Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS > WOOD PRESERVATIVES
Sort By:
1
Lomanco VPLUG Foam End Plug Thompsons TH.010501-18 Sports Seal Fabric Protector Thompsons TH.010502-18 Fabric Seal Fabric Protector
Tight-fitting, high-density foam end plug. To be used in conjunction with VUR ridge vents. Provides long-lasting, maximum strength waterproofing protection for outdoor sporting, camping, hunting, and boating surfaces. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface. Provides maximum strength waterproofing protection for fabric surfaces such as patio cushions, pillows and umbrellas. Contains UV inhibitors in order to resist color fading caused by the sun. Penetrates below the surface to protect against moisture damage without leaving surfaces discolored, stiff or sticky. Repels spills and stains. Allows fabric to breathe. Covers approximately 60 sq ft per can. Coverage depends on the condition and porosity of the surface.
Wolman Classic II Woodlife Wood Preservative Deft 015-13 Lacquer Sanding Sealer GAF Master Flow IR61 Slant Back Super Low Profile Roof Louver
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. Just 2"H for better appearance. Injection-molded, high-impact resin construction for long life. Colors complement most roofs. Pre-drilled nail holes make installation easier. 11-3/4" x 9-3/4" opening, 18-1/2" x 17-1/2" flashing, 4-1/4"H, 37 sq.in. of net free ventilating area.
WATER REPELLENT CAR INTERIOR  Duraflo 6050G Square Top Type B Roof Ventilator Duraflo 6050BL Square Top Type B Roof Ventilator
One-step, superhydrophobic, water repelling treatment designed to keep automotive interiors dry longer. This crystal clear formula preserves upholstery and floor mats against damaging moisture and stains without changing the look or feel of the fabric.  For automotive upholstery, floor mats, carpet, car seats and more. Can be used on leather, cloth, synthetic and natural fibers. Covers 20-50 sq ft. Coverage will vary depending on fabric. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene.
Duraflo 6050BR Square Top Type B Roof Ventilator LL Buildsite DA1212W Square Dual Louver LL Buildsite DA1212 Square Dual Louver
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
LL Buildsite DA1218 Rectangle Dual Louver Flood/PPG FLD4-01 E-B Emulsa-Bond Bonding Primer Additive Wolman Coppercoat Woodlife Wood Preservative
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Use with exterior latex-based paint. Assures adhesion to chalky, dusty, masonry, wood, weathered asbestos and aluminum siding. Eliminates the need for primer. Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon.
Duraflo 6065BL Slant Back Roof Ventilator Duraflo 6065BR Slant Back Roof Ventilator Cabot 8064 Sanding Sealer
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17.5" x 18.5" flashing with 4.3" height. 61 square inches of net free area. UV resistant polypropylene. Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17.5" x 18.5" flashing with 4.3" height. 61 square inches of net free area. UV resistant polypropylene. Resists yellowing and provides a low odor, clear sealer. Sands without gumming the sandpaper. Dries quickly to allow multiple applications in one day. For use on doors, furniture, woodwork, cabinets and shelves. Do not use on floors. One gallon cover up to 400 - 500. sq. ft.
LL Buildsite DA1218W Rectangle Dual Louver Deft 015-04 Lacquer Sanding Sealer WATER REPELLENT OUTDOOR FABRIC
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further. One-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula preserves outdoor items against damaging moisture without changing the look or feel of the fabric. For shoes, outdoor patio furniture, backpacks, gloves, camping gear, and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. Not recommended for interior carpet or upholstery.
WATER REPELLENT BOOT/SHOE     WATER REPELENT HUNTING/OUTDOOR Old Masters 45004 Oil Based Sanding Sealer
One-step, superhydrophobic, water repelling treatment designed to keep footwear dry longer. This crystal clear formula preserves footwear against damaging moisture without changing the look or feel of the fabric.  For work boots, tennis shoes, dress and casual shoes, and more. Can be used on leather, suede, nubuck, canvas and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. One-step, superhydrophobic, water repelling treatment designed to keep items dry longer. This crystal clear formula allows fabrics to breathe, while repelling water from the surface.  Preserves outdoor gear against damaging moisture without changing the look or feel of the fabric. Scent-free. For tents, camping gear, hats, hunting boots and apparel. Can be used on polyester, canvas, nylon, suede and more. Covers 20-60 sq ft. Coverage will vary depending on fabric. Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates.
Cabot 8065 Quick Dry Sanding Sealer Zinsser Bulls Eye SealCoat Sanding Sealer Zinsser Bulls Eye SealCoat Oil Based Wood Sealer
Formulated to seal interior bare and stained wood surfaces including doors, furniture, woodwork, cabinets and shelves. Clear, satin finish enhances the natural wood grain. Use under oil-based varnishes or polyurethanes to ensure a smoother topcoat appearance. Dries quickly and can be recoated in one hour. One gallon covers up to 400-500 sq. ft. depending upon surface porosity. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface.
Minwax 65700 Sanding Sealer Varathane 224741H Sanding Sealer LL Buildsite DA1424 Dual Louver
Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon. Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
Wolman Classic II Woodlife Wood Preservative LL Buildsite DA1424W Dual Louver Rustoleum 247596 Magnetic Primer
Provides a mildew protection, penetrating preservative protection and water repellent surface protection. Controls warping, splitting, shrinking and swelling of wood. For all above ground structural pressure treated and untreated wood. Paintable and stainable. EPA registered. Covers approximately 150-250 sq. ft. per gallon depending on wood age and species, surface porosity and method of application. Soap and water clean-up. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Use to turn a wall into a magnetic surface. Can be top coated with any oil or latex paint.
LL Buildsite DA1824 Dual Louver LL Buildsite DA1824W Dual Louver Wolman Coppercoat Woodlife Wood Preservative
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon.
Duraflo 626043-00 Square Gable Vent Duraflo 626060-00 Octagon Gable Vent Duraflo 626055-00 Round Gable Vent
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 58 sq. ins. of net free area. Includes a 3" snap on  trim ring for easy installation. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 55 sq. ins. of net free area.
GAF Master Flow GT12E External Braced Deluxe Turbine Head LL Buildsite DA2430 Dual Louver Duraflo 626080-00 Small Rectangular Gable Vent
Fits most brands of turbine bases. No.GT12E Dade County Approval 04-0618.01. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25".
Duraflo 626075-00 Small Rectangular Gable Vent Lomanco 900 Triangular Line Single Vari-Pitch Louver LL Buildsite DA2430W Dual Louver
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25". Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
GAF Master Flow AIC12 Internal Braced Rotary Turbine Ventilator Minwax 15700 Sanding Sealer Wolman Creocoat Woodlife Wood Preservative
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Clear sealer formulated for application over bare wood. Seals wood grain. Designed to be sanded providing a smooth finish. Can be top coated with any Minwax oil or water-based polyurethane finish. Covers approximately 500 sq. ft. per gallon. Use to prolong the structural integrity of wood, especially non-pressure-treated varieties. Protect wood from termite and other insect attack, mold, mildew, fungal, and dimensional change caused by water absorption. Use as a final finish only, not designed for over-coating. EPA-approved, environmentally-safe, insecticidal preservative substitute for Creosote. Fast, easy clean-up with soap and water.
GAF Master Flow GIC12 Internal Braced Rotary Turbine Ventilator GAF Master Flow GIC12BL Internal Braced Rotary Turbine Ventilator GAF Master Flow GIC12WW Internal Braced Rotary Turbine Ventilator
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved.
Whirlybird GT12 Rigid Spider Internal Braced Turbine Ventilator Gaf Master Flow ARSBL Joint Strap Gaf Master Flow ARSBR Joint Strap
Permanently lubricated ball bearings that ensures long life and no maintenance; fits roof pitch up to 7/12 pitch; easy installation and reduces winter ice breakup. Turbines are exhaust vents. 0.015" stamped galvanized steel. Features 20" x 20" base and 15-3/4" height. Joint straps for AR10 series aluminum ridge vent. Miami Dade County Approved #NOA 99-0422.04. Nos.ARSBLF, ARSBRF, & ARSWHF Florida Building Code (FBC) Approved FL 5027. Joint straps for AR10 series aluminum ridge vent. Miami Dade County Approved #NOA 99-0422.04. Nos.ARSBLF, ARSBRF, & ARSWHF Florida Building Code (FBC) Approved FL 5027.
GAF Master Flow AIC14 Internal Braced Rotary Turbine Ventilator GAF Master Flow GC12E External Braced Rotary Turbine Ventilator GAF Master Flow AIC14WW Internal Braced Rotary Turbine Ventilator
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, 2-piece assembly for faster installation. Permanently lubricated dual bearing system for long lasting performance. Stainless steel ball bearings. 720 CFM air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF & GC12EWWF Florida Building Code (FBC) Approved FL5027. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved.
Lomanco 900 Triangular Line Single Vari-Pitch Louver Duraflo 626120-00 Large Rectangular Gable Vent Quarrix Building Products 58784 Ridge Vent
Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25". Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county.
Diversi-Plast 58786 Ridge Vent Diversi-Plast 58785 Ridge Vent Duraflo 626110-00 Cathedral Gable Vent
Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county. Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 90 sq. ins. of net free area.
GAF Master Flow AIC14BL Internal Braced Rotary Turbine Ventilator Whirlybird B I B-14B Rigid Spider Turbine Ventilator Whirlybird B I B-14 Rigid Spider Turbine Ventilator
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand, and other foreign materials from damaging bearings for long life, less friction, smoother spin, and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, 2-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of 1-piece base fits tighter, makes installation easier, and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Dept. of Insurance Approved. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents.
Whirlybird B I B-12 Rigid Spider Turbine Ventilator Whirlybird B I B-12WB Rigid Spider Turbine Ventilator Whirlybird B I B-12BR Rigid Spider Turbine Ventilator
Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents.
Whirlybird B I B-12B Rigid Spider Turbine Ventilator GAF Master Flow R50A Square Top Roof Louver Cobra 2005 Shingle Over Coil Ridge Vent
Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed. Use on roof pitches from 3/12 to 20/12. Helps remove excess heat and moisture to protect against premature roof deterioration and helps prevent problems with birds, insects and animals in attic. Prevents roof rot in attic or roof deck. Minimizes peeling and extends the life of exterior and interior paint. Limits mold growth. Easy to install, shingle over design is virtually invisible when installed. Includes "Smart Nails" for hand-nailing, or 1-3/4" coil nails for nail guns. Meets or exceeds all code requirements. 16.9 sq. ins. per linear foot of net free ventilating area when hand-nailed. 14.1 sq. ins. per linear foot of net free ventilating area when using nail gun. Will not crack or dent during installation. Won't corrode, rust, or turn brittle. Works with traditional size ridge cap shingles.
Duraflo 626095-00 Half Moon Gable Vent GAF Master Flow IR65G Slant Back Roof Louver Whirlybird B I B-14BR Rigid Spider Turbine Ventilator
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 111 sq. ins. of net free area. High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed. Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents.
Whirlybird B I B-14WB Rigid Spider Turbine Ventilator Whirlybird BEB-12 Rigid Spider External Braced Turbine Ventilator Whirlybird BEB-12B Rigid Spider External Braced Turbine Ventilator
Permanently lubricated upper and lower ball bearing system that ensures long life and no maintenance; all-aluminum rust free construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH. Easy installation and reduces winter ice buildup.  Forever guarantee - residential use. BIB12 Dade County Approved 16-0510.26. BIB14 Miami Dade County Approved 15-0831.08. BIB12  features a 20" x 20" base and 17-1/4" height. BIB14 features a 22" x 22" base and 20" height. Turbines are exhaust vents. Permanently lubricated ball bearing system; all-aluminum construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH; easy installation and reduces winter ice breakup. Forever guarantee-residential use only.  BEB12 Miami Dade County Approved 16-0510.26. BEB14 Miami Dade County Approved 15-0831.08. BEB12 features a 20" x 20" base and 17-5/8" height. BEB14 features a 22" x 22" base and 20-3/8" height. Permanently lubricated ball bearing system; all-aluminum construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH; easy installation and reduces winter ice breakup. Forever guarantee-residential use only.  BEB12 Miami Dade County Approved 16-0510.26. BEB14 Miami Dade County Approved 15-0831.08. BEB12 features a 20" x 20" base and 17-5/8" height. BEB14 features a 22" x 22" base and 20-3/8" height.
Whirlybird BEB-14B Rigid Spider External Braced Turbine Ventilator Lomanco 730 Slant Back Static Roof Ventilator Lomanco 900 Triangular Line Single Vari-Pitch Louver
Permanently lubricated ball bearing system; all-aluminum construction; exclusive vari-pitch base adjusts to 12/12 roof pitch; tested to withstand winds of 110 MPH; easy installation and reduces winter ice breakup. Forever guarantee-residential use only.  BEB12 Miami Dade County Approved 16-0510.26. BEB14 Miami Dade County Approved 15-0831.08. BEB12 features a 20" x 20" base and 17-5/8" height. BEB14 features a 22" x 22" base and 20-3/8" height. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof.  30 square inches of net free ventilating area. 12-3/16" x 17-3/4" x 4" overall size. Miami Dade County approved. Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting.
Lomanco 550 Pan Style Static Roof Ventilator Lomanco LPLUG End Plug Lomanco 730B Slant Back Static Roof Ventilator
All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 550S with a taller throat for use on a shake roofs is available.  50 square inches of net free ventilating area. 15-3/8" x 16-1/2" x 4" overall size. Tight-fitting, high-density foam end plug. To be used in conjunction with LPR ridge vents. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof.  30 square inches of net free ventilating area. 12-3/16" x 17-3/4" x 4" overall size. Miami Dade County approved.
Lomanco 550WB Pan Style Static Roof Ventilator Lomanco 550BR Pan Style Static Roof Ventilator Lomanco 550B Pan Style Static Roof Ventilator
All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 550S with a taller throat for use on a shake roofs is available.  50 square inches of net free ventilating area. 15-3/8" x 16-1/2" x 4" overall size. All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 550S with a taller throat for use on a shake roofs is available.  50 square inches of net free ventilating area. 15-3/8" x 16-1/2" x 4" overall size. All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 550S with a taller throat for use on a shake roofs is available.  50 square inches of net free ventilating area. 15-3/8" x 16-1/2" x 4" overall size.
Cabot 8065 Quick Dry Sanding Sealer Lomanco 100 Flush Mount Rectangular Gable Vent GAF Master Flow R50ABL Square Top Roof Louver
Formulated to seal interior bare and stained wood surfaces including doors, furniture, woodwork, cabinets and shelves. Clear, satin finish enhances the natural wood grain. Use under oil-based varnishes or polyurethanes to ensure a smoother topcoat appearance. Dries quickly and can be recoated in one hour. One gallon covers up to 400-500 sq. ft. depending upon surface porosity. All-aluminum construction. Used for flush mounting. 8" x 8" perma-coated screen attached for insect protection. Machine tab-folded construction. Wide mounting flange. Built-in weather protection. Provides 36 square inches of net free ventilating area. Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
GAF Master Flow R50ABR Square Top Roof Louver Rustoleum 249332 Automotive Primer Surfacers Zinsser Bulls Eye SealCoat Sanding Sealer
Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed. High build, rust resistant, sandable formula. Improves adhesion of the final topcoat and enhances paint color. When brushed or sprayed to metal or fiberglass surfaces will hide sanding scratches and fill uneven surfaces. Must first be combined with an equal 1:1 part of Rust-Oleum Specialty Reducer before spray application. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Apply over new wood or over existing finishes. Compatible with all clear finishes. Tough, non-yellowing finish. Dries in minutes; easy to sand; recoat in less than 1 hour.
Lomanco 900 Triangular Line Single Vari-Pitch Louver GAF Master Flow SSB960ABL Slant Back Roof Louver GAF Master Flow SSB960A Slant Back Roof Louver
Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed.
GAF Master Flow SSB960ABR Slant Back Roof Louver GAF Master Flow SSB960AWW Slant Back Roof Louver GAF Master Flow SSB960AW Slant Back Roof Louver
Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed.
Old Masters 45001 Oil Based Sanding Sealer Gaf Master Flow ARCP End Plug/Connector Lomanco 135B Pan Style Static Roof Ventilator
Seals and protects wood surfaces and can be used to prepare surfaces for the application of a clear topcoat finish. May be applied to all types of bare or stained woods; also recommended as a sandable basecoat or sealer and promotes a smooth, fine finish; contains no stearates. For all AR10 series ridge vent. Weather-shielding rain guard for maximum weather protection. 8" x 8" aluminum screen attached. 144 square inches of net free ventilating area. 11-0602.02 Miami Dade County approved. 20" x 23" x 7-3/4" overall size.
Lomanco 135WB Pan Style Static Roof Ventilator Lomanco 135BR Pan Style Static Roof Ventilator Lomanco 135 Pan Style Static Roof Ventilator
Weather-shielding rain guard for maximum weather protection. 8" x 8" aluminum screen attached. 144 square inches of net free ventilating area. 11-0602.02 Miami Dade County approved. 20" x 23" x 7-3/4" overall size. Weather-shielding rain guard for maximum weather protection. 8" x 8" aluminum screen attached. 144 square inches of net free ventilating area. 11-0602.02 Miami Dade County approved. 20" x 23" x 7-3/4" overall size. Weather-shielding rain guard for maximum weather protection. 8" x 8" aluminum screen attached. 144 square inches of net free ventilating area. 11-0602.02 Miami Dade County approved. 20" x 23" x 7-3/4" overall size.
Lomanco 900 Triangular Line Single Vari-Pitch Louver Lo-OmniRoll LOR-30 Ridge Vent Lomanco 750WB Slant Back Static Roof Ventilator
Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. Can be installed with a pneumatic nail gun or hammer. Two coils of 1-3/4" nails provided. External convolute baffles - incurved design allows flexibility to roll up and out while maintaining its shape. Can be cut at one foot intervals - multiple cut lines eliminates unnecessary scrap. Weather protection and performance with no filter to clog. Molded fanfold end plug. Molded centerline. Nail holes marked every 6" - supported every foot. 11 square inches of net free ventilating area per lineal foot. External venturi baffle. Adjusts from 2/12 to 16/12 roof pitches. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. Miami Dade County Approved 13-0701.11. 52 CFM at wind velocity of 3 MPH; 148 CFM at wind velocity of 8 MPH; 283 CFM at wind velocity of 15 MPH. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved.
Lomanco 750 Slant Back Static Roof Ventilator GAF Master Flow RT65G Square Top Roof Louver GAF Master Flow RT65BR Square Top Roof Louver
Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed.
GAF Master Flow RT65BL Square Top Roof Louver GAF Master Flow RT65WW Square Top Roof Louver GAF Master Flow IR61 Super Low Profile Slant Back Roof Louver
Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Just 2"H for better appearance. Injection-molded, high-impact resin construction for long life. Colors complement most roofs. Pre-drilled nail holes make installation easier. 11-3/4" x 9-3/4" opening, 18-1/2" x 17-1/2" flashing, 4-1/4"H, 37 sq.in. of net free ventilating area.
Lomanco 750-SWB Slant Back Static Roof Ventilator Lomanco 750B Slant Back Static Roof Ventilator Lomanco 750BR Slant Back Static Roof Ventilator
Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved.
Cobra lll CRV3 Shingle Over Ridge Vent Varathane 224740 Sanding Sealer Zinsser SealCoat Interior Sanding Sealer
Shingle-over to blend into ridge line. Allows heat/condensation to escape at most effective location. Watertight, passes 110-MPH wind-driven rain test. External baffles help deflect wind/rain, no end caps needed. Prevents roof rot in attic or roof deck. Minimize peeling and extend the life of exterior and interior paint. Limit mold growth. Specially-designed louver spacing helps keep insects out. Energy-efficient, crush-resistant, with internal structural support for added durability. Extra-flexible hinge design for installation on 3:12 to 16:12 sloped roofs. 3" ring shank nails included to insure proper fastening. Edge overhang for smooth, continuous coverage between sections. Provides 18 sq.in/linear foot net-free ventilating area. 40' replaces 18 conventional or ten 12" turbine roof vents. Hip/ridge compatible with traditional sizes (11-1/2 x 12"). "EasyTear" feature allows product to be hand-torn in 3" increments. Boxed. Universal sealer formulated to work under all clear wood finishes, Oil or water-based polyurethane, lacquers and shellac. Seals wood and is easy to sand. Low odor. Penetrates wood pores deeply to seal and protect wood. Use as a pre-stain conditioner for all wood stains. Compatible with all clear finishes, including oil- and water-based polyurethane, lacquer and shellac. Can be used on new wood or over existing finishes. Use in SCAQMD regulated areas. Tough, non-yellowing finish. Covers approximately 400-600 sq. ft. per gallon depending on application method and surface.
Cobra Snow Country 2027000CU Ridge Vent Lomanco 750-GSB Slant Back Static Roof Ventilator Lomanco 750-GSBR Slant Back Static Roof Ventilator
Helps resist snow infiltration in harsh winter climates. Prevent roof rot in attic or roof deck. Minimize peeling and extend the life of exterior and interior paint. Limits mold growth. Allows heat/condensation to escape at most effective location. Shingle-over design blends into ridge line. Watertight, passes 110-MPH wind-driven rain test. External baffles help deflect wind/rain, no end caps needed. 1/8" louver spacing helps keep insects out. Energy-efficient, crush-resistant, with internal structural support for added durability. Flexible 3-point hinge for installation on 3:12 to 16:12 sloped roofs. 40' replaces 18 conventional or ten 12" turbine roof vents. Quick alignment, special tabs for easy, reliable connection. No overdrive, reinforced nail holes. "EasyTear" feature allows product to be hand-torn in 3" increments. Edge overhang allows smooth, continuous coverage between sections. Provides 18 sq.in/linear foot net-free ventilating area. Works with traditional size ridge cap shingles. Boxed. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size.
Lomanco 750-GSWB Slant Back Static Roof Ventilator Lomanco 900 Triangular Line Single Vari-Pitch Louver Lomanco 600 Pan Style Static Roof Ventilator
Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 600S with a taller throat for use on a shake roofs is available.  60 square inches of net free ventilating area. 16-5/8" x 18-7/8" x 4" overall size.
Lomanco 600 Pan Style Static Roof Ventilator Lomanco 600 Pan Style Static Roof Ventilator Wolman Coppercoat Woodlife Wood Preservative
All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 600S with a taller throat for use on a shake roofs is available.  60 square inches of net free ventilating area. 16-5/8" x 18-7/8" x 4" overall size. All aluminum construction. Includes 8" x 8" perma-coated aluminum screen extended to the edges of the cap. Large nailing flange. Rolled flange on vent stack to prevent weather infiltration. A 600S with a taller throat for use on a shake roofs is available.  60 square inches of net free ventilating area. 16-5/8" x 18-7/8" x 4" overall size. Prevents attack from termites and other wood boring insects while it protects against rot and decay. Inhibits mold, mildew and staining, and staining fungi. EPA registered, insecticidal preservative prohibits rot and decay. Anti-wicking property resists moisture absorption controls warping, swelling, and end checking. Imparts a transparent green color that naturally fades over time. Paintable and stainable. Easy soap and water clean up. Covers approximately 200 to 350 sq. ft. per gallon.
Durovent UDV2248 Rafter Ventilator F&P 14415 Oil Based Wood Preservative F&P 14395 Oil Based Wood Preservative
The polystyrene material provides a lightweight water resistant air channel. Ideal for high volume new construction or lower cost re-insulation. Perforated center line to fit all applications. Wide nailing flange and center strut allows for easy installation. Economical way to meet energy code requirements for attic air flow. UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood. UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood.
Lomanco OR4 Ridge Vent Lomanco 900 Triangular Line Single Vari-Pitch Louver Diversi-Plast 59092 Ridge Vent
Internal aerodynamic curved baffles. 18 square inches of net free ventilating area per lineal foot. External perpendicular omni baffles. Weatherproof under-lapping joint. Four drain holes per foot per side. External venturi baffle. Pre-formed to 3/12 pitch. 10 supported nail holes.  Alignment tabs. External water shield. Slot width guide lines. Adjusts from 2/12 to 16/12 roof pitches. Co-polymer materials. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. No connectors required. Molded fanfold end plugs - no accessories or alterations needed. Miami Dade County Approved 16-0510.27. 95 CFM at wind velocity of 3 MPH; 235 CFM at wind velocity of 8 MPH; 430 CFM at wind velocity of 15 MPH; OR4 with nails and OR4 with screen available. Rust-free, vari-pitch louver. Adjustable roof pitch. 8" x 8" perma-coated screen. Wide mounting flange. Pivoting blades provide maximum weather protection. Net free area varies based on pitch setting. Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county.
F&P 14416 Oil Based Wood Preservative F&P 14396 Oil Based Wood Preservative F&P 14406 Oil Based Wood Preservative
UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood. UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood. UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood.
F&P 14426 Oil Based Wood Preservative Lo-OmniRidge LOR9-4 Ridge Vent Deft 015-01 Lacquer Sanding Sealer
UV-resistant, deep penetrating, oil-based preservative finish designed for wood siding, shakes, shingles, fence, roofs, and decks. Soap and water cleanup. Guaranteed to repel water and protects against decay for 4 years on vertical and 2 years on horizontal surfaces.  EPA registered preservative. Water repellent exceeds Federal specification TT-W-572B, 3.7.Covers approximately 150-300 sq. ft. per gallon. Coverage depends on type of wood. Can be installed with a pneumatic nail gun or hammer. Internal aerodynamic curved baffles. External perpendicular omni baffles. Weatherproof underlapping joint. Four drain holes per foot per side. 11 square inches of net free ventilating area per lineal foot. External venturi baffle. Adjusts from 2/12 to 16/12 roof pitches. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. Nail holes marked every 6" - supported every foot. Molded nail lines and centerline. Alignment tabs. External water shield. Slot width guide lines. Molded fanfold end plug. Miami Dade County Approved 13-0701.10. 52 CFM at wind velocity of 3 MPH; 148 CFM at wind velocity of 8 MPH; 283 CFM at wind velocity of 15 MPH. Formulated to precede the application of Clear Wood Finish Brushing Lacquer. The sanding sealer serves as the base coat and is designed to seal and protect the surface. Ideal for stained or bare wood surfaces, including furniture, floors, cabinets, doors and trim. Seals the wood pores which allows the top coat go further.
Provent UPV1448 Roof Ventilator Provent UPV2248 Roof Ventilator Gaf Master Flow AR10BLH Ridge Vent
Ideal for premium construction and for difficult applications like re-insulation and spray foam. "PROVENT" may be installed prior to the soffit panel installation without fear of blow-out. Made with Pro-Grade tear resistant high impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow. Ideal for premium construction and for difficult applications like re-insulation and spray foam. "PROVENT" may be installed prior to the soffit panel installation without fear of blow-out. Made with Pro-Grade tear resistant high impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow. Maintenance-free all aluminum, aerodynamic profile. Built-in weather baffle, extra wide free flow drainage areas, pre-punched nail holes. Design helps prevent insect, rain and snow infiltration. Base adjustable to broad range of roof pitch 3/12 - 8/12. Dade County Approved 02-0524.01. Nos.AR10BLF, AR10BRF, & AR10WHF Florida Building Code (FBC) Approved FL5027.
Gaf Master Flow AR10BRH Ridge Vent Lomanco LPR10B Ridge Vent Lomanco LPR10BR Ridge Vent
Maintenance-free all aluminum, aerodynamic profile. Built-in weather baffle, extra wide free flow drainage areas, pre-punched nail holes. Design helps prevent insect, rain and snow infiltration. Base adjustable to broad range of roof pitch 3/12 - 8/12. Dade County Approved 02-0524.01. Nos.AR10BLF, AR10BRF, & AR10WHF Florida Building Code (FBC) Approved FL5027. One-piece construction. 3/8" x 1/2" slotted weep holes in wind baffles for water run-off. 1/8" x 1" louvered openings inverted to block weather infiltration. Can be cut to desired length at 2-foot intervals. Pre-notched nail holes. 2" wide nailing flange. Male/female connections - no straps necessary. Adjustable from 3/12 to 12/12 roof pitches. 18 square inches of net free ventilating area per lineal foot. Miami Dade County Approved 16-0510.24. 43 CFM at wind velocity of 3 MPH; 117 CFM at wind velocity of 8 MPH; 221 CFM at wind velocity of 15 MPH. One-piece construction. 3/8" x 1/2" slotted weep holes in wind baffles for water run-off. 1/8" x 1" louvered openings inverted to block weather infiltration. Can be cut to desired length at 2-foot intervals. Pre-notched nail holes. 2" wide nailing flange. Male/female connections - no straps necessary. Adjustable from 3/12 to 12/12 roof pitches. 18 square inches of net free ventilating area per lineal foot. Miami Dade County Approved 16-0510.24. 43 CFM at wind velocity of 3 MPH; 117 CFM at wind velocity of 8 MPH; 221 CFM at wind velocity of 15 MPH.
   
 
1