Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS > FENCE BRACKETS
Choose a sub category:
HOUSEWRAP INSULATION SILL SEAL
WATERPROOF MEMBRANES & ACCESSO FIREPLACE HARDWARE WINDOW WELLS
WINDOW WELL COVERS FORMED METALS/METAL EAVE DRIPS EAVE DRIPS/DRIP EDGES-VINYL
ROLL VALLEY / FLASHINGS WINDOW/DOOR FLASHING TAPE PIPE FLASHINGS
SHIMS DECORATIVE COLUMNS ATTIC LADDERS
DECK PIERS/CONCRETE PIERS ROOFING SHINGLE CUTTERS
ACCESS DOORS GARAGE DOORS GARAGE DOOR OPENERS & ACCESSOR
GARAGE DOOR CONTROLS - SMART
Sort By:
1
RH Tamlyn PC1532 Plywood Clip RH Tamlyn PCS716 Plywood Clip RH Tamlyn PCS12 Plywood Clip
With built-in spacer for use when support spacing exceeds the maximum length of an unsupported edge. Boxed. Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed.
RH Tamlyn PCS1532 Plywood Clip RH Tamlyn PCS58 Plywood Clip USP Lumber RS20-R Coiled Strap
Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Replace wood blocking on roof sheathing. Tight fit for positive installation. Embossed dimples provide 1/8" gap needed to prevent panels from popping up as sheathing expands. G60 galvanizing finish. 20 Gauge - Boxed. Enables cut-to-length convenience for job site needs. G90 galvanizing finish. 1-1/2" nail spacing. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Acorn NSR3418 Round Nail Stake Permaguard 83100 House Wrap USP Lumber ST12 Strap Tie
Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. A moisture, air barrier house wrap which consists of a spun-bonded non-woven polypropylene fabric with a monolithic polymer coating on one side. The product resists the passage of water but permits the passage of water vapor. Has a Class A fire rating and a Perm rate of 11 perms. Can remain exposed to the elements for up to 6 months; meets the ICC code ICC-ESR 2235 as well as Canadian Construction Materials Centre (CCMC) 13292-R/13329-R. Mill thickness is 17 mils. Connects wood framing to resist tension forces. G90 galvanizing finish. ST Medium-duty series require 16d nails for installation. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. 16 Gauge.
STRAP TIE 3 X 7IN TRIPLE ZINC Acorn NSR3424 Round Nail Stake Simpson Strong-Tie LSTA Light Duty Strap Tie
Medium capacity; requires (20) 10d x 1-1/2" HDG nails for installation. Meets 130 codes. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Permapro 509100 PRO House Wrap STAKE NAIL ROUND 3/4X30IN     USP Lumber LSTA12 Light Capacity Strap Tie
STAKE NAIL ROUND 3/4X30IN
Our Price: $58.45
Stops winds from robbing homes of their energy and insulation values. Reduces the air exchange that occurs in homes as air moves through the wall cavities. Tiny micro perforations also allow the release of water vapor to help prevent any moisture condensation. Water resistant air infiltration barrier is lightweight and easy to install, yet is strong and durable which reduces jobsite waste. 5.0 Mil. Thickness. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
Permapro 510100 PRO House Wrap STAKE NAIL ROUND 3/4X36IN     STRAP TIE 3-1/4X16IN TRI-ZINC
STAKE NAIL ROUND 3/4X36IN
Our Price: $70.48
Stops winds from robbing homes of their energy and insulation values. Reduces the air exchange that occurs in homes as air moves through the wall cavities. Tiny micro perforations also allow the release of water vapor to help prevent any moisture condensation. Water resistant air infiltration barrier is lightweight and easy to install, yet is strong and durable which reduces jobsite waste. 5.0 Mil. Thickness. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Wide strapping; requires (16) WS15-HDG nails for installation. Meets 110 codes.
USP Lumber LSTA18 Light Capacity Strap Tie USP Lumber MSTA18-TZ Medium Capacity Strap Tie Permaguard 9100 Translucent House Wrap
Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Requires 10d nails for installation. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Lightweight and translucent, installs easily. Designed for permeability, allows vapor to escape instead of building-up potentially deteriorating wall-system components. Hangs tough before, during and after installation. Woven design resists tears and rips that can occur during installation or in windy conditions. UV stabilization protects against exposure to the sun, which can weaken other housewraps. Can remain exposed to the elements for up to a year without significant loss of strength or durability. 6.5 Mil. Thickness.
Permapro 509150 PRO House Wrap USP Lumber FB24-TZ Fence Bracket USP Lumber T6-TZ T-Post Strap
Stops winds from robbing homes of their energy and insulation values. Reduces the air exchange that occurs in homes as air moves through the wall cavities. Tiny micro perforations also allow the release of water vapor to help prevent any moisture condensation. Water resistant air infiltration barrier is lightweight and easy to install, yet is strong and durable which reduces jobsite waste. 5.0 Mil. Thickness. Provides stronger fence connections and simplifies fence assembly. Can be installed before posts are set to help ensure uniform spacing and alignment. Requires five 6d HDG fasteners for rails and three 8d HDG fasteners for posts. Medium-duty straps connect beams to posts. Requires either (3) 1/2" bolts or (12) 16d nails for installation. Triple Zinc straps require HDG bolts or 16d HDG nails for installation.
USP Lumber T6 T-Post Strap USP Lumber L6TZ L-Post Strap USP Lumber LSTA24 Light Capacity Strap Tie
Medium-duty straps connect beams to posts. Requires either (3) 1/2" bolts or (12) 16d nails for installation. Triple Zinc straps require HDG bolts or 16d HDG nails for installation. Medium-duty straps connect beams to posts. Requires either 1/2" bolts or 16d nails for installation. Triple Zinc straps require HDG bolts or 16d HDG nails for installation. Connects wood framing to resist tension forces. G90 galvanizing finish. LSTA Light-duty Series require 10d nails for installation. Designed for use with 1-1/2"W framing members, including I-Joist flanges. Meets ICC-ES ESR-1781 codes. For additional information including allowable loads and number of fasteners, Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber RS150 Coiled Strap USP Lumber MSTA24-TZ Medium Capacity Strap Tie Permaguard 9150 Translucent House Wrap
Enables cut-to-length convenience for job site needs. G90 galvanizing finish. 1-1/2" nail spacing. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Requires 10d nails for installation. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Lightweight and translucent, installs easily. Designed for permeability, allows vapor to escape instead of building-up potentially deteriorating wall-system components. Hangs tough before, during and after installation. Woven design resists tears and rips that can occur during installation or in windy conditions. UV stabilization protects against exposure to the sun, which can weaken other housewraps. Can remain exposed to the elements for up to a year without significant loss of strength or durability. 6.5 Mil. Thickness.
Permaguard 89100 House Wrap USP Lumber FA3-TZ Foundation Anchor Permaguard 9195 Translucent House Wrap
A moisture, air barrier house wrap which consists of a spun-bonded non-woven polypropylene fabric with a monolithic polymer coating on one side. The product resists the passage of water but permits the passage of water vapor. Has a Class A fire rating and a Perm rate of 11 perms. Can remain exposed to the elements for up to 6 months; meets the ICC code ICC-ESR 2235 as well as Canadian Construction Materials Centre (CCMC) 13292-R/13329-R. Mill thickness is 17 mils. For securing mudsills and framing into concrete slabs. Do not rely-on for securing concrete sections together between cold joints. Features split flange for nailing to both mudsill and stud for greater framing versatility. Use a minimum of 2 anchors per mudsill within 12" of the end of each section. Meets ICC-ES ESR-2787 codes For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Lightweight and translucent, installs easily. Designed for permeability, allows vapor to escape instead of building-up potentially deteriorating wall-system components. Hangs tough before, during and after installation. Woven design resists tears and rips that can occur during installation or in windy conditions. UV stabilization protects against exposure to the sun, which can weaken other housewraps. Can remain exposed to the elements for up to a year without significant loss of strength or durability. 6.5 Mil. Thickness.
USP Lumber LTW12 Light Capacity Twist Strap USP Lumber WBT Flat Wall Brace USP Lumber T12 T-Post Strap
Use to tie framing members to resist tension forces as in stud plate-rim joist and truss-to-top-plate installations. Flat transition bend, for easy installation, splits total length into 2 separate, equal lengths (L1 & L2). G90 galvanizing finish. Requires an equal number of 10d or 10d x 1-1/2 fasteners at each end. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. For use on stud walls to resist racking during framing. Can be used to replace code prescribed 1 x 4 wood let-in bracing as a framing aid. Rolled edges and t-style design give strength, rigidity, and eliminate sharp, sheared edges. Framing aid only; Not a substitute for structural shearwall components. G90 galvanizing finish. Requires two 8d nails for each plate, one 8d nail for each stud. 511-pound max for No.WBT12. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. Max load is the max load vector applied at top of stud wall section, not to exceed 25'L, resisted by the combination of wall brace straps installed. Load based on lumber with a 0.50 specific gravity and 19% or less moisture content. 22 Gauge. Medium-duty straps connect beams to posts. Requires either (3) 1/2" bolts or (12) 16d nails for installation. Triple Zinc straps require HDG bolts or 16d HDG nails for installation.
USP Lumber MSTA36-TZ Medium Capacity Strap Tie USP Lumber MTW18 Medium Capacity Twist Strap
Requires 10d nails for installation. Meets ICC-ES ESR-1781, FL13285 and L.A. City RR25843 codes. Use to tie framing members to resist tension forces as in stud plate-rim joist and truss-to-top-plate installations. Flat transition bend, for easy installation, splits total length into 2 separate, equal lengths (L1 & L2). G90 galvanizing finish. Requires an equal number of 10d or 10d x 1-1/2 fasteners at each end. Meets ICC-ES ESR-2104, FL820 and L.A. City RR25745 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
   
 
1