Home > HARDWARE > CONSTRUCTION HARDWARE > DECK & PATIO CONSTRUCTION
Choose a sub category:
PORCH RAILING & CONNECTORS DECK RAILING & CONNECTORS DECK POST CAPS
Sort By:
1
Village Ironsmith LS100 Standard Lag Screw Set CAP SCREW BUTTON 75MM M6THREAD LL Buildsite V500 Column Socket
Used to secure railing floor flanges to wood surfaces (1 package required for each flange). Color-coded yellow packaging, labeling, and POS materials for easy selection. M6 RH thread. 316 stainless steel. Use with Ram Tail barrel jaw. Use to mount columns to wood surfaces with LS100 lag screws, or to concrete with MA100 masonry anchors, fasteners NOT INCLUDED. Manufactured heavy-duty steel construction, baked-on powder paint. Fits 1" x 1" Column.
LL Buildsite LT200 Lambs Tongue Deckorators 74834 Railing Connector LL Buildsite ST100 Stub Support
Decorative scroll for posts at railing run ends. Heavy-duty steel with baked-on powder coating. Color-coded yellow packaging, labeling, and POS materials for easy selection as anchoring or ornamental. 2-1/4" Depth. Pre-drilled to ensure accurate attachment of the railing to the post. Connectors can be used on both railing and composite materials. Includes stainless steel screws. Use for attaching actual 1-1/2" x 3-1/2" rails. Intermediate support for rails. Use with 4' or 6' rail sections. 5/8" Depth.
Deckorators 74815 Round Baluster Connector TENSIONER 75MM CYLINDRICAL    Marine Ornamental Classic 72213 Post Cap
Comes with stainless steel screws and will install ten classic balusters. Allows classic balusters to be secured to the rail without drilling. Can be used on both wood and composite railings. ACQ and CA compliant. Use with Ram Tail threaded jaws or swage stud. Thru-post tensioning end. Protects post from nature's elements. Cedar. Has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2".
Deckorators 74818 Stair Connector Deckorators 74817 Stair Connector LL Buildsite FF125 Floor Flange Rail
Designed to work with stair angles between 30 to 35 degrees and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant. Designed to work with stair angles between 30 to 35 degrees and works with both wood and composite materials. Comes with stainless steel screws and will install ten classic balusters. ACQ and CA compliant. For use with the 1-1/4" Rail systems (Classic, Metropolitan and Traditional).
CABLE RAILING WASHER FLAT 10PK CABLE RAILING HEX NUT 10PK    LL Buildsite ND125 Rail Fastener
Ram Tail         Cable Railing Flat Washer, 316 Marine Grade Stainless Steel M6 RH thread. No drill connectors for use with rail systems to mount rails to post (1 package required for each rail section). Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection.
Marine Ornamental 72889 High Point Pyramid Post Cap TENSIONER 115MM CYLINDRICAL   EYE PLATE SQUARE 2PACK
Protects post from nature's elements. Cedar. Has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". Use with Ram Tail threaded jaws or swage stud. Thru-post tensioning end. Use with turnbuckle or fork jaw. Size: 1.25" wide x 1" long.
Marine Ornamental Classic 72262 Post Cap with Cedar Wood Base SPANNING TOOL MULTI SIZED     LL Buildsite NP125 Newell Post
Protects post from nature's elements. Has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". Fits all Ram Tail fittings. Use with rail systems for installation. Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection. Use for Classic rails. Flat black (plastic) cap included. Fits 1-1/4" Rail.
Marine Ornamental 106584 High Point Pyramid Post Cap Marine Ornamental Deckorail 72302 Flat Plateau Victoria Post Cap FORK JAW CABLE HAND RAILING
Protects post from nature's elements. Has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". Protects post from nature's elements. Southern pine. 4" x 4" post cap has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". 6" x 6" post cap has 5-5/8" x 5-5/8" opening size, for posts measuring 5-1/2" x 5-1/2". Copper Top. For use with 3mm cable.
EYE JAW CABLE HAND RAILING    CABLE HAND RAILING BARREL JAW CABLE RAIL LAG JAW
For use with 3mm cable. M6 RH Thread. For use with 3mm cable. For use with 3mm cable.
CABLE RAIL JAW 45MM           CABLE SCREW LAG EYE           Marine Ornamental 106581 High Point Top Post Cap
M6 RH thread. For use with 3mm cable. 316 stainless steel. Protects post from nature's elements. Cedar. 4" x 4" post cap has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". 6" x 6" post cap has 5-5/8" x 5-5/8" opening size, for posts measuring 5-1/2" x 5-1/2".
Marine Ornamental 106579 High Point Top Post Cap with Cedar Wood Base LL Buildsite MP125 Newell Post Marshall FVAW Round Foundation Vent Area Wall
Protects post from nature's elements. 4" x 4" post cap has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". 6" x 6" post cap has 5-5/8" x 5-5/8" opening size, for posts measuring 5-1/2" x 5-1/2". Use with rail systems for installation. Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection. Use for Metropolitan & Traditional rails. Fits 1-1/4" Rail. Rounded bottom corners for extra safety. Stamped from single steel sheet. Bright finish reflects light into basement. Hole in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back filling should be done gradually to prevent excessive pressure against area wall. 19-1/2" Wdth. x 10" Dpth.
CABLE RAIL JAW 75MM           LL Buildsite Classic CR425 Ornamental Railing Deckorators Classic Round Baluster
M6 RH thread. For use with 3mm cable. Traditional railing design featuring a 6" On Center Twisted Spindle; installs using other Village Ironsmith accessories such as Classic Newel post, Floor flange and no-drill connector; 28" rail panel height. 26" balusters are designed to build a 36" high rail. 32" balusters are designed to build a 42" high rail. 2.5 balusters are needed per lineal foot of railing. Install to wood or composite railings.
SWAGE STUD THREADED CABLE 3MM CABLE RAILING ACORN NUT 10PK  Marshall AWR12/680 Round Standard Area Wall
Requires swaging tool. Use with 3mm wire rope M6 RH Thread. M6 RH thread. Stamped from single steel sheet with rolled edges for added safety. Bright finish reflects light into basement. Holes in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back fill should be done gradually to prevent excessive pressure against area wall. 37" Wdth. x 16" Dpth.
TURNBUCKLE ASSEMBLY           Amerimax 75204 Area Wall LL Buildsite Classic CR625 Ornamental Railing
For use with 3mm cable. No sharp edges, won't damage or dent. Predrilled for easy installation and can be bolted together. Units can be combined for added height. Cover not included. 37" Wdth. x 16" Dpth. Traditional railing design featuring a 6" On Center Twisted Spindle; installs using other Village Ironsmith accessories such as Classic Newel post, Floor flange and no-drill connector; 28" rail panel height.
Marine Ornamental 72219 High Point Top Post Cap with Cedar Wood Base Marine Ornamental 106580 Post Cap Deckorators Classic Round Baluster
Protects post from nature's elements. 4" x 4" post cap has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". 6" x 6" post cap has 5-5/8" x 5-5/8" opening size, for posts measuring 5-1/2" x 5-1/2". Protects post from nature's elements. Cedar. 4" x 4" post cap has 3-5/8" x 3-5/8" opening size, for posts measuring 3-1/2" x 3-1/2". 6" x 6" post cap has 5-5/8" x 5-5/8" opening size, for posts measuring 5-1/2" x 5-1/2". 26" balusters are designed to build a 36" high rail. 32" balusters are designed to build a 42" high rail. 2.5 balusters are needed per lineal foot of railing. Install to wood or composite railings.
CUTTER WIRE 3MM               Deckorators Classic Round Baluster POST SLEEVES RAILING
High-quality cable cutters. Cuts up to 4mm cable. 26" balusters are designed to build a 36" high rail. 32" balusters are designed to build a 42" high rail. 2.5 balusters are needed per lineal foot of railing. Install to wood or composite railings. Use on mid-posts where cable passes through to prevent chaffing.
Amerimax 75208 Area Wall Marshall AWR18/682 Round Standard Area Wall Amerimax 75210 Area Wall
No sharp edges, won't damage or dent. Predrilled for easy installation and can be bolted together. Units can be combined for added height. Cover not included. 37" Wdth. x 16" Dpth. Stamped from single steel sheet with rolled edges for added safety. Bright finish reflects light into basement. Holes in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back fill should be done gradually to prevent excessive pressure against area wall. 37" Wdth. x 16" Dpth. No sharp edges, won't damage or dent. Predrilled for easy installation and can be bolted together. Units can be combined for added height. Cover not included. 37" Wdth. x 16" Dpth.
TENSIONING/FIXED END FOR-8017 LL Buildsite Metropolitan MR450 Ornamental Railing LL Buildsite Traditional TR475 Ornamental Railing
Use in straight run applications. 316 stainless steel. Includes (1) tensioning end and (1) fixed end. Contemporary railing design featuring a 4" On Center 1/4" x 1/4" Vertical Pickets; installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor flange and no-drill connector; installed height 36" full panel. Classic railing design featuring a 4" On Center Twisted Spindle. Installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor Flange and No-Drill Connector. Installed height 36" full panel.
Deckorators 74737 Baroque Baluster Deckorators 50152 Baroque Baluster FORK JAW CABLE HANDRAILING 5PK
2.5 balusters needed per lineal foot of railing. All balusters come with color-matched screws. Will install to wood or composite railings. 2.5 balusters needed per lineal foot of railing. All balusters come with color-matched screws. Will install to wood or composite railings. For use with 3mm cable.
Marshall AWR24/683 Round Standard Area Wall CABLE RAIL LAG JAW FIXED END  Marshall AWR36 Round Area Wall
Stamped from single steel sheet with rolled edges for added safety. Bright finish reflects light into basement. Holes in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back fill should be done gradually to prevent excessive pressure against area wall. 37" Wdth. x 16" Dpth. For use with 3mm cable. Stamped from single steel sheet with rolled edges for added safety. Bright finish reflects light into basement. Holes in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back fill should be done gradually to prevent excessive pressure against area wall. 37" Wdth. x 16" Dpth.
LL Buildsite Traditional TR675 Ornamental Railing Billy Penn 8522 Roof Edge WIRE ROPE 3MM 1X19 100FT SS
Classic railing design featuring a 4" On Center Twisted Spindle. Installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor Flange and No-Drill Connector. Installed height 36" full panel. Provides a nice finished appearance to the eave line and the face with its kick-out at the bottom that diverts water from the facia board to eliminate rot. 10' length. 316 stainless steel 1 x 19 3MM.
Billy Penn 8548 Roof Edge TURNBUCKLE ASSMBLY5PK         LL Buildsite Metropolitan MR650 Ornamental Railing
Provides a nice finished appearance to the eave line and the face with its kick-out at the bottom that diverts water from the facia board to eliminate rot. 10' length. For use with 3mm cable. Contemporary railing design featuring a 4" On Center 1/4" x 1/4" Vertical Pickets; installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor flange and no-drill connector; installed height 36" full panel.
Billy Penn 8552 Eave Drip Billy Penn 52 Eave Drip Genova 19563 Drip Edge
Protects and covers roof edge; acts as a starter strip for a true edge to align shingles. The face with its kick-out at the bottom diverts rain water from the facia board helping to eliminate rot. 10' length. Adds support to shingles when they extend over the roof's edge. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. 26 Gauge. 10' Length. Uniquely designed for use on roofs which do not have sufficient overhang to direct rainwater into the gutter system. Its Twin "T" design gives you maximum protection against water escaping behind the gutter system onto the fascia.
Genova 19564 Drip Edge Billy Penn 8554 Eave Drip Billy Penn 8558 Eave Drip
Uniquely designed for use on roofs which do not have sufficient overhang to direct rainwater into the gutter system. Its Twin "T" design gives you maximum protection against water escaping behind the gutter system onto the fascia. Protects and covers roof edge; acts as a starter strip for a true edge to align shingles. The face with its kick-out at the bottom diverts rain water from the facia board helping to eliminate rot. 10' length. Protects and covers roof edge; acts as a starter strip for a true edge to align shingles. The face with its kick-out at the bottom diverts rain water from the facia board helping to eliminate rot. 10' length.
Billy Penn 101 Starter Strip Amerimax 5601400120 Eave Overhanging Standard Drip Edge Amerimax 5701419120 Eave Overhanging Drip Edge
Used during the installation of vinyl siding. It provided a means of securing the first bottom piece of siding to the wall. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE.
Amerimax 5701400120 Eave Overhanging Standard Drip Edge CABLE 3MM 1 X 19 X 250FT      Amerimax 75447 1-Piece Egress Modular Window Well
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE. Size: 3mm, 1x19. Single-part modular system with durable structural foam construction. Snap-together connections. Build-in ladder/steps with non-slip surface. Accommodates all Egress windows from 32" to 48" wide. Increases natural light in basement. Easy to assemble, maintenance-free, rust free and UV-stabilized. Back-fill bracing not required. Complies with IRC 2000 Egress Code. Includes 1 piece. 52" Wdth. x 43" Dpth.
Billy Penn Economy 356 Angle Flashing Amerimax 77103 Fascia Trim Billy Penn 144 Standard Eave Drip
An easy way to flash the wall to the roof in an end wall application or the chimney to the roof. 10' length. Maintenance free painted aluminum. Use in conjunction with soffit pieces. 30 degree baked on polyester top coat, enamel finish, with .0175" thickness. Adds support to shingle when they are extended over roof's edge. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE.
Amerimax Economy 5509919120 Eave Overhanging Drip Edge Amerimax Economy 5509900120 Eave Overhanging Drip Edge Marshall AWR30 Round Area Wall
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-7/16" X 10' - 1" FACE. Stamped from single steel sheet with rolled edges for added safety. Bright finish reflects light into basement. Holes in flanges for bolting to wall. Deep corrugation stiffens against back fill. All back fill should be done gradually to prevent excessive pressure against area wall. 37" Wdth. x 16" Dpth.
Amerimax 5504519120 Hemmed Drip Edge Amerimax 5504500120 Hemmed Standard Drip Edge DOOR BARN 3-LIGHT WHITE FINISH
Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-1/3" X 10' - 1-1/2" FACE. Protects and covers roof edge. Directs run-off into gutters. For new construction and reroofs. Used along gutter line of roof edge. Acts as a starter strip for a true edge to align shingles. The face, with its kickout at the bottom, diverts rain water from the facia board helping to eliminate rot. Standard gauge. 5/8" overhang, throw out included in face size. 2-1/3" X 10' - 1-1/2" FACE. 3 Lite design in bright white finish, pre-finish barn door which requires no priming, painting or staining. Barn door kit includes: Rustic matte black hardware, track, handle, matching backer board and barn door. Trackless door design keeps floor opening clear and hazard free. Ready-to-assemble, pre-drilled mounting holes and bottom-groove guide. Fits openings between 28"-34" wide and opening height of 80-1/2". Actual panel: 36" x 84" x 1-3/8".
CABLE 3MM 1 X 19 X 500FT      DOOR BARN Z-DESIGN IRN AGE FIN DOOR BARN GUNSTOCK FINISH
DOOR BARN GUNSTOCK FINISH
Our Price: $384.96
Size: 3mm, 1x19. Cheval Z design in Iron Age finish, pre-finish barn door which requires no priming, painting or staining. Barn door kit includes: Rustic Matte black hardware, track, handle, matching backer board and barn door. Trackless door design keeps floor opening clear an hazard free. Ready-to-assemble, pre-drilled mounting holes and bottom-groove guide. Fit openings between 28"-34" wide and opening height of 80-1/2". Actual Panel: 36" x 84" x 1-3/8". Double X design in Gunstock oak finish, engineered wood, pre-finish barn door which requires no priming, painting or staining. Barn door kit includes: Rustic matte black hardware, track, handle, matching backer board and barn door. Trackless door design keeps floor opening clear and hazard free. Ready-to-assemble, pre-drilled mounting holes and bottom-grove guide. Fits openings between 28" - 34" wide and opening height of 80-1/2". Actual panel: 36" x 84" x 1-3/8".
DOOR BARN K-STYL SOLID PINE   CABLE 3MM 1 X 19 X 1000FT
Sierra complete barn door kit: Unfinished door ready to be painted or stained, Barn door kit includes: Rustic Matte Black hardware, track, handle, wood backer board and barn door. Trackless door design keeps floor opening clear and hazard free. Ready-to-assemble, pre-drilled mounting holes and bottom-groove guide. Fits openings between 28"-34" wide and opening height of 80-1/2". Actual panel: 36" x 84" x 1-3/8". Size: 3mm, 1x19.
   
 
1