Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > PLYWOOD CLIPS
Sort By:
1
USP Lumber JL26IF-TZ Standard Invert Flange Joist Hanger Frost King VX620 Gutter Guard Village Ironsmith LS100 Standard Lag Screw Set
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Durable, flexible mesh can be easily unrolled, cut to length with scissors and installed in any type of gutter. Keeps leaves and debris from clogging gutters. Will not rust or corrode. Used to secure railing floor flanges to wood surfaces (1 package required for each flange). Color-coded yellow packaging, labeling, and POS materials for easy selection.
Amerimax 21059 Expandable Leaf Gutter Strainer USP Lumber JDS24 Double Shear Saddle Purlin Hanger USP Lumber JL28IF-TZ Standard Invert Flange Joist Hanger
Positioned so that it strains out debris to prevent any from clogging downspout. No mounting hardware required, stays in place. Bulk. Designed for quick installation of purlins between rafters, joists or trusses in post and beam structures. One-piece construction assures a consistent flush fit between purlin and joist or rafter. A reinforced "double lap" seat boosts the load capacity of this heavy-duty purlin hanger. Requires (4) 10d x 1-1/2" nails for header and (4) 10d" nails for each purlin. Features a 1-9/16" top fold; pending IAPMO-ES evaluation. Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Amerimax 85280 Convex Gutter Guard LL Buildsite V500 Column Socket Billy Penn 1750 Gutter Guard
Made of galvanized steel. Convex design prevents debris accumulation. Will not collapse under ice, snow, or debris. No tools needed for installation. 3' sections fit any standard "K" style gutters. Hinges clip to the front of the gutter. Helps prevent leaves, twigs, and other debris from falling into the gutters and clogging both the gutters and downspouts. Use to mount columns to wood surfaces with LS100 lag screws, or to concrete with MA100 masonry anchors, fasteners NOT INCLUDED. Manufactured heavy-duty steel construction, baked-on powder paint. Fits 1" x 1" Column. Used to cover the gutter to keep it clear of leaves and debris while allowing water to be carried through the gutter to the downspout.
USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger Frost King W103/12 Wedge Downspout Screen Frost King SP1/12 Construction Insulation
Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Unique self cleaning features allows water to flow freely even when leaves and debris are present. Creates an insulating barrier that retains heat or cold, seals out weather and damps vibration. Can be used around water heaters, oil burners, heating and air conditioner ducts; prevents heat loss and sweating on pipes, auto hoods and trunks.
Amerimax 85322 Gutter Cover LL Buildsite LT200 Lambs Tongue LL Buildsite ST100 Stub Support
Water flows around nose of solid gutter cover and into gutter through slotted channel. Helps keep leaves, pine needles, and other debris out of the gutter. 4' sections install in 4", 5", and 6" metal gutters. Slides under shingles and hooks to the front edge of the gutter. No special tools required. Flex design accommodates many different pitched roofs. Made of rigid PVC. Decorative scroll for posts at railing run ends. Heavy-duty steel with baked-on powder coating. Color-coded yellow packaging, labeling, and POS materials for easy selection as anchoring or ornamental. 2-1/4" Depth. Intermediate support for rails. Use with 4' or 6' rail sections. 5/8" Depth.
GutterStuff GS-K5 Foam Filter LL Buildsite FF125 Floor Flange Rail LL Buildsite ND125 Rail Fastener
Keeps debris from entering the gutter. Truncated feature will keep leaves out and prevent ice and debris from entering in the back of the gutter. Does not lose support, bend or sag. Fits completely inside any 5" K style gutter. Made of durable, lightweight outdoor polyether foam. Does not require a contractor or special tools. Includes a UV stabilizer and germicide. Filter is non-absorbent, allowing water to run through. For use with the 1-1/4" Rail systems (Classic, Metropolitan and Traditional). No drill connectors for use with rail systems to mount rails to post (1 package required for each rail section). Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection.
RH Tamlyn PC1532 Plywood Clip RH Tamlyn PCS716 Plywood Clip RH Tamlyn PCS12 Plywood Clip
With built-in spacer for use when support spacing exceeds the maximum length of an unsupported edge. Boxed. Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.
RH Tamlyn PCS1532 Plywood Clip LL Buildsite NP125 Newell Post Blueskin HE201WB929 Flash Membrane
Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Use with rail systems for installation. Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection. Use for Classic rails. Flat black (plastic) cap included. Fits 1-1/4" Rail. A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils.
USP Lumber SKH28R-TZ Skewed Left Joist Hanger USP Lumber SKH28L-TZ Skewed Left Joist Hanger Squeek No More 1011345 Screw Set
Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. Specially scored waxed screws. Scored head breaks off at the same place every time. Carded.
RH Tamlyn PCS58 Plywood Clip FLASH MEMBRANE 3INX75FT       Blue Skin BH200WB4559 Window and Door Flashing
FLASH MEMBRANE 3INX75FT
Our Price: $13.55
Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. A flexible polyethylene waterproof flashing with a super grip rubberized asphalt self-sticking adhesive. Use to block moisture from damaging posts, apply to post at grade allowing at least 1 in. above grade, deck joists and ledger boards. Prevents wood rot and decay caused by water accumulating under the deck boards and extends the life of the deck. Can be applied with temperatures of 35 F and above. Can be used as a corrosion barrier between ACQ, CA-B or ACZA treated lumber and metal surfaces. Easily installs by cutting to desired length, center over joist, remove paper and firmly press into place. This product re-seals around decking screws insure waterproofing. Thickness: 25mils. Self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue engineered film. The membrane is specifically designed to be self-adhered to a prepared substrate. SBS modified membrane can be applied in temperatures as low as 10 F. Blue polypropylene film top surface and siliconized release film bottom surface. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board, and plywood. Impermeable to air, moisture vapor, and water. Peel and stick application; no flame required. Factory controlled thickness. .9mm thickness. Self-sealing when punctured.
LL Buildsite MP125 Newell Post Blueskin HE201WB968 Flash Membrane INSUL R11K 15X40FT MINI-ROLL
Use with rail systems for installation. Manufactured heavy-duty steel construction with baked-on powder paint. Engineered for value and ease of installation. Color-coded packaging, labeling, and POS materials for easy selection. Use for Metropolitan & Traditional rails. Fits 1-1/4" Rail. A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils. Kraft faced mini rolls - "Greenguard" certified LEED eligible.
LL Buildsite Classic CR425 Ornamental Railing Maccourt W4419 Elongated Window Well Cover Maccourt Low Profile Window Well Cover
Traditional railing design featuring a 6" On Center Twisted Spindle; installs using other Village Ironsmith accessories such as Classic Newel post, Floor flange and no-drill connector; 28" rail panel height. Fits over window wells of 40" or less in length projecting 16" or less from house. Improves basement insulation. Keeps out rain, snow and debris. Made of durable, impact-resistant plastic. One size fits both circular and rectangular configurations. Custom low profile design made of durable, impact-resistant plastic. Improves basement insulation. Easy snap-clamp installation. Keeps out rain, snow and debris.
Vestal AD459 Ash Dump Vestal ST-88 Cleanout Door INSUL R13K 15IN X 32FT ROLL
Cooled ashes are swept into ash dump to be cleaned later. USA made. Allows debris to be swept and removed that has collected in the chimney. Domestic. Kraft faced mini rolls - "Greenguard" certified LEED eligible.
USP Lumber NA11-5MC Joist Hanger Nail USP Lumber NA9-5MC Joist Hanger Nail Squeek No More 1010543 Floor Squeak Repair Kit
Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Eliminate squeaks quickly and permanently. Can be applied to 2nd floors, hardwood floors, carpet, and stairs. Each kit contains: 1 - alignment and depth control fixture, 50 - specially scored waxed screws, 1 - special driver bit, 1 - complete instruction kit. Carded.
Reflectix 2222-16-25 7-Layer Reflective Staple Tab Insulation Blueskin HE201WB954 Flash Membrane LL Buildsite Classic CR625 Ornamental Railing
Easy installation ? scissors and staple gun are all you need.  3/4" staple tab designed for 16" OC Joists. All season performance.  Great for insulating radiant heating systems.  5/16? thick, multi layer, double bubble reflective insulation .  Reflects 94% of radiant heat.  Class 1, Class A fire rating.  Any seams should be sealed with TVM Metalized Tape for maximum effectiveness. A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils. Traditional railing design featuring a 6" On Center Twisted Spindle; installs using other Village Ironsmith accessories such as Classic Newel post, Floor flange and no-drill connector; 28" rail panel height.
Deckmate 90166 Deck Bench Bracket with Bench Bracket Protecto Seal 45 805204SW Exposable Waterproofing Membrane ANGLE 2X4IN TRIPLE ZINC 12GA
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7" of deck space. Assembled unit stands 36"H for deck railing, seat is 17"H. Quick and easy to assemble using basic tools. Includes bench bracket, hardware and instructions. LUMBER NOT INCLUDED. Exposable membrane is quick and easy to use. Made with styrene-butadeine-styrene (SBS) modified rubberized asphalt pressure-sensitive adhesive. Durable, puncture and abrasion resistant. A cross laminated polyethylene film is laminated to an aluminum foil for ultraviolet and weather resistance. Shrink Wrapped. Provides a 90? connection for medium/heavy duty applications; stronger than angled nailing or screw fastening; help ensure joints are consistently straight and strong.
INSUL R19K 6.25H X 15L X 94W  INSUL R19K 15IN X 39.16FT ROLL Blueskin HE201WB976 Flash Membrane
Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible. Kraft faced rolls - "Greenguard" certified LEED eligible. A self-adhering membrane consisting of an SBS rubberized asphalt compound which is integrally laminated to a blue-engineered film. Excellent adhesion to prepared substrates of concrete, concrete block, primed steel, aluminum mill finish, anodized aluminum, galvanized metal, gypsum board and plywood; impermeable to air, moisture vapor and water; easy to install peel and stick application, no flame required; thickness controlled at point of manufacture; membrane is self-sealing when penetrated with self-tapping screws or nails. Thickness: 25 mils.
ANGLE 2X6IN TRIPLE ZINC 12GA  Amerimax 75260 Area Wall Cover INSUL R11K 15IN X 70.5FT ROLL
Provides a 90? connection for medium/heavy duty applications; stronger than angled nailing or screw fastening; help ensure joints are consistently straight and strong. Fits plastic and metal area walls with a width of 37" and a projection of 16". Load bearing-holds over 500 lbs. Easy to install. Fits Window Wells No.75204 (sku 901.7187), 75208 (sku 001.0561) and 75210 (sku 303.0913). 18" x 18" x 42". Kraft faced rolls - "Greenguard" certified LEED eligible.
LL Buildsite Traditional TR475 Ornamental Railing USP Lumber JL24 Standard Joist Hanger LL Buildsite Metropolitan MR450 Ornamental Railing
Classic railing design featuring a 4" On Center Twisted Spindle. Installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor Flange and No-Drill Connector. Installed height 36" full panel. G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Contemporary railing design featuring a 4" On Center 1/4" x 1/4" Vertical Pickets; installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor flange and no-drill connector; installed height 36" full panel.
Deckmaster DMP125-10 Hidden Deck Bracket Kit USP Lumber MP34 Framing Angle INSUL R13K 15IN X 93IN BATT
System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies. For: 3/4" thick boards, composites less than 1-1/8", and any hollowcore composites. Consumer pack includes: 10 brackets, (120) 10 x 1" deck board screws, (110) 8 x 1" joist screws, and a pro bit tip. Use for joist/header installations. Does not have tabs. G90 galvanizing finish. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505; ICBO 5736; DSA PA-076; Dade County, FL 01-0417.11; and  L.A. City RR25303 codes. 18 Gauge. Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible.
INSUL R19K 23IN X 94IN BATT   USP Lumber RT7A Double Plate Hurricane/Seismic Anchor INSUL R19K 23IN X 39.16FT ROLL
Kraft Faced Pro Cut Batts - "Greenguard" certified LEED eligible. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Kraft faced rolls - "Greenguard" certified LEED eligible.
USP Lumber JL26 Standard Joist Hanger Vestal H88 Cleanout Door USP Lumber RT3A Double Plate Hurricane/Seismic Anchor
G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Allows debris to be swept and removed that has collected in the chimney. USA made. Ties trusses and rafters to top plates either left or right handed. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. G90 galvanizing finish. Requires 8d nails for installation in plate and rafter/truss. Meets ICC-ES ESR-1465 and FL817 codes. 18 Gauge.
Vestal 128 Cleanout Door USP Lumber JUS28 Double Shear Slant Joist Hanger Hopkins 90110 Comfortable Flip Top Bench Table
Allows debris to be swept and removed that has collected in the chimney. USA made. Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Make a comfortable, sturdy bench and a table up to 8' long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance free structural resin. Use only one or slide two Bench Tables together for a full size picnic table. Good for small porches and decks. Assembled unit stands 34"H in the bench position, 31"H in the table position and both with 17.5"H seat. Includes Bench Table legs, hardware and instructions. LUMBER NOT INCLUDED.
INSUL R11K 23IN X 70.5FT ROLL USP Lumber RT Hurricane/Seismic Anchor USP Lumber JL28 Standard Joist Hanger
Kraft faced rolls - "Greenguard" certified LEED eligible. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber RT8A Double Plate Hurricane/Seismic Anchor USP Lumber ST1-TZ Mud Sill Anchor LL Buildsite Traditional TR675 Ornamental Railing
Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc anchors (310.1573) requires 8d HDG nails and Gold Coat anchors (947.3265) requires N8-GC nails.  Meets ICC-ES ESR-1465 and FL817 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For securing mudsills and framing into concrete slabs or poured stemwalls. Not for block installation or securing concrete sections together between cold joints. Features prebent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets  NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Classic railing design featuring a 4" On Center Twisted Spindle. Installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor Flange and No-Drill Connector. Installed height 36" full panel.
USP Lumber JA1 Joist Angle USP Lumber JA1-TZ Framing Angle U-CLIP 2X-2X TRIPLE ZINC
Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 Gauge. Used to strengthen framing in various applications or to support joists where stirrup style hangers cannot be installed. Requires 10d x 1-1/2 nails for installation. Meets ICBO, SBCCI, BOCA - NER 505; L.A. City RR25303, DSA PA-076; and Dade County, FL 98-0421.06 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. 16 Gauge. A clip connects a 2x wood member to the face of another wood member; 20 gauge; G-185 galvanizing finish; requires (6) USP LumberLok LL915 (#9 x 1-3/8" long) wood screws not included.
USP Lumber KHL33 Heavy Joist Angle TVM 2220-24-50 Double Bubble Construction Insulation INSUL R30K 16IN X 48IN BATT
Designed for heavy-duty reinforcement of 90 degree framing intersections. USP primer finish. Requires (2) 5/8" bolts for installation. Meets ICBO 2725, L.A. City RR 25104. 7 Gauge. Safe to use; non-toxic; easy to install.  Does not require special protective clothing.  Lowers air conditioning/heating costs.  5/16? thick, multi layer, double bubble reflective insulation in rolls of various widths and lengths.  Reflects 94% of radiant heat. Class 1, Class A fire rating.  Seams should be sealed with TVM Metalized Tape for maximum effectiveness. Kraft faced batts; "Greenguard" certified LEED eligible.
USP Lumber JUS28-TZ Double Shear Slant Joint Hanger Hopkins 90158 Workbench Kit USP Lumber JUS210 Double Shear Slant Joist Hanger
Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8'L x 4'W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90-degree cuts required, no miter or angles. Made of structural resin.  Kit includes: 4 legs, hardware and instructions. LUMBER AND SHELF LINKS NOT INCLUDED. Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber BL Corner Brace USP Lumber JL210 Standard Joist Hanger HANGER RIDGE RAFTER 18 GAUGE
Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge. G90 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Supports rafter pitches up to 7:12 (30?). Nesting top flange for installation on 2x support beams. Use all specified fasteners. The rafter end at the ridge must be plumb cut to achieve published loads. Optional diamond nail holes can be used to faster RR to end of rafter before settling rafter into place.
USP Lumber JUS24 Double Shear Slant Joist Hanger INSUL R30K 24IN X 48IN BATT   USP Lumber JUS24-TZ Double Shear Slant Joint Hanger
Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Kraft faced batts; "Greenguard" certified LEED eligible. Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber RT15 Double Plate Hurricane/Seismic Anchor USP Lumber MPA1 Framing Angle ANGLE 2X-2X TRIPLE ZINC 16GA
Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc finish requires 8d HDGnails for installation in plate and rafter/truss and Gold Coat anchor requires N8-GC nails. 1-9/16"W x 2-5/8"H opening. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Contractors charts in the Orgill paper catalog R7 for reference pages. 18 GAUGE - 5-1/4"H. Use for joist to header, rafter to plate, stud to plate or 1" foamboard installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and  L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. An angle connects two 2x wood members at 90? angles; G185 galvanizing finish; requires (8) USP LumberLok LL915 (#9 x 1-3/8" long) wood screws not included.
USP Lumber JUS26 Double Shear Slant Joist Hanger USP Lumber JUS26-TZ Double Shear Slant Joint Hanger USP Lumber RT Hurricane/Seismic Anchor
Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Ties trusses and rafters to top plates. Can use to tie wood framing members to resist uplift and lateral forces. Seismic, tested for lateral movement. Triple Zinc finish requires 8d HDGnails for installation in plate and rafter/truss and Gold Coat anchor requires N8-GC nails. 1-9/16"W x 2-5/8"H opening. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Contractors charts in the Orgill paper catalog R7 for reference pages. 18 GAUGE - 5-1/4"H.
USP Lumber MPA1 Framing Angle Debri-Shield AW115 Repla K Gutter Guard Raingo RW115 Gutter Guard
Use for joist to header, rafter to plate, stud to plate or 1" foamboard installations. Achieves continuous load path in high wind and seismic resistant construction. Enables quick field adjustments for 2 and 3-way connections. Tabs enable two and three-way connections. Bend tabs only once. Requires 8d x 1-1/2 nails. Meets SBCCI, BOCA - NER 505, ICBO 5736, DSA PA-076, Dade County, FL 01-417.11 and  L.A. City RR25303 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For use with Repla K and aluminum gutter systems to prevent leaves and other debris from entering the gutter system. Non-metallic. For Raingo systems only to prevent leaves and other debris from entering the gutter system. Non-metallic.
USP Lumber JUS210-TZ Double Shear Slant Joint Hanger USP Lumber JUS26-2 Double Shear Slant Support Joist Hanger Maccourt W4214 Elongated Type H Window Well Cover
Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Manufactured from impact resistant plastic. Improves basement insulation. Keeps out rain, snow, and debris.
Amerimax 85279BX Snap-In Gutter Guard Amerimax 85270BX Snap-In Gutter Guard LL Buildsite Metropolitan MR650 Ornamental Railing
3' plastic mesh protects gutter, downspout and drain from leaves, stones and other debris. Slides under the shingles and hooks to the front edge of the gutter. Made of rigid PVC. Will not collapse under debris. No special tools required. Fits standard "K" style aluminum, steel or plastic gutters. Fits 4", 5" and 6" gutters. Dimensions: 36"L x 6.5"W x .5"H. 3' plastic mesh protects gutter, downspout and drain from leaves, stones and other debris. Slides under the shingles and hooks to the front edge of the gutter. Made of rigid PVC. Will not collapse under debris. No special tools required. Fits standard "K" style aluminum, steel or plastic gutters. Fits 4", 5" and 6" gutters. Dimensions: 36"L x 6.5"W x .5"H. Contemporary railing design featuring a 4" On Center 1/4" x 1/4" Vertical Pickets; installs using other Village Ironsmith accessories such as Metropolitan/Traditional Newel post, Floor flange and no-drill connector; installed height 36" full panel.
Maccourt Window Well Cover USP Lumber TFL2595 Joist Hanger USP Lumber BL Reinforcement Corner Brace
Fits over window wells of 40" or less in length projecting 16" or less from house. Improves basement insulation. Keeps out rain, snow and debris. Made of durable, impact-resistant plastic. One size fits both circular and rectangular configurations. Features 1-1/2" top flange depth that accommodates all header types as well as back-to-back installations. Features "Seat Cleat" for quick, positive seating. G90 galvanizing finish. Meets ICC-ES ESR-1831 codes. Header requires (6) 10d nails and joist requires (2) 10d x 1-1/2 nails for installation. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnectors.com. 18 Gauge. Reinforces 90 degree wood-to-wood connections. G90 galvanizing finish. Requires 16d nails for installation. 12 Gauge.
USP Lumber ST2-TZ Mud Sill Anchor Vestal 42 Poker Control Fireplace Damper 6 in H USP Lumber JUS26-2TZ Double Shear Slant Joint Hanger
For securing mudsills and framing into concrete slabs, poured stemwalls, or concrete block. Not for securing concrete sections together between cold joints. Features prebent base flange for proper anchoring into concrete. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets NER 530 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Complete with cast iron valve plate and 5-position poker control detached and bolted to body. Coated with black corrosion-resistant paint. No. 30 - Throat Dimensions: 30" front, 23" back, 10" depth - Overall Dimensions: 34" front, 26-3/4" back 13-1/2" depth. No. 36 - Throat Dimensions: 36" front, 29" back, 10" depth - Overall Dimensions: 40" front, 32-3/4" back 13-1/2" depth. No. 42 - Throat Dimensions: 42" front, 35" back, 10" depth - Overall Dimensions: 46" front, 38-3/4" back 13-1/2" depth. USA made. Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber JUS210-2 Double Shear Slant Support Joist Hanger USP Lumber TFL20118 Joist Hanger USP Lumber JUS28-2 Double Shear Slant Joist Hanger
Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Features 1-1/2" top flange depth that accommodates all header types as well as bact-to-back installations. Features "Seat Cleat" for quick, positive seating. G90 galvanizing finish. Meets ICC-ES ESR-1831. Header requires (6) 10d nails and joist requires (2) 10d x 1-1/2" nails for installation. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnectors.com. 18 Gauge. Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber SCA Stair Angle TVM 2220-48-50 Double Bubble Construction Insulation USP Lumber TFL25118 Joist Hanger
Simplifies stair construction and eliminate the need to calculate and notch stair stringers. Stronger and safer than wood blocking, and the angle and fasteners are hidden from view. Use the SCA9 for single 2x10 stair treads and SCA10 for double 2 x 6 stair treads. Requires 1/4" x 1-1/2" lag bolts. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information on installation, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Safe to use; non-toxic; easy to install.  Does not require special protective clothing.  Lowers air conditioning/heating costs.  5/16? thick, multi layer, double bubble reflective insulation in rolls of various widths and lengths.  Reflects 94% of radiant heat. Class 1, Class A fire rating.  Seams should be sealed with TVM Metalized Tape for maximum effectiveness. Features 1-1/2" top flange depth that accommodates all header types as well as back-to-back installations. Features "Seat Cleat" for quick, positive seating. G90 galvanizing finish. Meets ICC-ES ESR-1831 codes. Header requires (6) 10d nails and joist requires (2) 10d x 1-1/2 nails for installation. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnectors.com. 18 Gauge.
USP Lumber RT10 Double Plate Hurricane/Seismic Anchor USP Lumber CSH-TZ Concealed Stringer Hanger USP Lumber BP583 Standard Bearing Plate
Used to tie wood framing members to resist uplift and lateral forces. G90 galvanizing finishing. Requires 8d nails for installation. Meets ICC-ES ESR-1465, FL817 and Dade County, FL 07-0306.10 codes. 18 Gauge. Concealed stair stringer hanger provides a method of connecting a stringer with a hidden hanger. The seat of the hanger is adjustable to match the slope of the stair stringer. Triple Zinc finish. Requires (8) 10d x 1-1/2 HDG nails for header and (5) 10d x 1-1/2 HDG nails for joist. 18 Gauge. Pending IAPMO-ES evaluation. Designed to meet code requirements for mudsill-to-foundation and stud-to-foundation connections.
USP Lumber WE44-TZ Wet Post Anchor USP Lumber RT16A Double Plate Hurricane/Seismic Anchor USP Lumber HBPS12 Slotted Bearing Plate
Secures posts to concrete in light-duty and medium-duty applications such as patio covers, carports or decks. Formed, one-piece design includes embossing for additional lateral strength. Not  for fence posts or other unrestrained (not fixed or fastened at top) applications. Not designed to resist overturning (moment) loads. Requires (2) 1/2" HDG bolts or (12) HDG nails for fastening to post. Meets SBCCI, BOCA - NER 530 & NER 608, ICBO 5700, ICBO 2039, ICBO 5531, FL821, FL822, L.A. City RR 25337, and DSA PA-076 codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Anchor tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Typical Truss/rafter to double plate installation. Requires Meet ICC-ES ESR-1465 and FL817 codes. Offers anchor bolt adjustment slots.
USP Lumber A3 Framing Angle Amerimax 86270BX Snap-In Gutter Filter Amerimax 86279BX Snap-In Gutter Filter
Eliminates toenailing and increases strength. Requires 10d x 1-1/2" nails for installation. 1-7/16"W1 X 1-7/16"W2 X 2-3/4"L - 18 GAUGE. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. Made of rigid PVC. Will not collapse under debris. 3' sections fit standard "K" style aluminum, steel, or plastic gutters. Installs by snapping on to front edge of gutter. Prevents leaves, twigs, and other debris from falling into gutters and clogging both the gutters and downspouts. Made of rigid PVC. Will not collapse under debris. 3' sections fit standard "K" style aluminum, steel, or plastic gutters. Installs by snapping on to front edge of gutter. Prevents leaves, twigs, and other debris from falling into gutters and clogging both the gutters and downspouts.
Henry HE102406 1-Part Aqua Primer USP Lumber SCA Stair Angle USP Lumber JUS26-GC Double Shear Slant Joist Hanger
A polymer emulsion based primer for self-adhered membranes such as "modifiedPLUS", "SA, Blueskin, "SA, Blueskin PE200HT", "Blueskin WP 200" and "Low-Slope"; dries quickly; provides positive adhesion; not for sale in Southern CA; coverage: up to 500 sq ft/gal depending on porosity and texture of surface. Simplifies stair construction and eliminate the need to calculate and notch stair stringers. Stronger and safer than wood blocking, and the angle and fasteners are hidden from view. Use the SCA9 for single 2x10 stair treads and SCA10 for double 2 x 6 stair treads. Requires 1/4" x 1-1/2" lag bolts. Meets ICC-ES ESR-1280, FL11664 and L.A. City RR25749 codes. For additional information on installation, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Double shear nailing for fewer nails and faster installation. Dimples allow for 30 to 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade County, FL 11-0510.01 and 07-0419.01codes. For additional information including allowable loads and fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber HCPRS Hurricane/Seismic Anchor USP Lumber JDS24-S Double Shear Single Purlin Hanger USP Lumber THF25112 Joist Hanger
Used to tie trusses and rafters to top plates, and may be used to tie wood framing members to resist uplift and lateral forces. G90 galvanizing finish. 1-9/16"W opening. Meets ICC-ES ESR-1881, FL821 and L.A. City RR25779 codes. 18 Gauge - 5-1/4"W. Designed for quick installation of purlins between rafters, joists or trusses in post and beam structures. One-piece construction assures a consistent flush fit between purlin and joist or rafter. A reinforced "double lap" seat boosts the load capacity of this heavy-duty purlin hanger. Requires (2) 10d x 1-1/2"nails for header and (2) 10d nails for each purlin. Features a 3/4" top fold; pending IAMPO-ES evaluation. Designed to provide lateral support for the top chords of I-Joists in depths up to 16". G90 galvanizing finish. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Install 10d x 1-1/2" nails into joist through raised dimple at 45 degree angle. For THF Min, fill all round nail holes. For THF Max, fill all round and diamond holes. For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnectors.com.
USP Lumber LSSH15-TZ Slope/Skew Joist Hanger USP Lumber JUS28-2TZ Double Shear Slant Joist Hanger USP Lumber SKH28L Skewed Left Joist Hanger
Connects rafters to ridge beams in vaulted roof structures; field adjustable to meet a variety of skew and slope applications; slopes to any pitch to 45 degrees up or down and skews up to 45 degrees right or left.  For information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For additional sizing information, visit www.uspconnectors.com. 18 Gauge. Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments.
USP Lumber SKH28R Skewed Right Joist Hanger USP Lumber MP9-TZ Framing Angle Amerimax GGGLK5 Hinged Gutter Guard
Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. May be field adjusted by hand from 0 to 135 degrees, giving framers and do-it-yourselfers flexibility in applications. Bend angle only once. G90 galvanized finish. 10d HDG nails required for installation. Meets SBCCI, BOCA - NER 530, ICBO 5700, FL822, L.A. City RR 25337, DSA PA-06 codes. Made of galvanized steel. Convex design prevents debris accumulation. Will not collapse under ice, snow, or debris. No tools needed for installation. 3' sections fit any standard "K" style gutters. Hinges clip to the front of the gutter. Helps prevent leaves, twigs, and other debris from falling into the gutters and clogging both the gutters and downspouts.
Amerimax 85320 Gutter Cover USP Lumber SKH26R-TZ Skewed Right Joist Hanger USP Lumber SKH26L-TZ Skewed Left Joist Hanger
Water flows around nose of solid gutter cover and into gutter through slotted channel. Helps keep leaves, pine needles, and other debris out of the gutter. 4' sections install in 4", 5", and 6" metal gutters. Slides under shingles and hooks to the front edge of the gutter. No special tools required. Flex design accommodates many different pitched roofs. Made of rigid PVC. Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments.
USP Lumber AC9-TZ Framing Angle USP Lumber AC5-TZ Framing Angle Deckmaster DMP100-100 Hidden Deck Bracket Kit
For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies.  Contractor pack includes: 100 brackets, (1200) 10 x 1-1/4" deck board screws, (1100) 8 x 1" joist screws, and a pro bit tip. Use the Contractor pack for large decks.
Deckmaster DMP125-100 Hidden Deck Bracket Kit USP Lumber TDX2-TZ Holdown USP Lumber AC Framing Angle
System eliminates the damage to deck boards by hiding all fasteners beneath deckboards. Holds boards tight to eliminate any surface penetration. No moisture can enter deckboards or joists and cause nail penetration. No moisture can enter deckboards or joists and cause nail or screw pop-ups or deck rot. No stains or splinters form around fastener holes. Corrosion resistance. Powder coating's natural wood color blends with the understructure of balconies.  Contractor pack includes: 100 brackets, (1200) 10 x 1-1/4" deck board screws, (1100) 8 x 1" joist screws, and a pro bit tip. Use the Contractor pack for large decks. Used to tie first and second story framing together, anchor studs to foundations or to tie purlins to masonry or concrete. Features self-jigging, formed design with code required distances built-in. Requires 7/8", 5/8, and 3/4" bolts for installation. Meets IAPMO-ES ER-0200 and FL14500 codes. For additional information including allowable loads and number of fastener, please see USP Lumbar Connectors charts in the Orgill paper catalog R7 Reference Pages. For general-purpose reinforcements of many framing connections. G185 galvanized finish. Can be used in both new construction and retrofit applications. Staggered nail patterns reduce wood splitting and allows installation on both sides of the supported member. Triple Zinc clips require 10d HDG or 16d HDG nails.  Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber STS1 Single Stud Joist Hanger Greenfiber INS541LD Low Dust Loose Fill Construction Insulation
Typically used with 2" OD pipe to reinforce joists, plates, studs, or rafters which have been drilled or notched during construction. Not for total member replacement in structural applications. G90 galvanized finish. Single stud requires ten 10d x 1-/12 fasteners and double stud requires twelve 10d and  2" maximum hole size. Blow-in fiber insulation designed for loose-fill attic applications covers 40 sq. ft. at  R-19. Made of 85 percent recycled paper fibers treated for fire resistance. SCS certified and meets ASTM C-739 and ASTM E-84. For use in attics, floors, and walls of residential new construction and re-insulation applications. Provides thermal performance and sound control. Provides a barrier against air infiltration by filling gaps and voids. Dry installation only - do not add water.
   
 
1