protective gloves.
ITW Permatex 24240 Thread Locking Compound ITW Permatex 27140 Thread Locking Compound Protective Coating PC-11 Marine Grade Epoxy Adhesive
All purpose medium strength thread locker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch. Protects threads from corrosion. Removable with hand tools for easy disassembly. High strength thread locker for heavy-duty applications 3/8 inch to 1 inch. Well-suited for permanently locking studs and press fits. Adds 3,000 psi holding power on slip and press fit assemblies. May require heat or special tools for removal. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.
Eclectic Amazing Goop Supermend Epoxy Paste Franklin Titebond III Ultimate Wood Glue Dap 00493 Weldwood Carpenter's Wood Glue
Fills holes and cracks to any size or depth. Use to treat dry rot areas and repair gutters, steps, sundecks, porches, concrete floors and walls, tanks, window sills, garden pools, fuel tanks, cracked toilets and basins. 15 minutes work time. Bonds permanently to metal, plastic, wood, tile, concrete, etc. Impervious to gas, oil, brine and alkaline cleaners. Remains flexible and can be sawed, drilled, tapped, sanded, and painted. Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC.
PAINT GRID FITS GALLON        J-b Weld 8265 Cold Welding Compound Display Elmer's E7330 Wood Glue Max Carpenter's Wood Glue
Fits directly into a gallon paint can, eliminating paint tray. Designed for use with quick pro rollers. Red. Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains a hardening compound. Display includes six pair tubes, each pair wrapped with instructions. 1 Oz each. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic.
Flow-Mix VersaChem Cold Weld Epoxy Elmer's E1009 Super Fast Epoxy Cement Dap 00204 Weldwood Wood Glue
Rapid-curing epoxy. Works best on steel, copper, aluminum, bronze, metal and iron. Flow-Mix nozzle allows for self-mixing and no mess. Sandable and paintable. 1,500 psi. Start setting up in 5 minutes. For indoor or outdoor applications where you need a fast, rigid bond. Perfect for use on most plastics, woods and metals. Two-part formula with hardener provides a fast 5 minute set time that reaches full strength between 12-24 hours. For a tighter bond use in conjunction with SKU# 060.7515. Powdered, pre-catalyzed water-activated glue designed to provide strong, durable bonds for wood and wood products. For veneering, cabinet work, general woodworking applications, laminating, edge gluing, chopping blocks, counter tops, furniture, cutting boards and plates. Bonds laminates to wood, particleboard and plywood. Forms a high strength, water-resistant bond. Resistant to fungi, bacteria, oil, gasoline, or solvents. One pound adhesive powder plus water at .0006 inch glue line covers about 40 sq. ft.
Stanley Tools GR100 Glue Pro Glue Guns Encore Plastics 2T1 Touch N' Trim Paper Container Wagner 316-505 High Pressure Hose
Industrial performance with consumer appeal. Auto shut-off light for safety, reliability, and extended life. Dual heater for 40-percent more glue output. Temperature switch for high and low temperature glue applications. On/Off light and protected nozzle for added safety. Soft, comfort grip, non-slip trigger action. For quick touch-up. Available with both quart and liter measurements. Also can be used as a throw-away liner for metal pail. Eliminates messy clean-ups. Suitable for airless equipment up to 3300 PSI.1/4" x 50' Hose. Rental.
Wagner 651 G-Thread Extension Wand For Use With Spray Guns GLUE ORIGINAL GORILLA 36OZ    Encore Plastics 10T1 Touch N' Trim Paper Container
Light weight, easy to handle. Rental. Water activated, it expands into materials to form a strong bond to virtually anything. Waterproof. Expansion allows it to penetrate the glued surface for a superior bond. Can be sanded, painted, and stained. Clamps in 1-2 hours. 10-15 minutes open time. Dries in 80-percent in 1-2 hours. Dries to a light tan color. Full cure in 24 hours. For quick touch-up. Available with both quart and liter measurements. Also can be used as a throw-away liner for metal pail. Eliminates messy clean-ups.
Encore Plastics 500434 Touch N' Trim Paper Container Wagner 0521424 Hose Cover Rust-Oleum 2395000 Striping Machine
For quick touch-up. Available with both quart and liter measurements. Also can be used as a throw-away liner for metal pail. Eliminates messy clean-ups. Protects your airless hose from paint and abrasion damage. Comes in 1000' roll with perforations each 50'. Rental. Creates 2-4" straight lines. Covers a larger area in shorter time. Storage compartment holds 12 extra cans. Sturdy steel construction. Collapsible handle for easy storage.
Rust-Oleum 206346 Striping Machine GLUE WATERPROOF HD MINI 4OZ   Quikrete 1103-40 Sand (Topping) Mix
Creates 3-6" straight lines. Covers a larger area in shorter time. Storage compartment holds 12 extra cans. Sturdy steel construction. Collapsible handle for easy storage. Large diameter wheels to accommodate high grass conditions. For quick repairs on the go. Lightweight, portable and so easy to use. Can be used on dry or wet surfaces and even underwater. Strong instant grab adhesive that works like a magnet, locks into place and holds on tight. Can be applied to overhead surfaces. Paintable. Solvent-free. Remains flexible. No run or drip during application. Mold and mildew resistant. UV and weathering resistant. Low odor adhesive. Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
Quikrete 1152-53 All Purpose Sand 50 lb Quikrete 1113-51 Play Sand Quikrete 1103-60 Sand (Topping) Mix
A washed properly graded sand used for underlayment for brick pavers, mixed to make concrete, traction for snow and ice, can be mixed with potting soil. Meets ATM C 33 specifications. Use for children's sand boxes, molding and building. Specially grades washed sand that has been dried and screened. Fills approximately 1/2 cubic feet. Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
   
 
1