Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > WHITE GLUE
Choose a sub category:
FLOOR FINISHING PADS FLOOR FINISHING PADS STAINING ACCESSORIES
STAINING ACCESSORIES PAINTERS MITT PAINTERS MITT
Sort By:
1
Glue-All E1323 Glue Trimaco 10101 Supertuff Staining Pads Glue-All E3810 Glue
For all porous materials, best on paper, cloth, wood, pottery, cardboard, etc. Designed for general repair and household or craft projects of consumers and light DIYers. No clog, easy-flow cap. Free flowing, dries strong, paintable. Safe and easy to use, ACMI certified non-toxic. Soft, 100-percent cotton terry cloth covered sponge. Use for staining, antiquing, waxing, polishing or washing most wood surfaces. Includes 1 pair of disposable gloves. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
Trimaco 10301 Absorbent Deluxe Cheese Cloth Elmer's E304 School Glue Glue-All E3820 Glue
For cooking and straining, dusting and buffing, staining, polishing, and faux finishing. Bleached white cotton. Absorbent. Washes out in soap and water - even after drying. Provides fast, strong bond on wood, paper, cloth, and other porous materials. Ideal for children. Shatter-resistant plastic squeeze bottle. No-clog, easy-flow cap. Dries clear and odorless. Safe and non-toxic, ACMI certified. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
Trimaco 10303 Absorbent Deluxe Cheese Cloth Henkel Quick Set Epoxy Resin Loctite Mastermind Epoxy Resin
For cooking and straining, dusting and buffing, staining, polishing, and faux finishing. Bleached white cotton. Absorbent. Two-part adhesive consisting of an epoxy resin and a hardener. Bonds in 5 minutes. Dual syringe delivers equal parts. For a wide range of materials or a s a versatile filler for gap filling, surface repairs and laminating. Can be sanded and drilled. 3,200 psi. For complex multi-piece assemblies. For a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating. Does not shrink. Can be tinted with earth pigments, cement or sand for color matching. Can be sanded and drilled. Two-part system consisting of an epoxy resin and a hardener in a dual syringe. High Strength bond. Sets in 60 minutes. 3,000 psi.
Craftbond E431 Fabric and Paper Glue ITW Permatex 84107 Permapoxy Epoxy Devcon S208 Epoxy Anchoring Adhesive
For scrapbooking, paper crafting and fabrics. Bonded fabric is launderable. Acid-glue. Doesn't run, bonds quickly. Dries clear. Remains flexible after drying. Non-toxic. Versatile, easy-to-use, multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Sets in 30 minutes. Permanent strength up to 3,500 psi. Clear. The syringe gives correct amounts of resin and hardener automatically. No measuring required. Includes snap-off-snap-on cap and handy mixing paddle. Works on metal, wood, chrome, glass, concrete, fiberglass, tiles, ceramic, china and more. Sandable and paintable. Starts setting in 5 minutes. 1,500 psi bond strength.
2 Ton S35 Medium-Cure Epoxy Adhesive Devcon S-5 VersaChem Plastic Steel Epoxy 3M 18094 Quick Set Epoxy
Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Non-shrinking. Sandable and paintable. Fast curing and high strength epoxy. When fully cured, can be drilled, threaded, tapped or filled. Contains a steel alloy that does not rust.  Use it on all metals including steel, stainless steel, aluminum, brass, iron and pewter. Non-flammable. Use to repair metal, china, glass and plastics. Sets up in 5 minutes. Dries clear.
GE GE280 Household Glue and Sealant Flow-Mix 21445 Epoxy GE GE361A Glue/Sealant
Waterproofs, seals and insulates; will not chip, crack or crumble, stays flexible from -65 to 400 degrees Fahrenheit. Adheres to wood, masonry, metal, glass, plastic and fiberglass. 6-8 minute working time. 30 minute tack free time, 24 hour cure time. Expose to water in 30 minutes. 100-percent silicone. For application requiring fast curing and instant adhesion. Non-shrinking. Fills gaps. Flow-Mix applicator allows for self-mixing. Sandable and paintable. Works on glass, metal, fiberglass and ceramics. Starts setting in 60 seconds. 1,200 psi bond strength. This is a general-purpose glue for project repairs around the house. Creates a permanently waterproof seal with airtight adhesion. Adheres to tile, porcelain, glass, wood, steel, aluminum, and some plastics.
CraftBond E425 No-Wrinkle Rubber Cement ITW Permatex 84101 Permapoxy Epoxy Precision Valve 368 Power Unit
For artwork or photos. Acid-free. Dries clear. Includes brush applicator. Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. 3,400 psi. 5 minute set time. For small quick jobs that do not involve the use of a bottle. Sprays from a cup or a cap. Will spray most paints, thinners, lacquer, shellac, cleaners, solvents, gel coats, and other liquids.
ITW Permatex 84115 Permapoxy Epoxy 5 Minute S205 Fast-Curing Thixotropic Epoxy Adhesive Loctite 1360788 Epoxy Plastic Bonder
Multi-purpose epoxy adhesive for metals, fabric, fiberglass, glass, rubber, concrete and most plastics. When cured, can be drilled, sanded, threaded or filed. Resistant to fuels and solvents. Resists most liquids. Great for automotive applications. Convenient 2-part dispensing syringe. Fills gaps and bonds trim. Use on casting cracks and holes, auto trim and ornaments. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Works on metal, wood, chrome, tile, glass, fiberglass, concrete, ceramic, china and more. Sandable and paintable. 1,500 psi bond strength. Formulated to bond and repair plastic surfaces. Double syringe dispenses equal amounts of each component. Components react to produce a tough, rigid, high strength bond in 20 to 25 min. Does not shrink and is resistant to water, most common solvents and shop fluids. High impact resistance. Can be sanded and drilled.
2 Ton S31 Medium-Cure Epoxy Adhesive Plastic Steel S-6 2-Part Metal Repair Epoxy Devcon S220 Impact Resistant Water Resistant Plastic Welder
Works on metals, wood, concrete, ceramic, glass, china, fiberglass and chrome. Formulated for high clarity, good impact and high strength. Extra strong bond for heavier objects, 2500 PSI bond strength. 30 minute working time. Dries clear. Non-shrinking. Resealable tip. Sandable and paintable. Fast curing and high strength epoxy.  When fully cured, can be drilled, threaded, tapped or filled.  Easy flow syringe with a Snap-On cap that allows for storage and reuse. Use it on all metals including steel, stainless steel, aluminum, brass, copper, iron and pewter. Fills gaps and hardens to a metallic mass. Non-flammable. Bonds similar and dissimilar materials. Use on unprepared metals, ceramics, wood, concrete and hard plastics. Minimal surface preparation required. Resistant to weathering, humidity and wide temperature variations. Bonding strength 3,500 psi.
Dap 00694 Silicone Rubber Sealant Dap 00688 Silicone Rubber Sealant Protective Coating PC-11 Marine? Epoxy
Gives a flexible seal auto and marine applications. Forms a waterproof seal.  Will not crack or shrink. Adheres to glass, fiberglass, porcelain, ceramic, canvas, painted surfaces, rubber, plastic and metal. Withstands engine heat up to 400 degrees Fahrenheit. Resist vibrations, offers elasticity, and long-life reliability. Use to build or repair aquariums. Provides a waterproof and watertight seal. Harmless to fresh and saltwater fish when cured. Will not crack or shrink. Meets ASTM Specification C290, Class 25, Type S, Grade NS. Use to make wet surface and underwater repairs. Boat, water and stock tanks, spas,  tubs, plumbing and porcelain. Cures: wet, dry and underwater.
Devcon S120 VersaChem Silicone Adhesive ITW 5 Minute Flow-Mix Automix Epoxy Loctite Instant Mix Epoxy Resin
Can be used for sealing, caulking and bonding. Forms a tough, flexible and waterproof seal that resists aging and weathering without hardening. Use it to weather-proof electrical components, seal or repair windows, door frames, vinyl tops and more. Designed to seal mechanical assemblies, making gaskets and weather-proofing electrical components. Use on metal, glass, wood, silicone resin, rubber, ceramics, concrete, painted surfaces and more. Tough and flexible. Bonding strength 700 psi. Non-sagging. OEM approved. Rapid-curing, general purpose epoxy. Starts setting in 5 minutes. Flow-Mix nozzle allows for self-mixing and no mess. Works on metal, wood, concrete, chrome, fiberglass, tiles, ceramic, glass, china and more. Bond strength 1,500 psi. Starts setting in 5 minutes. Can be as an adhesive for a wide range of materials or as a filler for gap bonding, surface repairs and laminating. Does not shrink. Resistant to water and most common solvents. Can be tinted with earth pigments, cement or sand. Can be sanded and drilled. 3200 psi bond. 5 min setting time. Reaches handling strength in a hour.
PC-Fast-N EZ 61411 2-Part Epoxy Adhesive PC-Clear 70147 Fast Curing Medium Viscosity Epoxy Adhesive 5 Minute S210 Fast-Curing Thixotropic Epoxy Adhesive
Use as a general purpose adhesive to bond wood, metal, fiberglass, ceramics, glass and many hard plastics. Forms a water-resistant bond and is tough enough to be drilled, tapped, filled or sanded after final cure. Low-odor. 2-component. Cures rapidly at room temperature with exceptional tensile adhesion and peel strength to a wide variety of substrates. Forms a tough bond without the need for clamping. Flexible. 1,700 psi tensile shear strength. Medium viscosity liquid epoxy system with greater clarity than other epoxies. Can be used for repairs and projects. Fast curing, but allows ample time to apply and position the repair, 4 minute work time and total cure is 1 hour. Not brittle when cured, forms a tough and resilient bond. 2,300 psi tensile shear strength. Rapid-curing general purpose. Will not drip or sag. For vertical or overhead applications. Use on metal, wood, chrome, concrete, glass, ceramics, fiberglass, china, tiles and more. Sandable and paintable. Fills gaps. Bonding strength 2,500 psi.
Preval 367 Aerosol Based Spray Gun Loctite Mastermind Epoxy Metal/Concrete Resin J-B Weld 8276 Jb Kwik Weld Cold Weld Compound
For small quick jobs. Will spray most paints, thinners, lacquer, shellac, cleaners, solvents, gel coats and other liquids. Bottle holds up to 6oz. For repairing, filling and rebuilding all metals and concrete surfaces. High strength bond in 5 to 12 minutes. Does not shrink is resistant to water and most common solvents. Cured epoxies can be drilled, tapped, threaded or filed. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted. Use equal portions from the black and orange tubes. Mix thoroughly. Pliable for about 2 minutes after mixing. Sets in 4 minutes and cures fully in 4 hours. Water-proof, petroleum-, chemical-, and acid-resistant. Resists shock, vibration and extreme temperature fluctuations and withstands temperatures up to 300 degrees-Fahrenheit. Non-toxic. Bonds to virtually any combination of iron, steel, copper, aluminum, brass, bronze, pewter, porcelain, ceramic, marble, glass, PVC & ABS, concrete, fiberglass, wood, fabric, paper just about any porous and non-porous material. Can be clean up with soap and water before it sets.
PC Fahrenheit 25543 2-Part Hand Moldable Epoxy Adhesive Devcon 21245 Water Resistant Epoxy Anchoring Adhesive J-b Weld PlasticWeld Quick Setting Epoxy Adhesive
Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes. For applications requiring fast curing and instant adhesion. Also use to fill gaps. Works on metal, glass, fiberglass and ceramic. Sandable and paintable. Starts to set in 60 seconds. Super-fast, general purpose. 1,250 PSI strength. Bonds a variety of surfaces which include ABS & PVC plastics, fiberglass, metals and more. Sets in 5 min and cures in 1 hour. 3200 PSI. Dries off white.
CraftBond E421 Spray Adhesive 2-Ton Epoxy Flow-Mix VersaChem Epoxy Syringe Glue-All E3830 Washable Glue
Fast-tack acid-free adhesive creates a temporary or permanent bond and resists bleed-through for more professional results. For adhering lightweight materials such as photos, paper, fabrics, cork, leather, canvas, foam, foil, films, cardboard, and felt. With wide pad nozzle for no-mess application. Formulated for high clarity, good impact and high strength. Use on metal, wood, concrete, glass, ceramics, china, fiberglass and chrome. Dries clear. Application allows for self-mixing and no mess. 2,500 psi. 30 minute working time. Non-shrinking. Sandable and paintable. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
Devcon 44029 Epoxy Putty EPOXY GLUE GORILLA 0.85OZ     PC-Woody PC-WOODY 1.5OZ Wood Filler Epoxy Adhesive
Permanently repairs leaks, holes, cracks in metal, fiberglass, concrete and more. When fully cured, it can be drilled, filed, sanded and painted. Works on metals, copper, brass, steel, aluminum, iron, concrete and wood. Chemical resistant. Solvent and water resistance. Strong and durable for household and automotive repairs alike. Two-part, gap-filling formula easily bonds steel, aluminum, wood, ceramic, tile and most plastics. Dries crystal-clear in 24 hours. Clamp Time: 30 Minutes. Open Time: 5 Minutes. 3300 PSI bond strength. Includes resealable cap, stir stick and mixing tray. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chemicals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing.
J-B Weld 8265S Jb Weld Cold Weld Compound PC-Crete 25581 Hand Moldable Epoxy Putty PC-Lumber 25574 Moldable Epoxy Putty
Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains hardening compound. For emergency repairs to masonry and concrete surfaces including concrete steps, brick, mortar, stucco, curbs, pipes; conduit holes, nail and screw damage to walls and floors; and for stripped anchor bolts. Also for places where concrete has been broken or missing such as lawn ornaments or statues. Hand mixed, 2 to 3 minute working time. Cures in 30 to 60 minutes. Looks and feels like concrete. Nonconductive with -20 to 300 degrees Fahrenheit temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 650 psi tensil shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, airtight plastic cylinder. For emergency repairs in wood; fill nail and screw holes, gouges; and replace rotted and worn wood. Replace and reshape wood parts, restore ornate wood pieces and carvings; repair damaged furniture, moldings, doors, frames, and wood floors. Hand mixed with 15 minute working time. Cures in 60 minutes. May be sanded, stained or painted. Wood color blends with light colored wood. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 500 psi tensil/shear strength. Packed in resealable, airtight plastic cylinder.
J-B Weld 8277 Epoxy Adhesive PC-Marine 25567 Hand Moldable Epoxy Putty PC-Super 16619 Epoxy Putty
Use Waterweld as an adhesive, laminate, plug, filler, sealant, electrical insulator, and to patch holes and cracks. It can be formed, drilled, ground, sawn, tapped, machined, filled, sanded, painted and applied under water. Stays pliable for about 2 minutes after mixing, sets in just 20 minutes, and cures fully in just a few hours. Waterproof and withstands temperatures up to 300 degrees Fahrenheit. Approved by the national sanitation foundation. For emergency repairs in salt or fresh water, for improved resistance to moisture. Suited for repairs to boats, water and stock tanks, fish boxes, spas and tubs, downspouts and gutters. Cures wet, dry or in water in pools, fiberglass and bath fixtures. Hand mixed with 15-20 minute working time. Cures in 60 minutes. May be shaped, drilled, sanded, sawed, filed and painted. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 700 psi tensil shear strength. 75 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. Use for bonding, sealing and as a filler for most materials including fiberglass, wood, concrete, metal, brick, glass, block, ceramics, hard plastics and more. Can be applied to both vertical and overhead surfaces without drip or sag. 15 minutes max working time at 70 degrees Fahrenheit. 45 minutes tack free, 3 to 4 hours for service, 3 to 7 days for max cure. Chemical resistance to most chemicals, salt water, gasoline and fuel oil. Non-conductive, -20 to 200 degrees Fahrenheit temperature range, 2,650 psi tensile shear strength. 78 hardness shore D after 1 week of curing.
SYRINGE WELD STEEL 25ML       Protective PC-11 2OZ. Pc-11 Epoxy Paste J-b Weld PlasticWeld KwikPlastic Epoxy Putty
Two-part, high strength, cold welding adhesive and filler system that eliminates the need for welding or brazing. Can be used to bond many types of metals. Sets in four minutes, no clamping needed. Dark grey appearance. Fills gaps and will not shrink. When cured, can be drilled, sanded, threaded or filed. Resistant to water and solvents. Temperature range -60-degree F to 300-degree F. Permanent strength up to 4500 PSI. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing. Repairs and rebuilds anything made of ABS, PVC and CPVC. Bonds instantly. Does not shrink or pull away. Sets in 20-25 minutes. Can be sanded, drilled, painted or sawed in 2-3 hours.
PC-Metal 25550 Hand Moldable Epoxy Putty J-b Weld 8272 2-Part Marineweld Epoxy United Gilsonite 14337 Wood Graining Tool
For emergency automotive and plumbing repairs of gas tanks, radiators, holes or dents. Use on drums, steel doors, tanks, pipes, wherever metal is missing, dented or broken. Hand mixed with 3 minute working time. Cures in 30-60 minutes. May be sanded, drilled, sawed and painted after set. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 900 psi tensile shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder. Blocks saltwater, chemicals, oil, acids and other corrosive materials. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. For maintaining and repairing a wide variety of boating and marine products. Tolerates extreme temperature fluctuations. Includes two tubes, a 1 oz liquid steel/epoxy resin and a 1 oz hardener. Simulate beautiful wood grain. For furniture, cabinets, woodwork. Simple technique. Works on metal, plastic and wood.
J-b Weld ClearWeld Quick Setting Epoxy Syringe J-b Weld Woodweld Quick Setting Wood Epoxy Adhesive Loctite Mastermind Epoxy Putty
Multi-purpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. Designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. 1:1 mixing ratio. Sets in 5 min and will fully cure overnight. Tensile strength of 3200 PSI. Sets to a hard, permanent bond. Use to repair anything made of wood. Sets in 6-8 minutes. No clamping necessary. Cures and paintable in one hour. 2-part. Can be drilled and tapped. Natural light wood color. (2) 1 oz tubes. Suitable for use on plumbing, tubs & showers, pipes, potable water tanks, fiberglass, marine & pool, ceramic, PVC, aluminum, wood, brick, metal, concrete, rigid and semi-flexible plastic. It bonds metal, wood, ceramic, brick, most plastics and concrete. Can be sanded, drilled, tapped and painted. Produces a hard, tough, permanent and waterproof bond on a wide range of materials.
J-b Weld KwikWeld Quick Setting Epoxy Syringe J-B Weld 8267S J-B Steelstik Adhesive/Sealant Protective 027776 Pc-7 Epoxy Paste
Fast setting version of the Original J-B Weld. Provides repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. 1:1 mixing ratio. Sets in 6 minutes. Fully cured in 4-6 hours. Cures to a dark grey color. 2424 PSI tensile strength. Withstand temperatures up to 300-degrees F. Hand kneadable, steel-reinforced epoxy putty. Plug holes and make permanent repairs on wet and dry surfaces. Can be drilled, sanded, filed, tapped, machined, and painted. Use as an adhesive, laminate, plug, filler, sealant, and electrical insulator. Cures in 20 - 30 minutes. Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; use as a sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minutes tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.
EPOXY CLEAR 25ML SYRINGE W/CAP STICK PLASTIC REPAIR 2OZ      EPOXY MARINE 25ML SYRNGE W/CAP
High-strength, two-part instant setting epoxy. Set under most temperature conditions in one minute. Designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal. Strength of 2850 PSI. 1 Minute set time. Cures clear in one hour. Use to repair, rebuild or seal most all types of plastics. Two part, hand kneadable, putty type industrial strength epoxy in stick form. Non-shrinking, non-flammable and is safe for repairs that come in contact with drinking water. Once cured, repair can be drilled, sanded and painted. NSF certified drinking water safe. Withstands moderate temperatures. 10 minute working time. Useable in 3 hours. Up to 350 PSI strength. Dries off-white. Two part Cold-Weld adhesive system that provides repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. Sets in 20 minutes at room temperature. At full cure, its color is white. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters? surface. 1:1 mixing ratio and tensile strength of 3200 PSI.
H2 Hold VersaChem Flexible Underwater Epoxy Syringe CraftBond E422 Spray Adhesive Glue-All E3850 All Purpose Glue
Flexible, tough and non-corrosive. Sticks and cures under water. Use on PVC, fiberglass, wood, metal, acrylic, fabrics, ceramics, masonry and more. Can be applied to wet or dry surfaces. 1800 psi super high strength. Sandable and paintable. Fast-tack acid-free adhesive creates a temporary or permanent bond and resists bleed-through for more professional results. For adhering lightweight materials such as photos, paper, fabrics, cork, leather, canvas, foam, foil, films, cardboard, and felt. With wide pad nozzle for no-mess application. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
Eclectic Amazing Goop Supermend Epoxy Paste Protective Coating PC-7 2-Part Epoxy Adhesive PC-Woody PC-WOODY 6OZ Wood Filler Epoxy Adhesive
Fills holes and cracks to any size or depth. Use to treat dry rot areas and repair gutters, steps, sundecks, porches, concrete floors and walls, tanks, window sills, garden pools, fuel tanks, cracked toilets and basins. 15 minutes work time. Bonds permanently to metal, plastic, wood, tile, concrete, etc. Impervious to gas, oil, brine and alkaline cleaners. Remains flexible and can be sawed, drilled, tapped, sanded, and painted. Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing. Replace missing/rotted wood with structural strength greater than most wood. Permanently repair window sills, frames, cornish, furniture, decking; rebuild missing wood; bridge or reinforce larger holes with screen wire or wood blocks. 30-40 minute working time. 90 minutes tack free, overnight for service, 1 week max cure time at 70 degrees Fahrenheit. After cure work and tool like real wood. Contains real wood pieces. Resistant to weather elements, mildew, dry rot, UV light, fresh and salt water, and chemicals present in pressure treated wood. No vise or clamp needed for most applications. Will not drip or sag when applied to flat, vertical or overhead surfaces. 850 psi tensile shear strength. 50-55 hardness shore D after 1 week of curing. Stainable.
J-b Weld Professional 2-Part Weld Epoxy ADHESIVE HARDENER 4.5OZ       Protective Coating PC-11 Marine Grade Epoxy Adhesive
ADHESIVE HARDENER 4.5OZ
Our Price: $14.95
Use to fix, bond, or fill-in the shop, factory, or field. Can be formed, drilled, ground, tapped, machined, filled, sanded, and painted.  Includes two tubes. One contains liquid steel/epoxy resin, and the other contains hardener. When mixed together in equal portions, a chemical reaction occurs that turns the mixture into a compound as hard and tough as steel. It stays pliable for about 30 minutes after mixing, sets in 4-6 hours, and cures fully in 15-24 hours. It's waterproof; petroleum, and acid-resistant; resists shock, vibration, and extreme temperature fluctuations also withstands temperatures up to 300 degrees Fahrenheit. A clear, extremely strong, non-shrinking adhesive, specially formulated for high-clarity and good impact strength.  Waterproof.  Resists salt solution, unleaded gasoline, mineral spirits, oil and anti-freeze. Bonds to acrylic, china, fiberglass, metal, wood, concrete, ceramic, glass. 2500 psi. Water resistant. 30 minutes handling time. Non-shrinking. May be tinted with chalk or pigment. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing.
5-Minute S209 VersaChem Epoxy Adhesive ADHESIVE EPOXY W/NOZ GRY 10OZ Protective Coating PC-7 2-Part Epoxy Adhesive
Rapid-curing general purpose epoxy. Starts setting in 5 minutes.  Works on ceramics, china, concrete, fiberglass, glass, tiles, wood, metal, chrome and more. Paintable and sandable. Bonding strength 1,500 psi. Allows you to post install threaded rod and rebar. All-weather formula makes it ideal for outdoor civil infrastructure projects and other jobs involving wet jobsite conditions. Can be used for structural and nonstructural anchoring in concrete, block, and brick. Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.
PC Concrete 72561 2-Part Concrete Epoxy Sika AnchorFix-1 2-Component Anchoring Adhesive Sika AnchorFix-2 2-Component Acrylic Anchor Adhesive
Injectable repair and anchoring epoxy. Use to repair and anchor concrete using a standard caulking gun. Moisture insensitive. May be used in damp or underwater environments. May be used in concrete, hollow block, brick, clay and stone. For vertical, horizontal, overhead and screen applications. Does not shrink and can be applied wet, dry or underwater. Seismic anchoring and bracing. Surface crack repair. Miami-Dade product control approved. TENSION LOAD (1/2 inch) - 22,238 Lbs. (153 Mpa). 2-Component, solvent- and styrene-free adhesive. Fast-curing. For all grades of rebars, threaded rods, bolts and special fastening systems. Use to install in concrete and masonry base materials. Low sensitivity to mixing errors. Low waste. Fits a standard, good quality caulking gun. Super strong adhesive that exhibits high load capacities and can be dispensed in all types of weather conditions. Cures in colder base material temperatures. Certified to ANSI / NSF - 61 by UL.
Quikrete 862030 Fastset Anchoring Epoxy Quikrete 862031 Anchoring Epoxy Glue-All E3860 Glue
Suitable for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Can be used for fastening in grout filled block and unreinforced masonry, and seismic anchoring and bracing. Approximately 5 min at 77-degree F working time. Non-sag, solvent-free, low odor formula. Suitable for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates. Can be used for fastening in grout filled block and unreinforced masonry, and seismic anchoring and bracing. Approximately 15 min at 77-degree F working time. Solvent-free, low odor, high strength, moisture insensitive, non-sag adhesive. High modulus. For interior home repairs and quick fixes. Bonds strong to a variety of surfaces. Goes on white, dries clear. Easy water clean-up. Non-toxic.
J-b Weld 40005 Epoxy Putty Kit Protective Coating PC-11 Marine Grade Epoxy Adhesive Eclectic Amazing Goop Supermend Epoxy Paste
Hand mixable putty formulated to repair and rebuild wood quickly and easily. Adds structural strength to areas of damaged or rotted wood. Can be used to fill, build, reinforce or bond wood surfaces. After mixing, it forms a polymer compound that cures to the same density as wood. May be used for exterior or interior applications. Contains no solvents. will not rot, shrink, crack or pull away. Can be sanded, tapped, machined, dripped, filed and painted. Contains 6 oz tub Part A, 6 oz Part B, plastic spreader and pair protective gloves. Cures wet, dry or underwater. Use as an adhesive with wood, metals, glass, brick, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, gas liners, pressure tanks, plumbing, swimming pools, cellars, drains, underwater lights and stock tanks; filler for holes, castings, patterns, molds, voids and welds. Normally no vice or clamp needed. 30-40 minute working time at 70 degrees Fahrenheit. 90 minutes tack free, overnight for service, 1-2 weeks for max cure time. Nonconductive, -20 to 200 degrees Fahrenheit temperature range. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. 1,710 psi tensile shear strength. 72 hardness shore D after 1 week of curing. Fills holes and cracks to any size or depth. Use to treat dry rot areas and repair gutters, steps, sundecks, porches, concrete floors and walls, tanks, window sills, garden pools, fuel tanks, cracked toilets and basins. 15 minutes work time. Bonds permanently to metal, plastic, wood, tile, concrete, etc. Impervious to gas, oil, brine and alkaline cleaners. Remains flexible and can be sawed, drilled, tapped, sanded, and painted.
J-b Weld 8265 Cold Welding Compound Display Flow-Mix VersaChem Cold Weld Epoxy Elmer's E1009 Super Fast Epoxy Cement
Bonds, fills and repairs aluminum, brass, bronze, ceramic, copper, iron, pewter, plastic, porcelain, steel and wood. For automotive, industrial, households, hobbies, farm machinery and equipment. Drying time 4 to 6 hours before handling. Not affected by gas, oil or water. One tube contains a mixture of fine steel in a liquid base. The second tube contains a hardening compound. Display includes six pair tubes, each pair wrapped with instructions. 1 Oz each. Rapid-curing epoxy. Works best on steel, copper, aluminum, bronze, metal and iron. Flow-Mix nozzle allows for self-mixing and no mess. Sandable and paintable. 1,500 psi. Start setting up in 5 minutes. For indoor or outdoor applications where you need a fast, rigid bond. Perfect for use on most plastics, woods and metals. Two-part formula with hardener provides a fast 5 minute set time that reaches full strength between 12-24 hours. For a tighter bond use in conjunction with SKU# 060.7515.
Wagner 651 G-Thread Extension Wand For Use With Spray Guns Wagner 316-505 High Pressure Hose Wagner 0521424 Hose Cover
Light weight, easy to handle. Rental. Suitable for airless equipment up to 3300 PSI.1/4" x 50' Hose. Rental. Protects your airless hose from paint and abrasion damage. Comes in 1000' roll with perforations each 50'. Rental.
   
 
1