Home > PAINT & SUNDRIES > SUNDRIES > CONCRETE/MORTAR/SAND MIXES > CONCRETE MIXES
Sort By:
1
Encore 2115 Paint Tray Liner Linzer RM410 Paint Tray Liner Encore Deepwell Paint Tray Liner
Solvent resistant polyethylene. Fits universal metal paint trays. Solvent resistant. 9" Length Made from recycled plastic, solvent resistant, exact sizing prevents liner slippage, liners are disposable for fast cleanup. Fits sku# 960.1279
Wooster R406-11 Deluxe Paint Tray Liner Wooster R408-13 Deepwell Hefty Paint Tray Liner Linzer RF200-3 4-Wire Cage Roller Frame
One quart capacity. Form-fitting. Made of clear solvent-resistant PET (a recycled plastic). Use with SKU# 762.3747 Form-fitting. Made of clear solvent-resistant PET (a recycled plastic). Use with SKU# 664.0742. Plated 1/4" rod, threaded plastic grip.
Mintcraft CFA4641-11 Paint Roller Frames Zinsser Roll-A-Tex Sand Texture Additive Linzer A8102 Paint Roller And Tray Sets
6 mm rod diameter. Threaded grip. Used to produce a non-skid surface around pools, decks, steps and ramps, or for achieving a sand-texture effect on walls and ceilings. May be mixed with latex, oil, or acrylic paints. Provides a non-slip surface. 3" mini-roller and plastic frame, 3" mini-tray included.
Encore 2150 Jumbo Paint Tray Liner Wooster F0010-4 5-Wire Cage Roller Frame Foampro 97 Paint Roller And Tray Sets
Solvent resistant. Fits Wooster R405 (SKU# 664.0742) metal tray. 5-wire cage, 5/16" chrome plated shank. For small jobs and touch-ups. For all paints (latex, acrylic, and alkyd). For smooth and semi-smooth surfaces. Includes 3" roller and tray.
Shur-Line 03000 Trim Roller And Tray Sets Zinsser Skid Tex Non-Skid Texture Additive Wooster R138-3 Zip Trim Roller And Tray Sets
For small areas, craft projects or touch-ups. Woven cover for smooth to semi-smooth surfaces. Kit includes plastic roller frame, cover, and the plastic blister on the package doubles as the paint tray. An exclusive, non-skid compound, specially-formulated for easy mixing and application in all types of floor paints. Gives a durable non-skid safety coating to all types of interior and exterior surfaces. Applies with a paint roller or brush as easy as if applying regular paint. Helps prevent slips and falls. For use with washrooms, floors, patios, marine use, pool decks, stairways, ramps, ladders, and walkways. SKID TEX will not change the color or the performance properties of the paint. One pound is needed per gallon of paint. Compact, shed-resistant roller for all latex or oil-based paint, stain, varnish, and adhesive. Package converts to a ready-to-use tray. Plastic handle.
Foampro 93 Paint Roller And Tray Sets Zinsser Roll-A-Tex Texture Additive Zinsser Roll-A-Tex Texture Additive
For trim work, small projects and touch-ups. For all paints, stains and clear finishes. For smooth and semi-smooth surfaces. Produces a durable and even-flowing texture. Permanently fills and covers cracks and flaws. Eliminates the need for tedious and time-consuming crack repair. Applies to any surface, old or new. Can be used on stucco, plaster, brick, drywall, concrete, cinder block, wood and roofs. Texturing additive to any type and color of paint. Produces a durable and even-flowing texture. Permanently fills and covers cracks and flaws. Eliminates the need for tedious and time-consuming crack repair. Applies to any surface, old or new. Can be used on stucco, plaster, brick, drywall, concrete, cinder block, wood and roofs. Texturing additive to any type and color of paint.
Zinsser Roll-A-Tex Texture Additive PAINT BUCKET TRAY LINER 14IN  Quikrete 1103-10 Sand/Topping Mix
Produces a durable and even-flowing texture. Permanently fills and covers cracks and flaws. Eliminates the need for tedious and time-consuming crack repair. Applies to any surface, old or new. Can be used on stucco, plaster, brick, drywall, concrete, cinder block, wood and roofs. Texturing additive to any type and color of paint. Provides instant cleanup, use with all paints and epoxies. Rigid and form-fitting, resists cracking. Made of clear, solvent-resistant PET, a recycled plastic. Use with Orgill SKU# 378.1051. Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
Zinsser 76084 Popcorn Ceiling Patch Linzer RS300 Project Select Paint Roller And Tray Sets Linzer 7938 Threaded Grip Paint Splatter Guard
Used to repair damage on rough acoustic spray ceilings. Contains aggregates similar in size to rough acoustic spray. Duplicates the color of acoustic spray material making repair invisible. For all paints & stains. Use to paint or stain trim, small area projects and line striping. Moisture and solvent resistant core. Includes 3/8" nap cover on cage frame and plastic tray. Blue plastic shield with threaded grip No 7000, with RR938 cover. Use with all paints, pile 3/8".
FoamPRO 32 Double Foam Paint Roller Shur-Line 3955120 Trim Roller And Tray Sets Linzer RS400 Project Select Paint Roller And Tray Sets
Paints 2 sides at once. For wrought iron, wood spindles, pipe and railings. For all paints (latex, acrylic, alkyd). For touch-ups and small projects. Includes 3" trim and touch-up roller, trim and touch up pad, (2) roller refills, pad refill and trim tray. For all paints & stains. Use to paint or stain trim, small area projects and line striping. Moisture and solvent resistant core. Includes 3/8" nap cover on cage frame and plastic tray.
Homax 5225-06 Ceiling Texture Bondo/Dynatron 20126 Liquid Hardener FoamPRO 404 Double High Capacity Mini Roller
One-minute fix for acoustic ceilings. Comes in a no-mess squeeze tube with an EZ Dab applicator tip for stained, scraped or damaged ceilings. For blending and dabbing on surfaces to get seamless and professional results. Repairs acoustic texture damaged by water stains, scrapes, wall patches and replaced fixtures. Covers up to 1 sq. ft. Use with SKU# 218.6757 All Purpose Fiberglass Resin. Provides a lint-free and uniform finish. For smooth, semi-smooth and semi-rough surfaces. Eliminates roller skips & "holidays". For all paints (latex, acrylic, alkyd). Threaded grip handle for extension pole use.
Linzer 9383 Deluxe Roller and Frame Set Wooster R017-4 Roller Frame Shur-Line 3942 Trim Roller And Tray Sets
Includes one 9" No.RF 200 roller frame and three 9" x 3/8" nap roller covers. 4-wire cage roller frame with plated 1/4" rod and threaded plastic grip; deluxe, heavy-duty roller covers for all paints. Quick-release spring prevents roller slippage, yet allows easy, one-rap removal. Smooth-rolling internal bearings eliminate shank wear and gray streaks. Durable, green fiberglass-reinforced nylon cage and endcaps. Chrome-plated 5/16" shank, 90-degree angle. Full-size polypropylene grip with reinforced threads, Sherlock GT Compatible. Includes a roller frame, black paint tray, and two premium high-density 4" knit trim roller covers, low lint, 3/8 Inch nap, semi-smooth surfaces (wall/ceiling).
Bondo/Dynatron 20129 Fiberglass Mat FoamPRO Perfect Balance Roller Set Wooster RR394-4 Super Trim Roller And Tray Sets
Use where a reinforced repair is required. Repairs pool cracks, and tears in fiberglass. Automotive: Will not rot or rust.; Marine: Use with Bondo fiberglass repair kit to repair tubs, showers, cars, boats, trucks and RV. Center balanced for smooth, even application. Reduces hand and arm fatigue. Universal design fits 9" fabric and foam roller covers. Threaded grip handle for extension pole use. Includes 3/8" nap cover, R189 Super Trimmer for all latex or oil-based paint, primer, stain or varnish. Lightweight, durable paint tray made of solvent-resistant PET, 1/2 quart capacity. 4-inch size for house siding, wall or ceiling edging & small objects.
Damtite 08032/08031 Anchoring Cement Homax 4091-06 Wall Texture Homax 4060-06 Wall Texture
Portland cement based sets bolt, hooks, hand railing, fence posts, mailbox post, wood, metal, plastic or other fixtures into concrete or masonry. Fast setting, high strength, non-shrinking and weatherproof. One pound fills 18 cubic inches, 1/4" thick. Sets in 15-20 minutes. Fast and easy way to patch orange peel and splatter wall textures with the advantage of low odor and water cleanup. Adjustable spray patterns (fine, medium, and heavy). Low odor. Specially formulated for fast and easy patching of knockdown wall textures. Once applied, texture is knocked down using a drywall knife. Low odor formula. 20 oz. can covers 60 sq. ft.
Homax 4050-06 Dial-In Nozzle Easy Touch Orange Peel Wall Texture Shur-Line Twist 'N Reach Paint Roller Frame Cut Case FRAME FLEXI 9 IN
Fast and easy way to patch orange peel wall textures. Optional control of spray patterns (fine, medium, and heavy). Dries fast in 5-minutes, paintable in 30 minutes. Should be up to 110 sq. ft. coverage for one 20 oz. can. Includes a replaceable 9" roller cover with a 3/8" nap for smooth surfaces. For flooring, walls & ceilings. Designed for DIY and Pro. Uniform pressure on both sides of the frame/uniform paint release.  Prevents roller cover from walking off. Lint free.
Homax 4070-06 Easy Touch Ceiling Texture Tele-Roller 85 Paint Roller With Extended Handle Quikrete 1150-47 Jointing Sand 50 lb
Matches commercially applied popcorn ceiling textures.  Contains polystyrene chips. Covers up to 2 sq. ft. Steel handle locks in place with Twist-Lok locking device. Includes a replaceable 9" medium nap roller cover. A polymer-modified graded sand for filling between interlocking pavers, brick, patio blocks and concrete slabs. Once swept into pavers joints and dampened with water it hardens, locking pavers into place. Designed to resist weed growth and insects, erosion, non-staining, use for installation of pavers or replacing existing joints. Coverage area 50-55 square feet tumbled pavers. 85-90 square feet regular pavers.
Homax 4094 Ceiling Texture Homax 4067-06 Ceiling Texture Homax 8522 Wall/Ceiling Texture
Use to patch and repair stained or damaged popcorn ceilings. Covers 4 sq. ft. Formulated for patching existing interior drywall textures, or for adding new texture to walls and ceilings. Covers up to 80 sq. ft. depending upon texture. Bottle snaps directly onto any Homax spray texture gun. Bottle also acts as guns hopper. Wall or popcorn ceiling variety. Textures are water-based and clean up easily with water.
Hartline 10010 Rockite Anchoring Patching Cement Homax 4055-06 Easy Touch Wall Texture Homax 4092-06 Wall Texture
Expandable, fast setting, anchoring and patching cement. Use for anchoring railings, machinery, etc. and for patching holes and cracks in concrete. Fast and easy way to patch orange peel wall textures. Optional control of spray patterns (fine, medium, and heavy). Dries fast in 5-minutes, paintable in 30 minutes. Should be up to 110 sq. ft. coverage for one 20 oz. can. Fast and easy way to patch orange peel and splatter wall textures with the advantage of low odor and water cleanup. Adjustable spray patterns (fine, medium, and heavy). Low odor.
Homax 4065-06 Wall Texture US Gypsum 540795060 USG Sheetrock Ceiling Texture Bondo/Dynatron 20122 Fiberglass Resin
Specially formulated for fast and easy patching of knockdown wall textures. Once applied, texture is knocked down using a drywall knife. Low odor formula. 20 oz. can covers 60 sq. ft. For bold acoustical appearance on interior ceilings. Massive aggregate with white background. Exceptional hide and leveling qualities. Mixed with water at jobsite, requires no extended soaking or mixing, even in cold water. Bonds to new or old concrete, gypsum panels and plaster; levels minor surface irregularities, masks surface defects, and has superior resistance to fissure-cracking in normal thicknesses. Dries to a crisp white finish. Paintable, not washable unpainted. Fast pumping, low-cost spray application. Dries to touch in 1 to 2 hours. Covers up to 8-10 sq. ft. per pound. Makes watertight durable repairs to small and large gaps, holes, cracks, splits, gouges, or seams in poles, sheds and play equipment. Use on fiberglass, metal or concrete structures. Use with SKU# 2505428.
Quikrete 1245-20 Anchoring Cement Homax 4555 Wall Texture Homax 4592 Wall Texture
Pourable, used for setting bolts, handrails, or anchoring anything metal in concrete, and for repairing loose wrought iron railings. Activated with water, expands as it hardens. Develops strength greater than concrete. Sets in 15 to 30 minutes. Use to patch and repair textured walls. Delivers an Invisible Repair. Adjustable spray tip and pressure for improved control. Ready to paint in 5 min. Covers up to 125 sq ft. No prime formula. Use to patch and repair textured walls. Delivers an Invisible Repair. Adjustable spray tip and pressure for improved control. Ready to paint in 30 min. Covers up to 125 sq ft. No prime formula.
Homax 4565 Wall Texture Homax 6100 Ceiling Texture Scraper Quikrete 110110 Concrete Mix
Use to repair knockdown textured walls. Delivers an Invisible Repair. Adjustable spray tip and pressure for improved control. Covers up to 75 sq ft. No prime formula. Removes unwanted or damaged "popcorn" or "cottage cheese" type ceiling texture without the mess. Works with plastic trash bag and threaded extension handle. Extension handle and plastic bags not included. For general concrete work, setting posts, or building sidewalks, steps, patios, downspout troughs, floors, and curbs. Activated with water. 4,000 psi average compressive strength.
HEAT GUN DUALTEMP KIT W/ACC   Homax 4505P Pro Hopper Hopper Damtite 08122/08121 Anchoring Cement
For stripping paint and varnish, softening caulk and putty for removal, removing adhesive labels. Thawing pipes, gutters, freezers, or radiators. Loosening rusted nuts and bolts. Speed-drying epoxy, cement, or any damp surface, and more. ETL Listed. Includes: (2) Deflector Nozzles, (1) Reflector Nozzle and (1) Air Reduction Nozzle. Air reduction nozzle concentrates heat. Deflector nozzles protect glass and other surfaces. Reflector nozzle speeds thawing of pipes. 3-position rocker type switch for high temp, off and low temp. Rated Voltage: 120V AC, 60HZ. Rated Input Power: 12.5 Amp. Output: 750/1500 Watts. Air Temperature: 572 /1000-degrees F. Air Volume: 10/17 cu. Ft. per min. Use to mix your own wall or ceiling texture. Attaches directly onto texture gun. Comes with a wide mouth screw-on lid to prevent spillage when filling and can be reattached for storing texture. Use with Homax manual and pneumatic guns. Portland cement based sets bolt, hooks, hand railing, fence posts, mailbox post, wood, metal, plastic or other fixtures into concrete or masonry. Fast setting, high strength, non-shrinking and weatherproof. One pound fills 18 cubic inches, 1/4" thick. Sets in 15-20 minutes.
US Gypsum 545341 USG Sheetrock Wall/Ceiling Spray Texture US Gypsum 540901 USG Sheetrock - Tuf-Tex Wall/Ceiling Spray Texture CEILING TEXTURE SPRY FINE 40LB
An unaggregated texture coating designed for spray application over properly prepared interior wall and ceiling surfaces. Produces a variety of texture patterns from bold spatter/knockdown to light orange peel. Dries to a hard, white finish. Helps conceal minor substrate defects. Not intended as a final coating-should be overpainted when dry. May be painted after overnight drying. Not washable unpainted. An unaggregated durable texture coating designed for application over properly prepared interior wall and ceiling surfaces. Produces a variety of texture patterns from bold spatter/knockdown to light orange peel. Dries to a hard, white finish. Helps conceal minor substrate defects. Not intended as a final coating-should be overpainted after overnight drying. Not washable unpainted. Spray, brush, or roller application to create the desired effect. For bold acoustical appearance on interior ceilings. Massive aggregate with white background. Exceptional hide and leveling qualities. Mixed with water at jobsite, requires no extended soaking or mixing, even in cold water. Bonds to new or old concrete, gypsum panels and plaster; levels minor surface irregularities, masks surface defects, and has superior resistance to fissure-cracking in normal thicknesses. Dries to a crisp white finish. Paintable, not washable unpainted. Fast pumping, low-cost spray application. Dries to touch in 1 to 2 hours. Covers up to 8-10 sq. ft. per pound.
CEILING TEXTURE COARSE 40LB   Homax 4121 Texture Touch-Up Kits HEAT GUN 300 DUAL TEMPERATURE
For bold acoustical appearance on interior ceilings. Massive aggregate with white background. Exceptional hide and leveling qualities. Mixed with water at jobsite, requires no extended soaking or mixing, even in cold water. Bonds to new or old concrete, gypsum panels and plaster; levels minor surface irregularities, masks surface defects, and has superior resistance to fissure-cracking in normal thicknesses. Dries to a crisp white finish. Paintable, not washable unpainted. Fast pumping, low-cost spray application. Dries to touch in 1 to 2 hours. Covers up to 8-10 sq. ft. per pound. For small repairs to damaged textured walls and ceilings. Sprayer adjusts to disperse a variety of interior texture patterns including orange peel, splatter and knockdown and popcorn ceiling texture. Wall texture covers up to 15 sq. ft. Ceiling acoustic covers up to 2 sq. ft. Includes hand-operated texture touch-up sprayer, 9.2 oz wall and ceiling texture dry mix, two 4.2 popcorn texture dry mix, knockdown knife and stir stick. Ideal for removing paint and flooring, bending plastic, and thawing pipes. It has two temperature settings, 750F and 1100F, that are suitable for a majority of heating applications. 1200 watts/4100 BTUS. Ergonomic design for comfort and balance to reduce fatigue. Side bars prevent the hot nozzle from touching the work surface. Integrated stand for safe hands-free operation. Hanging loop for safe storage during cool-down.
Sika 212 Non-Shrink Cement/Structural Grout Hyde Tools 45820 Corner Ease Paint Roller Cover/Frame Sets Hartline 10001 Rockite Anchoring Patching Cement
For structural grouting of columns, posts, railings, bolts, anchor rods, fences, etc. Flowable formula for easy placement. High strength. Meets Specification CRD C-621 and ASTM C-1107 (Grade C). Designed for professional use, can be used with water-based, oil or enamel paints, stains, drywall compound, and cleaning fluids. The roller contains a V-shaped hub that directs the paint into corners or tight grooves. Use on lap siding, T1-11, crown molding, cinderblock, and other textured or irregular surfaces not easily painted with a standard roller. 100-percent Lambswool. The Acme threaded handle will fit any standard extension pole. Expandable, fast setting, anchoring and patching cement. Use for anchoring railings, machinery, etc. and for patching holes and cracks in concrete.
Hartline 10025 Rockite Anchoring Patching Cement Hartline 10005 Rockite Anchoring Patching Cement Quikrete 1245-11 Anchoring Cement
Expandable, fast setting, anchoring and patching cement. Use for anchoring railings, machinery, etc. and for patching holes and cracks in concrete. Expandable, fast setting, anchoring and patching cement. Use for anchoring railings, machinery, etc. and for patching holes and cracks in concrete. Pourable, used for setting bolts, handrails, or anchoring anything metal in concrete, and for repairing loose wrought iron railings. Activated with water, expands as it hardens. Develops strength greater than concrete. Sets in 15 to 30 minutes.
HEAT GUN 500 LED VARIABLE TEMP Porter-Cable PC1500HG Heat Guns LINER TRAY 11IN W/BRUSH REST
Versatile tool that can be used for removing paint, drying spackle, thawing pipes, and removing vinyl decals. Has 12 temperature settings that range from 150F to 1200F. This multi-setting tool allows the user to set the temperature for a particular project. Includes graphic LED screen with push-button controls, 2 fan settings plus cool down mode, and durable ceramic element. Ergonomic design for comfort and balance to reduce fatigue. Side bars prevent the hot nozzle from touching the work surface. Integrated stand for safe hands-free operation. Soft-grip handle for comfort. 1500 watts/5100 BTUS. Hanging loop for storage. Variable temperature dial allows for easy adjustment of temperatures. Integrated support stand allows the gun to sit upright for hands free use. Use integrated hanging hook for storage. 1500 watts deliver high heat and multiple fan settings. 6ft high grade cord improves flexibility during cold use. Weighs 2 lbs. Use with SKU #3532520 Encore #200131 tray. Solvent resistant.
Black And Decker HG1300 Heat Guns Homax 4205 Spray Texture Gun Encore 2110 Paint Tray Liner
Two heat settings for a variety of application. Lightweight and easy to use one handed. Built-in stand for easy cool-down. Specs: 120-watt, 750 to 1000 degrees Fahrenheit air temperature. 8.8 to 12 CFM air flow. Double insulated, U.L. Listed. 6' cord. Used when mixing and spraying texture materials. Features polycarbonate body with brass inserts for easy disassembly. Portable, require no power source to operate and quickly adjust to spray a wide variety of texture patterns. Use for multiple patch and repair work. Easy clean-up. Solvent resistant. Disposable for fast clean-up. Exact sizing prevents liner slipping in metal tray. Fits 11" Wooster tray R402 (SKU# 762.3747) metal tray and Encore 200259 (SKU# 353.2512).
Foampro 98 Paint Roller And Tray Sets Hartline 10051 Rockite Anchoring Patching Cement Bercom 7510CC Handy Paint Tray Liner
For small areas and touch ups. Includes 3"roller and tray. Expandable, fast setting, anchoring and patching cement. Use for anchoring railings, machinery, etc. and for patching holes and cracks in concrete. Makes color change and clean up fast and easy. 3 custom-fit liners per pack. Use with SKU# 118.1569.
HEAT GUN 700 LCD VARIABLE TEMP Homax 8322 Wall/Ceiling Texture Shur-Line 50090ZS Deepwell Paint Tray Liner
The broad temperature range makes it ideal for a variety of projects, such as softening putty and caulk, stripping paint, and thawing frozen pipes. 117 temperature settings range from 125F to 1300F. 5 fan speeds plus cool-down setting. 1500 Watts/5100 BTUs. Durable Ceramic Element. LCD Display screen with push-button controls. Ergonomic Design for comfort and balance to reduce fatigue. Side Bars prevent the hot nozzle from touching the work surface. Integrated Stand for safe hands-free operation. Soft-Grip Handle for comfort. Hanging Loop for storage. Includes 2 nozzles & a 5-in-1 painter?s tool. Bottle snaps directly onto any Homax spray texture gun. Bottle also acts as guns hopper. Wall or popcorn ceiling variety. Textures are water-based and clean up easily with water. Designed for fit inside Orgill SKU# 553.6362. Ideal for paint projects large and small. Deep well holds more paint resulting in fewer refills. Engineered to fit securely on most ladders and designed with a built-in brush rest. For use with 7 inch to 9.5 inch rollers. Clear material.
Wooster RR395-3 Deluxe Trim Roller And Tray Sets Dewalt D26950 Heat Guns Encore 75 Deepwell Paint Tray Liner
For closets, doors, trim, and edging. Includes 3/8" nap R105 Deluxe 3" Trim Roller for all latex or oil-based paint, stain, and varnish, lightweight, durable paint tray made of solvent-resistant PET. 1/2 quart capacity. Built-in overload protection shuts the heating element down and prevents burn up. Built-in hang ring adds a storage feature. Built-in kickstand support provides greater stability and prevents tip over. Cord protector keeps the cord from tearing away from the housing. Ergonomic comfort grip. Separate internal components allows maintenance on both the motor and heating element. Specs: 1550 Watts, 120 Volts, 13 Amps, 120 to 1100-degrees fahrenheit, 16CFM and 10 Ft power cord. Includes cone nozzle and Fishtail surface nozzle. Fits tray SKU# 754.9058. Black.
Homax 4096-06-06 Wall Texture Encore Paint Tray Liner Milwaukee 8975-6 Heat Guns
Goes on blue for high visibility and pattern reproduction. Dries white when ready to paint. Water-based orange peel formula. Matches multiple patterns. Low odor. Adjustable nozzle applies fine to heavy textures. Dries in 30 minutes. Covers 90 sq. ft. Standard fits universal metal trays. Made from recycled plastic, solvent resistant, exact sizing prevents liner slippage, liners are disposable for faster clean up. Offers ergonomic style and impact resistant heating element. Soft air velocity increases surface temperature. Stay cool handles and heat shields. Three position rocker switch- off, high and low. Specs: 120-Volt AC, 11.6 amp motor, 570 to 1000-degrees fahrenheit air temperature, 14.8 cu. ft. min. air volume, 10-1/8" tool length. 1.6 lbs. tool weight.
MIX FENCE POST 33OZ           Royal 254-9.4-S Fast 2K Fence Post Backfill HEAT GUN COMPACT
MIX FENCE POST 33OZ
Our Price: $116.50
HEAT GUN COMPACT
Our Price: $129.11
Two component, pre-proportioned polyurethane resin. It mixes right in the bag to produce expanding foam for supporting and backfilling fence, mail box, gate and signage posts. One pouch replaces two 50 lb. bags of concrete mix. Sets in as fast as 3 minutes with no water or special tools required. NOT FOR STRUCTURAL POSTS. For setting fence posts, mail boxes, signs and more. Sets a 4 x 4 post. No water required. Mixes in 30 seconds. Expands to set posts. Same technology used to set utility poles. Helps to protect the post against rotting. Can be used during winter. Powered by REDLITHIUM battery technology, it is able to heat over 40 connections on a single XC5.0 battery. Features: High Performance Heating Coil: Reach operational temperature in 7 seconds; REDLINK Intelligence: Temperature management system provides maximum life; Compatible with all M18 REDLITHIUM Battery Packs; 6.4? long; Guarded Nozzle: Increased protection for work surfaces; Ladder Hook: Easily hang between applications; LED Light.
Royal 254-20-S Fast 2K Fence Post Backfill Quikrete 1151-50 All Purpose Gravel Quikrete 1152-53 All Purpose Sand 50 lb
For setting fence posts, mail boxes, signs and more. Sets a 4 x 4 post. No water required. Mixes in 30 seconds. Expands to set posts. Same technology used to set utility poles. Helps to protect the post against rotting. Can be used during winter. Multi-use product for a variety of decorative and landscaping applications, gardening, patios, tree wells, walks, rooftops, fish ponds, and aquariums. Maybe used as an extension to stucco wallcoating. Mix with Portland Cement SKU#332.9414 and All-Purpose Sand to make concrete. A washed properly graded sand used for underlayment for brick pavers, mixed to make concrete, traction for snow and ice, can be mixed with potting soil. Meets ATM C 33 specifications.
Quikrete 1103-40 Sand (Topping) Mix Quikrete 1113-51 Play Sand Quikrete 1101-60 Concrete Mix
Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks. Use for children's sand boxes, molding and building. Specially grades washed sand that has been dried and screened. Fills approximately 1/2 cubic feet. For general concrete work, setting posts, or building sidewalks, steps, patios, downspout troughs, floors, and curbs. Activated with water. 4,000 psi average compressive strength.
Quikrete 1101-40 Concrete Mix Quikrete 1006-67 Concrete Mix Quikrete 1103-60 Sand (Topping) Mix
For general concrete work, setting posts, or building sidewalks, steps, patios, downspout troughs, floors, and curbs. Activated with water. 4,000 psi average compressive strength. A blend of portland cement, sand, gravel, and special reinforcing fibers to reduce shrinkage cracks and improve impact resistance. Just add water. Use for walkways, patios, steps, garage\shed floors. Blend of portland cement and graded sand for pouring overlays less than 2" thick, patching and topping chipped concrete surfaces or laying flagstone and paving bricks.
Quikrete 1004-50 Fast Setting Concrete Mix
Blend of fast-setting cements, sand and gravel. Designed to set hard in approximately 20-40 minutes. Sets posts without mixing. For setting fence posts, mailbox posts, lamp posts and swing sets. For building steps, sidewalks and air conditioner pads.
   
 
1