Home > PAINT & SUNDRIES > PAINT > INTERIOR STAINS & FINISHES > SPECIALTY FINISHES
Choose a sub category:
MARKING PAINT MARKING PAINT SWIMMING POOL/WATERPROOF PAIN
SWIMMING POOL/WATERPROOF PAIN MILDEW & INSECT ADDITIVES MILDEW & INSECT ADDITIVES
AIR FRESHENING ADDITIVES AIR FRESHENING ADDITIVES ANTI-SKID ADDITIVE
ANTI-SKID ADDITIVE RUBBERIZED PLASTIC COATING RUBBERIZED PLASTIC COATING
MILDEW PROOF PAINTS MILDEW PROOF PAINTS PAINT PENS
PAINT PENS MISC SPECIALTY PAINT PRODUCTS MISC SPECIALTY PAINT PRODUCTS
CABINET REFINISHING CABINET REFINISHING COUNTERTOP REFINISHING
COUNTERTOP REFINISHING
Sort By:
1
Duckback SC0063102 Anti-Skid Sand Texture Additive Epoxy Shield 279847 Anti-Skid Paint Additive Savogran 10501 Wood Bleach
Provides a slip resistant surface to stairs, ramps, boat docks, walkways, poolsides and other surfaces. Made from 100-percent ground walnut shells. Mix with the final coat of product. Add to paint and coatings. 40/60 grit. Meets ADA standards when used with Deck & Dock Elastomeric Coating. Creates a slip-resistant surface. Made from aluminum oxide. Diamond hard finish for maximum abrasion resistance. Barefoot-grade texture. Fine, uniform texture. Can be used with EpoxyShield decorative color chips. Meets americans with disabilities act requirements for slip-resistant surfaces. Mix with one gallon of epoxy, latex or oil-based paints or stains. Use with hot water to bleach unfinished or stripped wood quickly and easily. Use on all unfinished woodwork, floors, doors and etc. to lighten wood or match different wood colors. Use to remove black water spots and tannin stains in wood. Can be used to remove rust stains on stucco & wood caused by irrigation systems.
Valspar 82795 Anti-Skid Floor Texture Additive Rustoleum 66051H Watco Rejuvenating Oil Minwax 47000000 Antique Oil Finish
Use to mix with a gallon sealer, floor paint or epoxy to enhance traction or create a skid resistant surface on concrete, wood, metal or fiberglass surfaces. Use on furniture, trim, paneling, or any interior oil-finished wood surface. Cleans, penetrates and rejuvenates previously oil-finished wood surfaces. Apply with steel wool to remove minor scratches and stains. Rub on and wipe off in 10 minutes. Fast, easy way to get a hand-rubbed look. Provides a hard finish with satin soft lustre that resists heat and stains. Use on furniture, antiques, woodwork, cabinets, doors, paneling, and accessories. Approximate coverage 125 -150 sq. ft. per quart.
FINISH HARDENER WB PART B 4OZ Minwax 67000000 Antique Oil Finish Famowood 5050060 Glaze Epoxy Coating
For added protection, chemical resistance and superior durability. For use with Masters Armor only. Provides maximum protection on high traffic floors, bar or table tops. Fast, easy way to get a hand-rubbed look. Provides a hard finish with satin soft lustre that resists heat and stains. Use on furniture, antiques, woodwork, cabinets, doors, paneling, and accessories. Approximate coverage 125 -150 sq. ft. per quart. Pour-on epoxy coating. One coat equals 70 coats of varnish. Used for home improvement and craft projects. Coat tables, clocks, game boards and furniture. Imbeds coins, rocks, seashells, flowers or any non-waxy material. Preserves pictures, photographs, posters, signs and ceramics. Pint covers 4.5 sq. ft., quart covers 9 sq. ft. and a gallon covers 36 sq. ft.
Cabot 1806 Solid Color Decking Stain Cabot 1800 Solid Color Decking Stain Cabot 1808 Solid Color Decking Stain
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 1800 Solid Color Decking Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain Famowood 5050080 Glaze Epoxy Coating
For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. Pour-on epoxy coating. One coat equals 70 coats of varnish. Used for home improvement and craft projects. Coat tables, clocks, game boards and furniture. Imbeds coins, rocks, seashells, flowers or any non-waxy material. Preserves pictures, photographs, posters, signs and ceramics. Pint covers 4.5 sq. ft., quart covers 9 sq. ft. and a gallon covers 36 sq. ft.
STAIN WD ACRY SEMI-TRNS CDR 1G STAIN WD ACRY SEMI-TRNS RWD 1G STAIN WD SEMI-TRNS RSST BRN 1G
For decks, fences and siding. Provides water repellency. For decks, fences and siding. Provides water repellency. For decks, fences and siding. Provides water repellency.
STAIN WD ACRY SEMI-TRNS GRY 1G STAIN WD ACRY SLD-CLR CEDR GAL STAIN WOOD ACRY SLD-CLR RDWD G
For decks, fences and siding. Provides water repellency. For decks, fences and siding. Provides water repellency. For decks, fences and siding. Provides water repellency.
STAIN WD ACR SLD-CLR RSST-BR G STAIN WD ACRY SLD-CLR GRAY GAL Zinsser 260539 Swimming Pool Paint
For decks, fences and siding. Provides water repellency. For decks, fences and siding. Provides water repellency. Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces.
Zinsser 260538 Swimming Pool Paint M-1 AM1.5B Advanced Mildew Treatment Valspar 7260-01 All Purpose Latex Stain
Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces. Resists buildup of mildew, mold and algae on dry film. Protects against microbial defacement. Minimizes discoloration. For use in interior/exterior water-based and oil-based paints, stains, coating and adhesives. Low odor/low VOC. Resists blistering, peeling and cracking. Dries to a rich, uniform, low angular sheen. Can be applied over a damp surface. Heavily pigmented stain that provides a ``block-out" hide without concealing the wood texture. For concealing unwanted blemishes.
Rustoleum 287397 Restore Exterior Latex Stain STAIN SWF SLD DEEP BASE 1GAL  STAIN SWF SOLID DEEP BASE 5GAL
For use on wood decks, fences and exterior wood furniture. Features NeverWet properties inside, which provides hydrophobic water beading and superior water repellency to extend the life of your deck. Algae and mildew resistant coating. Ready for use in 48 hours. Covers up to 200 sq ft per gallon with one coat. The 100-percent Acrylic formulation provides excellent adhesion and durability and protects wood from moisture and sun damage while adding a rich, opaque color. Rain-free window requirement of only 12 hours which allows for more working days and faster job completion after product application.  Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces.  Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Application down to 35-degree F and as high as 120-degree F. Covers approximately 350 to 500 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood.  Warranted for 25 years on fences or siding and 10 years on decks. The 100-percent Acrylic formulation provides excellent adhesion and durability and protects wood from moisture and sun damage while adding a rich, opaque color. Rain-free window requirement of only 12 hours which allows for more working days and faster job completion after product application.  Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces.  Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Application down to 35-degree F and as high as 120-degree F. Covers approximately 350 to 500 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood.  Warranted for 25 years on fences or siding and 10 years on decks.
Mccloskey 14302 True Basics Exterior Acrylic Stain STAIN SEMI-TRANS LTX TINT BASE Mccloskey 14303 True Basics Exterior Acrylic Stain
Durable, fade resistant, waterproofing. VOC Compliant nationwide. Durable, fade resistant, waterproofing. VOC Compliant nationwide. Durable, fade resistant, waterproofing. VOC Compliant nationwide.
Mccloskey 14304 True Basics Exterior Acrylic Stain Mccloskey 14202 True Basics Exterior Acrylic Stain Mccloskey 14203 True Basics Exterior Acrylic Stain
Durable, fade resistant, waterproofing. VOC Compliant nationwide. Durable, fade resistant, waterproofing. VOC Compliant nationwide. Durable, fade resistant, waterproofing. VOC Compliant nationwide.
Mccloskey 14204 True Basics Exterior Acrylic Stain STAIN SOLID TINT BASE LATEX   M-1 AMCP Advanced Mildew Treatment
Durable, fade resistant, waterproofing. VOC Compliant nationwide. Durable, fade resistant, waterproofing. VOC Compliant nationwide. Resists buildup of mildew, mold and algae on dry film. Protects against microbial defacement. Minimizes discoloration. For use in interior/exterior water-based and oil-based paints, stains, coating and adhesives. Low odor/low VOC.
STAIN SWF SOLID PASTEL BSE GAL STAIN SWF SOLID WHT 100VOC5GAL Famowood 5050110 Glaze Epoxy Coating
The 100-percent Acrylic formulation provides excellent adhesion and durability and protects wood from moisture and sun damage while adding a rich, opaque color. Rain-free window requirement of only 12 hours which allows for more working days and faster job completion after product application.  Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces.  Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Application down to 35-degree F and as high as 120-degree F. Covers approximately 350 to 500 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood.  Warranted for 25 years on fences or siding and 10 years on decks. The 100-percent Acrylic formulation provides excellent adhesion and durability and protects wood from moisture and sun damage while adding a rich, opaque color. Rain-free window requirement of only 12 hours which allows for more working days and faster job completion after product application.  Recommended for use on any properly prepared exterior wood, including decks, fences, siding, railings, outdoor furniture and other wood surfaces.  Apply to new, dry, pressure-treated wood, uncoated new or weathered wood, or wood previously stained or painted. Application down to 35-degree F and as high as 120-degree F. Covers approximately 350 to 500 sq. ft per gallon. Coverage will vary depending on the type, age and texture of the wood.  Warranted for 25 years on fences or siding and 10 years on decks. Pour-on epoxy coating. One coat equals 70 coats of varnish. Used for home improvement and craft projects. Coat tables, clocks, game boards and furniture. Imbeds coins, rocks, seashells, flowers or any non-waxy material. Preserves pictures, photographs, posters, signs and ceramics. Pint covers 4.5 sq. ft., quart covers 9 sq. ft. and a gallon covers 36 sq. ft.
Zinsser 260540 Swimming Pool Paint Zinsser 260542 Swimming Pool Paint Superdeck 9600 Solid Color Stain
Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces. Ready-to-use, cement base formula for decorating and waterproofing interior or exterior concrete, gunite, masonry or plastered swimming pools and other concrete and masonry surfaces, above and below ground. Dries to touch in 4 to 6 hours. Apply second coat in a minimum of 24 hours after first coat. Covers approximately 75-100 sq. ft. per gallon on rough surfaces and up to 125-150 sq. ft. per gallon over smooth surfaces. Oil primer and acrylic latex top coat in one formula. Easy handling and sprayability with soap and water clean up. Use on all wood fences, decks siding and more. Good on chalky stucco and masonry surfaces. Resists peeling, fading, and scuffing. Last 5 years on decks and 15 years on siding. Covers 350-400 sq ft per gallon on new wood and 250-300 sq ft per gallon on weathered wood. MPI approved for product class #16 and #33.
Superdeck 9600 Solid Color Stain Superdeck 9600 Solid Color Stain Superdeck 9600 Solid Color Stain
Oil primer and acrylic latex top coat in one formula. Easy handling and sprayability with soap and water clean up. Use on all wood fences, decks siding and more. Good on chalky stucco and masonry surfaces. Resists peeling, fading, and scuffing. Last 5 years on decks and 15 years on siding. Covers 350-400 sq ft per gallon on new wood and 250-300 sq ft per gallon on weathered wood. MPI approved for product class #16 and #33. Oil primer and acrylic latex top coat in one formula. Easy handling and sprayability with soap and water clean up. Use on all wood fences, decks siding and more. Good on chalky stucco and masonry surfaces. Resists peeling, fading, and scuffing. Last 5 years on decks and 15 years on siding. Covers 350-400 sq ft per gallon on new wood and 250-300 sq ft per gallon on weathered wood. MPI approved for product class #16 and #33. Oil primer and acrylic latex top coat in one formula. Easy handling and sprayability with soap and water clean up. Use on all wood fences, decks siding and more. Good on chalky stucco and masonry surfaces. Resists peeling, fading, and scuffing. Last 5 years on decks and 15 years on siding. Covers 350-400 sq ft per gallon on new wood and 250-300 sq ft per gallon on weathered wood. MPI approved for product class #16 and #33.
M-1 AM7.5 Advanced Mildew Treatment Cabot 800 Self-Priming Solid Color Siding Stain STAIN SOLID CF KNGS CANYON GAL
Resists buildup of mildew, mold and algae on dry film. Protects against microbial defacement. Minimizes discoloration. For use in interior/exterior water-based and oil-based paints, stains, coating and adhesives. Low odor/low VOC. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating.
STAIN SOLID CF LODGE BROWN 1G STAIN SOLID CF PINE CONE GAL  STAIN SOLID CF CABIN BROWN GAL
Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating.
STAIN SOLID CF MONTREY TAN GAL STAIN SOLID CF CEDAR GALLON   STAIN SEMI SOLID CF HWTHRN GAL
Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating.
STAIN SEMI SOLID CF CDR BRK 1G STAIN SEMI SOLID CF CHSTNT 1G STAIN SEMI SOLID CF RVRWD GAL
Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating.
STAIN SEMI SOLID CF CHARWD GAL STAIN SEMI SLD CF BLUE SHDW 1G Cabot 1844 Exterior Acrylic Latex Stain
Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. Delivers a coating that helps reduce surface temperature making it cooler to walk on. Formulated to include pigments that reflect solar rays back into the atmosphere, this advanced technology helps reduce the exterior surface temperature of decks exposed to the constant assault of direct sunlight. Can be applied to damp wood. Contains agents that inhibit the growth of mildew on the surface of the coating. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 1300 Acrylic Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 1880 Exterior Acrylic Latex Stain
For all types of natural wood siding, shingles, decks, fences, roofs and log homes. Formulated to provide long-lasting, vapor-permeable protection. Beautifies and enriches wood surfaces. Contains a special acrylic resin. Water repellent and resistant to mildew and fungus growth. Formulated to weather slowly over time. Can be applied to new, unprimed fiber cement siding. Dries to a natural flat finish. Covers 100-300 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 1806 Solid Color Decking Stain
For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 1801 Solid Color Decking Stain Cabot 1300 Acrylic Stain Cabot 1800 Solid Color Decking Stain
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For all types of natural wood siding, shingles, decks, fences, roofs and log homes. Formulated to provide long-lasting, vapor-permeable protection. Beautifies and enriches wood surfaces. Contains a special acrylic resin. Water repellent and resistant to mildew and fungus growth. Formulated to weather slowly over time. Can be applied to new, unprimed fiber cement siding. Dries to a natural flat finish. Covers 100-300 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 1808 Solid Color Decking Stain
For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface.
Cabot 1800 Solid Color Acrylic Deck Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Cabot 1816 Exterior Acrylic Latex Stain Cabot 1837 Exterior Acrylic Latex Stain Cabot 800 Self-Priming Solid Color Siding Stain
For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For use on all wood decking, outdoor furniture and fencing, porches, steps, railings wood patios as well as cement and walkways. Long-lasting, water-repellent and fade resistant. Will resist scuffing, and oil and grease will wash off with mild detergent and water. For use on most types of lumber including redwood, cedar, cypress, pine, fir and pre-treated wood. Dries to a uniform, durable, low-lustre finish. Covers 400-500 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Cabot 1100 Siding and Fence Stain Cabot 1100 Siding and Fence Stain Cabot 800 Self-Priming Solid Color Siding Stain
For application on new or properly reconditioned wood, including siding, shingles, shakes, fences, roofs and log homes. Provide long-lasting, vapor permeable protection that beautifies and enriches exterior wood surfaces. For all types of natural wood siding and shingles. Water repellent and resistant to mildew and fungus growth. Formulated to weather slowly over time. Can also be applied to new, unprimed fiber cement siding. Dries to a natural, flat finish. On smooth surfaces, covers 200-300 sq. ft. per gallon; on rough surfaces, 100-200 sq. ft. per gallon. For application on new or properly reconditioned wood, including siding, shingles, shakes, fences, roofs and log homes. Provide long-lasting, vapor permeable protection that beautifies and enriches exterior wood surfaces. For all types of natural wood siding and shingles. Water repellent and resistant to mildew and fungus growth. Formulated to weather slowly over time. Can also be applied to new, unprimed fiber cement siding. Dries to a natural, flat finish. On smooth surfaces, covers 200-300 sq. ft. per gallon; on rough surfaces, 100-200 sq. ft. per gallon. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Cabot 1300 Acrylic Stain Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain
For all types of natural wood siding, shingles, decks, fences, roofs and log homes. Formulated to provide long-lasting, vapor-permeable protection. Beautifies and enriches wood surfaces. Contains a special acrylic resin. Water repellent and resistant to mildew and fungus growth. Formulated to weather slowly over time. Can be applied to new, unprimed fiber cement siding. Dries to a natural flat finish. Covers 100-300 sq. ft. per gallon. Rates vary upon the porosity and type of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface.
Cabot 800 Self-Priming Solid Color Siding Stain Cabot 800 Self-Priming Solid Color Siding Stain California Waterborne Chlorinated Rubber Swimming Pool Paint
For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. For siding, shingles and trim. Heavily pigmented and thick. Can be used in colder temperatures. Covers previously painted or stained surfaces. Does not require the use of a primer coat on non-extractive-prone wood. Fade-resistant and water-repellent. Apply on new or reconditioned wood siding and shingles, cement siding, manufactured hardboards, previously painted surfaces, aluminum and pre-primed ferrous metal, masonry, stucco and plywood panel siding. Dries to a natural, flat finish. Covers approximately 200-400 sq. ft. per gallon. Coverage depends upon the porosity of surface. Designed for maximum wear under water. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with chlorinated water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals.
California Waterborne Chlorinated Rubber Swimming Pool Paint California Waterborne Acrylic Swimming Pool Paint California Waterborne Acrylic Swimming Pool Paint
Designed for maximum wear under water. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with chlorinated water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals. Can be applied to mildly damp surfaces and over bare concrete and plaster. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with fresh or salt water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals. Designed for maximum wear under water. Can be applied to mildly damp surfaces and over bare concrete and plaster. For use on new and previously finished concrete, gunite, fiberglass, polyester, bituminous and aluminum swimming pools that are to be filled with fresh or salt water. The fully cured paint film resists algae, mildew, alkalis and pool chemicals. Designed for maximum wear under water.
   
 
1